aws-cdk-lib 2.153.0__py3-none-any.whl → 2.154.0__py3-none-any.whl

aws_cdk/aws_elasticache/__init__.py

@@ -153,26 +153,26 @@ class CfnCacheCluster(
         '''
         :param scope: Scope in which this resource is defined.
         :param id: Construct identifier for this resource (unique in its scope).
-        :param cache_node_type: The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. Changing the CacheNodeType of a Memcached instance is currently not supported. If you need to scale using Memcached, we recommend forcing a replacement update by changing the ``LogicalResourceId`` of the resource. - General purpose: - Current generation: *M6g node types:* ``cache.m6g.large`` , ``cache.m6g.xlarge`` , ``cache.m6g.2xlarge`` , ``cache.m6g.4xlarge`` , ``cache.m6g.8xlarge`` , ``cache.m6g.12xlarge`` , ``cache.m6g.16xlarge`` , ``cache.m6g.24xlarge`` *M5 node types:* ``cache.m5.large`` , ``cache.m5.xlarge`` , ``cache.m5.2xlarge`` , ``cache.m5.4xlarge`` , ``cache.m5.12xlarge`` , ``cache.m5.24xlarge`` *M4 node types:* ``cache.m4.large`` , ``cache.m4.xlarge`` , ``cache.m4.2xlarge`` , ``cache.m4.4xlarge`` , ``cache.m4.10xlarge`` *T4g node types:* ``cache.t4g.micro`` , ``cache.t4g.small`` , ``cache.t4g.medium`` *T3 node types:* ``cache.t3.micro`` , ``cache.t3.small`` , ``cache.t3.medium`` *T2 node types:* ``cache.t2.micro`` , ``cache.t2.small`` , ``cache.t2.medium`` - Previous generation: (not recommended) *T1 node types:* ``cache.t1.micro`` *M1 node types:* ``cache.m1.small`` , ``cache.m1.medium`` , ``cache.m1.large`` , ``cache.m1.xlarge`` *M3 node types:* ``cache.m3.medium`` , ``cache.m3.large`` , ``cache.m3.xlarge`` , ``cache.m3.2xlarge`` - Compute optimized: - Previous generation: (not recommended) *C1 node types:* ``cache.c1.xlarge`` - Memory optimized: - Current generation: *R6gd node types:* ``cache.r6gd.xlarge`` , ``cache.r6gd.2xlarge`` , ``cache.r6gd.4xlarge`` , ``cache.r6gd.8xlarge`` , ``cache.r6gd.12xlarge`` , ``cache.r6gd.16xlarge`` .. epigraph:: The ``r6gd`` family is available in the following regions: ``us-east-2`` , ``us-east-1`` , ``us-west-2`` , ``us-west-1`` , ``eu-west-1`` , ``eu-central-1`` , ``ap-northeast-1`` , ``ap-southeast-1`` , ``ap-southeast-2`` . *R6g node types:* ``cache.r6g.large`` , ``cache.r6g.xlarge`` , ``cache.r6g.2xlarge`` , ``cache.r6g.4xlarge`` , ``cache.r6g.8xlarge`` , ``cache.r6g.12xlarge`` , ``cache.r6g.16xlarge`` , ``cache.r6g.24xlarge`` *R5 node types:* ``cache.r5.large`` , ``cache.r5.xlarge`` , ``cache.r5.2xlarge`` , ``cache.r5.4xlarge`` , ``cache.r5.12xlarge`` , ``cache.r5.24xlarge`` *R4 node types:* ``cache.r4.large`` , ``cache.r4.xlarge`` , ``cache.r4.2xlarge`` , ``cache.r4.4xlarge`` , ``cache.r4.8xlarge`` , ``cache.r4.16xlarge`` - Previous generation: (not recommended) *M2 node types:* ``cache.m2.xlarge`` , ``cache.m2.2xlarge`` , ``cache.m2.4xlarge`` *R3 node types:* ``cache.r3.large`` , ``cache.r3.xlarge`` , ``cache.r3.2xlarge`` , ``cache.r3.4xlarge`` , ``cache.r3.8xlarge`` For region availability, see `Supported Node Types by Region <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion>`_ *Additional node type info* - All current generation instance types are created in Amazon VPC by default. - Redis append-only files (AOF) are not supported for T1 or T2 instances. - Redis Multi-AZ with automatic failover is not supported on T1 instances. - Redis configuration variables ``appendonly`` and ``appendfsync`` are not supported on Redis version 2.8.22 and later.
+        :param cache_node_type: The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. Changing the CacheNodeType of a Memcached instance is currently not supported. If you need to scale using Memcached, we recommend forcing a replacement update by changing the ``LogicalResourceId`` of the resource. - General purpose: - Current generation: *M6g node types:* ``cache.m6g.large`` , ``cache.m6g.xlarge`` , ``cache.m6g.2xlarge`` , ``cache.m6g.4xlarge`` , ``cache.m6g.8xlarge`` , ``cache.m6g.12xlarge`` , ``cache.m6g.16xlarge`` , ``cache.m6g.24xlarge`` *M5 node types:* ``cache.m5.large`` , ``cache.m5.xlarge`` , ``cache.m5.2xlarge`` , ``cache.m5.4xlarge`` , ``cache.m5.12xlarge`` , ``cache.m5.24xlarge`` *M4 node types:* ``cache.m4.large`` , ``cache.m4.xlarge`` , ``cache.m4.2xlarge`` , ``cache.m4.4xlarge`` , ``cache.m4.10xlarge`` *T4g node types:* ``cache.t4g.micro`` , ``cache.t4g.small`` , ``cache.t4g.medium`` *T3 node types:* ``cache.t3.micro`` , ``cache.t3.small`` , ``cache.t3.medium`` *T2 node types:* ``cache.t2.micro`` , ``cache.t2.small`` , ``cache.t2.medium`` - Previous generation: (not recommended) *T1 node types:* ``cache.t1.micro`` *M1 node types:* ``cache.m1.small`` , ``cache.m1.medium`` , ``cache.m1.large`` , ``cache.m1.xlarge`` *M3 node types:* ``cache.m3.medium`` , ``cache.m3.large`` , ``cache.m3.xlarge`` , ``cache.m3.2xlarge`` - Compute optimized: - Previous generation: (not recommended) *C1 node types:* ``cache.c1.xlarge`` - Memory optimized: - Current generation: *R6gd node types:* ``cache.r6gd.xlarge`` , ``cache.r6gd.2xlarge`` , ``cache.r6gd.4xlarge`` , ``cache.r6gd.8xlarge`` , ``cache.r6gd.12xlarge`` , ``cache.r6gd.16xlarge`` .. epigraph:: The ``r6gd`` family is available in the following regions: ``us-east-2`` , ``us-east-1`` , ``us-west-2`` , ``us-west-1`` , ``eu-west-1`` , ``eu-central-1`` , ``ap-northeast-1`` , ``ap-southeast-1`` , ``ap-southeast-2`` . *R6g node types:* ``cache.r6g.large`` , ``cache.r6g.xlarge`` , ``cache.r6g.2xlarge`` , ``cache.r6g.4xlarge`` , ``cache.r6g.8xlarge`` , ``cache.r6g.12xlarge`` , ``cache.r6g.16xlarge`` , ``cache.r6g.24xlarge`` *R5 node types:* ``cache.r5.large`` , ``cache.r5.xlarge`` , ``cache.r5.2xlarge`` , ``cache.r5.4xlarge`` , ``cache.r5.12xlarge`` , ``cache.r5.24xlarge`` *R4 node types:* ``cache.r4.large`` , ``cache.r4.xlarge`` , ``cache.r4.2xlarge`` , ``cache.r4.4xlarge`` , ``cache.r4.8xlarge`` , ``cache.r4.16xlarge`` - Previous generation: (not recommended) *M2 node types:* ``cache.m2.xlarge`` , ``cache.m2.2xlarge`` , ``cache.m2.4xlarge`` *R3 node types:* ``cache.r3.large`` , ``cache.r3.xlarge`` , ``cache.r3.2xlarge`` , ``cache.r3.4xlarge`` , ``cache.r3.8xlarge`` For region availability, see `Supported Node Types by Region <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion>`_ *Additional node type info* - All current generation instance types are created in Amazon VPC by default. - Redis OSS append-only files (AOF) are not supported for T1 or T2 instances. - Redis OSS Multi-AZ with automatic failover is not supported on T1 instances. - Redis OSS configuration variables ``appendonly`` and ``appendfsync`` are not supported on Redis OSS version 2.8.22 and later.
         :param engine: The name of the cache engine to be used for this cluster. Valid values for this parameter are: ``memcached`` | ``redis``
         :param num_cache_nodes: The number of cache nodes that the cache cluster should have. .. epigraph:: However, if the ``PreferredAvailabilityZone`` and ``PreferredAvailabilityZones`` properties were not previously specified and you don't specify any new values, an update requires `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
-        :param auto_minor_version_upgrade: If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+        :param auto_minor_version_upgrade: If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
         :param az_mode: Specifies whether the nodes in this Memcached cluster are created in a single Availability Zone or created across multiple Availability Zones in the cluster's region. This parameter is only supported for Memcached clusters. If the ``AZMode`` and ``PreferredAvailabilityZones`` are not specified, ElastiCache assumes ``single-az`` mode.
         :param cache_parameter_group_name: The name of the parameter group to associate with this cluster. If this argument is omitted, the default parameter group for the specified engine is used. You cannot use any parameter group which has ``cluster-enabled='yes'`` when creating a cluster.
         :param cache_security_group_names: A list of security group names to associate with this cluster. Use this parameter only when you are creating a cluster outside of an Amazon Virtual Private Cloud (Amazon VPC).
         :param cache_subnet_group_name: The name of the subnet group to be used for the cluster. Use this parameter only when you are creating a cluster in an Amazon Virtual Private Cloud (Amazon VPC). .. epigraph:: If you're going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see ``[AWS::ElastiCache::SubnetGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-subnetgroup.html) .``
         :param cluster_name: A name for the cache cluster. If you don't specify a name, AWS CloudFormation generates a unique physical ID and uses that ID for the cache cluster. For more information, see `Name Type <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-name.html>`_ . The name must contain 1 to 50 alphanumeric characters or hyphens. The name must start with a letter and cannot end with a hyphen or contain two consecutive hyphens.
         :param engine_version: The version number of the cache engine to be used for this cluster. To view the supported cache engine versions, use the DescribeCacheEngineVersions operation. *Important:* You can upgrade to a newer engine version (see `Selecting a Cache Engine and Version <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/SelectEngine.html#VersionManagement>`_ ), but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.
-        :param ip_discovery: The network type you choose when modifying a cluster, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param ip_discovery: The network type you choose when modifying a cluster, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
         :param log_delivery_configurations: Specifies the destination, format and type of the logs.
-        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
         :param notification_topic_arn: The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent. .. epigraph:: The Amazon SNS topic owner must be the same as the cluster owner.
         :param port: The port number on which each of the cache nodes accepts connections.
         :param preferred_availability_zone: The EC2 Availability Zone in which the cluster is created. All nodes belonging to this cluster are placed in the preferred Availability Zone. If you want to create your nodes across multiple Availability Zones, use ``PreferredAvailabilityZones`` . Default: System chosen Availability Zone.
         :param preferred_availability_zones: A list of the Availability Zones in which cache nodes are created. The order of the zones in the list is not important. This option is only supported on Memcached. .. epigraph:: If you are creating your cluster in an Amazon VPC (recommended) you can only locate nodes in Availability Zones that are associated with the subnets in the selected subnet group. The number of Availability Zones listed must equal the value of ``NumCacheNodes`` . If you want all the nodes in the same Availability Zone, use ``PreferredAvailabilityZone`` instead, or repeat the Availability Zone multiple times in the list. Default: System chosen Availability Zones.
         :param preferred_maintenance_window: Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ``ddd`` are: - ``sun`` - ``mon`` - ``tue`` - ``wed`` - ``thu`` - ``fri`` - ``sat`` Example: ``sun:23:00-mon:01:30``
-        :param snapshot_arns: A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis RDB snapshot file stored in Amazon S3. The snapshot file is used to populate the node group (shard). The Amazon S3 object name in the ARN cannot contain any commas. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` . Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
-        :param snapshot_name: The name of a Redis snapshot from which to restore data into the new node group (shard). The snapshot status changes to ``restoring`` while the new node group (shard) is being created. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` .
+        :param snapshot_arns: A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis OSS RDB snapshot file stored in Amazon S3. The snapshot file is used to populate the node group (shard). The Amazon S3 object name in the ARN cannot contain any commas. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` . Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
+        :param snapshot_name: The name of a Redis OSS snapshot from which to restore data into the new node group (shard). The snapshot status changes to ``restoring`` while the new node group (shard) is being created. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` .
         :param snapshot_retention_limit: The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set ``SnapshotRetentionLimit`` to 5, a snapshot taken today is retained for 5 days before being deleted. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` . Default: 0 (i.e., automatic backups are disabled for this cache cluster).
         :param snapshot_window: The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard). Example: ``05:00-09:00`` If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` .
         :param tags: A list of tags to be added to this resource.
@@ -250,7 +250,7 @@ class CfnCacheCluster(
 
         .. epigraph::
 
-           Redis (cluster mode disabled) replication groups don't have this attribute. Therefore, ``Fn::GetAtt`` returns a value for this attribute only if the replication group is clustered. Otherwise, ``Fn::GetAtt`` fails.
+           Redis OSS (cluster mode disabled) replication groups don't have this attribute. Therefore, ``Fn::GetAtt`` returns a value for this attribute only if the replication group is clustered. Otherwise, ``Fn::GetAtt`` fails.
 
         :cloudformationAttribute: ConfigurationEndpoint.Address
         '''
@@ -263,7 +263,7 @@ class CfnCacheCluster(
 
         .. epigraph::
 
-           Redis (cluster mode disabled) replication groups don't have this attribute. Therefore, ``Fn::GetAtt`` returns a value for this attribute only if the replication group is clustered. Otherwise, ``Fn::GetAtt`` fails.
+           Redis OSS (cluster mode disabled) replication groups don't have this attribute. Therefore, ``Fn::GetAtt`` returns a value for this attribute only if the replication group is clustered. Otherwise, ``Fn::GetAtt`` fails.
 
         :cloudformationAttribute: ConfigurationEndpoint.Port
         '''
@@ -281,7 +281,7 @@ class CfnCacheCluster(
     @builtins.property
     @jsii.member(jsii_name="attrRedisEndpointAddress")
     def attr_redis_endpoint_address(self) -> builtins.str:
-        '''The DNS address of the configuration endpoint for the Redis cache cluster.
+        '''The DNS address of the configuration endpoint for the Redis OSS cache cluster.
 
         :cloudformationAttribute: RedisEndpoint.Address
         '''
@@ -290,7 +290,7 @@ class CfnCacheCluster(
     @builtins.property
     @jsii.member(jsii_name="attrRedisEndpointPort")
     def attr_redis_endpoint_port(self) -> builtins.str:
-        '''The port number of the configuration endpoint for the Redis cache cluster.
+        '''The port number of the configuration endpoint for the Redis OSS cache cluster.
 
         :cloudformationAttribute: RedisEndpoint.Port
         '''
@@ -318,7 +318,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__32d9802d6751a916028ade8020c1b88f4de76492648ad82353d20bc756837067)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheNodeType", value)
+        jsii.set(self, "cacheNodeType", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="engine")
@@ -331,7 +331,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__4b478c5471c9d0a76c5100e39ca78b723b0c0df15786d8701347d9cb5eabbdf7)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engine", value)
+        jsii.set(self, "engine", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="numCacheNodes")
@@ -344,14 +344,14 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__3efa7fe979ad2ca65054b031fb5cd53cdae6a1094de4cdb6bc9c480d5b2d7a9f)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "numCacheNodes", value)
+        jsii.set(self, "numCacheNodes", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="autoMinorVersionUpgrade")
     def auto_minor_version_upgrade(
         self,
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
-        '''If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.'''
+        '''If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.'''
         return typing.cast(typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]], jsii.get(self, "autoMinorVersionUpgrade"))
 
     @auto_minor_version_upgrade.setter
@@ -362,7 +362,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b74ab91b309fe8b033442df78ec7c947ef8b8ceac25b5fb4347e7e697fb388da)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "autoMinorVersionUpgrade", value)
+        jsii.set(self, "autoMinorVersionUpgrade", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="azMode")
@@ -375,7 +375,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__4a44d250f986c389a2d9f94d9cca8adc9e59c15e75d4c051e15c57482b9ae9f1)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "azMode", value)
+        jsii.set(self, "azMode", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheParameterGroupName")
@@ -388,7 +388,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__cc3ac1b1f30d407a5545f9f5024999aba8b2072b3d9b7d1c0941506aa6431636)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheParameterGroupName", value)
+        jsii.set(self, "cacheParameterGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheSecurityGroupNames")
@@ -404,7 +404,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__83da5de50c36f6b8acecefb71f2d1985a98bac5b47b9355f1e680a968d3b916a)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheSecurityGroupNames", value)
+        jsii.set(self, "cacheSecurityGroupNames", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheSubnetGroupName")
@@ -417,7 +417,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f9b8dc42c226f2bde38136c38ed0888aa8016a952545561870cd97fdb1756c48)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheSubnetGroupName", value)
+        jsii.set(self, "cacheSubnetGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="clusterName")
@@ -430,7 +430,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__411d6faf725ba835ededa6d23d62caaccc85488363ac53847d26489a9b698e4c)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "clusterName", value)
+        jsii.set(self, "clusterName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="engineVersion")
@@ -443,7 +443,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c11aa65ad582a06f82ee3dccb397779d9465180eeb2cc3743f037d45678b9315)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engineVersion", value)
+        jsii.set(self, "engineVersion", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="ipDiscovery")
@@ -456,7 +456,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__9d9fae8437c1df5da80ef1dcc1d540757d3eeed744bbf8056a118a155cda7c0b)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "ipDiscovery", value)
+        jsii.set(self, "ipDiscovery", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="logDeliveryConfigurations")
@@ -474,7 +474,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__92cc1290aacd3e87fdb8540c5a430dd3781b4d21f64685730ff4176b05840454)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "logDeliveryConfigurations", value)
+        jsii.set(self, "logDeliveryConfigurations", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="networkType")
@@ -487,7 +487,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__fef16cd8be345649445baed2ab221599bc312c701ed3cae8a08ca0202aedbbe0)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "networkType", value)
+        jsii.set(self, "networkType", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="notificationTopicArn")
@@ -500,7 +500,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f0e5b55a4eeff9a98884374f1fb103e28154e68b08e9c604194db4263d8d260c)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "notificationTopicArn", value)
+        jsii.set(self, "notificationTopicArn", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="port")
@@ -513,7 +513,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c52a7b53b9de4c47324594ae4fcae12b0f548358d236a57d0d8180b7a52eb525)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "port", value)
+        jsii.set(self, "port", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="preferredAvailabilityZone")
@@ -526,7 +526,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ba8deec010d483a5b4cccad86835cc42901ab76f481c5140bf432d398851cab3)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "preferredAvailabilityZone", value)
+        jsii.set(self, "preferredAvailabilityZone", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="preferredAvailabilityZones")
@@ -544,7 +544,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__bdfef5e25f162b7075022826fc8305415c9b26eba0d5f6a128a30b8e191ecf2d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "preferredAvailabilityZones", value)
+        jsii.set(self, "preferredAvailabilityZones", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="preferredMaintenanceWindow")
@@ -560,12 +560,12 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c036bebdfade47bb20565d6116e08cbc6b2c289599c511df24ad3ec9395670fc)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "preferredMaintenanceWindow", value)
+        jsii.set(self, "preferredMaintenanceWindow", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotArns")
     def snapshot_arns(self) -> typing.Optional[typing.List[builtins.str]]:
-        '''A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis RDB snapshot file stored in Amazon S3.'''
+        '''A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis OSS RDB snapshot file stored in Amazon S3.'''
         return typing.cast(typing.Optional[typing.List[builtins.str]], jsii.get(self, "snapshotArns"))
 
     @snapshot_arns.setter
@@ -573,12 +573,12 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ce434b0b24d4c0aed191822a2ef96062ce0e4f82dde36706dda0cb9378020e9d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotArns", value)
+        jsii.set(self, "snapshotArns", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotName")
     def snapshot_name(self) -> typing.Optional[builtins.str]:
-        '''The name of a Redis snapshot from which to restore data into the new node group (shard).'''
+        '''The name of a Redis OSS snapshot from which to restore data into the new node group (shard).'''
         return typing.cast(typing.Optional[builtins.str], jsii.get(self, "snapshotName"))
 
     @snapshot_name.setter
@@ -586,7 +586,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ade889ee7923a82577f80b57aeef301ae196124bdb4d5ec2cd87c371be03e5a2)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotName", value)
+        jsii.set(self, "snapshotName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotRetentionLimit")
@@ -599,7 +599,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__36088ccf4e3bb96fca149a1dc57264e825a3fdf78d280f320127ed72733b6ef2)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotRetentionLimit", value)
+        jsii.set(self, "snapshotRetentionLimit", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotWindow")
@@ -612,7 +612,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__00985af0e32e63259c356a919afbcf2f8aec8c2faedaece96112bbb03f945239)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotWindow", value)
+        jsii.set(self, "snapshotWindow", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -625,7 +625,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__bb033789ee709e38cf2df5c67f41474c2337ba8ce07eac9ee4a2c714fc9bc989)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="transitEncryptionEnabled")
@@ -643,7 +643,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__5b5c36f3eb4db3de564bb875816a147602a4348d296a24fafccdae0acba9440b)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "transitEncryptionEnabled", value)
+        jsii.set(self, "transitEncryptionEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="vpcSecurityGroupIds")
@@ -659,7 +659,7 @@ class CfnCacheCluster(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__2ca563dd75820580354392265b3bdcb759aaa1e66fadcc95daa9e8b3b8bc892d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "vpcSecurityGroupIds", value)
+        jsii.set(self, "vpcSecurityGroupIds", value) # pyright: ignore[reportArgumentType]
 
     @jsii.data_type(
         jsii_type="aws-cdk-lib.aws_elasticache.CfnCacheCluster.CloudWatchLogsDestinationDetailsProperty",
@@ -1035,26 +1035,26 @@ class CfnCacheClusterProps:
     ) -> None:
         '''Properties for defining a ``CfnCacheCluster``.
 
-        :param cache_node_type: The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. Changing the CacheNodeType of a Memcached instance is currently not supported. If you need to scale using Memcached, we recommend forcing a replacement update by changing the ``LogicalResourceId`` of the resource. - General purpose: - Current generation: *M6g node types:* ``cache.m6g.large`` , ``cache.m6g.xlarge`` , ``cache.m6g.2xlarge`` , ``cache.m6g.4xlarge`` , ``cache.m6g.8xlarge`` , ``cache.m6g.12xlarge`` , ``cache.m6g.16xlarge`` , ``cache.m6g.24xlarge`` *M5 node types:* ``cache.m5.large`` , ``cache.m5.xlarge`` , ``cache.m5.2xlarge`` , ``cache.m5.4xlarge`` , ``cache.m5.12xlarge`` , ``cache.m5.24xlarge`` *M4 node types:* ``cache.m4.large`` , ``cache.m4.xlarge`` , ``cache.m4.2xlarge`` , ``cache.m4.4xlarge`` , ``cache.m4.10xlarge`` *T4g node types:* ``cache.t4g.micro`` , ``cache.t4g.small`` , ``cache.t4g.medium`` *T3 node types:* ``cache.t3.micro`` , ``cache.t3.small`` , ``cache.t3.medium`` *T2 node types:* ``cache.t2.micro`` , ``cache.t2.small`` , ``cache.t2.medium`` - Previous generation: (not recommended) *T1 node types:* ``cache.t1.micro`` *M1 node types:* ``cache.m1.small`` , ``cache.m1.medium`` , ``cache.m1.large`` , ``cache.m1.xlarge`` *M3 node types:* ``cache.m3.medium`` , ``cache.m3.large`` , ``cache.m3.xlarge`` , ``cache.m3.2xlarge`` - Compute optimized: - Previous generation: (not recommended) *C1 node types:* ``cache.c1.xlarge`` - Memory optimized: - Current generation: *R6gd node types:* ``cache.r6gd.xlarge`` , ``cache.r6gd.2xlarge`` , ``cache.r6gd.4xlarge`` , ``cache.r6gd.8xlarge`` , ``cache.r6gd.12xlarge`` , ``cache.r6gd.16xlarge`` .. epigraph:: The ``r6gd`` family is available in the following regions: ``us-east-2`` , ``us-east-1`` , ``us-west-2`` , ``us-west-1`` , ``eu-west-1`` , ``eu-central-1`` , ``ap-northeast-1`` , ``ap-southeast-1`` , ``ap-southeast-2`` . *R6g node types:* ``cache.r6g.large`` , ``cache.r6g.xlarge`` , ``cache.r6g.2xlarge`` , ``cache.r6g.4xlarge`` , ``cache.r6g.8xlarge`` , ``cache.r6g.12xlarge`` , ``cache.r6g.16xlarge`` , ``cache.r6g.24xlarge`` *R5 node types:* ``cache.r5.large`` , ``cache.r5.xlarge`` , ``cache.r5.2xlarge`` , ``cache.r5.4xlarge`` , ``cache.r5.12xlarge`` , ``cache.r5.24xlarge`` *R4 node types:* ``cache.r4.large`` , ``cache.r4.xlarge`` , ``cache.r4.2xlarge`` , ``cache.r4.4xlarge`` , ``cache.r4.8xlarge`` , ``cache.r4.16xlarge`` - Previous generation: (not recommended) *M2 node types:* ``cache.m2.xlarge`` , ``cache.m2.2xlarge`` , ``cache.m2.4xlarge`` *R3 node types:* ``cache.r3.large`` , ``cache.r3.xlarge`` , ``cache.r3.2xlarge`` , ``cache.r3.4xlarge`` , ``cache.r3.8xlarge`` For region availability, see `Supported Node Types by Region <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion>`_ *Additional node type info* - All current generation instance types are created in Amazon VPC by default. - Redis append-only files (AOF) are not supported for T1 or T2 instances. - Redis Multi-AZ with automatic failover is not supported on T1 instances. - Redis configuration variables ``appendonly`` and ``appendfsync`` are not supported on Redis version 2.8.22 and later.
+        :param cache_node_type: The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. Changing the CacheNodeType of a Memcached instance is currently not supported. If you need to scale using Memcached, we recommend forcing a replacement update by changing the ``LogicalResourceId`` of the resource. - General purpose: - Current generation: *M6g node types:* ``cache.m6g.large`` , ``cache.m6g.xlarge`` , ``cache.m6g.2xlarge`` , ``cache.m6g.4xlarge`` , ``cache.m6g.8xlarge`` , ``cache.m6g.12xlarge`` , ``cache.m6g.16xlarge`` , ``cache.m6g.24xlarge`` *M5 node types:* ``cache.m5.large`` , ``cache.m5.xlarge`` , ``cache.m5.2xlarge`` , ``cache.m5.4xlarge`` , ``cache.m5.12xlarge`` , ``cache.m5.24xlarge`` *M4 node types:* ``cache.m4.large`` , ``cache.m4.xlarge`` , ``cache.m4.2xlarge`` , ``cache.m4.4xlarge`` , ``cache.m4.10xlarge`` *T4g node types:* ``cache.t4g.micro`` , ``cache.t4g.small`` , ``cache.t4g.medium`` *T3 node types:* ``cache.t3.micro`` , ``cache.t3.small`` , ``cache.t3.medium`` *T2 node types:* ``cache.t2.micro`` , ``cache.t2.small`` , ``cache.t2.medium`` - Previous generation: (not recommended) *T1 node types:* ``cache.t1.micro`` *M1 node types:* ``cache.m1.small`` , ``cache.m1.medium`` , ``cache.m1.large`` , ``cache.m1.xlarge`` *M3 node types:* ``cache.m3.medium`` , ``cache.m3.large`` , ``cache.m3.xlarge`` , ``cache.m3.2xlarge`` - Compute optimized: - Previous generation: (not recommended) *C1 node types:* ``cache.c1.xlarge`` - Memory optimized: - Current generation: *R6gd node types:* ``cache.r6gd.xlarge`` , ``cache.r6gd.2xlarge`` , ``cache.r6gd.4xlarge`` , ``cache.r6gd.8xlarge`` , ``cache.r6gd.12xlarge`` , ``cache.r6gd.16xlarge`` .. epigraph:: The ``r6gd`` family is available in the following regions: ``us-east-2`` , ``us-east-1`` , ``us-west-2`` , ``us-west-1`` , ``eu-west-1`` , ``eu-central-1`` , ``ap-northeast-1`` , ``ap-southeast-1`` , ``ap-southeast-2`` . *R6g node types:* ``cache.r6g.large`` , ``cache.r6g.xlarge`` , ``cache.r6g.2xlarge`` , ``cache.r6g.4xlarge`` , ``cache.r6g.8xlarge`` , ``cache.r6g.12xlarge`` , ``cache.r6g.16xlarge`` , ``cache.r6g.24xlarge`` *R5 node types:* ``cache.r5.large`` , ``cache.r5.xlarge`` , ``cache.r5.2xlarge`` , ``cache.r5.4xlarge`` , ``cache.r5.12xlarge`` , ``cache.r5.24xlarge`` *R4 node types:* ``cache.r4.large`` , ``cache.r4.xlarge`` , ``cache.r4.2xlarge`` , ``cache.r4.4xlarge`` , ``cache.r4.8xlarge`` , ``cache.r4.16xlarge`` - Previous generation: (not recommended) *M2 node types:* ``cache.m2.xlarge`` , ``cache.m2.2xlarge`` , ``cache.m2.4xlarge`` *R3 node types:* ``cache.r3.large`` , ``cache.r3.xlarge`` , ``cache.r3.2xlarge`` , ``cache.r3.4xlarge`` , ``cache.r3.8xlarge`` For region availability, see `Supported Node Types by Region <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion>`_ *Additional node type info* - All current generation instance types are created in Amazon VPC by default. - Redis OSS append-only files (AOF) are not supported for T1 or T2 instances. - Redis OSS Multi-AZ with automatic failover is not supported on T1 instances. - Redis OSS configuration variables ``appendonly`` and ``appendfsync`` are not supported on Redis OSS version 2.8.22 and later.
         :param engine: The name of the cache engine to be used for this cluster. Valid values for this parameter are: ``memcached`` | ``redis``
         :param num_cache_nodes: The number of cache nodes that the cache cluster should have. .. epigraph:: However, if the ``PreferredAvailabilityZone`` and ``PreferredAvailabilityZones`` properties were not previously specified and you don't specify any new values, an update requires `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
-        :param auto_minor_version_upgrade: If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+        :param auto_minor_version_upgrade: If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
         :param az_mode: Specifies whether the nodes in this Memcached cluster are created in a single Availability Zone or created across multiple Availability Zones in the cluster's region. This parameter is only supported for Memcached clusters. If the ``AZMode`` and ``PreferredAvailabilityZones`` are not specified, ElastiCache assumes ``single-az`` mode.
         :param cache_parameter_group_name: The name of the parameter group to associate with this cluster. If this argument is omitted, the default parameter group for the specified engine is used. You cannot use any parameter group which has ``cluster-enabled='yes'`` when creating a cluster.
         :param cache_security_group_names: A list of security group names to associate with this cluster. Use this parameter only when you are creating a cluster outside of an Amazon Virtual Private Cloud (Amazon VPC).
         :param cache_subnet_group_name: The name of the subnet group to be used for the cluster. Use this parameter only when you are creating a cluster in an Amazon Virtual Private Cloud (Amazon VPC). .. epigraph:: If you're going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see ``[AWS::ElastiCache::SubnetGroup](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-subnetgroup.html) .``
         :param cluster_name: A name for the cache cluster. If you don't specify a name, AWS CloudFormation generates a unique physical ID and uses that ID for the cache cluster. For more information, see `Name Type <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-name.html>`_ . The name must contain 1 to 50 alphanumeric characters or hyphens. The name must start with a letter and cannot end with a hyphen or contain two consecutive hyphens.
         :param engine_version: The version number of the cache engine to be used for this cluster. To view the supported cache engine versions, use the DescribeCacheEngineVersions operation. *Important:* You can upgrade to a newer engine version (see `Selecting a Cache Engine and Version <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/SelectEngine.html#VersionManagement>`_ ), but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.
-        :param ip_discovery: The network type you choose when modifying a cluster, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param ip_discovery: The network type you choose when modifying a cluster, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
         :param log_delivery_configurations: Specifies the destination, format and type of the logs.
-        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
         :param notification_topic_arn: The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent. .. epigraph:: The Amazon SNS topic owner must be the same as the cluster owner.
         :param port: The port number on which each of the cache nodes accepts connections.
         :param preferred_availability_zone: The EC2 Availability Zone in which the cluster is created. All nodes belonging to this cluster are placed in the preferred Availability Zone. If you want to create your nodes across multiple Availability Zones, use ``PreferredAvailabilityZones`` . Default: System chosen Availability Zone.
         :param preferred_availability_zones: A list of the Availability Zones in which cache nodes are created. The order of the zones in the list is not important. This option is only supported on Memcached. .. epigraph:: If you are creating your cluster in an Amazon VPC (recommended) you can only locate nodes in Availability Zones that are associated with the subnets in the selected subnet group. The number of Availability Zones listed must equal the value of ``NumCacheNodes`` . If you want all the nodes in the same Availability Zone, use ``PreferredAvailabilityZone`` instead, or repeat the Availability Zone multiple times in the list. Default: System chosen Availability Zones.
         :param preferred_maintenance_window: Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ``ddd`` are: - ``sun`` - ``mon`` - ``tue`` - ``wed`` - ``thu`` - ``fri`` - ``sat`` Example: ``sun:23:00-mon:01:30``
-        :param snapshot_arns: A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis RDB snapshot file stored in Amazon S3. The snapshot file is used to populate the node group (shard). The Amazon S3 object name in the ARN cannot contain any commas. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` . Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
-        :param snapshot_name: The name of a Redis snapshot from which to restore data into the new node group (shard). The snapshot status changes to ``restoring`` while the new node group (shard) is being created. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` .
+        :param snapshot_arns: A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis OSS RDB snapshot file stored in Amazon S3. The snapshot file is used to populate the node group (shard). The Amazon S3 object name in the ARN cannot contain any commas. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` . Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
+        :param snapshot_name: The name of a Redis OSS snapshot from which to restore data into the new node group (shard). The snapshot status changes to ``restoring`` while the new node group (shard) is being created. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` .
         :param snapshot_retention_limit: The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set ``SnapshotRetentionLimit`` to 5, a snapshot taken today is retained for 5 days before being deleted. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` . Default: 0 (i.e., automatic backups are disabled for this cache cluster).
         :param snapshot_window: The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard). Example: ``05:00-09:00`` If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range. .. epigraph:: This parameter is only valid if the ``Engine`` parameter is ``redis`` .
         :param tags: A list of tags to be added to this resource.
@@ -1251,9 +1251,9 @@ class CfnCacheClusterProps:
         *Additional node type info*
 
         - All current generation instance types are created in Amazon VPC by default.
-        - Redis append-only files (AOF) are not supported for T1 or T2 instances.
-        - Redis Multi-AZ with automatic failover is not supported on T1 instances.
-        - Redis configuration variables ``appendonly`` and ``appendfsync`` are not supported on Redis version 2.8.22 and later.
+        - Redis OSS append-only files (AOF) are not supported for T1 or T2 instances.
+        - Redis OSS Multi-AZ with automatic failover is not supported on T1 instances.
+        - Redis OSS configuration variables ``appendonly`` and ``appendfsync`` are not supported on Redis OSS version 2.8.22 and later.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-cachecluster.html#cfn-elasticache-cachecluster-cachenodetype
         '''
@@ -1291,7 +1291,7 @@ class CfnCacheClusterProps:
     def auto_minor_version_upgrade(
         self,
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
-        '''If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+        '''If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-cachecluster.html#cfn-elasticache-cachecluster-autominorversionupgrade
         '''
@@ -1377,7 +1377,7 @@ class CfnCacheClusterProps:
     def ip_discovery(self) -> typing.Optional[builtins.str]:
         '''The network type you choose when modifying a cluster, either ``ipv4`` | ``ipv6`` .
 
-        IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-cachecluster.html#cfn-elasticache-cachecluster-ipdiscovery
         '''
@@ -1399,7 +1399,7 @@ class CfnCacheClusterProps:
     def network_type(self) -> typing.Optional[builtins.str]:
         '''Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` .
 
-        IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-cachecluster.html#cfn-elasticache-cachecluster-networktype
         '''
@@ -1490,7 +1490,7 @@ class CfnCacheClusterProps:
 
     @builtins.property
     def snapshot_arns(self) -> typing.Optional[typing.List[builtins.str]]:
-        '''A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis RDB snapshot file stored in Amazon S3.
+        '''A single-element string list containing an Amazon Resource Name (ARN) that uniquely identifies a Redis OSS RDB snapshot file stored in Amazon S3.
 
         The snapshot file is used to populate the node group (shard). The Amazon S3 object name in the ARN cannot contain any commas.
         .. epigraph::
@@ -1506,7 +1506,7 @@ class CfnCacheClusterProps:
 
     @builtins.property
     def snapshot_name(self) -> typing.Optional[builtins.str]:
-        '''The name of a Redis snapshot from which to restore data into the new node group (shard).
+        '''The name of a Redis OSS snapshot from which to restore data into the new node group (shard).
 
         The snapshot status changes to ``restoring`` while the new node group (shard) is being created.
         .. epigraph::
@@ -1660,10 +1660,10 @@ class CfnGlobalReplicationGroup(
         :param scope: Scope in which this resource is defined.
         :param id: Construct identifier for this resource (unique in its scope).
         :param members: The replication groups that comprise the Global datastore.
-        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis (cluster mode enabled) replication groups.
+        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis OSS (cluster mode enabled) replication groups.
         :param cache_node_type: The cache node type of the Global datastore.
         :param cache_parameter_group_name: The name of the cache parameter group to use with the Global datastore. It must be compatible with the major engine version used by the Global datastore.
-        :param engine_version: The Elasticache Redis engine version.
+        :param engine_version: The Elasticache Redis OSS engine version.
         :param global_node_group_count: The number of node groups that comprise the Global Datastore.
         :param global_replication_group_description: The optional description of the Global datastore.
         :param global_replication_group_id_suffix: The suffix name of a Global Datastore. The suffix guarantees uniqueness of the Global Datastore name across multiple regions.
@@ -1758,7 +1758,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__e868e518f50b5b48c699f872e36b8e20be2702ad6acf8d5f4500e986aac55b3d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "members", value)
+        jsii.set(self, "members", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="automaticFailoverEnabled")
@@ -1776,7 +1776,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__8f937e9779d5fe5d88540d353152c5e7637a4c898506e495763dc389bca1a193)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "automaticFailoverEnabled", value)
+        jsii.set(self, "automaticFailoverEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheNodeType")
@@ -1789,7 +1789,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__bcc0668ac08361dfeaf1c9d3b63f4ce55339cbac4acdba22253a2c6a39440c9c)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheNodeType", value)
+        jsii.set(self, "cacheNodeType", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheParameterGroupName")
@@ -1802,12 +1802,12 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__0848ddc407bc59c23bb3f0758cd29c2ca80ecb4af0b703cfbabe761143efb996)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheParameterGroupName", value)
+        jsii.set(self, "cacheParameterGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="engineVersion")
     def engine_version(self) -> typing.Optional[builtins.str]:
-        '''The Elasticache Redis engine version.'''
+        '''The Elasticache Redis OSS engine version.'''
         return typing.cast(typing.Optional[builtins.str], jsii.get(self, "engineVersion"))
 
     @engine_version.setter
@@ -1815,7 +1815,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__5e6d37e14147abb9446aa94586bbfdc04bcc4cbad9c87b170bc3c934223a3dc1)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engineVersion", value)
+        jsii.set(self, "engineVersion", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="globalNodeGroupCount")
@@ -1828,7 +1828,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__96e8402ce6e7036902a30a006b2e3b7c82ed86d4655e500c78d0ae603a7929b0)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "globalNodeGroupCount", value)
+        jsii.set(self, "globalNodeGroupCount", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="globalReplicationGroupDescription")
@@ -1844,7 +1844,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__3cb8c976f8e943135a48d97d88bf3d8b7dd5f17fcd2b8759518b8b204056bba0)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "globalReplicationGroupDescription", value)
+        jsii.set(self, "globalReplicationGroupDescription", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="globalReplicationGroupIdSuffix")
@@ -1860,7 +1860,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__65acba21207d62e08b1c8c4c4f55ea3089c76799e113952d0b5f8bd4e6ee53d5)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "globalReplicationGroupIdSuffix", value)
+        jsii.set(self, "globalReplicationGroupIdSuffix", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="regionalConfigurations")
@@ -1878,7 +1878,7 @@ class CfnGlobalReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__efeee031dd310c05cefd1733ccdb9d7b436fc018669200525c6f11542ae97dac)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "regionalConfigurations", value)
+        jsii.set(self, "regionalConfigurations", value) # pyright: ignore[reportArgumentType]
 
     @jsii.data_type(
         jsii_type="aws-cdk-lib.aws_elasticache.CfnGlobalReplicationGroup.GlobalReplicationGroupMemberProperty",
@@ -2082,7 +2082,7 @@ class CfnGlobalReplicationGroup(
         ) -> None:
             '''A list of ``PreferredAvailabilityZones`` objects that specifies the configuration of a node group in the resharded cluster.
 
-            :param node_group_id: Either the ElastiCache for Redis supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
+            :param node_group_id: Either the ElastiCache (Redis OSS) supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
             :param preferred_availability_zones: A list of preferred availability zones for the nodes in this cluster.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-globalreplicationgroup-reshardingconfiguration.html
@@ -2111,7 +2111,7 @@ class CfnGlobalReplicationGroup(
 
         @builtins.property
         def node_group_id(self) -> typing.Optional[builtins.str]:
-            '''Either the ElastiCache for Redis supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
+            '''Either the ElastiCache (Redis OSS) supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-globalreplicationgroup-reshardingconfiguration.html#cfn-elasticache-globalreplicationgroup-reshardingconfiguration-nodegroupid
             '''
@@ -2173,10 +2173,10 @@ class CfnGlobalReplicationGroupProps:
         '''Properties for defining a ``CfnGlobalReplicationGroup``.
 
         :param members: The replication groups that comprise the Global datastore.
-        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis (cluster mode enabled) replication groups.
+        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis OSS (cluster mode enabled) replication groups.
         :param cache_node_type: The cache node type of the Global datastore.
         :param cache_parameter_group_name: The name of the cache parameter group to use with the Global datastore. It must be compatible with the major engine version used by the Global datastore.
-        :param engine_version: The Elasticache Redis engine version.
+        :param engine_version: The Elasticache Redis OSS engine version.
         :param global_node_group_count: The number of node groups that comprise the Global Datastore.
         :param global_replication_group_description: The optional description of the Global datastore.
         :param global_replication_group_id_suffix: The suffix name of a Global Datastore. The suffix guarantees uniqueness of the Global Datastore name across multiple regions.
@@ -2265,7 +2265,7 @@ class CfnGlobalReplicationGroupProps:
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
         '''Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.
 
-        ``AutomaticFailoverEnabled`` must be enabled for Redis (cluster mode enabled) replication groups.
+        ``AutomaticFailoverEnabled`` must be enabled for Redis OSS (cluster mode enabled) replication groups.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-globalreplicationgroup.html#cfn-elasticache-globalreplicationgroup-automaticfailoverenabled
         '''
@@ -2294,7 +2294,7 @@ class CfnGlobalReplicationGroupProps:
 
     @builtins.property
     def engine_version(self) -> typing.Optional[builtins.str]:
-        '''The Elasticache Redis engine version.
+        '''The Elasticache Redis OSS engine version.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-globalreplicationgroup.html#cfn-elasticache-globalreplicationgroup-engineversion
         '''
@@ -2458,14 +2458,6 @@ class CfnParameterGroup(
         '''
         return typing.cast(builtins.str, jsii.get(self, "attrCacheParameterGroupName"))
 
-    @builtins.property
-    @jsii.member(jsii_name="attrId")
-    def attr_id(self) -> builtins.str:
-        '''
-        :cloudformationAttribute: Id
-        '''
-        return typing.cast(builtins.str, jsii.get(self, "attrId"))
-
     @builtins.property
     @jsii.member(jsii_name="cfnProperties")
     def _cfn_properties(self) -> typing.Mapping[builtins.str, typing.Any]:
@@ -2488,7 +2480,7 @@ class CfnParameterGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b1c887b1c7836e155f15fbcb98f5393a2b92b4a33873814732bea60f4f1b225f)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheParameterGroupFamily", value)
+        jsii.set(self, "cacheParameterGroupFamily", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="description")
@@ -2501,7 +2493,7 @@ class CfnParameterGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__131595ea286a946147c38535eb5fcf0537b68b2132e909e191998a1e3f21d5f3)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "description", value)
+        jsii.set(self, "description", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="properties")
@@ -2519,7 +2511,7 @@ class CfnParameterGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ad995d05e00fe4d7296f16776a975d33eb5d75180391440607e5d71ae30d1f08)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "properties", value)
+        jsii.set(self, "properties", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -2532,7 +2524,7 @@ class CfnParameterGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f00caea2443ab3a4d0d9d2f1836e1d360d238f759643e2af050c00c5ea4f3efb)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
 
 @jsii.data_type(
@@ -2666,13 +2658,13 @@ class CfnReplicationGroup(
     metaclass=jsii.JSIIMeta,
     jsii_type="aws-cdk-lib.aws_elasticache.CfnReplicationGroup",
 ):
-    '''The ``AWS::ElastiCache::ReplicationGroup`` resource creates an Amazon ElastiCache Redis replication group.
+    '''The ``AWS::ElastiCache::ReplicationGroup`` resource creates an Amazon ElastiCache (Redis OSS) replication group.
 
-    A Redis (cluster mode disabled) replication group is a collection of cache clusters, where one of the clusters is a primary read-write cluster and the others are read-only replicas.
+    A Redis OSS (cluster mode disabled) replication group is a collection of cache clusters, where one of the clusters is a primary read-write cluster and the others are read-only replicas.
 
-    A Redis (cluster mode enabled) cluster is comprised of from 1 to 90 shards (API/CLI: node groups). Each shard has a primary node and up to 5 read-only replica nodes. The configuration can range from 90 shards and 0 replicas to 15 shards and 5 replicas, which is the maximum number or replicas allowed.
+    A Redis OSS (cluster mode enabled) cluster is comprised of from 1 to 90 shards (API/CLI: node groups). Each shard has a primary node and up to 5 read-only replica nodes. The configuration can range from 90 shards and 0 replicas to 15 shards and 5 replicas, which is the maximum number or replicas allowed.
 
-    The node or shard limit can be increased to a maximum of 500 per cluster if the Redis engine version is 5.0.6 or higher. For example, you can choose to configure a 500 node cluster that ranges between 83 shards (one primary and 5 replicas per shard) and 500 shards (single primary and no replicas). Make sure there are enough available IP addresses to accommodate the increase. Common pitfalls include the subnets in the subnet group have too small a CIDR range or the subnets are shared and heavily used by other clusters. For more information, see `Creating a Subnet Group <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/SubnetGroups.Creating.html>`_ . For versions below 5.0.6, the limit is 250 per cluster.
+    The node or shard limit can be increased to a maximum of 500 per cluster if the Redis OSS engine version is 5.0.6 or higher. For example, you can choose to configure a 500 node cluster that ranges between 83 shards (one primary and 5 replicas per shard) and 500 shards (single primary and no replicas). Make sure there are enough available IP addresses to accommodate the increase. Common pitfalls include the subnets in the subnet group have too small a CIDR range or the subnets are shared and heavily used by other clusters. For more information, see `Creating a Subnet Group <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/SubnetGroups.Creating.html>`_ . For versions below 5.0.6, the limit is 250 per cluster.
 
     To request a limit increase, see `Amazon Service Limits <https://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html>`_ and choose the limit type *Nodes per cluster per instance type* .
 
@@ -2801,28 +2793,28 @@ class CfnReplicationGroup(
         :param scope: Scope in which this resource is defined.
         :param id: Construct identifier for this resource (unique in its scope).
         :param replication_group_description: A user-created description for the replication group.
-        :param at_rest_encryption_enabled: A flag that enables encryption at rest when set to ``true`` . You cannot modify the value of ``AtRestEncryptionEnabled`` after the replication group is created. To enable encryption at rest on a replication group you must set ``AtRestEncryptionEnabled`` to ``true`` when you create the replication group. *Required:* Only available when creating a replication group in an Amazon VPC using redis version ``3.2.6`` or ``4.x`` onward. Default: ``false``
-        :param auth_token: *Reserved parameter.* The password used to access a password protected server. ``AuthToken`` can be specified only on replication groups where ``TransitEncryptionEnabled`` is ``true`` . For more information, see `Authenticating Users with the Redis AUTH Command <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/auth.html>`_ . .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` . Password constraints: - Must be only printable ASCII characters. - Must be at least 16 characters and no more than 128 characters in length. - Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ). For more information, see `AUTH password <https://docs.aws.amazon.com/http://redis.io/commands/AUTH>`_ at http://redis.io/commands/AUTH. .. epigraph:: If ADDING the AuthToken, update requires `Replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
-        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis (cluster mode enabled) replication groups. Default: false
-        :param auto_minor_version_upgrade: If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+        :param at_rest_encryption_enabled: A flag that enables encryption at rest when set to ``true`` . You cannot modify the value of ``AtRestEncryptionEnabled`` after the replication group is created. To enable encryption at rest on a replication group you must set ``AtRestEncryptionEnabled`` to ``true`` when you create the replication group. *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version ``3.2.6`` or ``4.x`` onward. Default: ``false``
+        :param auth_token: *Reserved parameter.* The password used to access a password protected server. ``AuthToken`` can be specified only on replication groups where ``TransitEncryptionEnabled`` is ``true`` . For more information, see `Authenticating Users with the Redis OSS AUTH Command <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/auth.html>`_ . .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` . Password constraints: - Must be only printable ASCII characters. - Must be at least 16 characters and no more than 128 characters in length. - Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ). For more information, see `AUTH password <https://docs.aws.amazon.com/http://redis.io/commands/AUTH>`_ at http://redis.io/commands/AUTH. .. epigraph:: If ADDING the AuthToken, update requires `Replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
+        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis OSS (cluster mode enabled) replication groups. Default: false
+        :param auto_minor_version_upgrade: If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
         :param cache_node_type: The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. - General purpose: - Current generation: *M6g node types:* ``cache.m6g.large`` , ``cache.m6g.xlarge`` , ``cache.m6g.2xlarge`` , ``cache.m6g.4xlarge`` , ``cache.m6g.12xlarge`` , ``cache.m6g.24xlarge`` *M5 node types:* ``cache.m5.large`` , ``cache.m5.xlarge`` , ``cache.m5.2xlarge`` , ``cache.m5.4xlarge`` , ``cache.m5.12xlarge`` , ``cache.m5.24xlarge`` *M4 node types:* ``cache.m4.large`` , ``cache.m4.xlarge`` , ``cache.m4.2xlarge`` , ``cache.m4.4xlarge`` , ``cache.m4.10xlarge`` *T4g node types:* ``cache.t4g.micro`` , ``cache.t4g.small`` , ``cache.t4g.medium`` *T3 node types:* ``cache.t3.micro`` , ``cache.t3.small`` , ``cache.t3.medium`` *T2 node types:* ``cache.t2.micro`` , ``cache.t2.small`` , ``cache.t2.medium`` - Previous generation: (not recommended) *T1 node types:* ``cache.t1.micro`` *M1 node types:* ``cache.m1.small`` , ``cache.m1.medium`` , ``cache.m1.large`` , ``cache.m1.xlarge`` *M3 node types:* ``cache.m3.medium`` , ``cache.m3.large`` , ``cache.m3.xlarge`` , ``cache.m3.2xlarge`` - Compute optimized: - Previous generation: (not recommended) *C1 node types:* ``cache.c1.xlarge`` - Memory optimized: - Current generation: *R6gd node types:* ``cache.r6gd.xlarge`` , ``cache.r6gd.2xlarge`` , ``cache.r6gd.4xlarge`` , ``cache.r6gd.8xlarge`` , ``cache.r6gd.12xlarge`` , ``cache.r6gd.16xlarge`` .. epigraph:: The ``r6gd`` family is available in the following regions: ``us-east-2`` , ``us-east-1`` , ``us-west-2`` , ``us-west-1`` , ``eu-west-1`` , ``eu-central-1`` , ``ap-northeast-1`` , ``ap-southeast-1`` , ``ap-southeast-2`` . *R6g node types:* ``cache.r6g.large`` , ``cache.r6g.xlarge`` , ``cache.r6g.2xlarge`` , ``cache.r6g.4xlarge`` , ``cache.r6g.12xlarge`` , ``cache.r6g.24xlarge`` *R5 node types:* ``cache.r5.large`` , ``cache.r5.xlarge`` , ``cache.r5.2xlarge`` , ``cache.r5.4xlarge`` , ``cache.r5.12xlarge`` , ``cache.r5.24xlarge`` *R4 node types:* ``cache.r4.large`` , ``cache.r4.xlarge`` , ``cache.r4.2xlarge`` , ``cache.r4.4xlarge`` , ``cache.r4.8xlarge`` , ``cache.r4.16xlarge`` - Previous generation: (not recommended) *M2 node types:* ``cache.m2.xlarge`` , ``cache.m2.2xlarge`` , ``cache.m2.4xlarge`` *R3 node types:* ``cache.r3.large`` , ``cache.r3.xlarge`` , ``cache.r3.2xlarge`` , ``cache.r3.4xlarge`` , ``cache.r3.8xlarge`` For region availability, see `Supported Node Types by Amazon Region <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion>`_
-        :param cache_parameter_group_name: The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used. If you are running Redis version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name. - To create a Redis (cluster mode disabled) replication group, use ``CacheParameterGroupName=default.redis3.2`` . - To create a Redis (cluster mode enabled) replication group, use ``CacheParameterGroupName=default.redis3.2.cluster.on`` .
+        :param cache_parameter_group_name: The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used. If you are running Redis OSS version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name. - To create a Redis OSS (cluster mode disabled) replication group, use ``CacheParameterGroupName=default.redis3.2`` . - To create a Redis OSS (cluster mode enabled) replication group, use ``CacheParameterGroupName=default.redis3.2.cluster.on`` .
         :param cache_security_group_names: A list of cache security group names to associate with this replication group.
         :param cache_subnet_group_name: The name of the cache subnet group to be used for the replication group. .. epigraph:: If you're going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see `AWS::ElastiCache::SubnetGroup <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-subnetgroup.html>`_ .
-        :param cluster_mode: Enabled or Disabled. To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see `Modify cluster mode <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/modify-cluster-mode.html>`_ .
+        :param cluster_mode: Enabled or Disabled. To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis OSS clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis OSS clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see `Modify cluster mode <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/modify-cluster-mode.html>`_ .
         :param data_tiering_enabled: Enables data tiering. Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see `Data tiering <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/data-tiering.html>`_ .
         :param engine: The name of the cache engine to be used for the clusters in this replication group. The value must be set to ``Redis`` .
         :param engine_version: The version number of the cache engine to be used for the clusters in this replication group. To view the supported cache engine versions, use the ``DescribeCacheEngineVersions`` operation. *Important:* You can upgrade to a newer engine version (see `Selecting a Cache Engine and Version <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/SelectEngine.html#VersionManagement>`_ ) in the *ElastiCache User Guide* , but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.
         :param global_replication_group_id: The name of the Global datastore.
-        :param ip_discovery: The network type you choose when creating a replication group, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param ip_discovery: The network type you choose when creating a replication group, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
         :param kms_key_id: The ID of the KMS key used to encrypt the disk on the cluster.
         :param log_delivery_configurations: Specifies the destination, format and type of the logs.
         :param multi_az_enabled: A flag indicating if you have Multi-AZ enabled to enhance fault tolerance. For more information, see `Minimizing Downtime: Multi-AZ <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/AutoFailover.html>`_ .
-        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
-        :param node_group_configuration: ``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis cluster node group. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NodeGroupConfiguration`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NodeGroupConfiguration`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
+        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param node_group_configuration: ``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NodeGroupConfiguration`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NodeGroupConfiguration`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
         :param notification_topic_arn: The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent. .. epigraph:: The Amazon SNS topic owner must be the same as the cluster owner.
         :param num_cache_clusters: The number of clusters this replication group initially has. This parameter is not used if there is more than one node group (shard). You should use ``ReplicasPerNodeGroup`` instead. If ``AutomaticFailoverEnabled`` is ``true`` , the value of this parameter must be at least 2. If ``AutomaticFailoverEnabled`` is ``false`` you can omit this parameter (it will default to 1), or you can explicitly set it to a value between 2 and 6. The maximum permitted value for ``NumCacheClusters`` is 6 (1 primary plus 5 replicas).
-        :param num_node_groups: An optional parameter that specifies the number of node groups (shards) for this Redis (cluster mode enabled) replication group. For Redis (cluster mode disabled) either omit this parameter or set it to 1. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NumNodeGroups`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NumNodeGroups`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ . Default: 1
+        :param num_node_groups: An optional parameter that specifies the number of node groups (shards) for this Redis OSS (cluster mode enabled) replication group. For Redis OSS (cluster mode disabled) either omit this parameter or set it to 1. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NumNodeGroups`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NumNodeGroups`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ . Default: 1
         :param port: The port number on which each member of the replication group accepts connections.
         :param preferred_cache_cluster_a_zs: A list of EC2 Availability Zones in which the replication group's clusters are created. The order of the Availability Zones in the list is the order in which clusters are allocated. The primary cluster is created in the first AZ in the list. This parameter is not used if there is more than one node group (shard). You should use ``NodeGroupConfiguration`` instead. .. epigraph:: If you are creating your replication group in an Amazon VPC (recommended), you can only locate clusters in Availability Zones associated with the subnets in the selected subnet group. The number of Availability Zones listed must equal the value of ``NumCacheClusters`` . Default: system chosen Availability Zones.
         :param preferred_maintenance_window: Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ``ddd`` are: - ``sun`` - ``mon`` - ``tue`` - ``wed`` - ``thu`` - ``fri`` - ``sat`` Example: ``sun:23:00-mon:01:30``
@@ -2830,14 +2822,14 @@ class CfnReplicationGroup(
         :param replicas_per_node_group: An optional parameter that specifies the number of replica nodes in each node group (shard). Valid values are 0 to 5.
         :param replication_group_id: The replication group identifier. This parameter is stored as a lowercase string. Constraints: - A name must contain from 1 to 40 alphanumeric characters or hyphens. - The first character must be a letter. - A name cannot end with a hyphen or contain two consecutive hyphens.
         :param security_group_ids: One or more Amazon VPC security groups associated with this replication group. Use this parameter only when you are creating a replication group in an Amazon Virtual Private Cloud (Amazon VPC).
-        :param snapshot_arns: A list of Amazon Resource Names (ARN) that uniquely identify the Redis RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter *NumNodeGroups* or the number of node groups configured by *NodeGroupConfiguration* regardless of the number of ARNs specified here. Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
+        :param snapshot_arns: A list of Amazon Resource Names (ARN) that uniquely identify the Redis OSS RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter *NumNodeGroups* or the number of node groups configured by *NodeGroupConfiguration* regardless of the number of ARNs specified here. Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
         :param snapshot_name: The name of a snapshot from which to restore data into the new replication group. The snapshot status changes to ``restoring`` while the new replication group is being created.
         :param snapshot_retention_limit: The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set ``SnapshotRetentionLimit`` to 5, a snapshot that was taken today is retained for 5 days before being deleted. Default: 0 (i.e., automatic backups are disabled for this cluster).
-        :param snapshotting_cluster_id: The cluster ID that is used as the daily snapshot source for the replication group. This parameter cannot be set for Redis (cluster mode enabled) replication groups.
+        :param snapshotting_cluster_id: The cluster ID that is used as the daily snapshot source for the replication group. This parameter cannot be set for Redis OSS (cluster mode enabled) replication groups.
         :param snapshot_window: The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard). Example: ``05:00-09:00`` If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range.
         :param tags: A list of tags to be added to this resource. Tags are comma-separated key,value pairs (e.g. Key= ``myKey`` , Value= ``myKeyValue`` . You can include multiple tags as shown following: Key= ``myKey`` , Value= ``myKeyValue`` Key= ``mySecondKey`` , Value= ``mySecondKeyValue`` . Tags on replication groups will be replicated to all nodes.
-        :param transit_encryption_enabled: A flag that enables in-transit encryption when set to ``true`` . You cannot modify the value of ``TransitEncryptionEnabled`` after the cluster is created. To enable in-transit encryption on a cluster you must set ``TransitEncryptionEnabled`` to ``true`` when you create a cluster. This parameter is valid only if the ``Engine`` parameter is ``redis`` , the ``EngineVersion`` parameter is ``3.2.6`` or ``4.x`` onward, and the cluster is being created in an Amazon VPC. If you enable in-transit encryption, you must also specify a value for ``CacheSubnetGroup`` . *Required:* Only available when creating a replication group in an Amazon VPC using redis version ``3.2.6`` or ``4.x`` onward. Default: ``false`` .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` .
-        :param transit_encryption_mode: A setting that allows you to migrate your clients to use in-transit encryption, with no downtime. When setting ``TransitEncryptionEnabled`` to ``true`` , you can set your ``TransitEncryptionMode`` to ``preferred`` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis clients to use encrypted connections you can modify the value to ``required`` to allow encrypted connections only. Setting ``TransitEncryptionMode`` to ``required`` is a two-step process that requires you to first set the ``TransitEncryptionMode`` to ``preferred`` , after that you can set ``TransitEncryptionMode`` to ``required`` . This process will not trigger the replacement of the replication group.
+        :param transit_encryption_enabled: A flag that enables in-transit encryption when set to ``true`` . You cannot modify the value of ``TransitEncryptionEnabled`` after the cluster is created. To enable in-transit encryption on a cluster you must set ``TransitEncryptionEnabled`` to ``true`` when you create a cluster. This parameter is valid only if the ``Engine`` parameter is ``redis`` , the ``EngineVersion`` parameter is ``3.2.6`` or ``4.x`` onward, and the cluster is being created in an Amazon VPC. If you enable in-transit encryption, you must also specify a value for ``CacheSubnetGroup`` . *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version ``3.2.6`` or ``4.x`` onward. Default: ``false`` .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` .
+        :param transit_encryption_mode: A setting that allows you to migrate your clients to use in-transit encryption, with no downtime. When setting ``TransitEncryptionEnabled`` to ``true`` , you can set your ``TransitEncryptionMode`` to ``preferred`` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis OSS clients to use encrypted connections you can modify the value to ``required`` to allow encrypted connections only. Setting ``TransitEncryptionMode`` to ``required`` is a two-step process that requires you to first set the ``TransitEncryptionMode`` to ``preferred`` , after that you can set ``TransitEncryptionMode`` to ``required`` . This process will not trigger the replacement of the replication group.
         :param user_group_ids: The ID of user group to associate with the replication group.
         '''
         if __debug__:
@@ -2925,7 +2917,7 @@ class CfnReplicationGroup(
 
         .. epigraph::
 
-           Redis (cluster mode disabled) replication groups don't have this attribute. Therefore, ``Fn::GetAtt`` returns a value for this attribute only if the replication group is clustered. Otherwise, ``Fn::GetAtt`` fails. For Redis (cluster mode disabled) replication groups, use the ``PrimaryEndpoint`` or ``ReadEndpoint`` attributes.
+           Redis OSS (cluster mode disabled) replication groups don't have this attribute. Therefore, ``Fn::GetAtt`` returns a value for this attribute only if the replication group is clustered. Otherwise, ``Fn::GetAtt`` fails. For Redis OSS (cluster mode disabled) replication groups, use the ``PrimaryEndpoint`` or ``ReadEndpoint`` attributes.
 
         :cloudformationAttribute: ConfigurationEndPoint.Address
         '''
@@ -3042,7 +3034,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c907ced1d032518ebc8883a36eb0edf181bc2da76408e75eb584c864b5fefc9a)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "replicationGroupDescription", value)
+        jsii.set(self, "replicationGroupDescription", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="atRestEncryptionEnabled")
@@ -3060,7 +3052,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__aa546aa730ad1a4db1a42606474b6045ffc32ec777b50d6ba31f3dbdab3a48df)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "atRestEncryptionEnabled", value)
+        jsii.set(self, "atRestEncryptionEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="authToken")
@@ -3073,7 +3065,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ea5f85de07d00909dedcebd441b02e117efc2077a1e3d87f54c5a27f5206a2f5)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "authToken", value)
+        jsii.set(self, "authToken", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="automaticFailoverEnabled")
@@ -3091,14 +3083,14 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b966eb1df615199d14bbc7fd9f3b39c9f4709837783a9a97f8945e6c623dc56d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "automaticFailoverEnabled", value)
+        jsii.set(self, "automaticFailoverEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="autoMinorVersionUpgrade")
     def auto_minor_version_upgrade(
         self,
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
-        '''If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.'''
+        '''If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.'''
         return typing.cast(typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]], jsii.get(self, "autoMinorVersionUpgrade"))
 
     @auto_minor_version_upgrade.setter
@@ -3109,7 +3101,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__86b4cffb8c5e43d27133f190ebeba6d314ad935e730a8628bef824306d4d6356)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "autoMinorVersionUpgrade", value)
+        jsii.set(self, "autoMinorVersionUpgrade", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheNodeType")
@@ -3122,7 +3114,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ed33482a5f3a397014d26a736ced8371cfd5f7dcf12071c4629c9100b4d0c3cc)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheNodeType", value)
+        jsii.set(self, "cacheNodeType", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheParameterGroupName")
@@ -3135,7 +3127,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__62c80def577fbbf2efb0e92fb3bd6946c8ffca559bbc2222843991c0c59a8e05)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheParameterGroupName", value)
+        jsii.set(self, "cacheParameterGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheSecurityGroupNames")
@@ -3151,7 +3143,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__a35e383106650eefc6c3b806779d5aa3ad36ed505bd7313e11d94c5942d9c7b1)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheSecurityGroupNames", value)
+        jsii.set(self, "cacheSecurityGroupNames", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheSubnetGroupName")
@@ -3164,7 +3156,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__15b7e9b4af342ce71884b10c5713679cc1987727399ee466ef6c6e86653dcb21)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheSubnetGroupName", value)
+        jsii.set(self, "cacheSubnetGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="clusterMode")
@@ -3177,7 +3169,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__843c2d711df69b9b78c5297321a7377fd4d364b0b8b228ae665fcbdffa0084f2)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "clusterMode", value)
+        jsii.set(self, "clusterMode", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="dataTieringEnabled")
@@ -3195,7 +3187,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__a4366a0fcdd44e261b8f1399689f3ac4bb635223727a5c70ecced2835cb18c15)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "dataTieringEnabled", value)
+        jsii.set(self, "dataTieringEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="engine")
@@ -3208,7 +3200,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__43efae7f07eb2d768b51436a460dd83ae934b30a7e7cc3f3b825cfd6e5ece68d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engine", value)
+        jsii.set(self, "engine", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="engineVersion")
@@ -3221,7 +3213,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__5337b37fc62ed19c046ae6e4e85b8fe97cdcd4eb2fd571decbfe563e2f9bbcf5)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engineVersion", value)
+        jsii.set(self, "engineVersion", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="globalReplicationGroupId")
@@ -3234,7 +3226,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__bf74e5c2399e48c43d257f5ef3f61c24fce45668db9e5f6d537ce076f935f780)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "globalReplicationGroupId", value)
+        jsii.set(self, "globalReplicationGroupId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="ipDiscovery")
@@ -3247,7 +3239,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__ea227ab737c3768eb9268ca4b7aad2a651bd5c80b060dd89e792f94c91fce7f1)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "ipDiscovery", value)
+        jsii.set(self, "ipDiscovery", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="kmsKeyId")
@@ -3260,7 +3252,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__2dda541c47a7be91143fbe227b05e172ef4b46d5657366c1ffff09fbb9c0c5c7)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "kmsKeyId", value)
+        jsii.set(self, "kmsKeyId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="logDeliveryConfigurations")
@@ -3278,7 +3270,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c6abdf1dfe7ce2cb6bd74fcf5e71f8d01354d2ebe730f2f8811c7cca3c29115c)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "logDeliveryConfigurations", value)
+        jsii.set(self, "logDeliveryConfigurations", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="multiAzEnabled")
@@ -3296,7 +3288,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__45ea9e8732e19a78795fe185be2450c918f0ad9505938ce18be98a47595e698f)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "multiAzEnabled", value)
+        jsii.set(self, "multiAzEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="networkType")
@@ -3309,14 +3301,14 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__83454ca7ec99c5872b43df5ecd3a494e042cd44f7b50d58f4bf1e6e8b660215d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "networkType", value)
+        jsii.set(self, "networkType", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="nodeGroupConfiguration")
     def node_group_configuration(
         self,
     ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, "CfnReplicationGroup.NodeGroupConfigurationProperty"]]]]:
-        '''``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis cluster node group.'''
+        '''``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group.'''
         return typing.cast(typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, "CfnReplicationGroup.NodeGroupConfigurationProperty"]]]], jsii.get(self, "nodeGroupConfiguration"))
 
     @node_group_configuration.setter
@@ -3327,7 +3319,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__063232de740d4c4cf752ba9532e0b046f204c4d85a17ea560f3688d5c78d5126)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "nodeGroupConfiguration", value)
+        jsii.set(self, "nodeGroupConfiguration", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="notificationTopicArn")
@@ -3340,7 +3332,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__afad0ef82bb9acf280293dc8234bcbfb68b0aee8e38631e29e8b0f5c0edf6436)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "notificationTopicArn", value)
+        jsii.set(self, "notificationTopicArn", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="numCacheClusters")
@@ -3353,12 +3345,12 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__3effd0ee3abc632945998cd5c58c40c2e61c166d48aeaff02c46cb4fe172fa68)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "numCacheClusters", value)
+        jsii.set(self, "numCacheClusters", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="numNodeGroups")
     def num_node_groups(self) -> typing.Optional[jsii.Number]:
-        '''An optional parameter that specifies the number of node groups (shards) for this Redis (cluster mode enabled) replication group.'''
+        '''An optional parameter that specifies the number of node groups (shards) for this Redis OSS (cluster mode enabled) replication group.'''
         return typing.cast(typing.Optional[jsii.Number], jsii.get(self, "numNodeGroups"))
 
     @num_node_groups.setter
@@ -3366,7 +3358,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__06693a02af2ea54d169b325b01dbc6b4f0fac1ded78e060c7120b709bf82ffd1)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "numNodeGroups", value)
+        jsii.set(self, "numNodeGroups", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="port")
@@ -3379,7 +3371,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b77a4995911ee86ef96fab9b8d7683bd6b21726901334b6e0f5b1cd65c358352)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "port", value)
+        jsii.set(self, "port", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="preferredCacheClusterAZs")
@@ -3397,7 +3389,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f3b98acbb3854c5584ac0d1b3f958aaab9acda203560a42576b7da590dd3efbb)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "preferredCacheClusterAZs", value)
+        jsii.set(self, "preferredCacheClusterAZs", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="preferredMaintenanceWindow")
@@ -3413,7 +3405,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__5f06ffee046ee6aaf7c317d0ec481f014335323a835adf240ab1d537b192e36e)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "preferredMaintenanceWindow", value)
+        jsii.set(self, "preferredMaintenanceWindow", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="primaryClusterId")
@@ -3426,7 +3418,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__6512d6a9d409265e09a0a87e261fcba517621c20846549f6b30152801b2e3dee)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "primaryClusterId", value)
+        jsii.set(self, "primaryClusterId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="replicasPerNodeGroup")
@@ -3439,7 +3431,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__7cf71395d4de3cd4ca74d713e8070b525f88cd095892c0b97826bec127eea35d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "replicasPerNodeGroup", value)
+        jsii.set(self, "replicasPerNodeGroup", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="replicationGroupId")
@@ -3455,7 +3447,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__5e382d1b245c43974606107b80af8da9323e7d5a4ec30a874e85fd0d8383a979)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "replicationGroupId", value)
+        jsii.set(self, "replicationGroupId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="securityGroupIds")
@@ -3471,12 +3463,12 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f4bf0b926d5ed122589bca93144684bbbc765d5b48d2b43dc65e20ac75999870)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "securityGroupIds", value)
+        jsii.set(self, "securityGroupIds", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotArns")
     def snapshot_arns(self) -> typing.Optional[typing.List[builtins.str]]:
-        '''A list of Amazon Resource Names (ARN) that uniquely identify the Redis RDB snapshot files stored in Amazon S3.'''
+        '''A list of Amazon Resource Names (ARN) that uniquely identify the Redis OSS RDB snapshot files stored in Amazon S3.'''
         return typing.cast(typing.Optional[typing.List[builtins.str]], jsii.get(self, "snapshotArns"))
 
     @snapshot_arns.setter
@@ -3484,7 +3476,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__402bbedebe63e1639250243d98564e9d2abaf2ea4be044a6e822afb9573ba83b)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotArns", value)
+        jsii.set(self, "snapshotArns", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotName")
@@ -3497,7 +3489,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__cf64b55611f1dcd1385926cc1344d345fe6bb1210d40fc47034fe65bbdb3da34)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotName", value)
+        jsii.set(self, "snapshotName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotRetentionLimit")
@@ -3510,7 +3502,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__9ca3b912d486d6471befbdcc0a4f6371d9c6d4fce14489c5c146523f37b67d03)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotRetentionLimit", value)
+        jsii.set(self, "snapshotRetentionLimit", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshottingClusterId")
@@ -3523,7 +3515,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__04e859b223e2f5a28ae2572ed09bf8cef9bbf00ed7571a437a364307bc63f338)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshottingClusterId", value)
+        jsii.set(self, "snapshottingClusterId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotWindow")
@@ -3536,7 +3528,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__7eca3a583f11466198815da8e0f733144c677e601f7fbc08ff2f53b0f251ce1c)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotWindow", value)
+        jsii.set(self, "snapshotWindow", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -3549,7 +3541,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__dd34df081f3adeec74e0b10c42a2c6579d5328d707ac88af6a4c22338f3c9035)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="transitEncryptionEnabled")
@@ -3567,7 +3559,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__4af0273d0b69e8bd3f65054f8d56651f1f9d315c9e60fa092dd4b8e4e8844e85)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "transitEncryptionEnabled", value)
+        jsii.set(self, "transitEncryptionEnabled", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="transitEncryptionMode")
@@ -3580,7 +3572,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__e42c150539724e50fcb5c3e35f3cc6d260890eb3e8dedeaaac606a9539b75a56)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "transitEncryptionMode", value)
+        jsii.set(self, "transitEncryptionMode", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="userGroupIds")
@@ -3593,7 +3585,7 @@ class CfnReplicationGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__52e181f655740159c1c7f60264045e188418edbe6d092594dbf15cce26263f01)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "userGroupIds", value)
+        jsii.set(self, "userGroupIds", value) # pyright: ignore[reportArgumentType]
 
     @jsii.data_type(
         jsii_type="aws-cdk-lib.aws_elasticache.CfnReplicationGroup.CloudWatchLogsDestinationDetailsProperty",
@@ -3926,9 +3918,9 @@ class CfnReplicationGroup(
             replica_count: typing.Optional[jsii.Number] = None,
             slots: typing.Optional[builtins.str] = None,
         ) -> None:
-            '''``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis cluster node group.
+            '''``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group.
 
-            :param node_group_id: Either the ElastiCache for Redis supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
+            :param node_group_id: Either the ElastiCache (Redis OSS) supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
             :param primary_availability_zone: The Availability Zone where the primary node of this node group (shard) is launched.
             :param replica_availability_zones: A list of Availability Zones to be used for the read replicas. The number of Availability Zones in this list must match the value of ``ReplicaCount`` or ``ReplicasPerNodeGroup`` if not specified.
             :param replica_count: The number of read replica nodes in this node group (shard).
@@ -3972,7 +3964,7 @@ class CfnReplicationGroup(
 
         @builtins.property
         def node_group_id(self) -> typing.Optional[builtins.str]:
-            '''Either the ElastiCache for Redis supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
+            '''Either the ElastiCache (Redis OSS) supplied 4-digit id or a user supplied id for the node group these configuration values apply to.
 
             :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-replicationgroup-nodegroupconfiguration.html#cfn-elasticache-replicationgroup-nodegroupconfiguration-nodegroupid
             '''
@@ -4129,28 +4121,28 @@ class CfnReplicationGroupProps:
         '''Properties for defining a ``CfnReplicationGroup``.
 
         :param replication_group_description: A user-created description for the replication group.
-        :param at_rest_encryption_enabled: A flag that enables encryption at rest when set to ``true`` . You cannot modify the value of ``AtRestEncryptionEnabled`` after the replication group is created. To enable encryption at rest on a replication group you must set ``AtRestEncryptionEnabled`` to ``true`` when you create the replication group. *Required:* Only available when creating a replication group in an Amazon VPC using redis version ``3.2.6`` or ``4.x`` onward. Default: ``false``
-        :param auth_token: *Reserved parameter.* The password used to access a password protected server. ``AuthToken`` can be specified only on replication groups where ``TransitEncryptionEnabled`` is ``true`` . For more information, see `Authenticating Users with the Redis AUTH Command <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/auth.html>`_ . .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` . Password constraints: - Must be only printable ASCII characters. - Must be at least 16 characters and no more than 128 characters in length. - Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ). For more information, see `AUTH password <https://docs.aws.amazon.com/http://redis.io/commands/AUTH>`_ at http://redis.io/commands/AUTH. .. epigraph:: If ADDING the AuthToken, update requires `Replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
-        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis (cluster mode enabled) replication groups. Default: false
-        :param auto_minor_version_upgrade: If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+        :param at_rest_encryption_enabled: A flag that enables encryption at rest when set to ``true`` . You cannot modify the value of ``AtRestEncryptionEnabled`` after the replication group is created. To enable encryption at rest on a replication group you must set ``AtRestEncryptionEnabled`` to ``true`` when you create the replication group. *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version ``3.2.6`` or ``4.x`` onward. Default: ``false``
+        :param auth_token: *Reserved parameter.* The password used to access a password protected server. ``AuthToken`` can be specified only on replication groups where ``TransitEncryptionEnabled`` is ``true`` . For more information, see `Authenticating Users with the Redis OSS AUTH Command <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/auth.html>`_ . .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` . Password constraints: - Must be only printable ASCII characters. - Must be at least 16 characters and no more than 128 characters in length. - Nonalphanumeric characters are restricted to (!, &, #, $, ^, <, >, -, ). For more information, see `AUTH password <https://docs.aws.amazon.com/http://redis.io/commands/AUTH>`_ at http://redis.io/commands/AUTH. .. epigraph:: If ADDING the AuthToken, update requires `Replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
+        :param automatic_failover_enabled: Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails. ``AutomaticFailoverEnabled`` must be enabled for Redis OSS (cluster mode enabled) replication groups. Default: false
+        :param auto_minor_version_upgrade: If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
         :param cache_node_type: The compute and memory capacity of the nodes in the node group (shard). The following node types are supported by ElastiCache. Generally speaking, the current generation types provide more memory and computational power at lower cost when compared to their equivalent previous generation counterparts. - General purpose: - Current generation: *M6g node types:* ``cache.m6g.large`` , ``cache.m6g.xlarge`` , ``cache.m6g.2xlarge`` , ``cache.m6g.4xlarge`` , ``cache.m6g.12xlarge`` , ``cache.m6g.24xlarge`` *M5 node types:* ``cache.m5.large`` , ``cache.m5.xlarge`` , ``cache.m5.2xlarge`` , ``cache.m5.4xlarge`` , ``cache.m5.12xlarge`` , ``cache.m5.24xlarge`` *M4 node types:* ``cache.m4.large`` , ``cache.m4.xlarge`` , ``cache.m4.2xlarge`` , ``cache.m4.4xlarge`` , ``cache.m4.10xlarge`` *T4g node types:* ``cache.t4g.micro`` , ``cache.t4g.small`` , ``cache.t4g.medium`` *T3 node types:* ``cache.t3.micro`` , ``cache.t3.small`` , ``cache.t3.medium`` *T2 node types:* ``cache.t2.micro`` , ``cache.t2.small`` , ``cache.t2.medium`` - Previous generation: (not recommended) *T1 node types:* ``cache.t1.micro`` *M1 node types:* ``cache.m1.small`` , ``cache.m1.medium`` , ``cache.m1.large`` , ``cache.m1.xlarge`` *M3 node types:* ``cache.m3.medium`` , ``cache.m3.large`` , ``cache.m3.xlarge`` , ``cache.m3.2xlarge`` - Compute optimized: - Previous generation: (not recommended) *C1 node types:* ``cache.c1.xlarge`` - Memory optimized: - Current generation: *R6gd node types:* ``cache.r6gd.xlarge`` , ``cache.r6gd.2xlarge`` , ``cache.r6gd.4xlarge`` , ``cache.r6gd.8xlarge`` , ``cache.r6gd.12xlarge`` , ``cache.r6gd.16xlarge`` .. epigraph:: The ``r6gd`` family is available in the following regions: ``us-east-2`` , ``us-east-1`` , ``us-west-2`` , ``us-west-1`` , ``eu-west-1`` , ``eu-central-1`` , ``ap-northeast-1`` , ``ap-southeast-1`` , ``ap-southeast-2`` . *R6g node types:* ``cache.r6g.large`` , ``cache.r6g.xlarge`` , ``cache.r6g.2xlarge`` , ``cache.r6g.4xlarge`` , ``cache.r6g.12xlarge`` , ``cache.r6g.24xlarge`` *R5 node types:* ``cache.r5.large`` , ``cache.r5.xlarge`` , ``cache.r5.2xlarge`` , ``cache.r5.4xlarge`` , ``cache.r5.12xlarge`` , ``cache.r5.24xlarge`` *R4 node types:* ``cache.r4.large`` , ``cache.r4.xlarge`` , ``cache.r4.2xlarge`` , ``cache.r4.4xlarge`` , ``cache.r4.8xlarge`` , ``cache.r4.16xlarge`` - Previous generation: (not recommended) *M2 node types:* ``cache.m2.xlarge`` , ``cache.m2.2xlarge`` , ``cache.m2.4xlarge`` *R3 node types:* ``cache.r3.large`` , ``cache.r3.xlarge`` , ``cache.r3.2xlarge`` , ``cache.r3.4xlarge`` , ``cache.r3.8xlarge`` For region availability, see `Supported Node Types by Amazon Region <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/CacheNodes.SupportedTypes.html#CacheNodes.SupportedTypesByRegion>`_
-        :param cache_parameter_group_name: The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used. If you are running Redis version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name. - To create a Redis (cluster mode disabled) replication group, use ``CacheParameterGroupName=default.redis3.2`` . - To create a Redis (cluster mode enabled) replication group, use ``CacheParameterGroupName=default.redis3.2.cluster.on`` .
+        :param cache_parameter_group_name: The name of the parameter group to associate with this replication group. If this argument is omitted, the default cache parameter group for the specified engine is used. If you are running Redis OSS version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name. - To create a Redis OSS (cluster mode disabled) replication group, use ``CacheParameterGroupName=default.redis3.2`` . - To create a Redis OSS (cluster mode enabled) replication group, use ``CacheParameterGroupName=default.redis3.2.cluster.on`` .
         :param cache_security_group_names: A list of cache security group names to associate with this replication group.
         :param cache_subnet_group_name: The name of the cache subnet group to be used for the replication group. .. epigraph:: If you're going to launch your cluster in an Amazon VPC, you need to create a subnet group before you start creating a cluster. For more information, see `AWS::ElastiCache::SubnetGroup <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-elasticache-subnetgroup.html>`_ .
-        :param cluster_mode: Enabled or Disabled. To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see `Modify cluster mode <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/modify-cluster-mode.html>`_ .
+        :param cluster_mode: Enabled or Disabled. To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis OSS clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis OSS clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see `Modify cluster mode <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/modify-cluster-mode.html>`_ .
         :param data_tiering_enabled: Enables data tiering. Data tiering is only supported for replication groups using the r6gd node type. This parameter must be set to true when using r6gd nodes. For more information, see `Data tiering <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/data-tiering.html>`_ .
         :param engine: The name of the cache engine to be used for the clusters in this replication group. The value must be set to ``Redis`` .
         :param engine_version: The version number of the cache engine to be used for the clusters in this replication group. To view the supported cache engine versions, use the ``DescribeCacheEngineVersions`` operation. *Important:* You can upgrade to a newer engine version (see `Selecting a Cache Engine and Version <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/SelectEngine.html#VersionManagement>`_ ) in the *ElastiCache User Guide* , but you cannot downgrade to an earlier engine version. If you want to use an earlier engine version, you must delete the existing cluster or replication group and create it anew with the earlier engine version.
         :param global_replication_group_id: The name of the Global datastore.
-        :param ip_discovery: The network type you choose when creating a replication group, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param ip_discovery: The network type you choose when creating a replication group, either ``ipv4`` | ``ipv6`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
         :param kms_key_id: The ID of the KMS key used to encrypt the disk on the cluster.
         :param log_delivery_configurations: Specifies the destination, format and type of the logs.
         :param multi_az_enabled: A flag indicating if you have Multi-AZ enabled to enhance fault tolerance. For more information, see `Minimizing Downtime: Multi-AZ <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/AutoFailover.html>`_ .
-        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
-        :param node_group_configuration: ``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis cluster node group. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NodeGroupConfiguration`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NodeGroupConfiguration`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
+        :param network_type: Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` . IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        :param node_group_configuration: ``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NodeGroupConfiguration`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NodeGroupConfiguration`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
         :param notification_topic_arn: The Amazon Resource Name (ARN) of the Amazon Simple Notification Service (SNS) topic to which notifications are sent. .. epigraph:: The Amazon SNS topic owner must be the same as the cluster owner.
         :param num_cache_clusters: The number of clusters this replication group initially has. This parameter is not used if there is more than one node group (shard). You should use ``ReplicasPerNodeGroup`` instead. If ``AutomaticFailoverEnabled`` is ``true`` , the value of this parameter must be at least 2. If ``AutomaticFailoverEnabled`` is ``false`` you can omit this parameter (it will default to 1), or you can explicitly set it to a value between 2 and 6. The maximum permitted value for ``NumCacheClusters`` is 6 (1 primary plus 5 replicas).
-        :param num_node_groups: An optional parameter that specifies the number of node groups (shards) for this Redis (cluster mode enabled) replication group. For Redis (cluster mode disabled) either omit this parameter or set it to 1. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NumNodeGroups`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NumNodeGroups`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ . Default: 1
+        :param num_node_groups: An optional parameter that specifies the number of node groups (shards) for this Redis OSS (cluster mode enabled) replication group. For Redis OSS (cluster mode disabled) either omit this parameter or set it to 1. If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NumNodeGroups`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NumNodeGroups`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ . Default: 1
         :param port: The port number on which each member of the replication group accepts connections.
         :param preferred_cache_cluster_a_zs: A list of EC2 Availability Zones in which the replication group's clusters are created. The order of the Availability Zones in the list is the order in which clusters are allocated. The primary cluster is created in the first AZ in the list. This parameter is not used if there is more than one node group (shard). You should use ``NodeGroupConfiguration`` instead. .. epigraph:: If you are creating your replication group in an Amazon VPC (recommended), you can only locate clusters in Availability Zones associated with the subnets in the selected subnet group. The number of Availability Zones listed must equal the value of ``NumCacheClusters`` . Default: system chosen Availability Zones.
         :param preferred_maintenance_window: Specifies the weekly time range during which maintenance on the cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ``ddd`` are: - ``sun`` - ``mon`` - ``tue`` - ``wed`` - ``thu`` - ``fri`` - ``sat`` Example: ``sun:23:00-mon:01:30``
@@ -4158,14 +4150,14 @@ class CfnReplicationGroupProps:
         :param replicas_per_node_group: An optional parameter that specifies the number of replica nodes in each node group (shard). Valid values are 0 to 5.
         :param replication_group_id: The replication group identifier. This parameter is stored as a lowercase string. Constraints: - A name must contain from 1 to 40 alphanumeric characters or hyphens. - The first character must be a letter. - A name cannot end with a hyphen or contain two consecutive hyphens.
         :param security_group_ids: One or more Amazon VPC security groups associated with this replication group. Use this parameter only when you are creating a replication group in an Amazon Virtual Private Cloud (Amazon VPC).
-        :param snapshot_arns: A list of Amazon Resource Names (ARN) that uniquely identify the Redis RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter *NumNodeGroups* or the number of node groups configured by *NodeGroupConfiguration* regardless of the number of ARNs specified here. Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
+        :param snapshot_arns: A list of Amazon Resource Names (ARN) that uniquely identify the Redis OSS RDB snapshot files stored in Amazon S3. The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter *NumNodeGroups* or the number of node groups configured by *NodeGroupConfiguration* regardless of the number of ARNs specified here. Example of an Amazon S3 ARN: ``arn:aws:s3:::my_bucket/snapshot1.rdb``
         :param snapshot_name: The name of a snapshot from which to restore data into the new replication group. The snapshot status changes to ``restoring`` while the new replication group is being created.
         :param snapshot_retention_limit: The number of days for which ElastiCache retains automatic snapshots before deleting them. For example, if you set ``SnapshotRetentionLimit`` to 5, a snapshot that was taken today is retained for 5 days before being deleted. Default: 0 (i.e., automatic backups are disabled for this cluster).
-        :param snapshotting_cluster_id: The cluster ID that is used as the daily snapshot source for the replication group. This parameter cannot be set for Redis (cluster mode enabled) replication groups.
+        :param snapshotting_cluster_id: The cluster ID that is used as the daily snapshot source for the replication group. This parameter cannot be set for Redis OSS (cluster mode enabled) replication groups.
         :param snapshot_window: The daily time range (in UTC) during which ElastiCache begins taking a daily snapshot of your node group (shard). Example: ``05:00-09:00`` If you do not specify this parameter, ElastiCache automatically chooses an appropriate time range.
         :param tags: A list of tags to be added to this resource. Tags are comma-separated key,value pairs (e.g. Key= ``myKey`` , Value= ``myKeyValue`` . You can include multiple tags as shown following: Key= ``myKey`` , Value= ``myKeyValue`` Key= ``mySecondKey`` , Value= ``mySecondKeyValue`` . Tags on replication groups will be replicated to all nodes.
-        :param transit_encryption_enabled: A flag that enables in-transit encryption when set to ``true`` . You cannot modify the value of ``TransitEncryptionEnabled`` after the cluster is created. To enable in-transit encryption on a cluster you must set ``TransitEncryptionEnabled`` to ``true`` when you create a cluster. This parameter is valid only if the ``Engine`` parameter is ``redis`` , the ``EngineVersion`` parameter is ``3.2.6`` or ``4.x`` onward, and the cluster is being created in an Amazon VPC. If you enable in-transit encryption, you must also specify a value for ``CacheSubnetGroup`` . *Required:* Only available when creating a replication group in an Amazon VPC using redis version ``3.2.6`` or ``4.x`` onward. Default: ``false`` .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` .
-        :param transit_encryption_mode: A setting that allows you to migrate your clients to use in-transit encryption, with no downtime. When setting ``TransitEncryptionEnabled`` to ``true`` , you can set your ``TransitEncryptionMode`` to ``preferred`` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis clients to use encrypted connections you can modify the value to ``required`` to allow encrypted connections only. Setting ``TransitEncryptionMode`` to ``required`` is a two-step process that requires you to first set the ``TransitEncryptionMode`` to ``preferred`` , after that you can set ``TransitEncryptionMode`` to ``required`` . This process will not trigger the replacement of the replication group.
+        :param transit_encryption_enabled: A flag that enables in-transit encryption when set to ``true`` . You cannot modify the value of ``TransitEncryptionEnabled`` after the cluster is created. To enable in-transit encryption on a cluster you must set ``TransitEncryptionEnabled`` to ``true`` when you create a cluster. This parameter is valid only if the ``Engine`` parameter is ``redis`` , the ``EngineVersion`` parameter is ``3.2.6`` or ``4.x`` onward, and the cluster is being created in an Amazon VPC. If you enable in-transit encryption, you must also specify a value for ``CacheSubnetGroup`` . *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version ``3.2.6`` or ``4.x`` onward. Default: ``false`` .. epigraph:: For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` .
+        :param transit_encryption_mode: A setting that allows you to migrate your clients to use in-transit encryption, with no downtime. When setting ``TransitEncryptionEnabled`` to ``true`` , you can set your ``TransitEncryptionMode`` to ``preferred`` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis OSS clients to use encrypted connections you can modify the value to ``required`` to allow encrypted connections only. Setting ``TransitEncryptionMode`` to ``required`` is a two-step process that requires you to first set the ``TransitEncryptionMode`` to ``preferred`` , after that you can set ``TransitEncryptionMode`` to ``required`` . This process will not trigger the replacement of the replication group.
         :param user_group_ids: The ID of user group to associate with the replication group.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html
@@ -4381,7 +4373,7 @@ class CfnReplicationGroupProps:
 
         You cannot modify the value of ``AtRestEncryptionEnabled`` after the replication group is created. To enable encryption at rest on a replication group you must set ``AtRestEncryptionEnabled`` to ``true`` when you create the replication group.
 
-        *Required:* Only available when creating a replication group in an Amazon VPC using redis version ``3.2.6`` or ``4.x`` onward.
+        *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version ``3.2.6`` or ``4.x`` onward.
 
         Default: ``false``
 
@@ -4394,7 +4386,7 @@ class CfnReplicationGroupProps:
     def auth_token(self) -> typing.Optional[builtins.str]:
         '''*Reserved parameter.* The password used to access a password protected server.
 
-        ``AuthToken`` can be specified only on replication groups where ``TransitEncryptionEnabled`` is ``true`` . For more information, see `Authenticating Users with the Redis AUTH Command <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/auth.html>`_ .
+        ``AuthToken`` can be specified only on replication groups where ``TransitEncryptionEnabled`` is ``true`` . For more information, see `Authenticating Users with the Redis OSS AUTH Command <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/auth.html>`_ .
         .. epigraph::
 
            For HIPAA compliance, you must specify ``TransitEncryptionEnabled`` as ``true`` , an ``AuthToken`` , and a ``CacheSubnetGroup`` .
@@ -4421,7 +4413,7 @@ class CfnReplicationGroupProps:
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
         '''Specifies whether a read-only replica is automatically promoted to read/write primary if the existing primary fails.
 
-        ``AutomaticFailoverEnabled`` must be enabled for Redis (cluster mode enabled) replication groups.
+        ``AutomaticFailoverEnabled`` must be enabled for Redis OSS (cluster mode enabled) replication groups.
 
         Default: false
 
@@ -4434,7 +4426,7 @@ class CfnReplicationGroupProps:
     def auto_minor_version_upgrade(
         self,
     ) -> typing.Optional[typing.Union[builtins.bool, _IResolvable_da3f097b]]:
-        '''If you are running Redis engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
+        '''If you are running Redis OSS engine version 6.0 or later, set this parameter to yes if you want to opt-in to the next minor version upgrade campaign. This parameter is disabled for previous versions.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html#cfn-elasticache-replicationgroup-autominorversionupgrade
         '''
@@ -4508,10 +4500,10 @@ class CfnReplicationGroupProps:
 
         If this argument is omitted, the default cache parameter group for the specified engine is used.
 
-        If you are running Redis version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name.
+        If you are running Redis OSS version 3.2.4 or later, only one node group (shard), and want to use a default parameter group, we recommend that you specify the parameter group by name.
 
-        - To create a Redis (cluster mode disabled) replication group, use ``CacheParameterGroupName=default.redis3.2`` .
-        - To create a Redis (cluster mode enabled) replication group, use ``CacheParameterGroupName=default.redis3.2.cluster.on`` .
+        - To create a Redis OSS (cluster mode disabled) replication group, use ``CacheParameterGroupName=default.redis3.2`` .
+        - To create a Redis OSS (cluster mode enabled) replication group, use ``CacheParameterGroupName=default.redis3.2.cluster.on`` .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html#cfn-elasticache-replicationgroup-cacheparametergroupname
         '''
@@ -4544,7 +4536,7 @@ class CfnReplicationGroupProps:
     def cluster_mode(self) -> typing.Optional[builtins.str]:
         '''Enabled or Disabled.
 
-        To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see `Modify cluster mode <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/modify-cluster-mode.html>`_ .
+        To modify cluster mode from Disabled to Enabled, you must first set the cluster mode to Compatible. Compatible mode allows your Redis OSS clients to connect using both cluster mode enabled and cluster mode disabled. After you migrate all Redis OSS clients to use cluster mode enabled, you can then complete cluster mode configuration and set the cluster mode to Enabled. For more information, see `Modify cluster mode <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/modify-cluster-mode.html>`_ .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html#cfn-elasticache-replicationgroup-clustermode
         '''
@@ -4601,7 +4593,7 @@ class CfnReplicationGroupProps:
     def ip_discovery(self) -> typing.Optional[builtins.str]:
         '''The network type you choose when creating a replication group, either ``ipv4`` | ``ipv6`` .
 
-        IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html#cfn-elasticache-replicationgroup-ipdiscovery
         '''
@@ -4645,7 +4637,7 @@ class CfnReplicationGroupProps:
     def network_type(self) -> typing.Optional[builtins.str]:
         '''Must be either ``ipv4`` | ``ipv6`` | ``dual_stack`` .
 
-        IPv6 is supported for workloads using Redis engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
+        IPv6 is supported for workloads using Redis OSS engine version 6.2 onward or Memcached engine version 1.6.6 on all instances built on the `Nitro system <https://docs.aws.amazon.com/ec2/nitro/>`_ .
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html#cfn-elasticache-replicationgroup-networktype
         '''
@@ -4656,7 +4648,7 @@ class CfnReplicationGroupProps:
     def node_group_configuration(
         self,
     ) -> typing.Optional[typing.Union[_IResolvable_da3f097b, typing.List[typing.Union[_IResolvable_da3f097b, CfnReplicationGroup.NodeGroupConfigurationProperty]]]]:
-        '''``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis cluster node group.
+        '''``NodeGroupConfiguration`` is a property of the ``AWS::ElastiCache::ReplicationGroup`` resource that configures an Amazon ElastiCache (ElastiCache) Redis OSS cluster node group.
 
         If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NodeGroupConfiguration`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NodeGroupConfiguration`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
 
@@ -4695,9 +4687,9 @@ class CfnReplicationGroupProps:
 
     @builtins.property
     def num_node_groups(self) -> typing.Optional[jsii.Number]:
-        '''An optional parameter that specifies the number of node groups (shards) for this Redis (cluster mode enabled) replication group.
+        '''An optional parameter that specifies the number of node groups (shards) for this Redis OSS (cluster mode enabled) replication group.
 
-        For Redis (cluster mode disabled) either omit this parameter or set it to 1.
+        For Redis OSS (cluster mode disabled) either omit this parameter or set it to 1.
 
         If you set `UseOnlineResharding <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-updatepolicy.html#cfn-attributes-updatepolicy-useonlineresharding>`_ to ``true`` , you can update ``NumNodeGroups`` without interruption. When ``UseOnlineResharding`` is set to ``false`` , or is not specified, updating ``NumNodeGroups`` results in `replacement <https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks-update-behaviors.html#update-replacement>`_ .
 
@@ -4814,7 +4806,7 @@ class CfnReplicationGroupProps:
 
     @builtins.property
     def snapshot_arns(self) -> typing.Optional[typing.List[builtins.str]]:
-        '''A list of Amazon Resource Names (ARN) that uniquely identify the Redis RDB snapshot files stored in Amazon S3.
+        '''A list of Amazon Resource Names (ARN) that uniquely identify the Redis OSS RDB snapshot files stored in Amazon S3.
 
         The snapshot files are used to populate the new replication group. The Amazon S3 object name in the ARN cannot contain any commas. The new replication group will have the number of node groups (console: shards) specified by the parameter *NumNodeGroups* or the number of node groups configured by *NodeGroupConfiguration* regardless of the number of ARNs specified here.
 
@@ -4853,7 +4845,7 @@ class CfnReplicationGroupProps:
     def snapshotting_cluster_id(self) -> typing.Optional[builtins.str]:
         '''The cluster ID that is used as the daily snapshot source for the replication group.
 
-        This parameter cannot be set for Redis (cluster mode enabled) replication groups.
+        This parameter cannot be set for Redis OSS (cluster mode enabled) replication groups.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-replicationgroup.html#cfn-elasticache-replicationgroup-snapshottingclusterid
         '''
@@ -4896,7 +4888,7 @@ class CfnReplicationGroupProps:
 
         If you enable in-transit encryption, you must also specify a value for ``CacheSubnetGroup`` .
 
-        *Required:* Only available when creating a replication group in an Amazon VPC using redis version ``3.2.6`` or ``4.x`` onward.
+        *Required:* Only available when creating a replication group in an Amazon VPC using Redis OSS version ``3.2.6`` or ``4.x`` onward.
 
         Default: ``false``
         .. epigraph::
@@ -4912,7 +4904,7 @@ class CfnReplicationGroupProps:
     def transit_encryption_mode(self) -> typing.Optional[builtins.str]:
         '''A setting that allows you to migrate your clients to use in-transit encryption, with no downtime.
 
-        When setting ``TransitEncryptionEnabled`` to ``true`` , you can set your ``TransitEncryptionMode`` to ``preferred`` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis clients to use encrypted connections you can modify the value to ``required`` to allow encrypted connections only.
+        When setting ``TransitEncryptionEnabled`` to ``true`` , you can set your ``TransitEncryptionMode`` to ``preferred`` in the same request, to allow both encrypted and unencrypted connections at the same time. Once you migrate all your Redis OSS clients to use encrypted connections you can modify the value to ``required`` to allow encrypted connections only.
 
         Setting ``TransitEncryptionMode`` to ``required`` is a two-step process that requires you to first set the ``TransitEncryptionMode`` to ``preferred`` , after that you can set ``TransitEncryptionMode`` to ``required`` .
 
@@ -5059,7 +5051,7 @@ class CfnSecurityGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__8a58aa3e47b676ffbd43668bc6e1d2c79b30df11d4e23ee80c4bdefdb1e2e460)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "description", value)
+        jsii.set(self, "description", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -5072,7 +5064,7 @@ class CfnSecurityGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__8d0db95241a79cc90ce9ac36752f3ee20a66c04797f992822d1387e95ab0d3dc)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
 
 @jsii.implements(_IInspectable_c2943556)
@@ -5189,7 +5181,7 @@ class CfnSecurityGroupIngress(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__439c20ee90e3a27653353314240f9637cdf95b53b1cd23e4aaec9d21b5d568c9)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheSecurityGroupName", value)
+        jsii.set(self, "cacheSecurityGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="ec2SecurityGroupName")
@@ -5202,7 +5194,7 @@ class CfnSecurityGroupIngress(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__0abb1fc13eea94e08b452064202975643af441a003c80b20a2dd84ee151b33ab)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "ec2SecurityGroupName", value)
+        jsii.set(self, "ec2SecurityGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="ec2SecurityGroupOwnerId")
@@ -5215,7 +5207,7 @@ class CfnSecurityGroupIngress(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__d69c9ced7a396b23c621165b2be40f28744ce4080f376459c1fec4f135a9d8a9)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "ec2SecurityGroupOwnerId", value)
+        jsii.set(self, "ec2SecurityGroupOwnerId", value) # pyright: ignore[reportArgumentType]
 
 
 @jsii.data_type(
@@ -5481,7 +5473,7 @@ class CfnServerlessCache(
         :param engine: The engine the serverless cache is compatible with.
         :param serverless_cache_name: The unique identifier of the serverless cache.
         :param cache_usage_limits: The cache usage limit for the serverless cache.
-        :param daily_snapshot_time: The daily time that a cache snapshot will be created. Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Redis and Serverless Memcached only.
+        :param daily_snapshot_time: The daily time that a cache snapshot will be created. Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Redis OSS and Serverless Memcached only.
         :param description: A description of the serverless cache.
         :param endpoint: Represents the information required for client programs to connect to a cache node. This value is read-only.
         :param final_snapshot_name: The name of the final snapshot taken of a cache before the cache is deleted.
@@ -5490,10 +5482,10 @@ class CfnServerlessCache(
         :param reader_endpoint: Represents the information required for client programs to connect to a cache node. This value is read-only.
         :param security_group_ids: The IDs of the EC2 security groups associated with the serverless cache.
         :param snapshot_arns_to_restore: The ARN of the snapshot from which to restore data into the new cache.
-        :param snapshot_retention_limit: The current setting for the number of serverless cache snapshots the system will retain. Available for Redis and Serverless Memcached only.
+        :param snapshot_retention_limit: The current setting for the number of serverless cache snapshots the system will retain. Available for Redis OSS and Serverless Memcached only.
         :param subnet_ids: If no subnet IDs are given and your VPC is in us-west-1, then ElastiCache will select 2 default subnets across AZs in your VPC. For all other Regions, if no subnet IDs are given then ElastiCache will select 3 default subnets across AZs in your default VPC.
         :param tags: A list of tags to be added to this resource.
-        :param user_group_id: The identifier of the user group associated with the serverless cache. Available for Redis only. Default is NULL.
+        :param user_group_id: The identifier of the user group associated with the serverless cache. Available for Redis OSS only. Default is NULL.
         '''
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f204522453489e8198605933b3b942062e9c202c1099285663a7d772a3e94ba7)
@@ -5646,7 +5638,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__db64b6c69d929608090194c9d83216677c91f2080ab6d4f59737f93d2e492503)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engine", value)
+        jsii.set(self, "engine", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="serverlessCacheName")
@@ -5659,7 +5651,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c553e861158121ce7a0545fdcf543b7615bf13ddc0bbd93cb52e72e27acd09d7)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "serverlessCacheName", value)
+        jsii.set(self, "serverlessCacheName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheUsageLimits")
@@ -5677,7 +5669,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__a90cce9924849d9cc9e8f897f51cd6502787503e9fe6f9c0b146111c1c445aa8)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheUsageLimits", value)
+        jsii.set(self, "cacheUsageLimits", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="dailySnapshotTime")
@@ -5690,7 +5682,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__e4072f21fb5867be241aa2784268fe8e3463d10cd511019b8f3599ec5d5c2cd2)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "dailySnapshotTime", value)
+        jsii.set(self, "dailySnapshotTime", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="description")
@@ -5703,7 +5695,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b6ee9bbb29fab9e6641d85980e882cc3db988c37421cc1d376048cdf7dfdcb06)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "description", value)
+        jsii.set(self, "description", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="endpoint")
@@ -5721,7 +5713,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__cf26818381fc6b07f8a2615330e14830cc8722c7bea067d80e6017ceab59af6a)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "endpoint", value)
+        jsii.set(self, "endpoint", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="finalSnapshotName")
@@ -5734,7 +5726,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__62246ee954ddcb344e45c430ef7cbe75d5a3b692a00d6e538baa399c5cab349a)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "finalSnapshotName", value)
+        jsii.set(self, "finalSnapshotName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="kmsKeyId")
@@ -5747,7 +5739,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c8cc8a3d052be3fabfdfe466bf509434f5707efc6a6dcd0770cc1a1b97e07a80)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "kmsKeyId", value)
+        jsii.set(self, "kmsKeyId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="majorEngineVersion")
@@ -5760,7 +5752,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__618e7242f4c8d6ea2092e93310602455166596d1a96215a2fb33d826bbe5fd29)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "majorEngineVersion", value)
+        jsii.set(self, "majorEngineVersion", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="readerEndpoint")
@@ -5778,7 +5770,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__d7e3145e59d2b03c61c29dd7fc18ce6d775561dcfa018b131c81d1f6e06fcd65)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "readerEndpoint", value)
+        jsii.set(self, "readerEndpoint", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="securityGroupIds")
@@ -5794,7 +5786,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__c96776cfdc2836177648dc34a892d382e760b03e46d603807886c25a9fc1d103)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "securityGroupIds", value)
+        jsii.set(self, "securityGroupIds", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotArnsToRestore")
@@ -5810,7 +5802,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b2e490a4ceeec73f3d373a179650cfec51a7cf58d7c4e7f5b06544dd1a2df316)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotArnsToRestore", value)
+        jsii.set(self, "snapshotArnsToRestore", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="snapshotRetentionLimit")
@@ -5823,7 +5815,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__4fe4130c8869d67e8891f2bbbc10c149c15af0b801a4c9393fe4b4bcc848e3f0)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "snapshotRetentionLimit", value)
+        jsii.set(self, "snapshotRetentionLimit", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="subnetIds")
@@ -5836,7 +5828,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__9ca2b56b13f3d8c09fd6a0e74df162e790fe2013d9a8d3d546b7b1aa5af8b507)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "subnetIds", value)
+        jsii.set(self, "subnetIds", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tags")
@@ -5849,7 +5841,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__2054e990234791671dd0f6c1b491baebdfaaa093bc590373b8cbe5d6a7dec291)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tags", value)
+        jsii.set(self, "tags", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="userGroupId")
@@ -5862,7 +5854,7 @@ class CfnServerlessCache(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__b592bfec207d3f2428902a54fb8adfacc60bdb7a83c47e12c1b4d76ac68444ff)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "userGroupId", value)
+        jsii.set(self, "userGroupId", value) # pyright: ignore[reportArgumentType]
 
     @jsii.data_type(
         jsii_type="aws-cdk-lib.aws_elasticache.CfnServerlessCache.CacheUsageLimitsProperty",
@@ -6229,7 +6221,7 @@ class CfnServerlessCacheProps:
         :param engine: The engine the serverless cache is compatible with.
         :param serverless_cache_name: The unique identifier of the serverless cache.
         :param cache_usage_limits: The cache usage limit for the serverless cache.
-        :param daily_snapshot_time: The daily time that a cache snapshot will be created. Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Redis and Serverless Memcached only.
+        :param daily_snapshot_time: The daily time that a cache snapshot will be created. Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Redis OSS and Serverless Memcached only.
         :param description: A description of the serverless cache.
         :param endpoint: Represents the information required for client programs to connect to a cache node. This value is read-only.
         :param final_snapshot_name: The name of the final snapshot taken of a cache before the cache is deleted.
@@ -6238,10 +6230,10 @@ class CfnServerlessCacheProps:
         :param reader_endpoint: Represents the information required for client programs to connect to a cache node. This value is read-only.
         :param security_group_ids: The IDs of the EC2 security groups associated with the serverless cache.
         :param snapshot_arns_to_restore: The ARN of the snapshot from which to restore data into the new cache.
-        :param snapshot_retention_limit: The current setting for the number of serverless cache snapshots the system will retain. Available for Redis and Serverless Memcached only.
+        :param snapshot_retention_limit: The current setting for the number of serverless cache snapshots the system will retain. Available for Redis OSS and Serverless Memcached only.
         :param subnet_ids: If no subnet IDs are given and your VPC is in us-west-1, then ElastiCache will select 2 default subnets across AZs in your VPC. For all other Regions, if no subnet IDs are given then ElastiCache will select 3 default subnets across AZs in your default VPC.
         :param tags: A list of tags to be added to this resource.
-        :param user_group_id: The identifier of the user group associated with the serverless cache. Available for Redis only. Default is NULL.
+        :param user_group_id: The identifier of the user group associated with the serverless cache. Available for Redis OSS only. Default is NULL.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-serverlesscache.html
         :exampleMetadata: fixture=_generated
@@ -6380,7 +6372,7 @@ class CfnServerlessCacheProps:
     def daily_snapshot_time(self) -> typing.Optional[builtins.str]:
         '''The daily time that a cache snapshot will be created.
 
-        Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Redis and Serverless Memcached only.
+        Default is NULL, i.e. snapshots will not be created at a specific time on a daily basis. Available for Redis OSS and Serverless Memcached only.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-serverlesscache.html#cfn-elasticache-serverlesscache-dailysnapshottime
         '''
@@ -6471,7 +6463,7 @@ class CfnServerlessCacheProps:
     def snapshot_retention_limit(self) -> typing.Optional[jsii.Number]:
         '''The current setting for the number of serverless cache snapshots the system will retain.
 
-        Available for Redis and Serverless Memcached only.
+        Available for Redis OSS and Serverless Memcached only.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-serverlesscache.html#cfn-elasticache-serverlesscache-snapshotretentionlimit
         '''
@@ -6502,7 +6494,7 @@ class CfnServerlessCacheProps:
     def user_group_id(self) -> typing.Optional[builtins.str]:
         '''The identifier of the user group associated with the serverless cache.
 
-        Available for Redis only. Default is NULL.
+        Available for Redis OSS only. Default is NULL.
 
         :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-serverlesscache.html#cfn-elasticache-serverlesscache-usergroupid
         '''
@@ -6637,7 +6629,7 @@ class CfnSubnetGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__8c5ab35ff7baba1205becdb157e37a43b2ffdb8d78b6a89812dec13e870110ee)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "description", value)
+        jsii.set(self, "description", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="subnetIds")
@@ -6650,7 +6642,7 @@ class CfnSubnetGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__406b48aa434500b28470efd76a3cfb00968662ddd966571565ba3c47788bd26d)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "subnetIds", value)
+        jsii.set(self, "subnetIds", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="cacheSubnetGroupName")
@@ -6666,7 +6658,7 @@ class CfnSubnetGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__26295a8a2dc7d2b6948d4efdcca51f3722ed36bec5ced2fbf24d774ea7b28163)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "cacheSubnetGroupName", value)
+        jsii.set(self, "cacheSubnetGroupName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -6679,7 +6671,7 @@ class CfnSubnetGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__3f6670815d10d752e7b16bcf0f681bfa6e802161e1b1eba4c63dd3a6d9846719)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
 
 @jsii.data_type(
@@ -6806,7 +6798,7 @@ class CfnUser(
     metaclass=jsii.JSIIMeta,
     jsii_type="aws-cdk-lib.aws_elasticache.CfnUser",
 ):
-    '''For Redis engine version 6.0 onwards: Creates a Redis user. For more information, see `Using Role Based Access Control (RBAC) <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Clusters.RBAC.html>`_ .
+    '''For Redis OSS engine version 6.0 onwards: Creates a Redis OSS user. For more information, see `Using Role Based Access Control (RBAC) <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Clusters.RBAC.html>`_ .
 
     :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-user.html
     :cloudformationResource: AWS::ElastiCache::User
@@ -6952,7 +6944,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__74df73fc62abe9fa1155cea79085975215d2cc3a30983f4b784d74b2d8dafec0)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engine", value)
+        jsii.set(self, "engine", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="userId")
@@ -6965,7 +6957,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__45b8eb0ca4560239c33c66aef6a7b3087bdea40d47268790b66085c594bb3ae1)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "userId", value)
+        jsii.set(self, "userId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="userName")
@@ -6978,7 +6970,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__82b6eed2d66e57932003ce447ee4a3219513ca0c8161fae47c096809d764af5c)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "userName", value)
+        jsii.set(self, "userName", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="accessString")
@@ -6991,7 +6983,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__eb7549e3e6dbe94afa410bffc87623817e4cb26f90efb581b9a8d6dfcea71b64)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "accessString", value)
+        jsii.set(self, "accessString", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="authenticationMode")
@@ -7007,7 +6999,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__08a67425ea4c8dcb1628c0ebb391eb9d3ca8fd07b5c6306f039cb531a05565d4)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "authenticationMode", value)
+        jsii.set(self, "authenticationMode", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="noPasswordRequired")
@@ -7025,7 +7017,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__1dc0162c51746ac68f8e6c599bd425920aec49776f251d176073c998647b402e)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "noPasswordRequired", value)
+        jsii.set(self, "noPasswordRequired", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="passwords")
@@ -7038,7 +7030,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__fd01953837fe46505e356e5e6f503c48a5037161ed165b5dfa3d2124c10bf225)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "passwords", value)
+        jsii.set(self, "passwords", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -7051,7 +7043,7 @@ class CfnUser(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__eda53c926e8acd673280fda87bee7f7bcf1def006ab1883b24a6a077e43b7449)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
     @jsii.data_type(
         jsii_type="aws-cdk-lib.aws_elasticache.CfnUser.AuthenticationModeProperty",
@@ -7135,7 +7127,7 @@ class CfnUserGroup(
     metaclass=jsii.JSIIMeta,
     jsii_type="aws-cdk-lib.aws_elasticache.CfnUserGroup",
 ):
-    '''For Redis engine version 6.0 onwards: Creates a Redis user group. For more information, see `Using Role Based Access Control (RBAC) <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Clusters.RBAC.html>`_.
+    '''For Redis OSS engine version 6.0 onwards: Creates a Redis user group. For more information, see `Using Role Based Access Control (RBAC) <https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Clusters.RBAC.html>`_.
 
     :see: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticache-usergroup.html
     :cloudformationResource: AWS::ElastiCache::UserGroup
@@ -7260,7 +7252,7 @@ class CfnUserGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__6e431968f516bc728e154bbd117b40cd38af16bf361c399b85db4f54094ac994)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "engine", value)
+        jsii.set(self, "engine", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="userGroupId")
@@ -7273,7 +7265,7 @@ class CfnUserGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__7a2d97633ea9a0c04b7eee81db8315453f4d5e7436b511bc476886df00a72145)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "userGroupId", value)
+        jsii.set(self, "userGroupId", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="userIds")
@@ -7286,7 +7278,7 @@ class CfnUserGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__537c18038663c50194ccf261d54d663088b0bde017663b14868ca50759a76109)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "userIds", value)
+        jsii.set(self, "userIds", value) # pyright: ignore[reportArgumentType]
 
     @builtins.property
     @jsii.member(jsii_name="tagsRaw")
@@ -7299,7 +7291,7 @@ class CfnUserGroup(
         if __debug__:
             type_hints = typing.get_type_hints(_typecheckingstub__f91d8988fa4ff59ae0f0f6e912aaa87f88df9ee98afddb86934a2611c1d0da39)
             check_type(argname="argument value", value=value, expected_type=type_hints["value"])
-        jsii.set(self, "tagsRaw", value)
+        jsii.set(self, "tagsRaw", value) # pyright: ignore[reportArgumentType]
 
 
 @jsii.data_type(