zmdms-webui 1.9.3 → 1.9.5

package/dist/es/node_modules/pako/lib/inflate.js

@@ -0,0 +1,434 @@
+import { __exports as inflate$1 } from '../../../_virtual/inflate.js';
+import './zlib/inflate.js';
+import './utils/common.js';
+import './utils/strings.js';
+import { c as constants } from './zlib/constants.js';
+import { m as messages } from './zlib/messages.js';
+import { z as zstream } from './zlib/zstream.js';
+import { g as gzheader } from './zlib/gzheader.js';
+import { __exports as inflate$2 } from '../../../_virtual/inflate2.js';
+import { __exports as common } from '../../../_virtual/common2.js';
+import { __exports as strings$1 } from '../../../_virtual/strings.js';
+
+var zlib_inflate = inflate$2;
+var utils        = common;
+var strings      = strings$1;
+var c            = constants;
+var msg          = messages;
+var ZStream      = zstream;
+var GZheader     = gzheader;
+
+var toString = Object.prototype.toString;
+
+/**
+ * class Inflate
+ *
+ * Generic JS-style wrapper for zlib calls. If you don't need
+ * streaming behaviour - use more simple functions: [[inflate]]
+ * and [[inflateRaw]].
+ **/
+
+/* internal
+ * inflate.chunks -> Array
+ *
+ * Chunks of output data, if [[Inflate#onData]] not overridden.
+ **/
+
+/**
+ * Inflate.result -> Uint8Array|Array|String
+ *
+ * Uncompressed result, generated by default [[Inflate#onData]]
+ * and [[Inflate#onEnd]] handlers. Filled after you push last chunk
+ * (call [[Inflate#push]] with `Z_FINISH` / `true` param) or if you
+ * push a chunk with explicit flush (call [[Inflate#push]] with
+ * `Z_SYNC_FLUSH` param).
+ **/
+
+/**
+ * Inflate.err -> Number
+ *
+ * Error code after inflate finished. 0 (Z_OK) on success.
+ * Should be checked if broken data possible.
+ **/
+
+/**
+ * Inflate.msg -> String
+ *
+ * Error message, if [[Inflate.err]] != 0
+ **/
+
+
+/**
+ * new Inflate(options)
+ * - options (Object): zlib inflate options.
+ *
+ * Creates new inflator instance with specified params. Throws exception
+ * on bad params. Supported options:
+ *
+ * - `windowBits`
+ * - `dictionary`
+ *
+ * [http://zlib.net/manual.html#Advanced](http://zlib.net/manual.html#Advanced)
+ * for more information on these.
+ *
+ * Additional options, for internal needs:
+ *
+ * - `chunkSize` - size of generated data chunks (16K by default)
+ * - `raw` (Boolean) - do raw inflate
+ * - `to` (String) - if equal to 'string', then result will be converted
+ *   from utf8 to utf16 (javascript) string. When string output requested,
+ *   chunk length can differ from `chunkSize`, depending on content.
+ *
+ * By default, when no options set, autodetect deflate/gzip data format via
+ * wrapper header.
+ *
+ * ##### Example:
+ *
+ * ```javascript
+ * var pako = require('pako')
+ *   , chunk1 = Uint8Array([1,2,3,4,5,6,7,8,9])
+ *   , chunk2 = Uint8Array([10,11,12,13,14,15,16,17,18,19]);
+ *
+ * var inflate = new pako.Inflate({ level: 3});
+ *
+ * inflate.push(chunk1, false);
+ * inflate.push(chunk2, true);  // true -> last chunk
+ *
+ * if (inflate.err) { throw new Error(inflate.err); }
+ *
+ * console.log(inflate.result);
+ * ```
+ **/
+function Inflate(options) {
+  if (!(this instanceof Inflate)) return new Inflate(options);
+
+  this.options = utils.assign({
+    chunkSize: 16384,
+    windowBits: 0,
+    to: ''
+  }, options || {});
+
+  var opt = this.options;
+
+  // Force window size for `raw` data, if not set directly,
+  // because we have no header for autodetect.
+  if (opt.raw && (opt.windowBits >= 0) && (opt.windowBits < 16)) {
+    opt.windowBits = -opt.windowBits;
+    if (opt.windowBits === 0) { opt.windowBits = -15; }
+  }
+
+  // If `windowBits` not defined (and mode not raw) - set autodetect flag for gzip/deflate
+  if ((opt.windowBits >= 0) && (opt.windowBits < 16) &&
+      !(options && options.windowBits)) {
+    opt.windowBits += 32;
+  }
+
+  // Gzip header has no info about windows size, we can do autodetect only
+  // for deflate. So, if window size not set, force it to max when gzip possible
+  if ((opt.windowBits > 15) && (opt.windowBits < 48)) {
+    // bit 3 (16) -> gzipped data
+    // bit 4 (32) -> autodetect gzip/deflate
+    if ((opt.windowBits & 15) === 0) {
+      opt.windowBits |= 15;
+    }
+  }
+
+  this.err    = 0;      // error code, if happens (0 = Z_OK)
+  this.msg    = '';     // error message
+  this.ended  = false;  // used to avoid multiple onEnd() calls
+  this.chunks = [];     // chunks of compressed data
+
+  this.strm   = new ZStream();
+  this.strm.avail_out = 0;
+
+  var status  = zlib_inflate.inflateInit2(
+    this.strm,
+    opt.windowBits
+  );
+
+  if (status !== c.Z_OK) {
+    throw new Error(msg[status]);
+  }
+
+  this.header = new GZheader();
+
+  zlib_inflate.inflateGetHeader(this.strm, this.header);
+
+  // Setup dictionary
+  if (opt.dictionary) {
+    // Convert data if needed
+    if (typeof opt.dictionary === 'string') {
+      opt.dictionary = strings.string2buf(opt.dictionary);
+    } else if (toString.call(opt.dictionary) === '[object ArrayBuffer]') {
+      opt.dictionary = new Uint8Array(opt.dictionary);
+    }
+    if (opt.raw) { //In raw mode we need to set the dictionary early
+      status = zlib_inflate.inflateSetDictionary(this.strm, opt.dictionary);
+      if (status !== c.Z_OK) {
+        throw new Error(msg[status]);
+      }
+    }
+  }
+}
+
+/**
+ * Inflate#push(data[, mode]) -> Boolean
+ * - data (Uint8Array|Array|ArrayBuffer|String): input data
+ * - mode (Number|Boolean): 0..6 for corresponding Z_NO_FLUSH..Z_TREE modes.
+ *   See constants. Skipped or `false` means Z_NO_FLUSH, `true` means Z_FINISH.
+ *
+ * Sends input data to inflate pipe, generating [[Inflate#onData]] calls with
+ * new output chunks. Returns `true` on success. The last data block must have
+ * mode Z_FINISH (or `true`). That will flush internal pending buffers and call
+ * [[Inflate#onEnd]]. For interim explicit flushes (without ending the stream) you
+ * can use mode Z_SYNC_FLUSH, keeping the decompression context.
+ *
+ * On fail call [[Inflate#onEnd]] with error code and return false.
+ *
+ * We strongly recommend to use `Uint8Array` on input for best speed (output
+ * format is detected automatically). Also, don't skip last param and always
+ * use the same type in your code (boolean or number). That will improve JS speed.
+ *
+ * For regular `Array`-s make sure all elements are [0..255].
+ *
+ * ##### Example
+ *
+ * ```javascript
+ * push(chunk, false); // push one of data chunks
+ * ...
+ * push(chunk, true);  // push last chunk
+ * ```
+ **/
+Inflate.prototype.push = function (data, mode) {
+  var strm = this.strm;
+  var chunkSize = this.options.chunkSize;
+  var dictionary = this.options.dictionary;
+  var status, _mode;
+  var next_out_utf8, tail, utf8str;
+
+  // Flag to properly process Z_BUF_ERROR on testing inflate call
+  // when we check that all output data was flushed.
+  var allowBufError = false;
+
+  if (this.ended) { return false; }
+  _mode = (mode === ~~mode) ? mode : ((mode === true) ? c.Z_FINISH : c.Z_NO_FLUSH);
+
+  // Convert data if needed
+  if (typeof data === 'string') {
+    // Only binary strings can be decompressed on practice
+    strm.input = strings.binstring2buf(data);
+  } else if (toString.call(data) === '[object ArrayBuffer]') {
+    strm.input = new Uint8Array(data);
+  } else {
+    strm.input = data;
+  }
+
+  strm.next_in = 0;
+  strm.avail_in = strm.input.length;
+
+  do {
+    if (strm.avail_out === 0) {
+      strm.output = new utils.Buf8(chunkSize);
+      strm.next_out = 0;
+      strm.avail_out = chunkSize;
+    }
+
+    status = zlib_inflate.inflate(strm, c.Z_NO_FLUSH);    /* no bad return value */
+
+    if (status === c.Z_NEED_DICT && dictionary) {
+      status = zlib_inflate.inflateSetDictionary(this.strm, dictionary);
+    }
+
+    if (status === c.Z_BUF_ERROR && allowBufError === true) {
+      status = c.Z_OK;
+      allowBufError = false;
+    }
+
+    if (status !== c.Z_STREAM_END && status !== c.Z_OK) {
+      this.onEnd(status);
+      this.ended = true;
+      return false;
+    }
+
+    if (strm.next_out) {
+      if (strm.avail_out === 0 || status === c.Z_STREAM_END || (strm.avail_in === 0 && (_mode === c.Z_FINISH || _mode === c.Z_SYNC_FLUSH))) {
+
+        if (this.options.to === 'string') {
+
+          next_out_utf8 = strings.utf8border(strm.output, strm.next_out);
+
+          tail = strm.next_out - next_out_utf8;
+          utf8str = strings.buf2string(strm.output, next_out_utf8);
+
+          // move tail
+          strm.next_out = tail;
+          strm.avail_out = chunkSize - tail;
+          if (tail) { utils.arraySet(strm.output, strm.output, next_out_utf8, tail, 0); }
+
+          this.onData(utf8str);
+
+        } else {
+          this.onData(utils.shrinkBuf(strm.output, strm.next_out));
+        }
+      }
+    }
+
+    // When no more input data, we should check that internal inflate buffers
+    // are flushed. The only way to do it when avail_out = 0 - run one more
+    // inflate pass. But if output data not exists, inflate return Z_BUF_ERROR.
+    // Here we set flag to process this error properly.
+    //
+    // NOTE. Deflate does not return error in this case and does not needs such
+    // logic.
+    if (strm.avail_in === 0 && strm.avail_out === 0) {
+      allowBufError = true;
+    }
+
+  } while ((strm.avail_in > 0 || strm.avail_out === 0) && status !== c.Z_STREAM_END);
+
+  if (status === c.Z_STREAM_END) {
+    _mode = c.Z_FINISH;
+  }
+
+  // Finalize on the last chunk.
+  if (_mode === c.Z_FINISH) {
+    status = zlib_inflate.inflateEnd(this.strm);
+    this.onEnd(status);
+    this.ended = true;
+    return status === c.Z_OK;
+  }
+
+  // callback interim results if Z_SYNC_FLUSH.
+  if (_mode === c.Z_SYNC_FLUSH) {
+    this.onEnd(c.Z_OK);
+    strm.avail_out = 0;
+    return true;
+  }
+
+  return true;
+};
+
+
+/**
+ * Inflate#onData(chunk) -> Void
+ * - chunk (Uint8Array|Array|String): output data. Type of array depends
+ *   on js engine support. When string output requested, each chunk
+ *   will be string.
+ *
+ * By default, stores data blocks in `chunks[]` property and glue
+ * those in `onEnd`. Override this handler, if you need another behaviour.
+ **/
+Inflate.prototype.onData = function (chunk) {
+  this.chunks.push(chunk);
+};
+
+
+/**
+ * Inflate#onEnd(status) -> Void
+ * - status (Number): inflate status. 0 (Z_OK) on success,
+ *   other if not.
+ *
+ * Called either after you tell inflate that the input stream is
+ * complete (Z_FINISH) or should be flushed (Z_SYNC_FLUSH)
+ * or if an error happened. By default - join collected chunks,
+ * free memory and fill `results` / `err` properties.
+ **/
+Inflate.prototype.onEnd = function (status) {
+  // On success - join
+  if (status === c.Z_OK) {
+    if (this.options.to === 'string') {
+      // Glue & convert here, until we teach pako to send
+      // utf8 aligned strings to onData
+      this.result = this.chunks.join('');
+    } else {
+      this.result = utils.flattenChunks(this.chunks);
+    }
+  }
+  this.chunks = [];
+  this.err = status;
+  this.msg = this.strm.msg;
+};
+
+
+/**
+ * inflate(data[, options]) -> Uint8Array|Array|String
+ * - data (Uint8Array|Array|String): input data to decompress.
+ * - options (Object): zlib inflate options.
+ *
+ * Decompress `data` with inflate/ungzip and `options`. Autodetect
+ * format via wrapper header by default. That's why we don't provide
+ * separate `ungzip` method.
+ *
+ * Supported options are:
+ *
+ * - windowBits
+ *
+ * [http://zlib.net/manual.html#Advanced](http://zlib.net/manual.html#Advanced)
+ * for more information.
+ *
+ * Sugar (options):
+ *
+ * - `raw` (Boolean) - say that we work with raw stream, if you don't wish to specify
+ *   negative windowBits implicitly.
+ * - `to` (String) - if equal to 'string', then result will be converted
+ *   from utf8 to utf16 (javascript) string. When string output requested,
+ *   chunk length can differ from `chunkSize`, depending on content.
+ *
+ *
+ * ##### Example:
+ *
+ * ```javascript
+ * var pako = require('pako')
+ *   , input = pako.deflate([1,2,3,4,5,6,7,8,9])
+ *   , output;
+ *
+ * try {
+ *   output = pako.inflate(input);
+ * } catch (err)
+ *   console.log(err);
+ * }
+ * ```
+ **/
+function inflate(input, options) {
+  var inflator = new Inflate(options);
+
+  inflator.push(input, true);
+
+  // That will never happens, if you don't cheat with options :)
+  if (inflator.err) { throw inflator.msg || msg[inflator.err]; }
+
+  return inflator.result;
+}
+
+
+/**
+ * inflateRaw(data[, options]) -> Uint8Array|Array|String
+ * - data (Uint8Array|Array|String): input data to decompress.
+ * - options (Object): zlib inflate options.
+ *
+ * The same as [[inflate]], but creates raw data, without wrapper
+ * (header and adler32 crc).
+ **/
+function inflateRaw(input, options) {
+  options = options || {};
+  options.raw = true;
+  return inflate(input, options);
+}
+
+
+/**
+ * ungzip(data[, options]) -> Uint8Array|Array|String
+ * - data (Uint8Array|Array|String): input data to decompress.
+ * - options (Object): zlib inflate options.
+ *
+ * Just shortcut to [[inflate]], because it autodetects format
+ * by header.content. Done for convenience.
+ **/
+
+
+inflate$1.Inflate = Inflate;
+inflate$1.inflate = inflate;
+inflate$1.inflateRaw = inflateRaw;
+inflate$1.ungzip  = inflate;
+
+export { inflate$1 as default };

package/dist/es/node_modules/pako/lib/utils/common.js

@@ -0,0 +1,108 @@
+import { __exports as common } from '../../../../_virtual/common2.js';
+
+(function (exports) {
+
+
+	var TYPED_OK =  (typeof Uint8Array !== 'undefined') &&
+	                (typeof Uint16Array !== 'undefined') &&
+	                (typeof Int32Array !== 'undefined');
+
+	function _has(obj, key) {
+	  return Object.prototype.hasOwnProperty.call(obj, key);
+	}
+
+	exports.assign = function (obj /*from1, from2, from3, ...*/) {
+	  var sources = Array.prototype.slice.call(arguments, 1);
+	  while (sources.length) {
+	    var source = sources.shift();
+	    if (!source) { continue; }
+
+	    if (typeof source !== 'object') {
+	      throw new TypeError(source + 'must be non-object');
+	    }
+
+	    for (var p in source) {
+	      if (_has(source, p)) {
+	        obj[p] = source[p];
+	      }
+	    }
+	  }
+
+	  return obj;
+	};
+
+
+	// reduce buffer size, avoiding mem copy
+	exports.shrinkBuf = function (buf, size) {
+	  if (buf.length === size) { return buf; }
+	  if (buf.subarray) { return buf.subarray(0, size); }
+	  buf.length = size;
+	  return buf;
+	};
+
+
+	var fnTyped = {
+	  arraySet: function (dest, src, src_offs, len, dest_offs) {
+	    if (src.subarray && dest.subarray) {
+	      dest.set(src.subarray(src_offs, src_offs + len), dest_offs);
+	      return;
+	    }
+	    // Fallback to ordinary array
+	    for (var i = 0; i < len; i++) {
+	      dest[dest_offs + i] = src[src_offs + i];
+	    }
+	  },
+	  // Join array of chunks to single array.
+	  flattenChunks: function (chunks) {
+	    var i, l, len, pos, chunk, result;
+
+	    // calculate data length
+	    len = 0;
+	    for (i = 0, l = chunks.length; i < l; i++) {
+	      len += chunks[i].length;
+	    }
+
+	    // join chunks
+	    result = new Uint8Array(len);
+	    pos = 0;
+	    for (i = 0, l = chunks.length; i < l; i++) {
+	      chunk = chunks[i];
+	      result.set(chunk, pos);
+	      pos += chunk.length;
+	    }
+
+	    return result;
+	  }
+	};
+
+	var fnUntyped = {
+	  arraySet: function (dest, src, src_offs, len, dest_offs) {
+	    for (var i = 0; i < len; i++) {
+	      dest[dest_offs + i] = src[src_offs + i];
+	    }
+	  },
+	  // Join array of chunks to single array.
+	  flattenChunks: function (chunks) {
+	    return [].concat.apply([], chunks);
+	  }
+	};
+
+
+	// Enable/Disable typed arrays use, for testing
+	//
+	exports.setTyped = function (on) {
+	  if (on) {
+	    exports.Buf8  = Uint8Array;
+	    exports.Buf16 = Uint16Array;
+	    exports.Buf32 = Int32Array;
+	    exports.assign(exports, fnTyped);
+	  } else {
+	    exports.Buf8  = Array;
+	    exports.Buf16 = Array;
+	    exports.Buf32 = Array;
+	    exports.assign(exports, fnUntyped);
+	  }
+	};
+
+	exports.setTyped(TYPED_OK); 
+} (common));