QuLab 2.7.1__cp312-cp312-macosx_10_13_universal2.whl → 2.7.2__cp312-cp312-macosx_10_13_universal2.whl

{QuLab-2.7.1.dist-info → QuLab-2.7.2.dist-info}/METADATA

@@ -1,6 +1,6 @@
 Metadata-Version: 2.2
 Name: QuLab
-Version: 2.7.1
+Version: 2.7.2
 Summary: contral instruments and manage data
 Author-email: feihoo87 <feihoo87@gmail.com>
 Maintainer-email: feihoo87 <feihoo87@gmail.com>

{QuLab-2.7.1.dist-info → QuLab-2.7.2.dist-info}/RECORD

@@ -1,16 +1,17 @@
 qulab/__init__.py,sha256=tKRZe2WafDGcwbu7ddlMaePerN842aRbxcrECsu5pas,286
 qulab/__main__.py,sha256=fjaRSL_uUjNIzBGNgjlGswb9TJ2VD5qnkZHW3hItrD4,68
 qulab/dicttree.py,sha256=tRRMpGZYVOLw0TEByE3_2Ss8FdOmzuGL9e1DWbs8qoY,13684
-qulab/fun.cpython-312-darwin.so,sha256=NUkpb294CRAbb6Es1z5k6GB-1PlLhSTybEOHxs9Xf0E,126864
+qulab/fun.cpython-312-darwin.so,sha256=1U1JSuNJZ6CBFwfZSsxwHyQHGhZo6YgWkPNhRhtMkW4,126864
 qulab/typing.py,sha256=5xCLfrp1aZpKpDy4p2arbFszw2eK3hGUjZa-XSvC_-8,69
-qulab/version.py,sha256=xkoIKgoZcSSCvADR_B4d431s18gi1UBtQfoGreWgTWQ,21
+qulab/utils.py,sha256=JIXMSmZU0uYfKG_tzawpK7vRNPRir_hJE8JlqkVLX2o,1260
+qulab/version.py,sha256=JTqj-XIuRPWEFFyND2mJjBdnG93QHlAniTLmsmdDwwY,21
 qulab/cli/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
 qulab/cli/commands.py,sha256=tgDIkkeIoasQXAifJZ6NU8jDgpNgb2a-B0C4nF0evrE,559
 qulab/cli/config.py,sha256=SdNmWzweWAdyk8M2oKYhMxnkaJ0qIayPlsLGCNlVqME,3108
 qulab/executor/__init__.py,sha256=LosPzOMaljSZY1thy_Fxtbrgq7uubJszMABEB7oM7tU,101
 qulab/executor/cli.py,sha256=ZELMwczk_BKvEiVMQ280l4wcqakfeknvyMZzQKcv77E,8368
 qulab/executor/load.py,sha256=QKe2qs-kCPp0PjvnVMR5XVgSa1IkN5BSHkNPZ2EpC38,18007
-qulab/executor/schedule.py,sha256=5fAu1g1WLgZUWsLMENT0rrzMwfdRdHkGB86quwvMYc4,15216
+qulab/executor/schedule.py,sha256=YRAYs0PgR0mhhy4rJX8Ddi65peSfh7SfsvudVjLJQAU,15248
 qulab/executor/storage.py,sha256=-v7Yd1SrLa8Uy2JHHKFJN1Qp48PPgtWhHC7kcFdACLo,10546
 qulab/executor/transform.py,sha256=kaDJePBhVc32gZkQN8YBuA69lYYW9YhDZmCnUKaWuQw,2189
 qulab/executor/utils.py,sha256=XDk3duNrqDsCqZyZUmPqIAIIiykiafcOMBpy9NVAOAw,5686
@@ -93,9 +94,9 @@ qulab/visualization/plot_seq.py,sha256=UWTS6p9nfX_7B8ehcYo6UnSTUCjkBsNU9jiOeW2ca
 qulab/visualization/qdat.py,sha256=ZeevBYWkzbww4xZnsjHhw7wRorJCBzbG0iEu-XQB4EA,5735
 qulab/visualization/rot3d.py,sha256=lMrEJlRLwYe6NMBlGkKYpp_V9CTipOAuDy6QW_cQK00,734
 qulab/visualization/widgets.py,sha256=6KkiTyQ8J-ei70LbPQZAK35wjktY47w2IveOa682ftA,3180
-QuLab-2.7.1.dist-info/LICENSE,sha256=PRzIKxZtpQcH7whTG6Egvzl1A0BvnSf30tmR2X2KrpA,1065
-QuLab-2.7.1.dist-info/METADATA,sha256=MaQghSRdE-C8aBSWuq8Q19QPVvZcmdR1O4IbvufiE1M,3698
-QuLab-2.7.1.dist-info/WHEEL,sha256=iDXcyuxg-66TzzqHGH-kgw_HJdaJE_1RHznrvPNCSNs,115
-QuLab-2.7.1.dist-info/entry_points.txt,sha256=b0v1GXOwmxY-nCCsPN_rHZZvY9CtTbWqrGj8u1m8yHo,45
-QuLab-2.7.1.dist-info/top_level.txt,sha256=3T886LbAsbvjonu_TDdmgxKYUn939BVTRPxPl9r4cEg,6
-QuLab-2.7.1.dist-info/RECORD,,
+QuLab-2.7.2.dist-info/LICENSE,sha256=PRzIKxZtpQcH7whTG6Egvzl1A0BvnSf30tmR2X2KrpA,1065
+QuLab-2.7.2.dist-info/METADATA,sha256=fL6EocaNK32go_-ZLF5wwpG1ii30ZLJjnxUikw8UPhI,3698
+QuLab-2.7.2.dist-info/WHEEL,sha256=iDXcyuxg-66TzzqHGH-kgw_HJdaJE_1RHznrvPNCSNs,115
+QuLab-2.7.2.dist-info/entry_points.txt,sha256=b0v1GXOwmxY-nCCsPN_rHZZvY9CtTbWqrGj8u1m8yHo,45
+QuLab-2.7.2.dist-info/top_level.txt,sha256=3T886LbAsbvjonu_TDdmgxKYUn939BVTRPxPl9r4cEg,6
+QuLab-2.7.2.dist-info/RECORD,,

qulab/executor/schedule.py

@@ -47,7 +47,7 @@ def check_state(workflow: WorkflowType, code_path: str | Path,
     3. No dependencies have been recalibrated since the last time check data or calibrate was run on this cal.
     4. All dependencies pass check state.
     """
-    logger.debug(f'check_state: "{workflow}"')
+    logger.debug(f'check_state: "{workflow.__workflow_id__}"')
     result = find_result(workflow.__workflow_id__, state_path)
     if not result:
         logger.debug(
@@ -207,7 +207,7 @@ def check_data(workflow: WorkflowType, code_path: str | Path,
                         base_path=state_path)
         save_result(workflow.__workflow_id__, result, state_path)
 
-        logger.debug(f'Calibrated "{workflow}" !')
+        logger.debug(f'Calibrated "{workflow.__workflow_id__}" !')
         result = call_analyzer(workflow,
                                result,
                                history,

qulab/utils.py

@@ -0,0 +1,31 @@
+import subprocess
+import sys
+
+
+def run_detached_with_terminal(executable_path):
+    """
+    启动可执行文件并在新终端窗口中保持运行，Python退出后进程仍存在。
+    适用于Windows、Linux和macOS。
+    """
+    try:
+        if sys.platform == 'win32':
+            # Windows：使用start命令启动新cmd窗口
+            cmd = f'start cmd /k "{executable_path}"'
+            subprocess.Popen(cmd, shell=True)
+        elif sys.platform == 'darwin':
+            # macOS：通过AppleScript在Terminal中执行命令
+            escaped_path = executable_path.replace('"', r'\"')
+            script = f'tell application "Terminal" to do script "{escaped_path}"'
+            subprocess.Popen(['osascript', '-e', script],
+                             start_new_session=True)
+        else:
+            # Linux：尝试gnome-terminal或xterm
+            try:
+                subprocess.Popen(['gnome-terminal', '--', executable_path],
+                                 start_new_session=True)
+            except FileNotFoundError:
+                subprocess.Popen(['xterm', '-e', executable_path],
+                                 start_new_session=True)
+    except Exception as e:
+        print(f"启动失败: {e}")
+        sys.exit(1)

qulab/version.py

@@ -1 +1 @@
-__version__ = "2.7.1"
+__version__ = "2.7.2"