Nuitka-winsvc 2.7.7__cp313-cp313-win_amd64.whl

nuitka/build/inline_copy/lib/scons-4.3.0/SCons/Script/Interactive.py

@@ -0,0 +1,372 @@
+# MIT License
+#
+# Copyright The SCons Foundation
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+# KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
+# WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+"""SCons interactive mode. """
+
+# TODO:
+#
+# This has the potential to grow into something with a really big life
+# of its own, which might or might not be a good thing.  Nevertheless,
+# here are some enhancements that will probably be requested some day
+# and are worth keeping in mind (assuming this takes off):
+# 
+# - A command to re-read / re-load the SConscript files.  This may
+#   involve allowing people to specify command-line options (e.g. -f,
+#   -I, --no-site-dir) that affect how the SConscript files are read.
+#
+# - Additional command-line options on the "build" command.
+#
+#   Of the supported options that seemed to make sense (after a quick
+#   pass through the list), the ones that seemed likely enough to be
+#   used are listed in the man page and have explicit test scripts.
+#
+#   These had code changed in Script/Main.py to support them, but didn't
+#   seem likely to be used regularly, so had no test scripts added:
+#
+#       build --diskcheck=*
+#       build --implicit-cache=*
+#       build --implicit-deps-changed=*
+#       build --implicit-deps-unchanged=*
+#
+#   These look like they should "just work" with no changes to the
+#   existing code, but like those above, look unlikely to be used and
+#   therefore had no test scripts added:
+#
+#       build --random
+#
+#   These I'm not sure about.  They might be useful for individual
+#   "build" commands, and may even work, but they seem unlikely enough
+#   that we'll wait until they're requested before spending any time on
+#   writing test scripts for them, or investigating whether they work.
+#
+#       build -q [???  is there a useful analog to the exit status?]
+#       build --duplicate=
+#       build --profile=
+#       build --max-drift=
+#       build --warn=*
+#       build --Y
+#
+# - Most of the SCons command-line options that the "build" command
+#   supports should be settable as default options that apply to all
+#   subsequent "build" commands.  Maybe a "set {option}" command that
+#   maps to "SetOption('{option}')".
+#
+# - Need something in the 'help' command that prints the -h output.
+#
+# - A command to run the configure subsystem separately (must see how
+#   this interacts with the new automake model).
+#
+# - Command-line completion of target names; maybe even of SCons options?
+#   Completion is something that's supported by the Python cmd module,
+#   so this should be doable without too much trouble.
+#
+
+import cmd
+import copy
+import os
+import re
+import shlex
+import sys
+
+try:
+    import readline
+except ImportError:
+    pass
+
+class SConsInteractiveCmd(cmd.Cmd):
+    """\
+
+build [TARGETS]         Build the specified TARGETS and their dependencies. 'b' is a synonym.
+clean [TARGETS]         Clean (remove) the specified TARGETS and their dependencies.  'c' is a synonym.
+exit                    Exit SCons interactive mode.
+help [COMMAND]          Prints help for the specified COMMAND.  'h' and '?' are synonyms.
+shell [COMMANDLINE]     Execute COMMANDLINE in a subshell.  'sh' and '!' are synonyms.
+version                 Prints SCons version information.
+"""
+
+    synonyms = {
+        'b'     : 'build',
+        'c'     : 'clean',
+        'h'     : 'help',
+        'scons' : 'build',
+        'sh'    : 'shell',
+    }
+
+    def __init__(self, **kw):
+        cmd.Cmd.__init__(self)
+        for key, val in kw.items():
+            setattr(self, key, val)
+
+        if sys.platform == 'win32':
+            self.shell_variable = 'COMSPEC'
+        else:
+            self.shell_variable = 'SHELL'
+
+    def default(self, argv):
+        print("*** Unknown command: %s" % argv[0])
+
+    def onecmd(self, line):
+        line = line.strip()
+        if not line:
+            print(self.lastcmd)
+            return self.emptyline()
+        self.lastcmd = line
+        if line[0] == '!':
+            line = 'shell ' + line[1:]
+        elif line[0] == '?':
+            line = 'help ' + line[1:]
+        if os.sep == '\\':
+            line = line.replace('\\', '\\\\')
+        argv = shlex.split(line)
+        argv[0] = self.synonyms.get(argv[0], argv[0])
+        if not argv[0]:
+            return self.default(line)
+        else:
+            try:
+                func = getattr(self, 'do_' + argv[0])
+            except AttributeError:
+                return self.default(argv)
+            return func(argv)
+
+    def do_build(self, argv):
+        """\
+        build [TARGETS]         Build the specified TARGETS and their
+                                dependencies.  'b' is a synonym.
+        """
+        import SCons.Node
+        import SCons.SConsign
+        import SCons.Script.Main
+
+        options = copy.deepcopy(self.options)
+
+        options, targets = self.parser.parse_args(argv[1:], values=options)
+
+        SCons.Script.COMMAND_LINE_TARGETS = targets
+
+        if targets:
+            SCons.Script.BUILD_TARGETS = targets
+        else:
+            # If the user didn't specify any targets on the command line,
+            # use the list of default targets.
+            SCons.Script.BUILD_TARGETS = SCons.Script._build_plus_default
+
+        nodes = SCons.Script.Main._build_targets(self.fs,
+                                                 options,
+                                                 targets,
+                                                 self.target_top)
+
+        if not nodes:
+            return
+
+        # Call each of the Node's alter_targets() methods, which may
+        # provide additional targets that ended up as part of the build
+        # (the canonical example being a VariantDir() when we're building
+        # from a source directory) and which we therefore need their
+        # state cleared, too.
+        x = []
+        for n in nodes:
+            x.extend(n.alter_targets()[0])
+        nodes.extend(x)
+
+        # Clean up so that we can perform the next build correctly.
+        #
+        # We do this by walking over all the children of the targets,
+        # and clearing their state.
+        #
+        # We currently have to re-scan each node to find their
+        # children, because built nodes have already been partially
+        # cleared and don't remember their children.  (In scons
+        # 0.96.1 and earlier, this wasn't the case, and we didn't
+        # have to re-scan the nodes.)
+        #
+        # Because we have to re-scan each node, we can't clear the
+        # nodes as we walk over them, because we may end up rescanning
+        # a cleared node as we scan a later node.  Therefore, only
+        # store the list of nodes that need to be cleared as we walk
+        # the tree, and clear them in a separate pass.
+        #
+        # XXX: Someone more familiar with the inner workings of scons
+        # may be able to point out a more efficient way to do this.
+
+        SCons.Script.Main.progress_display("scons: Clearing cached node information ...")
+
+        seen_nodes = {}
+
+        def get_unseen_children(node, parent, seen_nodes=seen_nodes):
+            def is_unseen(node, seen_nodes=seen_nodes):
+                return node not in seen_nodes
+            return [child for child in node.children(scan=1) if is_unseen(child)]
+
+        def add_to_seen_nodes(node, parent, seen_nodes=seen_nodes):
+            seen_nodes[node] = 1
+
+            # If this file is in a VariantDir and has a
+            # corresponding source file in the source tree, remember the
+            # node in the source tree, too.  This is needed in
+            # particular to clear cached implicit dependencies on the
+            # source file, since the scanner will scan it if the
+            # VariantDir was created with duplicate=0.
+            try:
+                rfile_method = node.rfile
+            except AttributeError:
+                return
+            else:
+                rfile = rfile_method()
+            if rfile != node:
+                seen_nodes[rfile] = 1
+
+        for node in nodes:
+            walker = SCons.Node.Walker(node,
+                                        kids_func=get_unseen_children,
+                                        eval_func=add_to_seen_nodes)
+            n = walker.get_next()
+            while n:
+                n = walker.get_next()
+
+        for node in seen_nodes.keys():
+            # Call node.clear() to clear most of the state
+            node.clear()
+            # node.clear() doesn't reset node.state, so call
+            # node.set_state() to reset it manually
+            node.set_state(SCons.Node.no_state)
+            node.implicit = None
+
+            # Debug:  Uncomment to verify that all Taskmaster reference
+            # counts have been reset to zero.
+            #if node.ref_count != 0:
+            #    from SCons.Debug import Trace
+            #    Trace('node %s, ref_count %s !!!\n' % (node, node.ref_count))
+
+        SCons.SConsign.Reset()
+        SCons.Script.Main.progress_display("scons: done clearing node information.")
+
+    def do_clean(self, argv):
+        """\
+        clean [TARGETS]         Clean (remove) the specified TARGETS
+                                and their dependencies.  'c' is a synonym.
+        """
+        return self.do_build(['build', '--clean'] + argv[1:])
+
+    def do_EOF(self, argv):
+        print()
+        self.do_exit(argv)
+
+    def _do_one_help(self, arg):
+        try:
+            # If help_<arg>() exists, then call it.
+            func = getattr(self, 'help_' + arg)
+        except AttributeError:
+            try:
+                func = getattr(self, 'do_' + arg)
+            except AttributeError:
+                doc = None
+            else:
+                doc = self._doc_to_help(func)
+            if doc:
+                sys.stdout.write(doc + '\n')
+                sys.stdout.flush()
+        else:
+            doc = self.strip_initial_spaces(func())
+            if doc:
+                sys.stdout.write(doc + '\n')
+                sys.stdout.flush()
+
+    def _doc_to_help(self, obj):
+        doc = obj.__doc__
+        if doc is None:
+            return ''
+        return self._strip_initial_spaces(doc)
+
+    def _strip_initial_spaces(self, s):
+        lines = s.split('\n')
+        spaces = re.match(' *', lines[0]).group(0)
+        def strip_spaces(l, spaces=spaces):
+            if l[:len(spaces)] == spaces:
+                l = l[len(spaces):]
+            return l
+        lines = list(map(strip_spaces, lines))
+        return '\n'.join(lines)
+
+    def do_exit(self, argv):
+        """\
+        exit                    Exit SCons interactive mode.
+        """
+        sys.exit(0)
+
+    def do_help(self, argv):
+        """\
+        help [COMMAND]          Prints help for the specified COMMAND.  'h'
+                                and '?' are synonyms.
+        """
+        if argv[1:]:
+            for arg in argv[1:]:
+                if self._do_one_help(arg):
+                    break
+        else:
+            # If bare 'help' is called, print this class's doc
+            # string (if it has one).
+            doc = self._doc_to_help(self.__class__)
+            if doc:
+                sys.stdout.write(doc + '\n')
+                sys.stdout.flush()
+
+    def do_shell(self, argv):
+        """\
+        shell [COMMANDLINE]     Execute COMMANDLINE in a subshell.  'sh' and
+                                '!' are synonyms.
+        """
+        import subprocess
+        argv = argv[1:]
+        if not argv:
+            argv = os.environ[self.shell_variable]
+        try:
+            # Per "[Python-Dev] subprocess insufficiently platform-independent?"
+            # http://mail.python.org/pipermail/python-dev/2008-August/081979.html "+
+            # Doing the right thing with an argument list currently
+            # requires different shell= values on Windows and Linux.
+            p = subprocess.Popen(argv, shell=(sys.platform=='win32'))
+        except EnvironmentError as e:
+            sys.stderr.write('scons: %s: %s\n' % (argv[0], e.strerror))
+        else:
+            p.wait()
+
+    def do_version(self, argv):
+        """\
+        version                 Prints SCons version information.
+        """
+        sys.stdout.write(self.parser.version + '\n')
+
+def interact(fs, parser, options, targets, target_top):
+    c = SConsInteractiveCmd(prompt = 'scons>>> ',
+                            fs = fs,
+                            parser = parser,
+                            options = options,
+                            targets = targets,
+                            target_top = target_top)
+    c.cmdloop()
+
+# Local Variables:
+# tab-width:4
+# indent-tabs-mode:nil
+# End:
+# vim: set expandtab tabstop=4 shiftwidth=4: