aws-cdk-lib 2.220.0__py3-none-any.whl → 2.221.0__py3-none-any.whl

aws_cdk/aws_ram/__init__.py

@@ -1156,3 +1156,6 @@ def _typecheckingstub__2e8df76745e5c0758e8b5233e879c50ee5a6f6f817a0850af55da2744
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IPermissionRef, IResourceShareRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_rbin/__init__.py

@@ -1035,3 +1035,6 @@ def _typecheckingstub__d5cb70d54df5cb782865dd65947c16d9455e200989ec0b11ea250d281
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IRuleRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_rds/__init__.py

@@ -712,7 +712,7 @@ cloudwatch.Alarm(self, "HighCPU",
 fn = lambda_.Function(self, "Function",
     code=lambda_.Code.from_inline("exports.handler = (event) => console.log(event);"),
     handler="index.handler",
-    runtime=lambda_.Runtime.NODEJS_18_X
+    runtime=lambda_.Runtime.NODEJS_20_X
 )
 
 availability_rule = instance.on_event("Availability", target=targets.LambdaFunction(fn))
@@ -790,7 +790,7 @@ cloudwatch.Alarm(self, "HighCPU",
 fn = lambda_.Function(self, "Function",
     code=lambda_.Code.from_inline("exports.handler = (event) => console.log(event);"),
     handler="index.handler",
-    runtime=lambda_.Runtime.NODEJS_18_X
+    runtime=lambda_.Runtime.NODEJS_20_X
 )
 
 availability_rule = instance.on_event("Availability", target=targets.LambdaFunction(fn))
@@ -5422,7 +5422,7 @@ class CfnDBClusterProps:
         :param port: The port number on which the DB instances in the DB cluster accept connections. Default: - When ``EngineMode`` is ``provisioned`` , ``3306`` (for both Aurora MySQL and Aurora PostgreSQL) - When ``EngineMode`` is ``serverless`` : - ``3306`` when ``Engine`` is ``aurora`` or ``aurora-mysql`` - ``5432`` when ``Engine`` is ``aurora-postgresql`` .. epigraph:: The ``No interruption`` on update behavior only applies to DB clusters. If you are updating a DB instance, see `Port <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-rds-database-instance.html#cfn-rds-dbinstance-port>`_ for the AWS::RDS::DBInstance resource. Valid for: Aurora DB clusters and Multi-AZ DB clusters
         :param preferred_backup_window: The daily time range during which automated backups are created. For more information, see `Backup Window <https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/Aurora.Managing.Backups.html#Aurora.Managing.Backups.BackupWindow>`_ in the *Amazon Aurora User Guide.* Constraints: - Must be in the format ``hh24:mi-hh24:mi`` . - Must be in Universal Coordinated Time (UTC). - Must not conflict with the preferred maintenance window. - Must be at least 30 minutes. Valid for: Aurora DB clusters and Multi-AZ DB clusters
         :param preferred_maintenance_window: The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC). Format: ``ddd:hh24:mi-ddd:hh24:mi`` The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see `Maintaining an Amazon Aurora DB cluster <https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/USER_UpgradeDBInstance.Maintenance.html#AdjustingTheMaintenanceWindow.Aurora>`_ in the *Amazon Aurora User Guide.* Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun. Constraints: Minimum 30-minute window. Valid for: Aurora DB clusters and Multi-AZ DB clusters
-        :param publicly_accessible: Specifies whether the DB cluster is publicly accessible. When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its Domain Name System (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it. When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address. Valid for Cluster Type: Multi-AZ DB clusters only Default: The default behavior varies depending on whether ``DBSubnetGroupName`` is specified. If ``DBSubnetGroupName`` isn't specified, and ``PubliclyAccessible`` isn't specified, the following applies: - If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB cluster is private. - If the default VPC in the target Region has an internet gateway attached to it, the DB cluster is public. If ``DBSubnetGroupName`` is specified, and ``PubliclyAccessible`` isn't specified, the following applies: - If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB cluster is private. - If the subnets are part of a VPC that has an internet gateway attached to it, the DB cluster is public.
+        :param publicly_accessible: Specifies whether the DB cluster is publicly accessible. Valid for Cluster Type: Multi-AZ DB clusters only When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its domain name system (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is controlled by its security group settings. When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address. The default behavior when ``PubliclyAccessible`` is not specified depends on whether a ``DBSubnetGroup`` is specified. If ``DBSubnetGroup`` isn't specified, ``PubliclyAccessible`` defaults to ``true`` . If ``DBSubnetGroup`` is specified, ``PubliclyAccessible`` defaults to ``false`` unless the value of ``DBSubnetGroup`` is ``default`` , in which case ``PubliclyAccessible`` defaults to ``true`` . If ``PubliclyAccessible`` is true and the VPC that the ``DBSubnetGroup`` is in doesn't have an internet gateway attached to it, Amazon RDS returns an error.
         :param replication_source_identifier: The Amazon Resource Name (ARN) of the source DB instance or DB cluster if this DB cluster is created as a read replica. Valid for: Aurora DB clusters only
         :param restore_to_time: The date and time to restore the DB cluster to. Valid Values: Value must be a time in Universal Coordinated Time (UTC) format Constraints: - Must be before the latest restorable time for the DB instance - Must be specified if ``UseLatestRestorableTime`` parameter isn't provided - Can't be specified if the ``UseLatestRestorableTime`` parameter is enabled - Can't be specified if the ``RestoreType`` parameter is ``copy-on-write`` This property must be used with ``SourceDBClusterIdentifier`` property. The resulting cluster will have the identifier that matches the value of the ``DBclusterIdentifier`` property. Example: ``2015-03-07T23:45:00Z`` Valid for: Aurora DB clusters and Multi-AZ DB clusters
         :param restore_type: The type of restore to be performed. You can specify one of the following values:. - ``full-copy`` - The new DB cluster is restored as a full copy of the source DB cluster. - ``copy-on-write`` - The new DB cluster is restored as a clone of the source DB cluster. If you don't specify a ``RestoreType`` value, then the new DB cluster is restored as a full copy of the source DB cluster. Valid for: Aurora DB clusters and Multi-AZ DB clusters
@@ -6531,23 +6531,19 @@ class CfnDBClusterProps:
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
         '''Specifies whether the DB cluster is publicly accessible.
 
-        When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its Domain Name System (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it.
-
-        When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address.
-
         Valid for Cluster Type: Multi-AZ DB clusters only
 
-        Default: The default behavior varies depending on whether ``DBSubnetGroupName`` is specified.
+        When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its domain name system (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is controlled by its security group settings.
 
-        If ``DBSubnetGroupName`` isn't specified, and ``PubliclyAccessible`` isn't specified, the following applies:
+        When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address.
 
-        - If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB cluster is private.
-        - If the default VPC in the target Region has an internet gateway attached to it, the DB cluster is public.
+        The default behavior when ``PubliclyAccessible`` is not specified depends on whether a ``DBSubnetGroup`` is specified.
 
-        If ``DBSubnetGroupName`` is specified, and ``PubliclyAccessible`` isn't specified, the following applies:
+        If ``DBSubnetGroup`` isn't specified, ``PubliclyAccessible`` defaults to ``true`` .
 
-        - If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB cluster is private.
-        - If the subnets are part of a VPC that has an internet gateway attached to it, the DB cluster is public.
+        If ``DBSubnetGroup`` is specified, ``PubliclyAccessible`` defaults to ``false`` unless the value of ``DBSubnetGroup`` is ``default`` , in which case ``PubliclyAccessible`` defaults to ``true`` .
+
+        If ``PubliclyAccessible`` is true and the VPC that the ``DBSubnetGroup`` is in doesn't have an internet gateway attached to it, Amazon RDS returns an error.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-rds-dbcluster.html#cfn-rds-dbcluster-publiclyaccessible
         '''
@@ -26295,7 +26291,7 @@ class LicenseModel(enum.Enum):
         fn = lambda_.Function(self, "Function",
             code=lambda_.Code.from_inline("exports.handler = (event) => console.log(event);"),
             handler="index.handler",
-            runtime=lambda_.Runtime.NODEJS_18_X
+            runtime=lambda_.Runtime.NODEJS_20_X
         )
         
         availability_rule = instance.on_event("Availability", target=targets.LambdaFunction(fn))
@@ -28227,7 +28223,7 @@ class OptionGroup(
         fn = lambda_.Function(self, "Function",
             code=lambda_.Code.from_inline("exports.handler = (event) => console.log(event);"),
             handler="index.handler",
-            runtime=lambda_.Runtime.NODEJS_18_X
+            runtime=lambda_.Runtime.NODEJS_20_X
         )
         
         availability_rule = instance.on_event("Availability", target=targets.LambdaFunction(fn))
@@ -28428,7 +28424,7 @@ class OptionGroupProps:
             fn = lambda_.Function(self, "Function",
                 code=lambda_.Code.from_inline("exports.handler = (event) => console.log(event);"),
                 handler="index.handler",
-                runtime=lambda_.Runtime.NODEJS_18_X
+                runtime=lambda_.Runtime.NODEJS_20_X
             )
             
             availability_rule = instance.on_event("Availability", target=targets.LambdaFunction(fn))
@@ -30063,7 +30059,7 @@ class ParameterGroupProps:
             fn = lambda_.Function(self, "Function",
                 code=lambda_.Code.from_inline("exports.handler = (event) => console.log(event);"),
                 handler="index.handler",
-                runtime=lambda_.Runtime.NODEJS_18_X
+                runtime=lambda_.Runtime.NODEJS_20_X
             )
             
             availability_rule = instance.on_event("Availability", target=targets.LambdaFunction(fn))
@@ -35500,6 +35496,12 @@ class SqlServerEngineVersion(
         '''Version "13.00.6465.1.v1".'''
         return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_13_00_6465_1_V1"))
 
+    @jsii.python.classproperty
+    @jsii.member(jsii_name="VER_13_00_6470_1_V1")
+    def VER_13_00_6470_1_V1(cls) -> "SqlServerEngineVersion":
+        '''Version "13.00.6470.1.v1".'''
+        return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_13_00_6470_1_V1"))
+
     @jsii.python.classproperty
     @jsii.member(jsii_name="VER_14")
     def VER_14(cls) -> "SqlServerEngineVersion":
@@ -35662,6 +35664,12 @@ class SqlServerEngineVersion(
         '''Version "14.00.3500.1.v1".'''
         return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_14_00_3500_1_V1"))
 
+    @jsii.python.classproperty
+    @jsii.member(jsii_name="VER_14_00_3505_1_V1")
+    def VER_14_00_3505_1_V1(cls) -> "SqlServerEngineVersion":
+        '''Version "14.00.3505.1.v1".'''
+        return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_14_00_3505_1_V1"))
+
     @jsii.python.classproperty
     @jsii.member(jsii_name="VER_15")
     def VER_15(cls) -> "SqlServerEngineVersion":
@@ -35806,6 +35814,12 @@ class SqlServerEngineVersion(
         '''Version "15.00.4440.1.v1".'''
         return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_15_00_4440_1_V1"))
 
+    @jsii.python.classproperty
+    @jsii.member(jsii_name="VER_15_00_4445_1_V1")
+    def VER_15_00_4445_1_V1(cls) -> "SqlServerEngineVersion":
+        '''Version "15.00.4445.1.v1".'''
+        return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_15_00_4445_1_V1"))
+
     @jsii.python.classproperty
     @jsii.member(jsii_name="VER_16")
     def VER_16(cls) -> "SqlServerEngineVersion":
@@ -35908,6 +35922,12 @@ class SqlServerEngineVersion(
         '''Version "16.00.4210.1.v1".'''
         return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_16_00_4210_1_V1"))
 
+    @jsii.python.classproperty
+    @jsii.member(jsii_name="VER_16_00_4215_2_V1")
+    def VER_16_00_4215_2_V1(cls) -> "SqlServerEngineVersion":
+        '''Version "16.00.4215.2.v1".'''
+        return typing.cast("SqlServerEngineVersion", jsii.sget(cls, "VER_16_00_4215_2_V1"))
+
     @builtins.property
     @jsii.member(jsii_name="sqlServerFullVersion")
     def sql_server_full_version(self) -> builtins.str:
@@ -37000,7 +37020,7 @@ class CfnDBCluster(
         :param port: The port number on which the DB instances in the DB cluster accept connections. Default: - When ``EngineMode`` is ``provisioned`` , ``3306`` (for both Aurora MySQL and Aurora PostgreSQL) - When ``EngineMode`` is ``serverless`` : - ``3306`` when ``Engine`` is ``aurora`` or ``aurora-mysql`` - ``5432`` when ``Engine`` is ``aurora-postgresql`` .. epigraph:: The ``No interruption`` on update behavior only applies to DB clusters. If you are updating a DB instance, see `Port <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-rds-database-instance.html#cfn-rds-dbinstance-port>`_ for the AWS::RDS::DBInstance resource. Valid for: Aurora DB clusters and Multi-AZ DB clusters
         :param preferred_backup_window: The daily time range during which automated backups are created. For more information, see `Backup Window <https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/Aurora.Managing.Backups.html#Aurora.Managing.Backups.BackupWindow>`_ in the *Amazon Aurora User Guide.* Constraints: - Must be in the format ``hh24:mi-hh24:mi`` . - Must be in Universal Coordinated Time (UTC). - Must not conflict with the preferred maintenance window. - Must be at least 30 minutes. Valid for: Aurora DB clusters and Multi-AZ DB clusters
         :param preferred_maintenance_window: The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC). Format: ``ddd:hh24:mi-ddd:hh24:mi`` The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see `Maintaining an Amazon Aurora DB cluster <https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/USER_UpgradeDBInstance.Maintenance.html#AdjustingTheMaintenanceWindow.Aurora>`_ in the *Amazon Aurora User Guide.* Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun. Constraints: Minimum 30-minute window. Valid for: Aurora DB clusters and Multi-AZ DB clusters
-        :param publicly_accessible: Specifies whether the DB cluster is publicly accessible. When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its Domain Name System (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is ultimately controlled by the security group it uses. That public access isn't permitted if the security group assigned to the DB cluster doesn't permit it. When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address. Valid for Cluster Type: Multi-AZ DB clusters only Default: The default behavior varies depending on whether ``DBSubnetGroupName`` is specified. If ``DBSubnetGroupName`` isn't specified, and ``PubliclyAccessible`` isn't specified, the following applies: - If the default VPC in the target Region doesn’t have an internet gateway attached to it, the DB cluster is private. - If the default VPC in the target Region has an internet gateway attached to it, the DB cluster is public. If ``DBSubnetGroupName`` is specified, and ``PubliclyAccessible`` isn't specified, the following applies: - If the subnets are part of a VPC that doesn’t have an internet gateway attached to it, the DB cluster is private. - If the subnets are part of a VPC that has an internet gateway attached to it, the DB cluster is public.
+        :param publicly_accessible: Specifies whether the DB cluster is publicly accessible. Valid for Cluster Type: Multi-AZ DB clusters only When the DB cluster is publicly accessible and you connect from outside of the DB cluster's virtual private cloud (VPC), its domain name system (DNS) endpoint resolves to the public IP address. When you connect from within the same VPC as the DB cluster, the endpoint resolves to the private IP address. Access to the DB cluster is controlled by its security group settings. When the DB cluster isn't publicly accessible, it is an internal DB cluster with a DNS name that resolves to a private IP address. The default behavior when ``PubliclyAccessible`` is not specified depends on whether a ``DBSubnetGroup`` is specified. If ``DBSubnetGroup`` isn't specified, ``PubliclyAccessible`` defaults to ``true`` . If ``DBSubnetGroup`` is specified, ``PubliclyAccessible`` defaults to ``false`` unless the value of ``DBSubnetGroup`` is ``default`` , in which case ``PubliclyAccessible`` defaults to ``true`` . If ``PubliclyAccessible`` is true and the VPC that the ``DBSubnetGroup`` is in doesn't have an internet gateway attached to it, Amazon RDS returns an error.
         :param replication_source_identifier: The Amazon Resource Name (ARN) of the source DB instance or DB cluster if this DB cluster is created as a read replica. Valid for: Aurora DB clusters only
         :param restore_to_time: The date and time to restore the DB cluster to. Valid Values: Value must be a time in Universal Coordinated Time (UTC) format Constraints: - Must be before the latest restorable time for the DB instance - Must be specified if ``UseLatestRestorableTime`` parameter isn't provided - Can't be specified if the ``UseLatestRestorableTime`` parameter is enabled - Can't be specified if the ``RestoreType`` parameter is ``copy-on-write`` This property must be used with ``SourceDBClusterIdentifier`` property. The resulting cluster will have the identifier that matches the value of the ``DBclusterIdentifier`` property. Example: ``2015-03-07T23:45:00Z`` Valid for: Aurora DB clusters and Multi-AZ DB clusters
         :param restore_type: The type of restore to be performed. You can specify one of the following values:. - ``full-copy`` - The new DB cluster is restored as a full copy of the source DB cluster. - ``copy-on-write`` - The new DB cluster is restored as a clone of the source DB cluster. If you don't specify a ``RestoreType`` value, then the new DB cluster is restored as a full copy of the source DB cluster. Valid for: Aurora DB clusters and Multi-AZ DB clusters
@@ -57084,3 +57104,6 @@ def _typecheckingstub__84d6de235f7d15c552af4bc77a663d18a20524641c0cf9a49a093c712
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IAuroraClusterInstance, IClusterEngine, IClusterInstance, ICustomDBEngineVersionRef, IDBClusterParameterGroupRef, IDBClusterRef, IDBInstanceRef, IDBParameterGroupRef, IDBProxyEndpointRef, IDBProxyRef, IDBProxyTargetGroupRef, IDBSecurityGroupIngressRef, IDBSecurityGroupRef, IDBShardGroupRef, IDBSubnetGroupRef, IDatabaseCluster, IDatabaseInstance, IDatabaseProxy, IDatabaseProxyEndpoint, IEngine, IEventSubscriptionRef, IGlobalClusterRef, IInstanceEngine, IIntegrationRef, IOptionGroup, IOptionGroupRef, IParameterGroup, IServerlessCluster, ISubnetGroup]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_redshift/__init__.py

@@ -8564,3 +8564,6 @@ def _typecheckingstub__d636da52cf59446f020e242a88d41b50e55ef8273a113c78f968a7fe2
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IClusterParameterGroupRef, IClusterRef, IClusterSecurityGroupIngressRef, IClusterSecurityGroupRef, IClusterSubnetGroupRef, IEndpointAccessRef, IEndpointAuthorizationRef, IEventSubscriptionRef, IIntegrationRef, IScheduledActionRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_redshiftserverless/__init__.py

@@ -4448,3 +4448,6 @@ def _typecheckingstub__b7cad236eecd67272da075e88f17a1dbdae4ee5083553d6443dcc19b3
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [INamespaceRef, ISnapshotRef, IWorkgroupRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_refactorspaces/__init__.py

@@ -3067,3 +3067,6 @@ def _typecheckingstub__7d86383e689f1caa847c77d7b82f3353251e619448c701919f0bc57ed
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IApplicationRef, IEnvironmentRef, IRouteRef, IServiceRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_rekognition/__init__.py

@@ -1064,27 +1064,6 @@ class CfnProject(
 
         jsii.create(self.__class__, self, [scope, id, props])
 
-    @jsii.member(jsii_name="fromProjectArn")
-    @builtins.classmethod
-    def from_project_arn(
-        cls,
-        scope: _constructs_77d1e7e8.Construct,
-        id: builtins.str,
-        arn: builtins.str,
-    ) -> IProjectRef:
-        '''Creates a new IProjectRef from an ARN.
-
-        :param scope: -
-        :param id: -
-        :param arn: -
-        '''
-        if __debug__:
-            type_hints = typing.get_type_hints(_typecheckingstub__47ff058de186dbda01a49e6a1edc4d38fbfae207c99297e978eec7bfb197497d)
-            check_type(argname="argument scope", value=scope, expected_type=type_hints["scope"])
-            check_type(argname="argument id", value=id, expected_type=type_hints["id"])
-            check_type(argname="argument arn", value=arn, expected_type=type_hints["arn"])
-        return typing.cast(IProjectRef, jsii.sinvoke(cls, "fromProjectArn", [scope, id, arn]))
-
     @jsii.member(jsii_name="inspect")
     def inspect(self, inspector: _TreeInspector_488e0dd5) -> None:
         '''Examines the CloudFormation resource and discloses attributes.
@@ -2347,14 +2326,6 @@ def _typecheckingstub__14434bd621070d38889fc701fc289b3379981bee9c73fd7502773f1ee
     """Type checking stubs"""
     pass
 
-def _typecheckingstub__47ff058de186dbda01a49e6a1edc4d38fbfae207c99297e978eec7bfb197497d(
-    scope: _constructs_77d1e7e8.Construct,
-    id: builtins.str,
-    arn: builtins.str,
-) -> None:
-    """Type checking stubs"""
-    pass
-
 def _typecheckingstub__0172e641847a31da5e6877581313d2ece51b9650bcb74b1b80ba13e563323cc0(
     inspector: _TreeInspector_488e0dd5,
 ) -> None:
@@ -2553,3 +2524,6 @@ def _typecheckingstub__e523487c02bfde11953c715444eddb9f2ed729eec0aa81767c2868bf9
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [ICollectionRef, IProjectRef, IStreamProcessorRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_resiliencehub/__init__.py

@@ -2162,3 +2162,6 @@ def _typecheckingstub__1b31c880d8724506ba4025d50fede62d462b847c02406fe66ed0c1b34
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IAppRef, IResiliencyPolicyRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_resourceexplorer2/__init__.py

@@ -1454,3 +1454,6 @@ def _typecheckingstub__bd724c6b685500a7e2e21d499880a01c7a397039f097a6228c73a6e01
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IDefaultViewAssociationRef, IIndexRef, IViewRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_resourcegroups/__init__.py

@@ -1680,3 +1680,6 @@ def _typecheckingstub__66392dc23dc3e7ed8bf3c5d524bd90c2953712bb7e49a797537fda8d8
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IGroupRef, ITagSyncTaskRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_robomaker/__init__.py

@@ -3422,3 +3422,6 @@ def _typecheckingstub__b4436c869d1e97db1310a07c8709c1c39527703571128932c8cdb4b5b
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IFleetRef, IRobotApplicationRef, IRobotApplicationVersionRef, IRobotRef, ISimulationApplicationRef, ISimulationApplicationVersionRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_rolesanywhere/__init__.py

@@ -2460,3 +2460,6 @@ def _typecheckingstub__d423be7ff47fcc8761e7797ad37aac03811962bc633d561f5c9c8721d
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [ICRLRef, IProfileRef, ITrustAnchorRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_route53/__init__.py

@@ -1787,7 +1787,7 @@ class CfnRecordSetProps:
     ) -> None:
         '''Properties for defining a ``CfnRecordSet``.
 
-        :param name: For ``ChangeResourceRecordSets`` requests, the name of the record that you want to create, update, or delete. For ``ListResourceRecordSets`` responses, the name of a record in the specified hosted zone. *ChangeResourceRecordSets Only* Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical. For information about how to specify characters other than ``a-z`` , ``0-9`` , and ``-`` (hyphen) and how to specify internationalized domain names, see `DNS Domain Name Format <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html>`_ in the *Amazon Route 53 Developer Guide* . You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, ``*.example.com`` . Note the following: - The * must replace the entire label. For example, you can't specify ``*prod.example.com`` or ``prod*.example.com`` . - The * can't replace any of the middle labels, for example, marketing.*.example.com. - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard. .. epigraph:: You can't use the * wildcard for resource records sets that have a type of NS.
+        :param name: The name of the record that you want to create, update, or delete. Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical. For information about how to specify characters other than ``a-z`` , ``0-9`` , and ``-`` (hyphen) and how to specify internationalized domain names, see `DNS Domain Name Format <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html>`_ in the *Amazon Route 53 Developer Guide* . You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, ``*.example.com`` . Note the following: - The * must replace the entire label. For example, you can't specify ``*prod.example.com`` or ``prod*.example.com`` . - The * can't replace any of the middle labels, for example, marketing.*.example.com. - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard. .. epigraph:: You can't use the * wildcard for resource records sets that have a type of NS.
         :param type: The DNS record type. For information about different record types and how data is encoded for them, see `Supported DNS Resource Record Types <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html>`_ in the *Amazon Route 53 Developer Guide* . Valid values for basic resource record sets: ``A`` | ``AAAA`` | ``CAA`` | ``CNAME`` | ``DS`` | ``MX`` | ``NAPTR`` | ``NS`` | ``PTR`` | ``SOA`` | ``SPF`` | ``SRV`` | ``TXT`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` Values for weighted, latency, geolocation, and failover resource record sets: ``A`` | ``AAAA`` | ``CAA`` | ``CNAME`` | ``MX`` | ``NAPTR`` | ``PTR`` | ``SPF`` | ``SRV`` | ``TXT`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` . When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group. Valid values for multivalue answer resource record sets: ``A`` | ``AAAA`` | ``MX`` | ``NAPTR`` | ``PTR`` | ``SPF`` | ``SRV`` | ``TXT`` | ``CAA`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` .. epigraph:: SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of ``Type`` is ``SPF`` . RFC 7208, *Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1* , has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, `The SPF DNS Record Type <https://docs.aws.amazon.com/http://tools.ietf.org/html/rfc7208#section-14.1>`_ . Values for alias resource record sets: - *Amazon API Gateway custom regional APIs and edge-optimized APIs:* ``A`` - *CloudFront distributions:* ``A`` If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of ``A`` and one with a value of ``AAAA`` . - *Amazon API Gateway environment that has a regionalized subdomain* : ``A`` - *ELB load balancers:* ``A`` | ``AAAA`` - *Amazon S3 buckets:* ``A`` - *Amazon Virtual Private Cloud interface VPC endpoints* ``A`` - *Another resource record set in this hosted zone:* Specify the type of the resource record set that you're creating the alias for. All values are supported except ``NS`` and ``SOA`` . .. epigraph:: If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't route traffic to a record for which the value of ``Type`` is ``CNAME`` . This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
         :param alias_target: *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. If you're creating resource records sets for a private hosted zone, note the following: - You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution. - For information about creating failover resource record sets in a private hosted zone, see `Configuring Failover in a Private Hosted Zone <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html>`_ in the *Amazon Route 53 Developer Guide* .
         :param cidr_routing_config: The object that is specified in resource record set object when you are linking a resource record set to a CIDR location. A ``LocationName`` with an asterisk “*” can be used to create a default CIDR record. ``CollectionId`` is still required for default record.
@@ -1913,11 +1913,7 @@ class CfnRecordSetProps:
 
     @builtins.property
     def name(self) -> builtins.str:
-        '''For ``ChangeResourceRecordSets`` requests, the name of the record that you want to create, update, or delete.
-
-        For ``ListResourceRecordSets`` responses, the name of a record in the specified hosted zone.
-
-        *ChangeResourceRecordSets Only*
+        '''The name of the record that you want to create, update, or delete.
 
         Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical.
 
@@ -11163,16 +11159,16 @@ class CfnHealthCheck(
             :param alarm_identifier: A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether the specified health check is healthy.
             :param child_health_checks: (CALCULATED Health Checks Only) A complex type that contains one ``ChildHealthCheck`` element for each health check that you want to associate with a ``CALCULATED`` health check.
             :param enable_sni: Specify whether you want Amazon Route 53 to send the value of ``FullyQualifiedDomainName`` to the endpoint in the ``client_hello`` message during TLS negotiation. This allows the endpoint to respond to ``HTTPS`` health check requests with the applicable SSL/TLS certificate. Some endpoints require that ``HTTPS`` requests include the host name in the ``client_hello`` message. If you don't enable SNI, the status of the health check will be ``SSL alert handshake_failure`` . A health check can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid. The SSL/TLS certificate on your endpoint includes a domain name in the ``Common Name`` field and possibly several more in the ``Subject Alternative Names`` field. One of the domain names in the certificate should match the value that you specify for ``FullyQualifiedDomainName`` . If the endpoint responds to the ``client_hello`` message with a certificate that does not include the domain name that you specified in ``FullyQualifiedDomainName`` , a health checker will retry the handshake. In the second attempt, the health checker will omit ``FullyQualifiedDomainName`` from the ``client_hello`` message.
-            :param failure_threshold: The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see `How Amazon Route 53 Determines Whether an Endpoint Is Healthy <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html>`_ in the *Amazon Route 53 Developer Guide* . If you don't specify a value for ``FailureThreshold`` , the default value is three health checks.
+            :param failure_threshold: The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see `How Amazon Route 53 Determines Whether an Endpoint Is Healthy <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html>`_ in the *Amazon Route 53 Developer Guide* . ``FailureThreshold`` is not supported when you specify a value for ``Type`` of ``RECOVERY_CONTROL`` . Otherwise, if you don't specify a value for ``FailureThreshold`` , the default value is three health checks.
             :param fully_qualified_domain_name: Amazon Route 53 behavior depends on whether you specify a value for ``IPAddress`` . *If you specify a value for* ``IPAddress`` : Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of ``FullyQualifiedDomainName`` in the ``Host`` header for all health checks except TCP health checks. This is typically the fully qualified DNS name of the endpoint on which you want Route 53 to perform health checks. When Route 53 checks the health of an endpoint, here is how it constructs the ``Host`` header: - If you specify a value of ``80`` for ``Port`` and ``HTTP`` or ``HTTP_STR_MATCH`` for ``Type`` , Route 53 passes the value of ``FullyQualifiedDomainName`` to the endpoint in the Host header. - If you specify a value of ``443`` for ``Port`` and ``HTTPS`` or ``HTTPS_STR_MATCH`` for ``Type`` , Route 53 passes the value of ``FullyQualifiedDomainName`` to the endpoint in the ``Host`` header. - If you specify another value for ``Port`` and any value except ``TCP`` for ``Type`` , Route 53 passes ``FullyQualifiedDomainName:Port`` to the endpoint in the ``Host`` header. If you don't specify a value for ``FullyQualifiedDomainName`` , Route 53 substitutes the value of ``IPAddress`` in the ``Host`` header in each of the preceding cases. *If you don't specify a value for ``IPAddress``* : Route 53 sends a DNS request to the domain that you specify for ``FullyQualifiedDomainName`` at the interval that you specify for ``RequestInterval`` . Using an IPv4 address that DNS returns, Route 53 then checks the health of the endpoint. .. epigraph:: If you don't specify a value for ``IPAddress`` , Route 53 uses only IPv4 to send health checks to the endpoint. If there's no record with a type of A for the name that you specify for ``FullyQualifiedDomainName`` , the health check fails with a "DNS resolution failed" error. If you want to check the health of multiple records that have the same name and type, such as multiple weighted records, and if you choose to specify the endpoint only by ``FullyQualifiedDomainName`` , we recommend that you create a separate health check for each endpoint. For example, create a health check for each HTTP server that is serving content for www.example.com. For the value of ``FullyQualifiedDomainName`` , specify the domain name of the server (such as us-east-2-www.example.com), not the name of the records (www.example.com). .. epigraph:: In this configuration, if you create a health check for which the value of ``FullyQualifiedDomainName`` matches the name of the records and you then associate the health check with those records, health check results will be unpredictable. In addition, if the value that you specify for ``Type`` is ``HTTP`` , ``HTTPS`` , ``HTTP_STR_MATCH`` , or ``HTTPS_STR_MATCH`` , Route 53 passes the value of ``FullyQualifiedDomainName`` in the ``Host`` header, as it does when you specify a value for ``IPAddress`` . If the value of ``Type`` is ``TCP`` , Route 53 doesn't pass a ``Host`` header.
             :param health_threshold: The number of child health checks that are associated with a ``CALCULATED`` health check that Amazon Route 53 must consider healthy for the ``CALCULATED`` health check to be considered healthy. To specify the child health checks that you want to associate with a ``CALCULATED`` health check, use the `ChildHealthChecks <https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-ChildHealthChecks>`_ element. Note the following: - If you specify a number greater than the number of child health checks, Route 53 always considers this health check to be unhealthy. - If you specify ``0`` , Route 53 always considers this health check to be healthy.
             :param insufficient_data_health_status: When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want Amazon Route 53 to assign to the health check: - ``Healthy`` : Route 53 considers the health check to be healthy. - ``Unhealthy`` : Route 53 considers the health check to be unhealthy. - ``LastKnownStatus`` : Route 53 uses the status of the health check from the last time that CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known status, the default status for the health check is healthy.
             :param inverted: Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a health check unhealthy when it otherwise would be considered healthy.
             :param ip_address: The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53 to perform health checks on. If you don't specify a value for ``IPAddress`` , Route 53 sends a DNS request to resolve the domain name that you specify in ``FullyQualifiedDomainName`` at the interval that you specify in ``RequestInterval`` . Using an IP address returned by DNS, Route 53 then checks the health of the endpoint. Use one of the following formats for the value of ``IPAddress`` : - *IPv4 address* : four values between 0 and 255, separated by periods (.), for example, ``192.0.2.44`` . - *IPv6 address* : eight groups of four hexadecimal values, separated by colons (:), for example, ``2001:0db8:85a3:0000:0000:abcd:0001:2345`` . You can also shorten IPv6 addresses as described in RFC 5952, for example, ``2001:db8:85a3::abcd:1:2345`` . If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your EC2 instance, and specify the Elastic IP address for ``IPAddress`` . This ensures that the IP address of your instance will never change. For more information, see `FullyQualifiedDomainName <https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName>`_ . Constraints: Route 53 can't check the health of endpoints for which the IP address is in local, private, non-routable, or multicast ranges. For more information about IP addresses for which you can't create health checks, see the following documents: - `RFC 5735, Special Use IPv4 Addresses <https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5735>`_ - `RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space <https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc6598>`_ - `RFC 5156, Special-Use IPv6 Addresses <https://docs.aws.amazon.com/https://tools.ietf.org/html/rfc5156>`_ When the value of ``Type`` is ``CALCULATED`` or ``CLOUDWATCH_METRIC`` , omit ``IPAddress`` .
-            :param measure_latency: Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the *Health Checks* page in the Route 53 console. .. epigraph:: You can't change the value of ``MeasureLatency`` after you create a health check.
+            :param measure_latency: Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the *Health Checks* page in the Route 53 console. ``MeasureLatency`` is not supported when you specify a value for ``Type`` of ``RECOVERY_CONTROL`` . .. epigraph:: You can't change the value of ``MeasureLatency`` after you create a health check.
             :param port: The port on the endpoint that you want Amazon Route 53 to perform health checks on. .. epigraph:: Don't specify a value for ``Port`` when you specify a value for `Type <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-type>`_ of ``CLOUDWATCH_METRIC`` or ``CALCULATED`` .
             :param regions: A complex type that contains one ``Region`` element for each region from which you want Amazon Route 53 health checkers to check the specified endpoint. If you don't specify any regions, Route 53 health checkers automatically performs checks from all of the regions that are listed under *Valid Values* . If you update a health check to remove a region that has been performing health checks, Route 53 will briefly continue to perform checks from that region to ensure that some health checkers are always checking the endpoint (for example, if you replace three regions with four different regions).
-            :param request_interval: The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request. Each Route 53 health checker makes requests at this interval. .. epigraph:: You can't change the value of ``RequestInterval`` after you create a health check. If you don't specify a value for ``RequestInterval`` , the default value is ``30`` seconds.
+            :param request_interval: The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request. Each Route 53 health checker makes requests at this interval. ``RequestInterval`` is not supported when you specify a value for ``Type`` of ``RECOVERY_CONTROL`` . .. epigraph:: You can't change the value of ``RequestInterval`` after you create a health check. If you don't specify a value for ``RequestInterval`` , the default value is ``30`` seconds.
             :param resource_path: The path, if any, that you want Amazon Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example, the file /docs/route53-health-check.html. You can also include query string parameters, for example, ``/welcome.html?language=jp&login=y`` .
             :param routing_control_arn: The Amazon Resource Name (ARN) for the Route 53 Application Recovery Controller routing control. For more information about Route 53 Application Recovery Controller, see `Route 53 Application Recovery Controller Developer Guide. <https://docs.aws.amazon.com/r53recovery/latest/dg/what-is-route-53-recovery.html>`_ .
             :param search_string: If the value of Type is ``HTTP_STR_MATCH`` or ``HTTPS_STR_MATCH`` , the string that you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in the response body, Route 53 considers the resource healthy. Route 53 considers case when searching for ``SearchString`` in the response body.
@@ -11349,7 +11345,9 @@ class CfnHealthCheck(
 
             For more information, see `How Amazon Route 53 Determines Whether an Endpoint Is Healthy <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html>`_ in the *Amazon Route 53 Developer Guide* .
 
-            If you don't specify a value for ``FailureThreshold`` , the default value is three health checks.
+            ``FailureThreshold`` is not supported when you specify a value for ``Type`` of ``RECOVERY_CONTROL`` .
+
+            Otherwise, if you don't specify a value for ``FailureThreshold`` , the default value is three health checks.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53-healthcheck-healthcheckconfig.html#cfn-route53-healthcheck-healthcheckconfig-failurethreshold
             '''
@@ -11464,6 +11462,7 @@ class CfnHealthCheck(
         ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
             '''Specify whether you want Amazon Route 53 to measure the latency between health checkers in multiple AWS regions and your endpoint, and to display CloudWatch latency graphs on the *Health Checks* page in the Route 53 console.
 
+            ``MeasureLatency`` is not supported when you specify a value for ``Type`` of ``RECOVERY_CONTROL`` .
             .. epigraph::
 
                You can't change the value of ``MeasureLatency`` after you create a health check.
@@ -11504,6 +11503,8 @@ class CfnHealthCheck(
             '''The number of seconds between the time that Amazon Route 53 gets a response from your endpoint and the time that it sends the next health check request.
 
             Each Route 53 health checker makes requests at this interval.
+
+            ``RequestInterval`` is not supported when you specify a value for ``Type`` of ``RECOVERY_CONTROL`` .
             .. epigraph::
 
                You can't change the value of ``RequestInterval`` after you create a health check.
@@ -12390,7 +12391,7 @@ class CfnRecordSet(
         '''
         :param scope: Scope in which this resource is defined.
         :param id: Construct identifier for this resource (unique in its scope).
-        :param name: For ``ChangeResourceRecordSets`` requests, the name of the record that you want to create, update, or delete. For ``ListResourceRecordSets`` responses, the name of a record in the specified hosted zone. *ChangeResourceRecordSets Only* Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical. For information about how to specify characters other than ``a-z`` , ``0-9`` , and ``-`` (hyphen) and how to specify internationalized domain names, see `DNS Domain Name Format <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html>`_ in the *Amazon Route 53 Developer Guide* . You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, ``*.example.com`` . Note the following: - The * must replace the entire label. For example, you can't specify ``*prod.example.com`` or ``prod*.example.com`` . - The * can't replace any of the middle labels, for example, marketing.*.example.com. - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard. .. epigraph:: You can't use the * wildcard for resource records sets that have a type of NS.
+        :param name: The name of the record that you want to create, update, or delete. Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical. For information about how to specify characters other than ``a-z`` , ``0-9`` , and ``-`` (hyphen) and how to specify internationalized domain names, see `DNS Domain Name Format <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html>`_ in the *Amazon Route 53 Developer Guide* . You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, ``*.example.com`` . Note the following: - The * must replace the entire label. For example, you can't specify ``*prod.example.com`` or ``prod*.example.com`` . - The * can't replace any of the middle labels, for example, marketing.*.example.com. - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard. .. epigraph:: You can't use the * wildcard for resource records sets that have a type of NS.
         :param type: The DNS record type. For information about different record types and how data is encoded for them, see `Supported DNS Resource Record Types <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html>`_ in the *Amazon Route 53 Developer Guide* . Valid values for basic resource record sets: ``A`` | ``AAAA`` | ``CAA`` | ``CNAME`` | ``DS`` | ``MX`` | ``NAPTR`` | ``NS`` | ``PTR`` | ``SOA`` | ``SPF`` | ``SRV`` | ``TXT`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` Values for weighted, latency, geolocation, and failover resource record sets: ``A`` | ``AAAA`` | ``CAA`` | ``CNAME`` | ``MX`` | ``NAPTR`` | ``PTR`` | ``SPF`` | ``SRV`` | ``TXT`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` . When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group. Valid values for multivalue answer resource record sets: ``A`` | ``AAAA`` | ``MX`` | ``NAPTR`` | ``PTR`` | ``SPF`` | ``SRV`` | ``TXT`` | ``CAA`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` .. epigraph:: SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of ``Type`` is ``SPF`` . RFC 7208, *Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1* , has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, `The SPF DNS Record Type <https://docs.aws.amazon.com/http://tools.ietf.org/html/rfc7208#section-14.1>`_ . Values for alias resource record sets: - *Amazon API Gateway custom regional APIs and edge-optimized APIs:* ``A`` - *CloudFront distributions:* ``A`` If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of ``A`` and one with a value of ``AAAA`` . - *Amazon API Gateway environment that has a regionalized subdomain* : ``A`` - *ELB load balancers:* ``A`` | ``AAAA`` - *Amazon S3 buckets:* ``A`` - *Amazon Virtual Private Cloud interface VPC endpoints* ``A`` - *Another resource record set in this hosted zone:* Specify the type of the resource record set that you're creating the alias for. All values are supported except ``NS`` and ``SOA`` . .. epigraph:: If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't route traffic to a record for which the value of ``Type`` is ``CNAME`` . This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
         :param alias_target: *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. If you're creating resource records sets for a private hosted zone, note the following: - You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution. - For information about creating failover resource record sets in a private hosted zone, see `Configuring Failover in a Private Hosted Zone <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html>`_ in the *Amazon Route 53 Developer Guide* .
         :param cidr_routing_config: The object that is specified in resource record set object when you are linking a resource record set to a CIDR location. A ``LocationName`` with an asterisk “*” can be used to create a default CIDR record. ``CollectionId`` is still required for default record.
@@ -12487,7 +12488,7 @@ class CfnRecordSet(
     @builtins.property
     @jsii.member(jsii_name="name")
     def name(self) -> builtins.str:
-        '''For ``ChangeResourceRecordSets`` requests, the name of the record that you want to create, update, or delete.'''
+        '''The name of the record that you want to create, update, or delete.'''
         return typing.cast(builtins.str, jsii.get(self, "name"))
 
     @name.setter
@@ -14138,7 +14139,7 @@ class CfnRecordSetGroup(
         ) -> None:
             '''Information about one record that you want to create.
 
-            :param name: For ``ChangeResourceRecordSets`` requests, the name of the record that you want to create, update, or delete. For ``ListResourceRecordSets`` responses, the name of a record in the specified hosted zone. *ChangeResourceRecordSets Only* Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical. For information about how to specify characters other than ``a-z`` , ``0-9`` , and ``-`` (hyphen) and how to specify internationalized domain names, see `DNS Domain Name Format <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html>`_ in the *Amazon Route 53 Developer Guide* . You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, ``*.example.com`` . Note the following: - The * must replace the entire label. For example, you can't specify ``*prod.example.com`` or ``prod*.example.com`` . - The * can't replace any of the middle labels, for example, marketing.*.example.com. - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard. .. epigraph:: You can't use the * wildcard for resource records sets that have a type of NS.
+            :param name: The name of the record that you want to create, update, or delete. Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical. For information about how to specify characters other than ``a-z`` , ``0-9`` , and ``-`` (hyphen) and how to specify internationalized domain names, see `DNS Domain Name Format <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html>`_ in the *Amazon Route 53 Developer Guide* . You can use the asterisk (*) wildcard to replace the leftmost label in a domain name, for example, ``*.example.com`` . Note the following: - The * must replace the entire label. For example, you can't specify ``*prod.example.com`` or ``prod*.example.com`` . - The * can't replace any of the middle labels, for example, marketing.*.example.com. - If you include * in any position other than the leftmost label in a domain name, DNS treats it as an * character (ASCII 42), not as a wildcard. .. epigraph:: You can't use the * wildcard for resource records sets that have a type of NS.
             :param type: The DNS record type. For information about different record types and how data is encoded for them, see `Supported DNS Resource Record Types <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html>`_ in the *Amazon Route 53 Developer Guide* . Valid values for basic resource record sets: ``A`` | ``AAAA`` | ``CAA`` | ``CNAME`` | ``DS`` | ``MX`` | ``NAPTR`` | ``NS`` | ``PTR`` | ``SOA`` | ``SPF`` | ``SRV`` | ``TXT`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` Values for weighted, latency, geolocation, and failover resource record sets: ``A`` | ``AAAA`` | ``CAA`` | ``CNAME`` | ``MX`` | ``NAPTR`` | ``PTR`` | ``SPF`` | ``SRV`` | ``TXT`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` . When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group. Valid values for multivalue answer resource record sets: ``A`` | ``AAAA`` | ``MX`` | ``NAPTR`` | ``PTR`` | ``SPF`` | ``SRV`` | ``TXT`` | ``CAA`` | ``TLSA`` | ``SSHFP`` | ``SVCB`` | ``HTTPS`` .. epigraph:: SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of ``Type`` is ``SPF`` . RFC 7208, *Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1* , has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, `The SPF DNS Record Type <https://docs.aws.amazon.com/http://tools.ietf.org/html/rfc7208#section-14.1>`_ . Values for alias resource record sets: - *Amazon API Gateway custom regional APIs and edge-optimized APIs:* ``A`` - *CloudFront distributions:* ``A`` If IPv6 is enabled for the distribution, create two resource record sets to route traffic to your distribution, one with a value of ``A`` and one with a value of ``AAAA`` . - *Amazon API Gateway environment that has a regionalized subdomain* : ``A`` - *ELB load balancers:* ``A`` | ``AAAA`` - *Amazon S3 buckets:* ``A`` - *Amazon Virtual Private Cloud interface VPC endpoints* ``A`` - *Another resource record set in this hosted zone:* Specify the type of the resource record set that you're creating the alias for. All values are supported except ``NS`` and ``SOA`` . .. epigraph:: If you're creating an alias record that has the same name as the hosted zone (known as the zone apex), you can't route traffic to a record for which the value of ``Type`` is ``CNAME`` . This is because the alias record must have the same type as the record you're routing traffic to, and creating a CNAME record for the zone apex isn't supported even for an alias record.
             :param alias_target: *Alias resource record sets only:* Information about the AWS resource, such as a CloudFront distribution or an Amazon S3 bucket, that you want to route traffic to. If you're creating resource records sets for a private hosted zone, note the following: - You can't create an alias resource record set in a private hosted zone to route traffic to a CloudFront distribution. - For information about creating failover resource record sets in a private hosted zone, see `Configuring Failover in a Private Hosted Zone <https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html>`_ in the *Amazon Route 53 Developer Guide* .
             :param cidr_routing_config: 
@@ -14259,11 +14260,7 @@ class CfnRecordSetGroup(
 
         @builtins.property
         def name(self) -> builtins.str:
-            '''For ``ChangeResourceRecordSets`` requests, the name of the record that you want to create, update, or delete.
-
-            For ``ListResourceRecordSets`` responses, the name of a record in the specified hosted zone.
-
-            *ChangeResourceRecordSets Only*
+            '''The name of the record that you want to create, update, or delete.
 
             Enter a fully qualified domain name, for example, ``www.example.com`` . You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 assumes that the domain name that you specify is fully qualified. This means that Route 53 treats ``www.example.com`` (without a trailing dot) and ``www.example.com.`` (with a trailing dot) as identical.
 
@@ -19510,3 +19507,6 @@ def _typecheckingstub__f189380057459afbeff6d38749625e3756c4572dec90f74ca7a400dcb
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IAliasRecordTarget, ICidrCollectionRef, IDNSSECRef, IHealthCheck, IHealthCheckRef, IHostedZone, IHostedZoneRef, IKeySigningKey, IKeySigningKeyRef, IPrivateHostedZone, IPublicHostedZone, IRecordSet, IRecordSetGroupRef, IRecordSetRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_route53_targets/__init__.py

@@ -1340,3 +1340,6 @@ def _typecheckingstub__570d79c602907c31355fd27286b9195e6a4ac50d33a57b857248da0d9
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IAliasRecordTargetProps]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_route53profiles/__init__.py

@@ -1395,3 +1395,6 @@ def _typecheckingstub__ef034a5fa94b59c1205f90a0df217e7fe4b64926828487662c4de8f77
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IProfileAssociationRef, IProfileRef, IProfileResourceAssociationRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_route53recoverycontrol/__init__.py

@@ -2296,3 +2296,6 @@ def _typecheckingstub__6e9c7596694f51a191b407b4cf7800cd696d05a6cbbcb4f0a2890c69a
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IClusterRef, IControlPanelRef, IRoutingControlRef, ISafetyRuleRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_route53recoveryreadiness/__init__.py

@@ -2414,3 +2414,6 @@ def _typecheckingstub__16ba16f97722031f82a55ec2c9c68e5635ae95c709411fdf3cc1a4962
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [ICellRef, IReadinessCheckRef, IRecoveryGroupRef, IResourceSetRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_route53resolver/__init__.py

@@ -1114,7 +1114,7 @@ class CfnResolverRuleAssociationProps:
 
         :param resolver_rule_id: The ID of the Resolver rule that you associated with the VPC that is specified by ``VPCId`` .
         :param vpc_id: The ID of the VPC that you associated the Resolver rule with.
-        :param name: The name of an association between a Resolver rule and a VPC.
+        :param name: The name of an association between a Resolver rule and a VPC. The name can be up to 64 characters long and can contain letters (a-z, A-Z), numbers (0-9), hyphens (-), underscores (_), and spaces. The name cannot consist of only numbers.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverruleassociation.html
         :exampleMetadata: fixture=_generated
@@ -1169,6 +1169,8 @@ class CfnResolverRuleAssociationProps:
     def name(self) -> typing.Optional[builtins.str]:
         '''The name of an association between a Resolver rule and a VPC.
 
+        The name can be up to 64 characters long and can contain letters (a-z, A-Z), numbers (0-9), hyphens (-), underscores (_), and spaces. The name cannot consist of only numbers.
+
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverruleassociation.html#cfn-route53resolver-resolverruleassociation-name
         '''
         result = self._values.get("name")
@@ -1216,7 +1218,7 @@ class CfnResolverRuleProps:
         :param rule_type: When you want to forward DNS queries for specified domain name to resolvers on your network, specify ``FORWARD`` or ``DELEGATE`` . If a query matches multiple Resolver rules (example.com and www.example.com), outbound DNS queries are routed using the Resolver rule that contains the most specific domain name (www.example.com). When you have a forwarding rule to forward DNS queries for a domain to your network and you want Resolver to process queries for a subdomain of that domain, specify ``SYSTEM`` . For example, to forward DNS queries for example.com to resolvers on your network, you create a rule and specify ``FORWARD`` for ``RuleType`` . To then have Resolver process queries for apex.example.com, you create a rule and specify ``SYSTEM`` for ``RuleType`` . Currently, only Resolver can create rules that have a value of ``RECURSIVE`` for ``RuleType`` .
         :param delegation_record: DNS queries with delegation records that point to this domain name are forwarded to resolvers on your network.
         :param domain_name: DNS queries for this domain name are forwarded to the IP addresses that are specified in ``TargetIps`` . If a query matches multiple Resolver rules (example.com and www.example.com), the query is routed using the Resolver rule that contains the most specific domain name (www.example.com).
-        :param name: The name for the Resolver rule, which you specified when you created the Resolver rule.
+        :param name: The name for the Resolver rule, which you specified when you created the Resolver rule. The name can be up to 64 characters long and can contain letters (a-z, A-Z), numbers (0-9), hyphens (-), underscores (_), and spaces. The name cannot consist of only numbers.
         :param resolver_endpoint_id: The ID of the endpoint that the rule is associated with.
         :param tags: Tags help organize and categorize your Resolver rules. Each tag consists of a key and an optional value, both of which you define.
         :param target_ips: An array that contains the IP addresses and ports that an outbound endpoint forwards DNS queries to. Typically, these are the IP addresses of DNS resolvers on your network.
@@ -1318,6 +1320,8 @@ class CfnResolverRuleProps:
     def name(self) -> typing.Optional[builtins.str]:
         '''The name for the Resolver rule, which you specified when you created the Resolver rule.
 
+        The name can be up to 64 characters long and can contain letters (a-z, A-Z), numbers (0-9), hyphens (-), underscores (_), and spaces. The name cannot consist of only numbers.
+
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-name
         '''
         result = self._values.get("name")
@@ -5033,7 +5037,7 @@ class CfnResolverRule(
         :param rule_type: When you want to forward DNS queries for specified domain name to resolvers on your network, specify ``FORWARD`` or ``DELEGATE`` . If a query matches multiple Resolver rules (example.com and www.example.com), outbound DNS queries are routed using the Resolver rule that contains the most specific domain name (www.example.com). When you have a forwarding rule to forward DNS queries for a domain to your network and you want Resolver to process queries for a subdomain of that domain, specify ``SYSTEM`` . For example, to forward DNS queries for example.com to resolvers on your network, you create a rule and specify ``FORWARD`` for ``RuleType`` . To then have Resolver process queries for apex.example.com, you create a rule and specify ``SYSTEM`` for ``RuleType`` . Currently, only Resolver can create rules that have a value of ``RECURSIVE`` for ``RuleType`` .
         :param delegation_record: DNS queries with delegation records that point to this domain name are forwarded to resolvers on your network.
         :param domain_name: DNS queries for this domain name are forwarded to the IP addresses that are specified in ``TargetIps`` . If a query matches multiple Resolver rules (example.com and www.example.com), the query is routed using the Resolver rule that contains the most specific domain name (www.example.com).
-        :param name: The name for the Resolver rule, which you specified when you created the Resolver rule.
+        :param name: The name for the Resolver rule, which you specified when you created the Resolver rule. The name can be up to 64 characters long and can contain letters (a-z, A-Z), numbers (0-9), hyphens (-), underscores (_), and spaces. The name cannot consist of only numbers.
         :param resolver_endpoint_id: The ID of the endpoint that the rule is associated with.
         :param tags: Tags help organize and categorize your Resolver rules. Each tag consists of a key and an optional value, both of which you define.
         :param target_ips: An array that contains the IP addresses and ports that an outbound endpoint forwards DNS queries to. Typically, these are the IP addresses of DNS resolvers on your network.
@@ -5426,7 +5430,7 @@ class CfnResolverRuleAssociation(
         :param id: Construct identifier for this resource (unique in its scope).
         :param resolver_rule_id: The ID of the Resolver rule that you associated with the VPC that is specified by ``VPCId`` .
         :param vpc_id: The ID of the VPC that you associated the Resolver rule with.
-        :param name: The name of an association between a Resolver rule and a VPC.
+        :param name: The name of an association between a Resolver rule and a VPC. The name can be up to 64 characters long and can contain letters (a-z, A-Z), numbers (0-9), hyphens (-), underscores (_), and spaces. The name cannot consist of only numbers.
         '''
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__8e372f7e2d960601c8b6496b7cbefaf56be2402644532349feb6b1a788f12a6f)
@@ -6379,3 +6383,6 @@ def _typecheckingstub__dbb22cd6829772b1f3226c329a7cb57daf6b212b33815f8279e8d6430
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IFirewallDomainListRef, IFirewallRuleGroupAssociationRef, IFirewallRuleGroupRef, IOutpostResolverRef, IResolverConfigRef, IResolverDNSSECConfigRef, IResolverEndpointRef, IResolverQueryLoggingConfigAssociationRef, IResolverQueryLoggingConfigRef, IResolverRuleAssociationRef, IResolverRuleRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])

aws_cdk/aws_rum/__init__.py

@@ -1766,3 +1766,6 @@ def _typecheckingstub__50574a83877817c5c30ff641cfa13fc211766060d3c8591b640545f55
 ) -> None:
     """Type checking stubs"""
     pass
+
+for cls in [IAppMonitorRef]:
+    typing.cast(typing.Any, cls).__protocol_attrs__ = typing.cast(typing.Any, cls).__protocol_attrs__ - set(['__jsii_proxy_class__', '__jsii_type__'])