zmdms-webui 1.9.5 → 1.9.7

package/dist/es/node_modules/pako/lib/inflate.js

@@ -1,434 +0,0 @@
-import { __exports as inflate$1 } from '../../../_virtual/inflate.js';
-import './zlib/inflate.js';
-import './utils/common.js';
-import './utils/strings.js';
-import { c as constants } from './zlib/constants.js';
-import { m as messages } from './zlib/messages.js';
-import { z as zstream } from './zlib/zstream.js';
-import { g as gzheader } from './zlib/gzheader.js';
-import { __exports as inflate$2 } from '../../../_virtual/inflate2.js';
-import { __exports as common } from '../../../_virtual/common2.js';
-import { __exports as strings$1 } from '../../../_virtual/strings.js';
-
-var zlib_inflate = inflate$2;
-var utils        = common;
-var strings      = strings$1;
-var c            = constants;
-var msg          = messages;
-var ZStream      = zstream;
-var GZheader     = gzheader;
-
-var toString = Object.prototype.toString;
-
-/**
- * class Inflate
- *
- * Generic JS-style wrapper for zlib calls. If you don't need
- * streaming behaviour - use more simple functions: [[inflate]]
- * and [[inflateRaw]].
- **/
-
-/* internal
- * inflate.chunks -> Array
- *
- * Chunks of output data, if [[Inflate#onData]] not overridden.
- **/
-
-/**
- * Inflate.result -> Uint8Array|Array|String
- *
- * Uncompressed result, generated by default [[Inflate#onData]]
- * and [[Inflate#onEnd]] handlers. Filled after you push last chunk
- * (call [[Inflate#push]] with `Z_FINISH` / `true` param) or if you
- * push a chunk with explicit flush (call [[Inflate#push]] with
- * `Z_SYNC_FLUSH` param).
- **/
-
-/**
- * Inflate.err -> Number
- *
- * Error code after inflate finished. 0 (Z_OK) on success.
- * Should be checked if broken data possible.
- **/
-
-/**
- * Inflate.msg -> String
- *
- * Error message, if [[Inflate.err]] != 0
- **/
-
-
-/**
- * new Inflate(options)
- * - options (Object): zlib inflate options.
- *
- * Creates new inflator instance with specified params. Throws exception
- * on bad params. Supported options:
- *
- * - `windowBits`
- * - `dictionary`
- *
- * [http://zlib.net/manual.html#Advanced](http://zlib.net/manual.html#Advanced)
- * for more information on these.
- *
- * Additional options, for internal needs:
- *
- * - `chunkSize` - size of generated data chunks (16K by default)
- * - `raw` (Boolean) - do raw inflate
- * - `to` (String) - if equal to 'string', then result will be converted
- *   from utf8 to utf16 (javascript) string. When string output requested,
- *   chunk length can differ from `chunkSize`, depending on content.
- *
- * By default, when no options set, autodetect deflate/gzip data format via
- * wrapper header.
- *
- * ##### Example:
- *
- * ```javascript
- * var pako = require('pako')
- *   , chunk1 = Uint8Array([1,2,3,4,5,6,7,8,9])
- *   , chunk2 = Uint8Array([10,11,12,13,14,15,16,17,18,19]);
- *
- * var inflate = new pako.Inflate({ level: 3});
- *
- * inflate.push(chunk1, false);
- * inflate.push(chunk2, true);  // true -> last chunk
- *
- * if (inflate.err) { throw new Error(inflate.err); }
- *
- * console.log(inflate.result);
- * ```
- **/
-function Inflate(options) {
-  if (!(this instanceof Inflate)) return new Inflate(options);
-
-  this.options = utils.assign({
-    chunkSize: 16384,
-    windowBits: 0,
-    to: ''
-  }, options || {});
-
-  var opt = this.options;
-
-  // Force window size for `raw` data, if not set directly,
-  // because we have no header for autodetect.
-  if (opt.raw && (opt.windowBits >= 0) && (opt.windowBits < 16)) {
-    opt.windowBits = -opt.windowBits;
-    if (opt.windowBits === 0) { opt.windowBits = -15; }
-  }
-
-  // If `windowBits` not defined (and mode not raw) - set autodetect flag for gzip/deflate
-  if ((opt.windowBits >= 0) && (opt.windowBits < 16) &&
-      !(options && options.windowBits)) {
-    opt.windowBits += 32;
-  }
-
-  // Gzip header has no info about windows size, we can do autodetect only
-  // for deflate. So, if window size not set, force it to max when gzip possible
-  if ((opt.windowBits > 15) && (opt.windowBits < 48)) {
-    // bit 3 (16) -> gzipped data
-    // bit 4 (32) -> autodetect gzip/deflate
-    if ((opt.windowBits & 15) === 0) {
-      opt.windowBits |= 15;
-    }
-  }
-
-  this.err    = 0;      // error code, if happens (0 = Z_OK)
-  this.msg    = '';     // error message
-  this.ended  = false;  // used to avoid multiple onEnd() calls
-  this.chunks = [];     // chunks of compressed data
-
-  this.strm   = new ZStream();
-  this.strm.avail_out = 0;
-
-  var status  = zlib_inflate.inflateInit2(
-    this.strm,
-    opt.windowBits
-  );
-
-  if (status !== c.Z_OK) {
-    throw new Error(msg[status]);
-  }
-
-  this.header = new GZheader();
-
-  zlib_inflate.inflateGetHeader(this.strm, this.header);
-
-  // Setup dictionary
-  if (opt.dictionary) {
-    // Convert data if needed
-    if (typeof opt.dictionary === 'string') {
-      opt.dictionary = strings.string2buf(opt.dictionary);
-    } else if (toString.call(opt.dictionary) === '[object ArrayBuffer]') {
-      opt.dictionary = new Uint8Array(opt.dictionary);
-    }
-    if (opt.raw) { //In raw mode we need to set the dictionary early
-      status = zlib_inflate.inflateSetDictionary(this.strm, opt.dictionary);
-      if (status !== c.Z_OK) {
-        throw new Error(msg[status]);
-      }
-    }
-  }
-}
-
-/**
- * Inflate#push(data[, mode]) -> Boolean
- * - data (Uint8Array|Array|ArrayBuffer|String): input data
- * - mode (Number|Boolean): 0..6 for corresponding Z_NO_FLUSH..Z_TREE modes.
- *   See constants. Skipped or `false` means Z_NO_FLUSH, `true` means Z_FINISH.
- *
- * Sends input data to inflate pipe, generating [[Inflate#onData]] calls with
- * new output chunks. Returns `true` on success. The last data block must have
- * mode Z_FINISH (or `true`). That will flush internal pending buffers and call
- * [[Inflate#onEnd]]. For interim explicit flushes (without ending the stream) you
- * can use mode Z_SYNC_FLUSH, keeping the decompression context.
- *
- * On fail call [[Inflate#onEnd]] with error code and return false.
- *
- * We strongly recommend to use `Uint8Array` on input for best speed (output
- * format is detected automatically). Also, don't skip last param and always
- * use the same type in your code (boolean or number). That will improve JS speed.
- *
- * For regular `Array`-s make sure all elements are [0..255].
- *
- * ##### Example
- *
- * ```javascript
- * push(chunk, false); // push one of data chunks
- * ...
- * push(chunk, true);  // push last chunk
- * ```
- **/
-Inflate.prototype.push = function (data, mode) {
-  var strm = this.strm;
-  var chunkSize = this.options.chunkSize;
-  var dictionary = this.options.dictionary;
-  var status, _mode;
-  var next_out_utf8, tail, utf8str;
-
-  // Flag to properly process Z_BUF_ERROR on testing inflate call
-  // when we check that all output data was flushed.
-  var allowBufError = false;
-
-  if (this.ended) { return false; }
-  _mode = (mode === ~~mode) ? mode : ((mode === true) ? c.Z_FINISH : c.Z_NO_FLUSH);
-
-  // Convert data if needed
-  if (typeof data === 'string') {
-    // Only binary strings can be decompressed on practice
-    strm.input = strings.binstring2buf(data);
-  } else if (toString.call(data) === '[object ArrayBuffer]') {
-    strm.input = new Uint8Array(data);
-  } else {
-    strm.input = data;
-  }
-
-  strm.next_in = 0;
-  strm.avail_in = strm.input.length;
-
-  do {
-    if (strm.avail_out === 0) {
-      strm.output = new utils.Buf8(chunkSize);
-      strm.next_out = 0;
-      strm.avail_out = chunkSize;
-    }
-
-    status = zlib_inflate.inflate(strm, c.Z_NO_FLUSH);    /* no bad return value */
-
-    if (status === c.Z_NEED_DICT && dictionary) {
-      status = zlib_inflate.inflateSetDictionary(this.strm, dictionary);
-    }
-
-    if (status === c.Z_BUF_ERROR && allowBufError === true) {
-      status = c.Z_OK;
-      allowBufError = false;
-    }
-
-    if (status !== c.Z_STREAM_END && status !== c.Z_OK) {
-      this.onEnd(status);
-      this.ended = true;
-      return false;
-    }
-
-    if (strm.next_out) {
-      if (strm.avail_out === 0 || status === c.Z_STREAM_END || (strm.avail_in === 0 && (_mode === c.Z_FINISH || _mode === c.Z_SYNC_FLUSH))) {
-
-        if (this.options.to === 'string') {
-
-          next_out_utf8 = strings.utf8border(strm.output, strm.next_out);
-
-          tail = strm.next_out - next_out_utf8;
-          utf8str = strings.buf2string(strm.output, next_out_utf8);
-
-          // move tail
-          strm.next_out = tail;
-          strm.avail_out = chunkSize - tail;
-          if (tail) { utils.arraySet(strm.output, strm.output, next_out_utf8, tail, 0); }
-
-          this.onData(utf8str);
-
-        } else {
-          this.onData(utils.shrinkBuf(strm.output, strm.next_out));
-        }
-      }
-    }
-
-    // When no more input data, we should check that internal inflate buffers
-    // are flushed. The only way to do it when avail_out = 0 - run one more
-    // inflate pass. But if output data not exists, inflate return Z_BUF_ERROR.
-    // Here we set flag to process this error properly.
-    //
-    // NOTE. Deflate does not return error in this case and does not needs such
-    // logic.
-    if (strm.avail_in === 0 && strm.avail_out === 0) {
-      allowBufError = true;
-    }
-
-  } while ((strm.avail_in > 0 || strm.avail_out === 0) && status !== c.Z_STREAM_END);
-
-  if (status === c.Z_STREAM_END) {
-    _mode = c.Z_FINISH;
-  }
-
-  // Finalize on the last chunk.
-  if (_mode === c.Z_FINISH) {
-    status = zlib_inflate.inflateEnd(this.strm);
-    this.onEnd(status);
-    this.ended = true;
-    return status === c.Z_OK;
-  }
-
-  // callback interim results if Z_SYNC_FLUSH.
-  if (_mode === c.Z_SYNC_FLUSH) {
-    this.onEnd(c.Z_OK);
-    strm.avail_out = 0;
-    return true;
-  }
-
-  return true;
-};
-
-
-/**
- * Inflate#onData(chunk) -> Void
- * - chunk (Uint8Array|Array|String): output data. Type of array depends
- *   on js engine support. When string output requested, each chunk
- *   will be string.
- *
- * By default, stores data blocks in `chunks[]` property and glue
- * those in `onEnd`. Override this handler, if you need another behaviour.
- **/
-Inflate.prototype.onData = function (chunk) {
-  this.chunks.push(chunk);
-};
-
-
-/**
- * Inflate#onEnd(status) -> Void
- * - status (Number): inflate status. 0 (Z_OK) on success,
- *   other if not.
- *
- * Called either after you tell inflate that the input stream is
- * complete (Z_FINISH) or should be flushed (Z_SYNC_FLUSH)
- * or if an error happened. By default - join collected chunks,
- * free memory and fill `results` / `err` properties.
- **/
-Inflate.prototype.onEnd = function (status) {
-  // On success - join
-  if (status === c.Z_OK) {
-    if (this.options.to === 'string') {
-      // Glue & convert here, until we teach pako to send
-      // utf8 aligned strings to onData
-      this.result = this.chunks.join('');
-    } else {
-      this.result = utils.flattenChunks(this.chunks);
-    }
-  }
-  this.chunks = [];
-  this.err = status;
-  this.msg = this.strm.msg;
-};
-
-
-/**
- * inflate(data[, options]) -> Uint8Array|Array|String
- * - data (Uint8Array|Array|String): input data to decompress.
- * - options (Object): zlib inflate options.
- *
- * Decompress `data` with inflate/ungzip and `options`. Autodetect
- * format via wrapper header by default. That's why we don't provide
- * separate `ungzip` method.
- *
- * Supported options are:
- *
- * - windowBits
- *
- * [http://zlib.net/manual.html#Advanced](http://zlib.net/manual.html#Advanced)
- * for more information.
- *
- * Sugar (options):
- *
- * - `raw` (Boolean) - say that we work with raw stream, if you don't wish to specify
- *   negative windowBits implicitly.
- * - `to` (String) - if equal to 'string', then result will be converted
- *   from utf8 to utf16 (javascript) string. When string output requested,
- *   chunk length can differ from `chunkSize`, depending on content.
- *
- *
- * ##### Example:
- *
- * ```javascript
- * var pako = require('pako')
- *   , input = pako.deflate([1,2,3,4,5,6,7,8,9])
- *   , output;
- *
- * try {
- *   output = pako.inflate(input);
- * } catch (err)
- *   console.log(err);
- * }
- * ```
- **/
-function inflate(input, options) {
-  var inflator = new Inflate(options);
-
-  inflator.push(input, true);
-
-  // That will never happens, if you don't cheat with options :)
-  if (inflator.err) { throw inflator.msg || msg[inflator.err]; }
-
-  return inflator.result;
-}
-
-
-/**
- * inflateRaw(data[, options]) -> Uint8Array|Array|String
- * - data (Uint8Array|Array|String): input data to decompress.
- * - options (Object): zlib inflate options.
- *
- * The same as [[inflate]], but creates raw data, without wrapper
- * (header and adler32 crc).
- **/
-function inflateRaw(input, options) {
-  options = options || {};
-  options.raw = true;
-  return inflate(input, options);
-}
-
-
-/**
- * ungzip(data[, options]) -> Uint8Array|Array|String
- * - data (Uint8Array|Array|String): input data to decompress.
- * - options (Object): zlib inflate options.
- *
- * Just shortcut to [[inflate]], because it autodetects format
- * by header.content. Done for convenience.
- **/
-
-
-inflate$1.Inflate = Inflate;
-inflate$1.inflate = inflate;
-inflate$1.inflateRaw = inflateRaw;
-inflate$1.ungzip  = inflate;
-
-export { inflate$1 as default };

package/dist/es/node_modules/pako/lib/utils/common.js

@@ -1,108 +0,0 @@
-import { __exports as common } from '../../../../_virtual/common2.js';
-
-(function (exports) {
-
-
-	var TYPED_OK =  (typeof Uint8Array !== 'undefined') &&
-	                (typeof Uint16Array !== 'undefined') &&
-	                (typeof Int32Array !== 'undefined');
-
-	function _has(obj, key) {
-	  return Object.prototype.hasOwnProperty.call(obj, key);
-	}
-
-	exports.assign = function (obj /*from1, from2, from3, ...*/) {
-	  var sources = Array.prototype.slice.call(arguments, 1);
-	  while (sources.length) {
-	    var source = sources.shift();
-	    if (!source) { continue; }
-
-	    if (typeof source !== 'object') {
-	      throw new TypeError(source + 'must be non-object');
-	    }
-
-	    for (var p in source) {
-	      if (_has(source, p)) {
-	        obj[p] = source[p];
-	      }
-	    }
-	  }
-
-	  return obj;
-	};
-
-
-	// reduce buffer size, avoiding mem copy
-	exports.shrinkBuf = function (buf, size) {
-	  if (buf.length === size) { return buf; }
-	  if (buf.subarray) { return buf.subarray(0, size); }
-	  buf.length = size;
-	  return buf;
-	};
-
-
-	var fnTyped = {
-	  arraySet: function (dest, src, src_offs, len, dest_offs) {
-	    if (src.subarray && dest.subarray) {
-	      dest.set(src.subarray(src_offs, src_offs + len), dest_offs);
-	      return;
-	    }
-	    // Fallback to ordinary array
-	    for (var i = 0; i < len; i++) {
-	      dest[dest_offs + i] = src[src_offs + i];
-	    }
-	  },
-	  // Join array of chunks to single array.
-	  flattenChunks: function (chunks) {
-	    var i, l, len, pos, chunk, result;
-
-	    // calculate data length
-	    len = 0;
-	    for (i = 0, l = chunks.length; i < l; i++) {
-	      len += chunks[i].length;
-	    }
-
-	    // join chunks
-	    result = new Uint8Array(len);
-	    pos = 0;
-	    for (i = 0, l = chunks.length; i < l; i++) {
-	      chunk = chunks[i];
-	      result.set(chunk, pos);
-	      pos += chunk.length;
-	    }
-
-	    return result;
-	  }
-	};
-
-	var fnUntyped = {
-	  arraySet: function (dest, src, src_offs, len, dest_offs) {
-	    for (var i = 0; i < len; i++) {
-	      dest[dest_offs + i] = src[src_offs + i];
-	    }
-	  },
-	  // Join array of chunks to single array.
-	  flattenChunks: function (chunks) {
-	    return [].concat.apply([], chunks);
-	  }
-	};
-
-
-	// Enable/Disable typed arrays use, for testing
-	//
-	exports.setTyped = function (on) {
-	  if (on) {
-	    exports.Buf8  = Uint8Array;
-	    exports.Buf16 = Uint16Array;
-	    exports.Buf32 = Int32Array;
-	    exports.assign(exports, fnTyped);
-	  } else {
-	    exports.Buf8  = Array;
-	    exports.Buf16 = Array;
-	    exports.Buf32 = Array;
-	    exports.assign(exports, fnUntyped);
-	  }
-	};
-
-	exports.setTyped(TYPED_OK); 
-} (common));