ansys-fluent-core 0.34.1__py3-none-any.whl → 0.35.0__py3-none-any.whl

ansys/fluent/core/generated/datamodel_252/meshing.py

@@ -1307,9 +1307,9 @@ class Root(PyMenu):
                         self.Operation = self._Operation(self, "Operation", service, rules, path)
                         self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                         self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                        self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
-                        self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                         self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
+                        self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                        self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
                         self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                         self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -1363,9 +1363,9 @@ class Root(PyMenu):
                         Specify the increment by which the tolerance changes for each attempt to join face pairs.
                         """
 
-                    class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                    class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                         """
-                        Display advanced options that you may want to apply to the task.
+                        Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                         """
 
                     class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -1373,9 +1373,9 @@ class Root(PyMenu):
                         Argument PerLabelList.
                         """
 
-                    class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                    class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                         """
-                        Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                        Display advanced options that you may want to apply to the task.
                         """
 
                     class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -1522,8 +1522,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
                     self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
+                    self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
@@ -1531,14 +1531,14 @@ class Root(PyMenu):
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
-                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _ExposeSide(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowShellBLAdvancedOptions.
+                    Argument ExposeSide.
                     """
 
-                class _ExposeSide(PyTextualCommandArgumentsSubItem):
+                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExposeSide.
+                    Argument ShowShellBLAdvancedOptions.
                     """
 
                 class _MaxAspectRatio(PyNumericalCommandArgumentsSubItem):
@@ -2093,9 +2093,9 @@ class Root(PyMenu):
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -2140,6 +2140,11 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument LastRatioNumLayers.
+                    """
+
                 class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
                     Display advanced options that you may want to apply to this task.
@@ -2150,11 +2155,6 @@ class Root(PyMenu):
                     Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument LastRatioNumLayers.
-                    """
-
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
                     """
                     Controls the tangency of the invalid normal faces. An invalid normal location with all 90 degree angles has a tangency of 1. So, faces are still treated as an invalid normal even if the angle deviates slightly from 90 degrees (resulting in a tangency of 0.98).
@@ -2395,9 +2395,9 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
-                    self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
                     self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
@@ -2448,6 +2448,11 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
+                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the increase in element edge length with each succeeding layer of elements.
+                    """
+
                 class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
                     Choose the type of sizing control (curvature, proximity, soft, or boi).
@@ -2458,11 +2463,6 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
-                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the increase in element edge length with each succeeding layer of elements.
-                    """
-
                 class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
@@ -2999,8 +2999,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -3030,14 +3030,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -4599,13 +4599,13 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
@@ -4644,19 +4644,19 @@ class Root(PyMenu):
                     Argument AspectRatio.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument Rate.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -4674,9 +4674,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument NumberOfLayers.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -4732,15 +4732,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -4774,9 +4774,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -4784,9 +4784,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -4809,14 +4809,14 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Y-Offset.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument X2.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -5187,12 +5187,12 @@ class Root(PyMenu):
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
@@ -5236,9 +5236,9 @@ class Root(PyMenu):
                     Argument Rate.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument NumberOfLayers.
                     """
 
                 class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
@@ -5261,9 +5261,9 @@ class Root(PyMenu):
                     Choose a single edge zone from the list below for your edge-based collar mesh. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -5325,9 +5325,9 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5391,6 +5391,11 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument Y-Offset.
+                    """
+
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument X2.
@@ -5401,11 +5406,6 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument Y-Offset.
-                    """
-
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -5460,8 +5460,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
@@ -5470,8 +5470,8 @@ class Root(PyMenu):
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
+                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -5479,14 +5479,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -5529,14 +5529,14 @@ class Root(PyMenu):
                     Specify the x-coordinate of the offset collar mesh.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the z-coordinate of the offset collar mesh.
+                    Argument CylinderRadius2.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderRadius2.
+                    Specify the z-coordinate of the offset collar mesh.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -5774,13 +5774,13 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
@@ -5819,9 +5819,9 @@ class Root(PyMenu):
                     Specify the ratio of the prism base length to the prism layer height.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select the number of boundary layers to be generated.
+                    Specify the rate of growth of the boundary layer.
                     """
 
                 class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
@@ -5829,9 +5829,9 @@ class Root(PyMenu):
                     Argument WakeGrowthFactor.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the rate of growth of the boundary layer.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5849,9 +5849,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Select the number of boundary layers to be generated.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -5907,15 +5907,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5949,9 +5949,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -5959,9 +5959,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -5979,11 +5979,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
-                    """
-                    Argument Node2.
-                    """
-
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument X2.
@@ -5994,6 +5989,11 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
+                class _Node2(PyTextualCommandArgumentsSubItem):
+                    """
+                    Argument Node2.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -6048,8 +6048,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
@@ -6058,8 +6058,8 @@ class Root(PyMenu):
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
+                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -6067,14 +6067,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -6117,14 +6117,14 @@ class Root(PyMenu):
                     Argument BoxCenterX.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderRadius2.
+                    Argument BoxCenterZ.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxCenterZ.
+                    Argument CylinderRadius2.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -6891,7 +6891,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6902,16 +6902,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the refinement region as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6964,9 +6964,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -6982,17 +6982,17 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -7027,19 +7027,19 @@ class Root(PyMenu):
                     Argument AspectRatio.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the factor by which the refinement region expands in the wake of the flow direction.
+                    Argument Rate.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Specify the factor by which the refinement region expands in the wake of the flow direction.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Specify the number of boundary layers that are to be captured in the refinement region.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -7057,9 +7057,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of boundary layers that are to be captured in the refinement region.
+                    Argument NumberOfLayers.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -7072,14 +7072,14 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument OffsetMethodType.
+                    Reverses the orientation of the refinement region.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Reverses the orientation of the refinement region.
+                    Argument OffsetMethodType.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -7115,15 +7115,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -7157,9 +7157,9 @@ class Root(PyMenu):
                     Specify the Z-coordinate for the offset of the initial position of the cylinder.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate of the first position of the cylinder.
+                    Specify the Z-coordinate of the second position of the cylinder.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -7167,9 +7167,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate of the second position of the cylinder.
+                    Specify the Z-coordinate of the first position of the cylinder.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -7187,9 +7187,9 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
+                    Specify the X-coordinate of the second position of the cylinder.
                     """
 
                 class _Node2(PyTextualCommandArgumentsSubItem):
@@ -7197,9 +7197,9 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate of the second position of the cylinder.
+                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -7256,18 +7256,18 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
+                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
+                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -7275,14 +7275,14 @@ class Root(PyMenu):
                     Specify the Z-coordinate of the second position of the cylinder.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate of the second position of the cylinder.
+                    Argument BoxYLength.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Specify the X-coordinate of the second position of the cylinder.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -7290,9 +7290,9 @@ class Root(PyMenu):
                     Specify the X-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -7300,9 +7300,9 @@ class Root(PyMenu):
                     Specify the Y-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -7325,14 +7325,14 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
+                    Specify the radius of the cylinder at the second position.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the radius of the cylinder at the second position.
+                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -7537,10 +7537,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
-                    self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.Thickness = self._Thickness(self, "Thickness", service, rules, path)
                     self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
+                    self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
+                    self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
                     self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.BufferSize = self._BufferSize(self, "BufferSize", service, rules, path)
@@ -7553,24 +7553,24 @@ class Root(PyMenu):
                     Specify the number of layers, or divisions, along the thickness of the porous region.
                     """
 
-                class _LabelSelectionList(PyTextualCommandArgumentsSubItem):
+                class _Thickness(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Specify the thickness (or the total height) of the porous region.
                     """
 
-                class _SelectionType(PyTextualCommandArgumentsSubItem):
+                class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose how you want to make your selection (by object, zone, or label).
+                    Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _Thickness(PyNumericalCommandArgumentsSubItem):
+                class _SelectionType(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the thickness (or the total height) of the porous region.
+                    Choose how you want to make your selection (by object, zone, or label).
                     """
 
-                class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
+                class _LabelSelectionList(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
                 class _MeshSize(PyNumericalCommandArgumentsSubItem):
@@ -7911,10 +7911,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.PorousRegions = self._PorousRegions(self, "PorousRegions", service, rules, path)
-                    self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
-                    self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
-                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
+                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
+                    self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
                     self.ExtractEdgeFeatures = self._ExtractEdgeFeatures(self, "ExtractEdgeFeatures", service, rules, path)
                     self.MovingObjects = self._MovingObjects(self, "MovingObjects", service, rules, path)
                     self.EnablePrimeWrapper = self._EnablePrimeWrapper(self, "EnablePrimeWrapper", service, rules, path)
@@ -7926,24 +7926,24 @@ class Root(PyMenu):
                     Specify whether or not you will have any porous regions in your geometry. If so, then a Create Porous Regions task will be added to the workflow. A simple primitive rectangle will be placed over complex and detailed geometry of a porous region (for example, fins and tubes of a heat exchanger).  With buffer layer:
                     """
 
-                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
+                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument CloseLeakages.
+                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
                     """
 
-                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
+                    Display advanced options that you may want to apply to the workflow.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the workflow.
+                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
                     """
 
-                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
+                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
+                    Argument CloseLeakages.
                     """
 
                 class _ExtractEdgeFeatures(PyTextualCommandArgumentsSubItem):
@@ -8393,9 +8393,9 @@ class Root(PyMenu):
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.LocalRemesh = self._LocalRemesh(self, "LocalRemesh", service, rules, path)
                     self.RemeshGrowthRate = self._RemeshGrowthRate(self, "RemeshGrowthRate", service, rules, path)
-                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
-                    self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
+                    self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
+                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
                     self.ShowPrism2DPreferences = self._ShowPrism2DPreferences(self, "ShowPrism2DPreferences", service, rules, path)
                     self.nOrthogonalLayers = self._nOrthogonalLayers(self, "nOrthogonalLayers", service, rules, path)
 
@@ -8424,9 +8424,9 @@ class Root(PyMenu):
                     Argument RemeshGrowthRate.
                     """
 
-                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
+                class _GapFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MaxFaceSkew.
+                    Argument GapFactor.
                     """
 
                 class _RefineStretchedQuads(PyTextualCommandArgumentsSubItem):
@@ -8434,9 +8434,9 @@ class Root(PyMenu):
                     Argument RefineStretchedQuads.
                     """
 
-                class _GapFactor(PyNumericalCommandArgumentsSubItem):
+                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument GapFactor.
+                    Argument MaxFaceSkew.
                     """
 
                 class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
@@ -8780,8 +8780,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -8811,14 +8811,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -9308,17 +9308,17 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
-                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
-                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
+                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
@@ -9334,9 +9334,9 @@ class Root(PyMenu):
                     Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
+                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
                     """
 
                 class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
@@ -9344,14 +9344,14 @@ class Root(PyMenu):
                     Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Argument AutoMerge.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -9359,9 +9359,9 @@ class Root(PyMenu):
                     If your geometry contains small edges, you can choose to extract these edge features when generating the surface mesh by selecting yes. Note that selecting yes , will always extract small edge features regardless of your selection for the Auto Remesh to Remove Clustering? option.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -9374,9 +9374,9 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -9384,9 +9384,9 @@ class Root(PyMenu):
                     Choose whether or not to automatically assign boundary types to zones.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
                 class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
@@ -9493,11 +9493,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -9529,19 +9529,19 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportNamedSelections.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -9549,9 +9549,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
             class _ShareTopologyPreferences(PySingletonCommandArgumentsSubItem):
@@ -9566,10 +9566,10 @@ class Root(PyMenu):
                     self.ConnectLabelWildcard = self._ConnectLabelWildcard(self, "ConnectLabelWildcard", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
                     self.RelativeShareTopologyTolerance = self._RelativeShareTopologyTolerance(self, "RelativeShareTopologyTolerance", service, rules, path)
-                    self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
+                    self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                     self.ExecuteJoinIntersect = self._ExecuteJoinIntersect(self, "ExecuteJoinIntersect", service, rules, path)
                     self.Operation = self._Operation(self, "Operation", service, rules, path)
-                    self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
+                    self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                     self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
                     self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
                     self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
@@ -9602,9 +9602,9 @@ class Root(PyMenu):
                     Specify the relative tolerance for joining or intersecting face pairs, or the relative tolerance for connecting edge and face pairs.
                     """
 
-                class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
+                class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the threshold angle for joining face pairs.
+                    Argument FluidLabelWildcard.
                     """
 
                 class _ExecuteJoinIntersect(PyTextualCommandArgumentsSubItem):
@@ -9617,9 +9617,9 @@ class Root(PyMenu):
                     Choose whether to apply share topology using the Join-Intersect method where you join and/or intersect the problematic faces, or using the Interface Connect method where you connect edges of overlapping face pairs. Note that imprinting of overlapping faces in SCDM/Discovery is highly recommended for the Interface Connect method.
                     """
 
-                class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
+                class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument FluidLabelWildcard.
+                    Specify the threshold angle for joining face pairs.
                     """
 
                 class _STToleranceIncrement(PyNumericalCommandArgumentsSubItem):
@@ -10032,9 +10032,9 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
-                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
                     self.HexMinCellLength = self._HexMinCellLength(self, "HexMinCellLength", service, rules, path)
+                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
+                    self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
                     self.Type = self._Type(self, "Type", service, rules, path)
                     self.CellSizing = self._CellSizing(self, "CellSizing", service, rules, path)
                     self.HexMaxSize = self._HexMaxSize(self, "HexMaxSize", service, rules, path)
@@ -10047,9 +10047,9 @@ class Root(PyMenu):
                     Argument MaxSize.
                     """
 
-                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
+                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
+                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
                     """
 
                 class _TetPolyMaxCellLength(PyNumericalCommandArgumentsSubItem):
@@ -10057,9 +10057,9 @@ class Root(PyMenu):
                     The maximum cell length for either the tetrahedron, polyhedron, or poly-hexcore volume fill types.
                     """
 
-                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
+                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
+                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
                     """
 
                 class _Type(PyTextualCommandArgumentsSubItem):
@@ -10114,34 +10114,34 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
-                    self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
-                    self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
-                    self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
                     self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
+                    self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
+                    self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
                     self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
-                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
+                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
+                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
                     self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
                     self.AddMultipleQualityMethods = self._AddMultipleQualityMethods(self, "AddMultipleQualityMethods", service, rules, path)
                     self.MaxCellSizeChange = self._MaxCellSizeChange(self, "MaxCellSizeChange", service, rules, path)
                     self.WritePrismControlFile = self._WritePrismControlFile(self, "WritePrismControlFile", service, rules, path)
-                    self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
+                    self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
                     self.CheckSelfProximity = self._CheckSelfProximity(self, "CheckSelfProximity", service, rules, path)
                     self.Avoid1_8Transition = self._Avoid1_8Transition(self, "Avoid1_8Transition", service, rules, path)
-                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
-                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
+                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
+                    self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
                     self.SolidGrowthRate = self._SolidGrowthRate(self, "SolidGrowthRate", service, rules, path)
-                    self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
+                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.QualityWarningLimit = self._QualityWarningLimit(self, "QualityWarningLimit", service, rules, path)
 
-                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
+                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
                     """
 
-                class _QualityMethod(PyTextualCommandArgumentsSubItem):
+                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
+                    Specify the angle to preserve features when using a polyhedral-based mesh.
                     """
 
                 class _MinPolySize(PyNumericalCommandArgumentsSubItem):
@@ -10149,24 +10149,24 @@ class Root(PyMenu):
                     Argument MinPolySize.
                     """
 
-                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the angle to preserve features when using a polyhedral-based mesh.
+                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
                     """
 
-                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
+                class _UseSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
+                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
                     """
 
-                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
+                class _QualityMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
+                    Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
                     """
 
-                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
+                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
@@ -10189,9 +10189,9 @@ class Root(PyMenu):
                     Indicate whether or not you want to save a .pzmcontrol file to your working folder that will contain the boundary (prism) layer specifications.
                     """
 
-                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
+                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MinFaceArea.
+                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
                     """
 
                 class _CheckSelfProximity(PyTextualCommandArgumentsSubItem):
@@ -10204,14 +10204,14 @@ class Root(PyMenu):
                     Indicate whether or not you want to avoid any potential 1:8 cell transition in the hexcore region of the volume mesh, replacing any abrupt change in the cell size with polyhedral cells to improve solver performance in such transitional areas.
                     """
 
-                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
                     """
 
-                class _TetInSolids(PyTextualCommandArgumentsSubItem):
+                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument TetInSolids.
+                    Argument MinFaceArea.
                     """
 
                 class _SolidGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -10219,9 +10219,9 @@ class Root(PyMenu):
                     Specify the rate of growth for a tetrahedron or polyhedron mesh.
                     """
 
-                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
+                class _TetInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
+                    Argument TetInSolids.
                     """
 
                 class _QualityWarningLimit(PyNumericalCommandArgumentsSubItem):
@@ -10316,19 +10316,19 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.ShowGlobalThinVolumePreferences = self._ShowGlobalThinVolumePreferences(self, "ShowGlobalThinVolumePreferences", service, rules, path)
+                    self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
                     self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
 
-                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    Display global settings for thin volume meshing.
                     """
 
-                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
+                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display global settings for thin volume meshing.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
                 class _StairStep(PyTextualCommandArgumentsSubItem):
@@ -10743,10 +10743,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -10773,9 +10773,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -10788,9 +10788,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
         def create_instance(self) -> _GeometrySetupCommandArguments:
@@ -10999,15 +10999,15 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
@@ -11017,14 +11017,14 @@ class Root(PyMenu):
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -11047,9 +11047,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -11057,9 +11057,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -11622,10 +11622,10 @@ class Root(PyMenu):
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
-                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11662,14 +11662,14 @@ class Root(PyMenu):
                     Argument UsePartOrBodyAsSuffix.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11677,9 +11677,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument ImportNamedSelections.
                     """
 
         def create_instance(self) -> _ImportBodyOfInfluenceGeometryCommandArguments:
@@ -11769,21 +11769,21 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
+                    self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
                     self.FacetedBodies = self._FacetedBodies(self, "FacetedBodies", service, rules, path)
                     self.CISeparation = self._CISeparation(self, "CISeparation", service, rules, path)
-                    self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
+                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
                     self.CIRefaceting = self._CIRefaceting(self, "CIRefaceting", service, rules, path)
                     self.AutomaticObjectCreation = self._AutomaticObjectCreation(self, "AutomaticObjectCreation", service, rules, path)
                     self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
                     self.MaxFacetLength = self._MaxFacetLength(self, "MaxFacetLength", service, rules, path)
                     self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
                     self.CISeparationAngle = self._CISeparationAngle(self, "CISeparationAngle", service, rules, path)
-                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
+                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
 
-                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
+                class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
+                    Argument ExtractAngle.
                     """
 
                 class _FacetedBodies(PyTextualCommandArgumentsSubItem):
@@ -11796,9 +11796,9 @@ class Root(PyMenu):
                     Choose whether or not you are going to separate zones upon import based on a region, a region and a specified separation angle, a face, or neither. This is required to select faces for local sizing. If Named Selections have already been defined at these locations, then separation is not needed.
                     """
 
-                class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
+                class _CITolerence(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ExtractAngle.
+                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
                     """
 
                 class _CIRefaceting(PyParameterCommandArgumentsSubItem):
@@ -11831,9 +11831,9 @@ class Root(PyMenu):
                     Specify the angle at which features will be extracted from the CAD model on import. Assigning a smaller separation angle will produce more zones.
                     """
 
-                class _CITolerence(PyNumericalCommandArgumentsSubItem):
+                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
+                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
                     """
 
             class _FileName(PyTextualCommandArgumentsSubItem):
@@ -11885,10 +11885,10 @@ class Root(PyMenu):
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
-                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11925,9 +11925,9 @@ class Root(PyMenu):
                     Argument ImportCurvatureDataFromCAD.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
                 class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
@@ -11940,9 +11940,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportNamedSelections.
                     """
 
         def create_instance(self) -> _ImportGeometryCommandArguments:
@@ -12007,10 +12007,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -12037,9 +12037,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate if there are any small imperfections (ledge or step artifacts from the original CAD geometry) that can be removed as part of this task. If you select yes, then you must specify a Max Step Width and the Step Skewness Quality Limit.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -12052,9 +12052,9 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate if there are any small imperfections (ledge or step artifacts from the original CAD geometry) that can be removed as part of this task. If you select yes, then you must specify a Max Step Width and the Step Skewness Quality Limit.
                     """
 
         def create_instance(self) -> _ImproveSurfaceMeshCommandArguments:
@@ -12268,8 +12268,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.FirstNumber = self._FirstNumber(self, "FirstNumber", service, rules, path)
-                    self.NbCellsPerUnit = self._NbCellsPerUnit(self, "NbCellsPerUnit", service, rules, path)
                     self.CustomPatternString = self._CustomPatternString(self, "CustomPatternString", service, rules, path)
+                    self.NbCellsPerUnit = self._NbCellsPerUnit(self, "NbCellsPerUnit", service, rules, path)
                     self.InvokeBatteryModelingOptions = self._InvokeBatteryModelingOptions(self, "InvokeBatteryModelingOptions", service, rules, path)
                     self.UseCustomPattern = self._UseCustomPattern(self, "UseCustomPattern", service, rules, path)
 
@@ -12278,14 +12278,14 @@ class Root(PyMenu):
                     Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.  More...
                     """
 
-                class _NbCellsPerUnit(PyNumericalCommandArgumentsSubItem):
+                class _CustomPatternString(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.   More...
+                    Argument CustomPatternString.
                     """
 
-                class _CustomPatternString(PyTextualCommandArgumentsSubItem):
+                class _NbCellsPerUnit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CustomPatternString.
+                    Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.   More...
                     """
 
                 class _InvokeBatteryModelingOptions(PyTextualCommandArgumentsSubItem):
@@ -12379,8 +12379,8 @@ class Root(PyMenu):
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.FacetResolution = self._FacetResolution(self, "FacetResolution", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.MaxEdgeLength = self._MaxEdgeLength(self, "MaxEdgeLength", service, rules, path)
                     self.CustomNormalAngle = self._CustomNormalAngle(self, "CustomNormalAngle", service, rules, path)
                     self.CustomDeviation = self._CustomDeviation(self, "CustomDeviation", service, rules, path)
@@ -12401,14 +12401,14 @@ class Root(PyMenu):
                     Argument MaxEdgeLengthFactor.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NormalAngle.
+                    Argument Deviation.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Deviation.
+                    Argument NormalAngle.
                     """
 
                 class _MaxEdgeLength(PyNumericalCommandArgumentsSubItem):
@@ -12535,9 +12535,9 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
+                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
                     self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
@@ -12588,11 +12588,6 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
-                    """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
-                    """
-
                 class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the increase in element edge length with each succeeding layer of elements.
@@ -12603,6 +12598,11 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
+                class _SizingType(PyTextualCommandArgumentsSubItem):
+                    """
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    """
+
                 class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
@@ -13314,10 +13314,10 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
-                    self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
+                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
 
                 class _FacetMaxEdgeLength(PyTextualCommandArgumentsSubItem):
                     """
@@ -13329,14 +13329,14 @@ class Root(PyMenu):
                     Specify a maximum element size for the imported model to avoid very large facets during the file import.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
                     """
 
                 class _Refacet(PyParameterCommandArgumentsSubItem):
@@ -13344,9 +13344,9 @@ class Root(PyMenu):
                     Select this option when you want to change faceting of the selected object. Refaceting will refacet the original CAD geometry. Only the faceted CAD geometry is used during the meshing process. The refaceting settings control how far the facet edges are from the model and the size of the facets.  More...
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
+                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
                     """
 
             class _IgnoreSolidNames(PyParameterCommandArgumentsSubItem):
@@ -13409,8 +13409,8 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.RefacetDuringLoad = self._RefacetDuringLoad(self, "RefacetDuringLoad", service, rules, path)
-                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
+                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
 
                 class _MaxSize(PyNumericalCommandArgumentsSubItem):
                     """
@@ -13422,14 +13422,14 @@ class Root(PyMenu):
                     This option is available when DSCO is selected for the Import Route. When enabled, this option will refacet the geometry as it is converted to a .fmd file. This option eliminates the need for any refaceting operation after the geometry is loaded, which can be expensive.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
                     """
 
         def create_instance(self) -> _PartManagementCommandArguments:
@@ -14025,9 +14025,9 @@ class Root(PyMenu):
                     self.Operation = self._Operation(self, "Operation", service, rules, path)
                     self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                     self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                    self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
-                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                     self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
+                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                    self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -14081,9 +14081,9 @@ class Root(PyMenu):
                     Specify the increment by which the tolerance changes for each attempt to join face pairs.
                     """
 
-                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -14091,9 +14091,9 @@ class Root(PyMenu):
                     Argument PerLabelList.
                     """
 
-                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14118,10 +14118,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -14148,9 +14148,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14163,9 +14163,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
             class _SurfaceMeshPreferences(PySingletonCommandArgumentsSubItem):
@@ -14176,21 +14176,21 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
-                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
-                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
-                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
                     self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
+                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
+                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
                     self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -14198,14 +14198,14 @@ class Root(PyMenu):
                     Argument SMQualityCollapseLimit.
                     """
 
-                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument FoldFaceLimit.
+                    Argument AutoMerge.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImprove.
+                    Argument SMSeparation.
                     """
 
                 class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
@@ -14213,14 +14213,14 @@ class Root(PyMenu):
                     Argument SMSeparationAngle.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SMSeparation.
+                    Argument ShowSurfaceMeshPreferences.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Argument SMQualityImprove.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -14228,9 +14228,9 @@ class Root(PyMenu):
                     Argument TVMAutoControlCreation.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ShowSurfaceMeshPreferences.
+                    Argument FoldFaceLimit.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -14258,9 +14258,9 @@ class Root(PyMenu):
                     Argument VolumeMeshMaxSize.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImproveLimit.
+                    Argument SelfIntersectCheck.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -14268,9 +14268,9 @@ class Root(PyMenu):
                     Argument AutoSurfaceRemesh.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SelfIntersectCheck.
+                    Argument SMQualityImproveLimit.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -14360,10 +14360,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.NewLabelObjects = self._NewLabelObjects(self, "NewLabelObjects", service, rules, path)
-                    self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
-                    self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
                     self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
+                    self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
                     self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
+                    self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
                     self.NewLabelMax = self._NewLabelMax(self, "NewLabelMax", service, rules, path)
                     self.NewZoneType = self._NewZoneType(self, "NewZoneType", service, rules, path)
                     self.NewLabelCurvature = self._NewLabelCurvature(self, "NewLabelCurvature", service, rules, path)
@@ -14374,9 +14374,9 @@ class Root(PyMenu):
                     Argument NewLabelObjects.
                     """
 
-                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
+                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelCells.
+                    Argument NewLabelResolution.
                     """
 
                 class _NewLabelType(PyTextualCommandArgumentsSubItem):
@@ -14384,14 +14384,14 @@ class Root(PyMenu):
                     Argument NewLabelType.
                     """
 
-                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
+                class _NewLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelResolution.
+                    Argument NewLabels.
                     """
 
-                class _NewLabels(PyTextualCommandArgumentsSubItem):
+                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabels.
+                    Argument NewLabelCells.
                     """
 
                 class _NewLabelMax(PyTextualCommandArgumentsSubItem):