JoyPi-RGB-Matrix-RaspberryPi 1.0.0__py3-none-any.whl → 1.0.2__py3-none-any.whl

JoyPi_RGB_Matrix_RaspberryPi/RGB_Matrix.py

@@ -1,13 +1,14 @@
 from ._RGBW import RGBW
 from ._PixelStrip import PixelStrip
 import time
+import busio
 
 class RGB_Matrix:
     """
     New version using the I2C-based PixelStrip instead of rpi_ws281x.
     """
 
-    def __init__(self, bus = None, bus_id = 1, i2c_adress = 0x66, count = 64, brightness = 10, 
+    def __init__(self, i2c: busio.I2C, i2c_adress = 0x66, count = 64, brightness = 10, 
                  right_border = [7,15,23,31,39,47,55,63], left_border = [0,8,16,24,32,40,48,56]):
         """
         initiliaze LED matrix
@@ -26,8 +27,7 @@ class RGB_Matrix:
         self.LEFT_BORDER  = left_border
 
         # Create the I2C-based PixelStrip instance
-        self.strip = PixelStrip(num=self.LED_COUNT, brightness=self.LED_BRIGHTNESS,
-                                bus = bus, bus_id = bus_id, i2c_adress=i2c_adress)
+        self.strip = PixelStrip(num=self.LED_COUNT, i2c=i2c, brightness=self.LED_BRIGHTNESS, i2c_adress=i2c_adress)
         self.strip.begin()
 
     def clean(self):
@@ -51,7 +51,7 @@ class RGB_Matrix:
         
         :param colour: RGBW value 32 bit integer
         """
-        for i in range(self.strip.numPixels()):
+        for i in range(self.strip.getNumPixels()):
             self.strip.setPixelColor(i, colour)
         self.strip.show()
 
@@ -59,7 +59,7 @@ class RGB_Matrix:
         """
         turn all LEDs in matrix off
         """
-        for i in range(self.strip.numPixels()):
+        for i in range(self.strip.getNumPixels()):
             self.strip.setPixelColor(i, RGBW(0, 0, 0, 0))
         self.strip.show()
 
@@ -86,7 +86,7 @@ class RGB_Matrix:
         :param iterations: iterations of animation
         """
         for j in range(256 * iterations):
-            for i in range(self.strip.numPixels()):
+            for i in range(self.strip.getNumPixels()):
                 self.strip.setPixelColor(i, self.wheel((i + j) & 255))
             self.strip.show()
             time.sleep(wait_ms / 1000.0)
@@ -98,7 +98,7 @@ class RGB_Matrix:
         :param color: RGB value to set pixels to
         :param wait_ms: time between each pixel
         """
-        for i in range(self.strip.numPixels()):
+        for i in range(self.strip.getNumPixels()):
             self.strip.setPixelColor(i, color)
             self.strip.show()
             time.sleep(wait_ms / 1000.0)
@@ -113,11 +113,11 @@ class RGB_Matrix:
         """
         for j in range(iterations):
             for q in range(3):
-                for i in range(0, self.strip.numPixels(), 3):
+                for i in range(0, self.strip.getNumPixels(), 3):
                     self.strip.setPixelColor(i + q, color)
                 self.strip.show()
                 time.sleep(wait_ms / 1000.0)
-                for i in range(0, self.strip.numPixels(), 3):
+                for i in range(0, self.strip.getNumPixels(), 3):
                     self.strip.setPixelColor(i + q, 0)
 
     def demo1(self):
@@ -151,4 +151,19 @@ class RGB_Matrix:
                     self.strip.setPixelColor(i, RGBW(255, 0, 0, 0))
                 self.strip.show()
         except KeyboardInterrupt:
-            self.clean()
+            self.clean()
+    
+    def setBrightness(self, brightness):
+        """
+        Set brightness of all pixels
+
+        :param brightness: brightness level (0-255)
+        """
+        self.strip.setBrightness(brightness)
+        self.strip.show()
+    
+    def getPixelNum(self):
+        """
+        Get number of pixels in matrix
+        """
+        return self.strip.getNumPixels()

JoyPi_RGB_Matrix_RaspberryPi/_PixelStrip.py

@@ -1,6 +1,7 @@
 from ._LEDTransferData import LEDTransferData
 from enum import Enum
-import smbus2
+import busio
+from adafruit_bus_device import i2c_device
 import time
 
 class FunctionEnum(Enum):
@@ -16,26 +17,25 @@ class FunctionEnum(Enum):
     SETPIXELCOLOR       = 1
     FILL                = 2
     SETBRIGHTNESS       = 3
-    WHITEOVERRAINBOW    = 4
-    GAMMA8              = 5
-    GAMMA32             = 6
-    NUMPIXEL            = 7
-    COLORHSV            = 8
-    CLEAR               = 9
-    SENDDATA2SHOW       = 10
-    SENDALLPIXRGB0      = 11
-    SENDALLPIXRGB1      = 12
-    SENDALLPIXRGB2      = 13
-    SENDALLPIXRGB3      = 14
-    SENDALLPIXRGB4      = 15
-    SENDALLPIXRGB5      = 16
+    GAMMA8              = 4
+    GAMMA32             = 5
+    NUMPIXEL            = 6
+    COLORHSV            = 7
+    CLEAR               = 8
+    SENDDATA2SHOW       = 9
+    SENDALLPIXRGB0      = 10
+    SENDALLPIXRGB1      = 11
+    SENDALLPIXRGB2      = 12
+    SENDALLPIXRGB3      = 13
+    SENDALLPIXRGB4      = 14
+    SENDALLPIXRGB5      = 15
 
 class PixelStrip:
     """
     Controls a strip of LEDs (WS281x / SK6812) via I2C.
     """
 
-    def __init__(self, num, brightness=255, bus = None, bus_id = 1, i2c_adress = 0x66):
+    def __init__(self, num, i2c: busio.I2C, brightness=255, i2c_adress = 0x66):
         """
         initilize LED controll class
         
@@ -43,8 +43,8 @@ class PixelStrip:
         :param brightness: brightness of all pixels
         """
         self.num = num
-        self.bus = bus if bus is not None else smbus2.SMBus(bus_id)
-        self.Address = i2c_adress
+        self.address = i2c_adress
+        self.device = i2c_device.I2CDevice(i2c, self.address)
         self.transfer_data = LEDTransferData()
         self.transfer_data.setBright(brightness)
 
@@ -61,25 +61,45 @@ class PixelStrip:
 
         :param cmd: block of data to send
         """
-        self.bus.write_block_data(
-            self.Address, cmd, [
-                self.transfer_data.func,
-                self.transfer_data.pos,
-                self.transfer_data.r,
-                self.transfer_data.g,
-                self.transfer_data.b,
-                self.transfer_data.w,
-                self.transfer_data.c,
-                self.transfer_data.bright,
-                self.transfer_data.first,
-                self.transfer_data.count,
-                self.transfer_data.data,
-                self.transfer_data.data1
-            ]
-        )
+        data = bytes([
+            cmd & 0xFF,
+            0x0C,
+            self.transfer_data.func & 0xFF,
+            self.transfer_data.pos & 0xFF,
+            self.transfer_data.r & 0xFF,
+            self.transfer_data.g & 0xFF,
+            self.transfer_data.b & 0xFF,
+            self.transfer_data.w & 0xFF,
+            self.transfer_data.c & 0xFF,
+            self.transfer_data.bright & 0xFF,
+            self.transfer_data.first & 0xFF,
+            self.transfer_data.count & 0xFF,
+            self.transfer_data.data & 0xFF,
+            self.transfer_data.data1 & 0xFF,
+        ])
+        with self.device as bus_device:
+            bus_device.write(data)
         time.sleep(0.003)  # Hardware timing delay
         self.transfer_data.clean()
 
+    def _write(self, cmd, data):
+        """
+        Send a command byte followed by a data block
+        """
+        buffer = bytes([cmd & 0xFF, len(data) & 0xFF] + [value & 0xFF for value in data])
+        with self.device as bus_device:
+            bus_device.write(buffer)
+        time.sleep(0.003)
+
+    def _read(self):
+        """
+        Read one byte from the I2C device
+        """
+        data = bytearray(1)
+        with self.device as bus_device:
+            bus_device.readinto(data)
+        return data[0]
+    
     def __len__(self):
         """
         Return the total number of pixels
@@ -205,11 +225,7 @@ class PixelStrip:
         for i in range(6):
             start = 32 * i
             end = start + 32
-            self.bus.write_block_data(
-                self.Address,
-                FunctionEnum.SENDALLPIXRGB0.value + i,
-                rgb[start:end]
-            )
+            self._write( FunctionEnum.SENDALLPIXRGB0.value + i, rgb[start:end])
 
     def fill(self, r=0, g=0, b=0, w=0, first=0, end=64):
         """
@@ -252,7 +268,7 @@ class PixelStrip:
         self.transfer_data.setFunc(FunctionEnum.SETBRIGHTNESS.value)
         self.send(0x00)
 
-    def numPixels(self):
+    def getNumPixels(self):
         """
         Return the number of pixels in this strip
         """
@@ -267,7 +283,7 @@ class PixelStrip:
         self.transfer_data.setFunc(FunctionEnum.GAMMA8.value)
         self.transfer_data.setData(x)
         self.send(0x01)
-        return self.bus.read_byte(self.Address)
+        return self._read()
 
     def getGamma32(self, x):
         """
@@ -278,9 +294,9 @@ class PixelStrip:
         self.transfer_data.setFunc(FunctionEnum.GAMMA32.value)
         self.transfer_data.setData(x)
         self.send(0x01)
-        return self.bus.read_byte(self.Address)
+        return self._read()
 
-    def ColorHSV(self, x):
+    def getColorHSV(self, x):
         """
         Converts an HSV color value into the device-specific RGB format.
 
@@ -289,4 +305,4 @@ class PixelStrip:
         self.transfer_data.setFunc(FunctionEnum.COLORHSV.value)
         self.transfer_data.setData(x)
         self.send(0x01)
-        return self.bus.read_byte(self.Address)
+        return self._read()

{joypi_rgb_matrix_raspberrypi-1.0.0.dist-info → joypi_rgb_matrix_raspberrypi-1.0.2.dist-info}/METADATA

@@ -1,6 +1,6 @@
-Metadata-Version: 2.4
+Metadata-Version: 2.5
 Name: JoyPi_RGB_Matrix_RaspberryPi
-Version: 1.0.0
+Version: 1.0.2
 Summary: This library enables usage of RGB matrix with RP2040 microcontroller chip on the Raspberry Pi.
 Project-URL: Homepage, https://github.com/joy-it/JoyPi_RGB_Matrix_RaspberryPi
 Project-URL: Issues, https://github.com/joy-it/JoyPi_RGB_Matrix_RaspberryPi/issues
@@ -20,13 +20,15 @@ This library enables usage of RGB matrix with RP2040 microcontroller chip on the
 ## Installation
 You can install this library from PyPI.
 To install it for the current user on your Raspberry Pi, use the following command:
-```
-pip install JoyPi_RGB_Matrix_RaspberryPi
+```bash
+pip install JoyPi-RGB-Matrix-RaspberryPi
 ```
 
 ## Library Guide
 - `LEDMatrix( count = 64, brightness = 10, right_border = [7,15,23,31,39,47,55,63], left_border = [0,8,16,24,32,40,48,56])`- initialize LED matrix with default values for Joy-Pi
 - `clean()` - clears the LED matrix
+- `setBrightness(brightness)` - set brightness to a certain level (0-255)
+- `getPixelNum()` - returns number of pixel of led matrix
 - `setPixel(position, colour)` - sets specific pixel to a selected colour
 - `RGB_on(colour)` - sets the complete matrix to one selected colour
 - `RGB_off()` - turns the complete matrix off

joypi_rgb_matrix_raspberrypi-1.0.2.dist-info/RECORD

@@ -0,0 +1,9 @@
+JoyPi_RGB_Matrix_RaspberryPi/RGB_Matrix.py,sha256=1gmJGBovYm2o-J4rjJfhAq4wofTCCYSn65Phth2vAK8,5468
+JoyPi_RGB_Matrix_RaspberryPi/_LEDTransferData.py,sha256=pFT0s87GIUvcorLBMoP6SaVyG1a4VFFd3ZFemH0SvIw,4612
+JoyPi_RGB_Matrix_RaspberryPi/_PixelStrip.py,sha256=Yqy-M1nz0EuEEyvW0_ZasFrRZ0HQLK1QlhyVP1Za_Fg,10077
+JoyPi_RGB_Matrix_RaspberryPi/_RGBW.py,sha256=EcaedZUnIVB30MQiqcV5YPxvjxWJKUdMZLnERE1nLho,1577
+JoyPi_RGB_Matrix_RaspberryPi/__init__.py,sha256=TmM6J8HmbztmrjNjyOO3-xGrS1FeNlc0TZKVW7do4mA,62
+joypi_rgb_matrix_raspberrypi-1.0.2.dist-info/METADATA,sha256=0awiueBo8K7N2x7Td2qP44ZKShFlarO0Xb4L9EWnFIw,2187
+joypi_rgb_matrix_raspberrypi-1.0.2.dist-info/WHEEL,sha256=W3fkpkm7-wf9vBI5Z-7s0eWkeM-spu78I8Neb98DeEg,87
+joypi_rgb_matrix_raspberrypi-1.0.2.dist-info/licenses/LICENSE,sha256=huySC1quQxrIchKLo7iaLAiFssUwfkKHjAEcXDJ5XXk,1085
+joypi_rgb_matrix_raspberrypi-1.0.2.dist-info/RECORD,,

{joypi_rgb_matrix_raspberrypi-1.0.0.dist-info → joypi_rgb_matrix_raspberrypi-1.0.2.dist-info}/WHEEL

@@ -1,4 +1,4 @@
 Wheel-Version: 1.0
-Generator: hatchling 1.28.0
+Generator: hatchling 1.32.4
 Root-Is-Purelib: true
 Tag: py3-none-any

joypi_rgb_matrix_raspberrypi-1.0.0.dist-info/RECORD

@@ -1,9 +0,0 @@
-JoyPi_RGB_Matrix_RaspberryPi/RGB_Matrix.py,sha256=u3bVOw9-weDAANFtf3VnPQMWbJRDDDm86cMlezzUvbM,5114
-JoyPi_RGB_Matrix_RaspberryPi/_LEDTransferData.py,sha256=pFT0s87GIUvcorLBMoP6SaVyG1a4VFFd3ZFemH0SvIw,4612
-JoyPi_RGB_Matrix_RaspberryPi/_PixelStrip.py,sha256=Ogmkn6v5e2GfzOG2qiYrwVhBVukL4JRTNMklIsXcEEI,9584
-JoyPi_RGB_Matrix_RaspberryPi/_RGBW.py,sha256=EcaedZUnIVB30MQiqcV5YPxvjxWJKUdMZLnERE1nLho,1577
-JoyPi_RGB_Matrix_RaspberryPi/__init__.py,sha256=TmM6J8HmbztmrjNjyOO3-xGrS1FeNlc0TZKVW7do4mA,62
-joypi_rgb_matrix_raspberrypi-1.0.0.dist-info/METADATA,sha256=-UXhIi_ysnCUTmjU3gak8aByBLDyoZNLuxRF9LQ6X-M,2051
-joypi_rgb_matrix_raspberrypi-1.0.0.dist-info/WHEEL,sha256=WLgqFyCfm_KASv4WHyYy0P3pM_m7J5L9k2skdKLirC8,87
-joypi_rgb_matrix_raspberrypi-1.0.0.dist-info/licenses/LICENSE,sha256=huySC1quQxrIchKLo7iaLAiFssUwfkKHjAEcXDJ5XXk,1085
-joypi_rgb_matrix_raspberrypi-1.0.0.dist-info/RECORD,,