aws-cdk-lib 2.202.0__py3-none-any.whl → 2.203.1__py3-none-any.whl

aws_cdk/aws_ecs/__init__.py

@@ -8522,7 +8522,34 @@ class CfnService(
 
     .. epigraph::
 
-       The stack update fails if you change any properties that require replacement and at least one Amazon ECS Service Connect ``ServiceConnectConfiguration`` property is configured. This is because AWS CloudFormation creates the replacement service first, but each ``ServiceConnectService`` must have a name that is unique in the namespace. > Starting April 15, 2023, AWS ; will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS , or Amazon EC2 . However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.
+       The stack update fails if you change any properties that require replacement and at least one Amazon ECS Service Connect ``ServiceConnectConfiguration`` property is configured. This is because AWS CloudFormation creates the replacement service first, but each ``ServiceConnectService`` must have a name that is unique in the namespace. > Starting April 15, 2023, AWS ; will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS , or Amazon EC2 . However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service. > On June 12, 2025, Amazon ECS launched support for updating capacity provider configuration for Amazon ECS services. With this launch, Amazon ECS also aligned the AWS CloudFormation update behavior for ``CapacityProviderStrategy`` parameter with the standard practice. For more information, see `Amazon ECS adds support for updating capacity provider configuration for ECS services <https://docs.aws.amazon.com/about-aws/whats-new/2025/05/amazon-ecs-capacity-provider-configuration-ecs/>`_ . Previously Amazon ECS ignored the ``CapacityProviderStrategy`` property if it was set to an empty list for example, ``[]`` in AWS CloudFormation , because updating capacity provider configuration was not supported. Now, with support for capacity provider updates, customers can remove capacity providers from a service by passing an empty list. When you specify an empty list ( ``[]`` ) for the ``CapacityProviderStrategy`` property in your AWS CloudFormation template, Amazon ECS will remove any capacity providers associated with the service, as follows:
+
+       - For services created with a capacity provider strategy after the launch:
+       - If there's a cluster default strategy set, the service will revert to using that default strategy.
+       - If no cluster default strategy exists, you will receive the following error:
+
+       No launch type to fall back to for empty capacity provider strategy. Your service was not created with a launch type.
+
+       - For services created with a capacity provider strategy prior to the launch:
+       - If ``CapacityProviderStrategy`` had ``FARGATE_SPOT`` or ``FARGATE`` capacity providers, the launch type will be updated to ``FARGATE`` and the capacity provider will be removed.
+       - If the strategy included Auto Scaling group capacity providers, the service will revert to EC2 launch type, and the Auto Scaling group capacity providers will not be used.
+
+       Recommended Actions
+
+       If you are currently using ``CapacityProviderStrategy: []`` in your AWS CloudFormation templates, you should take one of the following actions:
+
+       - If you do not intend to update the Capacity Provider Strategy:
+       - Remove the ``CapacityProviderStrategy`` property entirely from your AWS CloudFormation template
+       - Alternatively, use ``!Ref AWS ::NoValue`` for the ``CapacityProviderStrategy`` property in your template
+       - If you intend to maintain or update the Capacity Provider Strategy, specify the actual Capacity Provider Strategy for the service in your AWS CloudFormation template.
+
+       If your AWS CloudFormation template had an empty list ([]) for ``CapacityProviderStrategy`` prior to the aforementioned launch on June 12, and you are using the same template with ``CapacityProviderStrategy: []`` , you might encounter the following error:
+
+       Invalid request provided: When switching from launch type to capacity provider strategy on an existing service, or making a change to a capacity provider strategy on a service that is already using one, you must force a new deployment. (Service: Ecs, Status Code: 400, Request ID: xxx) (SDK Attempt Count: 1)" (RequestToken: xxx HandlerErrorCode: InvalidRequest)
+
+       Note that AWS CloudFormation automatically initiates a new deployment when it detects a parameter change, but customers cannot choose to force a deployment through AWS CloudFormation . This is an invalid input scenario that requires one of the remediation actions listed above.
+
+       If you are experiencing active production issues related to this change, contact AWS Support or your Technical Account Manager.
 
     :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecs-service.html
     :cloudformationResource: AWS::ECS::Service
@@ -10099,7 +10126,7 @@ class CfnService(
             - For tasks that are on AWS Fargate , because you don't have access to the underlying infrastructure your tasks are hosted on, any additional software needed must be installed outside of the task. For example, the Fluentd output aggregators or a remote host running Logstash to send Gelf logs to.
 
             :param log_driver: The log driver to use for the container. For tasks on AWS Fargate , the supported log drivers are ``awslogs`` , ``splunk`` , and ``awsfirelens`` . For tasks hosted on Amazon EC2 instances, the supported log drivers are ``awslogs`` , ``fluentd`` , ``gelf`` , ``json-file`` , ``journald`` , ``syslog`` , ``splunk`` , and ``awsfirelens`` . For more information about using the ``awslogs`` log driver, see `Send Amazon ECS logs to CloudWatch <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_awslogs.html>`_ in the *Amazon Elastic Container Service Developer Guide* . For more information about using the ``awsfirelens`` log driver, see `Send Amazon ECS logs to an AWS service or AWS Partner <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_firelens.html>`_ . .. epigraph:: If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's `available on GitHub <https://docs.aws.amazon.com/https://github.com/aws/amazon-ecs-agent>`_ and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
-            :param options: The configuration options to send to the log driver. The options you can specify depend on the log driver. Some of the options you can specify when you use the ``awslogs`` log driver to route logs to Amazon CloudWatch include the following: - **awslogs-create-group** - Required: No Specify whether you want the log group to be created automatically. If this option isn't specified, it defaults to ``false`` . .. epigraph:: Your IAM policy must include the ``logs:CreateLogGroup`` permission before you attempt to use ``awslogs-create-group`` . - **awslogs-region** - Required: Yes Specify the AWS Region that the ``awslogs`` log driver is to send your Docker logs to. You can choose to send all of your logs from clusters in different Regions to a single region in CloudWatch Logs. This is so that they're all visible in one location. Otherwise, you can separate them by Region for more granularity. Make sure that the specified log group exists in the Region that you specify with this option. - **awslogs-group** - Required: Yes Make sure to specify a log group that the ``awslogs`` log driver sends its log streams to. - **awslogs-stream-prefix** - Required: Yes, when using Fargate.Optional when using EC2. Use the ``awslogs-stream-prefix`` option to associate a log stream with the specified prefix, the container name, and the ID of the Amazon ECS task that the container belongs to. If you specify a prefix with this option, then the log stream takes the format ``prefix-name/container-name/ecs-task-id`` . If you don't specify a prefix with this option, then the log stream is named after the container ID that's assigned by the Docker daemon on the container instance. Because it's difficult to trace logs back to the container that sent them with just the Docker container ID (which is only available on the container instance), we recommend that you specify a prefix with this option. For Amazon ECS services, you can use the service name as the prefix. Doing so, you can trace log streams to the service that the container belongs to, the name of the container that sent them, and the ID of the task that the container belongs to. You must specify a stream-prefix for your logs to have your logs appear in the Log pane when using the Amazon ECS console. - **awslogs-datetime-format** - Required: No This option defines a multiline start pattern in Python ``strftime`` format. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. One example of a use case for using this format is for parsing output such as a stack dump, which might otherwise be logged in multiple entries. The correct pattern allows it to be captured in a single entry. For more information, see `awslogs-datetime-format <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-datetime-format>`_ . You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. - **awslogs-multiline-pattern** - Required: No This option defines a multiline start pattern that uses a regular expression. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. For more information, see `awslogs-multiline-pattern <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-multiline-pattern>`_ . This option is ignored if ``awslogs-datetime-format`` is also configured. You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. The following options apply to all supported log drivers. - **mode** - Required: No Valid values: ``non-blocking`` | ``blocking`` This option defines the delivery mode of log messages from the container to the log driver specified using ``logDriver`` . The delivery mode you choose affects application availability when the flow of logs from container is interrupted. If you use the ``blocking`` mode and the flow of logs is interrupted, calls from container code to write to the ``stdout`` and ``stderr`` streams will block. The logging thread of the application will block as a result. This may cause the application to become unresponsive and lead to container healthcheck failure. If you use the ``non-blocking`` mode, the container's logs are instead stored in an in-memory intermediate buffer configured with the ``max-buffer-size`` option. This prevents the application from becoming unresponsive when logs cannot be sent. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see `Preventing log loss with non-blocking mode in the ``awslogs`` container log driver <https://docs.aws.amazon.com/containers/preventing-log-loss-with-non-blocking-mode-in-the-awslogs-container-log-driver/>`_ . You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* . .. epigraph:: On June 25, 2025, Amazon ECS is changing the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following: - Set the ``mode`` option in your container definition's ``logConfiguration`` as ``blocking`` . - Set the ``defaultLogDriverMode`` account setting to ``blocking`` . - **max-buffer-size** - Required: No Default value: ``1m`` When ``non-blocking`` mode is used, the ``max-buffer-size`` log option controls the size of the buffer that's used for intermediate message storage. Make sure to specify an adequate buffer size based on your application. When the buffer fills up, further logs cannot be stored. Logs that cannot be stored are lost. To route logs using the ``splunk`` log router, you need to specify a ``splunk-token`` and a ``splunk-url`` . When you use the ``awsfirelens`` log router to route logs to an AWS Service or AWS Partner Network destination for log storage and analytics, you can set the ``log-driver-buffer-limit`` option to limit the number of events that are buffered in memory, before being sent to the log router container. It can help to resolve potential log loss issue because high throughput might result in memory running out for the buffer inside of Docker. Other options you can specify when using ``awsfirelens`` to route logs depend on the destination. When you export logs to Amazon Data Firehose, you can specify the AWS Region with ``region`` and a name for the log stream with ``delivery_stream`` . When you export logs to Amazon Kinesis Data Streams, you can specify an AWS Region with ``region`` and a data stream name with ``stream`` . When you export logs to Amazon OpenSearch Service, you can specify options like ``Name`` , ``Host`` (OpenSearch Service endpoint without protocol), ``Port`` , ``Index`` , ``Type`` , ``Aws_auth`` , ``Aws_region`` , ``Suppress_Type_Name`` , and ``tls`` . For more information, see `Under the hood: FireLens for Amazon ECS Tasks <https://docs.aws.amazon.com/containers/under-the-hood-firelens-for-amazon-ecs-tasks/>`_ . When you export logs to Amazon S3, you can specify the bucket using the ``bucket`` option. You can also specify ``region`` , ``total_file_size`` , ``upload_timeout`` , and ``use_put_object`` as options. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: ``sudo docker version --format '{{.Server.APIVersion}}'``
+            :param options: The configuration options to send to the log driver. The options you can specify depend on the log driver. Some of the options you can specify when you use the ``awslogs`` log driver to route logs to Amazon CloudWatch include the following: - **awslogs-create-group** - Required: No Specify whether you want the log group to be created automatically. If this option isn't specified, it defaults to ``false`` . .. epigraph:: Your IAM policy must include the ``logs:CreateLogGroup`` permission before you attempt to use ``awslogs-create-group`` . - **awslogs-region** - Required: Yes Specify the AWS Region that the ``awslogs`` log driver is to send your Docker logs to. You can choose to send all of your logs from clusters in different Regions to a single region in CloudWatch Logs. This is so that they're all visible in one location. Otherwise, you can separate them by Region for more granularity. Make sure that the specified log group exists in the Region that you specify with this option. - **awslogs-group** - Required: Yes Make sure to specify a log group that the ``awslogs`` log driver sends its log streams to. - **awslogs-stream-prefix** - Required: Yes, when using Fargate.Optional when using EC2. Use the ``awslogs-stream-prefix`` option to associate a log stream with the specified prefix, the container name, and the ID of the Amazon ECS task that the container belongs to. If you specify a prefix with this option, then the log stream takes the format ``prefix-name/container-name/ecs-task-id`` . If you don't specify a prefix with this option, then the log stream is named after the container ID that's assigned by the Docker daemon on the container instance. Because it's difficult to trace logs back to the container that sent them with just the Docker container ID (which is only available on the container instance), we recommend that you specify a prefix with this option. For Amazon ECS services, you can use the service name as the prefix. Doing so, you can trace log streams to the service that the container belongs to, the name of the container that sent them, and the ID of the task that the container belongs to. You must specify a stream-prefix for your logs to have your logs appear in the Log pane when using the Amazon ECS console. - **awslogs-datetime-format** - Required: No This option defines a multiline start pattern in Python ``strftime`` format. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. One example of a use case for using this format is for parsing output such as a stack dump, which might otherwise be logged in multiple entries. The correct pattern allows it to be captured in a single entry. For more information, see `awslogs-datetime-format <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-datetime-format>`_ . You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. - **awslogs-multiline-pattern** - Required: No This option defines a multiline start pattern that uses a regular expression. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. For more information, see `awslogs-multiline-pattern <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-multiline-pattern>`_ . This option is ignored if ``awslogs-datetime-format`` is also configured. You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. The following options apply to all supported log drivers. - **mode** - Required: No Valid values: ``non-blocking`` | ``blocking`` This option defines the delivery mode of log messages from the container to the log driver specified using ``logDriver`` . The delivery mode you choose affects application availability when the flow of logs from container is interrupted. If you use the ``blocking`` mode and the flow of logs is interrupted, calls from container code to write to the ``stdout`` and ``stderr`` streams will block. The logging thread of the application will block as a result. This may cause the application to become unresponsive and lead to container healthcheck failure. If you use the ``non-blocking`` mode, the container's logs are instead stored in an in-memory intermediate buffer configured with the ``max-buffer-size`` option. This prevents the application from becoming unresponsive when logs cannot be sent. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see `Preventing log loss with non-blocking mode in the ``awslogs`` container log driver <https://docs.aws.amazon.com/containers/preventing-log-loss-with-non-blocking-mode-in-the-awslogs-container-log-driver/>`_ . You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``non-blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* . .. epigraph:: On June 25, 2025, Amazon ECS changed the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following: - Set the ``mode`` option in your container definition's ``logConfiguration`` as ``blocking`` . - Set the ``defaultLogDriverMode`` account setting to ``blocking`` . - **max-buffer-size** - Required: No Default value: ``1m`` When ``non-blocking`` mode is used, the ``max-buffer-size`` log option controls the size of the buffer that's used for intermediate message storage. Make sure to specify an adequate buffer size based on your application. When the buffer fills up, further logs cannot be stored. Logs that cannot be stored are lost. To route logs using the ``splunk`` log router, you need to specify a ``splunk-token`` and a ``splunk-url`` . When you use the ``awsfirelens`` log router to route logs to an AWS Service or AWS Partner Network destination for log storage and analytics, you can set the ``log-driver-buffer-limit`` option to limit the number of events that are buffered in memory, before being sent to the log router container. It can help to resolve potential log loss issue because high throughput might result in memory running out for the buffer inside of Docker. Other options you can specify when using ``awsfirelens`` to route logs depend on the destination. When you export logs to Amazon Data Firehose, you can specify the AWS Region with ``region`` and a name for the log stream with ``delivery_stream`` . When you export logs to Amazon Kinesis Data Streams, you can specify an AWS Region with ``region`` and a data stream name with ``stream`` . When you export logs to Amazon OpenSearch Service, you can specify options like ``Name`` , ``Host`` (OpenSearch Service endpoint without protocol), ``Port`` , ``Index`` , ``Type`` , ``Aws_auth`` , ``Aws_region`` , ``Suppress_Type_Name`` , and ``tls`` . For more information, see `Under the hood: FireLens for Amazon ECS Tasks <https://docs.aws.amazon.com/containers/under-the-hood-firelens-for-amazon-ecs-tasks/>`_ . When you export logs to Amazon S3, you can specify the bucket using the ``bucket`` option. You can also specify ``region`` , ``total_file_size`` , ``upload_timeout`` , and ``use_put_object`` as options. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: ``sudo docker version --format '{{.Server.APIVersion}}'``
             :param secret_options: The secrets to pass to the log configuration. For more information, see `Specifying sensitive data <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data.html>`_ in the *Amazon Elastic Container Service Developer Guide* .
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecs-service-logconfiguration.html
@@ -10226,10 +10253,10 @@ class CfnService(
 
             If you use the ``non-blocking`` mode, the container's logs are instead stored in an in-memory intermediate buffer configured with the ``max-buffer-size`` option. This prevents the application from becoming unresponsive when logs cannot be sent. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see `Preventing log loss with non-blocking mode in the ``awslogs`` container log driver <https://docs.aws.amazon.com/containers/preventing-log-loss-with-non-blocking-mode-in-the-awslogs-container-log-driver/>`_ .
 
-            You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* .
+            You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``non-blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* .
             .. epigraph::
 
-               On June 25, 2025, Amazon ECS is changing the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following:
+               On June 25, 2025, Amazon ECS changed the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following:
 
                - Set the ``mode`` option in your container definition's ``logConfiguration`` as ``blocking`` .
                - Set the ``defaultLogDriverMode`` account setting to ``blocking`` .
@@ -12858,7 +12885,7 @@ class CfnTaskDefinition(
         :param ephemeral_storage: The ephemeral storage settings to use for tasks run with the task definition.
         :param execution_role_arn: The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make AWS API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see `IAM roles for Amazon ECS <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/security-ecs-iam-role-overview.html>`_ in the *Amazon Elastic Container Service Developer Guide* .
         :param family: The name of a family that this task definition is registered to. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add. .. epigraph:: To use revision numbers when you update a task definition, specify this property. If you don't specify a value, AWS CloudFormation generates a new task definition each time that you update it.
-        :param inference_accelerators: The Elastic Inference accelerators to use for the containers in the task.
+        :param inference_accelerators: (deprecated) The Elastic Inference accelerators to use for the containers in the task.
         :param ipc_mode: The IPC resource namespace to use for the containers in the task. The valid values are ``host`` , ``task`` , or ``none`` . If ``host`` is specified, then all containers within the tasks that specified the ``host`` IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If ``task`` is specified, all containers within the specified task share the same IPC resources. If ``none`` is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. If the ``host`` IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. If you are setting namespaced kernel parameters using ``systemControls`` for the containers in the task, the following will apply to your IPC resource namespace. For more information, see `System Controls <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_definition_parameters.html>`_ in the *Amazon Elastic Container Service Developer Guide* . - For tasks that use the ``host`` IPC mode, IPC namespace related ``systemControls`` are not supported. - For tasks that use the ``task`` IPC mode, IPC namespace related ``systemControls`` will apply to all containers within a task. .. epigraph:: This parameter is not supported for Windows containers or tasks run on AWS Fargate .
         :param memory: The amount (in MiB) of memory used by the task. If your tasks runs on Amazon EC2 instances, you must specify either a task-level memory value or a container-level memory value. This field is optional and any value can be used. If a task-level memory value is specified, the container-level memory value is optional. For more information regarding container-level memory and memory reservation, see `ContainerDefinition <https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ContainerDefinition.html>`_ . If your tasks runs on AWS Fargate , this field is required. You must use one of the following values. The value you choose determines your range of valid values for the ``cpu`` parameter. - 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available ``cpu`` values: 256 (.25 vCPU) - 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available ``cpu`` values: 512 (.5 vCPU) - 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available ``cpu`` values: 1024 (1 vCPU) - Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available ``cpu`` values: 2048 (2 vCPU) - Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available ``cpu`` values: 4096 (4 vCPU) - Between 16 GB and 60 GB in 4 GB increments - Available ``cpu`` values: 8192 (8 vCPU) This option requires Linux platform ``1.4.0`` or later. - Between 32GB and 120 GB in 8 GB increments - Available ``cpu`` values: 16384 (16 vCPU) This option requires Linux platform ``1.4.0`` or later.
         :param network_mode: The Docker networking mode to use for the containers in the task. The valid values are ``none`` , ``bridge`` , ``awsvpc`` , and ``host`` . If no network mode is specified, the default is ``bridge`` . For Amazon ECS tasks on Fargate, the ``awsvpc`` network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances, ``<default>`` or ``awsvpc`` can be used. If the network mode is set to ``none`` , you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The ``host`` and ``awsvpc`` network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the ``bridge`` mode. With the ``host`` and ``awsvpc`` network modes, exposed container ports are mapped directly to the corresponding host port (for the ``host`` network mode) or the attached elastic network interface port (for the ``awsvpc`` network mode), so you cannot take advantage of dynamic host port mappings. .. epigraph:: When using the ``host`` network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user. If the network mode is ``awsvpc`` , the task is allocated an elastic network interface, and you must specify a `NetworkConfiguration <https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_NetworkConfiguration.html>`_ value when you create a service or run a task with the task definition. For more information, see `Task Networking <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html>`_ in the *Amazon Elastic Container Service Developer Guide* . If the network mode is ``host`` , you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
@@ -13046,7 +13073,12 @@ class CfnTaskDefinition(
     def inference_accelerators(
         self,
     ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, "CfnTaskDefinition.InferenceAcceleratorProperty"]]]]:
-        '''The Elastic Inference accelerators to use for the containers in the task.'''
+        '''(deprecated) The Elastic Inference accelerators to use for the containers in the task.
+
+        :deprecated: this property has been deprecated
+
+        :stability: deprecated
+        '''
         return typing.cast(typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, "CfnTaskDefinition.InferenceAcceleratorProperty"]]]], jsii.get(self, "inferenceAccelerators"))
 
     @inference_accelerators.setter
@@ -13398,7 +13430,7 @@ class CfnTaskDefinition(
 
             Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
 
-            :param image: The image used to start a container. This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either ``*repository-url* / *image* : *tag*`` or ``*repository-url* / *image* @ *digest*`` . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to ``Image`` in the docker container create command and the ``IMAGE`` parameter of docker run. - When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image aren't propagated to already running tasks. - Images in Amazon ECR repositories can be specified by either using the full ``registry/repository:tag`` or ``registry/repository@digest`` . For example, ``012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest`` or ``012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE`` . - Images in official repositories on Docker Hub use a single name (for example, ``ubuntu`` or ``mongo`` ). - Images in other repositories on Docker Hub are qualified with an organization name (for example, ``amazon/amazon-ecs-agent`` ). - Images in other online repositories are qualified further by a domain name (for example, ``quay.io/assemblyline/ubuntu`` ).
+            :param image: The image used to start a container. This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either ``*repository-url* / *image* : *tag*`` or ``*repository-url* / *image* @ *digest*`` . For images using tags (repository-url/image:tag), up to 255 characters total are allowed, including letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs (#). For images using digests (repository-url/image@digest), the 255 character limit applies only to the repository URL and image name (everything before the @ sign). The only supported hash function is sha256, and the hash value after sha256: must be exactly 64 characters (only letters A-F, a-f, and numbers 0-9 are allowed). This parameter maps to ``Image`` in the docker container create command and the ``IMAGE`` parameter of docker run. - When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image aren't propagated to already running tasks. - Images in Amazon ECR repositories can be specified by either using the full ``registry/repository:tag`` or ``registry/repository@digest`` . For example, ``012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest`` or ``012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE`` . - Images in official repositories on Docker Hub use a single name (for example, ``ubuntu`` or ``mongo`` ). - Images in other repositories on Docker Hub are qualified with an organization name (for example, ``amazon/amazon-ecs-agent`` ). - Images in other online repositories are qualified further by a domain name (for example, ``quay.io/assemblyline/ubuntu`` ).
             :param name: The name of a container. If you're linking multiple containers together in a task definition, the ``name`` of one container can be entered in the ``links`` of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed. This parameter maps to ``name`` in the docker container create command and the ``--name`` option to docker run.
             :param command: The command that's passed to the container. This parameter maps to ``Cmd`` in the docker container create command and the ``COMMAND`` parameter to docker run. If there are multiple arguments, each argument is a separated string in the array.
             :param cpu: The number of ``cpu`` units reserved for the container. This parameter maps to ``CpuShares`` in the docker container create commandand the ``--cpu-shares`` option to docker run. This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level ``cpu`` value. .. epigraph:: You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the `Amazon EC2 Instances <https://docs.aws.amazon.com/ec2/instance-types/>`_ detail page by 1,024. Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that's the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task is guaranteed a minimum of 512 CPU units when needed. Moreover, each container could float to higher CPU usage if the other container was not using it. If both tasks were 100% active all of the time, they would be limited to 512 CPU units. On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. The minimum valid CPU share value that the Linux kernel allows is 2, and the maximum valid CPU share value that the Linux kernel allows is 262144. However, the CPU parameter isn't required, and you can use CPU values below 2 or above 262144 in your container definitions. For CPU values below 2 (including null) or above 262144, the behavior varies based on your Amazon ECS container agent version: - *Agent versions less than or equal to 1.1.0:* Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares. - *Agent versions greater than or equal to 1.2.0:* Null, zero, and CPU values of 1 are passed to Docker as 2. - *Agent versions greater than or equal to 1.84.0:* CPU values greater than 256 vCPU are passed to Docker as 256, which is equivalent to 262144 CPU shares. On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that's described in the task definition. A null or zero CPU value is passed to Docker as ``0`` , which Windows interprets as 1% of one CPU.
@@ -13720,7 +13752,7 @@ class CfnTaskDefinition(
         def image(self) -> builtins.str:
             '''The image used to start a container.
 
-            This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either ``*repository-url* / *image* : *tag*`` or ``*repository-url* / *image* @ *digest*`` . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to ``Image`` in the docker container create command and the ``IMAGE`` parameter of docker run.
+            This string is passed directly to the Docker daemon. By default, images in the Docker Hub registry are available. Other repositories are specified with either ``*repository-url* / *image* : *tag*`` or ``*repository-url* / *image* @ *digest*`` . For images using tags (repository-url/image:tag), up to 255 characters total are allowed, including letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs (#). For images using digests (repository-url/image@digest), the 255 character limit applies only to the repository URL and image name (everything before the @ sign). The only supported hash function is sha256, and the hash value after sha256: must be exactly 64 characters (only letters A-F, a-f, and numbers 0-9 are allowed). This parameter maps to ``Image`` in the docker container create command and the ``IMAGE`` parameter of docker run.
 
             - When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image aren't propagated to already running tasks.
             - Images in Amazon ECR repositories can be specified by either using the full ``registry/repository:tag`` or ``registry/repository@digest`` . For example, ``012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest`` or ``012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE`` .
@@ -16039,7 +16071,7 @@ class CfnTaskDefinition(
             '''The ``LogConfiguration`` property specifies log configuration options to send to a custom log driver for the container.
 
             :param log_driver: The log driver to use for the container. For tasks on AWS Fargate , the supported log drivers are ``awslogs`` , ``splunk`` , and ``awsfirelens`` . For tasks hosted on Amazon EC2 instances, the supported log drivers are ``awslogs`` , ``fluentd`` , ``gelf`` , ``json-file`` , ``journald`` , ``syslog`` , ``splunk`` , and ``awsfirelens`` . For more information about using the ``awslogs`` log driver, see `Send Amazon ECS logs to CloudWatch <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_awslogs.html>`_ in the *Amazon Elastic Container Service Developer Guide* . For more information about using the ``awsfirelens`` log driver, see `Send Amazon ECS logs to an AWS service or AWS Partner <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_firelens.html>`_ . .. epigraph:: If you have a custom driver that isn't listed, you can fork the Amazon ECS container agent project that's `available on GitHub <https://docs.aws.amazon.com/https://github.com/aws/amazon-ecs-agent>`_ and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, we don't currently provide support for running modified copies of this software.
-            :param options: The configuration options to send to the log driver. The options you can specify depend on the log driver. Some of the options you can specify when you use the ``awslogs`` log driver to route logs to Amazon CloudWatch include the following: - **awslogs-create-group** - Required: No Specify whether you want the log group to be created automatically. If this option isn't specified, it defaults to ``false`` . .. epigraph:: Your IAM policy must include the ``logs:CreateLogGroup`` permission before you attempt to use ``awslogs-create-group`` . - **awslogs-region** - Required: Yes Specify the AWS Region that the ``awslogs`` log driver is to send your Docker logs to. You can choose to send all of your logs from clusters in different Regions to a single region in CloudWatch Logs. This is so that they're all visible in one location. Otherwise, you can separate them by Region for more granularity. Make sure that the specified log group exists in the Region that you specify with this option. - **awslogs-group** - Required: Yes Make sure to specify a log group that the ``awslogs`` log driver sends its log streams to. - **awslogs-stream-prefix** - Required: Yes, when using Fargate.Optional when using EC2. Use the ``awslogs-stream-prefix`` option to associate a log stream with the specified prefix, the container name, and the ID of the Amazon ECS task that the container belongs to. If you specify a prefix with this option, then the log stream takes the format ``prefix-name/container-name/ecs-task-id`` . If you don't specify a prefix with this option, then the log stream is named after the container ID that's assigned by the Docker daemon on the container instance. Because it's difficult to trace logs back to the container that sent them with just the Docker container ID (which is only available on the container instance), we recommend that you specify a prefix with this option. For Amazon ECS services, you can use the service name as the prefix. Doing so, you can trace log streams to the service that the container belongs to, the name of the container that sent them, and the ID of the task that the container belongs to. You must specify a stream-prefix for your logs to have your logs appear in the Log pane when using the Amazon ECS console. - **awslogs-datetime-format** - Required: No This option defines a multiline start pattern in Python ``strftime`` format. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. One example of a use case for using this format is for parsing output such as a stack dump, which might otherwise be logged in multiple entries. The correct pattern allows it to be captured in a single entry. For more information, see `awslogs-datetime-format <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-datetime-format>`_ . You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. - **awslogs-multiline-pattern** - Required: No This option defines a multiline start pattern that uses a regular expression. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. For more information, see `awslogs-multiline-pattern <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-multiline-pattern>`_ . This option is ignored if ``awslogs-datetime-format`` is also configured. You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. The following options apply to all supported log drivers. - **mode** - Required: No Valid values: ``non-blocking`` | ``blocking`` This option defines the delivery mode of log messages from the container to the log driver specified using ``logDriver`` . The delivery mode you choose affects application availability when the flow of logs from container is interrupted. If you use the ``blocking`` mode and the flow of logs is interrupted, calls from container code to write to the ``stdout`` and ``stderr`` streams will block. The logging thread of the application will block as a result. This may cause the application to become unresponsive and lead to container healthcheck failure. If you use the ``non-blocking`` mode, the container's logs are instead stored in an in-memory intermediate buffer configured with the ``max-buffer-size`` option. This prevents the application from becoming unresponsive when logs cannot be sent. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see `Preventing log loss with non-blocking mode in the ``awslogs`` container log driver <https://docs.aws.amazon.com/containers/preventing-log-loss-with-non-blocking-mode-in-the-awslogs-container-log-driver/>`_ . You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* . .. epigraph:: On June 25, 2025, Amazon ECS is changing the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following: - Set the ``mode`` option in your container definition's ``logConfiguration`` as ``blocking`` . - Set the ``defaultLogDriverMode`` account setting to ``blocking`` . - **max-buffer-size** - Required: No Default value: ``1m`` When ``non-blocking`` mode is used, the ``max-buffer-size`` log option controls the size of the buffer that's used for intermediate message storage. Make sure to specify an adequate buffer size based on your application. When the buffer fills up, further logs cannot be stored. Logs that cannot be stored are lost. To route logs using the ``splunk`` log router, you need to specify a ``splunk-token`` and a ``splunk-url`` . When you use the ``awsfirelens`` log router to route logs to an AWS Service or AWS Partner Network destination for log storage and analytics, you can set the ``log-driver-buffer-limit`` option to limit the number of events that are buffered in memory, before being sent to the log router container. It can help to resolve potential log loss issue because high throughput might result in memory running out for the buffer inside of Docker. Other options you can specify when using ``awsfirelens`` to route logs depend on the destination. When you export logs to Amazon Data Firehose, you can specify the AWS Region with ``region`` and a name for the log stream with ``delivery_stream`` . When you export logs to Amazon Kinesis Data Streams, you can specify an AWS Region with ``region`` and a data stream name with ``stream`` . When you export logs to Amazon OpenSearch Service, you can specify options like ``Name`` , ``Host`` (OpenSearch Service endpoint without protocol), ``Port`` , ``Index`` , ``Type`` , ``Aws_auth`` , ``Aws_region`` , ``Suppress_Type_Name`` , and ``tls`` . For more information, see `Under the hood: FireLens for Amazon ECS Tasks <https://docs.aws.amazon.com/containers/under-the-hood-firelens-for-amazon-ecs-tasks/>`_ . When you export logs to Amazon S3, you can specify the bucket using the ``bucket`` option. You can also specify ``region`` , ``total_file_size`` , ``upload_timeout`` , and ``use_put_object`` as options. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: ``sudo docker version --format '{{.Server.APIVersion}}'``
+            :param options: The configuration options to send to the log driver. The options you can specify depend on the log driver. Some of the options you can specify when you use the ``awslogs`` log driver to route logs to Amazon CloudWatch include the following: - **awslogs-create-group** - Required: No Specify whether you want the log group to be created automatically. If this option isn't specified, it defaults to ``false`` . .. epigraph:: Your IAM policy must include the ``logs:CreateLogGroup`` permission before you attempt to use ``awslogs-create-group`` . - **awslogs-region** - Required: Yes Specify the AWS Region that the ``awslogs`` log driver is to send your Docker logs to. You can choose to send all of your logs from clusters in different Regions to a single region in CloudWatch Logs. This is so that they're all visible in one location. Otherwise, you can separate them by Region for more granularity. Make sure that the specified log group exists in the Region that you specify with this option. - **awslogs-group** - Required: Yes Make sure to specify a log group that the ``awslogs`` log driver sends its log streams to. - **awslogs-stream-prefix** - Required: Yes, when using Fargate.Optional when using EC2. Use the ``awslogs-stream-prefix`` option to associate a log stream with the specified prefix, the container name, and the ID of the Amazon ECS task that the container belongs to. If you specify a prefix with this option, then the log stream takes the format ``prefix-name/container-name/ecs-task-id`` . If you don't specify a prefix with this option, then the log stream is named after the container ID that's assigned by the Docker daemon on the container instance. Because it's difficult to trace logs back to the container that sent them with just the Docker container ID (which is only available on the container instance), we recommend that you specify a prefix with this option. For Amazon ECS services, you can use the service name as the prefix. Doing so, you can trace log streams to the service that the container belongs to, the name of the container that sent them, and the ID of the task that the container belongs to. You must specify a stream-prefix for your logs to have your logs appear in the Log pane when using the Amazon ECS console. - **awslogs-datetime-format** - Required: No This option defines a multiline start pattern in Python ``strftime`` format. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. One example of a use case for using this format is for parsing output such as a stack dump, which might otherwise be logged in multiple entries. The correct pattern allows it to be captured in a single entry. For more information, see `awslogs-datetime-format <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-datetime-format>`_ . You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. - **awslogs-multiline-pattern** - Required: No This option defines a multiline start pattern that uses a regular expression. A log message consists of a line that matches the pattern and any following lines that don’t match the pattern. The matched line is the delimiter between log messages. For more information, see `awslogs-multiline-pattern <https://docs.aws.amazon.com/https://docs.docker.com/config/containers/logging/awslogs/#awslogs-multiline-pattern>`_ . This option is ignored if ``awslogs-datetime-format`` is also configured. You cannot configure both the ``awslogs-datetime-format`` and ``awslogs-multiline-pattern`` options. .. epigraph:: Multiline logging performs regular expression parsing and matching of all log messages. This might have a negative impact on logging performance. The following options apply to all supported log drivers. - **mode** - Required: No Valid values: ``non-blocking`` | ``blocking`` This option defines the delivery mode of log messages from the container to the log driver specified using ``logDriver`` . The delivery mode you choose affects application availability when the flow of logs from container is interrupted. If you use the ``blocking`` mode and the flow of logs is interrupted, calls from container code to write to the ``stdout`` and ``stderr`` streams will block. The logging thread of the application will block as a result. This may cause the application to become unresponsive and lead to container healthcheck failure. If you use the ``non-blocking`` mode, the container's logs are instead stored in an in-memory intermediate buffer configured with the ``max-buffer-size`` option. This prevents the application from becoming unresponsive when logs cannot be sent. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see `Preventing log loss with non-blocking mode in the ``awslogs`` container log driver <https://docs.aws.amazon.com/containers/preventing-log-loss-with-non-blocking-mode-in-the-awslogs-container-log-driver/>`_ . You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``non-blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* . .. epigraph:: On June 25, 2025, Amazon ECS changed the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following: - Set the ``mode`` option in your container definition's ``logConfiguration`` as ``blocking`` . - Set the ``defaultLogDriverMode`` account setting to ``blocking`` . - **max-buffer-size** - Required: No Default value: ``1m`` When ``non-blocking`` mode is used, the ``max-buffer-size`` log option controls the size of the buffer that's used for intermediate message storage. Make sure to specify an adequate buffer size based on your application. When the buffer fills up, further logs cannot be stored. Logs that cannot be stored are lost. To route logs using the ``splunk`` log router, you need to specify a ``splunk-token`` and a ``splunk-url`` . When you use the ``awsfirelens`` log router to route logs to an AWS Service or AWS Partner Network destination for log storage and analytics, you can set the ``log-driver-buffer-limit`` option to limit the number of events that are buffered in memory, before being sent to the log router container. It can help to resolve potential log loss issue because high throughput might result in memory running out for the buffer inside of Docker. Other options you can specify when using ``awsfirelens`` to route logs depend on the destination. When you export logs to Amazon Data Firehose, you can specify the AWS Region with ``region`` and a name for the log stream with ``delivery_stream`` . When you export logs to Amazon Kinesis Data Streams, you can specify an AWS Region with ``region`` and a data stream name with ``stream`` . When you export logs to Amazon OpenSearch Service, you can specify options like ``Name`` , ``Host`` (OpenSearch Service endpoint without protocol), ``Port`` , ``Index`` , ``Type`` , ``Aws_auth`` , ``Aws_region`` , ``Suppress_Type_Name`` , and ``tls`` . For more information, see `Under the hood: FireLens for Amazon ECS Tasks <https://docs.aws.amazon.com/containers/under-the-hood-firelens-for-amazon-ecs-tasks/>`_ . When you export logs to Amazon S3, you can specify the bucket using the ``bucket`` option. You can also specify ``region`` , ``total_file_size`` , ``upload_timeout`` , and ``use_put_object`` as options. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: ``sudo docker version --format '{{.Server.APIVersion}}'``
             :param secret_options: The secrets to pass to the log configuration. For more information, see `Specifying sensitive data <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/specifying-sensitive-data.html>`_ in the *Amazon Elastic Container Service Developer Guide* .
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecs-taskdefinition-logconfiguration.html
@@ -16169,10 +16201,10 @@ class CfnTaskDefinition(
 
             If you use the ``non-blocking`` mode, the container's logs are instead stored in an in-memory intermediate buffer configured with the ``max-buffer-size`` option. This prevents the application from becoming unresponsive when logs cannot be sent. We recommend using this mode if you want to ensure service availability and are okay with some log loss. For more information, see `Preventing log loss with non-blocking mode in the ``awslogs`` container log driver <https://docs.aws.amazon.com/containers/preventing-log-loss-with-non-blocking-mode-in-the-awslogs-container-log-driver/>`_ .
 
-            You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* .
+            You can set a default ``mode`` for all containers in a specific AWS Region by using the ``defaultLogDriverMode`` account setting. If you don't specify the ``mode`` option or configure the account setting, Amazon ECS will default to the ``non-blocking`` mode. For more information about the account setting, see `Default log driver mode <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-account-settings.html#default-log-driver-mode>`_ in the *Amazon Elastic Container Service Developer Guide* .
             .. epigraph::
 
-               On June 25, 2025, Amazon ECS is changing the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following:
+               On June 25, 2025, Amazon ECS changed the default log driver mode from ``blocking`` to ``non-blocking`` to prioritize task availability over logging. To continue using the ``blocking`` mode after this change, do one of the following:
 
                - Set the ``mode`` option in your container definition's ``logConfiguration`` as ``blocking`` .
                - Set the ``defaultLogDriverMode`` account setting to ``blocking`` .
@@ -17707,7 +17739,7 @@ class CfnTaskDefinitionProps:
         :param ephemeral_storage: The ephemeral storage settings to use for tasks run with the task definition.
         :param execution_role_arn: The Amazon Resource Name (ARN) of the task execution role that grants the Amazon ECS container agent permission to make AWS API calls on your behalf. For informationabout the required IAM roles for Amazon ECS, see `IAM roles for Amazon ECS <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/security-ecs-iam-role-overview.html>`_ in the *Amazon Elastic Container Service Developer Guide* .
         :param family: The name of a family that this task definition is registered to. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add. .. epigraph:: To use revision numbers when you update a task definition, specify this property. If you don't specify a value, AWS CloudFormation generates a new task definition each time that you update it.
-        :param inference_accelerators: The Elastic Inference accelerators to use for the containers in the task.
+        :param inference_accelerators: (deprecated) The Elastic Inference accelerators to use for the containers in the task.
         :param ipc_mode: The IPC resource namespace to use for the containers in the task. The valid values are ``host`` , ``task`` , or ``none`` . If ``host`` is specified, then all containers within the tasks that specified the ``host`` IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If ``task`` is specified, all containers within the specified task share the same IPC resources. If ``none`` is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. If the ``host`` IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. If you are setting namespaced kernel parameters using ``systemControls`` for the containers in the task, the following will apply to your IPC resource namespace. For more information, see `System Controls <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_definition_parameters.html>`_ in the *Amazon Elastic Container Service Developer Guide* . - For tasks that use the ``host`` IPC mode, IPC namespace related ``systemControls`` are not supported. - For tasks that use the ``task`` IPC mode, IPC namespace related ``systemControls`` will apply to all containers within a task. .. epigraph:: This parameter is not supported for Windows containers or tasks run on AWS Fargate .
         :param memory: The amount (in MiB) of memory used by the task. If your tasks runs on Amazon EC2 instances, you must specify either a task-level memory value or a container-level memory value. This field is optional and any value can be used. If a task-level memory value is specified, the container-level memory value is optional. For more information regarding container-level memory and memory reservation, see `ContainerDefinition <https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ContainerDefinition.html>`_ . If your tasks runs on AWS Fargate , this field is required. You must use one of the following values. The value you choose determines your range of valid values for the ``cpu`` parameter. - 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available ``cpu`` values: 256 (.25 vCPU) - 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available ``cpu`` values: 512 (.5 vCPU) - 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available ``cpu`` values: 1024 (1 vCPU) - Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available ``cpu`` values: 2048 (2 vCPU) - Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available ``cpu`` values: 4096 (4 vCPU) - Between 16 GB and 60 GB in 4 GB increments - Available ``cpu`` values: 8192 (8 vCPU) This option requires Linux platform ``1.4.0`` or later. - Between 32GB and 120 GB in 8 GB increments - Available ``cpu`` values: 16384 (16 vCPU) This option requires Linux platform ``1.4.0`` or later.
         :param network_mode: The Docker networking mode to use for the containers in the task. The valid values are ``none`` , ``bridge`` , ``awsvpc`` , and ``host`` . If no network mode is specified, the default is ``bridge`` . For Amazon ECS tasks on Fargate, the ``awsvpc`` network mode is required. For Amazon ECS tasks on Amazon EC2 Linux instances, any network mode can be used. For Amazon ECS tasks on Amazon EC2 Windows instances, ``<default>`` or ``awsvpc`` can be used. If the network mode is set to ``none`` , you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The ``host`` and ``awsvpc`` network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the ``bridge`` mode. With the ``host`` and ``awsvpc`` network modes, exposed container ports are mapped directly to the corresponding host port (for the ``host`` network mode) or the attached elastic network interface port (for the ``awsvpc`` network mode), so you cannot take advantage of dynamic host port mappings. .. epigraph:: When using the ``host`` network mode, you should not run containers using the root user (UID 0). It is considered best practice to use a non-root user. If the network mode is ``awsvpc`` , the task is allocated an elastic network interface, and you must specify a `NetworkConfiguration <https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_NetworkConfiguration.html>`_ value when you create a service or run a task with the task definition. For more information, see `Task Networking <https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html>`_ in the *Amazon Elastic Container Service Developer Guide* . If the network mode is ``host`` , you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
@@ -18090,9 +18122,12 @@ class CfnTaskDefinitionProps:
     def inference_accelerators(
         self,
     ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, CfnTaskDefinition.InferenceAcceleratorProperty]]]]:
-        '''The Elastic Inference accelerators to use for the containers in the task.
+        '''(deprecated) The Elastic Inference accelerators to use for the containers in the task.
+
+        :deprecated: this property has been deprecated
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecs-taskdefinition.html#cfn-ecs-taskdefinition-inferenceaccelerators
+        :stability: deprecated
         '''
         result = self._values.get("inference_accelerators")
         return typing.cast(typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, CfnTaskDefinition.InferenceAcceleratorProperty]]]], result)

aws_cdk/aws_elasticloadbalancingv2/__init__.py

@@ -3858,7 +3858,7 @@ class CfnListener(
         :param default_actions: The actions for the default rule. You cannot define a condition for a default rule. To create additional rules for an Application Load Balancer, use `AWS::ElasticLoadBalancingV2::ListenerRule <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenerrule.html>`_ .
         :param load_balancer_arn: The Amazon Resource Name (ARN) of the load balancer.
         :param alpn_policy: [TLS listener] The name of the Application-Layer Protocol Negotiation (ALPN) policy.
-        :param certificates: The default SSL server certificate for a secure listener. You must provide exactly one certificate if the listener protocol is HTTPS or TLS. To create a certificate list for a secure listener, use `AWS::ElasticLoadBalancingV2::ListenerCertificate <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenercertificate.html>`_ .
+        :param certificates: The default SSL server certificate for a secure listener. You must provide exactly one certificate if the listener protocol is HTTPS or TLS. For an HTTPS listener, update requires some interruptions. For a TLS listener, update requires no interruption. To create a certificate list for a secure listener, use `AWS::ElasticLoadBalancingV2::ListenerCertificate <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenercertificate.html>`_ .
         :param listener_attributes: The listener attributes. Attributes that you do not modify retain their current values.
         :param mutual_authentication: The mutual authentication configuration information.
         :param port: The port on which the load balancer is listening. You can't specify a port for a Gateway Load Balancer.
@@ -5807,7 +5807,7 @@ class CfnListenerProps:
         :param default_actions: The actions for the default rule. You cannot define a condition for a default rule. To create additional rules for an Application Load Balancer, use `AWS::ElasticLoadBalancingV2::ListenerRule <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenerrule.html>`_ .
         :param load_balancer_arn: The Amazon Resource Name (ARN) of the load balancer.
         :param alpn_policy: [TLS listener] The name of the Application-Layer Protocol Negotiation (ALPN) policy.
-        :param certificates: The default SSL server certificate for a secure listener. You must provide exactly one certificate if the listener protocol is HTTPS or TLS. To create a certificate list for a secure listener, use `AWS::ElasticLoadBalancingV2::ListenerCertificate <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenercertificate.html>`_ .
+        :param certificates: The default SSL server certificate for a secure listener. You must provide exactly one certificate if the listener protocol is HTTPS or TLS. For an HTTPS listener, update requires some interruptions. For a TLS listener, update requires no interruption. To create a certificate list for a secure listener, use `AWS::ElasticLoadBalancingV2::ListenerCertificate <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenercertificate.html>`_ .
         :param listener_attributes: The listener attributes. Attributes that you do not modify retain their current values.
         :param mutual_authentication: The mutual authentication configuration information.
         :param port: The port on which the load balancer is listening. You can't specify a port for a Gateway Load Balancer.
@@ -5983,6 +5983,8 @@ class CfnListenerProps:
 
         You must provide exactly one certificate if the listener protocol is HTTPS or TLS.
 
+        For an HTTPS listener, update requires some interruptions. For a TLS listener, update requires no interruption.
+
         To create a certificate list for a secure listener, use `AWS::ElasticLoadBalancingV2::ListenerCertificate <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenercertificate.html>`_ .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listener.html#cfn-elasticloadbalancingv2-listener-certificates

aws_cdk/aws_emrserverless/__init__.py

@@ -104,6 +104,9 @@ class CfnApplication(
                 enabled=False,
                 idle_timeout_minutes=123
             ),
+            identity_center_configuration=emrserverless.CfnApplication.IdentityCenterConfigurationProperty(
+                identity_center_instance_arn="identityCenterInstanceArn"
+            ),
             image_configuration=emrserverless.CfnApplication.ImageConfigurationInputProperty(
                 image_uri="imageUri"
             ),
@@ -197,6 +200,7 @@ class CfnApplication(
         architecture: typing.Optional[builtins.str] = None,
         auto_start_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union["CfnApplication.AutoStartConfigurationProperty", typing.Dict[builtins.str, typing.Any]]]] = None,
         auto_stop_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union["CfnApplication.AutoStopConfigurationProperty", typing.Dict[builtins.str, typing.Any]]]] = None,
+        identity_center_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union["CfnApplication.IdentityCenterConfigurationProperty", typing.Dict[builtins.str, typing.Any]]]] = None,
         image_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union["CfnApplication.ImageConfigurationInputProperty", typing.Dict[builtins.str, typing.Any]]]] = None,
         initial_capacity: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Sequence[typing.Union[_IResolvable_da3f097b, typing.Union["CfnApplication.InitialCapacityConfigKeyValuePairProperty", typing.Dict[builtins.str, typing.Any]]]]]] = None,
         interactive_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union["CfnApplication.InteractiveConfigurationProperty", typing.Dict[builtins.str, typing.Any]]]] = None,
@@ -217,6 +221,7 @@ class CfnApplication(
         :param architecture: The CPU architecture of an application.
         :param auto_start_configuration: The configuration for an application to automatically start on job submission.
         :param auto_stop_configuration: The configuration for an application to automatically stop after a certain amount of time being idle.
+        :param identity_center_configuration: The IAM IdentityCenter configuration for trusted-identity-propagation on this application. Supported with release labels emr-7.8.0 and above.
         :param image_configuration: The image configuration applied to all worker types.
         :param initial_capacity: The initial capacity of the application.
         :param interactive_configuration: The interactive configuration object that enables the interactive use cases for an application.
@@ -239,6 +244,7 @@ class CfnApplication(
             architecture=architecture,
             auto_start_configuration=auto_start_configuration,
             auto_stop_configuration=auto_stop_configuration,
+            identity_center_configuration=identity_center_configuration,
             image_configuration=image_configuration,
             initial_capacity=initial_capacity,
             interactive_configuration=interactive_configuration,
@@ -388,6 +394,24 @@ class CfnApplication(
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
         jsii.set(self, "autoStopConfiguration", value) # pyright: ignore[reportArgumentType]
 
+    @builtins.property
+    @jsii.member(jsii_name="identityCenterConfiguration")
+    def identity_center_configuration(
+        self,
+    ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, "CfnApplication.IdentityCenterConfigurationProperty"]]:
+        '''The IAM IdentityCenter configuration for trusted-identity-propagation on this application.'''
+        return typing.cast(typing.Optional[typing.Union[_IResolvable_da3f097b, "CfnApplication.IdentityCenterConfigurationProperty"]], jsii.get(self, "identityCenterConfiguration"))
+
+    @identity_center_configuration.setter
+    def identity_center_configuration(
+        self,
+        value: typing.Optional[typing.Union[_IResolvable_da3f097b, "CfnApplication.IdentityCenterConfigurationProperty"]],
+    ) -> None:
+        if __debug__:
+            type_hints = typing.get_type_hints(_typecheckingstub__f1eed40ed1dc7d44d38be43c5f1ba67a1974e1b84a61945af44e0b33ee6910a0)
+            check_type(argname="argument value", value=value, expected_type=type_hints["value"])
+        jsii.set(self, "identityCenterConfiguration", value) # pyright: ignore[reportArgumentType]
+
     @builtins.property
     @jsii.member(jsii_name="imageConfiguration")
     def image_configuration(
@@ -950,6 +974,63 @@ class CfnApplication(
                 k + "=" + repr(v) for k, v in self._values.items()
             )
 
+    @jsii.data_type(
+        jsii_type="aws-cdk-lib.aws_emrserverless.CfnApplication.IdentityCenterConfigurationProperty",
+        jsii_struct_bases=[],
+        name_mapping={"identity_center_instance_arn": "identityCenterInstanceArn"},
+    )
+    class IdentityCenterConfigurationProperty:
+        def __init__(
+            self,
+            *,
+            identity_center_instance_arn: typing.Optional[builtins.str] = None,
+        ) -> None:
+            '''The IAM IdentityCenter configuration for trusted-identity-propagation on this application.
+
+            Supported with release labels emr-7.8.0 and above.
+
+            :param identity_center_instance_arn: The IAM IdentityCenter instance arn.
+
+            :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-emrserverless-application-identitycenterconfiguration.html
+            :exampleMetadata: fixture=_generated
+
+            Example::
+
+                # The code below shows an example of how to instantiate this type.
+                # The values are placeholders you should change.
+                from aws_cdk import aws_emrserverless as emrserverless
+                
+                identity_center_configuration_property = emrserverless.CfnApplication.IdentityCenterConfigurationProperty(
+                    identity_center_instance_arn="identityCenterInstanceArn"
+                )
+            '''
+            if __debug__:
+                type_hints = typing.get_type_hints(_typecheckingstub__e39791b3c0e4b2bc25ba2e752692f0e0b9015cac1be177ed585a88beab629a2e)
+                check_type(argname="argument identity_center_instance_arn", value=identity_center_instance_arn, expected_type=type_hints["identity_center_instance_arn"])
+            self._values: typing.Dict[builtins.str, typing.Any] = {}
+            if identity_center_instance_arn is not None:
+                self._values["identity_center_instance_arn"] = identity_center_instance_arn
+
+        @builtins.property
+        def identity_center_instance_arn(self) -> typing.Optional[builtins.str]:
+            '''The IAM IdentityCenter instance arn.
+
+            :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-emrserverless-application-identitycenterconfiguration.html#cfn-emrserverless-application-identitycenterconfiguration-identitycenterinstancearn
+            '''
+            result = self._values.get("identity_center_instance_arn")
+            return typing.cast(typing.Optional[builtins.str], result)
+
+        def __eq__(self, rhs: typing.Any) -> builtins.bool:
+            return isinstance(rhs, self.__class__) and rhs._values == self._values
+
+        def __ne__(self, rhs: typing.Any) -> builtins.bool:
+            return not (rhs == self)
+
+        def __repr__(self) -> str:
+            return "IdentityCenterConfigurationProperty(%s)" % ", ".join(
+                k + "=" + repr(v) for k, v in self._values.items()
+            )
+
     @jsii.data_type(
         jsii_type="aws-cdk-lib.aws_emrserverless.CfnApplication.ImageConfigurationInputProperty",
         jsii_struct_bases=[],
@@ -2077,6 +2158,7 @@ class CfnApplication(
         "architecture": "architecture",
         "auto_start_configuration": "autoStartConfiguration",
         "auto_stop_configuration": "autoStopConfiguration",
+        "identity_center_configuration": "identityCenterConfiguration",
         "image_configuration": "imageConfiguration",
         "initial_capacity": "initialCapacity",
         "interactive_configuration": "interactiveConfiguration",
@@ -2099,6 +2181,7 @@ class CfnApplicationProps:
         architecture: typing.Optional[builtins.str] = None,
         auto_start_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.AutoStartConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
         auto_stop_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.AutoStopConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
+        identity_center_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.IdentityCenterConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
         image_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.ImageConfigurationInputProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
         initial_capacity: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Sequence[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.InitialCapacityConfigKeyValuePairProperty, typing.Dict[builtins.str, typing.Any]]]]]] = None,
         interactive_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.InteractiveConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
@@ -2118,6 +2201,7 @@ class CfnApplicationProps:
         :param architecture: The CPU architecture of an application.
         :param auto_start_configuration: The configuration for an application to automatically start on job submission.
         :param auto_stop_configuration: The configuration for an application to automatically stop after a certain amount of time being idle.
+        :param identity_center_configuration: The IAM IdentityCenter configuration for trusted-identity-propagation on this application. Supported with release labels emr-7.8.0 and above.
         :param image_configuration: The image configuration applied to all worker types.
         :param initial_capacity: The initial capacity of the application.
         :param interactive_configuration: The interactive configuration object that enables the interactive use cases for an application.
@@ -2154,6 +2238,9 @@ class CfnApplicationProps:
                     enabled=False,
                     idle_timeout_minutes=123
                 ),
+                identity_center_configuration=emrserverless.CfnApplication.IdentityCenterConfigurationProperty(
+                    identity_center_instance_arn="identityCenterInstanceArn"
+                ),
                 image_configuration=emrserverless.CfnApplication.ImageConfigurationInputProperty(
                     image_uri="imageUri"
                 ),
@@ -2243,6 +2330,7 @@ class CfnApplicationProps:
             check_type(argname="argument architecture", value=architecture, expected_type=type_hints["architecture"])
             check_type(argname="argument auto_start_configuration", value=auto_start_configuration, expected_type=type_hints["auto_start_configuration"])
             check_type(argname="argument auto_stop_configuration", value=auto_stop_configuration, expected_type=type_hints["auto_stop_configuration"])
+            check_type(argname="argument identity_center_configuration", value=identity_center_configuration, expected_type=type_hints["identity_center_configuration"])
             check_type(argname="argument image_configuration", value=image_configuration, expected_type=type_hints["image_configuration"])
             check_type(argname="argument initial_capacity", value=initial_capacity, expected_type=type_hints["initial_capacity"])
             check_type(argname="argument interactive_configuration", value=interactive_configuration, expected_type=type_hints["interactive_configuration"])
@@ -2264,6 +2352,8 @@ class CfnApplicationProps:
             self._values["auto_start_configuration"] = auto_start_configuration
         if auto_stop_configuration is not None:
             self._values["auto_stop_configuration"] = auto_stop_configuration
+        if identity_center_configuration is not None:
+            self._values["identity_center_configuration"] = identity_center_configuration
         if image_configuration is not None:
             self._values["image_configuration"] = image_configuration
         if initial_capacity is not None:
@@ -2338,6 +2428,19 @@ class CfnApplicationProps:
         result = self._values.get("auto_stop_configuration")
         return typing.cast(typing.Optional[typing.Union[_IResolvable_da3f097b, CfnApplication.AutoStopConfigurationProperty]], result)
 
+    @builtins.property
+    def identity_center_configuration(
+        self,
+    ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, CfnApplication.IdentityCenterConfigurationProperty]]:
+        '''The IAM IdentityCenter configuration for trusted-identity-propagation on this application.
+
+        Supported with release labels emr-7.8.0 and above.
+
+        :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-emrserverless-application.html#cfn-emrserverless-application-identitycenterconfiguration
+        '''
+        result = self._values.get("identity_center_configuration")
+        return typing.cast(typing.Optional[typing.Union[_IResolvable_da3f097b, CfnApplication.IdentityCenterConfigurationProperty]], result)
+
     @builtins.property
     def image_configuration(
         self,
@@ -2489,6 +2592,7 @@ def _typecheckingstub__73910249d55cbd2983a3ea1bb4666acedb0e3e84df9686bbdeecd191b
     architecture: typing.Optional[builtins.str] = None,
     auto_start_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.AutoStartConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
     auto_stop_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.AutoStopConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
+    identity_center_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.IdentityCenterConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
     image_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.ImageConfigurationInputProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
     initial_capacity: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Sequence[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.InitialCapacityConfigKeyValuePairProperty, typing.Dict[builtins.str, typing.Any]]]]]] = None,
     interactive_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.InteractiveConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
@@ -2546,6 +2650,12 @@ def _typecheckingstub__6f1b3d83107f5e408234e2bfc84b1e4ecd5f468b8f46ba51ddf116c1b
     """Type checking stubs"""
     pass
 
+def _typecheckingstub__f1eed40ed1dc7d44d38be43c5f1ba67a1974e1b84a61945af44e0b33ee6910a0(
+    value: typing.Optional[typing.Union[_IResolvable_da3f097b, CfnApplication.IdentityCenterConfigurationProperty]],
+) -> None:
+    """Type checking stubs"""
+    pass
+
 def _typecheckingstub__368a96aa7c6ff916676fe29b5a922fae846a89a5edbb8c71b20a5d60107bff71(
     value: typing.Optional[typing.Union[_IResolvable_da3f097b, CfnApplication.ImageConfigurationInputProperty]],
 ) -> None:
@@ -2647,6 +2757,13 @@ def _typecheckingstub__f6631f05a0f985523b64829ba85bb2686c8aecd114d8a1c04c994338e
     """Type checking stubs"""
     pass
 
+def _typecheckingstub__e39791b3c0e4b2bc25ba2e752692f0e0b9015cac1be177ed585a88beab629a2e(
+    *,
+    identity_center_instance_arn: typing.Optional[builtins.str] = None,
+) -> None:
+    """Type checking stubs"""
+    pass
+
 def _typecheckingstub__f60138497ea02d9962f5b33612a58874538452fcad71efafe327c8dd4b46ee62(
     *,
     image_uri: typing.Optional[builtins.str] = None,
@@ -2768,6 +2885,7 @@ def _typecheckingstub__e3151e77334ffa97e03663b371e17d90f7842dc4da33dee36252fd84d
     architecture: typing.Optional[builtins.str] = None,
     auto_start_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.AutoStartConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
     auto_stop_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.AutoStopConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
+    identity_center_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.IdentityCenterConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
     image_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.ImageConfigurationInputProperty, typing.Dict[builtins.str, typing.Any]]]] = None,
     initial_capacity: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Sequence[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.InitialCapacityConfigKeyValuePairProperty, typing.Dict[builtins.str, typing.Any]]]]]] = None,
     interactive_configuration: typing.Optional[typing.Union[_IResolvable_da3f097b, typing.Union[CfnApplication.InteractiveConfigurationProperty, typing.Dict[builtins.str, typing.Any]]]] = None,