android-notify 1.60.0__py3-none-any.whl → 1.60.1__py3-none-any.whl

venv/Lib/site-packages/pip/_vendor/urllib3/util/url.py

@@ -1,435 +0,0 @@
-from __future__ import absolute_import
-
-import re
-from collections import namedtuple
-
-from ..exceptions import LocationParseError
-from ..packages import six
-
-url_attrs = ["scheme", "auth", "host", "port", "path", "query", "fragment"]
-
-# We only want to normalize urls with an HTTP(S) scheme.
-# urllib3 infers URLs without a scheme (None) to be http.
-NORMALIZABLE_SCHEMES = ("http", "https", None)
-
-# Almost all of these patterns were derived from the
-# 'rfc3986' module: https://github.com/python-hyper/rfc3986
-PERCENT_RE = re.compile(r"%[a-fA-F0-9]{2}")
-SCHEME_RE = re.compile(r"^(?:[a-zA-Z][a-zA-Z0-9+-]*:|/)")
-URI_RE = re.compile(
-    r"^(?:([a-zA-Z][a-zA-Z0-9+.-]*):)?"
-    r"(?://([^\\/?#]*))?"
-    r"([^?#]*)"
-    r"(?:\?([^#]*))?"
-    r"(?:#(.*))?$",
-    re.UNICODE | re.DOTALL,
-)
-
-IPV4_PAT = r"(?:[0-9]{1,3}\.){3}[0-9]{1,3}"
-HEX_PAT = "[0-9A-Fa-f]{1,4}"
-LS32_PAT = "(?:{hex}:{hex}|{ipv4})".format(hex=HEX_PAT, ipv4=IPV4_PAT)
-_subs = {"hex": HEX_PAT, "ls32": LS32_PAT}
-_variations = [
-    #                            6( h16 ":" ) ls32
-    "(?:%(hex)s:){6}%(ls32)s",
-    #                       "::" 5( h16 ":" ) ls32
-    "::(?:%(hex)s:){5}%(ls32)s",
-    # [               h16 ] "::" 4( h16 ":" ) ls32
-    "(?:%(hex)s)?::(?:%(hex)s:){4}%(ls32)s",
-    # [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
-    "(?:(?:%(hex)s:)?%(hex)s)?::(?:%(hex)s:){3}%(ls32)s",
-    # [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
-    "(?:(?:%(hex)s:){0,2}%(hex)s)?::(?:%(hex)s:){2}%(ls32)s",
-    # [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
-    "(?:(?:%(hex)s:){0,3}%(hex)s)?::%(hex)s:%(ls32)s",
-    # [ *4( h16 ":" ) h16 ] "::"              ls32
-    "(?:(?:%(hex)s:){0,4}%(hex)s)?::%(ls32)s",
-    # [ *5( h16 ":" ) h16 ] "::"              h16
-    "(?:(?:%(hex)s:){0,5}%(hex)s)?::%(hex)s",
-    # [ *6( h16 ":" ) h16 ] "::"
-    "(?:(?:%(hex)s:){0,6}%(hex)s)?::",
-]
-
-UNRESERVED_PAT = r"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._\-~"
-IPV6_PAT = "(?:" + "|".join([x % _subs for x in _variations]) + ")"
-ZONE_ID_PAT = "(?:%25|%)(?:[" + UNRESERVED_PAT + "]|%[a-fA-F0-9]{2})+"
-IPV6_ADDRZ_PAT = r"\[" + IPV6_PAT + r"(?:" + ZONE_ID_PAT + r")?\]"
-REG_NAME_PAT = r"(?:[^\[\]%:/?#]|%[a-fA-F0-9]{2})*"
-TARGET_RE = re.compile(r"^(/[^?#]*)(?:\?([^#]*))?(?:#.*)?$")
-
-IPV4_RE = re.compile("^" + IPV4_PAT + "$")
-IPV6_RE = re.compile("^" + IPV6_PAT + "$")
-IPV6_ADDRZ_RE = re.compile("^" + IPV6_ADDRZ_PAT + "$")
-BRACELESS_IPV6_ADDRZ_RE = re.compile("^" + IPV6_ADDRZ_PAT[2:-2] + "$")
-ZONE_ID_RE = re.compile("(" + ZONE_ID_PAT + r")\]$")
-
-_HOST_PORT_PAT = ("^(%s|%s|%s)(?::0*?(|0|[1-9][0-9]{0,4}))?$") % (
-    REG_NAME_PAT,
-    IPV4_PAT,
-    IPV6_ADDRZ_PAT,
-)
-_HOST_PORT_RE = re.compile(_HOST_PORT_PAT, re.UNICODE | re.DOTALL)
-
-UNRESERVED_CHARS = set(
-    "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789._-~"
-)
-SUB_DELIM_CHARS = set("!$&'()*+,;=")
-USERINFO_CHARS = UNRESERVED_CHARS | SUB_DELIM_CHARS | {":"}
-PATH_CHARS = USERINFO_CHARS | {"@", "/"}
-QUERY_CHARS = FRAGMENT_CHARS = PATH_CHARS | {"?"}
-
-
-class Url(namedtuple("Url", url_attrs)):
-    """
-    Data structure for representing an HTTP URL. Used as a return value for
-    :func:`parse_url`. Both the scheme and host are normalized as they are
-    both case-insensitive according to RFC 3986.
-    """
-
-    __slots__ = ()
-
-    def __new__(
-        cls,
-        scheme=None,
-        auth=None,
-        host=None,
-        port=None,
-        path=None,
-        query=None,
-        fragment=None,
-    ):
-        if path and not path.startswith("/"):
-            path = "/" + path
-        if scheme is not None:
-            scheme = scheme.lower()
-        return super(Url, cls).__new__(
-            cls, scheme, auth, host, port, path, query, fragment
-        )
-
-    @property
-    def hostname(self):
-        """For backwards-compatibility with urlparse. We're nice like that."""
-        return self.host
-
-    @property
-    def request_uri(self):
-        """Absolute path including the query string."""
-        uri = self.path or "/"
-
-        if self.query is not None:
-            uri += "?" + self.query
-
-        return uri
-
-    @property
-    def netloc(self):
-        """Network location including host and port"""
-        if self.port:
-            return "%s:%d" % (self.host, self.port)
-        return self.host
-
-    @property
-    def url(self):
-        """
-        Convert self into a url
-
-        This function should more or less round-trip with :func:`.parse_url`. The
-        returned url may not be exactly the same as the url inputted to
-        :func:`.parse_url`, but it should be equivalent by the RFC (e.g., urls
-        with a blank port will have : removed).
-
-        Example: ::
-
-            >>> U = parse_url('http://google.com/mail/')
-            >>> U.url
-            'http://google.com/mail/'
-            >>> Url('http', 'username:password', 'host.com', 80,
-            ... '/path', 'query', 'fragment').url
-            'http://username:password@host.com:80/path?query#fragment'
-        """
-        scheme, auth, host, port, path, query, fragment = self
-        url = u""
-
-        # We use "is not None" we want things to happen with empty strings (or 0 port)
-        if scheme is not None:
-            url += scheme + u"://"
-        if auth is not None:
-            url += auth + u"@"
-        if host is not None:
-            url += host
-        if port is not None:
-            url += u":" + str(port)
-        if path is not None:
-            url += path
-        if query is not None:
-            url += u"?" + query
-        if fragment is not None:
-            url += u"#" + fragment
-
-        return url
-
-    def __str__(self):
-        return self.url
-
-
-def split_first(s, delims):
-    """
-    .. deprecated:: 1.25
-
-    Given a string and an iterable of delimiters, split on the first found
-    delimiter. Return two split parts and the matched delimiter.
-
-    If not found, then the first part is the full input string.
-
-    Example::
-
-        >>> split_first('foo/bar?baz', '?/=')
-        ('foo', 'bar?baz', '/')
-        >>> split_first('foo/bar?baz', '123')
-        ('foo/bar?baz', '', None)
-
-    Scales linearly with number of delims. Not ideal for large number of delims.
-    """
-    min_idx = None
-    min_delim = None
-    for d in delims:
-        idx = s.find(d)
-        if idx < 0:
-            continue
-
-        if min_idx is None or idx < min_idx:
-            min_idx = idx
-            min_delim = d
-
-    if min_idx is None or min_idx < 0:
-        return s, "", None
-
-    return s[:min_idx], s[min_idx + 1 :], min_delim
-
-
-def _encode_invalid_chars(component, allowed_chars, encoding="utf-8"):
-    """Percent-encodes a URI component without reapplying
-    onto an already percent-encoded component.
-    """
-    if component is None:
-        return component
-
-    component = six.ensure_text(component)
-
-    # Normalize existing percent-encoded bytes.
-    # Try to see if the component we're encoding is already percent-encoded
-    # so we can skip all '%' characters but still encode all others.
-    component, percent_encodings = PERCENT_RE.subn(
-        lambda match: match.group(0).upper(), component
-    )
-
-    uri_bytes = component.encode("utf-8", "surrogatepass")
-    is_percent_encoded = percent_encodings == uri_bytes.count(b"%")
-    encoded_component = bytearray()
-
-    for i in range(0, len(uri_bytes)):
-        # Will return a single character bytestring on both Python 2 & 3
-        byte = uri_bytes[i : i + 1]
-        byte_ord = ord(byte)
-        if (is_percent_encoded and byte == b"%") or (
-            byte_ord < 128 and byte.decode() in allowed_chars
-        ):
-            encoded_component += byte
-            continue
-        encoded_component.extend(b"%" + (hex(byte_ord)[2:].encode().zfill(2).upper()))
-
-    return encoded_component.decode(encoding)
-
-
-def _remove_path_dot_segments(path):
-    # See http://tools.ietf.org/html/rfc3986#section-5.2.4 for pseudo-code
-    segments = path.split("/")  # Turn the path into a list of segments
-    output = []  # Initialize the variable to use to store output
-
-    for segment in segments:
-        # '.' is the current directory, so ignore it, it is superfluous
-        if segment == ".":
-            continue
-        # Anything other than '..', should be appended to the output
-        elif segment != "..":
-            output.append(segment)
-        # In this case segment == '..', if we can, we should pop the last
-        # element
-        elif output:
-            output.pop()
-
-    # If the path starts with '/' and the output is empty or the first string
-    # is non-empty
-    if path.startswith("/") and (not output or output[0]):
-        output.insert(0, "")
-
-    # If the path starts with '/.' or '/..' ensure we add one more empty
-    # string to add a trailing '/'
-    if path.endswith(("/.", "/..")):
-        output.append("")
-
-    return "/".join(output)
-
-
-def _normalize_host(host, scheme):
-    if host:
-        if isinstance(host, six.binary_type):
-            host = six.ensure_str(host)
-
-        if scheme in NORMALIZABLE_SCHEMES:
-            is_ipv6 = IPV6_ADDRZ_RE.match(host)
-            if is_ipv6:
-                # IPv6 hosts of the form 'a::b%zone' are encoded in a URL as
-                # such per RFC 6874: 'a::b%25zone'. Unquote the ZoneID
-                # separator as necessary to return a valid RFC 4007 scoped IP.
-                match = ZONE_ID_RE.search(host)
-                if match:
-                    start, end = match.span(1)
-                    zone_id = host[start:end]
-
-                    if zone_id.startswith("%25") and zone_id != "%25":
-                        zone_id = zone_id[3:]
-                    else:
-                        zone_id = zone_id[1:]
-                    zone_id = "%" + _encode_invalid_chars(zone_id, UNRESERVED_CHARS)
-                    return host[:start].lower() + zone_id + host[end:]
-                else:
-                    return host.lower()
-            elif not IPV4_RE.match(host):
-                return six.ensure_str(
-                    b".".join([_idna_encode(label) for label in host.split(".")])
-                )
-    return host
-
-
-def _idna_encode(name):
-    if name and any(ord(x) >= 128 for x in name):
-        try:
-            from pip._vendor import idna
-        except ImportError:
-            six.raise_from(
-                LocationParseError("Unable to parse URL without the 'idna' module"),
-                None,
-            )
-        try:
-            return idna.encode(name.lower(), strict=True, std3_rules=True)
-        except idna.IDNAError:
-            six.raise_from(
-                LocationParseError(u"Name '%s' is not a valid IDNA label" % name), None
-            )
-    return name.lower().encode("ascii")
-
-
-def _encode_target(target):
-    """Percent-encodes a request target so that there are no invalid characters"""
-    path, query = TARGET_RE.match(target).groups()
-    target = _encode_invalid_chars(path, PATH_CHARS)
-    query = _encode_invalid_chars(query, QUERY_CHARS)
-    if query is not None:
-        target += "?" + query
-    return target
-
-
-def parse_url(url):
-    """
-    Given a url, return a parsed :class:`.Url` namedtuple. Best-effort is
-    performed to parse incomplete urls. Fields not provided will be None.
-    This parser is RFC 3986 and RFC 6874 compliant.
-
-    The parser logic and helper functions are based heavily on
-    work done in the ``rfc3986`` module.
-
-    :param str url: URL to parse into a :class:`.Url` namedtuple.
-
-    Partly backwards-compatible with :mod:`urlparse`.
-
-    Example::
-
-        >>> parse_url('http://google.com/mail/')
-        Url(scheme='http', host='google.com', port=None, path='/mail/', ...)
-        >>> parse_url('google.com:80')
-        Url(scheme=None, host='google.com', port=80, path=None, ...)
-        >>> parse_url('/foo?bar')
-        Url(scheme=None, host=None, port=None, path='/foo', query='bar', ...)
-    """
-    if not url:
-        # Empty
-        return Url()
-
-    source_url = url
-    if not SCHEME_RE.search(url):
-        url = "//" + url
-
-    try:
-        scheme, authority, path, query, fragment = URI_RE.match(url).groups()
-        normalize_uri = scheme is None or scheme.lower() in NORMALIZABLE_SCHEMES
-
-        if scheme:
-            scheme = scheme.lower()
-
-        if authority:
-            auth, _, host_port = authority.rpartition("@")
-            auth = auth or None
-            host, port = _HOST_PORT_RE.match(host_port).groups()
-            if auth and normalize_uri:
-                auth = _encode_invalid_chars(auth, USERINFO_CHARS)
-            if port == "":
-                port = None
-        else:
-            auth, host, port = None, None, None
-
-        if port is not None:
-            port = int(port)
-            if not (0 <= port <= 65535):
-                raise LocationParseError(url)
-
-        host = _normalize_host(host, scheme)
-
-        if normalize_uri and path:
-            path = _remove_path_dot_segments(path)
-            path = _encode_invalid_chars(path, PATH_CHARS)
-        if normalize_uri and query:
-            query = _encode_invalid_chars(query, QUERY_CHARS)
-        if normalize_uri and fragment:
-            fragment = _encode_invalid_chars(fragment, FRAGMENT_CHARS)
-
-    except (ValueError, AttributeError):
-        return six.raise_from(LocationParseError(source_url), None)
-
-    # For the sake of backwards compatibility we put empty
-    # string values for path if there are any defined values
-    # beyond the path in the URL.
-    # TODO: Remove this when we break backwards compatibility.
-    if not path:
-        if query is not None or fragment is not None:
-            path = ""
-        else:
-            path = None
-
-    # Ensure that each part of the URL is a `str` for
-    # backwards compatibility.
-    if isinstance(url, six.text_type):
-        ensure_func = six.ensure_text
-    else:
-        ensure_func = six.ensure_str
-
-    def ensure_type(x):
-        return x if x is None else ensure_func(x)
-
-    return Url(
-        scheme=ensure_type(scheme),
-        auth=ensure_type(auth),
-        host=ensure_type(host),
-        port=port,
-        path=ensure_type(path),
-        query=ensure_type(query),
-        fragment=ensure_type(fragment),
-    )
-
-
-def get_host(url):
-    """
-    Deprecated. Use :func:`parse_url` instead.
-    """
-    p = parse_url(url)
-    return p.scheme or "http", p.hostname, p.port

venv/Lib/site-packages/pip/_vendor/urllib3/util/wait.py

@@ -1,152 +0,0 @@
-import errno
-import select
-import sys
-from functools import partial
-
-try:
-    from time import monotonic
-except ImportError:
-    from time import time as monotonic
-
-__all__ = ["NoWayToWaitForSocketError", "wait_for_read", "wait_for_write"]
-
-
-class NoWayToWaitForSocketError(Exception):
-    pass
-
-
-# How should we wait on sockets?
-#
-# There are two types of APIs you can use for waiting on sockets: the fancy
-# modern stateful APIs like epoll/kqueue, and the older stateless APIs like
-# select/poll. The stateful APIs are more efficient when you have a lots of
-# sockets to keep track of, because you can set them up once and then use them
-# lots of times. But we only ever want to wait on a single socket at a time
-# and don't want to keep track of state, so the stateless APIs are actually
-# more efficient. So we want to use select() or poll().
-#
-# Now, how do we choose between select() and poll()? On traditional Unixes,
-# select() has a strange calling convention that makes it slow, or fail
-# altogether, for high-numbered file descriptors. The point of poll() is to fix
-# that, so on Unixes, we prefer poll().
-#
-# On Windows, there is no poll() (or at least Python doesn't provide a wrapper
-# for it), but that's OK, because on Windows, select() doesn't have this
-# strange calling convention; plain select() works fine.
-#
-# So: on Windows we use select(), and everywhere else we use poll(). We also
-# fall back to select() in case poll() is somehow broken or missing.
-
-if sys.version_info >= (3, 5):
-    # Modern Python, that retries syscalls by default
-    def _retry_on_intr(fn, timeout):
-        return fn(timeout)
-
-else:
-    # Old and broken Pythons.
-    def _retry_on_intr(fn, timeout):
-        if timeout is None:
-            deadline = float("inf")
-        else:
-            deadline = monotonic() + timeout
-
-        while True:
-            try:
-                return fn(timeout)
-            # OSError for 3 <= pyver < 3.5, select.error for pyver <= 2.7
-            except (OSError, select.error) as e:
-                # 'e.args[0]' incantation works for both OSError and select.error
-                if e.args[0] != errno.EINTR:
-                    raise
-                else:
-                    timeout = deadline - monotonic()
-                    if timeout < 0:
-                        timeout = 0
-                    if timeout == float("inf"):
-                        timeout = None
-                    continue
-
-
-def select_wait_for_socket(sock, read=False, write=False, timeout=None):
-    if not read and not write:
-        raise RuntimeError("must specify at least one of read=True, write=True")
-    rcheck = []
-    wcheck = []
-    if read:
-        rcheck.append(sock)
-    if write:
-        wcheck.append(sock)
-    # When doing a non-blocking connect, most systems signal success by
-    # marking the socket writable. Windows, though, signals success by marked
-    # it as "exceptional". We paper over the difference by checking the write
-    # sockets for both conditions. (The stdlib selectors module does the same
-    # thing.)
-    fn = partial(select.select, rcheck, wcheck, wcheck)
-    rready, wready, xready = _retry_on_intr(fn, timeout)
-    return bool(rready or wready or xready)
-
-
-def poll_wait_for_socket(sock, read=False, write=False, timeout=None):
-    if not read and not write:
-        raise RuntimeError("must specify at least one of read=True, write=True")
-    mask = 0
-    if read:
-        mask |= select.POLLIN
-    if write:
-        mask |= select.POLLOUT
-    poll_obj = select.poll()
-    poll_obj.register(sock, mask)
-
-    # For some reason, poll() takes timeout in milliseconds
-    def do_poll(t):
-        if t is not None:
-            t *= 1000
-        return poll_obj.poll(t)
-
-    return bool(_retry_on_intr(do_poll, timeout))
-
-
-def null_wait_for_socket(*args, **kwargs):
-    raise NoWayToWaitForSocketError("no select-equivalent available")
-
-
-def _have_working_poll():
-    # Apparently some systems have a select.poll that fails as soon as you try
-    # to use it, either due to strange configuration or broken monkeypatching
-    # from libraries like eventlet/greenlet.
-    try:
-        poll_obj = select.poll()
-        _retry_on_intr(poll_obj.poll, 0)
-    except (AttributeError, OSError):
-        return False
-    else:
-        return True
-
-
-def wait_for_socket(*args, **kwargs):
-    # We delay choosing which implementation to use until the first time we're
-    # called. We could do it at import time, but then we might make the wrong
-    # decision if someone goes wild with monkeypatching select.poll after
-    # we're imported.
-    global wait_for_socket
-    if _have_working_poll():
-        wait_for_socket = poll_wait_for_socket
-    elif hasattr(select, "select"):
-        wait_for_socket = select_wait_for_socket
-    else:  # Platform-specific: Appengine.
-        wait_for_socket = null_wait_for_socket
-    return wait_for_socket(*args, **kwargs)
-
-
-def wait_for_read(sock, timeout=None):
-    """Waits for reading to be available on a given socket.
-    Returns True if the socket is readable, or False if the timeout expired.
-    """
-    return wait_for_socket(sock, read=True, timeout=timeout)
-
-
-def wait_for_write(sock, timeout=None):
-    """Waits for writing to be available on a given socket.
-    Returns True if the socket is readable, or False if the timeout expired.
-    """
-    return wait_for_socket(sock, write=True, timeout=timeout)

venv/Lib/site-packages/pip/py.typed

@@ -1,4 +0,0 @@
-pip is a command line program. While it is implemented in Python, and so is
-available for import, you must not use pip's internal APIs in this way. Typing
-information is provided as a convenience only and is not a guarantee. Expect
-unannounced changes to the API and types in releases.

venv/Lib/site-packages/pygments/__init__.py

@@ -1,82 +0,0 @@
-"""
-    Pygments
-    ~~~~~~~~
-
-    Pygments is a syntax highlighting package written in Python.
-
-    It is a generic syntax highlighter for general use in all kinds of software
-    such as forum systems, wikis or other applications that need to prettify
-    source code. Highlights are:
-
-    * a wide range of common languages and markup formats is supported
-    * special attention is paid to details, increasing quality by a fair amount
-    * support for new languages and formats are added easily
-    * a number of output formats, presently HTML, LaTeX, RTF, SVG, all image
-      formats that PIL supports, and ANSI sequences
-    * it is usable as a command-line tool and as a library
-    * ... and it highlights even Brainfuck!
-
-    The `Pygments master branch`_ is installable with ``easy_install Pygments==dev``.
-
-    .. _Pygments master branch:
-       https://github.com/pygments/pygments/archive/master.zip#egg=Pygments-dev
-
-    :copyright: Copyright 2006-2025 by the Pygments team, see AUTHORS.
-    :license: BSD, see LICENSE for details.
-"""
-from io import StringIO, BytesIO
-
-__version__ = '2.19.2'
-__docformat__ = 'restructuredtext'
-
-__all__ = ['lex', 'format', 'highlight']
-
-
-def lex(code, lexer):
-    """
-    Lex `code` with the `lexer` (must be a `Lexer` instance)
-    and return an iterable of tokens. Currently, this only calls
-    `lexer.get_tokens()`.
-    """
-    try:
-        return lexer.get_tokens(code)
-    except TypeError:
-        # Heuristic to catch a common mistake.
-        from pygments.lexer import RegexLexer
-        if isinstance(lexer, type) and issubclass(lexer, RegexLexer):
-            raise TypeError('lex() argument must be a lexer instance, '
-                            'not a class')
-        raise
-
-
-def format(tokens, formatter, outfile=None):  # pylint: disable=redefined-builtin
-    """
-    Format ``tokens`` (an iterable of tokens) with the formatter ``formatter``
-    (a `Formatter` instance).
-
-    If ``outfile`` is given and a valid file object (an object with a
-    ``write`` method), the result will be written to it, otherwise it
-    is returned as a string.
-    """
-    try:
-        if not outfile:
-            realoutfile = getattr(formatter, 'encoding', None) and BytesIO() or StringIO()
-            formatter.format(tokens, realoutfile)
-            return realoutfile.getvalue()
-        else:
-            formatter.format(tokens, outfile)
-    except TypeError:
-        # Heuristic to catch a common mistake.
-        from pygments.formatter import Formatter
-        if isinstance(formatter, type) and issubclass(formatter, Formatter):
-            raise TypeError('format() argument must be a formatter instance, '
-                            'not a class')
-        raise
-
-
-def highlight(code, lexer, formatter, outfile=None):
-    """
-    This is the most high-level highlighting function. It combines `lex` and
-    `format` in one function.
-    """
-    return format(lex(code, lexer), formatter, outfile)

venv/Lib/site-packages/pygments/__main__.py

@@ -1,17 +0,0 @@
-"""
-    pygments.__main__
-    ~~~~~~~~~~~~~~~~~
-
-    Main entry point for ``python -m pygments``.
-
-    :copyright: Copyright 2006-2025 by the Pygments team, see AUTHORS.
-    :license: BSD, see LICENSE for details.
-"""
-
-import sys
-import pygments.cmdline
-
-try:
-    sys.exit(pygments.cmdline.main(sys.argv))
-except KeyboardInterrupt:
-    sys.exit(1)