ansys-fluent-core 0.28.2__py3-none-any.whl → 0.29.dev1__py3-none-any.whl

ansys/fluent/tests/test_preferences.py

@@ -1,89 +0,0 @@
-import pytest
-
-from ansys.fluent.core.services.datamodel_se import ReadOnlyObjectError
-
-
-@pytest.mark.codegen_required
-def test_solver_preferences(new_solver_session):
-    solver = new_solver_session
-    preferred_meshing = solver.preferences.MeshingWorkflow
-    preferred_meshing.Verbosity = "off"
-    assert preferred_meshing.Verbosity() == "off"
-
-    with pytest.raises(ReadOnlyObjectError):
-        preferred_meshing.CheckpointingOption = "Write into memory"
-    assert preferred_meshing.CheckpointingOption() == "Write mesh files"
-
-    preferred_drawing = preferred_meshing.DrawSettings
-    preferred_drawing.FacetLimit = 6000000
-    assert preferred_drawing.FacetLimit() == 6000000
-    preferred_drawing.FaceZoneLimit = 15000
-    assert preferred_drawing.FaceZoneLimit() == 15000
-
-    ansys_logo = solver.preferences.Appearance.AnsysLogo
-    ansys_logo.Color = "white"
-    assert ansys_logo.Color() == "white"
-
-    ansys_logo.Color = "black"
-    assert ansys_logo.Color() == "black"
-
-    ansys_logo.Visible = True
-    assert ansys_logo.Visible() is True
-
-    perfered_graphics = solver.preferences.Graphics
-    perfered_graphics.AnimationOption = "wireframe"
-    assert perfered_graphics.AnimationOption() == "wireframe"
-
-    solver.exit()
-
-
-@pytest.mark.codegen_required
-def test_meshing_preferences(new_meshing_session):
-    meshing = new_meshing_session
-    preferred_meshing = meshing.preferences.MeshingWorkflow
-    preferred_meshing.Verbosity = "off"
-    assert preferred_meshing.Verbosity() == "off"
-
-    with pytest.raises(ReadOnlyObjectError):
-        preferred_meshing.CheckpointingOption = "Write into memory"
-    assert preferred_meshing.CheckpointingOption() == "Write mesh files"
-
-    preferred_drawing = preferred_meshing.DrawSettings
-    preferred_drawing.FacetLimit = 6000000
-    assert preferred_drawing.FacetLimit() == 6000000
-
-    preferred_drawing.FaceZoneLimit = 15000
-    assert preferred_drawing.FaceZoneLimit() == 15000
-
-    ansys_logo = meshing.preferences.Appearance.AnsysLogo
-    ansys_logo.Color = "white"
-    assert ansys_logo.Color() == "white"
-
-    ansys_logo.Color = "black"
-    assert ansys_logo.Color() == "black"
-
-    ansys_logo.Visible = True
-    assert ansys_logo.Visible() is True
-
-    preferred_graphics = meshing.preferences.Graphics
-    preferred_graphics.AnimationOption = "wireframe"
-    assert preferred_graphics.AnimationOption() == "wireframe"
-
-    meshing.exit()
-
-
-@pytest.mark.codegen_required
-def test_read_only_preferences(new_solver_session):
-    solver = new_solver_session
-    m = solver.preferences.MeshingWorkflow
-    m.SaveCheckpointFiles = True
-    assert m.SaveCheckpointFiles() is True
-    assert m.CheckpointingOption() == "Write mesh files"
-    assert m.CheckpointingOption.is_read_only() is True
-    with pytest.raises(RuntimeError):
-        m.CheckpointingOption = "Write into memory"
-    m.SaveCheckpointFiles = False
-    assert m.SaveCheckpointFiles() is False
-    assert m.CheckpointingOption.is_read_only() is False
-    m.CheckpointingOption = "Write into memory"
-    assert m.CheckpointingOption() == "Write into memory"

ansys/fluent/tests/test_pure_mesh_vs_mesh_workflow.py

@@ -1,101 +0,0 @@
-import pytest
-
-from ansys.fluent.core.examples import download_file
-
-
-@pytest.mark.codegen_required
-@pytest.mark.fluent_version(">=23.1")
-def test_pure_meshing_mode(mixing_elbow_watertight_pure_meshing_session):
-    pure_meshing_session = mixing_elbow_watertight_pure_meshing_session
-    # check a few dir elements
-    # n.b. 'field_data', 'field_info' need to
-    # be eliminated from meshing sessions
-    session_dir = dir(pure_meshing_session)
-    for attr in ("fields", "meshing", "workflow"):
-        assert attr in session_dir
-    workflow = pure_meshing_session.workflow
-    workflow_dir = dir(workflow)
-    for attr in ("TaskObject", "InsertNewTask", "Workflow", "setState"):
-        assert attr in workflow_dir
-    import_geometry = workflow.TaskObject["Import Geometry"]
-    import_geometry_dir = dir(import_geometry)
-    for attr in ("AddChildToTask", "Arguments", "Execute", "setState"):
-        assert attr in import_geometry_dir
-    with pytest.raises(AttributeError):
-        pure_meshing_session.switch_to_solver()
-
-
-@pytest.mark.codegen_required
-@pytest.mark.fluent_version(">=23.1")
-def test_meshing_mode(new_meshing_session):
-    meshing_session = new_meshing_session
-    # check a few dir elements
-    # n.b. 'field_data', 'field_info' need to
-    # be eliminated from meshing sessions
-    session_dir = dir(meshing_session)
-    for attr in ("fields", "meshing", "workflow"):
-        assert attr in session_dir
-    assert meshing_session.workflow.InitializeWorkflow(
-        WorkflowType="Watertight Geometry"
-    )
-    assert meshing_session.switch_to_solver()
-
-
-@pytest.mark.codegen_required
-@pytest.mark.fluent_version(">=23.1")
-def test_meshing_and_solver_mode_exit(new_meshing_session):
-    meshing_session = new_meshing_session
-    solver_session = meshing_session.switch_to_solver()
-    # Even if exit statement is invoked twice, only one is executed as the channel instance is shared
-    meshing_session.exit()
-    solver_session.exit()
-
-
-@pytest.mark.codegen_required
-@pytest.mark.fluent_version(">=23.1")
-def test_meshing_mode_post_switching_to_solver(new_meshing_session):
-    meshing_session = new_meshing_session
-    meshing_session.switch_to_solver()
-    # Post switching to solver session, meshing session specific attributes are unavailable
-    with pytest.raises(AttributeError):
-        meshing_session.workflow.InitializeWorkflow(WorkflowType="Watertight Geometry")
-
-
-# def test_transfer_mesh_to_solvers(
-#     new_pure_meshing_session, new_solver_session
-# ):
-#     mesh_file_name = download_file("mixing_elbow.msh.h5", "pyfluent/mixing_elbow")
-#     pure_meshing_session = new_pure_meshing_session
-#     pure_meshing_session.tui.file.read_mesh(mesh_file_name)
-#     pure_meshing_session.tui.mesh.check_mesh()
-#     mesh_info = pure_meshing_session.scheme_eval.string_eval(
-#         "(%tg-length-of-entity-list)"
-#     )
-#     pure_meshing_session_cell_count = mesh_info.strip("( )").split()[3]
-#
-#     solver_session = new_solver_session
-#     pure_meshing_session.transfer_mesh_to_solvers([solver_session], file_type="mesh")
-#     solver_session.tui.mesh.check()
-#     mesh_info = solver_session.scheme_eval.string_eval("(inquire-grids)")
-#     solver_session_cell_count = mesh_info.strip("( )").split()[1]
-#
-#     assert pure_meshing_session_cell_count == solver_session_cell_count
-
-
-def test_transfer_case_to_solvers(new_pure_meshing_session, new_solver_session):
-    case_file_name = download_file("mixing_elbow.cas.h5", "pyfluent/mixing_elbow")
-    pure_meshing_session = new_pure_meshing_session
-    pure_meshing_session.tui.file.read_case(case_file_name)
-    pure_meshing_session.tui.mesh.check_mesh()
-    mesh_info = pure_meshing_session.scheme_eval.string_eval(
-        "(%tg-length-of-entity-list)"
-    )
-    pure_meshing_session_cell_count = mesh_info.strip("( )").split()[3]
-
-    solver_session = new_solver_session
-    pure_meshing_session.transfer_mesh_to_solvers([solver_session], file_type="case")
-    solver_session.tui.mesh.check()
-    mesh_info = solver_session.scheme_eval.string_eval("(inquire-grids)")
-    solver_session_cell_count = mesh_info.strip("( )").split()[1]
-
-    assert pure_meshing_session_cell_count == solver_session_cell_count

ansys/fluent/tests/test_reduction.py

@@ -1,484 +0,0 @@
-from typing import Any
-
-import pytest
-
-from ansys.fluent.core.examples import download_file
-from ansys.fluent.core.services.reduction import _locn_names_and_objs
-from ansys.fluent.core.solver.function import reduction
-
-
-def _test_locn_extraction(solver1, solver2):
-    solver1_boundary_conditions = solver1.setup.boundary_conditions
-    solver2_boundary_conditions = solver2.setup.boundary_conditions
-    locns = _locn_names_and_objs(["inlet1"])
-    assert locns == [["inlet1", ["inlet1"]]]
-
-    all_bcs = solver1_boundary_conditions
-    locns = _locn_names_and_objs(all_bcs)
-    assert locns == [
-        ["interior--fluid", all_bcs],
-        ["outlet", all_bcs],
-        ["inlet1", all_bcs],
-        ["inlet2", all_bcs],
-        ["wall", all_bcs],
-    ]
-
-    locns = _locn_names_and_objs([all_bcs["inlet1"]])
-    assert locns == [["inlet1", all_bcs["inlet1"]]]
-
-    all_bcs = solver1_boundary_conditions
-    all_bcs2 = solver2_boundary_conditions
-    locns = _locn_names_and_objs([all_bcs, all_bcs2])
-    assert locns == [
-        ["interior--fluid", all_bcs],
-        ["outlet", all_bcs],
-        ["inlet1", all_bcs],
-        ["inlet2", all_bcs],
-        ["wall", all_bcs],
-        ["interior--fluid", all_bcs2],
-        ["outlet", all_bcs2],
-        ["inlet1", all_bcs2],
-        ["inlet2", all_bcs2],
-        ["wall", all_bcs2],
-    ]
-
-
-def _test_context(solver):
-    solver.solution.initialization.hybrid_initialize()
-
-    assert solver.fields.reduction.area(
-        locations=[solver.setup.boundary_conditions.velocity_inlet["inlet1"]],
-        ctxt=solver,
-    )
-
-    assert solver.fields.reduction.area(locations=["inlet1"], ctxt=solver)
-
-
-def _test_area_average(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver_named_expressions = solver.setup.named_expressions
-    solver_named_expressions["test_expr_1"] = {}
-    solver_named_expressions["test_expr_1"].definition = (
-        "AreaAve(AbsolutePressure, ['inlet1'])"
-    )
-    expr_val = solver_named_expressions["test_expr_1"].get_value()
-    assert isinstance(expr_val, float) and expr_val != 0.0
-    val = solver.fields.reduction.area_average(
-        expression="AbsolutePressure",
-        locations=solver.setup.boundary_conditions.velocity_inlet,
-    )
-    assert val == expr_val
-    solver_named_expressions.pop(key="test_expr_1")
-
-
-def _test_min(solver1, solver2):
-    s1_min = solver1.fields.reduction.minimum(
-        expression="AbsolutePressure",
-        locations=[solver1.setup.boundary_conditions.velocity_inlet],
-    )
-    s2_min = solver2.fields.reduction.minimum(
-        expression="AbsolutePressure",
-        locations=[solver2.setup.boundary_conditions.velocity_inlet],
-    )
-    result = reduction.minimum(
-        expression="AbsolutePressure",
-        locations=[
-            solver1.setup.boundary_conditions.velocity_inlet,
-            solver2.setup.boundary_conditions.velocity_inlet,
-        ],
-    )
-    assert result == min(s1_min, s2_min)
-
-
-def _test_count(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver_named_expressions = solver.setup.named_expressions
-    s_velocity_inlet = solver.setup.boundary_conditions.velocity_inlet
-    solver_named_expressions["test_expr_1"] = {}
-    solver_named_expressions["test_expr_1"].definition = "Count(['inlet1'])"
-    expr_val_1 = solver_named_expressions["test_expr_1"].get_value()
-    solver_named_expressions["test_expr_1"].definition = "Count(['inlet2'])"
-    expr_val_2 = solver_named_expressions["test_expr_1"].get_value()
-    solver_named_expressions["test_expr_1"].definition = "Count(['inlet1', 'inlet2'])"
-    expr_val_3 = solver_named_expressions["test_expr_1"].get_value()
-    assert expr_val_3 == expr_val_1 + expr_val_2
-    red_val_1 = solver.fields.reduction.count(locations=[s_velocity_inlet["inlet1"]])
-    red_val_2 = solver.fields.reduction.count(locations=[s_velocity_inlet["inlet2"]])
-    red_val_3 = solver.fields.reduction.count(locations=[s_velocity_inlet])
-    assert red_val_1 == expr_val_1
-    assert red_val_2 == expr_val_2
-    assert red_val_3 == expr_val_3
-    solver_named_expressions.pop(key="test_expr_1")
-
-
-def _test_count_if(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver_named_expressions = solver.setup.named_expressions
-    s_velocity_inlet = solver.setup.boundary_conditions.velocity_inlet
-    solver_named_expressions["test_expr_1"] = {}
-    solver_named_expressions["test_expr_1"].definition = (
-        "CountIf(AbsolutePressure > 0[Pa], ['inlet1'])"
-    )
-    expr_val_1 = solver_named_expressions["test_expr_1"].get_value()
-    solver_named_expressions["test_expr_1"].definition = (
-        "CountIf(AbsolutePressure > 0[Pa], ['inlet2'])"
-    )
-    expr_val_2 = solver_named_expressions["test_expr_1"].get_value()
-    solver_named_expressions["test_expr_1"].definition = (
-        "CountIf(AbsolutePressure > 0[Pa], ['inlet1', 'inlet2'])"
-    )
-    expr_val_3 = solver_named_expressions["test_expr_1"].get_value()
-    assert expr_val_3 == expr_val_1 + expr_val_2
-    red_val_1 = solver.fields.reduction.count_if(
-        condition="AbsolutePressure > 0[Pa]", locations=["inlet1"]
-    )
-    red_val_2 = solver.fields.reduction.count_if(
-        condition="AbsolutePressure > 0[Pa]", locations=[s_velocity_inlet["inlet2"]]
-    )
-    red_val_3 = solver.fields.reduction.count_if(
-        condition="AbsolutePressure > 0[Pa]", locations=[s_velocity_inlet]
-    )
-    assert red_val_1 == expr_val_1
-    assert red_val_2 == expr_val_2
-    assert red_val_3 == expr_val_3
-    solver_named_expressions.pop(key="test_expr_1")
-
-
-def _test_centroid(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver_named_expressions = solver.setup.named_expressions
-    velocity_inlet = solver.setup.boundary_conditions.velocity_inlet
-    solver_named_expressions["test_expr_1"] = {}
-    solver_named_expressions["test_expr_1"].definition = "Centroid(['inlet1'])"
-    expr_val_1 = solver_named_expressions["test_expr_1"].get_value()
-    solver_named_expressions["test_expr_1"].definition = "Centroid(['inlet2'])"
-    expr_val_2 = solver_named_expressions["test_expr_1"].get_value()
-    solver_named_expressions["test_expr_1"].definition = (
-        "Centroid(['inlet1', 'inlet2'])"
-    )
-    expr_val_3 = solver_named_expressions["test_expr_1"].get_value()
-    red_val_1 = solver.fields.reduction.centroid(locations=[velocity_inlet["inlet1"]])
-    red_val_2 = solver.fields.reduction.centroid(locations=[velocity_inlet["inlet2"]])
-    red_val_3 = solver.fields.reduction.centroid(locations=[velocity_inlet])
-    assert [red_val_1[0], red_val_1[1], red_val_1[2]] == expr_val_1
-    assert [red_val_2[0], red_val_2[1], red_val_2[2]] == expr_val_2
-    assert [red_val_3[0], red_val_3[1], red_val_3[2]] == expr_val_3
-    solver_named_expressions.pop(key="test_expr_1")
-
-
-def _test_area_integrated_average(solver1, solver2):
-    solver1.solution.initialization.hybrid_initialize()
-    solver2.solution.initialization.hybrid_initialize()
-    solver1_boundary_conditions = solver1.setup.boundary_conditions
-    solver2_boundary_conditions = solver2.setup.boundary_conditions
-    solver1_named_expr = solver1.setup.named_expressions
-    solver2_named_expr = solver2.setup.named_expressions
-
-    solver1_named_expr["test_expr_1"] = {}
-    solver1_named_expr["test_expr_1"].definition = (
-        "AreaInt(AbsolutePressure, ['inlet1'])"
-    )
-    expr_val_1 = solver1_named_expr["test_expr_1"].get_value()
-
-    solver1_named_expr["test_expr_1"].definition = (
-        "AreaInt(AbsolutePressure, ['inlet2'])"
-    )
-    expr_val_2 = solver1_named_expr["test_expr_1"].get_value()
-    solver1_named_expr["test_expr_1"].definition = (
-        "AreaInt(AbsolutePressure, ['inlet1', 'inlet2'])"
-    )
-    expr_val_3 = solver1_named_expr["test_expr_1"].get_value()
-
-    assert expr_val_3 - (expr_val_1 + expr_val_2) <= 0.000000001
-
-    red_val_1 = solver1.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[solver1_boundary_conditions.velocity_inlet["inlet1"]],
-    )
-    red_val_2 = solver1.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[solver1_boundary_conditions.velocity_inlet["inlet2"]],
-    )
-    red_val_3 = solver1.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[solver1_boundary_conditions.velocity_inlet],
-    )
-
-    assert red_val_1 == expr_val_1
-    assert red_val_2 == expr_val_2
-    assert red_val_3 == expr_val_3
-
-    solver2_named_expr["test_expr_1"] = {}
-    solver2_named_expr["test_expr_1"].definition = (
-        "AreaInt(AbsolutePressure, ['inlet1'])"
-    )
-    expr_val_4 = solver2_named_expr["test_expr_1"].get_value()
-
-    solver2_named_expr["test_expr_1"].definition = (
-        "AreaInt(AbsolutePressure, ['inlet2'])"
-    )
-    expr_val_5 = solver2_named_expr["test_expr_1"].get_value()
-    solver2_named_expr["test_expr_1"].definition = (
-        "AreaInt(AbsolutePressure, ['inlet1', 'inlet2'])"
-    )
-    expr_val_6 = solver2_named_expr["test_expr_1"].get_value()
-
-    assert expr_val_6 - (expr_val_4 + expr_val_5) <= 0.000000001
-
-    red_val_4 = solver2.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[solver2_boundary_conditions.velocity_inlet["inlet1"]],
-    )
-    red_val_5 = solver2.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[solver2_boundary_conditions.velocity_inlet["inlet2"]],
-    )
-    red_val_6 = solver2.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[solver2_boundary_conditions.velocity_inlet],
-    )
-
-    assert red_val_4 == expr_val_4
-    assert red_val_5 == expr_val_5
-    assert red_val_6 == expr_val_6
-
-    red_val_7 = solver2.fields.reduction.area_integral(
-        expression="AbsolutePressure",
-        locations=[
-            solver1_boundary_conditions.velocity_inlet,
-            solver2_boundary_conditions.velocity_inlet,
-        ],
-    )
-
-    assert red_val_7 - (expr_val_3 + expr_val_6) <= 0.000000001
-
-    solver1_named_expr.pop(key="test_expr_1")
-
-
-def _test_error_handling(solver):
-    if int(solver._version) < 241:
-        with pytest.raises(RuntimeError):
-            solver.fields.reduction.area_average(
-                expression="AbsoluteVelocity",  # This is a wrong expression intentionally passed
-                locations=solver.setup.boundary_conditions.velocity_inlet,
-            )
-
-
-def _test_force(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver_named_expressions = solver.setup.named_expressions
-    solver_named_expressions["test_expr_1"] = {}
-    solver_named_expressions["test_expr_1"].definition = "Force(['wall'])"
-    expr_val_1 = solver_named_expressions["test_expr_1"].get_value()
-
-    red_total_force = solver.fields.reduction.force(
-        locations=[solver.setup.boundary_conditions.wall]
-    )
-    red_pressure_force = solver.fields.reduction.pressure_force(
-        locations=[solver.setup.boundary_conditions.wall]
-    )
-    red_viscous_force = solver.fields.reduction.viscous_force(
-        locations=[solver.setup.boundary_conditions.wall]
-    )
-
-    assert [red_total_force[0], red_total_force[1], red_total_force[2]] == expr_val_1
-
-    assert red_pressure_force[0] + red_viscous_force[0] == red_total_force[0]
-
-    assert red_pressure_force[1] + red_viscous_force[1] == red_total_force[1]
-
-    assert red_pressure_force[2] + red_viscous_force[2] == red_total_force[2]
-
-    solver_named_expressions.pop(key="test_expr_1")
-
-
-def _test_moment(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver_named_expressions = solver.setup.named_expressions
-    location = solver.setup.boundary_conditions.wall
-    solver_named_expressions["test_expr_1"] = {}
-    solver_named_expressions["test_expr_1"].definition = (
-        "Moment(Force(['wall']),['wall'])"
-    )
-    expr_val_1 = solver_named_expressions["test_expr_1"].get_value()
-
-    solver_named_expressions["test_expr_1"].definition = "Moment(['inlet1'],['wall'])"
-    expr_val_2 = solver_named_expressions["test_expr_1"].get_value()
-
-    red_moment_force = solver.fields.reduction.moment(
-        expression="Force(['wall'])", locations=[location]
-    )
-
-    red_moment_location = solver.fields.reduction.moment(
-        expression="['inlet1']", locations=[location]
-    )
-
-    assert [red_moment_force[0], red_moment_force[1], red_moment_force[2]] == expr_val_1
-    assert [
-        red_moment_location[0],
-        red_moment_location[1],
-        red_moment_location[2],
-    ] == expr_val_2
-
-    solver_named_expressions.pop(key="test_expr_1")
-
-
-def _test_sum(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver.setup.named_expressions["test_expr_1"] = {}
-    solver.setup.named_expressions["test_expr_1"].definition = (
-        "Sum(AbsolutePressure, ['inlet1'], Weight=Area)"
-    )
-    expr_val = solver.setup.named_expressions["test_expr_1"].get_value()
-    assert isinstance(expr_val, float) and expr_val != 0.0
-
-    val = solver.fields.reduction.sum(
-        expression="AbsolutePressure",
-        locations=[solver.setup.boundary_conditions.velocity_inlet["inlet1"]],
-        weight="Area",
-    )
-
-    assert val == expr_val
-    solver.setup.named_expressions.pop(key="test_expr_1")
-
-
-def _test_sum_if(solver):
-    solver.solution.initialization.hybrid_initialize()
-    solver.setup.named_expressions["test_expr_1"] = {}
-    solver.setup.named_expressions["test_expr_1"].definition = (
-        "SumIf(AbsolutePressure, AbsolutePressure > 0[Pa], ['inlet1'], Weight=Area)"
-    )
-    expr_val = solver.setup.named_expressions["test_expr_1"].get_value()
-    assert isinstance(expr_val, float) and expr_val != 0.0
-
-    val = solver.fields.reduction.sum_if(
-        expression="AbsolutePressure",
-        condition="AbsolutePressure > 0[Pa]",
-        locations=[solver.setup.boundary_conditions.velocity_inlet["inlet1"]],
-        weight="Area",
-    )
-
-    assert val == expr_val
-    solver.setup.named_expressions.pop(key="test_expr_1")
-
-
-def _test_centroid_2_sources(solver1, solver2):
-    s1_cent = solver1.fields.reduction.centroid(
-        locations=[solver1.setup.boundary_conditions.velocity_inlet]
-    )
-    s2_cent = solver2.fields.reduction.centroid(
-        locations=[solver2.setup.boundary_conditions.velocity_inlet]
-    )
-
-    result = reduction.centroid(
-        locations=[
-            solver1.setup.boundary_conditions.velocity_inlet,
-            solver2.setup.boundary_conditions.velocity_inlet,
-        ]
-    )
-    assert [round(x, 5) for x in result] == [
-        (round(x, 5) + round(y, 5)) / 2 for x, y in zip(*[s1_cent, s2_cent])
-    ]
-
-
-@pytest.fixture
-def static_mixer_case_session2(static_mixer_case_session: Any):
-    return static_mixer_case_session
-
-
-@pytest.mark.nightly
-@pytest.mark.fluent_version(">=23.1")
-def test_reductions(
-    static_mixer_case_session: Any, static_mixer_case_session2: Any
-) -> None:
-    solver1 = static_mixer_case_session
-    solver2 = static_mixer_case_session2
-    _test_context(solver1)
-    _test_locn_extraction(solver1, solver2)
-    _test_area_average(solver1)
-    _test_count(solver1)
-    _test_count_if(solver1)
-    _test_centroid(solver1)
-    _test_area_integrated_average(solver1, solver2)
-    _test_error_handling(solver1)
-    _test_force(solver1)
-    _test_moment(solver1)
-    _test_sum(solver1)
-    _test_sum_if(solver1)
-    # The case and data are changed after this point to check the functional reduction with multiple solvers
-    case_path = download_file(
-        file_name="exhaust_system.cas.h5", directory="pyfluent/exhaust_system"
-    )
-    download_file(
-        file_name="exhaust_system.dat.h5", directory="pyfluent/exhaust_system"
-    )
-    solver1.file.read_case_data(file_name=case_path)
-    case_path1 = download_file("elbow1.cas.h5", "pyfluent/file_session")
-    download_file("elbow1.dat.h5", "pyfluent/file_session")
-    solver2.file.read_case_data(file_name=case_path1)
-    _test_min(solver1, solver2)
-    _test_centroid_2_sources(solver1, solver2)
-
-
-@pytest.mark.fluent_version(">=24.2")
-def test_reduction_does_not_modify_case(static_mixer_case_session: Any):
-    solver = static_mixer_case_session
-    # After reading the static-mixer case in Fluent, case-modifed? flag is somehow True
-    solver.scheme_eval.scheme_eval("(%save-case-id)")
-    assert not solver.scheme_eval.scheme_eval("(case-modified?)")
-    solver.reduction.area_average(
-        expression="AbsolutePressure",
-        locations=solver.setup.boundary_conditions.velocity_inlet,
-    )
-    assert not solver.scheme_eval.scheme_eval("(case-modified?)")
-
-
-@pytest.mark.fluent_version(">=24.2")
-def test_fix_for_invalid_location_inputs(static_mixer_case_session: Any):
-    solver = static_mixer_case_session
-    solver.solution.initialization.hybrid_initialize()
-
-    assert solver.fields.reduction.area(locations=["inlet1"], ctxt=solver)
-
-    with pytest.raises(ValueError):
-        assert solver.fields.reduction.area(locations=["inlet-1"], ctxt=solver)
-
-    with pytest.raises(KeyError):
-        assert solver.fields.reduction.area(
-            locations=[solver.setup.boundary_conditions.velocity_inlet["inlet-1"]]
-        )
-
-    assert solver.fields.reduction.area(locations=["inlet1"])
-
-    with pytest.raises(ValueError):
-        assert solver.fields.reduction.area(locations=["inlet-1"])
-
-
-@pytest.mark.fluent_version(">=25.2")
-def test_fix_for_empty_location_inputs(static_mixer_case_session: Any):
-    solver = static_mixer_case_session
-    solver.solution.initialization.hybrid_initialize()
-
-    assert solver.fields.reduction.area(locations=["inlet1"])
-
-    with pytest.raises(RuntimeError):
-        assert reduction.area(locations=[], ctxt=solver)
-
-    with pytest.raises(RuntimeError):
-        assert reduction.area_average(
-            expression="AbsolutePressure", locations=[], ctxt=solver
-        )
-
-    with pytest.raises(RuntimeError):
-        assert reduction.centroid(locations=[], ctxt=solver)
-
-    with pytest.raises(RuntimeError):
-        assert solver.fields.reduction.area(locations=[])
-
-    with pytest.raises(RuntimeError):
-        assert solver.fields.reduction.area_average(
-            expression="AbsolutePressure", locations=[]
-        )
-
-    with pytest.raises(RuntimeError):
-        assert solver.fields.reduction.centroid(locations=[])