aws-cdk-lib 2.211.0__py3-none-any.whl → 2.213.0__py3-none-any.whl

aws_cdk/aws_elasticloadbalancingv2/__init__.py

@@ -8863,7 +8863,7 @@ class CfnLoadBalancer(
         ) -> None:
             '''Specifies an attribute for an Application Load Balancer, a Network Load Balancer, or a Gateway Load Balancer.
 
-            :param key: The name of the attribute. The following attributes are supported by all load balancers: - ``deletion_protection.enabled`` - Indicates whether deletion protection is enabled. The value is ``true`` or ``false`` . The default is ``false`` . - ``load_balancing.cross_zone.enabled`` - Indicates whether cross-zone load balancing is enabled. The possible values are ``true`` and ``false`` . The default for Network Load Balancers and Gateway Load Balancers is ``false`` . The default for Application Load Balancers is ``true`` , and can't be changed. The following attributes are supported by both Application Load Balancers and Network Load Balancers: - ``access_logs.s3.enabled`` - Indicates whether access logs are enabled. The value is ``true`` or ``false`` . The default is ``false`` . - ``access_logs.s3.bucket`` - The name of the S3 bucket for the access logs. This attribute is required if access logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket. - ``access_logs.s3.prefix`` - The prefix for the location in the S3 bucket for the access logs. - ``ipv6.deny_all_igw_traffic`` - Blocks internet gateway (IGW) access to the load balancer. It is set to ``false`` for internet-facing load balancers and ``true`` for internal load balancers, preventing unintended access to your internal load balancer through an internet gateway. - ``zonal_shift.config.enabled`` - Indicates whether zonal shift is enabled. The possible values are ``true`` and ``false`` . The default is ``false`` . The following attributes are supported by only Application Load Balancers: - ``idle_timeout.timeout_seconds`` - The idle timeout value, in seconds. The valid range is 1-4000 seconds. The default is 60 seconds. - ``client_keep_alive.seconds`` - The client keep alive value, in seconds. The valid range is 60-604800 seconds. The default is 3600 seconds. - ``connection_logs.s3.enabled`` - Indicates whether connection logs are enabled. The value is ``true`` or ``false`` . The default is ``false`` . - ``connection_logs.s3.bucket`` - The name of the S3 bucket for the connection logs. This attribute is required if connection logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket. - ``connection_logs.s3.prefix`` - The prefix for the location in the S3 bucket for the connection logs. - ``routing.http.desync_mitigation_mode`` - Determines how the load balancer handles requests that might pose a security risk to your application. The possible values are ``monitor`` , ``defensive`` , and ``strictest`` . The default is ``defensive`` . - ``routing.http.drop_invalid_header_fields.enabled`` - Indicates whether HTTP headers with invalid header fields are removed by the load balancer ( ``true`` ) or routed to targets ( ``false`` ). The default is ``false`` . - ``routing.http.preserve_host_header.enabled`` - Indicates whether the Application Load Balancer should preserve the ``Host`` header in the HTTP request and send it to the target without any change. The possible values are ``true`` and ``false`` . The default is ``false`` . - ``routing.http.x_amzn_tls_version_and_cipher_suite.enabled`` - Indicates whether the two headers ( ``x-amzn-tls-version`` and ``x-amzn-tls-cipher-suite`` ), which contain information about the negotiated TLS version and cipher suite, are added to the client request before sending it to the target. The ``x-amzn-tls-version`` header has information about the TLS protocol version negotiated with the client, and the ``x-amzn-tls-cipher-suite`` header has information about the cipher suite negotiated with the client. Both headers are in OpenSSL format. The possible values for the attribute are ``true`` and ``false`` . The default is ``false`` . - ``routing.http.xff_client_port.enabled`` - Indicates whether the ``X-Forwarded-For`` header should preserve the source port that the client used to connect to the load balancer. The possible values are ``true`` and ``false`` . The default is ``false`` . - ``routing.http.xff_header_processing.mode`` - Enables you to modify, preserve, or remove the ``X-Forwarded-For`` header in the HTTP request before the Application Load Balancer sends the request to the target. The possible values are ``append`` , ``preserve`` , and ``remove`` . The default is ``append`` . - If the value is ``append`` , the Application Load Balancer adds the client IP address (of the last hop) to the ``X-Forwarded-For`` header in the HTTP request before it sends it to targets. - If the value is ``preserve`` the Application Load Balancer preserves the ``X-Forwarded-For`` header in the HTTP request, and sends it to targets without any change. - If the value is ``remove`` , the Application Load Balancer removes the ``X-Forwarded-For`` header in the HTTP request before it sends it to targets. - ``routing.http2.enabled`` - Indicates whether HTTP/2 is enabled. The possible values are ``true`` and ``false`` . The default is ``true`` . Elastic Load Balancing requires that message header names contain only alphanumeric characters and hyphens. - ``waf.fail_open.enabled`` - Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to AWS WAF. The possible values are ``true`` and ``false`` . The default is ``false`` . The following attributes are supported by only Network Load Balancers: - ``dns_record.client_routing_policy`` - Indicates how traffic is distributed among the load balancer Availability Zones. The possible values are ``availability_zone_affinity`` with 100 percent zonal affinity, ``partial_availability_zone_affinity`` with 85 percent zonal affinity, and ``any_availability_zone`` with 0 percent zonal affinity. - ``secondary_ips.auto_assigned.per_subnet`` - The number of secondary IP addresses to configure for your load balancer nodes. Use to address port allocation errors if you can't add targets. The valid range is 0 to 7. The default is 0. After you set this value, you can't decrease it.
+            :param key: The name of the attribute. The following attributes are supported by all load balancers: - ``deletion_protection.enabled`` - Indicates whether deletion protection is enabled. The value is ``true`` or ``false`` . The default is ``false`` . - ``load_balancing.cross_zone.enabled`` - Indicates whether cross-zone load balancing is enabled. The possible values are ``true`` and ``false`` . The default for Network Load Balancers and Gateway Load Balancers is ``false`` . The default for Application Load Balancers is ``true`` , and can't be changed. The following attributes are supported by both Application Load Balancers and Network Load Balancers: - ``access_logs.s3.enabled`` - Indicates whether access logs are enabled. The value is ``true`` or ``false`` . The default is ``false`` . - ``access_logs.s3.bucket`` - The name of the S3 bucket for the access logs. This attribute is required if access logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket. - ``access_logs.s3.prefix`` - The prefix for the location in the S3 bucket for the access logs. - ``ipv6.deny_all_igw_traffic`` - Blocks internet gateway (IGW) access to the load balancer. It is set to ``false`` for internet-facing load balancers and ``true`` for internal load balancers, preventing unintended access to your internal load balancer through an internet gateway. - ``zonal_shift.config.enabled`` - Indicates whether zonal shift is enabled. The possible values are ``true`` and ``false`` . The default is ``false`` . The following attributes are supported by only Application Load Balancers: - ``idle_timeout.timeout_seconds`` - The idle timeout value, in seconds. The valid range is 1-4000 seconds. The default is 60 seconds. - ``client_keep_alive.seconds`` - The client keep alive value, in seconds. The valid range is 60-604800 seconds. The default is 3600 seconds. - ``connection_logs.s3.enabled`` - Indicates whether connection logs are enabled. The value is ``true`` or ``false`` . The default is ``false`` . - ``connection_logs.s3.bucket`` - The name of the S3 bucket for the connection logs. This attribute is required if connection logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket. - ``connection_logs.s3.prefix`` - The prefix for the location in the S3 bucket for the connection logs. - ``routing.http.desync_mitigation_mode`` - Determines how the load balancer handles requests that might pose a security risk to your application. The possible values are ``monitor`` , ``defensive`` , and ``strictest`` . The default is ``defensive`` . - ``routing.http.drop_invalid_header_fields.enabled`` - Indicates whether HTTP headers with invalid header fields are removed by the load balancer ( ``true`` ) or routed to targets ( ``false`` ). The default is ``false`` . - ``routing.http.preserve_host_header.enabled`` - Indicates whether the Application Load Balancer should preserve the ``Host`` header in the HTTP request and send it to the target without any change. The possible values are ``true`` and ``false`` . The default is ``false`` . - ``routing.http.x_amzn_tls_version_and_cipher_suite.enabled`` - Indicates whether the two headers ( ``x-amzn-tls-version`` and ``x-amzn-tls-cipher-suite`` ), which contain information about the negotiated TLS version and cipher suite, are added to the client request before sending it to the target. The ``x-amzn-tls-version`` header has information about the TLS protocol version negotiated with the client, and the ``x-amzn-tls-cipher-suite`` header has information about the cipher suite negotiated with the client. Both headers are in OpenSSL format. The possible values for the attribute are ``true`` and ``false`` . The default is ``false`` . - ``routing.http.xff_client_port.enabled`` - Indicates whether the ``X-Forwarded-For`` header should preserve the source port that the client used to connect to the load balancer. The possible values are ``true`` and ``false`` . The default is ``false`` . - ``routing.http.xff_header_processing.mode`` - Enables you to modify, preserve, or remove the ``X-Forwarded-For`` header in the HTTP request before the Application Load Balancer sends the request to the target. The possible values are ``append`` , ``preserve`` , and ``remove`` . The default is ``append`` . - If the value is ``append`` , the Application Load Balancer adds the client IP address (of the last hop) to the ``X-Forwarded-For`` header in the HTTP request before it sends it to targets. - If the value is ``preserve`` the Application Load Balancer preserves the ``X-Forwarded-For`` header in the HTTP request, and sends it to targets without any change. - If the value is ``remove`` , the Application Load Balancer removes the ``X-Forwarded-For`` header in the HTTP request before it sends it to targets. - ``routing.http2.enabled`` - Indicates whether clients can connect to the load balancer using HTTP/2. If ``true`` , clients can connect using HTTP/2 or HTTP/1.1. However, all client requests are subject to the stricter HTTP/2 header validation rules. For example, message header names must contain only alphanumeric characters and hyphens. If ``false`` , clients must connect using HTTP/1.1. The default is ``true`` . - ``waf.fail_open.enabled`` - Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to AWS WAF. The possible values are ``true`` and ``false`` . The default is ``false`` . The following attributes are supported by only Network Load Balancers: - ``dns_record.client_routing_policy`` - Indicates how traffic is distributed among the load balancer Availability Zones. The possible values are ``availability_zone_affinity`` with 100 percent zonal affinity, ``partial_availability_zone_affinity`` with 85 percent zonal affinity, and ``any_availability_zone`` with 0 percent zonal affinity. - ``secondary_ips.auto_assigned.per_subnet`` - The number of secondary IP addresses to configure for your load balancer nodes. Use to address port allocation errors if you can't add targets. The valid range is 0 to 7. The default is 0. After you set this value, you can't decrease it.
             :param value: The value of the attribute.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticloadbalancingv2-loadbalancer-loadbalancerattribute.html
@@ -8923,7 +8923,7 @@ class CfnLoadBalancer(
             - If the value is ``append`` , the Application Load Balancer adds the client IP address (of the last hop) to the ``X-Forwarded-For`` header in the HTTP request before it sends it to targets.
             - If the value is ``preserve`` the Application Load Balancer preserves the ``X-Forwarded-For`` header in the HTTP request, and sends it to targets without any change.
             - If the value is ``remove`` , the Application Load Balancer removes the ``X-Forwarded-For`` header in the HTTP request before it sends it to targets.
-            - ``routing.http2.enabled`` - Indicates whether HTTP/2 is enabled. The possible values are ``true`` and ``false`` . The default is ``true`` . Elastic Load Balancing requires that message header names contain only alphanumeric characters and hyphens.
+            - ``routing.http2.enabled`` - Indicates whether clients can connect to the load balancer using HTTP/2. If ``true`` , clients can connect using HTTP/2 or HTTP/1.1. However, all client requests are subject to the stricter HTTP/2 header validation rules. For example, message header names must contain only alphanumeric characters and hyphens. If ``false`` , clients must connect using HTTP/1.1. The default is ``true`` .
             - ``waf.fail_open.enabled`` - Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to AWS WAF. The possible values are ``true`` and ``false`` . The default is ``false`` .
 
             The following attributes are supported by only Network Load Balancers:

aws_cdk/aws_gameliftstreams/__init__.py

@@ -340,6 +340,7 @@ class CfnApplication(
             - Ubuntu 22.04 LTS ( ``Type=UBUNTU, Version=22_04_LTS`` )
             - For Windows applications
             - Microsoft Windows Server 2022 Base ( ``Type=WINDOWS, Version=2022`` )
+            - Proton 9.0-2 ( ``Type=PROTON, Version=20250516`` )
             - Proton 8.0-5 ( ``Type=PROTON, Version=20241007`` )
             - Proton 8.0-2c ( ``Type=PROTON, Version=20230704`` )
 
@@ -598,8 +599,8 @@ class CfnStreamGroup(
 
     There are two types of stream capacity: always-on and on-demand.
 
-    - *Always-on* : The streaming capacity that is allocated and ready to handle stream requests without delay. You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session.
-    - *On-demand* : The streaming capacity that Amazon GameLift Streams can allocate in response to stream requests, and then de-allocate when the session has terminated. This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes).
+    - *Always-on* : The streaming capacity that is allocated and ready to handle stream requests without delay. You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session. Default is 1 when creating a stream group or adding a location.
+    - *On-demand* : The streaming capacity that Amazon GameLift Streams can allocate in response to stream requests, and then de-allocate when the session has terminated. This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes). Default is 0 when creating a stream group or adding a location.
 
     .. epigraph::
 
@@ -904,8 +905,8 @@ class CfnStreamGroup(
             When configuring a location for the first time, you must specify a numeric value for at least one of the two capacity types.
 
             :param location_name: A location's name. For example, ``us-east-1`` . For a complete list of locations that Amazon GameLift Streams supports, refer to `Regions, quotas, and limitations <https://docs.aws.amazon.com/gameliftstreams/latest/developerguide/regions-quotas.html>`_ in the *Amazon GameLift Streams Developer Guide* .
-            :param always_on_capacity: The streaming capacity that is allocated and ready to handle stream requests without delay. You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session.
-            :param on_demand_capacity: The streaming capacity that Amazon GameLift Streams can allocate in response to stream requests, and then de-allocate when the session has terminated. This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes).
+            :param always_on_capacity: The streaming capacity that is allocated and ready to handle stream requests without delay. You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session. Default is 1 when creating a stream group or adding a location.
+            :param on_demand_capacity: The streaming capacity that Amazon GameLift Streams can allocate in response to stream requests, and then de-allocate when the session has terminated. This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes). Default is 0 when creating a stream group or adding a location.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-gameliftstreams-streamgroup-locationconfiguration.html
             :exampleMetadata: fixture=_generated
@@ -953,7 +954,7 @@ class CfnStreamGroup(
         def always_on_capacity(self) -> typing.Optional[jsii.Number]:
             '''The streaming capacity that is allocated and ready to handle stream requests without delay.
 
-            You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session.
+            You pay for this capacity whether it's in use or not. Best for quickest time from streaming request to streaming session. Default is 1 when creating a stream group or adding a location.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-gameliftstreams-streamgroup-locationconfiguration.html#cfn-gameliftstreams-streamgroup-locationconfiguration-alwaysoncapacity
             '''
@@ -964,7 +965,7 @@ class CfnStreamGroup(
         def on_demand_capacity(self) -> typing.Optional[jsii.Number]:
             '''The streaming capacity that Amazon GameLift Streams can allocate in response to stream requests, and then de-allocate when the session has terminated.
 
-            This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes).
+            This offers a cost control measure at the expense of a greater startup time (typically under 5 minutes). Default is 0 when creating a stream group or adding a location.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-gameliftstreams-streamgroup-locationconfiguration.html#cfn-gameliftstreams-streamgroup-locationconfiguration-ondemandcapacity
             '''

aws_cdk/aws_glue/__init__.py

@@ -7154,7 +7154,7 @@ class CfnJob(
         :param security_configuration: The name of the ``SecurityConfiguration`` structure to be used with this job.
         :param tags: The tags to use with this job.
         :param timeout: The job timeout in minutes. This is the maximum time that a job run can consume resources before it is terminated and enters TIMEOUT status. The default is 2,880 minutes (48 hours).
-        :param worker_type: The type of predefined worker that is allocated when a job runs. Accepts a value of G.1X, G.2X, G.4X, G.8X or G.025X for Spark jobs. Accepts the value Z.2X for Ray jobs. - For the ``G.1X`` worker type, each worker maps to 1 DPU (4 vCPUs, 16 GB of memory) with 94GB disk, and provides 1 executor per worker. We recommend this worker type for workloads such as data transforms, joins, and queries, to offers a scalable and cost effective way to run most jobs. - For the ``G.2X`` worker type, each worker maps to 2 DPU (8 vCPUs, 32 GB of memory) with 138GB disk, and provides 1 executor per worker. We recommend this worker type for workloads such as data transforms, joins, and queries, to offers a scalable and cost effective way to run most jobs. - For the ``G.4X`` worker type, each worker maps to 4 DPU (16 vCPUs, 64 GB of memory) with 256GB disk, and provides 1 executor per worker. We recommend this worker type for jobs whose workloads contain your most demanding transforms, aggregations, joins, and queries. This worker type is available only for AWS Glue version 3.0 or later Spark ETL jobs in the following AWS Regions: US East (Ohio), US East (N. Virginia), US West (N. California), US West (Oregon), Asia Pacific (Mumbai), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), Canada (Central), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Spain), Europe (Stockholm), and South America (São Paulo). - For the ``G.8X`` worker type, each worker maps to 8 DPU (32 vCPUs, 128 GB of memory) with 512GB disk, and provides 1 executor per worker. We recommend this worker type for jobs whose workloads contain your most demanding transforms, aggregations, joins, and queries. This worker type is available only for AWS Glue version 3.0 or later Spark ETL jobs, in the same AWS Regions as supported for the ``G.4X`` worker type. - For the ``G.025X`` worker type, each worker maps to 0.25 DPU (2 vCPUs, 4 GB of memory) with 84GB disk, and provides 1 executor per worker. We recommend this worker type for low volume streaming jobs. This worker type is only available for AWS Glue version 3.0 or later streaming jobs. - For the ``Z.2X`` worker type, each worker maps to 2 M-DPU (8vCPUs, 64 GB of memory) with 128 GB disk, and provides up to 8 Ray workers based on the autoscaler.
+        :param worker_type: The type of predefined worker that is allocated when a job runs. AWS Glue provides multiple worker types to accommodate different workload requirements: G Worker Types (General-purpose compute workers): - G.1X: 1 DPU (4 vCPUs, 16 GB memory, 94GB disk) - G.2X: 2 DPU (8 vCPUs, 32 GB memory, 138GB disk) - G.4X: 4 DPU (16 vCPUs, 64 GB memory, 256GB disk) - G.8X: 8 DPU (32 vCPUs, 128 GB memory, 512GB disk) - G.12X: 12 DPU (48 vCPUs, 192 GB memory, 768GB disk) - G.16X: 16 DPU (64 vCPUs, 256 GB memory, 1024GB disk) R Worker Types (Memory-optimized workers): - R.1X: 1 M-DPU (4 vCPUs, 32 GB memory) - R.2X: 2 M-DPU (8 vCPUs, 64 GB memory) - R.4X: 4 M-DPU (16 vCPUs, 128 GB memory) - R.8X: 8 M-DPU (32 vCPUs, 256 GB memory)
         '''
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__2bea698eff4ea1d2bc08b1ab842f318f77ba719c0241a0959453e26989b5b53e)
@@ -7919,7 +7919,7 @@ class CfnJobProps:
         :param security_configuration: The name of the ``SecurityConfiguration`` structure to be used with this job.
         :param tags: The tags to use with this job.
         :param timeout: The job timeout in minutes. This is the maximum time that a job run can consume resources before it is terminated and enters TIMEOUT status. The default is 2,880 minutes (48 hours).
-        :param worker_type: The type of predefined worker that is allocated when a job runs. Accepts a value of G.1X, G.2X, G.4X, G.8X or G.025X for Spark jobs. Accepts the value Z.2X for Ray jobs. - For the ``G.1X`` worker type, each worker maps to 1 DPU (4 vCPUs, 16 GB of memory) with 94GB disk, and provides 1 executor per worker. We recommend this worker type for workloads such as data transforms, joins, and queries, to offers a scalable and cost effective way to run most jobs. - For the ``G.2X`` worker type, each worker maps to 2 DPU (8 vCPUs, 32 GB of memory) with 138GB disk, and provides 1 executor per worker. We recommend this worker type for workloads such as data transforms, joins, and queries, to offers a scalable and cost effective way to run most jobs. - For the ``G.4X`` worker type, each worker maps to 4 DPU (16 vCPUs, 64 GB of memory) with 256GB disk, and provides 1 executor per worker. We recommend this worker type for jobs whose workloads contain your most demanding transforms, aggregations, joins, and queries. This worker type is available only for AWS Glue version 3.0 or later Spark ETL jobs in the following AWS Regions: US East (Ohio), US East (N. Virginia), US West (N. California), US West (Oregon), Asia Pacific (Mumbai), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), Canada (Central), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Spain), Europe (Stockholm), and South America (São Paulo). - For the ``G.8X`` worker type, each worker maps to 8 DPU (32 vCPUs, 128 GB of memory) with 512GB disk, and provides 1 executor per worker. We recommend this worker type for jobs whose workloads contain your most demanding transforms, aggregations, joins, and queries. This worker type is available only for AWS Glue version 3.0 or later Spark ETL jobs, in the same AWS Regions as supported for the ``G.4X`` worker type. - For the ``G.025X`` worker type, each worker maps to 0.25 DPU (2 vCPUs, 4 GB of memory) with 84GB disk, and provides 1 executor per worker. We recommend this worker type for low volume streaming jobs. This worker type is only available for AWS Glue version 3.0 or later streaming jobs. - For the ``Z.2X`` worker type, each worker maps to 2 M-DPU (8vCPUs, 64 GB of memory) with 128 GB disk, and provides up to 8 Ray workers based on the autoscaler.
+        :param worker_type: The type of predefined worker that is allocated when a job runs. AWS Glue provides multiple worker types to accommodate different workload requirements: G Worker Types (General-purpose compute workers): - G.1X: 1 DPU (4 vCPUs, 16 GB memory, 94GB disk) - G.2X: 2 DPU (8 vCPUs, 32 GB memory, 138GB disk) - G.4X: 4 DPU (16 vCPUs, 64 GB memory, 256GB disk) - G.8X: 8 DPU (32 vCPUs, 128 GB memory, 512GB disk) - G.12X: 12 DPU (48 vCPUs, 192 GB memory, 768GB disk) - G.16X: 16 DPU (64 vCPUs, 256 GB memory, 1024GB disk) R Worker Types (Memory-optimized workers): - R.1X: 1 M-DPU (4 vCPUs, 32 GB memory) - R.2X: 2 M-DPU (8 vCPUs, 64 GB memory) - R.4X: 4 M-DPU (16 vCPUs, 128 GB memory) - R.8X: 8 M-DPU (32 vCPUs, 256 GB memory)
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-glue-job.html
         :exampleMetadata: fixture=_generated
@@ -8304,14 +8304,23 @@ class CfnJobProps:
     def worker_type(self) -> typing.Optional[builtins.str]:
         '''The type of predefined worker that is allocated when a job runs.
 
-        Accepts a value of G.1X, G.2X, G.4X, G.8X or G.025X for Spark jobs. Accepts the value Z.2X for Ray jobs.
+        AWS Glue provides multiple worker types to accommodate different workload requirements:
 
-        - For the ``G.1X`` worker type, each worker maps to 1 DPU (4 vCPUs, 16 GB of memory) with 94GB disk, and provides 1 executor per worker. We recommend this worker type for workloads such as data transforms, joins, and queries, to offers a scalable and cost effective way to run most jobs.
-        - For the ``G.2X`` worker type, each worker maps to 2 DPU (8 vCPUs, 32 GB of memory) with 138GB disk, and provides 1 executor per worker. We recommend this worker type for workloads such as data transforms, joins, and queries, to offers a scalable and cost effective way to run most jobs.
-        - For the ``G.4X`` worker type, each worker maps to 4 DPU (16 vCPUs, 64 GB of memory) with 256GB disk, and provides 1 executor per worker. We recommend this worker type for jobs whose workloads contain your most demanding transforms, aggregations, joins, and queries. This worker type is available only for AWS Glue version 3.0 or later Spark ETL jobs in the following AWS Regions: US East (Ohio), US East (N. Virginia), US West (N. California), US West (Oregon), Asia Pacific (Mumbai), Asia Pacific (Seoul), Asia Pacific (Singapore), Asia Pacific (Sydney), Asia Pacific (Tokyo), Canada (Central), Europe (Frankfurt), Europe (Ireland), Europe (London), Europe (Spain), Europe (Stockholm), and South America (São Paulo).
-        - For the ``G.8X`` worker type, each worker maps to 8 DPU (32 vCPUs, 128 GB of memory) with 512GB disk, and provides 1 executor per worker. We recommend this worker type for jobs whose workloads contain your most demanding transforms, aggregations, joins, and queries. This worker type is available only for AWS Glue version 3.0 or later Spark ETL jobs, in the same AWS Regions as supported for the ``G.4X`` worker type.
-        - For the ``G.025X`` worker type, each worker maps to 0.25 DPU (2 vCPUs, 4 GB of memory) with 84GB disk, and provides 1 executor per worker. We recommend this worker type for low volume streaming jobs. This worker type is only available for AWS Glue version 3.0 or later streaming jobs.
-        - For the ``Z.2X`` worker type, each worker maps to 2 M-DPU (8vCPUs, 64 GB of memory) with 128 GB disk, and provides up to 8 Ray workers based on the autoscaler.
+        G Worker Types (General-purpose compute workers):
+
+        - G.1X: 1 DPU (4 vCPUs, 16 GB memory, 94GB disk)
+        - G.2X: 2 DPU (8 vCPUs, 32 GB memory, 138GB disk)
+        - G.4X: 4 DPU (16 vCPUs, 64 GB memory, 256GB disk)
+        - G.8X: 8 DPU (32 vCPUs, 128 GB memory, 512GB disk)
+        - G.12X: 12 DPU (48 vCPUs, 192 GB memory, 768GB disk)
+        - G.16X: 16 DPU (64 vCPUs, 256 GB memory, 1024GB disk)
+
+        R Worker Types (Memory-optimized workers):
+
+        - R.1X: 1 M-DPU (4 vCPUs, 32 GB memory)
+        - R.2X: 2 M-DPU (8 vCPUs, 64 GB memory)
+        - R.4X: 4 M-DPU (16 vCPUs, 128 GB memory)
+        - R.8X: 8 M-DPU (32 vCPUs, 256 GB memory)
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-glue-job.html#cfn-glue-job-workertype
         '''