ansys-fluent-core 0.29.dev2__py3-none-any.whl → 0.30.dev0__py3-none-any.whl

ansys/fluent/core/generated/solver/settings_251.pyi

@@ -826,68 +826,26 @@ class file(Group):
     def read(self, file_type: str, file_name: str, pdf_file_name: str, lightweight_setup: bool):
         """
         'read' command.
-        
-        Parameters
-        ----------
-            file_type : str
-                'file_type' child.
-            file_name_1 : str
-                'file_name' child.
-            pdf_file_name : str
-                'pdf_file_name' child.
-            lightweight_setup : bool
-                'lightweight_setup' child.
         """
     def read_case(self, file_name: str, pdf_file_name: str):
         """
         'read_case' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
-            pdf_file_name : str
-                'pdf_file_name' child.
         """
     def read_case_data(self, file_name: str, pdf_file_name: str):
         """
         'read_case_data' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
-            pdf_file_name : str
-                'pdf_file_name' child.
         """
     def read_case_setting(self, file_name: str, pdf_file_name: str):
         """
         'read_case_setting' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
-            pdf_file_name : str
-                'pdf_file_name' child.
         """
     def read_data(self, file_name: str):
         """
         'read_data' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
         """
     def read_mesh(self, file_name: str):
         """
         'read_mesh' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
         """
     def read_surface_mesh(self, filename: str, unit: str):
         """
@@ -934,49 +892,22 @@ class file(Group):
     def replace_mesh(self, file_name: str):
         """
         'replace_mesh' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
         """
     def write(self, file_type: str, file_name: str):
         """
         'write' command.
-        
-        Parameters
-        ----------
-            file_type : str
-                'file_type' child.
-            file_name : str
-                'file_name' child.
         """
     def write_case(self, file_name: str):
         """
         'write_case' command.
-        
-        Parameters
-        ----------
-            file_name : str
-                'file_name' child.
         """
     def write_data(self, file_name: str):
         """
         'write_data' command.
-        
-        Parameters
-        ----------
-            file_name : str
-                'file_name' child.
         """
     def write_case_data(self, file_name: str):
         """
         'write_case_data' command.
-        
-        Parameters
-        ----------
-            file_name : str
-                'file_name' child.
         """
     def read_settings(self, file_name: str):
         """
@@ -1949,15 +1880,6 @@ class polyhedra(Group):
     def convert_skewed_cells(self, cell_thread_list: list[str], max_cell_skewness: float | str, convert_skewed_cells: bool):
         """
         'convert_skewed_cells' command.
-        
-        Parameters
-        ----------
-            cell_thread_list : List
-                Set zones where cells should be converted.
-            max_cell_skewness : real
-                Set target maximum cell skewness.
-            convert_skewed_cells : bool
-                'convert_skewed_cells' child.
         """
 class wall_distance_method(String, AllowedValuesMixin):
     version: str
@@ -2023,15 +1945,6 @@ class mesh(Group):
     def scale(self, x_scale: float | str, y_scale: float | str, z_scale: float | str):
         """
         'scale' command.
-        
-        Parameters
-        ----------
-            x_scale : real
-                'x_scale' child.
-            y_scale : real
-                'y_scale' child.
-            z_scale : real
-                'z_scale' child.
         """
     def size_info(self):
         """
@@ -9060,20 +8973,10 @@ class u_table(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9097,20 +9000,10 @@ class y_table(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9156,20 +9049,10 @@ class internal_resistance_table(ListObject[internal_resistance_table_child]):
     def write_table(self, file_name: str):
         """
         Writing 3D table command.
-        
-        Parameters
-        ----------
-            file_name : str
-                Set file name in the 3D table-writing command.
         """
     def read_table(self, file_name: str):
         """
         3D Reading table command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                Set file name in the 3D table-reading command.
         """
     def print_table(self):
         """
@@ -9224,20 +9107,10 @@ class limit_current_table(ListObject[limit_current_table_child]):
     def write_table(self, file_name: str):
         """
         Writing 3D table command.
-        
-        Parameters
-        ----------
-            file_name : str
-                Set file name in the 3D table-writing command.
         """
     def read_table(self, file_name: str):
         """
         3D Reading table command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                Set file name in the 3D table-reading command.
         """
     def print_table(self):
         """
@@ -9412,20 +9285,10 @@ class table_rs(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9449,20 +9312,10 @@ class table_r1(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9486,20 +9339,10 @@ class table_c1(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9523,20 +9366,10 @@ class table_r2(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9560,20 +9393,10 @@ class table_c2(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9597,20 +9420,10 @@ class table_r3(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9634,20 +9447,10 @@ class table_c3(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9671,20 +9474,10 @@ class table_voc(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9708,20 +9501,10 @@ class table_rs_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9745,20 +9528,10 @@ class table_r1_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9782,20 +9555,10 @@ class table_c1_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9819,20 +9582,10 @@ class table_r2_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9856,20 +9609,10 @@ class table_c2_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9893,20 +9636,10 @@ class table_r3_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9930,20 +9663,10 @@ class table_c3_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -9967,20 +9690,10 @@ class table_voc_c(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -10753,20 +10466,10 @@ class fast_charging_table(ListObject[fast_charging_table_child]):
     def write_table(self, file_name: str):
         """
         Writing 3D table command.
-        
-        Parameters
-        ----------
-            file_name : str
-                Set file name in the 3D table-writing command.
         """
     def read_table(self, file_name: str):
         """
         3D Reading table command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                Set file name in the 3D table-reading command.
         """
     def print_table(self):
         """
@@ -10877,20 +10580,10 @@ class heat_correct_table(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -10926,20 +10619,10 @@ class table_discharge(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -10963,20 +10646,10 @@ class table_charge(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -11216,20 +10889,10 @@ class rate_table(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -11471,20 +11134,10 @@ class capacity_fade_table(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -11556,20 +11209,10 @@ class cycle_life_table(Group):
     def write_table(self, file_name: str):
         """
         2D table writting command.
-        
-        Parameters
-        ----------
-            file_name : str
-                File name in 2D table writting.
         """
     def read_table(self, file_name: str):
         """
         2D table reading command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                File name in 2D table reading.
         """
     def print_table(self):
         """
@@ -12279,21 +11922,6 @@ class rom_data_creator_tool(Group):
     def add_rom_parameter(self, parameter_type: str, entity_list: list[str], group_value: float | str, individual_or_group: bool, individual_value: bool, value_list: list[float | str]):
         """
         Add parameter command.
-        
-        Parameters
-        ----------
-            parameter_type : str
-                Set parameter type.
-            entity_list : List
-                Entity list name.
-            group_value : real
-                Set group value.
-            individual_or_group : bool
-                Set as-group option.
-            individual_value : bool
-                Set individual value for different entities in the group.
-            value_list : List
-                Set values for the different entities in the group.
         """
     def rom_data_creator(self, rom_type: int):
         """
@@ -33826,11 +33454,6 @@ class perforated_wall(Group):
     def read_input_file(self, file_name: str):
         """
         'read_input_file' command.
-        
-        Parameters
-        ----------
-            file_name : str
-                'file_name' child.
         """
 class degassing_verbosity(Integer, AllowedValuesMixin):
     version: str
@@ -35033,15 +34656,6 @@ class reference_values(Group):
     def compute(self, from_zone_type: str, from_zone_name: str, phase: str):
         """
         'compute' command.
-        
-        Parameters
-        ----------
-            from_zone_type : str
-                'from_zone_type' child.
-            from_zone_name : str
-                'from_zone_name' child.
-            phase : str
-                'phase' child.
         """
     def list_values(self):
         """
@@ -35403,11 +35017,6 @@ class named_expressions(NamedObject[named_expressions_child]):
     def compute(self, names: list[str]):
         """
         'compute' command.
-        
-        Parameters
-        ----------
-            names : List
-                'names' child.
         """
     child_object_type: named_expressions_child
 class enabled_54(Boolean):
@@ -35624,11 +35233,6 @@ class faces(NamedObject[faces_child]):
     def list_face(self, face_name: str):
         """
         'list_face' command.
-        
-        Parameters
-        ----------
-            face_name : str
-                'face_name' child.
         """
     child_object_type: faces_child
 class bodies_child(Group):
@@ -40740,28 +40344,10 @@ class profiles(Group):
     def display_profile_surface(self, profile_name: str, field_contour: bool, field_variable: str):
         """
         Display Profile Surface/field rendering command.
-        
-        Parameters
-        ----------
-            profile_name : str
-                Profile name.
-            field_contour : bool
-                Field contour?.
-            field_variable : str
-                Field variable.
         """
     def set_preference_profile_point_cloud_data(self, profile_point_marker: str, profile_point_marker_size: float | str, profile_point_marker_color: str):
         """
         Profile Point attributes command.
-        
-        Parameters
-        ----------
-            profile_point_marker : str
-                Profile point marker.
-            profile_point_marker_size : real
-                Profile point marker size.
-            profile_point_marker_color : str
-                Profile point marker color.
         """
     def overlay_profile_point_cloud_data(self, overlay: bool, profile_name: str, graphics_object: str, display_contour: bool, field_variable: str):
         """
@@ -40804,38 +40390,18 @@ class profiles(Group):
     def list_profile_parameters(self, profile_name: str):
         """
         List-profile-parameters-command.
-        
-        Parameters
-        ----------
-            profile_name : str
-                Profile name.
         """
     def list_profile_parameters_with_value(self, profile_name: str):
         """
         List-profile-parameters-with-value-command.
-        
-        Parameters
-        ----------
-            profile_name : str
-                Profile name.
         """
     def list_profile_fields(self, profile_name: str):
         """
         List-profile-fields-command.
-        
-        Parameters
-        ----------
-            profile_name : str
-                Profile name.
         """
     def delete(self, profile_name: str):
         """
         Delete-profile-command.
-        
-        Parameters
-        ----------
-            profile_name : str
-                Profile name.
         """
     def delete_all(self):
         """
@@ -47587,58 +47153,26 @@ class execute_commands(Group):
     def enable(self, command_name: str):
         """
         Enable an execute-command.
-        
-        Parameters
-        ----------
-            command_name : str
-                'command_name' child.
         """
     def disable(self, command_name: str):
         """
         Disable an execute-command.
-        
-        Parameters
-        ----------
-            command_name : str
-                'command_name' child.
         """
     def copy(self, command_name: str):
         """
         Copy an execute-command.
-        
-        Parameters
-        ----------
-            command_name : str
-                'command_name' child.
         """
     def delete(self, command_name: str):
         """
         Delete an execute-command.
-        
-        Parameters
-        ----------
-            command_name : str
-                'command_name' child.
         """
     def export(self, command_name: list[str], tsv_file_name: str):
         """
         Export execute-commands to a TSV file.
-        
-        Parameters
-        ----------
-            command_name : List
-                'command_name' child.
-            tsv_file_name : str
-                'tsv_file_name' child.
         """
     def import_(self, tsv_file_name: str):
         """
         Import execute-commands from a TSV file.
-        
-        Parameters
-        ----------
-            tsv_file_name_1 : str
-                'tsv_file_name' child.
         """
 class name_17(String):
     version: str
@@ -47970,27 +47504,6 @@ class case_modification(Group):
     def add_edit_modification(self, mod_name: str, mod_exists: bool, mod_active: bool, mod_execution_option: str, mod_iterations: int, mod_timesteps: int, mod_flowtime: float | str, mod_python: bool, mod_command: str):
         """
         Define a single case modification.
-        
-        Parameters
-        ----------
-            mod_name : str
-                Name of Modification.
-            mod_exists : bool
-                Modification Exists?.
-            mod_active : bool
-                Modification is Active?.
-            mod_execution_option : str
-                Execution Option for Transient.
-            mod_iterations : int
-                Modification Iterations.
-            mod_timesteps : int
-                Modification Time Steps.
-            mod_flowtime : real
-                Modification Flow Time.
-            mod_python : bool
-                Modification is Python?.
-            mod_command : str
-                Modification.
         """
     def copy_modification(self, mod_name: str):
         """
@@ -48040,13 +47553,6 @@ class case_modification(Group):
     def export_modifications(self, command_list: list[str], filename: str):
         """
         Export all case modifications to a tsv file.
-        
-        Parameters
-        ----------
-            command_list : List
-                'command_list' child.
-            filename_1 : str
-                'filename' child.
         """
     def continue_strategy_execution(self):
         """
@@ -54047,11 +53553,6 @@ class picture(Group):
     def save_picture(self, file_name: str):
         """
         'save_picture' command.
-        
-        Parameters
-        ----------
-            file_name : str
-                'file_name' child.
         """
     def list_color_mode(self):
         """
@@ -54295,11 +53796,6 @@ class display_states(NamedObject[display_states_child]):
     def use_active(self, state_name: str):
         """
         'use_active' command.
-        
-        Parameters
-        ----------
-            state_name : str
-                'state_name' child.
         """
     def restore_state(self, state_name: str):
         """
@@ -55086,15 +54582,6 @@ class pulse(Group):
     def write(self, object_name: str, write_format: str, file_name: str):
         """
         'write' command.
-        
-        Parameters
-        ----------
-            object_name : str
-                'object_name' child.
-            write_format : str
-                'write_format' child.
-            file_name : str
-                'file_name' child.
         """
 class periodic_type(String, AllowedValuesMixin):
     version: str
@@ -56252,11 +55739,6 @@ class scene_animation(Group):
     def read_animation(self, file_name: str):
         """
         'read_animation' command.
-        
-        Parameters
-        ----------
-            file_name_1 : str
-                'file_name' child.
         """
     def write_animation(self, format_name: str, file_name: str):
         """
@@ -56518,36 +56000,10 @@ class plot_write_sample(Group):
     def plot_sample(self, sample: str, variable_to_sample: str, weighting_variable: str, correlation_variable: str, file_name: str):
         """
         'plot_sample' command.
-        
-        Parameters
-        ----------
-            sample : str
-                'sample' child.
-            variable_to_sample : str
-                'variable_to_sample' child.
-            weighting_variable : str
-                'weighting_variable' child.
-            correlation_variable : str
-                'correlation_variable' child.
-            file_name : str
-                'file_name' child.
         """
     def write_sample(self, sample: str, variable_to_sample: str, weighting_variable: str, correlation_variable: str, file_name: str):
         """
         'write_sample' command.
-        
-        Parameters
-        ----------
-            sample : str
-                'sample' child.
-            variable_to_sample : str
-                'variable_to_sample' child.
-            weighting_variable : str
-                'weighting_variable' child.
-            correlation_variable : str
-                'correlation_variable' child.
-            file_name : str
-                'file_name' child.
         """
 class use_weighting(Boolean):
     version: str
@@ -56601,13 +56057,6 @@ class setup_reduction(Group):
     def set_maximum(self, sample_var: str, max_val: float | str):
         """
         'set_maximum' command.
-        
-        Parameters
-        ----------
-            sample_var : str
-                'sample_var' child.
-            max_val : real
-                'max_val' child.
         """
     def use_logarithmic(self, sample_var: str, enable_log: bool):
         """
@@ -56697,11 +56146,6 @@ class histogram_1(Group):
     def delete_sample(self, sample: str):
         """
         'delete_sample' command.
-        
-        Parameters
-        ----------
-            sample : str
-                'sample' child.
         """
     def list_samples(self):
         """
@@ -56746,44 +56190,10 @@ class sample_trajectories(Group):
     def compute(self, injections: list[str], boundaries: list[str], lines: list[str], planes: list[str], op_udf: str, append_sample: bool, accumulate_rates: bool):
         """
         'compute' command.
-        
-        Parameters
-        ----------
-            injections : List
-                'injections' child.
-            boundaries : List
-                'boundaries' child.
-            lines : List
-                Select surface.
-            planes : List
-                Select surface.
-            op_udf : str
-                'op_udf' child.
-            append_sample : bool
-                'append_sample' child.
-            accumulate_rates : bool
-                'accumulate_rates' child.
         """
     def start_file_write(self, injections: list[str], boundaries: list[str], lines: list[str], planes: list[str], op_udf: str, append_sample: bool, accumulate_rates: bool):
         """
         'start_file_write' command.
-        
-        Parameters
-        ----------
-            injections : List
-                'injections' child.
-            boundaries : List
-                'boundaries' child.
-            lines : List
-                Select surface.
-            planes : List
-                Select surface.
-            op_udf : str
-                'op_udf' child.
-            append_sample : bool
-                'append_sample' child.
-            accumulate_rates : bool
-                'accumulate_rates' child.
         """
     def stop_file_write(self):
         """
@@ -56842,23 +56252,6 @@ class discrete_phase_6(Group):
     def set_per_injection_zone_summaries(self, enable: bool, reset_dpm_summaries: bool):
         """
         Enable per-injection per-zone DPM summary reports.
-        
-        Parameters
-        ----------
-            enable : bool
-                Specify whether to enable or disable the per-injection per-zone DPM summary reports.
-        Enabling them will mean that more memory will be used to hold the data being collected.
-        For unsteady tracking, if some data for DPM summary reports have already been collected,
-        they will continue to be shown just specific to the zone, not any injection, while
-        data collected in the future will be shown both zone- and injection-specific.
-        Disabling requires that both the current DPM summary report data are reset
-        and all particle parcels currently in the domain are cleared out(!).
-            reset_dpm_summaries : bool
-                Disabling the per-injection per-zone DPM summary reports requires that
-        both the current DPM summary report data are reset and all particle
-        parcels currently in the domain are cleared out(!).
-        Set this command argument / check this checkbox to
-        confirm that you want to proceed as described.
         """
     _child_aliases: dict
 class fluxes(Group):
@@ -58693,21 +58086,6 @@ class report_2(Group):
     def vbm(self, output_quantity: str, rotor_name: str, scale_output: bool, write_to_file: bool, file_name: str, append: bool):
         """
         'vbm' command.
-        
-        Parameters
-        ----------
-            output_quantity : str
-                'output_quantity' child.
-            rotor_name : str
-                'rotor_name' child.
-            scale_output : bool
-                'scale_output' child.
-            write_to_file : bool
-                'write_to_file' child.
-            file_name : str
-                'file_name' child.
-            append : bool
-                'append' child.
         """
     def get_forces(self, option: str, domain: str, wall_zones: list[str], direction_vector: list[float | str], momentum_center: list[float | str], momentum_axis: list[float | str], pressure_coordinate: str, coordinate_value: float | str):
         """
@@ -63572,13 +62950,6 @@ class network_2(Group):
     def kill_node(self, compute_node: int, invalidate_case: bool):
         """
         'kill_node' command.
-        
-        Parameters
-        ----------
-            compute_node : int
-                'compute_node' child.
-            invalidate_case : bool
-                'invalidate_case' child.
         """
     def spawn_node(self, hostname: str, username: str):
         """