aws-cdk-lib 2.182.0__py3-none-any.whl → 2.183.0__py3-none-any.whl

aws_cdk/aws_iotfleetwise/__init__.py

@@ -2744,7 +2744,8 @@ class CfnDecoderManifest(
                     start_bit="startBit",
         
                     # the properties below are optional
-                    name="name"
+                    name="name",
+                    signal_value_type="signalValueType"
                 ),
                 obd_signal=iotfleetwise.CfnDecoderManifest.ObdSignalProperty(
                     byte_length="byteLength",
@@ -2757,7 +2758,9 @@ class CfnDecoderManifest(
         
                     # the properties below are optional
                     bit_mask_length="bitMaskLength",
-                    bit_right_shift="bitRightShift"
+                    bit_right_shift="bitRightShift",
+                    is_signed="isSigned",
+                    signal_value_type="signalValueType"
                 )
             )],
             status="status",
@@ -3238,7 +3241,8 @@ class CfnDecoderManifest(
                         start_bit="startBit",
                 
                         # the properties below are optional
-                        name="name"
+                        name="name",
+                        signal_value_type="signalValueType"
                     ),
                     fully_qualified_name="fullyQualifiedName",
                     interface_id="interfaceId",
@@ -3325,6 +3329,7 @@ class CfnDecoderManifest(
             "offset": "offset",
             "start_bit": "startBit",
             "name": "name",
+            "signal_value_type": "signalValueType",
         },
     )
     class CanSignalProperty:
@@ -3339,6 +3344,7 @@ class CfnDecoderManifest(
             offset: builtins.str,
             start_bit: builtins.str,
             name: typing.Optional[builtins.str] = None,
+            signal_value_type: typing.Optional[builtins.str] = None,
         ) -> None:
             '''Information about a single controller area network (CAN) signal and the messages it receives and transmits.
 
@@ -3350,6 +3356,7 @@ class CfnDecoderManifest(
             :param offset: The offset used to calculate the signal value. Combined with factor, the calculation is ``value = raw_value * factor + offset`` .
             :param start_bit: Indicates the beginning of the CAN message.
             :param name: The name of the signal.
+            :param signal_value_type: 
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotfleetwise-decodermanifest-cansignal.html
             :exampleMetadata: fixture=_generated
@@ -3370,7 +3377,8 @@ class CfnDecoderManifest(
                     start_bit="startBit",
                 
                     # the properties below are optional
-                    name="name"
+                    name="name",
+                    signal_value_type="signalValueType"
                 )
             '''
             if __debug__:
@@ -3383,6 +3391,7 @@ class CfnDecoderManifest(
                 check_type(argname="argument offset", value=offset, expected_type=type_hints["offset"])
                 check_type(argname="argument start_bit", value=start_bit, expected_type=type_hints["start_bit"])
                 check_type(argname="argument name", value=name, expected_type=type_hints["name"])
+                check_type(argname="argument signal_value_type", value=signal_value_type, expected_type=type_hints["signal_value_type"])
             self._values: typing.Dict[builtins.str, typing.Any] = {
                 "factor": factor,
                 "is_big_endian": is_big_endian,
@@ -3394,6 +3403,8 @@ class CfnDecoderManifest(
             }
             if name is not None:
                 self._values["name"] = name
+            if signal_value_type is not None:
+                self._values["signal_value_type"] = signal_value_type
 
         @builtins.property
         def factor(self) -> builtins.str:
@@ -3476,6 +3487,14 @@ class CfnDecoderManifest(
             result = self._values.get("name")
             return typing.cast(typing.Optional[builtins.str], result)
 
+        @builtins.property
+        def signal_value_type(self) -> typing.Optional[builtins.str]:
+            '''
+            :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotfleetwise-decodermanifest-cansignal.html#cfn-iotfleetwise-decodermanifest-cansignal-signalvaluetype
+            '''
+            result = self._values.get("signal_value_type")
+            return typing.cast(typing.Optional[builtins.str], result)
+
         def __eq__(self, rhs: typing.Any) -> builtins.bool:
             return isinstance(rhs, self.__class__) and rhs._values == self._values
 
@@ -3920,7 +3939,9 @@ class CfnDecoderManifest(
                 
                         # the properties below are optional
                         bit_mask_length="bitMaskLength",
-                        bit_right_shift="bitRightShift"
+                        bit_right_shift="bitRightShift",
+                        is_signed="isSigned",
+                        signal_value_type="signalValueType"
                     ),
                     type="type"
                 )
@@ -4006,6 +4027,8 @@ class CfnDecoderManifest(
             "start_byte": "startByte",
             "bit_mask_length": "bitMaskLength",
             "bit_right_shift": "bitRightShift",
+            "is_signed": "isSigned",
+            "signal_value_type": "signalValueType",
         },
     )
     class ObdSignalProperty:
@@ -4021,6 +4044,8 @@ class CfnDecoderManifest(
             start_byte: builtins.str,
             bit_mask_length: typing.Optional[builtins.str] = None,
             bit_right_shift: typing.Optional[builtins.str] = None,
+            is_signed: typing.Optional[typing.Union[builtins.str, builtins.bool, _IResolvable_da3f097b]] = None,
+            signal_value_type: typing.Optional[builtins.str] = None,
         ) -> None:
             '''Information about signal messages using the on-board diagnostics (OBD) II protocol in a vehicle.
 
@@ -4033,6 +4058,8 @@ class CfnDecoderManifest(
             :param start_byte: Indicates the beginning of the message.
             :param bit_mask_length: The number of bits to mask in a message.
             :param bit_right_shift: The number of positions to shift bits in the message.
+            :param is_signed: 
+            :param signal_value_type: 
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotfleetwise-decodermanifest-obdsignal.html
             :exampleMetadata: fixture=_generated
@@ -4054,7 +4081,9 @@ class CfnDecoderManifest(
                 
                     # the properties below are optional
                     bit_mask_length="bitMaskLength",
-                    bit_right_shift="bitRightShift"
+                    bit_right_shift="bitRightShift",
+                    is_signed="isSigned",
+                    signal_value_type="signalValueType"
                 )
             '''
             if __debug__:
@@ -4068,6 +4097,8 @@ class CfnDecoderManifest(
                 check_type(argname="argument start_byte", value=start_byte, expected_type=type_hints["start_byte"])
                 check_type(argname="argument bit_mask_length", value=bit_mask_length, expected_type=type_hints["bit_mask_length"])
                 check_type(argname="argument bit_right_shift", value=bit_right_shift, expected_type=type_hints["bit_right_shift"])
+                check_type(argname="argument is_signed", value=is_signed, expected_type=type_hints["is_signed"])
+                check_type(argname="argument signal_value_type", value=signal_value_type, expected_type=type_hints["signal_value_type"])
             self._values: typing.Dict[builtins.str, typing.Any] = {
                 "byte_length": byte_length,
                 "offset": offset,
@@ -4081,6 +4112,10 @@ class CfnDecoderManifest(
                 self._values["bit_mask_length"] = bit_mask_length
             if bit_right_shift is not None:
                 self._values["bit_right_shift"] = bit_right_shift
+            if is_signed is not None:
+                self._values["is_signed"] = is_signed
+            if signal_value_type is not None:
+                self._values["signal_value_type"] = signal_value_type
 
         @builtins.property
         def byte_length(self) -> builtins.str:
@@ -4172,6 +4207,24 @@ class CfnDecoderManifest(
             result = self._values.get("bit_right_shift")
             return typing.cast(typing.Optional[builtins.str], result)
 
+        @builtins.property
+        def is_signed(
+            self,
+        ) -> typing.Optional[typing.Union[builtins.str, builtins.bool, _IResolvable_da3f097b]]:
+            '''
+            :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotfleetwise-decodermanifest-obdsignal.html#cfn-iotfleetwise-decodermanifest-obdsignal-issigned
+            '''
+            result = self._values.get("is_signed")
+            return typing.cast(typing.Optional[typing.Union[builtins.str, builtins.bool, _IResolvable_da3f097b]], result)
+
+        @builtins.property
+        def signal_value_type(self) -> typing.Optional[builtins.str]:
+            '''
+            :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotfleetwise-decodermanifest-obdsignal.html#cfn-iotfleetwise-decodermanifest-obdsignal-signalvaluetype
+            '''
+            result = self._values.get("signal_value_type")
+            return typing.cast(typing.Optional[builtins.str], result)
+
         def __eq__(self, rhs: typing.Any) -> builtins.bool:
             return isinstance(rhs, self.__class__) and rhs._values == self._values
 
@@ -4237,7 +4290,8 @@ class CfnDecoderManifest(
                         start_bit="startBit",
                 
                         # the properties below are optional
-                        name="name"
+                        name="name",
+                        signal_value_type="signalValueType"
                     ),
                     obd_signal=iotfleetwise.CfnDecoderManifest.ObdSignalProperty(
                         byte_length="byteLength",
@@ -4250,7 +4304,9 @@ class CfnDecoderManifest(
                 
                         # the properties below are optional
                         bit_mask_length="bitMaskLength",
-                        bit_right_shift="bitRightShift"
+                        bit_right_shift="bitRightShift",
+                        is_signed="isSigned",
+                        signal_value_type="signalValueType"
                     )
                 )
             '''
@@ -4424,7 +4480,8 @@ class CfnDecoderManifestProps:
                         start_bit="startBit",
             
                         # the properties below are optional
-                        name="name"
+                        name="name",
+                        signal_value_type="signalValueType"
                     ),
                     obd_signal=iotfleetwise.CfnDecoderManifest.ObdSignalProperty(
                         byte_length="byteLength",
@@ -4437,7 +4494,9 @@ class CfnDecoderManifestProps:
             
                         # the properties below are optional
                         bit_mask_length="bitMaskLength",
-                        bit_right_shift="bitRightShift"
+                        bit_right_shift="bitRightShift",
+                        is_signed="isSigned",
+                        signal_value_type="signalValueType"
                     )
                 )],
                 status="status",
@@ -8242,6 +8301,7 @@ def _typecheckingstub__d1fdd86137a92797754860d3b8da115496d862a2f95c8e39c08a70fdf
     offset: builtins.str,
     start_bit: builtins.str,
     name: typing.Optional[builtins.str] = None,
+    signal_value_type: typing.Optional[builtins.str] = None,
 ) -> None:
     """Type checking stubs"""
     pass
@@ -8299,6 +8359,8 @@ def _typecheckingstub__ccb776ce607aa563ef4bc105956ab186267e45066ee492c162a455570
     start_byte: builtins.str,
     bit_mask_length: typing.Optional[builtins.str] = None,
     bit_right_shift: typing.Optional[builtins.str] = None,
+    is_signed: typing.Optional[typing.Union[builtins.str, builtins.bool, _IResolvable_da3f097b]] = None,
+    signal_value_type: typing.Optional[builtins.str] = None,
 ) -> None:
     """Type checking stubs"""
     pass

aws_cdk/aws_iotsitewise/__init__.py

@@ -4226,7 +4226,7 @@ class CfnGateway(
         :param gateway_name: A unique name for the gateway.
         :param gateway_platform: The gateway's platform. You can only specify one platform in a gateway.
         :param gateway_capability_summaries: A list of gateway capability summaries that each contain a namespace and status. Each gateway capability defines data sources for the gateway. To retrieve a capability configuration's definition, use `DescribeGatewayCapabilityConfiguration <https://docs.aws.amazon.com/iot-sitewise/latest/APIReference/API_DescribeGatewayCapabilityConfiguration.html>`_ .
-        :param gateway_version: The version of the gateway you want to create.
+        :param gateway_version: The version of the gateway. A value of ``3`` indicates an MQTT-enabled, V3 gateway, while ``2`` indicates a Classic streams, V2 gateway.
         :param tags: A list of key-value pairs that contain metadata for the gateway. For more information, see `Tagging your AWS IoT SiteWise resources <https://docs.aws.amazon.com/iot-sitewise/latest/userguide/tag-resources.html>`_ in the *AWS IoT SiteWise User Guide* .
         '''
         if __debug__:
@@ -4345,7 +4345,7 @@ class CfnGateway(
     @builtins.property
     @jsii.member(jsii_name="gatewayVersion")
     def gateway_version(self) -> typing.Optional[builtins.str]:
-        '''The version of the gateway you want to create.'''
+        '''The version of the gateway.'''
         return typing.cast(typing.Optional[builtins.str], jsii.get(self, "gatewayVersion"))
 
     @gateway_version.setter
@@ -4469,7 +4469,7 @@ class CfnGateway(
 
             :param greengrass: 
             :param greengrass_v2: A gateway that runs on AWS IoT Greengrass V2 .
-            :param siemens_ie: A AWS IoT SiteWise Edge gateway that runs on a Siemens Industrial Edge Device.
+            :param siemens_ie: An AWS IoT SiteWise Edge gateway that runs on a Siemens Industrial Edge Device.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-gateway-gatewayplatform.html
             :exampleMetadata: fixture=_generated
@@ -4533,7 +4533,7 @@ class CfnGateway(
         def siemens_ie(
             self,
         ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, "CfnGateway.SiemensIEProperty"]]:
-            '''A AWS IoT SiteWise Edge gateway that runs on a Siemens Industrial Edge Device.
+            '''An AWS IoT SiteWise Edge gateway that runs on a Siemens Industrial Edge Device.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-gateway-gatewayplatform.html#cfn-iotsitewise-gateway-gatewayplatform-siemensie
             '''
@@ -4758,7 +4758,7 @@ class CfnGatewayProps:
         :param gateway_name: A unique name for the gateway.
         :param gateway_platform: The gateway's platform. You can only specify one platform in a gateway.
         :param gateway_capability_summaries: A list of gateway capability summaries that each contain a namespace and status. Each gateway capability defines data sources for the gateway. To retrieve a capability configuration's definition, use `DescribeGatewayCapabilityConfiguration <https://docs.aws.amazon.com/iot-sitewise/latest/APIReference/API_DescribeGatewayCapabilityConfiguration.html>`_ .
-        :param gateway_version: The version of the gateway you want to create.
+        :param gateway_version: The version of the gateway. A value of ``3`` indicates an MQTT-enabled, V3 gateway, while ``2`` indicates a Classic streams, V2 gateway.
         :param tags: A list of key-value pairs that contain metadata for the gateway. For more information, see `Tagging your AWS IoT SiteWise resources <https://docs.aws.amazon.com/iot-sitewise/latest/userguide/tag-resources.html>`_ in the *AWS IoT SiteWise User Guide* .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotsitewise-gateway.html
@@ -4858,7 +4858,9 @@ class CfnGatewayProps:
 
     @builtins.property
     def gateway_version(self) -> typing.Optional[builtins.str]:
-        '''The version of the gateway you want to create.
+        '''The version of the gateway.
+
+        A value of ``3`` indicates an MQTT-enabled, V3 gateway, while ``2`` indicates a Classic streams, V2 gateway.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotsitewise-gateway.html#cfn-iotsitewise-gateway-gatewayversion
         '''
@@ -5286,7 +5288,7 @@ class CfnPortal(
         def __init__(self, *, portal_tools: typing.Sequence[builtins.str]) -> None:
             '''Container associated a certain PortalType.
 
-            :param portal_tools: List of enabled Tools for a certain portal.
+            :param portal_tools: The array of tools associated with the specified portal type. The possible values are ``ASSISTANT`` and ``DASHBOARD`` .
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-portal-portaltypeentry.html
             :exampleMetadata: fixture=_generated
@@ -5310,7 +5312,9 @@ class CfnPortal(
 
         @builtins.property
         def portal_tools(self) -> typing.List[builtins.str]:
-            '''List of enabled Tools for a certain portal.
+            '''The array of tools associated with the specified portal type.
+
+            The possible values are ``ASSISTANT`` and ``DASHBOARD`` .
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-portal-portaltypeentry.html#cfn-iotsitewise-portal-portaltypeentry-portaltools
             '''

aws_cdk/aws_kafkaconnect/__init__.py

@@ -195,7 +195,7 @@ class CfnConnector(
         :param id: Construct identifier for this resource (unique in its scope).
         :param capacity: The connector's compute capacity settings.
         :param connector_configuration: The configuration of the connector.
-        :param connector_name: The name of the connector.
+        :param connector_name: The name of the connector. The connector name must be unique and can include up to 128 characters. Valid characters you can include in a connector name are: a-z, A-Z, 0-9, and -.
         :param kafka_cluster: The details of the Apache Kafka cluster to which the connector is connected.
         :param kafka_cluster_client_authentication: The type of client authentication used to connect to the Apache Kafka cluster. The value is NONE when no client authentication is used.
         :param kafka_cluster_encryption_in_transit: Details of encryption in transit to the Apache Kafka cluster.
@@ -1883,7 +1883,7 @@ class CfnConnectorProps:
 
         :param capacity: The connector's compute capacity settings.
         :param connector_configuration: The configuration of the connector.
-        :param connector_name: The name of the connector.
+        :param connector_name: The name of the connector. The connector name must be unique and can include up to 128 characters. Valid characters you can include in a connector name are: a-z, A-Z, 0-9, and -.
         :param kafka_cluster: The details of the Apache Kafka cluster to which the connector is connected.
         :param kafka_cluster_client_authentication: The type of client authentication used to connect to the Apache Kafka cluster. The value is NONE when no client authentication is used.
         :param kafka_cluster_encryption_in_transit: Details of encryption in transit to the Apache Kafka cluster.
@@ -2050,6 +2050,8 @@ class CfnConnectorProps:
     def connector_name(self) -> builtins.str:
         '''The name of the connector.
 
+        The connector name must be unique and can include up to 128 characters. Valid characters you can include in a connector name are: a-z, A-Z, 0-9, and -.
+
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-kafkaconnect-connector.html#cfn-kafkaconnect-connector-connectorname
         '''
         result = self._values.get("connector_name")

aws_cdk/aws_lambda/__init__.py

@@ -23022,6 +23022,15 @@ class SourceAccessConfigurationType(
         '''The Secrets Manager ARN of your secret key containing the root CA certificate (X.509 PEM) used for TLS encryption of your Apache Kafka brokers.'''
         return typing.cast("SourceAccessConfigurationType", jsii.sget(cls, "SERVER_ROOT_CA_CERTIFICATE"))
 
+    @jsii.python.classproperty
+    @jsii.member(jsii_name="VIRTUAL_HOST")
+    def VIRTUAL_HOST(cls) -> "SourceAccessConfigurationType":
+        '''The name of the virtual host in your RabbitMQ broker.
+
+        Lambda uses this RabbitMQ host as the event source.
+        '''
+        return typing.cast("SourceAccessConfigurationType", jsii.sget(cls, "VIRTUAL_HOST"))
+
     @jsii.python.classproperty
     @jsii.member(jsii_name="VPC_SECURITY_GROUP")
     def VPC_SECURITY_GROUP(cls) -> "SourceAccessConfigurationType":

aws_cdk/aws_logs/__init__.py

@@ -456,6 +456,28 @@ logs.LogGroup(self, "LogGroupLambda",
 )
 ```
 
+## Field Index Policies
+
+Creates or updates a field index policy for the specified log group. You can use field index policies to create field indexes on fields found in log events in the log group. Creating field indexes lowers the costs for CloudWatch Logs Insights queries that reference those field indexes, because these queries attempt to skip the processing of log events that are known to not match the indexed field. Good fields to index are fields that you often need to query for and fields that have high cardinality of values.
+
+For more information, see [Create field indexes to improve query performance and reduce costs](https://docs.aws.amazon.com/AmazonCloudWatch/latest/logs/CloudWatchLogs-Field-Indexing.html).
+
+Only log groups in the Standard log class support field index policies.
+Currently, this array supports only one field index policy object.
+
+Example:
+
+```python
+field_index_policy = logs.FieldIndexPolicy(
+    fields=["Operation", "RequestId"]
+)
+
+logs.LogGroup(self, "LogGroup",
+    log_group_name="cdkIntegLogGroup",
+    field_index_policies=[field_index_policy]
+)
+```
+
 ## Notes
 
 Be aware that Log Group ARNs will always have the string `:*` appended to
@@ -9558,6 +9580,88 @@ class Distribution(enum.Enum):
     '''Log events are distributed across the log destinations randomly.'''
 
 
+class FieldIndexPolicy(
+    metaclass=jsii.JSIIMeta,
+    jsii_type="aws-cdk-lib.aws_logs.FieldIndexPolicy",
+):
+    '''Creates a field index policy for CloudWatch Logs log groups.
+
+    :exampleMetadata: infused
+
+    Example::
+
+        field_index_policy = logs.FieldIndexPolicy(
+            fields=["Operation", "RequestId"]
+        )
+        
+        logs.LogGroup(self, "LogGroup",
+            log_group_name="cdkIntegLogGroup",
+            field_index_policies=[field_index_policy]
+        )
+    '''
+
+    def __init__(self, *, fields: typing.Sequence[builtins.str]) -> None:
+        '''
+        :param fields: List of fields to index in log events. Default: no fields
+        '''
+        props = FieldIndexPolicyProps(fields=fields)
+
+        jsii.create(self.__class__, self, [props])
+
+
+@jsii.data_type(
+    jsii_type="aws-cdk-lib.aws_logs.FieldIndexPolicyProps",
+    jsii_struct_bases=[],
+    name_mapping={"fields": "fields"},
+)
+class FieldIndexPolicyProps:
+    def __init__(self, *, fields: typing.Sequence[builtins.str]) -> None:
+        '''Properties for creating field index policies.
+
+        :param fields: List of fields to index in log events. Default: no fields
+
+        :exampleMetadata: infused
+
+        Example::
+
+            field_index_policy = logs.FieldIndexPolicy(
+                fields=["Operation", "RequestId"]
+            )
+            
+            logs.LogGroup(self, "LogGroup",
+                log_group_name="cdkIntegLogGroup",
+                field_index_policies=[field_index_policy]
+            )
+        '''
+        if __debug__:
+            type_hints = typing.get_type_hints(_typecheckingstub__8587c6606bf8df6db1fab55d5f7ea689b5960f088bf6825593078b791719378c)
+            check_type(argname="argument fields", value=fields, expected_type=type_hints["fields"])
+        self._values: typing.Dict[builtins.str, typing.Any] = {
+            "fields": fields,
+        }
+
+    @builtins.property
+    def fields(self) -> typing.List[builtins.str]:
+        '''List of fields to index in log events.
+
+        :default: no fields
+        '''
+        result = self._values.get("fields")
+        assert result is not None, "Required property 'fields' is missing"
+        return typing.cast(typing.List[builtins.str], result)
+
+    def __eq__(self, rhs: typing.Any) -> builtins.bool:
+        return isinstance(rhs, self.__class__) and rhs._values == self._values
+
+    def __ne__(self, rhs: typing.Any) -> builtins.bool:
+        return not (rhs == self)
+
+    def __repr__(self) -> str:
+        return "FieldIndexPolicyProps(%s)" % ", ".join(
+            k + "=" + repr(v) for k, v in self._values.items()
+        )
+
+
 class FilterPattern(
     metaclass=jsii.JSIIMeta,
     jsii_type="aws-cdk-lib.aws_logs.FilterPattern",
@@ -10613,6 +10717,7 @@ class LogGroup(
         *,
         data_protection_policy: typing.Optional[DataProtectionPolicy] = None,
         encryption_key: typing.Optional[_IKey_5f11635f] = None,
+        field_index_policies: typing.Optional[typing.Sequence[FieldIndexPolicy]] = None,
         log_group_class: typing.Optional["LogGroupClass"] = None,
         log_group_name: typing.Optional[builtins.str] = None,
         removal_policy: typing.Optional[_RemovalPolicy_9f93c814] = None,
@@ -10623,6 +10728,7 @@ class LogGroup(
         :param id: -
         :param data_protection_policy: Data Protection Policy for this log group. Default: - no data protection policy
         :param encryption_key: The KMS customer managed key to encrypt the log group with. Default: Server-side encryption managed by the CloudWatch Logs service
+        :param field_index_policies: Field Index Policies for this log group. Default: - no field index policies for this log group.
         :param log_group_class: The class of the log group. Possible values are: STANDARD and INFREQUENT_ACCESS. INFREQUENT_ACCESS class provides customers a cost-effective way to consolidate logs which supports querying using Logs Insights. The logGroupClass property cannot be changed once the log group is created. Default: LogGroupClass.STANDARD
         :param log_group_name: Name of the log group. Default: Automatically generated
         :param removal_policy: Determine the removal policy of this log group. Normally you want to retain the log group so you can diagnose issues from logs even after a deployment that no longer includes the log group. In that case, use the normal date-based retention policy to age out your logs. Default: RemovalPolicy.Retain
@@ -10635,6 +10741,7 @@ class LogGroup(
         props = LogGroupProps(
             data_protection_policy=data_protection_policy,
             encryption_key=encryption_key,
+            field_index_policies=field_index_policies,
             log_group_class=log_group_class,
             log_group_name=log_group_name,
             removal_policy=removal_policy,
@@ -11081,6 +11188,7 @@ class LogGroupClass(enum.Enum):
     name_mapping={
         "data_protection_policy": "dataProtectionPolicy",
         "encryption_key": "encryptionKey",
+        "field_index_policies": "fieldIndexPolicies",
         "log_group_class": "logGroupClass",
         "log_group_name": "logGroupName",
         "removal_policy": "removalPolicy",
@@ -11093,6 +11201,7 @@ class LogGroupProps:
         *,
         data_protection_policy: typing.Optional[DataProtectionPolicy] = None,
         encryption_key: typing.Optional[_IKey_5f11635f] = None,
+        field_index_policies: typing.Optional[typing.Sequence[FieldIndexPolicy]] = None,
         log_group_class: typing.Optional[LogGroupClass] = None,
         log_group_name: typing.Optional[builtins.str] = None,
         removal_policy: typing.Optional[_RemovalPolicy_9f93c814] = None,
@@ -11102,6 +11211,7 @@ class LogGroupProps:
 
         :param data_protection_policy: Data Protection Policy for this log group. Default: - no data protection policy
         :param encryption_key: The KMS customer managed key to encrypt the log group with. Default: Server-side encryption managed by the CloudWatch Logs service
+        :param field_index_policies: Field Index Policies for this log group. Default: - no field index policies for this log group.
         :param log_group_class: The class of the log group. Possible values are: STANDARD and INFREQUENT_ACCESS. INFREQUENT_ACCESS class provides customers a cost-effective way to consolidate logs which supports querying using Logs Insights. The logGroupClass property cannot be changed once the log group is created. Default: LogGroupClass.STANDARD
         :param log_group_name: Name of the log group. Default: Automatically generated
         :param removal_policy: Determine the removal policy of this log group. Normally you want to retain the log group so you can diagnose issues from logs even after a deployment that no longer includes the log group. In that case, use the normal date-based retention policy to age out your logs. Default: RemovalPolicy.Retain
@@ -11147,6 +11257,7 @@ class LogGroupProps:
             type_hints = typing.get_type_hints(_typecheckingstub__df51a93f7809d59dd37d78a60967e0071dab4876ea1cd5ecd658ac3c8eae1320)
             check_type(argname="argument data_protection_policy", value=data_protection_policy, expected_type=type_hints["data_protection_policy"])
             check_type(argname="argument encryption_key", value=encryption_key, expected_type=type_hints["encryption_key"])
+            check_type(argname="argument field_index_policies", value=field_index_policies, expected_type=type_hints["field_index_policies"])
             check_type(argname="argument log_group_class", value=log_group_class, expected_type=type_hints["log_group_class"])
             check_type(argname="argument log_group_name", value=log_group_name, expected_type=type_hints["log_group_name"])
             check_type(argname="argument removal_policy", value=removal_policy, expected_type=type_hints["removal_policy"])
@@ -11156,6 +11267,8 @@ class LogGroupProps:
             self._values["data_protection_policy"] = data_protection_policy
         if encryption_key is not None:
             self._values["encryption_key"] = encryption_key
+        if field_index_policies is not None:
+            self._values["field_index_policies"] = field_index_policies
         if log_group_class is not None:
             self._values["log_group_class"] = log_group_class
         if log_group_name is not None:
@@ -11183,6 +11296,15 @@ class LogGroupProps:
         result = self._values.get("encryption_key")
         return typing.cast(typing.Optional[_IKey_5f11635f], result)
 
+    @builtins.property
+    def field_index_policies(self) -> typing.Optional[typing.List[FieldIndexPolicy]]:
+        '''Field Index Policies for this log group.
+
+        :default: - no field index policies for this log group.
+        '''
+        result = self._values.get("field_index_policies")
+        return typing.cast(typing.Optional[typing.List[FieldIndexPolicy]], result)
+
     @builtins.property
     def log_group_class(self) -> typing.Optional[LogGroupClass]:
         '''The class of the log group. Possible values are: STANDARD and INFREQUENT_ACCESS.
@@ -13616,6 +13738,8 @@ __all__ = [
     "DataProtectionPolicy",
     "DataProtectionPolicyProps",
     "Distribution",
+    "FieldIndexPolicy",
+    "FieldIndexPolicyProps",
     "FilterPattern",
     "IFilterPattern",
     "ILogGroup",
@@ -14865,6 +14989,13 @@ def _typecheckingstub__a7783165e1d00e232a8ee35869f53b7ff500c9680f96b895f705e2447
     """Type checking stubs"""
     pass
 
+def _typecheckingstub__8587c6606bf8df6db1fab55d5f7ea689b5960f088bf6825593078b791719378c(
+    *,
+    fields: typing.Sequence[builtins.str],
+) -> None:
+    """Type checking stubs"""
+    pass
+
 def _typecheckingstub__ef6e7314c6a5197496584b4f3fc9dc8a24050e8d3d30eabb788540b98e00e4f0(
     *patterns: JsonPattern,
 ) -> None:
@@ -15053,6 +15184,7 @@ def _typecheckingstub__308a02ff022bfc4531ef0c547fbfb8db809293b3cda70c61106c9bc27
     *,
     data_protection_policy: typing.Optional[DataProtectionPolicy] = None,
     encryption_key: typing.Optional[_IKey_5f11635f] = None,
+    field_index_policies: typing.Optional[typing.Sequence[FieldIndexPolicy]] = None,
     log_group_class: typing.Optional[LogGroupClass] = None,
     log_group_name: typing.Optional[builtins.str] = None,
     removal_policy: typing.Optional[_RemovalPolicy_9f93c814] = None,
@@ -15165,6 +15297,7 @@ def _typecheckingstub__df51a93f7809d59dd37d78a60967e0071dab4876ea1cd5ecd658ac3c8
     *,
     data_protection_policy: typing.Optional[DataProtectionPolicy] = None,
     encryption_key: typing.Optional[_IKey_5f11635f] = None,
+    field_index_policies: typing.Optional[typing.Sequence[FieldIndexPolicy]] = None,
     log_group_class: typing.Optional[LogGroupClass] = None,
     log_group_name: typing.Optional[builtins.str] = None,
     removal_policy: typing.Optional[_RemovalPolicy_9f93c814] = None,