ansys-fluent-core 0.35.dev1__py3-none-any.whl → 0.36.dev0__py3-none-any.whl

ansys/fluent/core/generated/datamodel_252/meshing.py

@@ -1769,12 +1769,12 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
+                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
+                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -1804,24 +1804,19 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
-                    """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
-                    """
-
                 class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
                     Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
-                class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument InvalidNormalMethod.
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
-                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    Argument InvalidNormalMethod.
                     """
 
                 class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
@@ -1834,6 +1829,11 @@ class Root(PyMenu):
                     Argument LastRatioNumLayers.
                     """
 
+                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    """
+
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
                     """
                     Controls the tangency of the invalid normal faces. An invalid normal location with all 90 degree angles has a tangency of 1. So, faces are still treated as an invalid normal even if the angle deviates slightly from 90 degrees (resulting in a tangency of 0.98).
@@ -2090,11 +2090,11 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
+                    self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
+                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
@@ -2125,14 +2125,14 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
+                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
+                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
                 class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
@@ -2140,14 +2140,14 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
-                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    Display advanced options that you may want to apply to this task.
                     """
 
-                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
+                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to this task.
+                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
                     """
 
                 class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
@@ -2395,9 +2395,9 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
-                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
+                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
+                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
@@ -2448,9 +2448,9 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
                 class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
@@ -2458,9 +2458,9 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
-                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
+                class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the increase in element edge length with each succeeding layer of elements.
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
                     """
 
                 class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
@@ -3253,8 +3253,8 @@ class Root(PyMenu):
                     self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
@@ -3278,14 +3278,14 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument LastRatioNumLayers.
                     """
 
                 class _GapFactor(PyNumericalCommandArgumentsSubItem):
@@ -4162,23 +4162,23 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.WrapTargetRatio = self._WrapTargetRatio(self, "WrapTargetRatio", service, rules, path)
+                    self.TargeSizeFieldFileName = self._TargeSizeFieldFileName(self, "TargeSizeFieldFileName", service, rules, path)
                     self.WrapTargetSizeFieldRatio = self._WrapTargetSizeFieldRatio(self, "WrapTargetSizeFieldRatio", service, rules, path)
-                    self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
+                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.SolidFluidRaio = self._SolidFluidRaio(self, "SolidFluidRaio", service, rules, path)
                     self.BoundaryLayers = self._BoundaryLayers(self, "BoundaryLayers", service, rules, path)
                     self.EdgeProximityComputation = self._EdgeProximityComputation(self, "EdgeProximityComputation", service, rules, path)
-                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
                     self.SolidFluidRatio = self._SolidFluidRatio(self, "SolidFluidRatio", service, rules, path)
                     self.TargetSizeFieldFileName = self._TargetSizeFieldFileName(self, "TargetSizeFieldFileName", service, rules, path)
                     self.ExistingSizeField = self._ExistingSizeField(self, "ExistingSizeField", service, rules, path)
                     self.WrapSizeFieldFileName = self._WrapSizeFieldFileName(self, "WrapSizeFieldFileName", service, rules, path)
-                    self.TargeSizeFieldFileName = self._TargeSizeFieldFileName(self, "TargeSizeFieldFileName", service, rules, path)
+                    self.WrapTargetRatio = self._WrapTargetRatio(self, "WrapTargetRatio", service, rules, path)
                     self.WrapTargetRaio = self._WrapTargetRaio(self, "WrapTargetRaio", service, rules, path)
 
-                class _WrapTargetRatio(PyNumericalCommandArgumentsSubItem):
+                class _TargeSizeFieldFileName(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument WrapTargetRatio.
+                    Indicate the name and location of the target size field file (\\*.sf).
                     """
 
                 class _WrapTargetSizeFieldRatio(PyNumericalCommandArgumentsSubItem):
@@ -4186,9 +4186,9 @@ class Root(PyMenu):
                     The ratio of the initial wrap size field and the local target size field.
                     """
 
-                class _WrapTargetBothOptions(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Determine how the size controls are calculated in the Add Local Sizing task: using Both Wrap and Target values, by Target Only (the default), or by Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _SolidFluidRaio(PyNumericalCommandArgumentsSubItem):
@@ -4206,9 +4206,9 @@ class Root(PyMenu):
                     For geometries having a very large number of small feature edges, select Yes to speed up the calculation and reduce memory requirements when using a proximity size function.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _WrapTargetBothOptions(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Determine how the size controls are calculated in the Add Local Sizing task: using Both Wrap and Target values, by Target Only (the default), or by Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
                     """
 
                 class _SolidFluidRatio(PyNumericalCommandArgumentsSubItem):
@@ -4231,9 +4231,9 @@ class Root(PyMenu):
                     Indicate the name and location of the wrap size field file (\\*.sf).
                     """
 
-                class _TargeSizeFieldFileName(PyTextualCommandArgumentsSubItem):
+                class _WrapTargetRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Indicate the name and location of the target size field file (\\*.sf).
+                    Argument WrapTargetRatio.
                     """
 
                 class _WrapTargetRaio(PyNumericalCommandArgumentsSubItem):
@@ -4508,7 +4508,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -4519,16 +4519,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Argument SizeRelativeLength.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Xmax.
+                    Argument XmaxRatio.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -4581,9 +4581,9 @@ class Root(PyMenu):
                     Argument ZmaxRatio.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument XmaxRatio.
+                    Argument Xmax.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -4599,17 +4599,17 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -4644,19 +4644,19 @@ class Root(PyMenu):
                     Argument AspectRatio.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument Rate.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -4674,9 +4674,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument NumberOfLayers.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -4689,14 +4689,14 @@ class Root(PyMenu):
                     Argument LastRatioPercentage.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Argument OffsetMethodType.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument OffsetMethodType.
+                    Argument FlipDirection.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -4726,32 +4726,32 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
                     self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
+                    self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -4774,9 +4774,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -4784,9 +4784,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -4804,6 +4804,11 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument Y-Offset.
+                    """
+
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument X2.
@@ -4814,11 +4819,6 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument Y-Offset.
-                    """
-
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -4873,12 +4873,12 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
+                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
@@ -4892,14 +4892,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -4907,9 +4907,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -4917,9 +4917,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -5185,18 +5185,18 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5226,9 +5226,14 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument AspectRatio.
+                    """
+
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument WakeGrowthFactor.
                     """
 
                 class _Rate(PyNumericalCommandArgumentsSubItem):
@@ -5241,11 +5246,6 @@ class Root(PyMenu):
                     Argument NumberOfLayers.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument WakeGrowthFactor.
-                    """
-
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
                     """
                     Argument FlowDirection.
@@ -5261,14 +5261,9 @@ class Root(PyMenu):
                     Choose a single edge zone from the list below for your edge-based collar mesh. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument AspectRatio.
-                    """
-
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -5276,9 +5271,9 @@ class Root(PyMenu):
                     Specify the x-coordinate of the offset collar mesh.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument OffsetMethodType.
+                    Argument LastRatioPercentage.
                     """
 
                 class _FlipDirection(PyParameterCommandArgumentsSubItem):
@@ -5286,6 +5281,11 @@ class Root(PyMenu):
                     Argument FlipDirection.
                     """
 
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                    """
+                    Argument OffsetMethodType.
+                    """
+
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument FirstHeight.
@@ -5313,8 +5313,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
                     self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
+                    self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
@@ -5325,20 +5325,20 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -5391,6 +5391,11 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
+                class _Node2(PyTextualCommandArgumentsSubItem):
+                    """
+                    Argument Node2.
+                    """
+
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument X2.
@@ -5401,11 +5406,6 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
-                    """
-                    Argument Node2.
-                    """
-
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -5460,12 +5460,12 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
@@ -5479,14 +5479,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -5494,9 +5494,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -5504,9 +5504,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -5683,7 +5683,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -5694,16 +5694,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the component mesh as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -5756,9 +5756,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -5773,18 +5773,18 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5814,9 +5814,9 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the ratio of the prism base length to the prism layer height.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
@@ -5829,9 +5829,9 @@ class Root(PyMenu):
                     Specify the rate of growth of the boundary layer.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select the number of boundary layers to be generated.
+                    Specify the ratio of the prism base length to the prism layer height.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5849,9 +5849,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Select the number of boundary layers to be generated.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -5864,14 +5864,14 @@ class Root(PyMenu):
                     Argument X.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose the method that will be used to create the boundary layer, or prism, controls.
+                    Argument FlipDirection.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Choose the method that will be used to create the boundary layer, or prism, controls.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -5913,9 +5913,9 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5979,9 +5979,9 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Node2.
+                    Argument Y-Offset.
                     """
 
                 class _X2(PyNumericalCommandArgumentsSubItem):
@@ -5989,9 +5989,9 @@ class Root(PyMenu):
                     Argument X2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _Node2(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument Node2.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -6370,7 +6370,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6381,16 +6381,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6443,9 +6443,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
         def create_instance(self) -> _CreateExternalFlowBoundariesCommandArguments:
@@ -6891,7 +6891,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6902,16 +6902,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the refinement region as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6964,9 +6964,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -6983,16 +6983,16 @@ class Root(PyMenu):
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -7032,14 +7032,14 @@ class Root(PyMenu):
                     Specify the factor by which the refinement region expands in the wake of the flow direction.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Argument NumberOfLayers.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument Rate.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -7062,19 +7062,14 @@ class Root(PyMenu):
                     Argument AspectRatio.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument LastRatioPercentage.
-                    """
-
                 class _X(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Reverses the orientation of the refinement region.
+                    Argument LastRatioPercentage.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -7082,6 +7077,11 @@ class Root(PyMenu):
                     Argument OffsetMethodType.
                     """
 
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                    """
+                    Reverses the orientation of the refinement region.
+                    """
+
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument FirstHeight.
@@ -7121,9 +7121,9 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -7187,11 +7187,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
-                    """
-
                 class _Node2(PyTextualCommandArgumentsSubItem):
                     """
                     Argument Node2.
@@ -7202,6 +7197,11 @@ class Root(PyMenu):
                     Specify the X-coordinate of the second position of the cylinder.
                     """
 
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -7266,8 +7266,8 @@ class Root(PyMenu):
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
+                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -7325,14 +7325,14 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the radius of the cylinder at the second position.
+                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
+                    Specify the radius of the cylinder at the second position.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -7538,11 +7538,11 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
-                    self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
                     self.Thickness = self._Thickness(self, "Thickness", service, rules, path)
-                    self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
+                    self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
+                    self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.BufferSize = self._BufferSize(self, "BufferSize", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.NonRectangularBufferSize = self._NonRectangularBufferSize(self, "NonRectangularBufferSize", service, rules, path)
@@ -7558,11 +7558,6 @@ class Root(PyMenu):
                     Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _SelectionType(PyTextualCommandArgumentsSubItem):
-                    """
-                    Choose how you want to make your selection (by object, zone, or label).
-                    """
-
                 class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
                     """
                     Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
@@ -7573,9 +7568,9 @@ class Root(PyMenu):
                     Specify the thickness (or the total height) of the porous region.
                     """
 
-                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _SelectionType(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the angle at which features will be extracted for the porous region.
+                    Choose how you want to make your selection (by object, zone, or label).
                     """
 
                 class _MeshSize(PyNumericalCommandArgumentsSubItem):
@@ -7583,6 +7578,11 @@ class Root(PyMenu):
                     Specify the cell size for the porous region mesh.
                     """
 
+                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the angle at which features will be extracted for the porous region.
+                    """
+
                 class _BufferSize(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify a value for the buffer size. The buffer is created as an extra layer. The thickness is equivalent to the product of the buffer size ratio and the core thickness. The core thickness is the distance between P1 and P4.
@@ -7912,9 +7912,9 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.PorousRegions = self._PorousRegions(self, "PorousRegions", service, rules, path)
                     self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
+                    self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
-                    self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
                     self.ExtractEdgeFeatures = self._ExtractEdgeFeatures(self, "ExtractEdgeFeatures", service, rules, path)
                     self.MovingObjects = self._MovingObjects(self, "MovingObjects", service, rules, path)
                     self.EnablePrimeWrapper = self._EnablePrimeWrapper(self, "EnablePrimeWrapper", service, rules, path)
@@ -7931,6 +7931,11 @@ class Root(PyMenu):
                     Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
                     """
 
+                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
+                    """
+                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
+                    """
+
                 class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
                     Display advanced options that you may want to apply to the workflow.
@@ -7941,11 +7946,6 @@ class Root(PyMenu):
                     Argument CloseLeakages.
                     """
 
-                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
-                    """
-                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
-                    """
-
                 class _ExtractEdgeFeatures(PyTextualCommandArgumentsSubItem):
                     """
                     Specify whether or not you will need to extract additional edge features from your imported geometry. These edge features will be captured. If so, then an Extract Edge Features task will be added to the workflow.
@@ -8287,16 +8287,16 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.BiasMethod = self._BiasMethod(self, "BiasMethod", service, rules, path)
-                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
                     self.MaxLayerHeight = self._MaxLayerHeight(self, "MaxLayerHeight", service, rules, path)
+                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
+                    self.BiasMethod = self._BiasMethod(self, "BiasMethod", service, rules, path)
                     self.BiasMethodControl = self._BiasMethodControl(self, "BiasMethodControl", service, rules, path)
                     self.MergeCellZones = self._MergeCellZones(self, "MergeCellZones", service, rules, path)
                     self.ShowVMExtrudePreferences = self._ShowVMExtrudePreferences(self, "ShowVMExtrudePreferences", service, rules, path)
 
-                class _BiasMethod(PyTextualCommandArgumentsSubItem):
+                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
+                    Argument MaxLayerHeight.
                     """
 
                 class _MidSpanLength(PyNumericalCommandArgumentsSubItem):
@@ -8304,9 +8304,9 @@ class Root(PyMenu):
                     Argument MidSpanLength.
                     """
 
-                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
+                class _BiasMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MaxLayerHeight.
+                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
                     """
 
                 class _BiasMethodControl(PyTextualCommandArgumentsSubItem):
@@ -8393,10 +8393,10 @@ class Root(PyMenu):
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.RemeshGrowthRate = self._RemeshGrowthRate(self, "RemeshGrowthRate", service, rules, path)
                     self.LocalRemesh = self._LocalRemesh(self, "LocalRemesh", service, rules, path)
-                    self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
+                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
                     self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
+                    self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.ShowPrism2DPreferences = self._ShowPrism2DPreferences(self, "ShowPrism2DPreferences", service, rules, path)
-                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
                     self.nOrthogonalLayers = self._nOrthogonalLayers(self, "nOrthogonalLayers", service, rules, path)
 
                 class _SplitQuads(PyTextualCommandArgumentsSubItem):
@@ -8424,9 +8424,9 @@ class Root(PyMenu):
                     Argument LocalRemesh.
                     """
 
-                class _GapFactor(PyNumericalCommandArgumentsSubItem):
+                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument GapFactor.
+                    Argument MaxFaceSkew.
                     """
 
                 class _RefineStretchedQuads(PyTextualCommandArgumentsSubItem):
@@ -8434,14 +8434,14 @@ class Root(PyMenu):
                     Argument RefineStretchedQuads.
                     """
 
-                class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
+                class _GapFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ShowPrism2DPreferences.
+                    Argument GapFactor.
                     """
 
-                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
+                class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument MaxFaceSkew.
+                    Argument ShowPrism2DPreferences.
                     """
 
                 class _nOrthogonalLayers(PyNumericalCommandArgumentsSubItem):
@@ -8456,18 +8456,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.MergeEdgeZonesBasedOnLabels = self._MergeEdgeZonesBasedOnLabels(self, "MergeEdgeZonesBasedOnLabels", service, rules, path)
+                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.ShowAdvancedOptions = self._ShowAdvancedOptions(self, "ShowAdvancedOptions", service, rules, path)
 
-                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeFaceZonesBasedOnLabels.
+                    Argument MergeEdgeZonesBasedOnLabels.
                     """
 
-                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeEdgeZonesBasedOnLabels.
+                    Argument MergeFaceZonesBasedOnLabels.
                     """
 
                 class _ShowAdvancedOptions(PyParameterCommandArgumentsSubItem):
@@ -8780,8 +8780,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -8811,14 +8811,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -9168,8 +9168,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -9199,14 +9199,14 @@ class Root(PyMenu):
                     Set proximity based refinement. Edges considers edge-to-edge proximity, while Faces considers face-to-face proximity, and Faces and Edges considers both.  More...
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Enable this option to visualize the size field in the graphics window.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.  More...
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.  More...
+                    Enable this option to visualize the size field in the graphics window.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -9308,17 +9308,17 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
-                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
@@ -9334,9 +9334,9 @@ class Root(PyMenu):
                     Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
+                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
                     """
 
                 class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
@@ -9349,9 +9349,9 @@ class Root(PyMenu):
                     Argument AutoMerge.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
+                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -9374,9 +9374,9 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -9384,9 +9384,9 @@ class Root(PyMenu):
                     Choose whether or not to automatically assign boundary types to zones.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
                     """
 
                 class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
@@ -10032,9 +10032,9 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
-                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
                     self.HexMinCellLength = self._HexMinCellLength(self, "HexMinCellLength", service, rules, path)
+                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
+                    self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
                     self.Type = self._Type(self, "Type", service, rules, path)
                     self.CellSizing = self._CellSizing(self, "CellSizing", service, rules, path)
                     self.HexMaxSize = self._HexMaxSize(self, "HexMaxSize", service, rules, path)
@@ -10047,9 +10047,9 @@ class Root(PyMenu):
                     Argument MaxSize.
                     """
 
-                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
+                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
+                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
                     """
 
                 class _TetPolyMaxCellLength(PyNumericalCommandArgumentsSubItem):
@@ -10057,9 +10057,9 @@ class Root(PyMenu):
                     The maximum cell length for either the tetrahedron, polyhedron, or poly-hexcore volume fill types.
                     """
 
-                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
+                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
+                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
                     """
 
                 class _Type(PyTextualCommandArgumentsSubItem):
@@ -10114,34 +10114,34 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
-                    self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
+                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
                     self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
                     self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
-                    self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
-                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
+                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
                     self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
-                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
+                    self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
                     self.AddMultipleQualityMethods = self._AddMultipleQualityMethods(self, "AddMultipleQualityMethods", service, rules, path)
                     self.MaxCellSizeChange = self._MaxCellSizeChange(self, "MaxCellSizeChange", service, rules, path)
                     self.WritePrismControlFile = self._WritePrismControlFile(self, "WritePrismControlFile", service, rules, path)
                     self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
                     self.CheckSelfProximity = self._CheckSelfProximity(self, "CheckSelfProximity", service, rules, path)
                     self.Avoid1_8Transition = self._Avoid1_8Transition(self, "Avoid1_8Transition", service, rules, path)
-                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
                     self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
+                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
                     self.SolidGrowthRate = self._SolidGrowthRate(self, "SolidGrowthRate", service, rules, path)
-                    self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
+                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.QualityWarningLimit = self._QualityWarningLimit(self, "QualityWarningLimit", service, rules, path)
 
-                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
+                class _UseSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
+                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
                     """
 
-                class _QualityMethod(PyTextualCommandArgumentsSubItem):
+                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
+                    Specify the angle to preserve features when using a polyhedral-based mesh.
                     """
 
                 class _MinPolySize(PyNumericalCommandArgumentsSubItem):
@@ -10154,14 +10154,14 @@ class Root(PyMenu):
                     Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
                     """
 
-                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _QualityMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the angle to preserve features when using a polyhedral-based mesh.
+                    Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
                     """
 
-                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
+                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
                     """
 
                 class _PolyInSolids(PyTextualCommandArgumentsSubItem):
@@ -10169,9 +10169,9 @@ class Root(PyMenu):
                     Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
                     """
 
-                class _TetInSolids(PyTextualCommandArgumentsSubItem):
+                class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument TetInSolids.
+                    Argument MinEdgeLength.
                     """
 
                 class _AddMultipleQualityMethods(PyTextualCommandArgumentsSubItem):
@@ -10204,14 +10204,14 @@ class Root(PyMenu):
                     Indicate whether or not you want to avoid any potential 1:8 cell transition in the hexcore region of the volume mesh, replacing any abrupt change in the cell size with polyhedral cells to improve solver performance in such transitional areas.
                     """
 
-                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
                     """
 
-                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
+                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _SolidGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -10219,9 +10219,9 @@ class Root(PyMenu):
                     Specify the rate of growth for a tetrahedron or polyhedron mesh.
                     """
 
-                class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
+                class _TetInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MinEdgeLength.
+                    Argument TetInSolids.
                     """
 
                 class _QualityWarningLimit(PyNumericalCommandArgumentsSubItem):
@@ -10245,8 +10245,8 @@ class Root(PyMenu):
                     self.MergeBoundaryLayers = self._MergeBoundaryLayers(self, "MergeBoundaryLayers", service, rules, path)
                     self.NormalSmoothRelaxationFactor = self._NormalSmoothRelaxationFactor(self, "NormalSmoothRelaxationFactor", service, rules, path)
                     self.ShowPrismPreferences = self._ShowPrismPreferences(self, "ShowPrismPreferences", service, rules, path)
-                    self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismMinAspectRatio = self._PrismMinAspectRatio(self, "PrismMinAspectRatio", service, rules, path)
+                    self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismAdjacentAngle = self._PrismAdjacentAngle(self, "PrismAdjacentAngle", service, rules, path)
 
                 class _PrismKeepFirstLayer(PyTextualCommandArgumentsSubItem):
@@ -10294,14 +10294,14 @@ class Root(PyMenu):
                     Display global settings for your boundary layers. Note that these settings are not applied for Multizone boundary layers
                     """
 
-                class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
+                class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    This option can be used when generating a tetrahedral mesh with prism cells and is set to No by default. Selecting Yes for this option will enable stair-stepping for exposed quadrilateral faces (exposed quads) on prism cells. Stair-stepping will prevent pyramids from being created on these exposed quads, which generally would lead to poor quality in the exposed quad location.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
-                class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    This option can be used when generating a tetrahedral mesh with prism cells and is set to No by default. Selecting Yes for this option will enable stair-stepping for exposed quadrilateral faces (exposed quads) on prism cells. Stair-stepping will prevent pyramids from being created on these exposed quads, which generally would lead to poor quality in the exposed quad location.
                     """
 
                 class _PrismAdjacentAngle(PyNumericalCommandArgumentsSubItem):
@@ -10317,18 +10317,18 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
-                    self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
                     self.ShowGlobalThinVolumePreferences = self._ShowGlobalThinVolumePreferences(self, "ShowGlobalThinVolumePreferences", service, rules, path)
+                    self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
+                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
 
                 class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
                     Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
-                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
+                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
+                    Display global settings for thin volume meshing.
                     """
 
                 class _StairStep(PyTextualCommandArgumentsSubItem):
@@ -10336,9 +10336,9 @@ class Root(PyMenu):
                     Use this option to invoke stair-stepping at thin volume mesh regions.
                     """
 
-                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
+                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
                     """
-                    Display global settings for thin volume meshing.
+                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
                     """
 
             class _InvokePrimsControl(PyTextualCommandArgumentsSubItem):
@@ -11012,8 +11012,8 @@ class Root(PyMenu):
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -11082,14 +11082,14 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument X2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Y-Offset.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -11115,7 +11115,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -11126,16 +11126,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the construction surface as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -11188,9 +11188,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
         def create_instance(self) -> _IdentifyConstructionSurfacesCommandArguments:
@@ -11772,14 +11772,14 @@ class Root(PyMenu):
                     self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
                     self.FacetedBodies = self._FacetedBodies(self, "FacetedBodies", service, rules, path)
                     self.CISeparation = self._CISeparation(self, "CISeparation", service, rules, path)
-                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
+                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
                     self.CIRefaceting = self._CIRefaceting(self, "CIRefaceting", service, rules, path)
                     self.AutomaticObjectCreation = self._AutomaticObjectCreation(self, "AutomaticObjectCreation", service, rules, path)
-                    self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
                     self.MaxFacetLength = self._MaxFacetLength(self, "MaxFacetLength", service, rules, path)
+                    self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
                     self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
                     self.CISeparationAngle = self._CISeparationAngle(self, "CISeparationAngle", service, rules, path)
-                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
+                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
 
                 class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
                     """
@@ -11796,9 +11796,9 @@ class Root(PyMenu):
                     Choose whether or not you are going to separate zones upon import based on a region, a region and a specified separation angle, a face, or neither. This is required to select faces for local sizing. If Named Selections have already been defined at these locations, then separation is not needed.
                     """
 
-                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
+                class _CITolerence(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
+                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
                     """
 
                 class _CIRefaceting(PyParameterCommandArgumentsSubItem):
@@ -11811,14 +11811,14 @@ class Root(PyMenu):
                     Determine whether or not mesh objects and labels are automatically created upon import, potentially and dramatically increasing the mesh import speed for very large cases. By default, this is set to yes however, if it is set to no, then no labels are created and a single mesh object is created employing all zones.
                     """
 
-                class _ShowImportCadPreferences(PyParameterCommandArgumentsSubItem):
+                class _MaxFacetLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enables you to specify a maximum facet size for the imported model to avoid very large facets during the file import. Depending on the CAD geometry, this may yield more accuracy.
                     """
 
-                class _MaxFacetLength(PyNumericalCommandArgumentsSubItem):
+                class _ShowImportCadPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enables you to specify a maximum facet size for the imported model to avoid very large facets during the file import. Depending on the CAD geometry, this may yield more accuracy.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _MergeNodes(PyTextualCommandArgumentsSubItem):
@@ -11831,9 +11831,9 @@ class Root(PyMenu):
                     Specify the angle at which features will be extracted from the CAD model on import. Assigning a smaller separation angle will produce more zones.
                     """
 
-                class _CITolerence(PyNumericalCommandArgumentsSubItem):
+                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
+                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
                     """
 
             class _FileName(PyTextualCommandArgumentsSubItem):
@@ -11884,11 +11884,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11920,19 +11920,19 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11940,9 +11940,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportNamedSelections.
                     """
 
         def create_instance(self) -> _ImportGeometryCommandArguments:
@@ -12378,9 +12378,9 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.FacetResolution = self._FacetResolution(self, "FacetResolution", service, rules, path)
-                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.MaxEdgeLength = self._MaxEdgeLength(self, "MaxEdgeLength", service, rules, path)
                     self.CustomNormalAngle = self._CustomNormalAngle(self, "CustomNormalAngle", service, rules, path)
                     self.CustomDeviation = self._CustomDeviation(self, "CustomDeviation", service, rules, path)
@@ -12396,11 +12396,6 @@ class Root(PyMenu):
                     Argument FacetResolution.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument Deviation.
-                    """
-
                 class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument NormalAngle.
@@ -12411,6 +12406,11 @@ class Root(PyMenu):
                     Argument MaxEdgeLengthFactor.
                     """
 
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument Deviation.
+                    """
+
                 class _MaxEdgeLength(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument MaxEdgeLength.
@@ -12538,8 +12538,8 @@ class Root(PyMenu):
                     self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
-                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -12603,14 +12603,14 @@ class Root(PyMenu):
                     Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
-                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
+                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
-                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
+                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
                     """
 
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
@@ -12994,8 +12994,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -13025,14 +13025,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -13314,10 +13314,10 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
+                    self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
-                    self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
 
                 class _FacetMaxEdgeLength(PyTextualCommandArgumentsSubItem):
                     """
@@ -13329,9 +13329,9 @@ class Root(PyMenu):
                     Specify a maximum element size for the imported model to avoid very large facets during the file import.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
                     """
 
                 class _Deviation(PyNumericalCommandArgumentsSubItem):
@@ -13344,9 +13344,9 @@ class Root(PyMenu):
                     Select this option when you want to change faceting of the selected object. Refaceting will refacet the original CAD geometry. Only the faceted CAD geometry is used during the meshing process. The refaceting settings control how far the facet edges are from the model and the size of the facets.  More...
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
             class _IgnoreSolidNames(PyParameterCommandArgumentsSubItem):
@@ -14020,14 +14020,14 @@ class Root(PyMenu):
                     self.ConnectLabelWildcard = self._ConnectLabelWildcard(self, "ConnectLabelWildcard", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
                     self.RelativeShareTopologyTolerance = self._RelativeShareTopologyTolerance(self, "RelativeShareTopologyTolerance", service, rules, path)
-                    self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
+                    self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                     self.ExecuteJoinIntersect = self._ExecuteJoinIntersect(self, "ExecuteJoinIntersect", service, rules, path)
                     self.Operation = self._Operation(self, "Operation", service, rules, path)
-                    self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
+                    self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                     self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                    self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
-                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                     self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
+                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                    self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -14056,9 +14056,9 @@ class Root(PyMenu):
                     Specify the relative tolerance for joining or intersecting face pairs, or the relative tolerance for connecting edge and face pairs.
                     """
 
-                class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
+                class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the threshold angle for joining face pairs.
+                    Argument FluidLabelWildcard.
                     """
 
                 class _ExecuteJoinIntersect(PyTextualCommandArgumentsSubItem):
@@ -14071,9 +14071,9 @@ class Root(PyMenu):
                     Choose whether to apply share topology using the Join-Intersect method where you join and/or intersect the problematic faces, or using the Interface Connect method where you connect edges of overlapping face pairs. Note that imprinting of overlapping faces in SCDM/Discovery is highly recommended for the Interface Connect method.
                     """
 
-                class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
+                class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument FluidLabelWildcard.
+                    Specify the threshold angle for joining face pairs.
                     """
 
                 class _STToleranceIncrement(PyNumericalCommandArgumentsSubItem):
@@ -14081,9 +14081,9 @@ class Root(PyMenu):
                     Specify the increment by which the tolerance changes for each attempt to join face pairs.
                     """
 
-                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -14091,9 +14091,9 @@ class Root(PyMenu):
                     Argument PerLabelList.
                     """
 
-                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14118,10 +14118,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -14148,9 +14148,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14163,9 +14163,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
             class _SurfaceMeshPreferences(PySingletonCommandArgumentsSubItem):
@@ -14176,21 +14176,21 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
-                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
+                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
+                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
-                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
                     self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -14198,9 +14198,9 @@ class Root(PyMenu):
                     Argument SMQualityCollapseLimit.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Argument FoldFaceLimit.
                     """
 
                 class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
@@ -14208,19 +14208,19 @@ class Root(PyMenu):
                     Argument SMQualityImprove.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SMSeparationAngle.
+                    Argument ShowSurfaceMeshPreferences.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SMSeparation.
+                    Argument SMSeparationAngle.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ShowSurfaceMeshPreferences.
+                    Argument AutoMerge.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -14228,9 +14228,9 @@ class Root(PyMenu):
                     Argument TVMAutoControlCreation.
                     """
 
-                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument FoldFaceLimit.
+                    Argument SMSeparation.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -14258,9 +14258,9 @@ class Root(PyMenu):
                     Argument SMQualityMaxAngle.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SelfIntersectCheck.
+                    Argument SMQualityImproveLimit.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -14268,9 +14268,9 @@ class Root(PyMenu):
                     Argument AutoSurfaceRemesh.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImproveLimit.
+                    Argument SelfIntersectCheck.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -14362,8 +14362,8 @@ class Root(PyMenu):
                     self.NewLabelObjects = self._NewLabelObjects(self, "NewLabelObjects", service, rules, path)
                     self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
                     self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
-                    self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
                     self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
+                    self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
                     self.NewLabelMax = self._NewLabelMax(self, "NewLabelMax", service, rules, path)
                     self.NewZoneType = self._NewZoneType(self, "NewZoneType", service, rules, path)
                     self.NewLabelCurvature = self._NewLabelCurvature(self, "NewLabelCurvature", service, rules, path)
@@ -14384,14 +14384,14 @@ class Root(PyMenu):
                     Argument NewLabelType.
                     """
 
-                class _NewLabels(PyTextualCommandArgumentsSubItem):
+                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabels.
+                    Argument NewLabelCells.
                     """
 
-                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
+                class _NewLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelCells.
+                    Argument NewLabels.
                     """
 
                 class _NewLabelMax(PyTextualCommandArgumentsSubItem):