PySimultan 0.1.53__py3-none-any.whl → 0.2__py3-none-any.whl

PySimultan/resources/GeometryViewer.Data.xml

@@ -1,4443 +0,0 @@
-<?xml version="1.0"?>
-<doc>
-    <assembly>
-        <name>GeometryViewer.Data</name>
-    </assembly>
-    <members>
-        <member name="T:GeometryViewer.Algorithms.Geometric.OffsetSurfaceAlgorithms">
-            <summary>
-            Methods for working with/converting offset models
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.OffsetSurfaceAlgorithms.ConvertToModel(System.Collections.Generic.IEnumerable{GeometryViewer.Model.OffsetSurface.OffsetFace},System.Windows.Media.Media3D.Matrix3D,System.Double)">
-            <summary>
-            Converts a set of offset faces into a new geometry model. Holes are ignored.
-            Vertices and Edges are merged if they are at the same location after transformation.
-            Intersections are not handled.
-            </summary>
-            <param name="faces">The offset faces that should be converted</param>
-            <param name="transformation">An additional transformation which is applied to all vertices</param>
-            <param name="tolerance">Tolerance for merging vertices</param>
-            <returns>A geometry model containing all the faces</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.BaseGeometryAlgorithms">
-            <summary>
-            Provides methods that operate on BaseGeometries (on all types of Geometry)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.BaseGeometryAlgorithms.GetVertices(GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Returns a list of all vertices in a Geometry. Only supports Vertex, Edge, Face, Volume
-            </summary>
-            <param name="geometry">The geometry for which the vertices should be returned</param>
-            <returns>A list of all vertices in hte geometry</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms">
-            <summary>
-            Provides methods for detecting geometric properties in a model
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DetectXZFaces(GeometryViewer.Model.Geometry.GeometryModelData,System.Double)">
-            <summary>
-            Detects faces in the XZ plane
-            </summary>
-            <param name="model">The model</param>
-            <param name="tolerance">Calculation tolerance</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DetectXZFaces(GeometryViewer.Model.Geometry.GeometryModelData,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge},System.Double)">
-            <summary>
-            Detects faces in the XZ plane for a given set of edges
-            </summary>
-            <param name="model">The model</param>
-            <param name="edges">The edges</param>
-            <param name="tolerance">Calculation tolerance</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DetectFromVertexEdge(System.Collections.Generic.List{GeometryViewer.Model.Geometry.Vertex},System.Collections.Generic.List{GeometryViewer.Model.Geometry.Edge},GeometryViewer.Model.Geometry.GeometryModelData,System.Double)">
-            <summary>
-            Tries to find edges and faces from set of vertices and/or edges. All vertices have to be on one plane
-            </summary>
-            <param name="vertices">The vertices(can be null)</param>
-            <param name="edges">The edges (can be null)</param>
-            <param name="model">The model this vertices belong to</param>
-            <param name="tolerance">Calculation tolerance</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.BestFittingPlane(System.Collections.Generic.IEnumerable{System.Windows.Media.Media3D.Point3D})">
-            <summary>
-            Fits a plane through points in least square sense.
-            </summary>
-            <param name="points">Collection of 3D points to fit plane through</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DetectVolumes(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Tries to automatically detect and register volumes for a given geometry model.
-            </summary>
-            <param name="gm">GeometryModel to detect volumes in</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DirectionFromFaceAndEdge(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.PEdge)">
-            <summary>
-            Computes a direction vector along a face relative to a given edge.
-            </summary>
-            <param name="face">The final vector lies on the plane of this face</param>
-            <param name="edge">The final vector is orthogonal to this edge</param>
-            <returns>Normalized direction vector</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DetectFromFaces(System.Collections.Generic.List{GeometryViewer.Model.Geometry.Face},GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.Geometry.Layer,System.Double)">
-             <summary>
-             Tries to find a volume by connecting faces.
-            
-             Priority:
-             1. One face contains all others -> cut holes
-             2. Two faces with a common edge -> merge
-             3. faces form a closed hull -> create volume
-             4. 2 faces -> crate volume by connecting edges of the two faces
-             
-             </summary>
-             <param name="faces">The faces</param>
-             <param name="model">The model</param>
-             <param name="activeLayer">Layer in which new geometry is generated</param>
-             <param name="tolerance">Calculation tolerance</param>
-             <returns>True when the operation has found something to connect</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.DetectFacesFromEdges(System.Collections.Generic.List{GeometryViewer.Model.Geometry.Edge},GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Detects faces from a set of edges. First removes dangling edges, then tries to find one closed edge loop.
-            </summary>
-            <param name="edges">List of edges which could define a face</param>
-            <param name="model">The model into which the face should be generated</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.SignedAngle(System.Windows.Vector,System.Windows.Vector)">
-            <summary>
-            Computes the signed angle (in counter clockwise direction) between two vectors in 2D.
-            </summary>
-            <param name="v1">vector 1</param>
-            <param name="v2">vector 2</param>
-            <returns>Signed angle between two 2D vectors in the range [-pi, pi].</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.ShortAngleDist(System.Double,System.Double)">
-            <summary>
-            Computes the shortest distance between angles in degrees, i.e. distance is always less than 180°
-            https://gist.github.com/shaunlebron/8832585
-            </summary>
-            <param name="a0">First angle in degrees</param>
-            <param name="a1">Second angle in degrees</param>
-            <returns>Shortest distance between angles in degrees</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.DetectionAlgorithms.FindConnection(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.Face,System.Double,System.Collections.Generic.List{System.Double}@,System.Collections.Generic.List{System.Double}@)">
-            <summary>
-            Determines whether two faces can be connected.
-            Criterias:
-             - Same number of straight lines
-             - At least two edges with same direction when projecting f2 to f1
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms">
-            <summary>
-            Provides algorithms that operate on edges
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.IsSimilarEdge(GeometryViewer.Model.Geometry.Edge,GeometryViewer.Model.Geometry.Edge)">
-            <summary>
-            Determines whether two edges describe the same information
-            </summary>
-            <param name="e1">First edge</param>
-            <param name="e2">Second edge</param>
-            <returns>True when the two edges describe the same information, False otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.EdgePointIntersection(GeometryViewer.Model.Geometry.Edge,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Calculates the distance of the point to the line (d) and the line equation parameter of the closed point (t)
-            </summary>
-            <param name="e1">The edge</param>
-            <param name="p">The point</param>
-            <returns>Distance of the point to the line (d) and the line equation parameter of the closed point (t)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.EdgeEdgeIntersection(GeometryViewer.Model.Geometry.Edge,GeometryViewer.Model.Geometry.Edge,System.Double)">
-            <summary>
-            Calculates the intersection between two lines
-            </summary>
-            <param name="e1">First edge</param>
-            <param name="e2">Second edge</param>
-            <param name="endLineTolerance">Defines which region at start and end of lines are considered outside.
-            The line parameter t has to be in [tolerance, 1-tolerance] to be considered intersecting</param>
-            <returns>A bool indicating whether the two edges intersect and the line parameters t1 for e1 and t2 for e2</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.IsOnSameLine(GeometryViewer.Model.Geometry.Edge,GeometryViewer.Model.Geometry.Edge,System.Double)">
-            <summary>
-            Determines whether to edges are on the same line
-            </summary>
-            <param name="e1">First edge</param>
-            <param name="e2">Second edge</param>
-            <param name="tolerance">Accepted tolerance</param>
-            <returns>True when both edges are on the same line, False otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.Direction(GeometryViewer.Model.Geometry.PEdge)">
-            <summary>
-            Calculates the direction of a PEdge
-            </summary>
-            <param name="e">The edge</param>
-            <returns>The direction of the edge</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.Direction(GeometryViewer.Model.Geometry.Edge)">
-            <summary>
-            Returns the normalized direction of an edge. It is undefined which of the two possible directions is returned.
-            </summary>
-            <param name="e">The edge</param>
-            <returns>One of the two possible directions of the edge</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.ContainedGeometry(GeometryViewer.Model.Geometry.Edge,System.Collections.Generic.List{GeometryViewer.Model.Geometry.BaseGeometry}@)">
-            <summary>
-            Returns all the geometry contained in this edge (edge + vertices)
-            </summary>
-            <param name="e">The edge</param>
-            <param name="geometries">The resulting geometry list</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.OrderLoop(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Tries to order the edges such that they form a closed loop by following the edges.
-            </summary>
-            <param name="edges">The edges</param>
-            <returns>A bool indicating if the edges form a closed loop. The list contains the ordered edges or null when they don't form a loop.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.OrderLoop(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.PEdge})">
-            <summary>
-            Tries to order the pedges such that they form a closed loop by following the edges.
-            </summary>
-            <param name="edges">The PEdges</param>
-            <returns>A bool indicating if the edges form a closed loop. The list contains the ordered edges or null when they don't form a loop.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.OrderedPointLoop(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge},System.Windows.Media.Media3D.Matrix3D)">
-            <summary>
-            Orders a list of edges and returns an ordered list of corner points
-            </summary>
-            <param name="edges">The edges</param>
-            <param name="matrix">An optional mapping matrix. Only used to transform the resulting point list.</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.OrderedVertexLoop(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Orders a list of edges and returns an ordered list of vertices
-            </summary>
-            <param name="edges">The edges</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.EdgeEdgeIntersection2D(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Double)">
-            <summary>
-            Tests for Edge-Edge intersections in the 2D plane. Z is ignored
-            https://stackoverflow.com/questions/563198/how-do-you-detect-where-two-line-segments-intersect
-            </summary>
-            <param name="e0p0">First line first point</param>
-            <param name="e0p1">First line second point</param>
-            <param name="e1p0">Second line first point</param>
-            <param name="e1p1">Second line second point</param>
-            <param name="tolerance">Tolerance for calculations</param>
-            <returns>True when the two edges intersect, False otherwise.
-            t1 is intersection parameter along first line, t2 is intersection parameter along second line</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.ReplaceEdge(GeometryViewer.Model.Geometry.Edge,System.Collections.Generic.List{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Replaces an edges with multiple new edges (also handles parent geometry)
-            </summary>
-            <param name="original">Original edge</param>
-            <param name="replacements">List of edges that replace original</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.SplitEdge(GeometryViewer.Model.Geometry.Edge,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Splits an edge at a specific position
-            </summary>
-            <param name="e">The edge</param>
-            <param name="splitPosition">The position for the split (should be close to the line)</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeAlgorithms.IsConnectedEdge(GeometryViewer.Model.Geometry.Edge,GeometryViewer.Model.Geometry.Edge)">
-            <summary>
-            Returns whether two given edges are connected
-            </summary>
-            <param name="e1">Edge 1</param>
-            <param name="e2">Edge 2</param>
-            <returns>true if edges share a vertex</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms">
-            <summary>
-            Provides algorithms that work on EdgeLoop instances
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.NormalCCW(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Calculates the normal of an EdgeLoop.
-            <para>The method assumes that the EdgeLoop describes a planar surface and is oriented counter clockwise</para>
-            When no normal could be found (or NaN/Inf is generated during calculation), this methods returns (0,0,0).
-            </summary>
-            <param name="loop">The EdgeLoop to operate on</param>
-            <returns>The normal vector</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.NormalCCW(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D})">
-            <summary>
-            Calculates the normal of an EdgeLoop given as a set of points.
-            <para>The method assumes that the EdgeLoop describes a planar surface and is oriented counter clockwise</para>
-            When no normal could be found (or NaN/Inf is generated during calculation), this methods returns (0,0,0).
-            </summary>
-            <param name="edgeLoopPositions">The set of positions in the EdgeLoop to operate on</param>
-            <returns>The normal vector</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.StraightEdgeCount(GeometryViewer.Model.Geometry.EdgeLoop,System.Double)">
-            <summary>
-            Returns the number of straight lines in a loop. Basically combines consecutive edges with the same direction.
-            </summary>
-            <param name="loop">The loop</param>
-            <param name="tolerance">Calculation tolerance</param>
-            <returns>The number of straight lines</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.IsSimilar(GeometryViewer.Model.Geometry.EdgeLoop,GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Determines if two edgeloops are similar. Similar means that they contain the same Edges
-            </summary>
-            <param name="loop1">First edge</param>
-            <param name="loop2">Second edge</param>
-            <returns>True when the loops are similar, False otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Area(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Calculates the area of a EdgeLoop
-            </summary>
-            <param name="loop">The loop</param>
-            <returns>The area (always positive)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Area(System.Collections.Generic.IEnumerable{System.Windows.Media.Media3D.Point3D})">
-            <summary>
-            Calculates the area of a EdgeLoop
-            </summary>
-            <param name="boundary">A list of boundary points</param>
-            <returns>The area (always positive)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Size(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Returns the estimated size of the loop. For floor/ceiling loops, the direction of the axis can vary.
-            </summary>
-            <param name="loop"></param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.HeightMinMax(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Returns the minimum and maximum Y value of all vertices in the loop
-            </summary>
-            <param name="loop">The edgeloop</param>
-            <returns>Minimum and maximum Y value of all vertices</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Flip(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Flips an edge loop
-            </summary>
-            <param name="loop">The edge loop</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Contains(GeometryViewer.Model.Geometry.EdgeLoop,System.Windows.Media.Media3D.Point3D,System.Double,System.Double)">
-            <summary>
-            Tests if an edge-loop contains a point
-            </summary>
-            <param name="l">The loop</param>
-            <param name="v">The point</param>
-            <param name="tolerance">Tolerance to edges</param>
-            <param name="zTolerance">Tolerance between point and the plane spanned by the edgeloop</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.LoopToXYMapping(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Calculates the mapping of a EdgeLoop into the XY plane
-            </summary>
-            <param name="loop"></param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Contains2D(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Windows.Media.Media3D.Point3D,System.Double,System.Double)">
-            <summary>
-            Tests if a point lies inside a polygon.
-            This method assumes that the polygon lies in the XY plane.
-            </summary>
-            http://geomalgorithms.com/a03-_inclusion.html
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Perimeter(GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Calculates the perimeter of an EdgeLoop.
-            Sums up the length of all edges
-            </summary>
-            <param name="loop">The loop</param>
-            <returns>The perimeter length</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.EdgeLoopAlgorithms.Perimeter(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D})">
-            <summary>
-            Calculates the perimeter of an EdgeLoop (given as polygon corners).
-            Sums up the length of all edges
-            </summary>
-            <param name="polygon">The polygon</param>
-            <returns>The perimeter length</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeometricRelation">
-            <summary>
-            Enumeration for describing geometric realtions for intersection tests
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeometricRelation.Contained">
-            <summary>
-            Fully contained
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeometricRelation.Intersecting">
-            <summary>
-            Intersecting
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeometricRelation.None">
-            <summary>
-            No intersection, not contained
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.FaceAlgorithms">
-            <summary>
-            Provides algorithms that operate on Face instances
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Triangulate(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Segments a PFace into triangles. Orientation is derived from the PFace.Orientation property.
-            </summary>
-            <param name="face">The face to triangulate</param>
-            <param name="orientation">Orientation of the face</param>
-            <returns>A tuple containing positions, normals and indices for the triangulation.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Triangulate(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Collections.Generic.IEnumerable{System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D}},System.Windows.Media.Media3D.Vector3D,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Triangulates a list of boundary vertices and holes
-            </summary>
-            <param name="boundary">The boundary</param>
-            <param name="holes">List of holes</param>
-            <param name="normal">The face normal</param>
-            <param name="orientation">Orientation of the face (winding order)</param>
-            <returns>A tuple containing position, normal and indices for the triangulation.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.TriangulateBoundary(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Windows.Media.Media3D.Vector3D,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Triangulates a face, leaving away all holes
-            </summary>
-            <param name="boundary">Boundary vertex positions</param>
-            <param name="normal">The face normal</param>
-            <param name="orientation">Orientation of the face (winding order)</param>
-            <returns>A tuple containing position, normal and indices for the triangulation.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.TriangulateBoundary(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Triangulates a face, leaving away all holes
-            </summary>
-            <param name="face">The face</param>
-            <param name="orientation">Orientation of the face</param>
-            <returns>A tuple containing position, normal and indices for the triangulation.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.TriangulateBoundary(GeometryViewer.Model.Geometry.PFace)">
-            <summary>
-            Triangulates a face, leaving away all holes
-            </summary>
-            <param name="face">The face</param>
-            <returns>A tuple containing position, normal and indices for the triangulation.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.FaceToXZMapping(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Returns a matrix that maps the face into the XZ plane
-            </summary>
-            <param name="face">The face which should be mapped</param>
-            <param name="orientation">Defines which side of the Face will point upwards</param>
-            <returns>A rotation matrix</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.FaceToXYMapping(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Returns a matrix that maps the face into the XY plane
-            </summary>
-            <param name="face">The face which should be mapped</param>
-            <param name="orientation">Defines which side of the Face will point upwards</param>
-            <returns>A rotation matrix</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.XYSize(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Determines the size of the face in it's embedding plane
-            This function maps the face in the XY plane and then calculates the size there.
-            </summary>
-            <param name="face">The face</param>
-            <returns>The size</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Center(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Calculates the center of the face (center means geometric average)
-            </summary>
-            <param name="face">The face</param>
-            <returns>The center</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.ContainedGeometry(GeometryViewer.Model.Geometry.Face,System.Collections.Generic.List{GeometryViewer.Model.Geometry.BaseGeometry}@)">
-            <summary>
-            Returns all the geometry contained in this edge (faces + edge + vertices)
-            </summary>
-            <param name="f">The face</param>
-            <param name="geometries">The resulting geometry list</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Contains(GeometryViewer.Model.Geometry.Face,System.Windows.Media.Media3D.Point3D,System.Double,System.Double)">
-            <summary>
-            Checks whether a face contains a point
-            </summary>
-            <param name="f">The face</param>
-            <param name="v">The point</param>
-            <param name="tolerance">Tolerance towards the boundary</param>
-            <param name="zTolerance">Tolerance to the plane spanned by the face</param>
-            <returns>Contained when point is inside polygon, None otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Contains2D(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.Edge,System.Double,System.Double)">
-            <summary>
-            Checks whether a face contains or intersects an edge
-            </summary>
-            <param name="f">The face</param>
-            <param name="e">The edge</param>
-            <param name="tolerance">Tolerance towards the boundary</param>
-            <param name="zTolerance">Tolerance to the plane spanned by the face</param>
-            <returns>Contained when the edge is fully contained in the polygon, Intersecting when the edge intersects the polygon boundary, None otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Contains2D(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.Face,System.Double,System.Double)">
-            <summary>
-            Checks whether a face contains or intersects another face
-            </summary>
-            <param name="fouter">The container face</param>
-            <param name="f">The containing face</param>
-            <param name="tolerance">Tolerance towards the boundary</param>
-            <param name="zTolerance">Tolerance to the plane spanned by the face</param>
-            <returns>Contained when the face is fully contained in the polygon, Intersecting when the face intersects the polygon, None otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.HessianPlane(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Calculates the hessian form of the plane spanned by a face
-            </summary>
-            <param name="f">The face</param>
-            <returns>The hessian form</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsSamePlane(System.ValueTuple{System.Windows.Media.Media3D.Vector3D,System.Double},System.ValueTuple{System.Windows.Media.Media3D.Vector3D,System.Double},System.Double,System.Double)">
-            <summary>
-            Tests whether two hessian forms are similar
-            </summary>
-            <param name="plane1">First plane</param>
-            <param name="plane2">Second plane</param>
-            <param name="angleTolerance">Tolerance (angular)</param>
-            <param name="distanceTolerance">Tolerance (distance)</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Area(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Calculates the area of a face (Area of the boundary minus area of holes)
-            The method produces wrong results when holes are not fully contained in the face or when holes overlap
-            </summary>
-            <param name="f">The face</param>
-            <returns>The area of the face</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.AreaMinMax(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Returns the minimum and maximum area of the offset surfaces as well as the area of the reference surface
-            </summary>
-            <param name="f">The face</param>
-            <returns>The area of the reference surface (area), the minimum area of the offset surfaces (offsetAreaMin) 
-            and maximum area or the offset surfaces (offsetAreaMax)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.AreaInnerOuter(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Calculates the area of the face, the area of the inner offset surface and the area of the outer offset surface
-            </summary>
-            <param name="f">The face</param>
-            <returns>area: Area of the reference geometry, innerArea: Area of the inner offset surface, outerArea: Area of the outer offset surface</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Size(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Returns a size estimate for the face. For floor/ceiling faces the direction of the used axis can vary
-            </summary>
-            <param name="f"></param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.HeightMinMax(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Returns the minimum and maximum Y value of all vertices in a face
-            </summary>
-            <param name="f">The Face</param>
-            <returns>Minimum and maximum Y value of all vertices</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsFloorOrCeiling(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Returns whether this surface is a floor or ceiling polygon
-            </summary>
-            <param name="f">The face</param>
-            <returns>True when this face belongs to floor or ceiling.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsFloor(GeometryViewer.Model.Geometry.PFace)">
-            <summary>
-            Returns whether this surface is a floor polygon (Slope smaller than MaxAngleForFloor, normal pointing upwards)
-            </summary>
-            <param name="f">The face</param>
-            <returns>True when this face belongs to the floor.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsFloor(System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Returns whether a surface with this normal is a floor polygon (Slope smaller than MaxAngleForFloor, normal pointing upwards)
-            </summary>
-            <param name="normal">The face normal</param>
-            <returns>True when this face belongs to the floor.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsCeiling(GeometryViewer.Model.Geometry.PFace)">
-            <summary>
-            Returns whether this surface is a ceiling polygon (Slope smaller than MaxAngleForCeiling, normal pointing downwards)
-            </summary>
-            <param name="f">The face</param>
-            <returns>True when this face belongs to the ceiling.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsCeiling(System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Returns whether a surface with this normal is a ceiling polygon (Slope smaller than MaxAngleForCeiling, normal pointing downwards)
-            </summary>
-            <param name="normal">The face normal</param>
-            <returns>True when this face belongs to the ceiling.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.IsClosedHull(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Face})">
-            <summary>
-            Tests whether the faces form a closed hull (not taking openings into account)
-            </summary>
-            <param name="faces">A list of faces to test</param>
-            <returns>True when the faces form a closed hull</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.FindCommonVolume(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Face},GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Tries to find a volume which contains all faces
-            </summary>
-            <param name="faces">The list of faces</param>
-            <param name="model">The model to search in</param>
-            <returns>A volume that contains all faces, or null when no such volume exists</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Halfspace(GeometryViewer.Model.Geometry.Face,System.Collections.Generic.IEnumerable{System.Windows.Media.Media3D.Point3D},System.Double)">
-            <summary>
-            Determines whether a set of points lies completely on one side of the plane
-            </summary>
-            <param name="face">The face that defines the plane</param>
-            <param name="points">The list of points to test</param>
-            <param name="tolerance">Points in this distance to the plane are excluded from test</param>
-            <returns>Forward or Backward when the points are completely on one side, Undefined when the are located on both sides</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.Perimeter(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Calculates the perimeter of the face. Sums the parimeter of the bounding and all holes.
-            DOES NOT HANDLE DUPLICATES EDGES (E.G. WHEN TWO HOLES INTERSECT OR WHEN A HOLE INTERSECTS THE BOUNDARY)
-            </summary>
-            <param name="f">The face</param>
-            <returns>The perimeter lenth</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.SplitFace(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Splits a face such that all openenings can be handles as adjacent faces.
-            When no openings are present, nothing happens
-            </summary>
-            <param name="f">The face to split</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.OrientationIncline(GeometryViewer.Model.Geometry.PFace,System.Double)">
-            <summary>
-            Returns the incline (angle to up vector) and the orientation (angle to north=[0,0,1]) of a face in radians
-            </summary>
-            <param name="pface">The face</param>
-            <param name="tolerance">Tolerance for calculations</param>
-            <returns>
-                Incline: Between -PI/2 and PI/2. 0 for vertical walls, -PI/2 for horizontal floors, PI/2 for horizontal ceilings 
-                Orientation: Angle in the xz-plane of the face normal to the north direction [0,0,1]. 0 when the face is horizontal (|incline| == 90).
-            </returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.FaceAlgorithms.OrientationIncline(System.Windows.Media.Media3D.Vector3D,System.Double)">
-            <summary>
-            Returns the incline (angle to up vector) and the orientation (angle to north=[0,0,1]) of a face normal in radians
-            </summary>
-            <param name="normal">The face normal</param>
-            <param name="tolerance">Tolerance for calculations</param>
-            <returns>
-                Incline: Between -PI/2 and PI/2. 0 for vertical walls, -PI/2 for horizontal floors, PI/2 for horizontal ceilings 
-                Orientation: Angle in the xz-plane of the face normal to the north direction [0,0,1]. 0 when the face is horizontal (|incline| == 90).
-            </returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeometryAlgorithms">
-            <summary>
-            Provides general algorithms for geometries (intersections, closest points, ...)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryAlgorithms.LineLineDistance(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Calculates the shortest distance between two lines (rays)
-            </summary>
-            <param name="l0Origin">Point on the first line</param>
-            <param name="l0Direction">Direction of the first line</param>
-            <param name="l1Origin">Point on the second line</param>
-            <param name="l1Direction">Direction of the second line</param>
-            <returns>The shortest distance between the two lines. </returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryAlgorithms.LineSegmentDistance(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Calculates the shortest distance between a line and a line segment
-            </summary>
-            <param name="segmentP0">Start point of the segment</param>
-            <param name="segmentP1">End point of the segment</param>
-            <param name="rayOrigin">Point on the line</param>
-            <param name="rayDirection">Direction of the line</param>
-            <returns>The shortest distance between a line and a segment</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryAlgorithms.LineSegmentClosesPoint(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Calculates the points with the minimum distance between a line and a segment
-            </summary>
-            <param name="segmentP0">Start point of the segment</param>
-            <param name="segmentP1">End point of the segment</param>
-            <param name="rayOrigin">Point on the line</param>
-            <param name="rayDirection">Direction of the line</param>
-            <returns>segmentPoint: Point on the segment, rayPoint: Point on the line</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryAlgorithms.LineLineClosestPoint(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Calculates the points with the minimum distance between two lines
-            </summary>
-            <param name="l0Origin">Point on the first line</param>
-            <param name="l0Direction">Direction of the first line</param>
-            <param name="l1Origin">Point on the second line</param>
-            <param name="l1Direction">Direction of the second line</param>
-            <returns>l0Point: Point on the first line, l0Param: line parameter of l1Point, l1Param: Same for second line</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.ModelInconsistentException">
-            <summary>
-            Exception when GeometryModel is inconsistent
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelInconsistentException.#ctor(System.String)">
-            <summary>
-            Constructor
-            </summary>
-            <param name="msg">Exception message</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms">
-            <summary>
-            Provides algorithms that operate on the whole GeometryModel
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.SetAllVisibility(GeometryViewer.Model.Geometry.GeometryModelData,System.Boolean)">
-            <summary>
-            Sets the visibility of all contained elements
-            </summary>
-            <param name="model">The model</param>
-            <param name="isVisible">The new visibility value</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.GetAllAffectedGeometries(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Returns all geometries that are either a parent or a child of the initialGeometry
-            </summary>
-            <param name="initialGeometry">The initial geometry</param>
-            <returns>A list of all geometries that are affected by change to the initial geometry</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.GetAllAffectedGeometries(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Vertex})">
-            <summary>
-            Returns all geometries that are either a parent or a child of the initialGeometry
-            </summary>
-            <param name="initialGeometry">The initial geometry</param>
-            <returns>A list of all geometries that are affected by change to the initial geometry</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.GetAllContainingGeometries(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Gets a list of all geometries that depend on the initialGeometry
-            </summary>
-            <param name="initialGeometry">The initial geometry</param>
-            <returns>A list of all "parent" geometries (geometries that depend on the initial geometry)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.GetAllVisibleGeometries(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Returns a list of all visible geometries from a model (only Vertices, Edges, Faces and Volumes)
-            </summary>
-            <param name="model">The geometry model</param>
-            <returns>A list of all visible geometries from a model (only Vertices, Edges, Faces and Volumes)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.Boundary(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.GeometryModelData},System.Boolean)">
-            <summary>
-            Calculates a 3D axis aligned bound box around the models
-            </summary>
-            <param name="models">List of geometry models that should be contained in the bounding box</param>
-            <param name="includeInvisible">Set to true when currently invisible geometry should be included</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.Boundary(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry},System.Boolean)">
-            <summary>
-            Calculates a 3D axis aligned bound box around some geometry objects
-            </summary>
-            <param name="geometry">List of geometry objects that should be contained in the bounding box</param>
-            <param name="includeInvisible">Set to true when currently invisible geometry should be included</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.CheckConsistency(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Checks if the model is in a consistent state. Tests whether all sub-geometries are also part of the model.
-            Throws a ModelInconsistentException when not in a consistent state.
-            </summary>
-            <param name="model">The model to check</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.UpdateGeometryModelWithExistingIds(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Computes the union of 2 geometry models to sustain existing IDs and adds everything else from newGeometryModel 
-            (returns union(ogm, ngm) + diff(ngm, union(ogm, ngm)))
-            </summary>
-            <param name="oldGeometryModel">Old model which gets updated with new geometry from newGeometryModel</param>
-            <param name="newGeometryModel">GeometryModel with new changes which are copied to oldGeometryModel</param>
-            <param name="outGeometryModel">The GeometryModel to which the data is added</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeometryModelAlgorithms.CopyContent(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.Geometry.GeometryModelData,System.Boolean)">
-            <summary>
-            Creates a deep copy of the from model in the to model
-            </summary>
-            <param name="from">The source model</param>
-            <param name="to">The target model</param>
-            <param name="preserveIds">When set to True, the ids are kept. Only works when the ids are not used in the to model.</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms">
-            <summary>
-            Provides algorithms for working with GeoReferences
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord">
-            <summary>
-            Class that stores a single coordinate in UTM format
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord.Zone">
-            <summary>
-            Zone, must be in [1, 60]
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord.NorthernHemisphere">
-            <summary>
-            Flag whether point is on northern hemisphere
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord.Easting">
-            <summary>
-            Easting
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord.Northing">
-            <summary>
-             Northing
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord.Height">
-            <summary>
-            Height in meter
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint">
-            <summary>
-            Class for representing a georeferenced point in 3D
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint.OS">
-            <summary>
-            Point in object space
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint.WGS">
-            <summary>
-            Point in WGS84 space (long/lat/height)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint.#ctor(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Initializes a new instance of the class GeoRefPoint
-            </summary>
-            <param name="OS">Position in object space</param>
-            <param name="WGS">Position in WGS84 space (long/lat/height)</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform">
-            <summary>
-            Holds all parameters necessary to interpolate the WGS84 coordinates for an unreferenced point in object space
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform.RefOrigin">
-            <summary>
-            Origin of coordinate system used to interpolate and transform
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform.RefP1">
-            <summary>
-            First point (in tangent direction) of coordinate system used to interpolate and transform
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform.RefP2">
-            <summary>
-            Second point (in bitangent direction) of coordinate system used to interpolate and transform
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform.Azimuth1">
-            <summary>
-            Azimuth of direction between origin and P1
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform.Azimuth2">
-            <summary>
-            Azimuth of direction between origin and P2
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefTransform.#ctor(GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint,GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint,GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint)">
-            <summary>
-            Initializes a new instance of class GeoRefTransform and computes intrinsic parameters
-            </summary>
-            <param name="origin">Origin of the coordinate system</param>
-            <param name="P1">First point (along tangent) of the coordinate system</param>
-            <param name="P2">Second point (along bitangent) of the coordinate system</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.InvalidGeoReferencingException">
-            <summary>
-            Exception that is thrown when the georeferencing of an object is invalid, i.e. if ValidatieGeoReferences(..) returns false
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.InvalidGeoReferencingException.#ctor">
-            <summary>
-            Creates a new instance of this class
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.FindBestGeoReferences(System.Collections.Generic.List{GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint},System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            This searches for the best georeferences to form a 2D coordinate system (3 points) used for interpolation.
-            Criteria are: axis are close to orthogonal, points span a wide distance, area covered by triangle is maximal
-            </summary>
-            <param name="geoReferences">List of georeferences to search</param>
-            <param name="pOS">Point in object space to find transformation for</param>
-            <returns>Transformation used for interpolation of WGS84 coordinates</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.ValidateGeoReferences(System.Collections.Generic.List{GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint})">
-            <summary>
-            Validates list of georeferenced points.
-            Criteria are: at least 3, not all points collinear in object and WGS space 
-            (also implicitly considers distance between points => should not be too close together)
-            </summary>
-            <param name="geoReferences">List of georeferenced points</param>
-            <returns>true, if given georeferences are suitable for interpolation of WGS84 coordinates, i.e. building can be placed in world space</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoReferenceMesh(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Collections.Generic.List{GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint})">
-            <summary>
-            Transforms given list of points into the WGS84 reference system based on a set of valid georeferenced points (use ValidateGeoReferences first).
-            WGS84 coordinates for non-georeferenced points are interpolated/extrapolated non-linearly - see EstimateWGSNonLinear.
-            Throws an InvalidGeoReferencingException if geoReferences are invalid
-            </summary>
-            <param name="positions">List of points to geo-reference.</param>
-            <param name="geoReferences">List of known georeferences</param>
-            <returns>Transformed list of points in Cartesian WGS84 space. Transformed list of points in WGS84 space (longitude/latitude/height).</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.EstimateWGSNonLinear(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Collections.Generic.List{GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.GeoRefPoint})">
-            <summary>
-            Given a set of georeferences and a set of points, each point gets assigned a WGS84 coordinate.
-            Points which are already referenced keep their respective georeference. 
-            Points directly above or below other points are garantueed to have the same long/lat coords.
-            Other points are interpolated/extrapolated in a non-linear fashion given as:
-            A 2D coordinate system (3 points) meeting certain criteria (see FindBestGeoReferences) is computed for each non-georeferenced point.
-            The 2D coordinate system is used to calculate angles between its axes and the current point relative to the 
-            referenced origin in object space. This angle is used to interpolate linearly between the azimuth of the 2 
-            chosen directions. Eventually, the interpolated azimuth in combination with the distance in object space (in meter) is used 
-            to obtain the new WGS84 coordinates using Vincenty's direct formulae.
-            </summary>
-            <param name="positions">List of positions to assign WGS84 coordinates to</param>
-            <param name="geoReferences">List of known georeferenced points</param>
-            <returns>Georeferenced points (WGS84) in same order as in given point list. </returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.WGS84ToCart(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Transforms a point with WGS coordinates into the cartesian coordinate system of the WGS reference ellipsoid.
-            https://gssc.esa.int/navipedia/index.php/Ellipsoidal_and_Cartesian_Coordinates_Conversion
-            https://en.wikipedia.org/wiki/World_Geodetic_System
-            </summary>
-            <param name="p">A point consisting of longitude (x), latitude (y) and height relative to surface (z)</param>
-            <returns>The point in the cartesian coordinate system of the WGS reference ellipsoid.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.CartToWGS84(System.Windows.Media.Media3D.Point3D,System.Double)">
-            <summary>
-            Transforms a point with cartesian coordinates into the WGS coordinate system.
-            https://gssc.esa.int/navipedia/index.php/Ellipsoidal_and_Cartesian_Coordinates_Conversion
-            https://en.wikipedia.org/wiki/World_Geodetic_System
-            </summary>
-            <param name="point">A point in the catesian space with [0,0,0] being the earths center.</param>
-            <param name="precision">The precision of the calculation.</param>
-            <returns>The point in the WGS coordinate system.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.TangentFrame(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Computes the tangent frame on the WGS84 ellipsoid in Cartesian coordinates for a given positions in WGS coordinates
-            </summary>
-            <param name="p">WGS coordinates of point</param>
-            <returns>Tangent frame (tangent, bitangent, normal) for given point</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.VincentyDirect(System.Windows.Media.Media3D.Point3D,System.Double,System.Double,System.Double,System.Int32)">
-            <summary>
-            Vincenty's direct formula to walk along a given amount in a given direction to obtain a new point lying on the WGS reference ellipsoid.
-            https://en.wikipedia.org/wiki/Vincenty%27s_formulae
-            </summary>
-            <param name="p">Start point with longitude (x), latitude (y) and height in m (z)</param>
-            <param name="azimuth">Direction to walk into given as an angle in degrees relative to the north pole [0,360)</param>
-            <param name="distance">Distance in meters to walk</param>
-            <param name="tolerance">Tolerance for the iterative algorithm. Default is 1e-12.</param>
-            <param name="maxIterations">Max iterations used as fallback if tolerance cannot be reached to prevent infinite loops.</param>
-            <returns>A point (longitude/latitude) which has a geodesic distance to the start point equal to the given input distance and it's final bearing (azimuth). 
-            Note, that this point has the same height as the input point.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.VincentyIndirect(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Double)">
-            <summary>
-            Vincenty's indirect formula to compute the geodesic distance and azimuth between two given WGS84 coordinate pairs.
-            https://en.wikipedia.org/wiki/Vincenty%27s_formulae
-            </summary>
-            <param name="source">Start point with longitude (x), latitude (y) and height in m (z)</param>
-            <param name="dest">End point with with longitude (x), latitude (y) and height in m (z)</param>
-            <param name="tolerance">Tolerance for the iterative algorithm. Default is 1e-12.</param>
-            <returns>Geodesic distance between the two given points as well as it's final bearing (azimuth in [0, 360)).</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.ConvertUTMToWGS84(GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.UTMCoord)">
-            <summary>
-            Converts UTM coordinates to WGS84 coordinates. Height is simply copied from UTM to WGS84.
-            https://www.movable-type.co.uk/scripts/latlong-utm-mgrs.html
-            Transverse Mercator with an accuracy of a few nanometers, Karney 2011
-            </summary>
-            <param name="utm">UTM coordinates</param>
-            <returns>WGS84 coordinates</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.CreateAlignedWGSGrid(System.Windows.Media.Media3D.Point3D,System.Double,System.Double,System.Double,System.Double,System.Boolean)">
-            <summary>
-            Creates a grid that is algined along the longitude(x)/latitude(y) axes.
-            The grid is centered around midPoint and spans the area [widthInM, heightInM] with grid lines inserted every spacingX/spacingY meters.
-            If spacing does not fit an integer times into any dimension, the resulting grid is cropped to floor(dim/spacing) in the respective dimension.
-            </summary>
-            <param name="midPoint">Center point in WGS coordinates</param>
-            <param name="widthInM">Total width of the grid in meters</param>
-            <param name="heightInM">Total height </param>
-            <param name="spacingX"></param>
-            <param name="spacingY"></param>
-            <param name="toCartesian">if true, WGS coordinates are converted into Cartesian coordinates</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.GeoReferenceAlgorithms.Atanh(System.Double)">
-            <summary>
-            Computes the arctangent hyperbolicus using its logarithm form.
-            </summary>
-            <param name="X">Parameter</param>
-            <returns>atanh(x)</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.LayerAlgorithms">
-            <summary>
-            Provides methods for working with layers
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.LayerAlgorithms.DeleteLayerAndContent(GeometryViewer.Model.Geometry.Layer)">
-            <summary>
-            Deletes the layer and it's content
-            </summary>
-            <param name="layer">The layer to delete</param>
-            <returns>A list of undo items for this operation</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms">
-            <summary>
-            Provides algorithms to clean up a mesh
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDuplicateVertices(GeometryViewer.Model.Geometry.GeometryModelData,System.Double,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes duplicate vertices by merging vertices which are closer than a given tolerance.
-            </summary>
-            <param name="model">The mode to clean up</param>
-            <param name="tolerance">The distance below which Vertices are merged</param>
-            <param name="vertexGrid">Speedup structure containing all vertices</param>
-            <param name="edgeGrid">Speedup structure containing all edges</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDuplicateEdges(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes duplicate edges by merging edges together
-            </summary>
-            <param name="model">The model</param>
-            <param name="edgeGrid">Speedup structure containing all edges</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDuplicateFaces(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes faces with similar edgeloops
-            </summary>
-            <param name="model">The model to check</param>
-            <param name="faceGrid">Speedup structure containing all faces</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDuplicateHoles(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes duplicate holes
-            </summary>
-            <param name="model">The GeometryModel</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDuplicateHoleLoops(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes holesloops which have a similar loop in a face boundary (happens when copying hole faces into existing holes)
-            </summary>
-            <param name="model">The GeometryModel</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDuplicateVolumes(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes duplicate volumes from a model.
-            Duplicate volumes are volumes that have the exact same set of faces.
-            </summary>
-            <param name="model">The geometry model</param>
-            <param name="backgroundInfo">A background worker info. May be Null when no background worker exists</param>
-            <param name="volumeGrid">The grid used to handle volumes</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveDegeneratedFaces(GeometryViewer.Model.Geometry.GeometryModelData,System.Double,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Removes faces with 0 size
-            </summary>
-            <param name="model">The model in which the faces should be removed</param>
-            <param name="areaTolerance">Minimum area below which faces are considered degenerated</param>
-            <param name="faceGrid">Speedup structure containing all faces</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.SplitEdgeEdgeIntersections(GeometryViewer.Model.Geometry.GeometryModelData,System.Double,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Handles Edge-Edge intersection (in one point) and overlapping edges
-            </summary>
-            <param name="model">The model</param>
-            <param name="tolerance">Tolerance for the calculation</param>
-            <param name="edgeGrid">Speedup structure containing all edges</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.SplitEdgeVertexIntersections(GeometryViewer.Model.Geometry.GeometryModelData,System.Double,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Handles vertices that are placed on an edge
-            </summary>
-            <param name="model">The model</param>
-            <param name="tolerance">The calculation tolerance</param>
-            <param name="vertexGrid">Speedup structure containing all vertices</param>
-            <param name="edgeGrid">Speedup structure containing all edges</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.SplitFaces(GeometryViewer.Model.Geometry.GeometryModelData,System.Double,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Splits overlapping faces
-            </summary>
-            <param name="model">The model</param>
-            <param name="tolerance">The calculation tolerance</param>
-            <param name="vertexGrid">Speedup structure containing all vertices</param>
-            <param name="faceGrid">Speedup structure containing all faces</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.SplitContainedFaces(GeometryViewer.Model.Geometry.GeometryModelData,System.Double,GeometryViewer.Model.SpatialStructures.AABBGrid@,GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo)">
-            <summary>
-            Adds faces that are completely contained in another faces as opening
-            </summary>
-            <param name="model">The model</param>
-            <param name="tolerance">The calculation tolerance</param>
-            <param name="faceGrid">Speedup structure containing all faces</param>
-            <param name="backgroundInfo">The background algorithm info for this task</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.ModelCleanupAlgorithms.RemoveErrorLayerIfEmpty(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Removes the error layer when there are no elements on it
-            </summary>
-            <param name="model">The model from which the error layer should be removed</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.PolylineAlgorithms">
-            <summary>
-            Provides algorithms for working with polylines
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.PolylineAlgorithms.Order(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.PEdge})">
-            <summary>
-            Tries to return an ordered list of edges
-            </summary>
-            <param name="edges">The input (unsorted) edges</param>
-            <returns>A bool indicating whether the edge list forms a polyline and a list of edges ordered along the polyline</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.PolylineAlgorithms.GetStartEnd(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Returns the start and the end of a polyline described by a set of edges. Sets isConnected to False when the edges do not form polyline
-            or describe a closed loop
-            </summary>
-            <param name="edges">The edges</param>
-            <returns>
-            	isConnected == True when the edges form a single polyline, otherwise False
-            	startVertex, endVertex the start and end of the polyline. Only valid when isConnected equals True
-            </returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.Triangulation">
-            <summary>
-            Provides methods to triangulate a polygon (with holes)
-            </summary>
-            <remarks>There is a updated version present in the old geometry viewer project which has to be ported</remarks>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.Triangulation.PolygonComplexFill(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Collections.Generic.List{System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D}},System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D}@,System.Collections.Generic.List{System.Int32}@,System.Boolean)">
-            <summary>
-            Segments a polygon in the XZ plane into triangles
-            </summary>
-            <param name="polygon">A list of points describing the boundary of the polygon</param>
-            <param name="holes">A list containing holes</param>
-            <param name="positions">Returns the positions of the triangulated polygon</param>
-            <param name="indices">Returns the indices of the triangulation</param>
-            <param name="reverse">When set to true all Point3D list are read back-to-front</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.Triangulation.DecomposeInSimplePolygons(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Collections.Generic.List{System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D}})">
-            <summary>
-            Returns a list of polygons that cover the polygon but have no holes.
-            </summary>
-            <param name="polygon">The original polygon</param>
-            <param name="holes">A list of hole polygons</param>
-            <returns></returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.HoleCycleDetector">
-            <summary>
-            For detecting cycles in the connecting lines between a polygon and the holes contained in it.
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.INVALID_INDEX">
-            <summary>
-            A reserved integer to indicate invalid indices.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.AllNodes">
-            <summary>
-            A look-up table for all nodes - i.e. the ones representing holes and the one representing the polygon.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.#ctor(System.Int32,System.Boolean)">
-            <summary>
-            Initializes the hole cycle detector and its root node.
-            </summary>
-            <param name="nr_of_holes">the number of holes in the polygon</param>
-            <param name="verbose">if true, generate debug console output</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.AddConnectingLine(System.ValueTuple{System.Int32,System.Int32,System.Int32,System.Int32})">
-            <summary>
-            Adds a connecting line w/o performing any tests.
-            </summary>
-            <param name="connecting_line">the connecting line</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.RemoveConnectingLine(System.ValueTuple{System.Int32,System.Int32,System.Int32,System.Int32})">
-            <summary>
-            Removes a connecting line.
-            </summary>
-            <param name="connecting_line">the connecting line</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.GetAllHolesConnectedToOnlyOneOtherHoleInclIndirection">
-            <summary>
-            Gets all holes that have to pass through a bottleneck of only one other hole in order to reach the outer polygon.
-            </summary>
-            <returns>true if such holes were found; in addition - a list of holes needing additional connections</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleDetector.FindFirstCommonElement(System.Collections.Generic.IEnumerable{System.Collections.Generic.List{System.Int32}},System.Int32,System.Int32)">
-            <summary>
-            Gets the common element in the given paths. Excluded from those are the index -1, indicating the outer poygon, and the given excluded index.
-            </summary>
-            <param name="paths">all paths to check</param>
-            <param name="excluded">the index to exclude, generally the index of the hole itself that occupies the start of each path</param>
-            <param name="invalid_element">the value to return in case no common element was found</param>
-            <returns>the furst common element, or the ibvalid element if there was no common element</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.HoleCycleNode">
-            <summary>
-            Represents a connected hole in the context of the search for connecting lines between 
-            an outer polygon and the holes contained in it.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.HoleCycleNode.Index">
-            <summary>
-            Representing the hole
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.HoleCycleNode.Connected2Nnodes">
-            <summary>
-            Representing the nodes reachable via the respective connecting lines.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Geometric.HoleCycleNode.Nodes">
-            <summary>
-            Represent the unique nodes this one is conected to, and the number of times this node is connected to them.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleNode.#ctor(System.Int32,System.Boolean)">
-            <summary>
-            Initializes a node with a specific index.
-            </summary>
-            <param name="index">the hole index, -1 indicates the outer polygon</param>
-            <param name="verbose">if true, print the debug output to the console</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleNode.Connect(System.ValueTuple{System.Int32,System.Int32,System.Int32,System.Int32},GeometryViewer.Algorithms.Geometric.HoleCycleNode)">
-            <summary>
-            Adds a connnection to another node.
-            </summary>
-            <param name="connection">the connecting line</param>
-            <param name="node">the node</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleNode.Disconnect(System.ValueTuple{System.Int32,System.Int32,System.Int32,System.Int32},GeometryViewer.Algorithms.Geometric.HoleCycleNode)">
-            <summary>
-            Removes an existing connection to a node.
-            </summary>
-            <param name="connection">the connecting line</param>
-            <param name="node">the node</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleNode.TraverseAndTest(System.Collections.Generic.List{System.ValueTuple{System.Int32,System.Int32,System.Int32,System.Int32}},System.Collections.Generic.List{System.ValueTuple{System.Int32,System.Int32,System.Int32}},System.String)">
-            <summary>
-            Searches for a cycle containing only holes and docking only at one point in any of the holes.
-            NOT IN USE !!!
-            </summary>
-            <param name="used_connections">the connecting lines used in the evaluation</param>
-            <param name="used_stops">the used points on the holes</param>
-            <param name="debug">the indent for the debug output</param>
-            <returns>the found cycles</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleNode.BFSwCutoff(System.Int32)">
-            <summary>
-            Breadth-First search for all paths starting at this node and ending at the outer polygon or at this node again
-            with a cut-off after reaching the outer polygon a given number of times.
-            </summary>
-            <param name="after_reaching_the_outside_n_times">the number of times to reach the outer polygon</param>
-            <returns>each found path separately</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.HoleCycleNode.ToString">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.VertexAlgorithms">
-            <summary>
-            Provides functions which operate on single points or vertices
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.FromMathematicalCoordinateSystem(System.Double,System.Double,System.Double)">
-            <summary>
-            Converts a point from a mathematically correct coordinate system (z = up) to a coordinate system used in computer graphics (y = up).
-            i.e. it performs a 90° rotation around the x-axis
-            </summary>
-            <param name="x">x coordinate</param>
-            <param name="y">y coordinate</param>
-            <param name="z">z coordinate</param>
-            <returns>Point in computer graphics coordinate system (y = up)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.FromMathematicalCoordinateSystem(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Converts a point from a mathematically correct coordinate system (z = up) to a coordinate system used in computer graphics (y = up).
-            i.e. it performs a 90° rotation around the
-            </summary>
-            <param name="p">Point in mathematical coordinate system (z = up)</param>
-            <returns>Point in computer graphics coordinate system (y = up)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.FromMathematicalCoordinateSystem(GeometryViewer.Model.Geometry.Vertex)">
-            <summary>
-            Converts a point from a mathematically correct coordinate system (z = up) to a coordinate system used in computer graphics (y = up).
-            i.e. it performs a 90° rotation around the
-            </summary>
-            <param name="v">Vertex in mathematical coordinate system (z = up)</param>
-            <returns>Point in computer graphics coordinate system (y = up)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.ToMathematicalCoordinateSystem(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Converts a point from rendering coordinate system (y = up) to a mathematically correct coordinate system (z = up).
-            </summary>
-            <param name="p">Vertex in rendering system (y = up)</param>
-            <returns>Point in mathematically correct coordinate system (z = up)</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.IsCollinear(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Double)">
-            <summary>
-            Checks if a given set of points is collinear i.e. lies on the same line.
-            </summary>
-            <param name="positions">Set of positions</param>
-            <param name="threshold">Threshold to detect collinearity (maximum distance of a point from the shared line, max 1), default 1e-10</param>
-            <returns>true, if points lie on the same line</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.IsCollinear(System.Collections.Generic.List{GeometryViewer.Model.Geometry.Vertex},System.Double)">
-            <summary>
-            Checks if a given set of points is collinear i.e. lies on the same line.
-            </summary>
-            <param name="vertices">Set of vertices</param>
-            <param name="threshold">Threshold to detect collinearity, default 1e-10</param>
-            <returns>true, if points lie on the same line</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.IsEqual(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Double)">
-            <summary>
-            Checks if all coordinates in 2 given points are equal within a small threshold.
-            </summary>
-            <param name="p1">First point</param>
-            <param name="p2">Second point</param>
-            <param name="threshold">Maximum allowed difference of coordinates</param>
-            <returns>true, if points are equal</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VertexAlgorithms.BoundingBox(System.Collections.Generic.IEnumerable{System.Windows.Media.Media3D.Point3D})">
-            <summary>
-            Calculates the minimum and maximum (axis aligned bounding box) of a set of points along each axis
-            </summary>
-            <param name="points">The list of points</param>
-            <returns>The minimum and maximum along each axis</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms">
-            <summary>
-            Provides algorithms operation on Volume instances
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.FindConsistentOrientation(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Finds a consistent orientation by adjusting PFace.Orientation
-            </summary>
-            <param name="volume">The volume to operate on</param>
-            <returns>True when a consistent volume was found, False when no consistent volume is found</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.FindUnclosedEdges(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Returns all edges where a volume is not closed properly (either because there is only one adjacent face, 
-            or because there are more than two adjacent faces)
-            </summary>
-            <param name="volume">The volume for which edges are checked</param>
-            <returns>All edges where the volume is not closed</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.Center(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Calculates the center (3D average) of a volume
-            </summary>
-            <param name="v">The volume</param>
-            <returns>The center</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.ContainedGeometry(GeometryViewer.Model.Geometry.Volume,System.Collections.Generic.List{GeometryViewer.Model.Geometry.BaseGeometry}@)">
-            <summary>
-            Returns all the geometry contained in this edge (volume + faces + edge + vertices)
-            </summary>
-            <param name="v">The volume</param>
-            <param name="geometries">The resulting geometry list</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.MergeVolumes(GeometryViewer.Model.Geometry.Volume,GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Merges two volumes that share a common surface. (Second volume gets deleted)
-            </summary>
-            <param name="v1">First volume</param>
-            <param name="v2">Second volume</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.RemoveFacesFromVolume(GeometryViewer.Model.Geometry.Volume,System.Collections.Generic.List{GeometryViewer.Model.Geometry.Face})">
-            <summary>
-            Removes faces from a volume. The volume might become inconsistent afterwards
-            </summary>
-            <param name="v">The volume where the faces should be removed</param>
-            <param name="faces">The faces to remove</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.AddFacesToVolume(GeometryViewer.Model.Geometry.Volume,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Face})">
-            <summary>
-            Adds faces from a volume. The volume might become inconsistent afterwards
-            </summary>
-            <param name="v">The volume where the faces should be added</param>
-            <param name="faces">The faces to add</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.Volume(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Calculates the volume of a volume
-            </summary>
-            <param name="vol">The volume to calculate the volume from</param>
-            <returns>The volume of the volume</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.SignedVolume(System.Collections.Generic.List{System.ValueTuple{GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.GeometricOrientation}})">
-            <summary>
-            Computes the signed volume of a list of faces
-            </summary>
-            <param name="faces">List of faces. Must not be closed.</param>
-            <returns>Signed volume from face list</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.VolumeBruttoNetto(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Returns the brutto and the netto volume
-            </summary>
-            <param name="vol">The volume</param>
-            <returns>The brutto and netto volume as given by the offset surfaces</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.Height(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Returns the minimum and maximum height of a volume
-            </summary>
-            <param name="vol">The volume</param>
-            <returns>The minimum and maximum height differnce between floor and ceiling</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.AreaBruttoNetto(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Calculates the area of the floor for the reference geometry, as well as for net and gross offsets.
-            AREABRUTTO IS ALWAYS double.NaN as it is still unclear how to calculate it.
-            </summary>
-            <param name="volume">The volume</param>
-            <returns>
-            areaReference: Area of the reference geometry of the floor,
-            areaBrutto: Always double.NaN
-            areaNetto: Net area (inner area) of the floor
-            </returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.Elevation(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Calculates absolute elevations for upper floor surfaces (Fussbodenoberkante) and lowest ceiling surface (Deckenunterkante)
-            </summary>
-            <param name="volume">The volume</param>
-            <returns>
-            floor: Highest point on the floor
-            ceiling: Lowest point on the ceiling
-            </returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.ElevationReference(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Calculates absolute elevations of the reference geometry
-            </summary>
-            <param name="volume">The volume</param>
-            <returns>
-            floor: Average height of the floor reference geometry
-            ceiling: Average height of the ceiling reference geometry
-            </returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Geometric.VolumeAlgorithms.FloorPerimeter(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Calculates the perimeter of the floor.
-            Sums up the perimeter sizes of all floor faces.
-            DOES NOT HANDLE DUPLICATE EDGES (E.G. WHEN TWO FLOOR POLYGONS INTERSECT)
-            </summary>
-            <param name="volume">The floor</param>
-            <returns>The perimeter length of the floor.</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Importing.AssimpGeometryImporter">
-            <summary>
-            An Importer for generic meshes unsing the Assimp Library.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Importing.AssimpGeometryImporter.Instance">
-            <summary>
-            Provides an Instance to this class.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.AssimpGeometryImporter.Import(System.String)">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Importing.GeometryImporterCache">
-            <summary>
-            A class used to cache the results of geometry import operations.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterCache.#ctor">
-            <summary>
-            Creates a new GeometryImporterCache instance.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterCache.TryGetCachedImportedGeometry(System.IO.FileInfo)">
-            <summary>
-            Tries to retrieve the cached value import result of the provided file.
-            Return null if there is no cached version or if the file changed.
-            </summary>
-            <param name="file">The file to retrieve the results for.</param>
-            <returns>The cached import result or null if there is no cache entry or if the entry is dirty and needs reimporting.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterCache.CacheImportedGeometry(System.IO.FileInfo,GeometryViewer.Algorithms.Importing.GeometryImporterResult)">
-            <summary>
-            Adds the import result of a specified file to the cache.
-            If the entry is already present it is overridden.
-            </summary>
-            <param name="file">The file to create the entry for.</param>
-            <param name="geometry">The import result of the file.</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Importing.GeometryImporterCache.CacheItem">
-            <summary>
-            Cache entry data model.
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Importing.GeometryImporterResult">
-            <summary>
-            Result of an GeometryImporter Import operation.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Importing.GeometryImporterResult.Vertices">
-            <summary>
-            The vertices of the imported model.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Importing.GeometryImporterResult.Normals">
-            <summary>
-            The normals of the imported model.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Importing.GeometryImporterResult.Indices">
-            <summary>
-            The indices of the imported model.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterResult.#ctor">
-            <summary>
-            Creates a new GeometryImporterResult with empty vertex/normal/index lists.
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Importing.GeometryImporterException">
-            <summary>
-            Gets thrown if an error happens while importing a geometry file.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterException.#ctor">
-            <summary>
-            Creates an instance of this Exception with a default message.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterException.#ctor(System.String)">
-            <summary>
-            Creates an instance of this Exception with the provided message.
-            <paramref name="message">The message of the exception</paramref>
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.GeometryImporterException.#ctor(System.String,System.Exception)">
-            <summary>
-            Creates an instance of this Exception with the provided message and inner exception.
-            <paramref name="message">The message of the exception</paramref>
-            <paramref name="innerException">The inner exception</paramref>
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Importing.IGeometryImporter">
-            <summary>
-            Interface for a geometry importer.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Importing.IGeometryImporter.Import(System.String)">
-            <summary>
-            Loads and parses the the model file at the given path and returns its contents.
-            Throws a FileNotFoundException if the file could not be found.
-            Throws a GeometryImporterException if an error occurred while loading the file.
-            </summary>
-            <param name="path">Path to the model file.</param>
-            <returns>A GeometryImporterResult containing the parsed model informations.</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Generation.DummyOffsetSurfaceGenerator">
-            <summary>
-            Very fast offset surface generation. Just offsets the face into the required direction.
-            Does not close corners/edges to adjacent faces
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.DummyOffsetSurfaceGenerator.Update(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Updates the offset mesh (on the full mesh)
-            </summary>
-            <param name="model">The geometry model to update</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.DummyOffsetSurfaceGenerator.Update(GeometryViewer.Model.Geometry.GeometryModelData,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Performs an partial update to the offset mesh
-            </summary>
-            <param name="model">The geometry model</param>
-            <param name="invalidatedGeometry">The geometry that should be updated (only Faces in this list are considered)</param>
-            <returns>A list of faces that have been modified</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Generation.ImprovedOffsetSurfaceGenerator">
-            <summary>
-            Improved offset generator
-            Uses a heuristic based solve on each vertex
-            </summary>
-            
-            -- Details --
-            
-            --- Exterior Faces ---
-             For each exterior face (0 or 1 PFace) run around boundary vertices.
-             For each vertex find all adjacent faces. Calculate orientation and if there is a shared edge between the current face and the adjacent one
-             This gives a number of directions and offsets
-             Try to find three linear independed directions
-             - Case 1: Only one direction -> return that direction
-             - Case 2: Two directions -> add a third direction perpendicular to the first two with offset 0
-             - Case 3: Three directions -> solve equation system
-               - Test all directions/offsets against that solution
-               
-             Special cases:
-             A: Two parallel faces with different offset
-              - Solution: Remove faces parallel to the current face from search space (happens anyway because they are not lin.indep.)
-             B: Four directions with conflicting offsets
-              - Solution: If no solution to the equation system exists, remove all faces without shared edge, try to solve again
-              
-            Revisions:
-            Rev2: Try to only take one face per adjacent pedge (hopefully excludes wrong offsets in T-junctions
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ImprovedOffsetSurfaceGenerator.Update(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Updates the offset mesh
-            </summary>
-            <param name="model">The model</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ImprovedOffsetSurfaceGenerator.Update(GeometryViewer.Model.Geometry.GeometryModelData,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Performs a partial update on the offset mesh
-            </summary>
-            <param name="model">The offset model</param>
-            <param name="invalidatedGeometry">The invalidated geometry (only Faces are taken into account)</param>
-            <returns>A list of all modified faces</returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Generation.OffsetAlgorithm">
-            <summary>
-            Enumeration with different algorithms for offset surface generation
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Generation.OffsetAlgorithm.Full">
-            <summary>
-            Uses the best available algorithm
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Generation.OffsetAlgorithm.Fast">
-            <summary>
-            Uses a algorithm that is as fast as possible
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Algorithms.Generation.OffsetAlgorithm.Disabled">
-            <summary>
-            Do not perform any offset calculations
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Generation.OffsetSurfaceGenerator">
-            <summary>
-            Generates offset surfaces and handles switching between different algorithms
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Algorithms.Generation.OffsetSurfaceGenerator.Algorithm">
-            <summary>
-            The algorithm used for updates
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.OffsetSurfaceGenerator.#ctor(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Initializes a new instance of the OffsetSurfaceGenerator class
-            </summary>
-            <param name="model">The geometry model</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.OffsetSurfaceGenerator.Update(System.Boolean)">
-            <summary>
-            Performs a complete offset model recalculation
-            </summary>
-            <param name="calculateSurfaces">True for normal recalcuation, False to prevent calculations</param>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.OffsetSurfaceGenerator.Update(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry},System.Boolean)">
-            <summary>
-            Performs a partial offset surface recalculation
-            </summary>
-            <param name="invalidatedGeometry">List of geoemtry that has to be recalculated</param>
-            <param name="calculateSurfaces">True for normal recalcuation, False to prevent calculations</param>
-            <returns></returns>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Generation.ProxyShapeGenerator">
-            <summary>
-            Algorithms for creating predefined proxy shapes
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ProxyShapeGenerator.UpdateCube(GeometryViewer.Model.Geometry.ProxyGeometry,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Updates the geoemtry data of a proxy geometry to a cube
-            </summary>
-            <param name="proxy">The proxy geometry that should be updated.</param>
-            <param name="size">Size of the cube geometry (NOT: size of the proxy. This size is used to calculate vertex coordinates)</param>
-            <returns>A proxygeometry containing a cube</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ProxyShapeGenerator.GenerateCube(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Vertex,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Generates a proxy geometry cube
-            </summary>
-            <param name="layer">Layer on which the cube is placed</param>
-            <param name="baseVertex">Vertex to which the cube should be attached</param>
-            <param name="size">Size of the cube geometry (NOT: size of the proxy. This size is used to calculate vertex coordinates)</param>
-            <returns>A proxygeometry containing a cube</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ProxyShapeGenerator.LoadModel(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Vertex,System.String,System.Collections.Generic.Dictionary{System.String,GeometryViewer.Algorithms.Importing.GeometryImporterResult})">
-            <summary>
-            Loads any 3D scene file that is supported by the Assimp library and returns it as a proxy geometry.
-            All scene meshes will be combined into a single mesh.
-            </summary>
-            <param name="layer">Layer on which the model is placed</param>
-            <param name="baseVertex">Vertex to which the model should be attached</param>
-            <param name="path">The path to the model file.</param>
-            <param name="cache">A cache for the geometry data. Before the geometry is imported from file the cache is checked if it already contains the data.</param>
-            <returns>A proxygeometry containing the imported model.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ProxyShapeGenerator.LoadModelsCombined(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Vertex,System.Collections.Generic.IEnumerable{System.IO.FileInfo},GeometryViewer.IO.IGeometryModelStore)">
-            <summary>
-            Loads a list of meshes and combines them into a single proxy geometry.
-            </summary>
-            <param name="layer">Layer on which the model is placed</param>
-            <param name="baseVertex">Vertex to which the model should be attached</param>
-            <param name="paths">A List of file paths to the meshes that should be combined.</param>
-            <param name="modelStore">A IGeometryModelStore used to cache the imported results. Before the geometry is imported from file the cache is checked if it already contains the data.</param>
-            <returns>A proxygeometry containing the imported models.</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ProxyShapeGenerator.UpdateProxyGeometryCombined(GeometryViewer.Model.Geometry.ProxyGeometry,System.Collections.Generic.IEnumerable{System.IO.FileInfo},GeometryViewer.IO.IGeometryModelStore)">
-            <summary>
-            Updates the geoemtry data of a proxy with the combined meshes of the provided mesh list.
-            </summary>
-            <param name="proxy">The proxy geometry that should be updated.</param>
-            <param name="paths">A List of file paths to the meshes that should be combined.</param>
-            <param name="modelStore">ModelStore used as cache for the geometry data. Before the geometry is imported from file the cache is checked if it already contains the data.</param>
-        </member>
-        <member name="T:GeometryViewer.Algorithms.Generation.ShapeGenerator">
-            <summary>
-            Provides methods for generating shape geometries
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ShapeGenerator.GenerateCube(GeometryViewer.Model.Geometry.Layer,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Generates a cube volume
-            </summary>
-            <param name="layer">The layer in which the cube should be placed</param>
-            <param name="position">Position of the center of the cube</param>
-            <param name="size">Length of the sides of the cube</param>
-            <returns>A volume containing edges and vertices that for a cube</returns>
-        </member>
-        <member name="M:GeometryViewer.Algorithms.Generation.ShapeGenerator.GenerateXZRectangle(GeometryViewer.Model.Geometry.Layer,System.Windows.Media.Media3D.Point3D,System.Windows.Size)">
-            <summary>
-            Generates a new rectangle in the XZ-plane
-            </summary>
-            <param name="layer">Layer on which the object should be placed</param>
-            <param name="position">Position of one corner</param>
-            <param name="size">Size of the rectangle (width along x-axis, height along z-axis)</param>
-            <returns></returns>
-        </member>
-        <member name="T:GeometryViewer.IO.ILoaderGeometryViewerInstance">
-            <summary>
-            Interface used by the SimGeoIO to communicate with the ILoaderGeometryExchange
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.IO.ILoaderGeometryViewerInstance.LoaderGeometryExchange">
-            <summary>
-            The ILoaderGeometryExchange of this instance
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.IO.GeometryModelEventArgs">
-            <summary>
-            EventArgs for the GeometryModelAdded and GeometryModelRemoved event
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.IO.GeometryModelEventArgs.Model">
-            <summary>
-            The GeometryModel which was added/removed
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.IO.GeometryModelEventArgs.#ctor(GeometryViewer.Model.GeometryModel)">
-            <summary>
-            Initializes a new instance of the GeometryModelEventArgs class
-            </summary>
-            <param name="model">The affected model</param>
-        </member>
-        <member name="T:GeometryViewer.IO.IGeometryModelStore">
-            <summary>
-            Interface for a class that manages geometry models.
-            Implementations have to make sure that only one GeometryModel exists for a given File
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.IO.IGeometryModelStore.Models">
-            <summary>
-            A list of all Models in this store
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.IO.IGeometryModelStore.GeometryModelAdded">
-            <summary>
-            Invoked when a GeometryModel has been added to the store
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.IO.IGeometryModelStore.GeometryModelRemoved">
-            <summary>
-            Invoked when a GeometryModel has been removed from the store
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.TryGetGeometryModel(System.Guid,GeometryViewer.Model.GeometryModel@,System.Boolean)">
-            <summary>
-            Tries to find a GeometryModel with a given id
-            </summary>
-            <param name="id">The id to search for</param>
-            <param name="model">Returns the model when one exists</param>
-            <param name="isOwning">
-            When set to true, the reference counter for this model is increased by one.
-            A model requested with isOwning == true has to be freed by calling RemoveGeometryModel
-            </param>
-            <returns>True when a model with this id exists, otherwise False</returns>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.TryGetGeometryModel(System.IO.FileInfo,GeometryViewer.Model.GeometryModel@,System.Boolean)">
-            <summary>
-            Tries to find a GeometryModel from a given file
-            </summary>
-            <param name="file">The file to search for</param>
-            <param name="model">Returns the model when one exists</param>
-            <param name="isOwning">
-            When set to true, the reference counter for this model is increased by one.
-            A model requested with isOwning == true has to be freed by calling RemoveGeometryModel
-            </param>
-            <returns>True when a model with this file exists, otherwise False</returns>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.AddGeometryModel(GeometryViewer.Model.GeometryModel)">
-            <summary>
-            Registers a new GeometryModel to the store
-            </summary>
-            <param name="model">The new model</param>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.RemoveGeometryModel(GeometryViewer.Model.GeometryModel)">
-            <summary>
-            Removes a GeometryModel from the store. Only frees the model when this has been the last reference to the model.
-            </summary>
-            <param name="model"></param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.FileRenamed(System.IO.FileInfo,System.IO.FileInfo)">
-            <summary>
-            Notifies the store that a file has been renamed
-            </summary>
-            <param name="oldFile">The old file</param>
-            <param name="newFile">The new/renamed file</param>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.TryGetCachedImportedGeometry(System.IO.FileInfo)">
-            <summary>
-            Tries to get the imported geometry data from the cache.
-            </summary>
-            <param name="file">The file that should be checked if it is present in the cache.</param>
-            <returns>The GeometryImporterResult of the specified file from the cache or null if it was not found.</returns>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.CacheImportedGeometry(System.IO.FileInfo,GeometryViewer.Algorithms.Importing.GeometryImporterResult)">
-            <summary>
-            Adds or updates an entry in the imported geometry cache.
-            </summary>
-            <param name="file">File that was imported.</param>
-            <param name="geometry">The GeometryImporterResult of the imported geometry.</param>
-        </member>
-        <member name="M:GeometryViewer.IO.IGeometryModelStore.OnImporterWarning(System.Collections.Generic.IEnumerable{System.String})">
-            <summary>
-            Used to signal Warnings that occurred while importing geometry.
-            </summary>
-            <param name="messages">A list of messages that should be reported.</param>
-        </member>
-        <member name="T:GeometryViewer.IO.SimGeoIO">
-            <summary>
-            Provides methods for accessing simgeo format files. Currently only the Plaintext version is supported
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.IO.SimGeoIO.SimGeoVersion">
-            <summary>
-            The current version of the SimGeo Format
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.IO.SimGeoIO.WriteMode">
-            <summary>
-            Describes which format should be written
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.IO.SimGeoIO.WriteMode.Plaintext">
-            <summary>
-            Plaintext format
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.IO.SimGeoIO.Save(GeometryViewer.Model.GeometryModel,System.IO.FileInfo,GeometryViewer.IO.SimGeoIO.WriteMode)">
-            <summary>
-            Stores the model to a file
-            </summary>
-            <param name="model">The model to store</param>
-            <param name="path">FileInfo of the target file. The file gets overridden without conformation!!</param>
-            <param name="mode">Format in which the file should be written</param>
-        </member>
-        <member name="M:GeometryViewer.IO.SimGeoIO.Load(System.IO.FileInfo,GeometryViewer.IO.ILoaderGeometryViewerInstance,GeometryViewer.IO.IGeometryModelStore,GeometryViewer.Algorithms.Generation.OffsetAlgorithm)">
-            <summary>
-            Reads a model from a file
-            </summary>
-            <param name="geometryFile">The file</param>
-            <param name="instance">The instance which requested the loading</param>
-            <param name="modelStore">The model store in which the GeometryModels should be loaded</param>
-            <param name="offsetAlg">Defines how offset surfaces should be generated after loading</param>
-            <returns>The geometry model</returns>
-        </member>
-        <member name="M:GeometryViewer.IO.SimGeoIO.GetEncoding(System.String)">
-            <summary>
-            Determines a text file's encoding by analyzing its byte order mark (BOM).
-            Defaults to ASCII when detection of the text file's endianness fails.
-            From https://stackoverflow.com/questions/3825390/effective-way-to-find-any-files-encoding
-            </summary>
-            <param name="filename">The text file to analyze.</param>
-            <returns>The detected encoding.</returns>
-        </member>
-        <member name="T:GeometryViewer.AppSettings">
-            <summary>
-            Stores application wide settings
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.Instance">
-            <summary>
-            Returns the singleton instance
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.AppSettings.#cctor">
-            <summary>
-            Initializes the singleton and other static resources
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.Tolerance">
-            <summary>
-            Gets or sets the general calculation tolerance
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.UserSettingsDirectory">
-            <summary>
-            Returns the path where user settings should be stored
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.LayoutFile">
-            <summary>
-            Returns the path to the window layout file
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.Encoding">
-            <summary>
-            Returns the encoding for all files
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.PluginDirectory">
-            <summary>
-            Returns the path to the plugin directory
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.CalculateOffsetSurfaces">
-            <summary>
-            Specifies whether offset surfaces should be calculated
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.OffsetSurfaceRecalcDelay">
-            <summary>
-            Stores the delay for offset surface full mode recalculations during fast mode.
-            In milliseconds
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.ResetLayout">
-            <summary>
-            When set to true, the next layout storing will delete the file instead
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.AppSettings.ResetSettings">
-            <summary>
-            When set to true, the next settings storing will delete the file instead
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.AppSettings.#ctor">
-            <summary>
-            Initializes a new instance of the AppSettings class
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.CommunicationTransfer.ILoaderGeometryExchange">
-            <summary>
-            Interface for managing the information exchange btw. components and geometry and resource file management.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.CommunicationTransfer.ILoaderGeometryExchange.ResourceFileExists(System.IO.FileInfo)">
-            <summary>
-            Checks if the resource file with the given path already exists.
-            </summary>
-            <param name="file">The file with file extension, *not* the path</param>
-            <returns>true, if the resource file was found on record</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.CommunicationTransfer.ILoaderGeometryExchange.IsValidResourcePath(System.IO.FileInfo,System.Boolean)">
-            <summary>
-            Checks if the file can be added as a resource file.
-            </summary>
-            <param name="fi">the info about the file</param>
-            <param name="isContained">if true, the file is contained in the project's working directory</param>
-            <returns>true, if the file can be used as a resource, false otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.CommunicationTransfer.ILoaderGeometryExchange.AddResourceFile(System.IO.FileInfo)">
-            <summary>
-            Adds the file name to the list of resources.
-            </summary>
-            <param name="fileName">the name of the file to add</param>
-        </member>
-        <member name="M:GeometryViewer.Model.CommunicationTransfer.ILoaderGeometryExchange.GetResourceFileIndex(System.IO.FileInfo)">
-            <summary>
-            Returns the index of the given file in the resource manager.
-            </summary>
-            <param name="fi">the info about the file</param>
-            <returns>Either the index or -1</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.CommunicationTransfer.ILoaderGeometryExchange.GetFileFromResourceIndex(System.Int32)">
-            <summary>
-            Returns the FileInfo for a given resource index
-            </summary>
-            <param name="resourceIndex"></param>
-            <returns></returns>
-        </member>
-        <member name="T:GeometryViewer.Model.DerivedColor">
-            <summary>
-            Stores a color that can be derived from a parent object
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.DerivedColor.Color">
-            <summary>
-            Returns the color (either local or derived)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.DerivedColor.LocalColor">
-            <summary>
-            Returns the local color
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.DerivedColor.ParentColor">
-            <summary>
-            Returns the parent color
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.DerivedColor.Parent">
-            <summary>
-            Returns the parent object (or null when no parent is set)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.DerivedColor.PropertyName">
-            <summary>
-            Returns the name of the parent object's property (or null when no parent is set)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.DerivedColor.IsFromParent">
-            <summary>
-            Returns whether the local color or the parent color should be used
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.DerivedColor.#ctor(System.Windows.Media.Color)">
-            <summary>
-            Initializes a new instance of the DerivedColor class
-            </summary>
-            <remarks>Using this constructor it is impossible to derive colors later</remarks>
-            <param name="color">A color</param>
-        </member>
-        <member name="M:GeometryViewer.Model.DerivedColor.#ctor(System.Windows.Media.Color,System.Object,System.String)">
-            <summary>
-            Initializes a new instance of the DerivedColor class
-            </summary>
-            <param name="color">A color</param>
-            <param name="parent">The parent object</param>
-            <param name="property">The name of the parent color property (of type DerivedColor)</param>
-        </member>
-        <member name="M:GeometryViewer.Model.DerivedColor.#ctor(GeometryViewer.Model.DerivedColor)">
-            <summary>
-            Initializes a new instance of the DerivedColor class
-            </summary>
-            <remarks>Using this constructor it is impossible to derive colors later</remarks>
-            <param name="source">Another DerivedColor to copy the data from</param>
-        </member>
-        <member name="E:GeometryViewer.Model.DerivedColor.PropertyChanged">
-            <inheritdoc />
-        </member>
-        <member name="T:GeometryViewer.Model.GeometryModelReplacedEventArgs">
-            <summary>
-            EventArgs for the Replaced event
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModelReplacedEventArgs.OldGeometry">
-            <summary>
-            The old geometry data
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModelReplacedEventArgs.NewGeometry">
-            <summary>
-            The new geometry data
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.GeometryModelReplacedEventArgs.#ctor(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Initializes a new instance of the GeometryModelReplacedEventArgs class
-            </summary>
-            <param name="oldGeometry">The old geometry data</param>
-            <param name="newGeometry">The new geometry data</param>
-        </member>
-        <member name="T:GeometryViewer.Model.GeometryModel">
-            <summary>
-            Contains data for the geometry of a SIMULTAN geometry file
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModel.Name">
-            <summary>
-            Returns the display name
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModel.Id">
-            <summary>
-            A unique number that identifies the model. Usually supplied per project from the ComponentManager
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModel.Geometry">
-            <summary>
-            The geometry of this model. Invokes the Replaced event when changed
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModel.Permissions">
-            <summary>
-            Gets or sets the permissions that are applicable to this model
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModel.File">
-            <summary>
-            Stores the geometry file for this model
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.GeometryModel.LinkedModels">
-            <summary>
-            A list of all models that are linked to this model
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.GeometryModel.Replaced">
-            <summary>
-            Invoked when the Geometry of this model has changed
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.GeometryModel.PropertyChanged">
-            <summary>
-            The PropertyChanged EventHandler
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.GeometryModel.#ctor(System.Guid,System.String,System.IO.FileInfo,GeometryViewer.Model.OperationPermission,GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Initializes a new instance of the GeometryModel class
-            </summary>
-            <param name="id">Unique id of this GeometryModel (used to handle GeometryReferences between models)</param>
-            <param name="name">The display name</param>
-            <param name="file">The geometry file to use</param>
-            <param name="permissions">The permissions for this model</param>
-            <param name="geometry">The geometry for this model</param>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.BaseEdgeContainer">
-            <summary>
-            Base class for all edge containing geometries (Polyline, EdgeLoop)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseEdgeContainer.Edges">
-            <summary>
-            Stores a list of edges in this container
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseEdgeContainer.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.String)">
-            <summary>
-            Initializes a new instance of the BaseEdgeContainer class
-            </summary>
-            <param name="id">The unique identifier for this object</param>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="name">The name of the geometry</param>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseEdgeContainer.Faces">
-            <summary>
-            Returns a list of all faces that use this Container
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.BaseGeometry">
-            <summary>
-            Base class for all geometric objects
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.IsActuallyVisible">
-            <summary>
-            Gets or sets if this Geometry is visible including visibility of parent objects (Layer, GeometryModel)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.IsVisible">
-            <summary>
-            Gets or sets if this Geometry is visible
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.Id">
-            <summary>
-            Returns a unique identifier for this object
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.ModelGeometry">
-            <summary>
-            Returns the model this geometry object belongs to
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.Layer">
-            <summary>
-            Gets or sets the layer on which this geometry object is placed
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.Name">
-            <summary>
-            Gets or sets the display name of this object
-            </summary>
-            <remarks>The name is NOT unique</remarks>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.Color">
-            <summary>
-            Color of the object
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.GeometryHasChanged">
-            <summary>
-            Determines if the geometry was changed during a batch operation
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.BaseGeometry.Parent">
-            <summary>
-            Stores a reference to the parent geometry
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.String)">
-            <summary>
-            Initializes a new instance of the BaseGeometry class
-            </summary>
-            <param name="id">Unique identifier for this object</param>
-            <param name="layer">The layer for this object</param>
-            <param name="name">The display name</param>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.BaseGeometry.GeometryEventHandler">
-            <summary>
-            Handler for the GeometryChanged event.
-            </summary>
-            <param name="sender">Object which emitted the event</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.BaseGeometry.GeometryChanged">
-            <summary>
-            Emitted when geometric properties of this object have changed
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.NotifyGeometryChanged">
-            <summary>
-            Emits the GeometryChanged event when called outside a batch operation. Otherwise notifies the geometry to send the event after the batch operation
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.OnGeometryChanged(System.Boolean)">
-            <summary>
-            Calls the GeometryChanged event when NotifyGeometryChanged has marked this geometry during a batch operation
-            This event is not sent when either notifyGeometryChanged is False or when a TopologyChanged will be emitted instead
-            </summary>
-            <param name="notifyGeometryChanged">Defines whether the event should be send</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.BaseGeometry.TopologyChanged">
-            <summary>
-            Emitted when the topology of this element or of one of its subelements has changed (e.g. when a edge uses different vertices now)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.NotifyTopologyChanged">
-            <summary>
-            Emits the TopologyChanged event when called outside a batch operation. Otherwise notifies the geometry to send the event after the batch operation
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.OnTopologyChanged">
-            <summary>
-            Calls the TopologyChanged event when NotifyTopologyChanged has marked this geometry during a batch operation
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.BaseGeometry.PropertyChanged">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.OnPropertyChanged(System.String)">
-            <summary>
-            Emits the PropertyChanged event
-            </summary>
-            <param name="prop">The name of the property</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.MakeConsistent(System.Boolean,System.Boolean)">
-            <summary>
-            Ensures the the geometry is consistent. Called after batch operations
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.RemoveFromModel">
-            <summary>
-            Removes the Geometry from the model
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.AddToModel">
-            <summary>
-            Adds the Geometry to the model (inverse of RemoveFromModel)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.BaseGeometry.AssignToLayerColor(GeometryViewer.Model.Geometry.Layer)">
-            <summary>
-            Called during Layer reassignment to handle colors. The default implementation transers the color parent to the layer.
-            </summary>
-            <param name="layer">The new layer</param>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryReference">
-            <summary>
-            Stores a reference to a (potentially unloaded) geometry. This class stores the GeometryModel.Id and the BaseGeometry.Id.
-            When loaded, Target points to the actual BaseGeometry. Name is cached and available even if the corresponding GeometryModel
-            is not loaded.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryReference.GeometryID">
-            <summary>
-            The BaseGeometry.Id of the target
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryReference.ModelID">
-            <summary>
-            The GeometryModel.Id of the target
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryReference.Name">
-            <summary>
-            The name. Returns Target.Name when Target != null. Otherwise a cached name
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryReference.Target">
-            <summary>
-            Returns the target BaseGeometry if loaded, or Null
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryReference.IsLoaded">
-            <summary>
-            Returns true when the Geometry is loaded.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryReference.ModelStore">
-            <summary>
-            Stores a list of all GeometryModels in the application
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryReference.PropertyChanged">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryReference.#ctor(GeometryViewer.Model.Geometry.BaseGeometry,GeometryViewer.IO.IGeometryModelStore)">
-            <summary>
-            Initializes a new instance of the GeometryReference class
-            </summary>
-            <param name="target">The target geometry</param>
-            <param name="modelStore">The modelstore in which this geometry exists or may exist in future</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryReference.#ctor(System.Guid,System.UInt64,System.String,GeometryViewer.Model.Geometry.BaseGeometry,GeometryViewer.IO.IGeometryModelStore)">
-            <summary>
-            Initializes a new instance of the GeometryReference class
-            </summary>
-            <param name="modelId">Id of the target GeometryModel</param>
-            <param name="geometryId">Id of the target BaseGeometry</param>
-            <param name="cachedName">The cached name (only used when cachedGeometry is null and the model isn't loaded)</param>
-            <param name="cachedGeometry">The target geometry (may be null)</param>
-            <param name="modelStore">The modelstore in which this geometry exists or may exist in future</param>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeoReference">
-            <summary>
-            Stores the combination of a vertex and a Geo-Reference location
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeoReference.Vertex">
-            <summary>
-            The vertex
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeoReference.ReferencePoint">
-            <summary>
-            The geo location, x = long (degrees), y = lat (degrees), z = height (meter) 
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeoReference.#ctor(GeometryViewer.Model.Geometry.Vertex,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Initializes a new instance of the GeoReference class
-            </summary>
-            <param name="vertex">The vertex</param>
-            <param name="reference">The reference location</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeoReference.PropertyChanged">
-            <inheritdoc />
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.PEdge">
-            <summary>
-            Stores the relation between an edge and it's EdgeContainer (EdgeLoop/Polyline)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PEdge.Parent">
-            <summary>
-            The container (EdgeLoop or Polyline)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PEdge.StartVertex">
-            <summary>
-            Returns the start vertex 
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PEdge.Edge">
-            <summary>
-            Returns the represented edge
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PEdge.Orientation">
-            <summary>
-            Returns the orientation to the original Edge (Forward means Vertex[0] to Vertex[1])
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PEdge.Next">
-            <summary>
-            The next pedge in the container (might be null)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PEdge.Prev">
-            <summary>
-            The previouse pedge in the container (might be null)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.PEdge.#ctor(GeometryViewer.Model.Geometry.Edge,GeometryViewer.Model.Geometry.GeometricOrientation,GeometryViewer.Model.Geometry.BaseEdgeContainer)">
-            <summary>
-            Initializes a new instance of the PEdge class
-            </summary>
-            <param name="edge">The edge</param>
-            <param name="orientation">Orientation of the edge. Forward means from Vertices[0] to Vertices[1]</param>
-            <param name="parent">The container</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.PEdge.MakeConsistent">
-            <inheritdoc />
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.Edge">
-            <summary>
-            Represents an edge
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Edge.Vertices">
-            <summary>
-            Returns the vertices defining this edge.
-            </summary>
-            <remarks>Has to contain exactly two vertices</remarks>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Edge.PEdges">
-            <summary>
-            Returns all pedges attached to this egde
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Edge.#ctor(GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Vertex})">
-            <summary>
-            Initializes a new instance of the Edge class
-            </summary>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="vertices">The vertices defining this edge</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Edge.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Vertex})">
-            <summary>
-            Initializes a new instance of the Edge class
-            </summary>
-            <param name="id">The unique identifier for this object</param>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="vertices">The vertices defining this edge</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Edge.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Edge.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Edge.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.EdgeLoop">
-            <summary>
-            Represents a closed edge loop
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.EdgeLoop.Edges">
-            <summary>
-            Returns the PEdges in the EdgeLoop
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.EdgeLoop.Faces">
-            <summary>
-            Gets or sets the Face this Loop is associated with
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.EdgeLoop.#ctor(GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Initializes a new instance of the EdgeLoop class
-            </summary>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="edges">A list of edges in this loop</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.EdgeLoop.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Initializes a new instance of the EdgeLoop class
-            </summary>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="edges">A list of edges in this loop</param>
-            <param name="id">The unique identifier for this object</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.EdgeLoop.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.EdgeLoop.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.EdgeLoop.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.Face">
-            <summary>
-            Represents a planar surface
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Face.Boundary">
-            <summary>
-            Returns the boundary of the polygon
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Face.Holes">
-            <summary>
-            Returns a list of holes in the polygon
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Face.Orientation">
-            <summary>
-            Stores the orientation of the face. Forward means CCW, Backward means CW
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Face.Normal">
-            <summary>
-            Returns the face normal
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Face.PFaces">
-            <summary>
-            Returns all PFaces associated with this Face
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Face.#ctor(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.EdgeLoop,GeometryViewer.Model.Geometry.GeometricOrientation,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.EdgeLoop})">
-            <summary>
-            Initializes a new instance of the Face class
-            </summary>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="boundary">The boundary loop</param>
-            <param name="orientation">Orientation of the face</param>
-            <param name="holes">A list of hole loops</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Face.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.EdgeLoop,GeometryViewer.Model.Geometry.GeometricOrientation,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.EdgeLoop})">
-            <summary>
-            Initializes a new instance of the Face class
-            </summary>
-            <param name="id">The unique identifier for this object</param>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="boundary">The boundary loop</param>
-            <param name="orientation">Orientation of the face</param>
-            <param name="holes">A list of hole loops</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Face.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Face.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Face.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometricOrientation">
-            <summary>
-            Describes an Orientation
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.Geometry.GeometricOrientation.Forward">
-            <summary>
-            Orientated Forward
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.Geometry.GeometricOrientation.Backward">
-            <summary>
-            Orientated Backward
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.Geometry.GeometricOrientation.Undefined">
-            <summary>
-            Undefined Orientation
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryModelData">
-            <summary>
-            Represents the geometry of a GeometryModel
-            </summary>
-            
-            There are several events relevant for working with GeometryModels:
-            - GeometryChanged
-              BaseGeometry::GeometryChanged is emitted whenever the underlying geometry has changed. This event is delayed during
-                batch operations and invoked during EndBatchOperation for all modified geometries
-              GeometryModel::GeometryChanged is invoke for each invocation of BaseGeometry::GeometryChanged. This event is delayed during
-                batch operations and is invoked *once* during EndBatchOperation when at least one geometry has changed.
-                
-            - GeometryAdded/GeometryRemoved
-              Emitted when one of the ObservableCollections has changed. This events is delayed during batch operations and is
-              invoked during EndBatchOperation once for all added/removed geometries.
-              
-            - TopologyChanged
-              Similar to GeometryAdded/GeometryRemoved. Invoked when one of the underlying geometry lists has changed. This event
-                is delayed during batch operations and issued *once* when any geometry has been added or removed.
-            
-            - BatchOperationFinished is invoked once when the batch operation has ended, no matter if anything was modified.
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Model">
-            <summary>
-            Stores the mode this geometry is related to.
-            Can either be the current model or the last one this geometry was attached to
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.OffsetQuery">
-            <summary>
-            The offset query object for this model
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Vertices">
-            <summary>
-            Returns a list of all Vertex instances
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Edges">
-            <summary>
-            Returns a list of all Edge instances
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.EdgeLoops">
-            <summary>
-            Returns a list of all EdgeLoop instances
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Polylines">
-            <summary>
-            Returns a list of lal polyline instances
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Faces">
-            <summary>
-            Returns a list of all Faces instances
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Volumes">
-            <summary>
-            Returns a list of all Volumes instances
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Layers">
-            <summary>
-            Returns a list of all top level Layer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.ProxyGeometries">
-            <summary>
-            Returns a list of proxy geometries
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.GeoReferences">
-            <summary>
-            Stores a list of georeferenced vertices
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.Geometries">
-            <summary>
-            Returns an IEnumerable with all geometries in the model.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.HandleConsistency">
-            <summary>
-            Returns whether consistency handling is enabled or not.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.IsVisible">
-            <summary>
-            Gets or sets if this Geometry is visible
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometryModelData.OffsetModel">
-            <summary>
-            Stores the offset surface model
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryModelData.BaseGeometryEventHandler">
-            <summary>
-            Delegate for geometry add and remove events
-            </summary>
-            <param name="sender">Sending GeometryModel</param>
-            <param name="geometry">The added/removed geometry</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.GeometryAdded">
-            <summary>
-            Called whenever a BaseGeometry is added
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.GeometryRemoved">
-            <summary>
-            Called whenever a BaseGeometry is deleted
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.BatchOperationFinished">
-            <summary>
-            Invoked when a batch operation has finished
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryModelData.OperationFinishedEventHandler">
-            <summary>
-            EventHandler for the OperationFinished event
-            </summary>
-            <param name="sender">The sending model</param>
-            <param name="affectedGeometries">List of geometries that were affected by the operation</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.OperationFinished">
-            <summary>
-            Emitted whenever a user-control operation has finished (e.g., Move, Extrude, Draw, ...)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.OnOperationFinished(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Issues a OperationFinished event
-            </summary>
-            <param name="affectedGeometries">List of geometries that were affected by the operation</param>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryModelData.TopologyChangedEventHandler">
-            <summary>
-            Handler for the TopologyChanged event.
-            </summary>
-            <param name="sender">Object which emitted the event</param>
-            <param name="geometries">A list of all geometries that were affected. Note that this list might contain already deleted/removed geometry</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.TopologyChanged">
-            <summary>
-            Emitted when objects were added or removed during a batch operation
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryModelData.GeometryChangedEventHandler">
-            <summary>
-            Handler for the GeometryChanged event.
-            </summary>
-            <param name="sender">Object which emitted the event</param>
-            <param name="geometries">List of BaseGeometries where the underlying geometry has changed</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.GeometryChanged">
-            <summary>
-            Emitted when a geometric property of this model or of one of the submodels has changed
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometryModelData.GeoReferencesChangedEventHandler">
-            <summary>
-            EventHandler for changed GeoReferences.
-            </summary>
-            <param name="sender">The sender of the event.</param>
-            <param name="geoReferences">The GeoReferences that got changed.</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.GeoReferencesChanged">
-            <summary>
-            The event for when GeoReferences change.
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometryModelData.PropertyChanged">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.#ctor(GeometryViewer.Model.OffsetSurface.IOffsetQueryable)">
-            <summary>
-            Initializes a new instance of the GeometryModelData class
-            </summary>
-            <param name="offsetQuery">The query object for offset surface offsets</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.GetFreeId(System.Boolean)">
-            <summary>
-            Returns the next free unique id
-            </summary>
-            <returns>A free id</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.GetMaxUsedId">
-            <summary>
-            Returns the maximum used unique id
-            </summary>
-            <returns>Maximum used unique id</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.RegisterId(System.UInt64)">
-            <summary>
-            Registes an id as used.
-            </summary>
-            <param name="id">The id</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.FreeId(System.UInt64)">
-            <summary>
-            Frees an id.
-            </summary>
-            <param name="id">The id</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.StartBatchOperation">
-            <summary>
-            Starts a batch edit operation. During this operation no consistency checks are performed. Note that list might be outdated during the batch operation
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.EndBatchOperation">
-            <summary>
-            Ends a batch edit operation and ensures the model is in a consistent state.
-            Sends events that have been delayed during the batch operation.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.MakeConsistent">
-            <summary>
-            Updates all derived data structure in a model
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.Clone">
-            <summary>
-            Creates a deep copy of the model and all geometries in the model
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.NotifyTopologyChanged(GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Notifies the model that the topology has changed. Called by BaseGeomtries
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.ContainsGeometry(GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Returns True when a BaseGeometry is contained in the Model
-            </summary>
-            <param name="geometry">The geometry</param>
-            <returns>True when the BaseGeometry is contained in the Model, otherwise False</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.GeometryFromId(System.UInt64)">
-            <summary>
-            Returns the BaseGeometry with the given ID
-            </summary>
-            <param name="id">ID of the Geometry</param>
-            <returns>The BaseGeometry or null when the id doesn't exist</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometryModelData.LayerFromId(System.UInt64)">
-            <summary>
-            Returns the layer with the given ID
-            </summary>
-            <param name="id">The id to search for</param>
-            <returns>The layer with this id, or null when no such layer exists</returns>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.ActiveGeometryChangedEventArgs">
-            <summary>
-            Event args for the ActiveChanged event
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ActiveGeometryChangedEventArgs.OldValue">
-            <summary>
-            The old active geometry
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ActiveGeometryChangedEventArgs.NewValue">
-            <summary>
-            The new active geometry
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ActiveGeometryChangedEventArgs.#ctor(GeometryViewer.Model.Geometry.BaseGeometry,GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Initializes a new instance of the ActiveGeometryChangedEventArgs class
-            </summary>
-            <param name="oldValue">The old active geometry</param>
-            <param name="newValue">The new active geometry</param>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometrySelectionModel">
-            <summary>
-            Provides methods to select geometries
-            
-            Usage Hints: If possible use the Select/Deselect methods with lists of objects.
-            Do not iterate over a geometry list and call Select on each element since this will issue a SelectionChanged Event per Select-call.
-            SelectionChanged is issued whenever a Select/Deselect operation has finished (once per operation).
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectedGeometry">
-            <summary>
-            A list of all selected geometries
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometrySelectionModel.ActiveGeometry">
-            <summary>
-            Gets or sets the active geometry
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedReason">
-            <summary>
-            Enumeration for reasons why the selection has changed
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedReason.User">
-            <summary>
-            The user has changed the selection
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedReason.UndoRedo">
-            <summary>
-            The selection has not really changed by the undo-operation has exchanged geometry
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedEventArgs">
-            <summary>
-            Event args for the SelectionChanged event
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedEventArgs.#ctor(GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedReason,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry},System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Initializes a new instance of the SelectionChangedEventArgs class
-            </summary>
-            <param name="reason">The reason for the selection change</param>
-            <param name="added">A list of all additionally selected objects (may be null)</param>
-            <param name="removed">A list of all deselected objects (may be null)</param>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedEventArgs.Reason">
-            <summary>
-            The reason for the selection change
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedEventArgs.Added">
-            <summary>
-            A list of all additionally selected objects (may be null)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedEventArgs.Removed">
-            <summary>
-            A list of all deselected objects (may be null)
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChangedEventHandler">
-            <summary>
-            EventHandler for the SelectionChanged event
-            </summary>
-            <param name="sender">The sender</param>
-            <param name="args">The arguments for this event</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometrySelectionModel.SelectionChanged">
-            <summary>
-            Invoked whenever the selection changes
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.#ctor(System.Collections.ObjectModel.ObservableCollection{GeometryViewer.Model.GeometryModel})">
-            <summary>
-            Initializes a new instance of the GeometrySelectionModel class
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.GeometrySelectionModel.ActiveGeometryChangedEventHandler">
-            <summary>
-            Event handler delegate for the ActiveChanged event
-            </summary>
-            <param name="sender">The sending object</param>
-            <param name="args">The event arguments</param>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.GeometrySelectionModel.ActiveChanged">
-            <summary>
-            Invoked when the active geometry has changed
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Select(GeometryViewer.Model.Geometry.BaseGeometry,System.Boolean)">
-            <summary>
-            Selects a BaseGeometry
-            </summary>
-            <param name="geometry">The geometry</param>
-            <param name="clearSelection">When true, the list of selected objects is cleared</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Select(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry},System.Boolean)">
-            <summary>
-            Selects a number of geometries
-            </summary>
-            <param name="geometry">The geometries to select</param>
-            <param name="clearSelection">When set to true, the SelectionModel is cleared before selecting the new geometries</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Select(GeometryViewer.Model.Geometry.GeometryModelData,System.Boolean)">
-            <summary>
-            Selects everything inside a GeometryModel
-            </summary>
-            <param name="model">The model</param>
-            <param name="clearSelection">When set to true, the selection is cleared</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Deselect(GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Unselects a Geometry
-            </summary>
-            <param name="geometry">The geometry</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Deselect(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Deselects everything inside a GeometryModel
-            </summary>
-            <param name="model">The model</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Deselect(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.BaseGeometry})">
-            <summary>
-            Deselects all elements from a list
-            </summary>
-            <param name="geometry">List of geometries to deselect</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.ToggleSelection(GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Toggles the selection state for a Geometry
-            </summary>
-            <param name="geometry">The geometry</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.IsSelected(GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Determines whether a geometry is selected or not
-            </summary>
-            <param name="geometry">The geometry</param>
-            <returns>True when the BaseGeometry is selected, otherwise False</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.IsSelected(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Determines whether a GeometryModel is selected
-            </summary>
-            <param name="model">The model</param>
-            <returns>True when everything inside the model is selected, False otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.Clear">
-            <summary>
-            Clears the selection list
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.GeometrySelectionModel.MakeConsistent">
-            <summary>
-            Ensures that the SelectionModel only contains valid geometry
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.Layer">
-            <summary>
-            Represents a layer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Name">
-            <summary>
-            Gets or sets the Name of the Layer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Color">
-            <summary>
-            Gets or sets the color of the Layer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Model">
-            <summary>
-            Returns the GeometryModel this Layer belongs to
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Elements">
-            <summary>
-            Returns a list of all geometric elements in this layer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Layers">
-            <summary>
-            Returns a list of sublayer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Parent">
-            <summary>
-            Stores the parent layer. Automatically set when adding the layer as a child
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.IsActuallyVisible">
-            <summary>
-            Gets or sets if this Layer is visible including visibility of parent objects (parent Layer, GeometryModel)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.IsVisible">
-            <summary>
-            Gets or sets if this Layer is visible
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Layer.Id">
-            <summary>
-            Unique ID of this layer
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Model.Geometry.Layer.PropertyChanged">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Layer.#ctor(GeometryViewer.Model.Geometry.GeometryModelData,System.String)">
-            <summary>
-            Initializes a new instance of the Layer class
-            </summary>
-            <param name="model">The GeometryModel this layer belongs to</param>
-            <param name="name">The display name</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Layer.#ctor(System.UInt64,GeometryViewer.Model.Geometry.GeometryModelData,System.String)">
-            <summary>
-            Initializes a new instance of the Layer class
-            </summary>
-            <param name="id">Unique Id for the layer</param>
-            <param name="model">The GeometryModel this layer belongs to</param>
-            <param name="name">The display name</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Layer.FindInHierarchy(System.String)">
-            <summary>
-            Searches for a layer with given name in the whole hierarchy with this layer as root. 
-            </summary>
-            <param name="layerName">Layer name to search for</param>
-            <returns>Returns layer if found or null otherwise</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Layer.Clone(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Clones a layer and all sublayers and copies them into given target GeometryModel.
-            </summary>
-            <param name="target">Target GeometryModel</param>
-            <returns>Cloned layer</returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Layer.Clone(GeometryViewer.Model.Geometry.GeometryModelData,System.Collections.Generic.Dictionary{GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Layer})">
-            <summary>
-            Clones a layer and all sublayers and copies them into given target GeometryModel. Additionally, a mapping between old and new layers is maintained.
-            </summary>
-            <param name="target">Target GeometryModel</param>
-            <param name="mapping">Mapping that contains old layers as keys and new (cloned) layers as values</param>
-            <returns>Cloned layer</returns>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.PFace">
-            <summary>
-            Stores a oriented association of a Face with a Volume
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PFace.Face">
-            <summary>
-            Returns the Face
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PFace.Volume">
-            <summary>
-            Returns the Volume
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.PFace.Orientation">
-            <summary>
-            Returns the orientation relative to the Face
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.PFace.#ctor(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.Volume,GeometryViewer.Model.Geometry.GeometricOrientation)">
-            <summary>
-            Initializes a new instance of the PFace class
-            </summary>
-            <param name="face">The Face</param>
-            <param name="volume">The Volume</param>
-            <param name="orientation">The orientation relative to the Face (Forward means same Normal)</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.PFace.MakeConsistent">
-            <inheritdoc />
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.Polyline">
-            <summary>
-            Represents a polyline (consisting of multiple connected edges).
-            A polyline may not be closed. For closed loops have a look at the EdgeLoop class
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Polyline.Edges">
-            <inheritdoc/>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Polyline.Faces">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Polyline.#ctor(GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Initializes a new Polyline class
-            </summary>
-            <param name="layer">The layer on which the polyline is created</param>
-            <param name="edges">A list of edges for this polyline. The edges have to form a single path without branches.
-            The order is not important.
-            </param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Polyline.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Edge})">
-            <summary>
-            Initializes a new Polyline class
-            </summary>
-            <param name="id">The unique id for this polyline</param>
-            <param name="layer">The layer on which the polyline is created</param>
-            <param name="edges">A list of edges for this polyline. The edges have to form a single path without branches.
-            The order is not important.
-            </param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Polyline.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Polyline.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Polyline.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.ProxyGeometry">
-            <summary>
-            Displays a arbitrary triangle mesh that is attached to a vertex.
-            The proxy acts similar to the vertex during selection and all other operations
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Vertex">
-            <summary>
-            The vertex to which the proxy geometry is attached
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Positions">
-            <summary>
-            A list of triangles vertices
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Normals">
-            <summary>
-            A list of vertex normals
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Indices">
-            <summary>
-            Index list for the triangle mesh (always three indices form a face)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Size">
-            <summary>
-            Gets or sets the size (scaling) of the proxy geometry
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Rotation">
-            <summary>
-            Gets or sets the local rotation of the proxy geometry
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.EulerAngles">
-            <summary>
-            Euler angles of rotation
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.ProxyGeometry.Transformation">
-            <summary>
-            Returns the full model matrix. Includes Size and the vertex position.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ProxyGeometry.#ctor(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Vertex)">
-            <summary>
-            Initializes a new instance of the ProxyGeometry class
-            </summary>
-            <param name="layer">The layer on which the proxy geometry should exist</param>
-            <param name="vertex">The vertex to which the proxy is attached</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ProxyGeometry.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Vertex,System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Collections.Generic.List{System.Windows.Media.Media3D.Vector3D},System.Collections.Generic.List{System.Int32})">
-            <summary>
-            Initializes a new instance of the ProxyGeometry class
-            </summary>
-            <param name="id">The unique id of this geometry</param>
-            <param name="layer">The layer on which the proxy geometry should exist</param>
-            <param name="vertex">The vertex to which the proxy is attached</param>
-            <param name="positions">List of vertex positions, default null</param>
-            <param name="normals">List of vertex normals, default null</param>
-            <param name="indices">List of indices, default null</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ProxyGeometry.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ProxyGeometry.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ProxyGeometry.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.ProxyGeometry.AssignToLayerColor(GeometryViewer.Model.Geometry.Layer)">
-            <inheritdoc />
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.Vertex">
-            <summary>
-            Represents a point in 3D space
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Vertex.Position">
-            <summary>
-            Gets or sets the position
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Vertex.Edges">
-            <summary>
-            Returns all edges the vertex is part of
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Vertex.ProxyGeometries">
-            <summary>
-            Stores a list of proxy geometries that are attached to this vertex
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.#ctor(GeometryViewer.Model.Geometry.Layer,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Initializes a new instance of the Vertex class
-            </summary>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="position">The position of the vertex</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Initializes a new instance of the Vertex class
-            </summary>
-            <param name="id">The unique identifier for this object</param>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="position">The position of the vertex</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.Clone">
-            <summary>
-            Creates a deep copy of the vertex
-            </summary>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Vertex.Clone(GeometryViewer.Model.Geometry.Layer)">
-            <summary>
-            Creates a deep copy of the vertex on a specific layer
-            </summary>
-            <param name="layer">The target layer</param>
-            <returns>The new vertex</returns>
-        </member>
-        <member name="T:GeometryViewer.Model.Geometry.Volume">
-            <summary>
-            Represents a volume
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Volume.Faces">
-            <summary>
-            Returns a list of all boundary PFaces
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.Geometry.Volume.IsConsistentOriented">
-            <summary>
-            Stores whether the faces describe a closed and consistently oriented volume. If False, several methods might
-            return wrong values (e.g. Volume calculation returns NaN).
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Volume.#ctor(GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Face})">
-            <summary>
-            Initializes a new instance of the Volume class
-            </summary>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="faces">A list of boundary faces</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Volume.#ctor(System.UInt64,GeometryViewer.Model.Geometry.Layer,System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Face})">
-            <summary>
-            Initializes a new instance of the Volume class
-            </summary>
-            <param name="id">The unique identifier for this object</param>
-            <param name="layer">The layer this object is placed on</param>
-            <param name="faces">A list of boundary faces</param>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Volume.MakeConsistent(System.Boolean,System.Boolean)">
-            <inheritdoc />
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Volume.RemoveFromModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Volume.AddToModel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Model.Geometry.Volume.AddFace(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Adds a face to the volume
-            </summary>
-            <param name="face">The face to add</param>
-        </member>
-        <member name="T:GeometryViewer.Model.OffsetSurface.GeometryInvalidatedEventHandler">
-            <summary>
-            Event handler delegate for the GeometryInvalidated event.
-            </summary>
-            <param name="sender">the sending object</param>
-            <param name="affected_geometry">the geometry affected by the change</param>
-        </member>
-        <member name="T:GeometryViewer.Model.OffsetSurface.IOffsetQueryable">
-            <summary>
-            Interface for a class that provides offset surface thicknesses
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.OffsetSurface.IOffsetQueryable.GetFaceOffset(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Gets the outer and inner offsets of the given face according to 
-            the associated component representing a wall construction. If there is no
-            such component, both offsets are 0.0.
-            </summary>
-            <param name="_face">the face whose offsets we are looking for</param>
-            <returns>a tuple of doubles: the outer and inner offsets</returns>
-        </member>
-        <member name="E:GeometryViewer.Model.OffsetSurface.IOffsetQueryable.GeometryInvalidated">
-            <summary>
-            Invoked when a change in the source of one or more connectors causes
-            the target geometry to become invalid (e.g., size change for placed components, or wall construction thickness).
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.OffsetSurface.OffsetFace">
-            <summary>
-            Stores data for one face in an offset surface mesh
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetFace.Face">
-            <summary>
-            The associated face
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetFace.Offset">
-            <summary>
-            The office that was used for this offset face
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetFace.Openings">
-            <summary>
-            Stores initial opening loops. The key is the <see cref="T:GeometryViewer.Model.Geometry.EdgeLoop"/> which represents the opening in the reference face.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetFace.Boundary">
-            <summary>
-            Stores the final boundary polygon
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetFace.AdditionalEdges">
-            <summary>
-            Stores additional edges for this face (e.g., side-closing edges, edges of openings, ...)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetFace.AdditionalQuads">
-            <summary>
-            Stores a list of additional quads.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.OffsetSurface.OffsetFace.#ctor(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Initializes a new instance of the OffsetFace class
-            </summary>
-            <param name="face">The face which is associated with this offset face</param>
-        </member>
-        <member name="T:GeometryViewer.Model.OffsetSurface.OffsetModel">
-            <summary>
-            Stores information about offset faces
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetModel.Model">
-            <summary>
-            Stores the GeometryModel this model belongs to
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetModel.HandleGeometryInvalidated">
-            <summary>
-            Determines whether offset surfaces should be updated when the GeometryChanged event is invoked.
-            Use this to disable offset generation during multi-step operations
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetModel.OffsetQuery">
-            <summary>
-            Stores the offset query object
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetModel.Faces">
-            <summary>
-            Stores the offset faces (always inner and outer surface for each face)
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.OffsetSurface.OffsetModel.OffsetChangedEventHandler">
-            <summary>
-            EventHandler for the OffsetSurfaceChanged event
-            </summary>
-            <param name="sender">The sender</param>
-            <param name="modifiedFaces">An enumerable containg all modified faces</param>
-        </member>
-        <member name="E:GeometryViewer.Model.OffsetSurface.OffsetModel.OffsetSurfaceChanged">
-            <summary>
-            Invoked when the offset surface has changed
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OffsetSurface.OffsetModel.Generator">
-            <summary>
-            Stores the generator used to generate offset surfaces
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.OffsetSurface.OffsetModel.OnOffsetSurfaceChanged(System.Collections.Generic.IEnumerable{GeometryViewer.Model.Geometry.Face})">
-            <summary>
-            Invokes the OffsetSurfaceChanged event
-            </summary>
-            <param name="faces">All modified faces</param>
-        </member>
-        <member name="M:GeometryViewer.Model.OffsetSurface.OffsetModel.#ctor(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.OffsetSurface.IOffsetQueryable)">
-            <summary>
-            Initializes a new instance of the OffsetModel class
-            </summary>
-            <param name="model">The geometrymodel</param>
-            <param name="offsetQuery">Object to query offsets</param>
-        </member>
-        <member name="T:GeometryViewer.Model.GeometryOperationPermissions">
-            <summary>
-            Flags for permission on BaseGeometries
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.None">
-            <summary>
-            No interaction with the model is allowed
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.Select">
-            <summary>
-            The user can select geometry
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.Move">
-            <summary>
-            The user can move geometry (grab, scale, rotate)
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.Delete">
-            <summary>
-            The user can delete geometry
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.Create">
-            <summary>
-            The user can create new geometry (covers extrude and polyline drawing)
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.Split">
-            <summary>
-            The user can split existing edges
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.Unsplit">
-            <summary>
-            The user can remove points from EdgeLoops and Polylines
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.ModifyLayer">
-            <summary>
-            The user can move geometry to a new layer
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.ModifyName">
-            <summary>
-            The user can change the name of a Geometry
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.ModifyColor">
-            <summary>
-            The user can modify the color of a Geometry
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.ModifyParent">
-            <summary>
-            The user can set/unset the parent of a BaseGeometry
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryOperationPermissions.All">
-            <summary>
-            The user can do everything
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.LayerOperationPermissions">
-            <summary>
-            Flags for permissions on layer
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.None">
-            <summary>
-            No interaction with the model is allowed
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.Create">
-            <summary>
-            The user can create new layer
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.Delete">
-            <summary>
-            The user can delete layer
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.ModifyColor">
-            <summary>
-            The user can modify the color of a layer
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.ModifyTopolgy">
-            <summary>
-            The user can modify the layer structure (move layer to other parent)
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.ModifyName">
-            <summary>
-            The user can modify layer names
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.LayerOperationPermissions.All">
-            <summary>
-            The user can do everything
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.GeometryModelOperationPermissions">
-            <summary>
-            Flags for permissions on GeometryModels and linked Models
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryModelOperationPermissions.None">
-            <summary>
-            No interaction with the model is allowed
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryModelOperationPermissions.RemoveLinked">
-            <summary>
-            The user can remove linked models
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryModelOperationPermissions.AddLinked">
-            <summary>
-            The user can link additional models to this model (also includes linking networks)
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Model.GeometryModelOperationPermissions.All">
-            <summary>
-            The user can do everything
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Model.OperationPermission">
-            <summary>
-            Stores the permissions for a GeometryModel
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.None">
-            <summary>
-            Returns a permission set that allows the user to do nothing
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.DefaultWallModelPermissions">
-            <summary>
-            Returns the default permission set for wall models (everything allowed)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.DefaultNetworkPermissions">
-            <summary>
-            Returns the default permission set for Network models
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.All">
-            <summary>
-            Returns a permission set that allows everything
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.GeometryPermissions">
-            <summary>
-            Stores the permissions for BaseGeometries
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.LayerPermissions">
-            <summary>
-            Stores the permissions for layer
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.OperationPermission.ModelPermissions">
-            <summary>
-            Stores the permission for GeometryModels (and linked models)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.OperationPermission.#ctor(GeometryViewer.Model.GeometryModelOperationPermissions,GeometryViewer.Model.GeometryOperationPermissions,GeometryViewer.Model.LayerOperationPermissions)">
-            <summary>
-            Initializes a new instance of the OperationPermission class
-            </summary>
-            <param name="modelPermissions">The GeometryModel permissions</param>
-            <param name="geometryPermissions">The BaseGeometry permissions</param>
-            <param name="layerPermissions">The Layer permissions</param>
-        </member>
-        <member name="T:GeometryViewer.Model.SpatialStructures.AABB">
-            <summary>
-            Stores an axis-aligned bounding box
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABB.Min">
-            <summary>
-            The minimum along each axis
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABB.Max">
-            <summary>
-            The maximum along each axis
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABB.Content">
-            <summary>
-            The BaseGeometry this box belongs to
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABB.#ctor(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,GeometryViewer.Model.Geometry.BaseGeometry)">
-            <summary>
-            Initializes a new instance of the AABB class
-            </summary>
-            <param name="min">The minimum position</param>
-            <param name="max">The maximum position</param>
-            <param name="content">The geometry this aabb contains</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABB.#ctor(GeometryViewer.Model.Geometry.Face)">
-            <summary>
-            Initializes a new instance of the AABB class
-            </summary>
-            <param name="face">The face for which the AABB should be calculated</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABB.#ctor(GeometryViewer.Model.Geometry.Vertex)">
-            <summary>
-            Initializes a new instance of the AABB class
-            </summary>
-            <param name="vertex">The vertex for which the AABB should be calculated</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABB.#ctor(GeometryViewer.Model.Geometry.Edge)">
-            <summary>
-            Initializes a new instance of the AABB class
-            </summary>
-            <param name="edge">The edge for which the AABB should be calculated</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABB.#ctor(GeometryViewer.Model.Geometry.Volume)">
-            <summary>
-            Initializes a new instance of the AABB class
-            </summary>
-            <param name="volume">The volume for which the AABB should be calculated</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABB.Merge(System.Collections.Generic.IEnumerable{GeometryViewer.Model.SpatialStructures.AABB})">
-            <summary>
-            Calculates the aabb which contains all item AABBs
-            </summary>
-            <param name="items">A list of AABBs which should be contained in the result</param>
-            <returns>The minimum and maximum of all boxes</returns>
-        </member>
-        <member name="T:GeometryViewer.Model.SpatialStructures.AABBGrid">
-            <summary>
-            Stores AABBs in a grid structure
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABBGrid.Cells">
-            <summary>
-            The cells of the grid. May be null when no AABBs are present
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABBGrid.ActualCellSize">
-            <summary>
-            The size of each cell in the grid. Might defer from the desired size due to equalization reasons
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABBGrid.Min">
-            <summary>
-            Minimum position of the grid
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABBGrid.Max">
-            <summary>
-            Maximum position in the grid
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABBGrid.#ctor(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Initializes a new instance of the AABBGrid class
-            </summary>
-            <param name="min">Minimum position of the grid</param>
-            <param name="max">Maximum position of the grid</param>
-            <param name="cellSize">The desired cell size</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABBGrid.ForEachCell(GeometryViewer.Model.SpatialStructures.AABB,System.Action{SIMULTAN.Util.IntIndex3D})">
-            <summary>
-            Iterates over each cell a AABB touches and executes an action with this index
-            </summary>
-            <param name="item">The aabb</param>
-            <param name="action">The action</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABBGrid.ForCell(System.Windows.Media.Media3D.Point3D,System.Action{SIMULTAN.Util.IntIndex3D})">
-            <summary>
-            Executes an action for the cell the position is in
-            </summary>
-            <param name="position">The position</param>
-            <param name="action">The action</param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABBGrid.Add(GeometryViewer.Model.SpatialStructures.AABB)">
-            <summary>
-            Adds an AABB to the grid
-            </summary>
-            <param name="item"></param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABBGrid.AddRange(System.Collections.Generic.IEnumerable{GeometryViewer.Model.SpatialStructures.AABB})">
-            <summary>
-            Adds a number of AABBs to the grid
-            </summary>
-            <param name="items"></param>
-        </member>
-        <member name="M:GeometryViewer.Model.SpatialStructures.AABBGrid.Remove(GeometryViewer.Model.SpatialStructures.AABB)">
-            <summary>
-            Removes an AABB from the grid
-            </summary>
-            <param name="item"></param>
-        </member>
-        <member name="P:GeometryViewer.Model.SpatialStructures.AABBGrid.Item(SIMULTAN.Util.IntIndex3D)">
-            <summary>
-            Returns a list of all AABB which could contain a given point.
-            </summary>
-            <param name="index"></param>
-            <returns></returns>
-        </member>
-        <member name="T:GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo">
-            <summary>
-            Provides information about the ongoing background operation
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo.CancellationPending">
-            <summary>
-            True when the user wants to cancel the operation. In this case the algorithm should stop as soon as possible
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo.Cancel">
-            <summary>
-            Stores whether this operation was canceled. Set this to true while responding to CancellationPending
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.BackgroundWork.IBackgroundAlgorithmInfo.ReportProgress(System.Int32)">
-            <summary>
-            Notifies the main thread about progress
-            </summary>
-            <param name="percent">Progress in Percent (0-100)</param>
-        </member>
-        <member name="T:GeometryViewer.Util.BackgroundWork.BackgroundAlgorithmInfo">
-            <summary>
-            Info for a background worker called from inside the DoWork event
-            Implementation of the IBackgroundAlgorithmInfo interface
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.BackgroundAlgorithmInfo.CancellationPending">
-            <inheritdoc/>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.BackgroundAlgorithmInfo.Cancel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.BackgroundWork.BackgroundAlgorithmInfo.#ctor(System.ComponentModel.BackgroundWorker,System.ComponentModel.DoWorkEventArgs,System.Double,System.Double,System.String)">
-            <summary>
-            Initializes a new instance of the BackgroundAlgorithmInfo class
-            </summary>
-            <param name="worker">The worker whos executing the operation</param>
-            <param name="args">The EventArgs from the background workers DoWork event</param>
-            <param name="percentStart">Start progress for this part of the algorithm (0-100)</param>
-            <param name="percentEnd">Final progress for this part of the algorithm</param>
-            <param name="userText">The text displayed while this algorithm is working</param>
-        </member>
-        <member name="M:GeometryViewer.Util.BackgroundWork.BackgroundAlgorithmInfo.ReportProgress(System.Int32)">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.BackgroundWork.EmptyBackgroundAlgorithmInfo">
-            <summary>
-            Dummy implementation that does nothing
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.EmptyBackgroundAlgorithmInfo.CancellationPending">
-            <inheritdoc/>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.EmptyBackgroundAlgorithmInfo.Cancel">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.BackgroundWork.EmptyBackgroundAlgorithmInfo.ReportProgress(System.Int32)">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.BackgroundWork.BackgroundUserState">
-            <summary>
-            Stores additional data for the progress of background worker
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.BackgroundWork.BackgroundUserState.Text">
-            <summary>
-            Usertext displayed next to the title in the ui. Use this to describe which part of your algorithm is currently running.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.BackgroundWork.BackgroundUserState.#ctor(System.String)">
-            <summary>
-            Initializes a new instance of the BackgroundUserState class
-            </summary>
-            <param name="text">The text</param>
-        </member>
-        <member name="T:GeometryViewer.Util.ClipPlane">
-            <summary>
-            Describes a plane in Hessian normal form (ax + by + cz + d = 0) to clip against
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.ClipPlane.Normal">
-            <summary>
-            Normal of the plane (a, b, c)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.ClipPlane.Distance">
-            <summary>
-            Distance of the plane (d) from the origin (along the plane normal)
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.ClipPlane.#ctor(System.Windows.Media.Media3D.Vector3D,System.Double)">
-            <summary>
-            Initializes a new instance of the ClipPlane class from a given normal and distance
-            </summary>
-            <param name="normal">Normal of the plane</param>
-            <param name="distance">Distance from the origin along the normal</param>
-        </member>
-        <member name="M:GeometryViewer.Util.ClipPlane.#ctor(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Initializes a new instance of the ClipPlane class from a given normal and point on the plane 
-            </summary>
-            <param name="pointOnPlane">Point on the plane</param>
-            <param name="normal">Normal of the plane</param>
-        </member>
-        <member name="M:GeometryViewer.Util.ClipPlane.#ctor(GeometryViewer.Util.ClipPlane)">
-            <summary>
-            Copies the parameters of another clip plane
-            </summary>
-            <param name="plane">ClipPlane to copy</param>
-        </member>
-        <member name="M:GeometryViewer.Util.ClipPlane.IsInside(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Checks whether the given point lies inside (i.e. behind the plane according to its normal)
-            Point on the plane are considered as inside
-            </summary>
-            <param name="p">Point to test</param>
-            <returns>Returns true, if the point lies inside (behind the plane)</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.ClipPlane.IntersectLine(System.Windows.Media.Media3D.Point3D,System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Intersects the line given as (p1- p0) with this clip plane
-            </summary>
-            <param name="p0">Start point of the line</param>
-            <param name="p1">End point of the line</param>
-            <returns>
-            The intersection point and the distance t between start point and intersection point
-            If t is negative, the intersection point was not found
-            </returns>
-        </member>
-        <member name="T:GeometryViewer.Util.Frustum">
-            <summary>
-            Describes a 3D frustum enclosed by a list of clip planes
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Frustum.Planes">
-            <summary>
-            Clip planes defining the inside of the frustum as the intersection of inside half spaces 
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.Frustum.#ctor(System.Collections.Generic.List{GeometryViewer.Util.ClipPlane})">
-            <summary>
-            Initializes a new instance of this class with a set of clip planes
-            </summary>
-            <param name="clipPlanes"></param>
-        </member>
-        <member name="M:GeometryViewer.Util.Frustum.IsPointInside(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Checks whether a given point is contained in the frustum (i.e. the inside volume defined by the clip planes)
-            </summary>
-            <param name="p">Point to check</param>
-            <returns>True, if point is contained in the frustum volume</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.Frustum.IsNgonInside(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D},System.Boolean)">
-            <summary>
-            Tests if a polygon is entirely contained in the frustum.
-            The polygon is clipped against the frustum first before testing.
-            </summary>
-            <param name="ngon">Polygon to test</param>
-            <param name="allowPartially">If true, at least 1 vertex of the polygon has to remain in the frustum after clipping</param>
-            <returns>True, if the polygon is inside the frustum</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.Frustum.Clip(System.Collections.Generic.List{System.Windows.Media.Media3D.Point3D})">
-            <summary>
-            Clips the given polygon against all clip planes (performs Sutherland-Hodgman clipping)
-            </summary>
-            <param name="ngon">List of polygon vertices</param>
-            <returns>List of vertices resulting after clipping</returns>
-        </member>
-        <member name="T:GeometryViewer.Util.Matrix3DExtensions">
-            <summary>
-            Provides extension methods for the Matrix3D class
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Util.QuaternionExtensions">
-            <summary>
-            Common extensions or static methods for quaternions
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.QuaternionExtensions.CreateFromYawPitchRoll(System.Double,System.Double,System.Double)">
-            <summary>
-            Creates a quaternion from Euler angles (in deg)
-            https://en.wikipedia.org/wiki/Conversion_between_quaternions_and_Euler_angles
-            </summary>
-            <param name="yaw">Rotation around z-axis</param>
-            <param name="pitch">Rotation around y-axis</param>
-            <param name="roll">Rotation around x-axis</param>
-            <returns>Quaternion from Euler angles</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.QuaternionExtensions.CreateFromYawPitchRoll(System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Creates a quaternion from Euler angles (in deg), where x is roll, y is pitch and z is yaw
-            </summary>
-            <param name="eulerAngles">Euler angles (in deg)</param>
-            <returns>Quaternion from Euler angles</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.QuaternionExtensions.ToEulerAngles(System.Windows.Media.Media3D.Quaternion)">
-            <summary>
-            Converts this quaternion to Euler angles (in deg)
-            https://en.wikipedia.org/wiki/Conversion_between_quaternions_and_Euler_angles
-            </summary>
-            <param name="q"></param>
-            <returns></returns>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem">
-            <summary>
-            A group undo item that handles it's children in a batch-operation
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.Items">
-            <summary>
-            Returns a list of contained undo items. Do not change this after registering to the undo manager
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.Model">
-            <summary>
-            Stores the GeometryModel this undoitem operates on
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.#ctor(GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Initializes a new instance of the GroupUndoItem class
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.#ctor(GeometryViewer.Model.Geometry.GeometryModelData,System.Collections.Generic.List{SIMULTAN.Util.UndoRedo.IUndoItem})">
-            <summary>
-            Initializes a new instance of the GroupUndoItem class
-            </summary>
-            <param name="model">The model in which the batch operation is started</param>
-            <param name="items">The list of IUndoItems</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.BatchOperationGroupUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.CommunicationUndoItem">
-            <summary>
-            Undo item that shows/hides communication messages
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.CommunicationUndoItem.#ctor(GeometryViewer.Util.Communication.CommunicationMessage)">
-            <summary>
-            Initializes a new instance of the CommunicationUndoItem class
-            </summary>
-            <param name="message">The message that should be hidden or shown. Make sure to display the message in first place.</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.CommunicationUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.CommunicationUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.CommunicationUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.GeometryAddUndoItem">
-            <summary>
-            UndoItem  for undoing addition of geometries (for example, during connect or extrude)
-            The geoemtries have to be attached to the model already. They are NOT touched by Execute.
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.UndoRedo.GeometryAddUndoItem.CreatedGeometry">
-            <summary>
-            Returns the created geometry that is undone/redone by this item
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryAddUndoItem.#ctor(System.Collections.Generic.List{GeometryViewer.Model.Geometry.BaseGeometry},GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Initializes a new instance of the GeometryAddUndoItem class
-            </summary>
-            <param name="createdGeometry">The geomtries created by this instance. The geoemtries have to be attached to the model.</param>
-            <param name="model">The model on which add and remove should operate</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryAddUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryAddUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryAddUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.GeometryRemoveUndoItem">
-            <summary>
-            Removes previousely generated geometry. 
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.UndoRedo.GeometryRemoveUndoItem.DeletedGeometry">
-            <summary>
-            Returns the list of deleted geometries
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryRemoveUndoItem.#ctor(System.Collections.Generic.List{GeometryViewer.Model.Geometry.BaseGeometry},GeometryViewer.Model.Geometry.GeometryModelData)">
-            <summary>
-            Initializes a new instance of the GeometryRemoveUndoItem class
-            </summary>
-            <param name="deletedGeometry">The geomtries deleted by this instance. The geoemtries have to be removed from the model before attaching them here.</param>
-            <param name="model">The model on which add and remove should operate</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryRemoveUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryRemoveUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.GeometryRemoveUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.HoleRemoveUndoItem">
-            <summary>
-            Undo Item for removing a hole from a face
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.HoleRemoveUndoItem.#ctor(GeometryViewer.Model.Geometry.Face,GeometryViewer.Model.Geometry.EdgeLoop)">
-            <summary>
-            Initializes a new instance of the HoleRemoveUndoItem class. The hole has to be removed before creating the undo model
-            </summary>
-            <param name="face">The face from which the hole was removed</param>
-            <param name="hole">The removed hole</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.HoleRemoveUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.HoleRemoveUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.HoleRemoveUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.LayerReorderUndoItem">
-            <summary>
-            UndoItem for moving a layer to a new parent
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.UndoRedo.LayerReorderUndoItem.OldPos">
-            <summary>
-            The Old Position of the UndoItem. Used to correct sorting when multiple of these are
-            used in a GroupItem.
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerReorderUndoItem.#ctor(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Layer,System.Int32,GeometryViewer.Model.Geometry.Layer,System.Int32)">
-            <summary>
-            Initializes a new instance of the LayerReorderUndoItem class. The class handles reordering layers.
-            If used in a GroupUndoItem, soft descending by the OldPos property for correct undo.
-            </summary>
-            <param name="layer">The layer</param>
-            <param name="oldParent">The old parent (can be null when directly attached to a GeometryModel)</param>
-            <param name="oldPos">The old position (index) of the item in the original list.</param>
-            <param name="newParent">The new parent (can be null when directly attached to a GeometryModel)</param>
-            <param name="newPos">The new position (index) of the layer. Inserts at this index.</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerReorderUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerReorderUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerReorderUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.LayerMoveUndoItem">
-            <summary>
-            UndoItem for moving a layer to a new parent
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerMoveUndoItem.#ctor(GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Layer,GeometryViewer.Model.Geometry.Layer)">
-            <summary>
-            Initializes a new instance of the LayerMoveUndoItem class. The class handles the initial move
-            </summary>
-            <param name="layer">The layer</param>
-            <param name="oldParent">The old parent (can be null when directly attached to a GeometryModel)</param>
-            <param name="newParent">The new parent (can be null when directly attached to a GeometryModel)</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerMoveUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerMoveUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.LayerMoveUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.UndoRedo.ModelCompleteStateUndoItem">
-            <summary>
-            Undos a model operation by replacing the geometry in the model with an old state.
-            </summary>
-            Usage: Clone the model before the operation, perform the operation and pass the old state to the undo item
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.ModelCompleteStateUndoItem.#ctor(GeometryViewer.Model.Geometry.GeometryModelData,GeometryViewer.Model.GeometryModel)">
-            <summary>
-            Initializes a new instance of the ModelCompleteStateUndoItem class
-            </summary>
-            <param name="newGeometry">The new geometry data</param>
-            <param name="targetModel">An old geometry data</param>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.ModelCompleteStateUndoItem.Execute">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.ModelCompleteStateUndoItem.Redo">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.UndoRedo.ModelCompleteStateUndoItem.Undo">
-            <inheritdoc/>
-        </member>
-        <member name="T:GeometryViewer.Util.Communication.CommunicationAction">
-            <summary>
-            Stores a user-clickable action for a CommunicationMessage
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationAction.Text">
-            <summary>
-            Stores the display text of this Option
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationAction.Command">
-            <summary>
-            Stores the command that is called when the user selects this option
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationAction.Message">
-            <summary>
-            Gets or sets the Message this option belongs to (set automatically by the CommunicationMessage class)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationAction.IsSelected">
-            <summary>
-            Gets or sets whether this is the selected option
-            </summary>
-        </member>
-        <member name="E:GeometryViewer.Util.Communication.CommunicationAction.PropertyChanged">
-            <inheritdoc/>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationAction.#ctor(System.String,System.Action,System.Boolean)">
-            <summary>
-            Initializes a new instance of the CommunicationAction class
-            </summary>
-            <param name="text">The display text</param>
-            <param name="action">An action that is executed when the user selects this action</param>
-            <param name="isSelected">True when the option is selected, False otherwiseo</param>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationAction.#ctor(System.String,System.Action{GeometryViewer.Util.Communication.CommunicationAction},System.Boolean)">
-            <summary>
-            Initializes a new instance of the CommunicationAction class
-            </summary>
-            <param name="text">The display text</param>
-            <param name="action">A list of action that are executed when the user selects this action</param>
-            <param name="isSelected">True when the option is selected, False otherwiseo</param>
-        </member>
-        <member name="T:GeometryViewer.Util.Communication.CommunicationMessage">
-            <summary>
-            Stores a message that is sent to the user
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationMessage.Text">
-            <summary>
-            Returns the display text
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationMessage.MessageType">
-            <summary>
-            Returns the type of the message (determines only color at the moment)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationMessage.Actions">
-            <summary>
-            Stores a list of actions (can be empty)
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationMessage.VisibilityDuration">
-            <summary>
-            Stores how long the message will be visible to the user
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationMessage.#ctor(System.String,GeometryViewer.Util.Communication.MessageType,System.Nullable{System.TimeSpan},System.Collections.Generic.IEnumerable{GeometryViewer.Util.Communication.CommunicationAction})">
-            <summary>
-            Initializes a new instance of the CommunicationMessage class
-            </summary>
-            <param name="text">Display text</param>
-            <param name="type">Type of the message</param>
-            <param name="visibilityDuration">Time the message is displayed</param>
-            <param name="actions">List of actions that the user can choose from</param>
-        </member>
-        <member name="T:GeometryViewer.Util.Communication.MessageType">
-            <summary>
-            Type of messages
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Util.Communication.MessageType.Success">
-            <summary>
-            A success message
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Util.Communication.MessageType.Message">
-            <summary>
-            A normal message
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Util.Communication.MessageType.Warning">
-            <summary>
-            A warning
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Util.Communication.MessageType.Error">
-            <summary>
-            A error
-            </summary>
-        </member>
-        <member name="T:GeometryViewer.Util.Communication.CommunicationProvider">
-            <summary>
-            Provides methods to communication with the user
-            This class is a Singleton
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationProvider.Instance">
-            <summary>
-            Returns the current instance
-            </summary>
-        </member>
-        <member name="F:GeometryViewer.Util.Communication.CommunicationProvider.dispatcher">
-            <summary>
-            Dispatcher for displaying/modifying communication messages
-            </summary>
-        </member>
-        <member name="P:GeometryViewer.Util.Communication.CommunicationProvider.Messages">
-            <summary>
-            Returns a collection containing all messages
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationProvider.ShowMessage(System.String,GeometryViewer.Util.Communication.MessageType)">
-            <summary>
-            Shows a message to the user
-            </summary>
-            <param name="message">The message text</param>
-            <param name="type">Type of message</param>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationProvider.ShowMessage(System.String,GeometryViewer.Util.Communication.MessageType,System.Collections.Generic.IEnumerable{GeometryViewer.Util.Communication.CommunicationAction})">
-            <summary>
-            Shows a message to the user
-            </summary>
-            <param name="message">The message text</param>
-            <param name="type">Type of message</param>
-            <param name="actions">List of actions the user can choose from</param>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationProvider.ShowMessage(GeometryViewer.Util.Communication.CommunicationMessage)">
-            <summary>
-            Shows a message to the user
-            </summary>
-            <param name="message">The communication massage that should be displayed</param>
-        </member>
-        <member name="M:GeometryViewer.Util.Communication.CommunicationProvider.HideMessage(GeometryViewer.Util.Communication.CommunicationMessage)">
-            <summary>
-            Hides a message
-            </summary>
-            <param name="message">The message that should be hidden</param>
-        </member>
-        <member name="T:GeometryViewer.Util.PointVectorExtensions">
-            <summary>
-            Usefull extensions for the Point3D class
-            </summary>
-        </member>
-        <member name="M:GeometryViewer.Util.PointVectorExtensions.Multiply(System.Windows.Media.Media3D.Point3D,System.Double)">
-            <summary>
-            Multiplies the point with a scalar value
-            </summary>
-            <param name="p">The point</param>
-            <param name="d">The scalar</param>
-            <returns>The multiplied point</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.PointVectorExtensions.Divide(System.Windows.Media.Media3D.Point3D,System.Double)">
-            <summary>
-            Divides the point by a scalar value
-            </summary>
-            <param name="p">The point</param>
-            <param name="d">The scalar</param>
-            <returns>The divided point</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.PointVectorExtensions.XY(System.Windows.Media.Media3D.Point3D)">
-            <summary>
-            Returns a point containing only the X and Y coordinate
-            </summary>
-            <param name="p">Original point</param>
-            <returns>A point containing only X and Y coordinate</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.PointVectorExtensions.XY(System.Windows.Media.Media3D.Vector3D)">
-            <summary>
-            Returns a vector containing only the X and Y coordinate
-            </summary>
-            <param name="v">Original vector</param>
-            <returns>A vector containing only X and Y coordinate</returns>
-        </member>
-        <member name="M:GeometryViewer.Util.PointVectorExtensions.Get(System.Windows.Media.Media3D.Vector3D,System.Int32)">
-            <summary>
-            Returns a specific dimension of a Vector3D
-            </summary>
-            <param name="v">The Vector3D</param>
-            <param name="idx">Index of the dimension: X: 0, Y: 1, Z: 2</param>
-            <returns></returns>
-        </member>
-        <member name="M:GeometryViewer.Util.PointVectorExtensions.Get(System.Windows.Media.Media3D.Point3D,System.Int32)">
-            <summary>
-            Returns a specific dimension of a Point3D
-            </summary>
-            <param name="v">The Point3D</param>
-            <param name="idx">Index of the dimension: X: 0, Y: 1, Z: 2</param>
-            <returns></returns>
-        </member>
-    </members>
-</doc>