DLMS-SPODES 0.87.12__py3-none-any.whl → 0.87.15__py3-none-any.whl

DLMS_SPODES/__init__.py

@@ -1,6 +1,6 @@
-from . import settings
-from .cosem_interface_classes import collection
-from importlib.metadata import version
-from .pardata import ParData
-
-__version__ = version("DLMS_SPODES")
+from . import settings
+from .cosem_interface_classes import collection
+from importlib.metadata import version
+from .pardata import ParData
+
+__version__ = version("DLMS_SPODES")

DLMS_SPODES/configEN.ini

@@ -1,126 +1,126 @@
-[values.common]
-reserved = reserved
-
-[values.prefix]
-kilo = k
-
-[values.enum]
-# cdt.units
-time_year = a
-time_month = mo
-time_week = wk
-time_day = d
-time_hour = h
-time_minute = min
-time_second = s
-phase_angle_degree = °
-temperature = °c
-local_currency = currency
-length_metre = m
-speed_metre_per_second = m/s
-volume_value_cubic_metre = m³
-corrected_volume_cubic_metre = m³*
-volume_flux_cubic_metre_per_hour = m³/h
-corrected_volume_flux_cubic_metre_per_hour = m³/h*
-volume_flux_cubic_metre_per_day = m³/d
-corrected_volume_flux_cubic_metre_per_day = m³/d
-volume_litre = l
-mass_kilogram = kg
-force_newton = n
-energy_newton_meter = nm
-pressure_pascal = pa
-pressure_bar = bar
-energy_joule = j
-thermal_power_rate_of_change_joule_per_hour = j/h
-active_power_watt = w
-apparent_power_volt_ampere = va
-reactive_power_var = var
-active_energy_value_watt_hour = wh
-apparent_energy_value_volt_ampere_hour = vah
-reactive_energy_value_var_hour = varh
-current_ampere = a
-electrical_charge_coulomb = c
-voltage_volt = v
-electric_field_strength_volt_per_metre = v/m
-capacitance_farad = f
-resistance_ohm = ω
-resistivity = ωm²/m
-magnetic_flux_weber = wb
-magnetic_flux_density_tesla = t
-magnetic_field_strength_ampere_per_metre = a/m
-inductance_henry = h
-frequency_hertz = hz
-rw_active_energy_value = 1/(wh)
-rb_reactive_energy_value = 1/(varh)
-rs_apparent_energy_value = 1/(vah)
-volt_squared_hour_volt_squared_hour_meter = v²h
-ampere_squared_hour = a²h
-mass_flux_kilogram_per_second = kg/s
-conductance_siemens = s, mho
-temperature_kelvin = k
-ru2h_volt_squared_hour_meter = 1/(v²h)
-ri2h_ampere_squared_hour_meter = 1/(a²h)
-rv_meter = 1/m³
-percentage = %%
-ampere_hours = ah
-energy_per_volume = wh/m³
-calorific_value_wobbe = j/m³
-molar_fraction_of_gas_composition_mole_percent = mol %%
-mass_density_quantity_of_material = g/m³
-dynamic_viscosity_pascal_second = pa s
-specific_energy_joule_kilogram = j/kg
-pressure_gram_per_square_centimeter = g/cm²
-pressure_atmosphere = atm
-signal_strength_milliwatt = dbm
-signal_strength_microvolt = dbµv
-logarithmic_unit = db
-length_inch = in
-length_foot = ft
-mass_pound = lb
-temperature_fahrenheit = °f
-temperature_rankine = °r
-area_square_inch = sq. in
-area_square_foot = sq ft
-area_acre = ac
-volume_cubic_inch = cu in
-volume_cubic_foot = cu ft
-volume_acre_foot = ac ft
-volume_gallon_imperial = gal(imp)
-volume_gallon_us = gal(us)
-force_pound_force = lbf
-pressure_pound_force_per_square_inch = psi
-density_pound_per_cubic_foot = lb/cu ft
-dynamic_viscosity = lb/(ft .s)
-kinematic_viscosity_square_foot_per_second = sq ft/s
-energy_british_thermal_unit = btu
-energy_therm_eu = thm(ec)
-energy_therm_us = thm(us)
-calorific_value_of_mass_lenthalpy = btu/lb
-calorific_value_of_volume_wobbe = btu/cu ft
-volume_meter_cubic_feet_rv = cu ft rv
-speed_foot_per_second = ft/s
-volume_flux_cubic_foot_per_second = cu ft/s
-volume_flux_cubic_foot_per_min = cu ft/min
-volume_flux_cubic_foot_per_hour = cu ft/h
-volume_flux_cubic_foot_per_day = cu ft/d
-volume_flux_acre_foot_per_second = ac ft/s
-volume_flux_acre_foot_per_min = ac ft/min
-volume_flux_acre_foot_per_hour = ac ft/h
-volume_flux_acre_foot_per_day = ac ft/d
-volume_imperial_gallon_meter_rv = gal(imp) rv
-volume_flux_imperial_gallon_per_second = gal(imp)/s
-volume_flux_imperial_gallon_per_min = gal(imp)/min
-volume_flux_imperial_gallon_per_hour = gal(imp)/h
-volume_flux_imperial_gallon_per_day = gal(imp)/d
-volume_us_gallon_rv = gal(us) rv
-volume_flux_us_gallon_per_second = gal(us)/s
-volume_flux_us_gallon_per_min = gal(us)/min
-volume_flux_us_gallon_per_hour = gal(us)/h
-volume_flux_us_gallon_per_day = gal(us)/d
-energy_flow_british_thermal_unit_per_second = btu/s
-energy_flow_british_thermal_unit_per_minute = btu/min
-energy_flow_british_thermal_unit_per_hour = btu/h
-energy_flow_british_thermal_unit_per_day = btu/d
-extended_table_of_units = extended
-other_unit = other
-no_unit_unitless_count = count
+[values.common]
+reserved = reserved
+
+[values.prefix]
+kilo = k
+
+[values.enum]
+# cdt.units
+time_year = a
+time_month = mo
+time_week = wk
+time_day = d
+time_hour = h
+time_minute = min
+time_second = s
+phase_angle_degree = °
+temperature = °c
+local_currency = currency
+length_metre = m
+speed_metre_per_second = m/s
+volume_value_cubic_metre = m³
+corrected_volume_cubic_metre = m³*
+volume_flux_cubic_metre_per_hour = m³/h
+corrected_volume_flux_cubic_metre_per_hour = m³/h*
+volume_flux_cubic_metre_per_day = m³/d
+corrected_volume_flux_cubic_metre_per_day = m³/d
+volume_litre = l
+mass_kilogram = kg
+force_newton = n
+energy_newton_meter = nm
+pressure_pascal = pa
+pressure_bar = bar
+energy_joule = j
+thermal_power_rate_of_change_joule_per_hour = j/h
+active_power_watt = w
+apparent_power_volt_ampere = va
+reactive_power_var = var
+active_energy_value_watt_hour = wh
+apparent_energy_value_volt_ampere_hour = vah
+reactive_energy_value_var_hour = varh
+current_ampere = a
+electrical_charge_coulomb = c
+voltage_volt = v
+electric_field_strength_volt_per_metre = v/m
+capacitance_farad = f
+resistance_ohm = ω
+resistivity = ωm²/m
+magnetic_flux_weber = wb
+magnetic_flux_density_tesla = t
+magnetic_field_strength_ampere_per_metre = a/m
+inductance_henry = h
+frequency_hertz = hz
+rw_active_energy_value = 1/(wh)
+rb_reactive_energy_value = 1/(varh)
+rs_apparent_energy_value = 1/(vah)
+volt_squared_hour_volt_squared_hour_meter = v²h
+ampere_squared_hour = a²h
+mass_flux_kilogram_per_second = kg/s
+conductance_siemens = s, mho
+temperature_kelvin = k
+ru2h_volt_squared_hour_meter = 1/(v²h)
+ri2h_ampere_squared_hour_meter = 1/(a²h)
+rv_meter = 1/m³
+percentage = %%
+ampere_hours = ah
+energy_per_volume = wh/m³
+calorific_value_wobbe = j/m³
+molar_fraction_of_gas_composition_mole_percent = mol %%
+mass_density_quantity_of_material = g/m³
+dynamic_viscosity_pascal_second = pa s
+specific_energy_joule_kilogram = j/kg
+pressure_gram_per_square_centimeter = g/cm²
+pressure_atmosphere = atm
+signal_strength_milliwatt = dbm
+signal_strength_microvolt = dbµv
+logarithmic_unit = db
+length_inch = in
+length_foot = ft
+mass_pound = lb
+temperature_fahrenheit = °f
+temperature_rankine = °r
+area_square_inch = sq. in
+area_square_foot = sq ft
+area_acre = ac
+volume_cubic_inch = cu in
+volume_cubic_foot = cu ft
+volume_acre_foot = ac ft
+volume_gallon_imperial = gal(imp)
+volume_gallon_us = gal(us)
+force_pound_force = lbf
+pressure_pound_force_per_square_inch = psi
+density_pound_per_cubic_foot = lb/cu ft
+dynamic_viscosity = lb/(ft .s)
+kinematic_viscosity_square_foot_per_second = sq ft/s
+energy_british_thermal_unit = btu
+energy_therm_eu = thm(ec)
+energy_therm_us = thm(us)
+calorific_value_of_mass_lenthalpy = btu/lb
+calorific_value_of_volume_wobbe = btu/cu ft
+volume_meter_cubic_feet_rv = cu ft rv
+speed_foot_per_second = ft/s
+volume_flux_cubic_foot_per_second = cu ft/s
+volume_flux_cubic_foot_per_min = cu ft/min
+volume_flux_cubic_foot_per_hour = cu ft/h
+volume_flux_cubic_foot_per_day = cu ft/d
+volume_flux_acre_foot_per_second = ac ft/s
+volume_flux_acre_foot_per_min = ac ft/min
+volume_flux_acre_foot_per_hour = ac ft/h
+volume_flux_acre_foot_per_day = ac ft/d
+volume_imperial_gallon_meter_rv = gal(imp) rv
+volume_flux_imperial_gallon_per_second = gal(imp)/s
+volume_flux_imperial_gallon_per_min = gal(imp)/min
+volume_flux_imperial_gallon_per_hour = gal(imp)/h
+volume_flux_imperial_gallon_per_day = gal(imp)/d
+volume_us_gallon_rv = gal(us) rv
+volume_flux_us_gallon_per_second = gal(us)/s
+volume_flux_us_gallon_per_min = gal(us)/min
+volume_flux_us_gallon_per_hour = gal(us)/h
+volume_flux_us_gallon_per_day = gal(us)/d
+energy_flow_british_thermal_unit_per_second = btu/s
+energy_flow_british_thermal_unit_per_minute = btu/min
+energy_flow_british_thermal_unit_per_hour = btu/h
+energy_flow_british_thermal_unit_per_day = btu/d
+extended_table_of_units = extended
+other_unit = other
+no_unit_unitless_count = count

DLMS_SPODES/config_parser.py

@@ -1,53 +1,53 @@
-import os
-import tomllib
-from typing_extensions import deprecated
-
-
-print("Path: ", os.getcwd())
-
-
-@deprecated("use settings.settings")
-def get_values(*args: str) -> dict | None:
-    args = list(args)
-    par = config
-    while args:
-        key = args.pop(0)
-        try:
-            par = par[key]
-            continue
-        except KeyError as e:
-            print(f"error: {e.args[0]}")
-            return None
-    return par
-
-
-if not os.path.isfile(path := ".//config.toml"):
-    path = F"{os.path.dirname(__file__)}{path}"
-elif not os.path.isfile(path):
-    print("NOT FIND CONFIGURATION: <config.toml>")
-with open(path, "rb") as f:
-    config = tomllib.load(f)
-    print(F"Find configuration <config.toml> with path: {f}")
-
-_messages = get_values("DLMS", "messages")
-
-
-def get_message(value: str) -> str:
-    """translate %... from config.toml"""
-    value: bytearray = bytearray(value, "utf-8")
-    ret: bytearray = bytearray()
-    while value:
-        if value.startswith(b"$$"):
-            value.pop(0)
-            ret.append(value.pop(0))
-        elif value.startswith(b"$"):
-            key, sep, value = value[1:].partition(b"$")
-            if key:
-                if _messages and (translate := _messages.get(key.decode("utf-8"))):
-                    val = bytes(translate, "utf-8")
-                else:
-                    val = key
-                ret.extend(val)
-        else:
-            ret.append(value.pop(0))
-    return ret.decode("utf-8", errors="strict")
+import os
+import tomllib
+from typing_extensions import deprecated
+
+
+print("Path: ", os.getcwd())
+
+
+@deprecated("use settings.settings")
+def get_values(*args: str) -> dict | None:
+    args = list(args)
+    par = config
+    while args:
+        key = args.pop(0)
+        try:
+            par = par[key]
+            continue
+        except KeyError as e:
+            print(f"error: {e.args[0]}")
+            return None
+    return par
+
+
+if not os.path.isfile(path := ".//config.toml"):
+    path = F"{os.path.dirname(__file__)}{path}"
+elif not os.path.isfile(path):
+    print("NOT FIND CONFIGURATION: <config.toml>")
+with open(path, "rb") as f:
+    config = tomllib.load(f)
+    print(F"Find configuration <config.toml> with path: {f}")
+
+_messages = get_values("DLMS", "messages")
+
+
+def get_message(value: str) -> str:
+    """translate %... from config.toml"""
+    value: bytearray = bytearray(value, "utf-8")
+    ret: bytearray = bytearray()
+    while value:
+        if value.startswith(b"$$"):
+            value.pop(0)
+            ret.append(value.pop(0))
+        elif value.startswith(b"$"):
+            key, sep, value = value[1:].partition(b"$")
+            if key:
+                if _messages and (translate := _messages.get(key.decode("utf-8"))):
+                    val = bytes(translate, "utf-8")
+                else:
+                    val = key
+                ret.extend(val)
+        else:
+            ret.append(value.pop(0))
+    return ret.decode("utf-8", errors="strict")

DLMS_SPODES/cosem_interface_classes/__class_init__.py

@@ -1,3 +1,3 @@
-from ..cosem_interface_classes import cosem_interface_class as ic, attr_indexes as ai
-from ..cosem_interface_classes.overview import ClassID
-from ..types import common_data_types as cdt, cosem_service_types as cst, useful_types as ut
+from ..cosem_interface_classes import cosem_interface_class as ic, attr_indexes as ai
+from ..cosem_interface_classes.overview import ClassID
+from ..types import common_data_types as cdt, cosem_service_types as cst, useful_types as ut

DLMS_SPODES/cosem_interface_classes/__init__.py

@@ -1,2 +1,2 @@
-from . import collection, implementations as ic_impl, cosem_interface_class as ic
+from . import collection, implementations as ic_impl, cosem_interface_class as ic
 from .parameter import Parameter

DLMS_SPODES/cosem_interface_classes/a_parameter.py

@@ -1,20 +1,20 @@
-from dataclasses import dataclass
-from typing import ClassVar
-from typing_extensions import deprecated
-
-
-@deprecated("use <Parameter>")
-@dataclass
-class AParameter:
-    value: ClassVar[bytes]
-
-    @property
-    def i(self) -> int:
-        return self.value[6]
-
-
-@dataclass
-class Time(AParameter):
-    value = b'\x00\x00\x01\x00\x00\xff\x02'
-
-
+from dataclasses import dataclass
+from typing import ClassVar
+from typing_extensions import deprecated
+
+
+@deprecated("use <Parameter>")
+@dataclass
+class AParameter:
+    value: ClassVar[bytes]
+
+    @property
+    def i(self) -> int:
+        return self.value[6]
+
+
+@dataclass
+class Time(AParameter):
+    value = b'\x00\x00\x01\x00\x00\xff\x02'
+
+