ansys-fluent-core 0.32.2__py3-none-any.whl → 0.33.0__py3-none-any.whl

ansys/fluent/core/generated/datamodel_252/meshing.py

@@ -1302,10 +1302,10 @@ class Root(PyMenu):
                         self.ConnectLabelWildcard = self._ConnectLabelWildcard(self, "ConnectLabelWildcard", service, rules, path)
                         self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
                         self.RelativeShareTopologyTolerance = self._RelativeShareTopologyTolerance(self, "RelativeShareTopologyTolerance", service, rules, path)
-                        self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
+                        self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                         self.ExecuteJoinIntersect = self._ExecuteJoinIntersect(self, "ExecuteJoinIntersect", service, rules, path)
                         self.Operation = self._Operation(self, "Operation", service, rules, path)
-                        self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
+                        self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                         self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
                         self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
                         self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
@@ -1338,9 +1338,9 @@ class Root(PyMenu):
                         Specify the relative tolerance for joining or intersecting face pairs, or the relative tolerance for connecting edge and face pairs.
                         """
 
-                    class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
+                    class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
                         """
-                        Argument FluidLabelWildcard.
+                        Specify the threshold angle for joining face pairs.
                         """
 
                     class _ExecuteJoinIntersect(PyTextualCommandArgumentsSubItem):
@@ -1353,9 +1353,9 @@ class Root(PyMenu):
                         Choose whether to apply share topology using the Join-Intersect method where you join and/or intersect the problematic faces, or using the Interface Connect method where you connect edges of overlapping face pairs. Note that imprinting of overlapping faces in SCDM/Discovery is highly recommended for the Interface Connect method.
                         """
 
-                    class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
+                    class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
                         """
-                        Specify the threshold angle for joining face pairs.
+                        Argument FluidLabelWildcard.
                         """
 
                     class _STToleranceIncrement(PyNumericalCommandArgumentsSubItem):
@@ -1526,8 +1526,8 @@ class Root(PyMenu):
                     self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
@@ -1551,14 +1551,14 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument LastRatioNumLayers.
                     """
 
                 class _GapFactor(PyNumericalCommandArgumentsSubItem):
@@ -1769,11 +1769,11 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
+                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
@@ -1804,14 +1804,14 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
+                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
+                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
-                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
                 class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
@@ -1819,14 +1819,14 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Display advanced options that you may want to apply to this task.
                     """
 
-                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to this task.
+                    Argument LastRatioNumLayers.
                     """
 
                 class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
@@ -2090,12 +2090,12 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
+                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
+                    self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -2125,24 +2125,19 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
-                    """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
-                    """
-
                 class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
                     Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
-                class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument InvalidNormalMethod.
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
-                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
+                class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to this task.
+                    Argument InvalidNormalMethod.
                     """
 
                 class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
@@ -2155,6 +2150,11 @@ class Root(PyMenu):
                     Argument LastRatioNumLayers.
                     """
 
+                class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
+                    """
+                    Display advanced options that you may want to apply to this task.
+                    """
+
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
                     """
                     Controls the tangency of the invalid normal faces. An invalid normal location with all 90 degree angles has a tangency of 1. So, faces are still treated as an invalid normal even if the angle deviates slightly from 90 degrees (resulting in a tangency of 0.98).
@@ -2395,11 +2395,11 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
-                    self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
-                    self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
+                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
+                    self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -2448,9 +2448,9 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Enable this field to display the initial size control in the graphics window.
                     """
 
                 class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -2458,19 +2458,19 @@ class Root(PyMenu):
                     Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
-                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
+                class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
-                    Enable this field to display the initial size control in the graphics window.
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
                     """
 
-                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
+                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
                     """
 
-                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
+                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
@@ -2999,8 +2999,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -3030,14 +3030,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -3249,23 +3249,23 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
+                    self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
-                class _ExposeSide(PyTextualCommandArgumentsSubItem):
+                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExposeSide.
+                    Argument ShowShellBLAdvancedOptions.
                     """
 
-                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _ExposeSide(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowShellBLAdvancedOptions.
+                    Argument ExposeSide.
                     """
 
                 class _MaxAspectRatio(PyNumericalCommandArgumentsSubItem):
@@ -3278,14 +3278,14 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument LastRatioNumLayers.
                     """
 
                 class _GapFactor(PyNumericalCommandArgumentsSubItem):
@@ -4162,7 +4162,7 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.WrapTargetRatio = self._WrapTargetRatio(self, "WrapTargetRatio", service, rules, path)
+                    self.TargeSizeFieldFileName = self._TargeSizeFieldFileName(self, "TargeSizeFieldFileName", service, rules, path)
                     self.WrapTargetSizeFieldRatio = self._WrapTargetSizeFieldRatio(self, "WrapTargetSizeFieldRatio", service, rules, path)
                     self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
                     self.SolidFluidRaio = self._SolidFluidRaio(self, "SolidFluidRaio", service, rules, path)
@@ -4173,12 +4173,12 @@ class Root(PyMenu):
                     self.TargetSizeFieldFileName = self._TargetSizeFieldFileName(self, "TargetSizeFieldFileName", service, rules, path)
                     self.SolidFluidRatio = self._SolidFluidRatio(self, "SolidFluidRatio", service, rules, path)
                     self.WrapSizeFieldFileName = self._WrapSizeFieldFileName(self, "WrapSizeFieldFileName", service, rules, path)
-                    self.TargeSizeFieldFileName = self._TargeSizeFieldFileName(self, "TargeSizeFieldFileName", service, rules, path)
+                    self.WrapTargetRatio = self._WrapTargetRatio(self, "WrapTargetRatio", service, rules, path)
                     self.WrapTargetRaio = self._WrapTargetRaio(self, "WrapTargetRaio", service, rules, path)
 
-                class _WrapTargetRatio(PyNumericalCommandArgumentsSubItem):
+                class _TargeSizeFieldFileName(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument WrapTargetRatio.
+                    Indicate the name and location of the target size field file (\\*.sf).
                     """
 
                 class _WrapTargetSizeFieldRatio(PyNumericalCommandArgumentsSubItem):
@@ -4231,9 +4231,9 @@ class Root(PyMenu):
                     Indicate the name and location of the wrap size field file (\\*.sf).
                     """
 
-                class _TargeSizeFieldFileName(PyTextualCommandArgumentsSubItem):
+                class _WrapTargetRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Indicate the name and location of the target size field file (\\*.sf).
+                    Argument WrapTargetRatio.
                     """
 
                 class _WrapTargetRaio(PyNumericalCommandArgumentsSubItem):
@@ -4598,18 +4598,18 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -4639,24 +4639,24 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument NumberOfLayers.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument Rate.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument WakeGrowthFactor.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -4674,14 +4674,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument Rate.
-                    """
-
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument AspectRatio.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -4689,9 +4684,9 @@ class Root(PyMenu):
                     Argument X.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Argument LastRatioPercentage.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -4699,6 +4694,11 @@ class Root(PyMenu):
                     Argument OffsetMethodType.
                     """
 
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                    """
+                    Argument FlipDirection.
+                    """
+
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument FirstHeight.
@@ -4732,9 +4732,9 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
@@ -4774,9 +4774,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -4784,9 +4784,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -4876,15 +4876,15 @@ class Root(PyMenu):
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
+                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -4907,9 +4907,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -4917,9 +4917,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -4942,14 +4942,14 @@ class Root(PyMenu):
                     Argument BoxCenterX.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderRadius2.
+                    Argument BoxCenterZ.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxCenterZ.
+                    Argument CylinderRadius2.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -5095,7 +5095,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -5106,16 +5106,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Argument SizeRelativeLength.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the x-coordinate of the offset collar mesh.
+                    Argument XmaxRatio.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -5168,9 +5168,9 @@ class Root(PyMenu):
                     Argument ZmaxRatio.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument XmaxRatio.
+                    Specify the x-coordinate of the offset collar mesh.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -5185,18 +5185,18 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
-                    self.X = self._X(self, "X", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.X = self._X(self, "X", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5226,24 +5226,24 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument AspectRatio.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument NumberOfLayers.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5261,14 +5261,9 @@ class Root(PyMenu):
                     Choose a single edge zone from the list below for your edge-based collar mesh. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument WakeGrowthFactor.
-                    """
-
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the x-coordinate of the offset collar mesh.
+                    Argument Rate.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -5276,9 +5271,9 @@ class Root(PyMenu):
                     Argument LastRatioPercentage.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Specify the x-coordinate of the offset collar mesh.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -5286,6 +5281,11 @@ class Root(PyMenu):
                     Argument OffsetMethodType.
                     """
 
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                    """
+                    Argument FlipDirection.
+                    """
+
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument FirstHeight.
@@ -5313,8 +5313,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
                     self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
+                    self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
@@ -5326,19 +5326,19 @@ class Root(PyMenu):
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -5396,14 +5396,14 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Y-Offset.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument X2.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -5463,9 +5463,9 @@ class Root(PyMenu):
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
@@ -5494,9 +5494,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -5504,9 +5504,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -5773,18 +5773,18 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5814,24 +5814,24 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the ratio of the prism base length to the prism layer height.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select the number of boundary layers to be generated.
+                    Specify the rate of growth of the boundary layer.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Specify the ratio of the prism base length to the prism layer height.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5849,9 +5849,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the rate of growth of the boundary layer.
+                    Select the number of boundary layers to be generated.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -5864,14 +5864,14 @@ class Root(PyMenu):
                     Specify the offset height of the last layer as a percentage of the local base mesh size.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Choose the method that will be used to create the boundary layer, or prism, controls.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose the method that will be used to create the boundary layer, or prism, controls.
+                    Argument FlipDirection.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -5913,9 +5913,9 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5979,6 +5979,11 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
+                class _X2(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument X2.
+                    """
+
                 class _Node2(PyTextualCommandArgumentsSubItem):
                     """
                     Argument Node2.
@@ -5989,11 +5994,6 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument X2.
-                    """
-
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -6051,9 +6051,9 @@ class Root(PyMenu):
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
@@ -6082,9 +6082,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -6092,9 +6092,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -6370,7 +6370,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6381,16 +6381,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6443,9 +6443,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
         def create_instance(self) -> _CreateExternalFlowBoundariesCommandArguments:
@@ -6981,16 +6981,16 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.X = self._X(self, "X", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.X = self._X(self, "X", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
@@ -7022,24 +7022,24 @@ class Root(PyMenu):
                     Specify a value that is used to obtain a rough shape of the selected object(s). The larger the value, the more approximate the shape.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Specify the number of boundary layers that are to be captured in the refinement region.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Argument NumberOfLayers.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of boundary layers that are to be captured in the refinement region.
+                    Specify the factor by which the refinement region expands in the wake of the flow direction.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the factor by which the refinement region expands in the wake of the flow direction.
+                    Argument Rate.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -7057,19 +7057,19 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument AspectRatio.
                     """
 
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
                 class _FlipDirection(PyParameterCommandArgumentsSubItem):
@@ -7121,9 +7121,9 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -7187,6 +7187,11 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
+                    """
+
                 class _X2(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the X-coordinate of the second position of the cylinder.
@@ -7197,11 +7202,6 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
-                    """
-
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -7259,15 +7259,15 @@ class Root(PyMenu):
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
+                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -7290,9 +7290,9 @@ class Root(PyMenu):
                     Specify the X-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -7300,9 +7300,9 @@ class Root(PyMenu):
                     Specify the Y-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -7325,14 +7325,14 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
+                    Specify the radius of the cylinder at the second position.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the radius of the cylinder at the second position.
+                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -7541,8 +7541,8 @@ class Root(PyMenu):
                     self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
                     self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
-                    self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
+                    self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
                     self.BufferSize = self._BufferSize(self, "BufferSize", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.NonRectangularBufferSize = self._NonRectangularBufferSize(self, "NonRectangularBufferSize", service, rules, path)
@@ -7573,14 +7573,14 @@ class Root(PyMenu):
                     Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _MeshSize(PyNumericalCommandArgumentsSubItem):
+                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the cell size for the porous region mesh.
+                    Specify the angle at which features will be extracted for the porous region.
                     """
 
-                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _MeshSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the angle at which features will be extracted for the porous region.
+                    Specify the cell size for the porous region mesh.
                     """
 
                 class _BufferSize(PyNumericalCommandArgumentsSubItem):
@@ -7911,10 +7911,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.PorousRegions = self._PorousRegions(self, "PorousRegions", service, rules, path)
-                    self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
+                    self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
                     self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
+                    self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
                     self.ExtractEdgeFeatures = self._ExtractEdgeFeatures(self, "ExtractEdgeFeatures", service, rules, path)
                     self.MovingObjects = self._MovingObjects(self, "MovingObjects", service, rules, path)
                     self.EnablePrimeWrapper = self._EnablePrimeWrapper(self, "EnablePrimeWrapper", service, rules, path)
@@ -7926,9 +7926,9 @@ class Root(PyMenu):
                     Specify whether or not you will have any porous regions in your geometry. If so, then a Create Porous Regions task will be added to the workflow. A simple primitive rectangle will be placed over complex and detailed geometry of a porous region (for example, fins and tubes of a heat exchanger).  With buffer layer:
                     """
 
-                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
+                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument CloseLeakages.
+                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
                     """
 
                 class _CloseLeakges(PyTextualCommandArgumentsSubItem):
@@ -7936,14 +7936,14 @@ class Root(PyMenu):
                     Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the workflow.
+                    Argument CloseLeakages.
                     """
 
-                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
+                    Display advanced options that you may want to apply to the workflow.
                     """
 
                 class _ExtractEdgeFeatures(PyTextualCommandArgumentsSubItem):
@@ -8287,16 +8287,16 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MaxLayerHeight = self._MaxLayerHeight(self, "MaxLayerHeight", service, rules, path)
-                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
                     self.BiasMethod = self._BiasMethod(self, "BiasMethod", service, rules, path)
-                    self.BiasMethodControl = self._BiasMethodControl(self, "BiasMethodControl", service, rules, path)
+                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
+                    self.MaxLayerHeight = self._MaxLayerHeight(self, "MaxLayerHeight", service, rules, path)
                     self.MergeCellZones = self._MergeCellZones(self, "MergeCellZones", service, rules, path)
+                    self.BiasMethodControl = self._BiasMethodControl(self, "BiasMethodControl", service, rules, path)
                     self.ShowVMExtrudePreferences = self._ShowVMExtrudePreferences(self, "ShowVMExtrudePreferences", service, rules, path)
 
-                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
+                class _BiasMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MaxLayerHeight.
+                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
                     """
 
                 class _MidSpanLength(PyNumericalCommandArgumentsSubItem):
@@ -8304,19 +8304,19 @@ class Root(PyMenu):
                     Argument MidSpanLength.
                     """
 
-                class _BiasMethod(PyTextualCommandArgumentsSubItem):
+                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
+                    Argument MaxLayerHeight.
                     """
 
-                class _BiasMethodControl(PyTextualCommandArgumentsSubItem):
+                class _MergeCellZones(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument BiasMethodControl.
+                    Indicate whether or not you want to merge the extruded layers with any adjacent regions.
                     """
 
-                class _MergeCellZones(PyParameterCommandArgumentsSubItem):
+                class _BiasMethodControl(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate whether or not you want to merge the extruded layers with any adjacent regions.
+                    Argument BiasMethodControl.
                     """
 
                 class _ShowVMExtrudePreferences(PyParameterCommandArgumentsSubItem):
@@ -8393,10 +8393,10 @@ class Root(PyMenu):
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.RemeshGrowthRate = self._RemeshGrowthRate(self, "RemeshGrowthRate", service, rules, path)
                     self.LocalRemesh = self._LocalRemesh(self, "LocalRemesh", service, rules, path)
-                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
-                    self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.ShowPrism2DPreferences = self._ShowPrism2DPreferences(self, "ShowPrism2DPreferences", service, rules, path)
+                    self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
+                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
                     self.nOrthogonalLayers = self._nOrthogonalLayers(self, "nOrthogonalLayers", service, rules, path)
 
                 class _SplitQuads(PyTextualCommandArgumentsSubItem):
@@ -8424,24 +8424,24 @@ class Root(PyMenu):
                     Argument LocalRemesh.
                     """
 
-                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
+                class _GapFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MaxFaceSkew.
+                    Argument GapFactor.
                     """
 
-                class _RefineStretchedQuads(PyTextualCommandArgumentsSubItem):
+                class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument RefineStretchedQuads.
+                    Argument ShowPrism2DPreferences.
                     """
 
-                class _GapFactor(PyNumericalCommandArgumentsSubItem):
+                class _RefineStretchedQuads(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument GapFactor.
+                    Argument RefineStretchedQuads.
                     """
 
-                class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
+                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ShowPrism2DPreferences.
+                    Argument MaxFaceSkew.
                     """
 
                 class _nOrthogonalLayers(PyNumericalCommandArgumentsSubItem):
@@ -8456,18 +8456,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.MergeEdgeZonesBasedOnLabels = self._MergeEdgeZonesBasedOnLabels(self, "MergeEdgeZonesBasedOnLabels", service, rules, path)
+                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.ShowAdvancedOptions = self._ShowAdvancedOptions(self, "ShowAdvancedOptions", service, rules, path)
 
-                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeFaceZonesBasedOnLabels.
+                    Argument MergeEdgeZonesBasedOnLabels.
                     """
 
-                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeEdgeZonesBasedOnLabels.
+                    Argument MergeFaceZonesBasedOnLabels.
                     """
 
                 class _ShowAdvancedOptions(PyParameterCommandArgumentsSubItem):
@@ -9168,8 +9168,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -9199,14 +9199,14 @@ class Root(PyMenu):
                     Set proximity based refinement. Edges considers edge-to-edge proximity, while Faces considers face-to-face proximity, and Faces and Edges considers both.  More...
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Enable this option to visualize the size field in the graphics window.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.  More...
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.  More...
+                    Enable this option to visualize the size field in the graphics window.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -9307,21 +9307,21 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
-                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
+                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
                     self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
-                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -9329,9 +9329,9 @@ class Root(PyMenu):
                     Specify the limiting skewness value for cell collapse to improve the mesh. If any remaining triangles are above this limit, these triangles will be aggressively removed using a fixed maximum angle of 120 degrees.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
                     """
 
                 class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
@@ -9344,9 +9344,9 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to the task.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
+                    Argument AutoMerge.
                     """
 
                 class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
@@ -9359,9 +9359,9 @@ class Root(PyMenu):
                     If your geometry contains small edges, you can choose to extract these edge features when generating the surface mesh by selecting yes. Note that selecting yes , will always extract small edge features regardless of your selection for the Auto Remesh to Remove Clustering? option.
                     """
 
-                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
+                    Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -9374,9 +9374,9 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -9384,14 +9384,14 @@ class Root(PyMenu):
                     Choose whether or not to automatically assign boundary types to zones.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify a limiting value for skewness to improve the quality of the surface mesh. Quality improvement is attempted on those triangles where the skewness is above this limit.
+                    Choose whether or not to check for self-intersecting faces. Performance may be improved if this is disabled.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -9399,9 +9399,9 @@ class Root(PyMenu):
                     Choose whether or not to automatically remesh in order to remove excessive clustering of nodes. By default (auto), this is done if local sizing has been assigned or Share Topology is invoked, but skipped if not. Performance may be improved if this is disabled. In addition, you can choose to use the much faster refaceting technique as an alternative to automatic remeshing. When importing the mesh, remeshing is only performed if this option is set to yes and then all faces are remeshed; and the refaceting option is not available because the initial mesh cannot be refaceted.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose whether or not to check for self-intersecting faces. Performance may be improved if this is disabled.
+                    Specify a limiting value for skewness to improve the quality of the surface mesh. Quality improvement is attempted on those triangles where the skewness is above this limit.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -9461,18 +9461,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.RefineFaceting = self._RefineFaceting(self, "RefineFaceting", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
+                    self.RefineFaceting = self._RefineFaceting(self, "RefineFaceting", service, rules, path)
                     self.Tolerance = self._Tolerance(self, "Tolerance", service, rules, path)
 
-                class _RefineFaceting(PyParameterCommandArgumentsSubItem):
+                class _MaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument RefineFaceting.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
-                class _MaxSize(PyNumericalCommandArgumentsSubItem):
+                class _RefineFaceting(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Argument RefineFaceting.
                     """
 
                 class _Tolerance(PyNumericalCommandArgumentsSubItem):
@@ -9494,10 +9494,10 @@ class Root(PyMenu):
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
-                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
+                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -9534,14 +9534,14 @@ class Root(PyMenu):
                     Argument ImportCurvatureDataFromCAD.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -9549,9 +9549,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportNamedSelections.
                     """
 
             class _ShareTopologyPreferences(PySingletonCommandArgumentsSubItem):
@@ -10114,13 +10114,13 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
-                    self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
-                    self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
-                    self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
                     self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
+                    self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
+                    self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
                     self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
-                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
+                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
+                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
                     self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
                     self.AddMultipleQualityMethods = self._AddMultipleQualityMethods(self, "AddMultipleQualityMethods", service, rules, path)
                     self.MaxCellSizeChange = self._MaxCellSizeChange(self, "MaxCellSizeChange", service, rules, path)
@@ -10128,20 +10128,20 @@ class Root(PyMenu):
                     self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
                     self.CheckSelfProximity = self._CheckSelfProximity(self, "CheckSelfProximity", service, rules, path)
                     self.Avoid1_8Transition = self._Avoid1_8Transition(self, "Avoid1_8Transition", service, rules, path)
+                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
                     self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
-                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.SolidGrowthRate = self._SolidGrowthRate(self, "SolidGrowthRate", service, rules, path)
-                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
+                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.QualityWarningLimit = self._QualityWarningLimit(self, "QualityWarningLimit", service, rules, path)
 
-                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
+                class _UseSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
+                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
                     """
 
-                class _QualityMethod(PyTextualCommandArgumentsSubItem):
+                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
+                    Specify the angle to preserve features when using a polyhedral-based mesh.
                     """
 
                 class _MinPolySize(PyNumericalCommandArgumentsSubItem):
@@ -10149,24 +10149,24 @@ class Root(PyMenu):
                     Argument MinPolySize.
                     """
 
-                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _QualityMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the angle to preserve features when using a polyhedral-based mesh.
+                    Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
                     """
 
-                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
+                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
                     """
 
-                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
+                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
+                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
                     """
 
-                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
                     """
 
                 class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
@@ -10204,14 +10204,14 @@ class Root(PyMenu):
                     Indicate whether or not you want to avoid any potential 1:8 cell transition in the hexcore region of the volume mesh, replacing any abrupt change in the cell size with polyhedral cells to improve solver performance in such transitional areas.
                     """
 
-                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
+                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument MinFaceArea.
+                    Display advanced options that you may want to apply to the task.
                     """
 
-                class _TetInSolids(PyTextualCommandArgumentsSubItem):
+                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument TetInSolids.
+                    Argument MinFaceArea.
                     """
 
                 class _SolidGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -10219,9 +10219,9 @@ class Root(PyMenu):
                     Specify the rate of growth for a tetrahedron or polyhedron mesh.
                     """
 
-                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
+                class _TetInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
+                    Argument TetInSolids.
                     """
 
                 class _QualityWarningLimit(PyNumericalCommandArgumentsSubItem):
@@ -10243,8 +10243,8 @@ class Root(PyMenu):
                     self.PrismGapFactor = self._PrismGapFactor(self, "PrismGapFactor", service, rules, path)
                     self.IgnoreInflation = self._IgnoreInflation(self, "IgnoreInflation", service, rules, path)
                     self.MergeBoundaryLayers = self._MergeBoundaryLayers(self, "MergeBoundaryLayers", service, rules, path)
-                    self.ShowPrismPreferences = self._ShowPrismPreferences(self, "ShowPrismPreferences", service, rules, path)
                     self.NormalSmoothRelaxationFactor = self._NormalSmoothRelaxationFactor(self, "NormalSmoothRelaxationFactor", service, rules, path)
+                    self.ShowPrismPreferences = self._ShowPrismPreferences(self, "ShowPrismPreferences", service, rules, path)
                     self.PrismMinAspectRatio = self._PrismMinAspectRatio(self, "PrismMinAspectRatio", service, rules, path)
                     self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismAdjacentAngle = self._PrismAdjacentAngle(self, "PrismAdjacentAngle", service, rules, path)
@@ -10284,14 +10284,14 @@ class Root(PyMenu):
                     Choose whether or not you want to have the boundary layer mesh merged into the bulk mesh.
                     """
 
-                class _ShowPrismPreferences(PyParameterCommandArgumentsSubItem):
+                class _NormalSmoothRelaxationFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display global settings for your boundary layers. Note that these settings are not applied for Multizone boundary layers
+                    Specify the smoothness factor for normal prism layers. Increasing this value will generate more prism layers especially near sharp corners.
                     """
 
-                class _NormalSmoothRelaxationFactor(PyNumericalCommandArgumentsSubItem):
+                class _ShowPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the smoothness factor for normal prism layers. Increasing this value will generate more prism layers especially near sharp corners.
+                    Display global settings for your boundary layers. Note that these settings are not applied for Multizone boundary layers
                     """
 
                 class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
@@ -10316,19 +10316,19 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
+                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
                     self.ShowGlobalThinVolumePreferences = self._ShowGlobalThinVolumePreferences(self, "ShowGlobalThinVolumePreferences", service, rules, path)
-                    self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
-                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
+                    self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
 
-                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
+                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
                     """
-                    Display global settings for thin volume meshing.
+                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
                     """
 
-                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    Display global settings for thin volume meshing.
                     """
 
                 class _StairStep(PyTextualCommandArgumentsSubItem):
@@ -10336,9 +10336,9 @@ class Root(PyMenu):
                     Use this option to invoke stair-stepping at thin volume mesh regions.
                     """
 
-                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
+                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
             class _InvokePrimsControl(PyTextualCommandArgumentsSubItem):
@@ -10488,8 +10488,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
                     self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
+                    self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -10519,14 +10519,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -10999,15 +10999,15 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
@@ -11017,14 +11017,14 @@ class Root(PyMenu):
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -11047,9 +11047,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -11057,9 +11057,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -11115,7 +11115,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -11126,16 +11126,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the construction surface as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -11188,9 +11188,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
         def create_instance(self) -> _IdentifyConstructionSurfacesCommandArguments:
@@ -11769,10 +11769,10 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
+                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
                     self.FacetedBodies = self._FacetedBodies(self, "FacetedBodies", service, rules, path)
                     self.CISeparation = self._CISeparation(self, "CISeparation", service, rules, path)
-                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
+                    self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
                     self.CIRefaceting = self._CIRefaceting(self, "CIRefaceting", service, rules, path)
                     self.AutomaticObjectCreation = self._AutomaticObjectCreation(self, "AutomaticObjectCreation", service, rules, path)
                     self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
@@ -11781,9 +11781,9 @@ class Root(PyMenu):
                     self.CISeparationAngle = self._CISeparationAngle(self, "CISeparationAngle", service, rules, path)
                     self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
 
-                class _MergeNodes(PyTextualCommandArgumentsSubItem):
+                class _CITolerence(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MergeNodes.
+                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
                     """
 
                 class _FacetedBodies(PyTextualCommandArgumentsSubItem):
@@ -11796,9 +11796,9 @@ class Root(PyMenu):
                     Choose whether or not you are going to separate zones upon import based on a region, a region and a specified separation angle, a face, or neither. This is required to select faces for local sizing. If Named Selections have already been defined at these locations, then separation is not needed.
                     """
 
-                class _CITolerence(PyNumericalCommandArgumentsSubItem):
+                class _MergeNodes(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
+                    Argument MergeNodes.
                     """
 
                 class _CIRefaceting(PyParameterCommandArgumentsSubItem):
@@ -11885,10 +11885,10 @@ class Root(PyMenu):
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
-                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11925,14 +11925,14 @@ class Root(PyMenu):
                     Argument UsePartOrBodyAsSuffix.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11940,9 +11940,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument ImportNamedSelections.
                     """
 
         def create_instance(self) -> _ImportGeometryCommandArguments:
@@ -12268,8 +12268,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.FirstNumber = self._FirstNumber(self, "FirstNumber", service, rules, path)
-                    self.NbCellsPerUnit = self._NbCellsPerUnit(self, "NbCellsPerUnit", service, rules, path)
                     self.CustomPatternString = self._CustomPatternString(self, "CustomPatternString", service, rules, path)
+                    self.NbCellsPerUnit = self._NbCellsPerUnit(self, "NbCellsPerUnit", service, rules, path)
                     self.InvokeBatteryModelingOptions = self._InvokeBatteryModelingOptions(self, "InvokeBatteryModelingOptions", service, rules, path)
                     self.UseCustomPattern = self._UseCustomPattern(self, "UseCustomPattern", service, rules, path)
 
@@ -12278,14 +12278,14 @@ class Root(PyMenu):
                     Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.  More...
                     """
 
-                class _NbCellsPerUnit(PyNumericalCommandArgumentsSubItem):
+                class _CustomPatternString(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.   More...
+                    Argument CustomPatternString.
                     """
 
-                class _CustomPatternString(PyTextualCommandArgumentsSubItem):
+                class _NbCellsPerUnit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CustomPatternString.
+                    Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.   More...
                     """
 
                 class _InvokeBatteryModelingOptions(PyTextualCommandArgumentsSubItem):
@@ -12378,8 +12378,8 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.FacetResolution = self._FacetResolution(self, "FacetResolution", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.MaxEdgeLength = self._MaxEdgeLength(self, "MaxEdgeLength", service, rules, path)
                     self.CustomNormalAngle = self._CustomNormalAngle(self, "CustomNormalAngle", service, rules, path)
@@ -12396,14 +12396,14 @@ class Root(PyMenu):
                     Argument FacetResolution.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NormalAngle.
+                    Argument MaxEdgeLengthFactor.
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MaxEdgeLengthFactor.
+                    Argument NormalAngle.
                     """
 
                 class _Deviation(PyNumericalCommandArgumentsSubItem):
@@ -12536,8 +12536,8 @@ class Root(PyMenu):
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
-                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
+                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
                     self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
@@ -12593,14 +12593,14 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
-                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
+                class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the increase in element edge length with each succeeding layer of elements.
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
                     """
 
                 class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
@@ -13315,9 +13315,9 @@ class Root(PyMenu):
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
-                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
-                    self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
+                    self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
 
                 class _FacetMaxEdgeLength(PyTextualCommandArgumentsSubItem):
                     """
@@ -13334,9 +13334,9 @@ class Root(PyMenu):
                     Specify a rotational angle (in degrees) of transformation.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
+                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
                     """
 
                 class _Refacet(PyParameterCommandArgumentsSubItem):
@@ -13344,9 +13344,9 @@ class Root(PyMenu):
                     Select this option when you want to change faceting of the selected object. Refaceting will refacet the original CAD geometry. Only the faceted CAD geometry is used during the meshing process. The refaceting settings control how far the facet edges are from the model and the size of the facets.  More...
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
+                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
                     """
 
             class _IgnoreSolidNames(PyParameterCommandArgumentsSubItem):
@@ -13409,8 +13409,8 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.RefacetDuringLoad = self._RefacetDuringLoad(self, "RefacetDuringLoad", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
 
                 class _MaxSize(PyNumericalCommandArgumentsSubItem):
                     """
@@ -13422,14 +13422,14 @@ class Root(PyMenu):
                     This option is available when DSCO is selected for the Import Route. When enabled, this option will refacet the geometry as it is converted to a .fmd file. This option eliminates the need for any refaceting operation after the geometry is loaded, which can be expensive.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
         def create_instance(self) -> _PartManagementCommandArguments:
@@ -14118,10 +14118,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -14148,9 +14148,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14163,9 +14163,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
             class _SurfaceMeshPreferences(PySingletonCommandArgumentsSubItem):
@@ -14178,19 +14178,19 @@ class Root(PyMenu):
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
-                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
-                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
                     self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
+                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -14208,19 +14208,19 @@ class Root(PyMenu):
                     Argument SMQualityImprove.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SMSeparationAngle.
+                    Argument ShowSurfaceMeshPreferences.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Argument SMSeparation.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ShowSurfaceMeshPreferences.
+                    Argument AutoMerge.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -14228,9 +14228,9 @@ class Root(PyMenu):
                     Argument TVMAutoControlCreation.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SMSeparation.
+                    Argument SMSeparationAngle.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -14243,9 +14243,9 @@ class Root(PyMenu):
                     Argument SMStepWidth.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument VolumeMeshMaxSize.
+                    Argument SMQualityMaxAngle.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -14253,14 +14253,14 @@ class Root(PyMenu):
                     Argument AutoAssignZoneTypes.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SMQualityMaxAngle.
+                    Argument VolumeMeshMaxSize.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImproveLimit.
+                    Argument SelfIntersectCheck.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -14268,9 +14268,9 @@ class Root(PyMenu):
                     Argument AutoSurfaceRemesh.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SelfIntersectCheck.
+                    Argument SMQualityImproveLimit.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -14360,10 +14360,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.NewLabelObjects = self._NewLabelObjects(self, "NewLabelObjects", service, rules, path)
-                    self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
+                    self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
                     self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
                     self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
-                    self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
+                    self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
                     self.NewLabelMax = self._NewLabelMax(self, "NewLabelMax", service, rules, path)
                     self.NewZoneType = self._NewZoneType(self, "NewZoneType", service, rules, path)
                     self.NewLabelCurvature = self._NewLabelCurvature(self, "NewLabelCurvature", service, rules, path)
@@ -14374,9 +14374,9 @@ class Root(PyMenu):
                     Argument NewLabelObjects.
                     """
 
-                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
+                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelCells.
+                    Argument NewLabelResolution.
                     """
 
                 class _NewLabelType(PyTextualCommandArgumentsSubItem):
@@ -14389,9 +14389,9 @@ class Root(PyMenu):
                     Argument NewLabels.
                     """
 
-                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
+                class _NewLabelCells(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelResolution.
+                    Argument NewLabelCells.
                     """
 
                 class _NewLabelMax(PyTextualCommandArgumentsSubItem):