ansys-fluent-core 0.32.dev1__py3-none-any.whl → 0.32.2__py3-none-any.whl

ansys/fluent/core/generated/datamodel_252/meshing.py

@@ -1302,14 +1302,14 @@ class Root(PyMenu):
                         self.ConnectLabelWildcard = self._ConnectLabelWildcard(self, "ConnectLabelWildcard", service, rules, path)
                         self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
                         self.RelativeShareTopologyTolerance = self._RelativeShareTopologyTolerance(self, "RelativeShareTopologyTolerance", service, rules, path)
-                        self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
+                        self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                         self.ExecuteJoinIntersect = self._ExecuteJoinIntersect(self, "ExecuteJoinIntersect", service, rules, path)
                         self.Operation = self._Operation(self, "Operation", service, rules, path)
-                        self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
+                        self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                         self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                        self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
-                        self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                         self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
+                        self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                        self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
                         self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                         self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -1338,9 +1338,9 @@ class Root(PyMenu):
                         Specify the relative tolerance for joining or intersecting face pairs, or the relative tolerance for connecting edge and face pairs.
                         """
 
-                    class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
+                    class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
                         """
-                        Specify the threshold angle for joining face pairs.
+                        Argument FluidLabelWildcard.
                         """
 
                     class _ExecuteJoinIntersect(PyTextualCommandArgumentsSubItem):
@@ -1353,9 +1353,9 @@ class Root(PyMenu):
                         Choose whether to apply share topology using the Join-Intersect method where you join and/or intersect the problematic faces, or using the Interface Connect method where you connect edges of overlapping face pairs. Note that imprinting of overlapping faces in SCDM/Discovery is highly recommended for the Interface Connect method.
                         """
 
-                    class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
+                    class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
                         """
-                        Argument FluidLabelWildcard.
+                        Specify the threshold angle for joining face pairs.
                         """
 
                     class _STToleranceIncrement(PyNumericalCommandArgumentsSubItem):
@@ -1363,9 +1363,9 @@ class Root(PyMenu):
                         Specify the increment by which the tolerance changes for each attempt to join face pairs.
                         """
 
-                    class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                    class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                         """
-                        Display advanced options that you may want to apply to the task.
+                        Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                         """
 
                     class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -1373,9 +1373,9 @@ class Root(PyMenu):
                         Argument PerLabelList.
                         """
 
-                    class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                    class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                         """
-                        Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                        Display advanced options that you may want to apply to the task.
                         """
 
                     class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -1772,9 +1772,9 @@ class Root(PyMenu):
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
-                    self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
+                    self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
+                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -1819,9 +1819,9 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
-                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    Argument LastRatioNumLayers.
                     """
 
                 class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
@@ -1829,9 +1829,9 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to this task.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
                     """
 
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
@@ -2090,11 +2090,11 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
+                    self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
+                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
@@ -2125,14 +2125,14 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
+                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
+                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
                 class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
@@ -2140,14 +2140,14 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
-                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    Display advanced options that you may want to apply to this task.
                     """
 
-                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
+                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to this task.
+                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
                     """
 
                 class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
@@ -2395,11 +2395,11 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
-                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
-                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -2448,6 +2448,11 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
+                class _SizingType(PyTextualCommandArgumentsSubItem):
+                    """
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    """
+
                 class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the increase in element edge length with each succeeding layer of elements.
@@ -2458,9 +2463,9 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
                 class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
@@ -2468,11 +2473,6 @@ class Root(PyMenu):
                     Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
                     """
 
-                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
-                    """
-
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
                     """
                     Enable this field to display the target size control in the graphics window.
@@ -2999,8 +2999,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
                     self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
+                    self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -3030,14 +3030,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -3253,8 +3253,8 @@ class Root(PyMenu):
                     self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
@@ -3278,14 +3278,14 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument LastRatioNumLayers.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Argument LastRatioPercentage.
                     """
 
                 class _GapFactor(PyNumericalCommandArgumentsSubItem):
@@ -4598,16 +4598,16 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
-                    self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.X = self._X(self, "X", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
@@ -4639,9 +4639,9 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument AspectRatio.
                     """
 
                 class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
@@ -4649,14 +4649,14 @@ class Root(PyMenu):
                     Argument WakeGrowthFactor.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument NumberOfLayers.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -4679,14 +4679,14 @@ class Root(PyMenu):
                     Argument Rate.
                     """
 
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument X.
                     """
 
                 class _FlipDirection(PyParameterCommandArgumentsSubItem):
@@ -4726,32 +4726,32 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -4774,9 +4774,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -4784,9 +4784,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -4804,6 +4804,11 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
+                class _Node2(PyTextualCommandArgumentsSubItem):
+                    """
+                    Argument Node2.
+                    """
+
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument X2.
@@ -4814,11 +4819,6 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
-                    """
-                    Argument Node2.
-                    """
-
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -4873,18 +4873,18 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
+                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
+                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -4892,14 +4892,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -4907,9 +4907,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -4917,9 +4917,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -4942,14 +4942,14 @@ class Root(PyMenu):
                     Argument BoxCenterX.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxCenterZ.
+                    Argument CylinderRadius2.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderRadius2.
+                    Argument BoxCenterZ.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -5185,16 +5185,16 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
@@ -5226,9 +5226,9 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument AspectRatio.
                     """
 
                 class _Rate(PyNumericalCommandArgumentsSubItem):
@@ -5241,9 +5241,9 @@ class Root(PyMenu):
                     Argument NumberOfLayers.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5261,19 +5261,19 @@ class Root(PyMenu):
                     Choose a single edge zone from the list below for your edge-based collar mesh. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Specify the x-coordinate of the offset collar mesh.
                     """
 
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the x-coordinate of the offset collar mesh.
+                    Argument LastRatioPercentage.
                     """
 
                 class _FlipDirection(PyParameterCommandArgumentsSubItem):
@@ -5313,32 +5313,32 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -5361,9 +5361,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -5371,9 +5371,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -5396,14 +5396,14 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument X2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Y-Offset.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -5460,8 +5460,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
@@ -5479,14 +5479,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -5683,7 +5683,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -5694,16 +5694,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the component mesh as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -5756,9 +5756,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -5774,17 +5774,17 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
-                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5819,9 +5819,9 @@ class Root(PyMenu):
                     Specify the ratio of the prism base length to the prism layer height.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the rate of growth of the boundary layer.
+                    Select the number of boundary layers to be generated.
                     """
 
                 class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
@@ -5849,9 +5849,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select the number of boundary layers to be generated.
+                    Specify the rate of growth of the boundary layer.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -5864,14 +5864,14 @@ class Root(PyMenu):
                     Specify the offset height of the last layer as a percentage of the local base mesh size.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose the method that will be used to create the boundary layer, or prism, controls.
+                    Argument FlipDirection.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Choose the method that will be used to create the boundary layer, or prism, controls.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -5913,9 +5913,9 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5979,11 +5979,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument X2.
-                    """
-
                 class _Node2(PyTextualCommandArgumentsSubItem):
                     """
                     Argument Node2.
@@ -5994,6 +5989,11 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
+                class _X2(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument X2.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -6048,12 +6048,12 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
@@ -6067,14 +6067,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -6082,9 +6082,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -6092,9 +6092,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -6891,7 +6891,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6902,16 +6902,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the refinement region as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6964,9 +6964,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -6984,15 +6984,15 @@ class Root(PyMenu):
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
-                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -7037,9 +7037,9 @@ class Root(PyMenu):
                     Specify the number of boundary layers that are to be captured in the refinement region.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Specify the factor by which the refinement region expands in the wake of the flow direction.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -7057,9 +7057,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the factor by which the refinement region expands in the wake of the flow direction.
+                    Argument NumberOfLayers.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -7072,14 +7072,14 @@ class Root(PyMenu):
                     Argument LastRatioPercentage.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument OffsetMethodType.
+                    Reverses the orientation of the refinement region.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Reverses the orientation of the refinement region.
+                    Argument OffsetMethodType.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -7109,8 +7109,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
@@ -7121,20 +7121,20 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Specify the X-coordinate for the offset of the initial position of the cylinder.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the offset of the initial position of the cylinder.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -7187,11 +7187,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
-                    """
-
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the X-coordinate of the second position of the cylinder.
@@ -7202,6 +7197,11 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -7256,18 +7256,18 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
+                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -7275,14 +7275,14 @@ class Root(PyMenu):
                     Specify the Z-coordinate of the second position of the cylinder.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Specify the X-coordinate of the second position of the cylinder.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate of the second position of the cylinder.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -7290,9 +7290,9 @@ class Root(PyMenu):
                     Specify the X-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -7300,9 +7300,9 @@ class Root(PyMenu):
                     Specify the Y-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -7325,14 +7325,14 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the radius of the cylinder at the second position.
+                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
+                    Specify the radius of the cylinder at the second position.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -7541,8 +7541,8 @@ class Root(PyMenu):
                     self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
                     self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
-                    self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
+                    self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.BufferSize = self._BufferSize(self, "BufferSize", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.NonRectangularBufferSize = self._NonRectangularBufferSize(self, "NonRectangularBufferSize", service, rules, path)
@@ -7573,14 +7573,14 @@ class Root(PyMenu):
                     Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _MeshSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the angle at which features will be extracted for the porous region.
+                    Specify the cell size for the porous region mesh.
                     """
 
-                class _MeshSize(PyNumericalCommandArgumentsSubItem):
+                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the cell size for the porous region mesh.
+                    Specify the angle at which features will be extracted for the porous region.
                     """
 
                 class _BufferSize(PyNumericalCommandArgumentsSubItem):
@@ -7911,10 +7911,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.PorousRegions = self._PorousRegions(self, "PorousRegions", service, rules, path)
-                    self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
-                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
                     self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
+                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
                     self.ExtractEdgeFeatures = self._ExtractEdgeFeatures(self, "ExtractEdgeFeatures", service, rules, path)
                     self.MovingObjects = self._MovingObjects(self, "MovingObjects", service, rules, path)
                     self.EnablePrimeWrapper = self._EnablePrimeWrapper(self, "EnablePrimeWrapper", service, rules, path)
@@ -7926,24 +7926,24 @@ class Root(PyMenu):
                     Specify whether or not you will have any porous regions in your geometry. If so, then a Create Porous Regions task will be added to the workflow. A simple primitive rectangle will be placed over complex and detailed geometry of a porous region (for example, fins and tubes of a heat exchanger).  With buffer layer:
                     """
 
-                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
+                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
+                    Argument CloseLeakages.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the workflow.
+                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
                     """
 
-                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CloseLeakages.
+                    Display advanced options that you may want to apply to the workflow.
                     """
 
-                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
+                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
+                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
                     """
 
                 class _ExtractEdgeFeatures(PyTextualCommandArgumentsSubItem):
@@ -8287,16 +8287,16 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.BiasMethod = self._BiasMethod(self, "BiasMethod", service, rules, path)
-                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
                     self.MaxLayerHeight = self._MaxLayerHeight(self, "MaxLayerHeight", service, rules, path)
-                    self.MergeCellZones = self._MergeCellZones(self, "MergeCellZones", service, rules, path)
+                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
+                    self.BiasMethod = self._BiasMethod(self, "BiasMethod", service, rules, path)
                     self.BiasMethodControl = self._BiasMethodControl(self, "BiasMethodControl", service, rules, path)
+                    self.MergeCellZones = self._MergeCellZones(self, "MergeCellZones", service, rules, path)
                     self.ShowVMExtrudePreferences = self._ShowVMExtrudePreferences(self, "ShowVMExtrudePreferences", service, rules, path)
 
-                class _BiasMethod(PyTextualCommandArgumentsSubItem):
+                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
+                    Argument MaxLayerHeight.
                     """
 
                 class _MidSpanLength(PyNumericalCommandArgumentsSubItem):
@@ -8304,19 +8304,19 @@ class Root(PyMenu):
                     Argument MidSpanLength.
                     """
 
-                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
+                class _BiasMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MaxLayerHeight.
+                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
                     """
 
-                class _MergeCellZones(PyParameterCommandArgumentsSubItem):
+                class _BiasMethodControl(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate whether or not you want to merge the extruded layers with any adjacent regions.
+                    Argument BiasMethodControl.
                     """
 
-                class _BiasMethodControl(PyTextualCommandArgumentsSubItem):
+                class _MergeCellZones(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument BiasMethodControl.
+                    Indicate whether or not you want to merge the extruded layers with any adjacent regions.
                     """
 
                 class _ShowVMExtrudePreferences(PyParameterCommandArgumentsSubItem):
@@ -8393,10 +8393,10 @@ class Root(PyMenu):
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.RemeshGrowthRate = self._RemeshGrowthRate(self, "RemeshGrowthRate", service, rules, path)
                     self.LocalRemesh = self._LocalRemesh(self, "LocalRemesh", service, rules, path)
+                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
+                    self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.ShowPrism2DPreferences = self._ShowPrism2DPreferences(self, "ShowPrism2DPreferences", service, rules, path)
-                    self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
-                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
                     self.nOrthogonalLayers = self._nOrthogonalLayers(self, "nOrthogonalLayers", service, rules, path)
 
                 class _SplitQuads(PyTextualCommandArgumentsSubItem):
@@ -8424,24 +8424,24 @@ class Root(PyMenu):
                     Argument LocalRemesh.
                     """
 
-                class _GapFactor(PyNumericalCommandArgumentsSubItem):
+                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument GapFactor.
+                    Argument MaxFaceSkew.
                     """
 
-                class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
+                class _RefineStretchedQuads(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowPrism2DPreferences.
+                    Argument RefineStretchedQuads.
                     """
 
-                class _RefineStretchedQuads(PyTextualCommandArgumentsSubItem):
+                class _GapFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument RefineStretchedQuads.
+                    Argument GapFactor.
                     """
 
-                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
+                class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument MaxFaceSkew.
+                    Argument ShowPrism2DPreferences.
                     """
 
                 class _nOrthogonalLayers(PyNumericalCommandArgumentsSubItem):
@@ -8456,18 +8456,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MergeEdgeZonesBasedOnLabels = self._MergeEdgeZonesBasedOnLabels(self, "MergeEdgeZonesBasedOnLabels", service, rules, path)
                     self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
+                    self.MergeEdgeZonesBasedOnLabels = self._MergeEdgeZonesBasedOnLabels(self, "MergeEdgeZonesBasedOnLabels", service, rules, path)
                     self.ShowAdvancedOptions = self._ShowAdvancedOptions(self, "ShowAdvancedOptions", service, rules, path)
 
-                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeEdgeZonesBasedOnLabels.
+                    Argument MergeFaceZonesBasedOnLabels.
                     """
 
-                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeFaceZonesBasedOnLabels.
+                    Argument MergeEdgeZonesBasedOnLabels.
                     """
 
                 class _ShowAdvancedOptions(PyParameterCommandArgumentsSubItem):
@@ -8780,8 +8780,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -8811,14 +8811,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -9308,12 +9308,12 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
                     self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
-                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
-                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
@@ -9334,9 +9334,9 @@ class Root(PyMenu):
                     Argument AutoMerge.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
+                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
                     """
 
                 class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
@@ -9344,14 +9344,14 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to the task.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
+                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
                     """
 
-                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
+                    Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -9359,9 +9359,9 @@ class Root(PyMenu):
                     If your geometry contains small edges, you can choose to extract these edge features when generating the surface mesh by selecting yes. Note that selecting yes , will always extract small edge features regardless of your selection for the Auto Remesh to Remove Clustering? option.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
+                    Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -9461,18 +9461,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.RefineFaceting = self._RefineFaceting(self, "RefineFaceting", service, rules, path)
+                    self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.Tolerance = self._Tolerance(self, "Tolerance", service, rules, path)
 
-                class _MaxSize(PyNumericalCommandArgumentsSubItem):
+                class _RefineFaceting(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Argument RefineFaceting.
                     """
 
-                class _RefineFaceting(PyParameterCommandArgumentsSubItem):
+                class _MaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument RefineFaceting.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
                 class _Tolerance(PyNumericalCommandArgumentsSubItem):
@@ -10114,14 +10114,14 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
                     self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
                     self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
                     self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
-                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
+                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
                     self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
                     self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
-                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
+                    self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
                     self.AddMultipleQualityMethods = self._AddMultipleQualityMethods(self, "AddMultipleQualityMethods", service, rules, path)
                     self.MaxCellSizeChange = self._MaxCellSizeChange(self, "MaxCellSizeChange", service, rules, path)
                     self.WritePrismControlFile = self._WritePrismControlFile(self, "WritePrismControlFile", service, rules, path)
@@ -10129,14 +10129,14 @@ class Root(PyMenu):
                     self.CheckSelfProximity = self._CheckSelfProximity(self, "CheckSelfProximity", service, rules, path)
                     self.Avoid1_8Transition = self._Avoid1_8Transition(self, "Avoid1_8Transition", service, rules, path)
                     self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
-                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
+                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.SolidGrowthRate = self._SolidGrowthRate(self, "SolidGrowthRate", service, rules, path)
-                    self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
+                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
                     self.QualityWarningLimit = self._QualityWarningLimit(self, "QualityWarningLimit", service, rules, path)
 
-                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
+                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
                     """
 
                 class _QualityMethod(PyTextualCommandArgumentsSubItem):
@@ -10154,9 +10154,9 @@ class Root(PyMenu):
                     Specify the angle to preserve features when using a polyhedral-based mesh.
                     """
 
-                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
+                class _UseSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
+                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
                     """
 
                 class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
@@ -10169,9 +10169,9 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to the task.
                     """
 
-                class _TetInSolids(PyTextualCommandArgumentsSubItem):
+                class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument TetInSolids.
+                    Argument MinEdgeLength.
                     """
 
                 class _AddMultipleQualityMethods(PyTextualCommandArgumentsSubItem):
@@ -10209,9 +10209,9 @@ class Root(PyMenu):
                     Argument MinFaceArea.
                     """
 
-                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
+                class _TetInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
+                    Argument TetInSolids.
                     """
 
                 class _SolidGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -10219,9 +10219,9 @@ class Root(PyMenu):
                     Specify the rate of growth for a tetrahedron or polyhedron mesh.
                     """
 
-                class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
+                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MinEdgeLength.
+                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
                     """
 
                 class _QualityWarningLimit(PyNumericalCommandArgumentsSubItem):
@@ -10245,8 +10245,8 @@ class Root(PyMenu):
                     self.MergeBoundaryLayers = self._MergeBoundaryLayers(self, "MergeBoundaryLayers", service, rules, path)
                     self.ShowPrismPreferences = self._ShowPrismPreferences(self, "ShowPrismPreferences", service, rules, path)
                     self.NormalSmoothRelaxationFactor = self._NormalSmoothRelaxationFactor(self, "NormalSmoothRelaxationFactor", service, rules, path)
-                    self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismMinAspectRatio = self._PrismMinAspectRatio(self, "PrismMinAspectRatio", service, rules, path)
+                    self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismAdjacentAngle = self._PrismAdjacentAngle(self, "PrismAdjacentAngle", service, rules, path)
 
                 class _PrismKeepFirstLayer(PyTextualCommandArgumentsSubItem):
@@ -10294,14 +10294,14 @@ class Root(PyMenu):
                     Specify the smoothness factor for normal prism layers. Increasing this value will generate more prism layers especially near sharp corners.
                     """
 
-                class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
+                class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    This option can be used when generating a tetrahedral mesh with prism cells and is set to No by default. Selecting Yes for this option will enable stair-stepping for exposed quadrilateral faces (exposed quads) on prism cells. Stair-stepping will prevent pyramids from being created on these exposed quads, which generally would lead to poor quality in the exposed quad location.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
-                class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    This option can be used when generating a tetrahedral mesh with prism cells and is set to No by default. Selecting Yes for this option will enable stair-stepping for exposed quadrilateral faces (exposed quads) on prism cells. Stair-stepping will prevent pyramids from being created on these exposed quads, which generally would lead to poor quality in the exposed quad location.
                     """
 
                 class _PrismAdjacentAngle(PyNumericalCommandArgumentsSubItem):
@@ -10316,19 +10316,19 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.ShowGlobalThinVolumePreferences = self._ShowGlobalThinVolumePreferences(self, "ShowGlobalThinVolumePreferences", service, rules, path)
+                    self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
                     self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
 
-                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    Display global settings for thin volume meshing.
                     """
 
-                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
+                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display global settings for thin volume meshing.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
                 class _StairStep(PyTextualCommandArgumentsSubItem):
@@ -10488,8 +10488,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -10519,14 +10519,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -10743,10 +10743,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -10773,9 +10773,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -10788,9 +10788,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
         def create_instance(self) -> _GeometrySetupCommandArguments:
@@ -11005,9 +11005,9 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
@@ -11047,9 +11047,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -11057,9 +11057,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -11115,7 +11115,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -11126,16 +11126,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the construction surface as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -11188,9 +11188,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
         def create_instance(self) -> _IdentifyConstructionSurfacesCommandArguments:
@@ -11621,11 +11621,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
                     self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11657,19 +11657,19 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportNamedSelections.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11677,9 +11677,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument ExtractFeatures.
                     """
 
         def create_instance(self) -> _ImportBodyOfInfluenceGeometryCommandArguments:
@@ -11769,21 +11769,21 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
+                    self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
                     self.FacetedBodies = self._FacetedBodies(self, "FacetedBodies", service, rules, path)
                     self.CISeparation = self._CISeparation(self, "CISeparation", service, rules, path)
-                    self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
+                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
                     self.CIRefaceting = self._CIRefaceting(self, "CIRefaceting", service, rules, path)
                     self.AutomaticObjectCreation = self._AutomaticObjectCreation(self, "AutomaticObjectCreation", service, rules, path)
                     self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
                     self.MaxFacetLength = self._MaxFacetLength(self, "MaxFacetLength", service, rules, path)
-                    self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
+                    self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
                     self.CISeparationAngle = self._CISeparationAngle(self, "CISeparationAngle", service, rules, path)
                     self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
 
-                class _CITolerence(PyNumericalCommandArgumentsSubItem):
+                class _MergeNodes(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
+                    Argument MergeNodes.
                     """
 
                 class _FacetedBodies(PyTextualCommandArgumentsSubItem):
@@ -11796,9 +11796,9 @@ class Root(PyMenu):
                     Choose whether or not you are going to separate zones upon import based on a region, a region and a specified separation angle, a face, or neither. This is required to select faces for local sizing. If Named Selections have already been defined at these locations, then separation is not needed.
                     """
 
-                class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
+                class _CITolerence(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ExtractAngle.
+                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
                     """
 
                 class _CIRefaceting(PyParameterCommandArgumentsSubItem):
@@ -11821,9 +11821,9 @@ class Root(PyMenu):
                     Enables you to specify a maximum facet size for the imported model to avoid very large facets during the file import. Depending on the CAD geometry, this may yield more accuracy.
                     """
 
-                class _MergeNodes(PyTextualCommandArgumentsSubItem):
+                class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MergeNodes.
+                    Argument ExtractAngle.
                     """
 
                 class _CISeparationAngle(PyNumericalCommandArgumentsSubItem):
@@ -11885,8 +11885,8 @@ class Root(PyMenu):
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
                     self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
 
@@ -11925,14 +11925,14 @@ class Root(PyMenu):
                     Argument UsePartOrBodyAsSuffix.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportNamedSelections.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -12535,11 +12535,11 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
-                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
-                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -12588,6 +12588,11 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
+                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
+                    """
+                    Enable this field to display the initial size control in the graphics window.
+                    """
+
                 class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
                     Choose the type of sizing control (curvature, proximity, soft, or boi).
@@ -12598,9 +12603,9 @@ class Root(PyMenu):
                     Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
-                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
+                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
-                    Enable this field to display the initial size control in the graphics window.
+                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
                 class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
@@ -12608,11 +12613,6 @@ class Root(PyMenu):
                     Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
                     """
 
-                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
-                    """
-
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
                     """
                     Enable this field to display the target size control in the graphics window.
@@ -12994,8 +12994,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -13025,14 +13025,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -13314,10 +13314,10 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
+                    self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
 
                 class _FacetMaxEdgeLength(PyTextualCommandArgumentsSubItem):
                     """
@@ -13329,9 +13329,9 @@ class Root(PyMenu):
                     Specify a maximum element size for the imported model to avoid very large facets during the file import.
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
                 class _Deviation(PyNumericalCommandArgumentsSubItem):
@@ -13344,9 +13344,9 @@ class Root(PyMenu):
                     Select this option when you want to change faceting of the selected object. Refaceting will refacet the original CAD geometry. Only the faceted CAD geometry is used during the meshing process. The refaceting settings control how far the facet edges are from the model and the size of the facets.  More...
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
                     """
 
             class _IgnoreSolidNames(PyParameterCommandArgumentsSubItem):
@@ -13409,8 +13409,8 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.RefacetDuringLoad = self._RefacetDuringLoad(self, "RefacetDuringLoad", service, rules, path)
-                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
+                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
 
                 class _MaxSize(PyNumericalCommandArgumentsSubItem):
                     """
@@ -13422,14 +13422,14 @@ class Root(PyMenu):
                     This option is available when DSCO is selected for the Import Route. When enabled, this option will refacet the geometry as it is converted to a .fmd file. This option eliminates the need for any refaceting operation after the geometry is loaded, which can be expensive.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
                     """
 
         def create_instance(self) -> _PartManagementCommandArguments:
@@ -14025,9 +14025,9 @@ class Root(PyMenu):
                     self.Operation = self._Operation(self, "Operation", service, rules, path)
                     self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                     self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                    self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
-                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                     self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
+                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                    self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -14081,9 +14081,9 @@ class Root(PyMenu):
                     Specify the increment by which the tolerance changes for each attempt to join face pairs.
                     """
 
-                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
                 class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -14091,9 +14091,9 @@ class Root(PyMenu):
                     Argument PerLabelList.
                     """
 
-                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14118,10 +14118,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -14148,9 +14148,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14163,9 +14163,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
             class _SurfaceMeshPreferences(PySingletonCommandArgumentsSubItem):
@@ -14178,19 +14178,19 @@ class Root(PyMenu):
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
                     self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
+                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
-                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -14208,19 +14208,19 @@ class Root(PyMenu):
                     Argument SMQualityImprove.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ShowSurfaceMeshPreferences.
+                    Argument SMSeparationAngle.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SMSeparation.
+                    Argument AutoMerge.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Argument ShowSurfaceMeshPreferences.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -14228,9 +14228,9 @@ class Root(PyMenu):
                     Argument TVMAutoControlCreation.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMSeparationAngle.
+                    Argument SMSeparation.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -14243,9 +14243,9 @@ class Root(PyMenu):
                     Argument SMStepWidth.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SMQualityMaxAngle.
+                    Argument VolumeMeshMaxSize.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -14253,14 +14253,14 @@ class Root(PyMenu):
                     Argument AutoAssignZoneTypes.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument VolumeMeshMaxSize.
+                    Argument SMQualityMaxAngle.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SelfIntersectCheck.
+                    Argument SMQualityImproveLimit.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -14268,9 +14268,9 @@ class Root(PyMenu):
                     Argument AutoSurfaceRemesh.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImproveLimit.
+                    Argument SelfIntersectCheck.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -14360,10 +14360,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.NewLabelObjects = self._NewLabelObjects(self, "NewLabelObjects", service, rules, path)
-                    self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
+                    self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
                     self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
+                    self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
                     self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
-                    self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
                     self.NewLabelMax = self._NewLabelMax(self, "NewLabelMax", service, rules, path)
                     self.NewZoneType = self._NewZoneType(self, "NewZoneType", service, rules, path)
                     self.NewLabelCurvature = self._NewLabelCurvature(self, "NewLabelCurvature", service, rules, path)
@@ -14374,9 +14374,9 @@ class Root(PyMenu):
                     Argument NewLabelObjects.
                     """
 
-                class _NewLabels(PyTextualCommandArgumentsSubItem):
+                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabels.
+                    Argument NewLabelCells.
                     """
 
                 class _NewLabelType(PyTextualCommandArgumentsSubItem):
@@ -14384,14 +14384,14 @@ class Root(PyMenu):
                     Argument NewLabelType.
                     """
 
-                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
+                class _NewLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelResolution.
+                    Argument NewLabels.
                     """
 
-                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
+                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelCells.
+                    Argument NewLabelResolution.
                     """
 
                 class _NewLabelMax(PyTextualCommandArgumentsSubItem):