zigbee-herdsman 3.1.0 → 3.2.0

package/dist/adapter/ember/uart/ash.js

@@ -0,0 +1,1620 @@
+"use strict";
+/* v8 ignore start */
+var __importDefault = (this && this.__importDefault) || function (mod) {
+    return (mod && mod.__esModule) ? mod : { "default": mod };
+};
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.UartAsh = exports.CONFIG_TX_K = void 0;
+const node_events_1 = require("node:events");
+const node_net_1 = require("node:net");
+const utils_1 = require("../../../utils");
+const logger_1 = require("../../../utils/logger");
+const serialPort_1 = require("../../serialPort");
+const socketPortUtils_1 = __importDefault(require("../../socketPortUtils"));
+const enums_1 = require("../enums");
+const math_1 = require("../utils/math");
+const consts_1 = require("./consts");
+const enums_2 = require("./enums");
+const parser_1 = require("./parser");
+const queues_1 = require("./queues");
+const writer_1 = require("./writer");
+const NS = 'zh:ember:uart:ash';
+/** ASH get rflag in control byte */
+// const ashGetRFlag = (ctrl: number): number => (ctrl & ASH_RFLAG_MASK) >> ASH_RFLAG_BIT;
+/** ASH get nflag in control byte */
+// const ashGetNFlag = (ctrl: number): number => (ctrl & ASH_NFLAG_MASK) >> ASH_NFLAG_BIT;
+/** ASH get frmnum in control byte */
+const ashGetFrmNum = (ctrl) => (ctrl & consts_1.ASH_FRMNUM_MASK) >> consts_1.ASH_FRMNUM_BIT;
+/** ASH get acknum in control byte */
+const ashGetACKNum = (ctrl) => (ctrl & consts_1.ASH_ACKNUM_MASK) >> consts_1.ASH_ACKNUM_BIT;
+var SendState;
+(function (SendState) {
+    SendState[SendState["IDLE"] = 0] = "IDLE";
+    SendState[SendState["SHFRAME"] = 1] = "SHFRAME";
+    SendState[SendState["TX_DATA"] = 2] = "TX_DATA";
+    SendState[SendState["RETX_DATA"] = 3] = "RETX_DATA";
+})(SendState || (SendState = {}));
+// Bits in ashFlags
+var Flag;
+(function (Flag) {
+    /** Reject Condition */
+    Flag[Flag["REJ"] = 1] = "REJ";
+    /** Retransmit Condition */
+    Flag[Flag["RETX"] = 2] = "RETX";
+    /** send NAK */
+    Flag[Flag["NAK"] = 4] = "NAK";
+    /** send ACK */
+    Flag[Flag["ACK"] = 8] = "ACK";
+    /** send RST */
+    Flag[Flag["RST"] = 16] = "RST";
+    /** send immediate CAN */
+    Flag[Flag["CAN"] = 32] = "CAN";
+    /** in CONNECTED state, else ERROR */
+    Flag[Flag["CONNECTED"] = 64] = "CONNECTED";
+    /** not ready to receive DATA frames */
+    Flag[Flag["NR"] = 256] = "NR";
+    /** last transmitted NR status */
+    Flag[Flag["NRTX"] = 512] = "NRTX";
+})(Flag || (Flag = {}));
+/** max frames sent without being ACKed (1-7) */
+exports.CONFIG_TX_K = 3;
+/** enables randomizing DATA frame payloads */
+const CONFIG_RANDOMIZE = true;
+/** adaptive rec'd ACK timeout initial value */
+const CONFIG_ACK_TIME_INIT = 800;
+/**  "     "     "     "     " minimum value */
+const CONFIG_ACK_TIME_MIN = 400;
+/**  "     "     "     "     " maximum value */
+const CONFIG_ACK_TIME_MAX = 2400;
+/** time allowed to receive RSTACK after ncp is reset */
+const CONFIG_TIME_RST = 2500;
+/** time between checks for received RSTACK (CONNECTED status) */
+const CONFIG_TIME_RST_CHECK = 100;
+/** if free buffers < limit, host receiver isn't ready, will hold off the ncp from sending normal priority frames */
+const CONFIG_NR_LOW_LIMIT = 8; // RX_FREE_LW
+/** if free buffers > limit, host receiver is ready */
+const CONFIG_NR_HIGH_LIMIT = 12; // RX_FREE_HW
+/** time until a set nFlag must be resent (max 2032) */
+const CONFIG_NR_TIME = 480;
+/** Read/write max bytes count at stream level */
+const CONFIG_HIGHWATER_MARK = 256;
+/**
+ * ASH Protocol handler.
+ */
+class UartAsh extends node_events_1.EventEmitter {
+    portOptions;
+    serialPort;
+    socketPort;
+    writer;
+    parser;
+    /** True when serial/socket is currently closing. */
+    closing;
+    /** time ackTimer started: 0 means not ready uint16_t */
+    ackTimer;
+    /** time used to check ackTimer expiry (msecs) uint16_t */
+    ackPeriod;
+    /** not ready timer (16 msec units). Set to (now + config.nrTime) when started. uint8_t */
+    nrTimer;
+    /** frame decode in progress */
+    decodeInProgress;
+    // Variables used in encoding frames
+    /** true when preceding byte was escaped */
+    encodeEscFlag;
+    /** byte to send after ASH_ESC uint8_t */
+    encodeFlip;
+    /** uint16_t */
+    encodeCrc;
+    /** encoder state: 0 = control/data bytes, 1 = crc low byte, 2 = crc high byte, 3 = flag. uint8_t */
+    encodeState;
+    /** bytes remaining to encode. uint8_t */
+    encodeCount;
+    // Variables used in decoding frames
+    /** bytes in frame, plus CRC, clamped to limit +1: high values also used to record certain errors. uint8_t */
+    decodeLen;
+    /** ASH_FLIP if previous byte was ASH_ESC. uint8_t */
+    decodeFlip;
+    /** a 2 byte queue to avoid outputting crc bytes. uint8_t */
+    decodeByte1;
+    /** at frame end, they contain the received crc. uint8_t */
+    decodeByte2;
+    /** uint16_t */
+    decodeCrc;
+    /** outgoing short frames */
+    txSHBuffer;
+    /** incoming short frames */
+    rxSHBuffer;
+    /** bit flags for top-level logic. uint16_t */
+    flags;
+    /** frame ack'ed from remote peer. uint8_t */
+    ackRx;
+    /** frame ack'ed to remote peer. uint8_t */
+    ackTx;
+    /** next frame to be transmitted. uint8_t */
+    frmTx;
+    /** next frame to be retransmitted. uint8_t */
+    frmReTx;
+    /** next frame expected to be rec'd. uint8_t */
+    frmRx;
+    /** frame at retx queue's head. uint8_t */
+    frmReTxHead;
+    /** consecutive timeout counter. uint8_t */
+    timeouts;
+    /** rec'd DATA frame buffer. uint8_t */
+    rxDataBuffer;
+    /** rec'd frame length. uint8_t */
+    rxLen;
+    /** tx frame offset. uint8_t */
+    txOffset;
+    counters;
+    /**
+     * Errors reported by the NCP.
+     * The `NcpFailedCode` from the frame reporting this is logged before this is set to make it clear where it failed:
+     * - The NCP sent an ERROR frame during the initial reset sequence (before CONNECTED state)
+     * - The NCP sent an ERROR frame
+     * - The NCP sent an unexpected RSTACK
+     */
+    ncpError;
+    /** Errors reported by the Host. */
+    hostError;
+    /** sendExec() state variable */
+    sendState;
+    /** NCP is enabled to sleep, set by EZSP, not supported atm, always false */
+    ncpSleepEnabled;
+    /**
+     * Set when the ncp has indicated it has a pending callback by seting the callback flag in the frame control byte
+     * or (uart version only) by sending an an ASH_WAKE byte between frames.
+     */
+    ncpHasCallbacks;
+    /** Transmit buffers */
+    txPool;
+    txQueue;
+    reTxQueue;
+    txFree;
+    /** Receive buffers */
+    rxPool;
+    rxQueue;
+    rxFree;
+    constructor(options) {
+        super();
+        this.portOptions = options;
+        this.serialPort = undefined;
+        this.socketPort = undefined;
+        this.writer = new writer_1.AshWriter({ highWaterMark: CONFIG_HIGHWATER_MARK });
+        this.parser = new parser_1.AshParser({ readableHighWaterMark: CONFIG_HIGHWATER_MARK });
+        this.txPool = new Array(consts_1.TX_POOL_BUFFERS);
+        this.txQueue = new queues_1.EzspQueue();
+        this.reTxQueue = new queues_1.EzspQueue();
+        this.txFree = new queues_1.EzspFreeList();
+        this.rxPool = new Array(consts_1.EZSP_HOST_RX_POOL_SIZE);
+        this.rxQueue = new queues_1.EzspQueue();
+        this.rxFree = new queues_1.EzspFreeList();
+        this.closing = false;
+        this.txSHBuffer = Buffer.alloc(consts_1.SH_TX_BUFFER_LEN);
+        this.rxSHBuffer = Buffer.alloc(consts_1.SH_RX_BUFFER_LEN);
+        this.ackTimer = 0;
+        this.ackPeriod = 0;
+        this.nrTimer = 0;
+        this.flags = 0;
+        this.decodeInProgress = false;
+        this.ackRx = 0;
+        this.ackTx = 0;
+        this.frmTx = 0;
+        this.frmReTx = 0;
+        this.frmRx = 0;
+        this.frmReTxHead = 0;
+        this.timeouts = 0;
+        this.rxDataBuffer = undefined;
+        this.rxLen = 0;
+        // init to "start of frame" default
+        this.encodeCount = 0;
+        this.encodeState = 0;
+        this.encodeEscFlag = false;
+        this.encodeFlip = 0;
+        this.encodeCrc = 0xffff;
+        this.txOffset = 0;
+        // init to "start of frame" default
+        this.decodeLen = 0;
+        this.decodeByte1 = 0;
+        this.decodeByte2 = 0;
+        this.decodeFlip = 0;
+        this.decodeCrc = 0xffff;
+        this.ncpError = enums_1.EzspStatus.NO_ERROR;
+        this.hostError = enums_1.EzspStatus.NO_ERROR;
+        this.sendState = SendState.IDLE;
+        this.ncpSleepEnabled = false;
+        this.ncpHasCallbacks = false;
+        this.stopAckTimer();
+        this.stopNrTimer();
+        this.counters = {
+            txData: 0,
+            txAllFrames: 0,
+            txDataFrames: 0,
+            txAckFrames: 0,
+            txNakFrames: 0,
+            txReDataFrames: 0,
+            // txN0Frames: 0,
+            txN1Frames: 0,
+            txCancelled: 0,
+            rxData: 0,
+            rxAllFrames: 0,
+            rxDataFrames: 0,
+            rxAckFrames: 0,
+            rxNakFrames: 0,
+            rxReDataFrames: 0,
+            // rxN0Frames: 0,
+            rxN1Frames: 0,
+            rxCancelled: 0,
+            rxCrcErrors: 0,
+            rxCommErrors: 0,
+            rxTooShort: 0,
+            rxTooLong: 0,
+            rxBadControl: 0,
+            rxBadLength: 0,
+            rxBadAckNumber: 0,
+            rxNoBuffer: 0,
+            rxDuplicates: 0,
+            rxOutOfSequence: 0,
+            rxAckTimeouts: 0,
+        };
+        // All transmit buffers are put into txFree, and txQueue and reTxQueue are empty.
+        this.txQueue.tail = undefined;
+        this.reTxQueue.tail = undefined;
+        this.txFree.link = undefined;
+        for (let i = 0; i < consts_1.TX_POOL_BUFFERS; i++) {
+            this.txFree.freeBuffer((this.txPool[i] = new queues_1.EzspBuffer()));
+        }
+        // All receive buffers are put into rxFree, and rxQueue is empty.
+        this.rxQueue.tail = undefined;
+        this.rxFree.link = undefined;
+        for (let i = 0; i < consts_1.EZSP_HOST_RX_POOL_SIZE; i++) {
+            this.rxFree.freeBuffer((this.rxPool[i] = new queues_1.EzspBuffer()));
+        }
+    }
+    /**
+     * Check if port is valid, open, and not closing.
+     */
+    get portOpen() {
+        if (this.closing) {
+            return false;
+        }
+        if (socketPortUtils_1.default.isTcpPath(this.portOptions.path)) {
+            return this.socketPort ? !this.socketPort.closed : false;
+        }
+        else {
+            return this.serialPort ? this.serialPort.isOpen : false;
+        }
+    }
+    /**
+     * Get max wait time before response is considered timed out.
+     */
+    get responseTimeout() {
+        return consts_1.ASH_MAX_TIMEOUTS * CONFIG_ACK_TIME_MAX;
+    }
+    /**
+     * Indicates if the host is in the Connected state.
+     * If not, the host and NCP cannot exchange DATA frames.
+     * Note that this function does not actively confirm that communication with NCP is healthy, but simply returns its last known status.
+     *
+     * @returns
+     * - true  - host and NCP can exchange DATA frames
+     * - false - host and NCP cannot now exchange DATA frames
+     */
+    get connected() {
+        return (this.flags & Flag.CONNECTED) !== 0;
+    }
+    /**
+     * Has nothing to do...
+     */
+    get idle() {
+        return (!this.decodeInProgress && // don't have a partial frame
+            // && (this.serial.readAvailable() === EzspStatus.NO_RX_DATA) // no rx data
+            this.rxQueue.empty && // no rx frames to process
+            !this.ncpHasCallbacks && // no pending callbacks
+            this.flags === Flag.CONNECTED && // no pending ACKs, NAKs, etc.
+            this.ackTx === this.frmRx && // do not need to send an ACK
+            this.ackRx === this.frmTx && // not waiting to receive an ACK
+            this.sendState === SendState.IDLE && // nothing being transmitted now
+            this.txQueue.empty // nothing waiting to transmit
+        // && this.serial.outputIsIdle()          // nothing in OS buffers or UART FIFO
+        );
+    }
+    /**
+     * Init the serial or socket port and hook parser/writer.
+     * NOTE: This is the only function that throws/rejects in the ASH layer (caught by resetNcp and turned into an EzspStatus).
+     */
+    async initPort() {
+        await this.closePort(); // will do nothing if nothing's open
+        if (!socketPortUtils_1.default.isTcpPath(this.portOptions.path)) {
+            const serialOpts = {
+                path: this.portOptions.path,
+                baudRate: typeof this.portOptions.baudRate === 'number' ? this.portOptions.baudRate : 115200,
+                rtscts: typeof this.portOptions.rtscts === 'boolean' ? this.portOptions.rtscts : false,
+                autoOpen: false,
+                parity: 'none',
+                stopBits: 1,
+                xon: false,
+                xoff: false,
+            };
+            // enable software flow control if RTS/CTS not enabled in config
+            if (!serialOpts.rtscts) {
+                logger_1.logger.info(`RTS/CTS config is off, enabling software flow control.`, NS);
+                serialOpts.xon = true;
+                serialOpts.xoff = true;
+            }
+            // @ts-expect-error Jest testing
+            if (this.portOptions.binding != undefined) {
+                // @ts-expect-error Jest testing
+                serialOpts.binding = this.portOptions.binding;
+            }
+            logger_1.logger.debug(() => `Opening serial port with ${JSON.stringify(serialOpts)}`, NS);
+            this.serialPort = new serialPort_1.SerialPort(serialOpts);
+            this.writer.pipe(this.serialPort);
+            this.serialPort.pipe(this.parser);
+            this.parser.on('data', this.onFrame.bind(this));
+            try {
+                await this.serialPort.asyncOpen();
+                logger_1.logger.info(`Serial port opened`, NS);
+                this.serialPort.once('close', this.onPortClose.bind(this));
+                this.serialPort.on('error', this.onPortError.bind(this));
+            }
+            catch (error) {
+                await this.stop();
+                throw error;
+            }
+        }
+        else {
+            const info = socketPortUtils_1.default.parseTcpPath(this.portOptions.path);
+            logger_1.logger.debug(`Opening TCP socket with ${info.host}:${info.port}`, NS);
+            this.socketPort = new node_net_1.Socket();
+            this.socketPort.setNoDelay(true);
+            this.socketPort.setKeepAlive(true, 15000);
+            this.writer.pipe(this.socketPort);
+            this.socketPort.pipe(this.parser);
+            this.parser.on('data', this.onFrame.bind(this));
+            return await new Promise((resolve, reject) => {
+                const openError = async (err) => {
+                    await this.stop();
+                    reject(err);
+                };
+                this.socketPort.on('connect', () => {
+                    logger_1.logger.debug(`Socket connected`, NS);
+                });
+                this.socketPort.on('ready', () => {
+                    logger_1.logger.info(`Socket ready`, NS);
+                    this.socketPort.removeListener('error', openError);
+                    this.socketPort.once('close', this.onPortClose.bind(this));
+                    this.socketPort.on('error', this.onPortError.bind(this));
+                    resolve();
+                });
+                this.socketPort.once('error', openError);
+                this.socketPort.connect(info.port, info.host);
+            });
+        }
+    }
+    /**
+     * Handle port closing
+     * @param err A boolean for Socket, an Error for serialport
+     */
+    async onPortClose(error) {
+        logger_1.logger.info(`Port closed.`, NS);
+        if (error && this.flags !== 0) {
+            logger_1.logger.info(`Port close ${error}`, NS);
+            this.flags = 0;
+            this.emit('fatalError', enums_1.EzspStatus.ERROR_SERIAL_INIT);
+        }
+    }
+    /**
+     * Handle port error
+     * @param error
+     */
+    async onPortError(error) {
+        logger_1.logger.error(`Port ${error}`, NS);
+        this.flags = 0;
+        this.emit('fatalError', enums_1.EzspStatus.ERROR_SERIAL_INIT);
+    }
+    /**
+     * Handle received frame from AshParser.
+     * @param buf
+     */
+    onFrame(buffer) {
+        const iCAN = buffer.lastIndexOf(enums_2.AshReservedByte.CANCEL); // should only be one, but just in case...
+        if (iCAN !== -1) {
+            // ignore the cancel before RSTACK
+            if (this.flags & Flag.CONNECTED) {
+                this.counters.rxCancelled += 1;
+                logger_1.logger.warning(`Frame(s) in progress cancelled in [${buffer.toString('hex')}]`, NS);
+            }
+            // get rid of everything up to the CAN flag and start reading frame from there, no need to loop through bytes in vain
+            buffer = buffer.subarray(iCAN + 1);
+        }
+        if (!buffer.length) {
+            // skip any CANCEL that results in empty frame (have yet to see one, but just in case...)
+            // shouldn't happen for any other reason, unless receiving bad stuff from port?
+            logger_1.logger.debug(`Received empty frame. Skipping.`, NS);
+            return;
+        }
+        const status = this.receiveFrame(buffer);
+        this.sendExec(); // always trigger to cover all cases
+        if (status !== enums_1.EzspStatus.SUCCESS && status !== enums_1.EzspStatus.ASH_IN_PROGRESS && status !== enums_1.EzspStatus.NO_RX_DATA) {
+            logger_1.logger.error(`Error while parsing received frame, status=${enums_1.EzspStatus[status]}.`, NS);
+            this.emit('fatalError', enums_1.EzspStatus.HOST_FATAL_ERROR);
+            return;
+        }
+    }
+    /**
+     * Initializes the ASH protocol, and waits until the NCP finishes rebooting, or a non-recoverable error occurs.
+     *
+     * @returns
+     * - EzspStatus.SUCCESS
+     * - EzspStatus.HOST_FATAL_ERROR
+     * - EzspStatus.ASH_NCP_FATAL_ERROR)
+     */
+    async start() {
+        if (!this.portOpen || this.flags & Flag.CONNECTED) {
+            return enums_1.EzspStatus.ERROR_INVALID_CALL;
+        }
+        logger_1.logger.info(`======== ASH starting ========`, NS);
+        try {
+            if (this.serialPort) {
+                await this.serialPort.asyncFlush(); // clear read/write buffers
+            }
+            else {
+                // XXX: Socket equiv?
+            }
+        }
+        catch (err) {
+            logger_1.logger.error(`Error while flushing before start: ${err}`, NS);
+        }
+        // block til RSTACK, fatal error or timeout
+        // NOTE: on average, this seems to take around 1000ms when successful
+        for (let i = 0; i < CONFIG_TIME_RST; i += CONFIG_TIME_RST_CHECK) {
+            this.sendExec();
+            if (this.flags & Flag.CONNECTED) {
+                logger_1.logger.info(`======== ASH started ========`, NS);
+                return enums_1.EzspStatus.SUCCESS;
+            }
+            else if (this.hostError !== enums_1.EzspStatus.NO_ERROR || this.ncpError !== enums_1.EzspStatus.NO_ERROR) {
+                // don't wait for inevitable fail, bail early, let retry logic in EZSP layer do its thing
+                break;
+            }
+            logger_1.logger.debug(`Waiting for RSTACK... ${i}/${CONFIG_TIME_RST}`, NS);
+            await (0, utils_1.wait)(CONFIG_TIME_RST_CHECK);
+        }
+        return enums_1.EzspStatus.HOST_FATAL_ERROR;
+    }
+    /**
+     * Stops the ASH protocol - flushes and closes the serial port, clears all queues, stops timers, etc.
+     */
+    async stop() {
+        this.closing = true;
+        this.logCounters();
+        await this.closePort();
+        logger_1.logger.info(`======== ASH stopped ========`, NS);
+    }
+    /**
+     * Close port and remove listeners.
+     * Does nothing if port not defined/open.
+     */
+    async closePort() {
+        this.flags = 0;
+        if (this.serialPort?.isOpen) {
+            try {
+                await this.serialPort.asyncFlushAndClose();
+            }
+            catch (err) {
+                logger_1.logger.error(`Failed to close serial port ${err}.`, NS);
+            }
+            this.serialPort.removeAllListeners();
+        }
+        else if (this.socketPort != null && !this.socketPort.closed) {
+            this.socketPort.destroy();
+            this.socketPort.removeAllListeners();
+        }
+    }
+    /**
+     * Initializes the ASH serial port and (if enabled) resets the NCP.
+     * The method used to do the reset is specified by the the host configuration parameter resetMethod.
+     *
+     * When the reset method is sending a RST frame, the caller should retry NCP resets a few times if it fails.
+     *
+     * @returns
+     * - EzspStatus.SUCCESS
+     * - EzspStatus.HOST_FATAL_ERROR
+     */
+    async resetNcp() {
+        if (this.closing) {
+            return enums_1.EzspStatus.ERROR_INVALID_CALL;
+        }
+        logger_1.logger.info(`======== ASH Adapter reset ========`, NS);
+        // ask ncp to reset itself using RST frame
+        try {
+            if (!this.portOpen) {
+                await this.initPort();
+            }
+            this.flags = Flag.RST | Flag.CAN;
+            return enums_1.EzspStatus.SUCCESS;
+        }
+        catch (err) {
+            logger_1.logger.error(`Failed to init port with error ${err}`, NS);
+            this.hostError = enums_1.EzspStatus.HOST_FATAL_ERROR;
+            return this.hostError;
+        }
+    }
+    /**
+     * Adds a DATA frame to the transmit queue to send to the NCP.
+     * Frames that are too long or too short will not be sent, and frames will not be added to the queue
+     * if the host is not in the Connected state, or the NCP is not ready to receive a DATA frame or if there
+     * is no room in the queue;
+     *
+     * @param len    length of data field
+     * @param inBuf  array containing the data to be sent
+     *
+     * @returns
+     * - EzspStatus.SUCCESS
+     * - EzspStatus.NO_TX_SPACE
+     * - EzspStatus.DATA_FRAME_TOO_SHORT
+     * - EzspStatus.DATA_FRAME_TOO_LONG
+     * - EzspStatus.NOT_CONNECTED
+     */
+    send(len, inBuf) {
+        // Check for errors that might have been detected
+        if (this.hostError !== enums_1.EzspStatus.NO_ERROR) {
+            return enums_1.EzspStatus.HOST_FATAL_ERROR;
+        }
+        if (this.ncpError !== enums_1.EzspStatus.NO_ERROR) {
+            return enums_1.EzspStatus.ASH_NCP_FATAL_ERROR;
+        }
+        // After verifying that the data field length is within bounds,
+        // copies data frame to a buffer and appends it to the transmit queue.
+        if (len < consts_1.ASH_MIN_DATA_FIELD_LEN) {
+            return enums_1.EzspStatus.DATA_FRAME_TOO_SHORT;
+        }
+        else if (len > consts_1.ASH_MAX_DATA_FIELD_LEN) {
+            return enums_1.EzspStatus.DATA_FRAME_TOO_LONG;
+        }
+        if (!(this.flags & Flag.CONNECTED)) {
+            return enums_1.EzspStatus.NOT_CONNECTED;
+        }
+        const buffer = this.txFree.allocBuffer();
+        if (buffer === undefined) {
+            return enums_1.EzspStatus.NO_TX_SPACE;
+        }
+        inBuf.copy(buffer.data, 0, 0, len);
+        buffer.len = len;
+        this.randomizeBuffer(buffer.data, buffer.len); // IN/OUT data
+        this.txQueue.addTail(buffer);
+        this.sendExec();
+        return enums_1.EzspStatus.SUCCESS;
+    }
+    /**
+     * Manages outgoing communication to the NCP, including DATA frames as well as the frames used for
+     * initialization and error detection and recovery.
+     */
+    sendExec() {
+        let outByte = 0x00;
+        let inByte = 0x00;
+        let len = 0;
+        let buffer;
+        // Check for received acknowledgement timer expiry
+        if (this.ackTimerHasExpired()) {
+            if (this.flags & Flag.CONNECTED) {
+                const reTx = this.flags & Flag.RETX;
+                const expectedFrm = reTx ? this.frmReTx : this.frmTx;
+                if (this.ackRx !== expectedFrm) {
+                    this.counters.rxAckTimeouts += 1;
+                    this.adjustAckPeriod(true);
+                    logger_1.logger.debug(`Timer expired waiting for ACK for ${reTx ? 'frmReTx' : 'frmTx'}=${expectedFrm}, ackRx=${this.ackRx}`, NS);
+                    if (++this.timeouts >= consts_1.ASH_MAX_TIMEOUTS) {
+                        this.hostDisconnect(enums_1.EzspStatus.ASH_ERROR_TIMEOUTS);
+                        return;
+                    }
+                    this.startRetransmission();
+                }
+                else {
+                    this.stopAckTimer();
+                }
+            } /* else {
+                this.hostDisconnect(EzspStatus.ASH_ERROR_RESET_FAIL);
+            }*/
+            // let Ezsp layer retry logic handle timeout
+        }
+        while (this.writer.writeAvailable()) {
+            // Send ASH_CAN character immediately, ahead of any other transmit data
+            if (this.flags & Flag.CAN) {
+                if (this.sendState === SendState.IDLE) {
+                    // sending RST or just woke NCP
+                    this.writer.writeByte(enums_2.AshReservedByte.CANCEL);
+                }
+                else if (this.sendState === SendState.TX_DATA) {
+                    // cancel frame in progress
+                    this.counters.txCancelled += 1;
+                    this.writer.writeByte(enums_2.AshReservedByte.CANCEL);
+                    this.stopAckTimer();
+                    this.sendState = SendState.IDLE;
+                }
+                this.flags &= ~Flag.CAN;
+                continue;
+            }
+            switch (this.sendState) {
+                case SendState.IDLE: {
+                    // In between frames - do some housekeeping and decide what to send next
+                    // If retransmitting, set the next frame to send to the last ackNum
+                    // received, then check to see if retransmission is now complete.
+                    if (this.flags & Flag.RETX) {
+                        if ((0, math_1.withinRange)(this.frmReTx, this.ackRx, this.frmTx)) {
+                            this.frmReTx = this.ackRx;
+                        }
+                        if (this.frmReTx === this.frmTx) {
+                            this.flags &= ~Flag.RETX;
+                            this.scrubReTxQueue();
+                        }
+                    }
+                    // restrain ncp if needed
+                    this.dataFrameFlowControl();
+                    // See if a short frame is flagged to be sent
+                    // The order of the tests below - RST, NAK and ACK -
+                    // sets the relative priority of sending these frame types.
+                    if (this.flags & Flag.RST) {
+                        this.txSHBuffer[0] = enums_2.AshFrameType.RST;
+                        this.setAndStartAckTimer(CONFIG_TIME_RST);
+                        len = 1;
+                        this.flags &= ~(Flag.RST | Flag.NAK | Flag.ACK);
+                        this.sendState = SendState.SHFRAME;
+                        logger_1.logger.debug(`---> [FRAME type=RST]`, NS);
+                    }
+                    else if (this.flags & (Flag.NAK | Flag.ACK)) {
+                        if (this.flags & Flag.NAK) {
+                            this.txSHBuffer[0] = enums_2.AshFrameType.NAK + (this.frmRx << consts_1.ASH_ACKNUM_BIT);
+                            this.flags &= ~(Flag.NRTX | Flag.NAK | Flag.ACK);
+                            logger_1.logger.debug(`---> [FRAME type=NAK frmRx=${this.frmRx}](ackRx=${this.ackRx})`, NS);
+                        }
+                        else {
+                            this.txSHBuffer[0] = enums_2.AshFrameType.ACK + (this.frmRx << consts_1.ASH_ACKNUM_BIT);
+                            this.flags &= ~(Flag.NRTX | Flag.ACK);
+                            logger_1.logger.debug(`---> [FRAME type=ACK frmRx=${this.frmRx}](ackRx=${this.ackRx})`, NS);
+                        }
+                        if (this.flags & Flag.NR) {
+                            this.txSHBuffer[0] |= consts_1.ASH_NFLAG_MASK;
+                            this.flags |= Flag.NRTX;
+                            this.startNrTimer();
+                        }
+                        this.ackTx = this.frmRx;
+                        len = 1;
+                        this.sendState = SendState.SHFRAME;
+                    }
+                    else if (this.flags & Flag.RETX) {
+                        // Retransmitting DATA frames for error recovery
+                        // buffer assumed valid from loop logic
+                        buffer = this.reTxQueue.getNthEntry((0, math_1.mod8)(this.frmTx - this.frmReTx));
+                        len = buffer.len + 1;
+                        this.txSHBuffer[0] = enums_2.AshFrameType.DATA | (this.frmReTx << consts_1.ASH_FRMNUM_BIT) | (this.frmRx << consts_1.ASH_ACKNUM_BIT) | consts_1.ASH_RFLAG_MASK;
+                        this.sendState = SendState.RETX_DATA;
+                        logger_1.logger.debug(`---> [FRAME type=DATA_RETX frmReTx=${this.frmReTx} frmRx=${this.frmRx}](ackRx=${this.ackRx} frmTx=${this.frmTx})`, NS);
+                    }
+                    else if (this.ackTx != this.frmRx) {
+                        // An ACK should be generated
+                        this.flags |= Flag.ACK;
+                        break;
+                    }
+                    else if (!this.txQueue.empty && (0, math_1.withinRange)(this.ackRx, this.frmTx, this.ackRx + exports.CONFIG_TX_K - 1)) {
+                        // Send a DATA frame if ready
+                        buffer = this.txQueue.head;
+                        len = buffer.len + 1;
+                        this.counters.txData += len - 1;
+                        this.txSHBuffer[0] = enums_2.AshFrameType.DATA | (this.frmTx << consts_1.ASH_FRMNUM_BIT) | (this.frmRx << consts_1.ASH_ACKNUM_BIT);
+                        this.sendState = SendState.TX_DATA;
+                        logger_1.logger.debug(`---> [FRAME type=DATA frmTx=${this.frmTx} frmRx=${this.frmRx}](ackRx=${this.ackRx})`, NS);
+                    }
+                    else {
+                        // Otherwise there's nothing to send
+                        this.writer.writeFlush();
+                        return;
+                    }
+                    this.countFrame(true);
+                    // Start frame - encodeByte() is inited by a non-zero length argument
+                    outByte = this.encodeByte(len, this.txSHBuffer[0]);
+                    this.writer.writeByte(outByte);
+                    break;
+                }
+                case SendState.SHFRAME: {
+                    // sending short frame
+                    if (this.txOffset !== 0xff) {
+                        inByte = this.txSHBuffer[this.txOffset];
+                        outByte = this.encodeByte(0, inByte);
+                        this.writer.writeByte(outByte);
+                    }
+                    else {
+                        this.sendState = SendState.IDLE;
+                    }
+                    break;
+                }
+                case SendState.TX_DATA:
+                case SendState.RETX_DATA: {
+                    // sending OR resending data frame
+                    if (this.txOffset !== 0xff) {
+                        // buffer assumed valid from loop logic
+                        inByte = this.txOffset ? buffer.data[this.txOffset - 1] : this.txSHBuffer[0];
+                        outByte = this.encodeByte(0, inByte);
+                        this.writer.writeByte(outByte);
+                    }
+                    else {
+                        if (this.sendState === SendState.TX_DATA) {
+                            this.frmTx = (0, math_1.inc8)(this.frmTx);
+                            buffer = this.txQueue.removeHead();
+                            this.reTxQueue.addTail(buffer);
+                        }
+                        else {
+                            this.frmReTx = (0, math_1.inc8)(this.frmReTx);
+                        }
+                        if (this.ackTimerIsNotRunning()) {
+                            this.startAckTimer();
+                        }
+                        this.ackTx = this.frmRx;
+                        this.sendState = SendState.IDLE;
+                    }
+                    break;
+                }
+            }
+        }
+        this.writer.writeFlush();
+    }
+    /**
+     * Retrieve a frame and accept, reTx, reject, fail based on type & validity in current state.
+     * @returns
+     * - EzspStatus.SUCCESS On valid RSTACK or valid DATA frame.
+     * - EzspStatus.ASH_IN_PROGRESS
+     * - EzspStatus.NO_RX_DATA
+     * - EzspStatus.NO_RX_SPACE
+     * - EzspStatus.HOST_FATAL_ERROR
+     * - EzspStatus.ASH_NCP_FATAL_ERROR
+     */
+    receiveFrame(buffer) {
+        // Check for errors that might have been detected
+        if (this.hostError !== enums_1.EzspStatus.NO_ERROR) {
+            return enums_1.EzspStatus.HOST_FATAL_ERROR;
+        }
+        if (this.ncpError !== enums_1.EzspStatus.NO_ERROR) {
+            return enums_1.EzspStatus.ASH_NCP_FATAL_ERROR;
+        }
+        let ackNum = 0;
+        let frmNum = 0;
+        let frameType = enums_2.AshFrameType.INVALID;
+        // Read data from serial port and assemble a frame until complete, aborted
+        // due to an error, cancelled, or there is no more serial data available.
+        const status = this.readFrame(buffer);
+        switch (status) {
+            case enums_1.EzspStatus.SUCCESS:
+                break;
+            case enums_1.EzspStatus.ASH_IN_PROGRESS:
+                // should have a complete frame by now, if not, don't process further
+                return enums_1.EzspStatus.NO_RX_DATA;
+            case enums_1.EzspStatus.ASH_CANCELLED:
+                // should have been taken out in onFrame
+                return this.hostDisconnect(status);
+            case enums_1.EzspStatus.ASH_BAD_CRC:
+                this.counters.rxCrcErrors += 1;
+                this.rejectFrame();
+                logger_1.logger.error(`Received frame with CRC error`, NS);
+                return enums_1.EzspStatus.NO_RX_DATA;
+            case enums_1.EzspStatus.ASH_COMM_ERROR:
+                this.counters.rxCommErrors += 1;
+                this.rejectFrame();
+                logger_1.logger.error(`Received frame with comm error`, NS);
+                return enums_1.EzspStatus.NO_RX_DATA;
+            case enums_1.EzspStatus.ASH_TOO_SHORT:
+                this.counters.rxTooShort += 1;
+                this.rejectFrame();
+                logger_1.logger.error(`Received frame shorter than minimum`, NS);
+                return enums_1.EzspStatus.NO_RX_DATA;
+            case enums_1.EzspStatus.ASH_TOO_LONG:
+                this.counters.rxTooLong += 1;
+                this.rejectFrame();
+                logger_1.logger.error(`Received frame longer than maximum`, NS);
+                return enums_1.EzspStatus.NO_RX_DATA;
+            case enums_1.EzspStatus.ASH_ERROR_XON_XOFF:
+                return this.hostDisconnect(status);
+            default:
+                logger_1.logger.error(`Unhandled error while receiving frame, status=${enums_1.EzspStatus[status]}.`, NS);
+                return this.hostDisconnect(enums_1.EzspStatus.HOST_FATAL_ERROR);
+        }
+        // Got a complete frame - validate its control and length.
+        // On an error the type returned will be TYPE_INVALID.
+        frameType = this.getFrameType(this.rxSHBuffer[0], this.rxLen);
+        // Free buffer allocated for a received frame if:
+        //    DATA frame, and out of order
+        //    DATA frame, and not in the CONNECTED state
+        //    not a DATA frame
+        if (frameType === enums_2.AshFrameType.DATA) {
+            if (!(this.flags & Flag.CONNECTED) || ashGetFrmNum(this.rxSHBuffer[0]) !== this.frmRx) {
+                this.freeAllocatedRxBuffer();
+            }
+        }
+        else {
+            this.freeAllocatedRxBuffer();
+        }
+        const frameTypeStr = enums_2.AshFrameType[frameType];
+        logger_1.logger.debug(`<--- [FRAME type=${frameTypeStr}]`, NS);
+        this.countFrame(false);
+        // Process frames received while not in the connected state -
+        // ignore everything except RSTACK and ERROR frames
+        if (!(this.flags & Flag.CONNECTED)) {
+            if (frameType === enums_2.AshFrameType.RSTACK) {
+                // RSTACK frames have the ncp ASH version in the first data field byte,
+                // and the reset reason in the second byte
+                if (this.rxSHBuffer[1] !== consts_1.ASH_VERSION) {
+                    return this.hostDisconnect(enums_1.EzspStatus.ASH_ERROR_VERSION);
+                }
+                // Ignore a RSTACK if the reset reason doesn't match our reset method
+                if (this.rxSHBuffer[2] !== enums_2.NcpFailedCode.RESET_SOFTWARE) {
+                    return enums_1.EzspStatus.ASH_IN_PROGRESS;
+                }
+                this.ncpError = enums_1.EzspStatus.NO_ERROR;
+                this.stopAckTimer();
+                this.timeouts = 0;
+                this.setAckPeriod(CONFIG_ACK_TIME_INIT);
+                this.flags = Flag.CONNECTED | Flag.ACK;
+                logger_1.logger.info(`======== ASH connected ========`, NS);
+                return enums_1.EzspStatus.SUCCESS;
+            }
+            else if (frameType === enums_2.AshFrameType.ERROR) {
+                logger_1.logger.error(`Received ERROR from adapter while connecting, with code=${enums_2.NcpFailedCode[this.rxSHBuffer[2]]}.`, NS);
+                // let Ezsp retry logic handle error
+                // return this.ncpDisconnect(EzspStatus.ASH_NCP_FATAL_ERROR);
+            }
+            return enums_1.EzspStatus.ASH_IN_PROGRESS;
+        }
+        // Connected - process the ackNum in ACK, NAK and DATA frames
+        if (frameType === enums_2.AshFrameType.DATA || frameType === enums_2.AshFrameType.ACK || frameType === enums_2.AshFrameType.NAK) {
+            ackNum = ashGetACKNum(this.rxSHBuffer[0]);
+            logger_1.logger.debug(`<--- [FRAME type=${frameTypeStr} ackNum=${ackNum}](ackRx=${this.ackRx} frmTx=${this.frmTx})`, NS);
+            if (!(0, math_1.withinRange)(this.ackRx, ackNum, this.frmTx)) {
+                this.counters.rxBadAckNumber += 1;
+                logger_1.logger.debug(`<-x- [FRAME type=${frameTypeStr} ackNum=${ackNum}] Invalid ACK num; not within <${this.ackRx}-${this.frmTx}>`, NS);
+                frameType = enums_2.AshFrameType.INVALID;
+            }
+            else if (ackNum !== this.ackRx) {
+                // new frame(s) ACK'ed?
+                this.ackRx = ackNum;
+                this.timeouts = 0;
+                if (this.flags & Flag.RETX) {
+                    // start timer if unACK'ed frames
+                    this.stopAckTimer();
+                    if (ackNum !== this.frmReTx) {
+                        this.startAckTimer();
+                    }
+                }
+                else {
+                    this.adjustAckPeriod(false); // factor ACK time into period
+                    if (ackNum !== this.frmTx) {
+                        // if more unACK'ed frames,
+                        this.startAckTimer(); // then restart ACK timer
+                    }
+                    this.scrubReTxQueue(); // free buffer(s) in ReTx queue
+                }
+            }
+        }
+        // Process frames received while connected
+        switch (frameType) {
+            case enums_2.AshFrameType.DATA: {
+                frmNum = ashGetFrmNum(this.rxSHBuffer[0]);
+                const frameStr = `[FRAME type=${frameTypeStr} ackNum=${ackNum} frmNum=${frmNum}](frmRx=${this.frmRx})`;
+                if (frmNum === this.frmRx) {
+                    // is frame in sequence?
+                    if (this.rxDataBuffer == null) {
+                        // valid frame but no memory?
+                        this.counters.rxNoBuffer += 1;
+                        logger_1.logger.debug(`<-x- ${frameStr} No buffer available`, NS);
+                        this.rejectFrame();
+                        return enums_1.EzspStatus.NO_RX_SPACE;
+                    }
+                    if (this.rxSHBuffer[0] & consts_1.ASH_RFLAG_MASK) {
+                        // if retransmitted, force ACK
+                        this.flags |= Flag.ACK;
+                    }
+                    this.flags &= ~(Flag.REJ | Flag.NAK); // clear the REJ condition
+                    this.frmRx = (0, math_1.inc8)(this.frmRx);
+                    this.randomizeBuffer(this.rxDataBuffer.data, this.rxDataBuffer.len); // IN/OUT data
+                    this.rxQueue.addTail(this.rxDataBuffer); // add frame to receive queue
+                    logger_1.logger.debug(`<--- ${frameStr} Added to rxQueue`, NS);
+                    this.counters.rxData += this.rxDataBuffer.len;
+                    setImmediate(() => this.emit('frame'));
+                    return enums_1.EzspStatus.SUCCESS;
+                }
+                else {
+                    // frame is out of sequence
+                    if (this.rxSHBuffer[0] & consts_1.ASH_RFLAG_MASK) {
+                        // if retransmitted, force ACK
+                        this.counters.rxDuplicates += 1;
+                        this.flags |= Flag.ACK;
+                    }
+                    else {
+                        // 1st OOS? then set REJ, send NAK
+                        if ((this.flags & Flag.REJ) === 0) {
+                            this.counters.rxOutOfSequence += 1;
+                            logger_1.logger.debug(`<-x- ${frameStr} Out of sequence: expected ${this.frmRx}; got ${frmNum}.`, NS);
+                        }
+                        this.rejectFrame();
+                    }
+                }
+                break;
+            }
+            case enums_2.AshFrameType.ACK:
+                // already fully processed
+                break;
+            case enums_2.AshFrameType.NAK:
+                // start retransmission if needed
+                this.startRetransmission();
+                break;
+            case enums_2.AshFrameType.RSTACK:
+                // unexpected ncp reset
+                logger_1.logger.error(`Received unexpected reset from adapter, with reason=${enums_2.NcpFailedCode[this.rxSHBuffer[2]]}.`, NS);
+                this.ncpError = enums_1.EzspStatus.ASH_NCP_FATAL_ERROR;
+                return this.hostDisconnect(enums_1.EzspStatus.ASH_ERROR_NCP_RESET);
+            case enums_2.AshFrameType.ERROR:
+                // ncp error
+                logger_1.logger.error(`Received ERROR from adapter, with code=${enums_2.NcpFailedCode[this.rxSHBuffer[2]]}.`, NS);
+                return this.ncpDisconnect(enums_1.EzspStatus.ASH_NCP_FATAL_ERROR);
+            case enums_2.AshFrameType.INVALID:
+                // reject invalid frames
+                logger_1.logger.debug(`<-x- [FRAME type=${frameTypeStr}] Rejecting. ${this.rxSHBuffer.toString('hex')}`, NS);
+                this.rejectFrame();
+                break;
+        }
+        return enums_1.EzspStatus.ASH_IN_PROGRESS;
+    }
+    /**
+     * If the last control byte received was a DATA control, and we are connected and not already in the reject condition,
+     * then send a NAK and set the reject condition.
+     */
+    rejectFrame() {
+        if ((this.rxSHBuffer[0] & consts_1.ASH_DFRAME_MASK) === enums_2.AshFrameType.DATA && (this.flags & (Flag.REJ | Flag.CONNECTED)) === Flag.CONNECTED) {
+            this.flags |= Flag.REJ | Flag.NAK;
+        }
+    }
+    /**
+     * Retrieve and process serial bytes.
+     * @returns
+     */
+    readFrame(buffer) {
+        let status = enums_1.EzspStatus.ERROR_INVALID_CALL; // no actual data to read, something's very wrong
+        let index = 0;
+        // let inByte: number = 0x00;
+        let outByte = 0x00;
+        if (!this.decodeInProgress) {
+            this.rxLen = 0;
+            this.rxDataBuffer = undefined;
+        }
+        for (const inByte of buffer) {
+            // 0xFF byte signals a callback is pending when between frames in synchronous (polled) callback mode.
+            if (!this.decodeInProgress && inByte === consts_1.ASH_WAKE) {
+                if (this.ncpSleepEnabled) {
+                    this.ncpHasCallbacks = true;
+                }
+                status = enums_1.EzspStatus.ASH_IN_PROGRESS;
+                continue;
+            }
+            // Decode next input byte - note that many input bytes do not produce
+            // an output byte. Return on any error in decoding.
+            index = this.rxLen;
+            [status, outByte, this.rxLen] = this.decodeByte(inByte, outByte, this.rxLen);
+            // discard an invalid frame
+            if (status !== enums_1.EzspStatus.ASH_IN_PROGRESS && status !== enums_1.EzspStatus.SUCCESS) {
+                this.freeAllocatedRxBuffer();
+                break;
+            }
+            // if input byte produced an output byte
+            if (this.rxLen !== index) {
+                if (this.rxLen <= consts_1.SH_RX_BUFFER_LEN) {
+                    // if a short frame, return in rxBuffer
+                    this.rxSHBuffer[index] = outByte;
+                }
+                else {
+                    // if a longer DATA frame, allocate an EzspBuffer for it.
+                    // (Note the control byte is always returned in shRxBuffer[0].
+                    // Even if no buffer can be allocated, the control's ackNum must be processed.)
+                    if (this.rxLen === consts_1.SH_RX_BUFFER_LEN + 1) {
+                        // alloc buffer, copy prior data
+                        this.rxDataBuffer = this.rxFree.allocBuffer();
+                        if (this.rxDataBuffer !== undefined) {
+                            // const len = SH_RX_BUFFER_LEN - 1;
+                            // (void) memcpy(this.rxDataBuffer.data, this.shRxBuffer + 1, SH_RX_BUFFER_LEN - 1);
+                            this.rxSHBuffer.copy(this.rxDataBuffer.data, 0, 1, consts_1.SH_RX_BUFFER_LEN);
+                            this.rxDataBuffer.len = consts_1.SH_RX_BUFFER_LEN - 1;
+                        }
+                    }
+                    if (this.rxDataBuffer !== undefined) {
+                        // copy next byte to buffer
+                        this.rxDataBuffer.data[index - 1] = outByte; // -1 since control is omitted
+                        this.rxDataBuffer.len = index;
+                    }
+                }
+            }
+            if (status !== enums_1.EzspStatus.ASH_IN_PROGRESS) {
+                break;
+            }
+        }
+        return status;
+    }
+    /**
+     *
+     */
+    freeAllocatedRxBuffer() {
+        if (this.rxDataBuffer !== undefined) {
+            this.rxFree.freeBuffer(this.rxDataBuffer);
+            this.rxDataBuffer = undefined;
+        }
+    }
+    /**
+     *
+     */
+    scrubReTxQueue() {
+        let buffer;
+        while (this.ackRx !== this.frmReTxHead) {
+            buffer = this.reTxQueue.removeHead();
+            this.txFree.freeBuffer(buffer);
+            this.frmReTxHead = (0, math_1.inc8)(this.frmReTxHead);
+        }
+    }
+    /**
+     * If not already retransmitting, and there are unacked frames, start retransmitting after the last frame that was acked.
+     */
+    startRetransmission() {
+        if (!(this.flags & Flag.RETX) && this.ackRx != this.frmTx) {
+            this.stopAckTimer();
+            this.frmReTx = this.ackRx;
+            this.flags |= Flag.RETX | Flag.CAN;
+        }
+    }
+    /**
+     * Check free rx buffers to see whether able to receive DATA frames: set or clear NR flag appropriately.
+     * Inform ncp of our status using the nFlag in ACKs and NAKs.
+     * Note that not ready status must be refreshed if it persists beyond a maximum time limit.
+     */
+    dataFrameFlowControl() {
+        if (this.flags & Flag.CONNECTED) {
+            // Set/clear NR flag based on the number of buffers free
+            if (this.rxFree.length < CONFIG_NR_LOW_LIMIT) {
+                this.flags |= Flag.NR;
+                logger_1.logger.warning(`NOT READY - Signaling adapter`, NS);
+            }
+            else if (this.rxFree.length > CONFIG_NR_HIGH_LIMIT) {
+                this.flags &= ~Flag.NR;
+                this.stopNrTimer(); // needed??
+            }
+            // Force an ACK (or possibly NAK) if we need to send an updated nFlag
+            // due to either a changed NR status or to refresh a set nFlag
+            if (this.flags & Flag.NR) {
+                if (!(this.flags & Flag.NRTX) || this.nrTimerHasExpired()) {
+                    this.flags |= Flag.ACK;
+                    this.startNrTimer();
+                }
+            }
+            else {
+                this.nrTimerHasExpired(); // ensure timer checked often
+                if (this.flags & Flag.NRTX) {
+                    this.flags |= Flag.ACK;
+                    this.stopNrTimer(); // needed???
+                }
+            }
+        }
+        else {
+            this.stopNrTimer();
+            this.flags &= ~(Flag.NRTX | Flag.NR);
+        }
+    }
+    /**
+     * Sets a fatal error state at the Host level.
+     * @param error
+     * @returns EzspStatus.HOST_FATAL_ERROR
+     */
+    hostDisconnect(error) {
+        this.flags = 0;
+        this.hostError = error;
+        logger_1.logger.error(`ASH disconnected: ${enums_1.EzspStatus[error]} | Adapter status: ${enums_1.EzspStatus[this.ncpError]}`, NS);
+        return enums_1.EzspStatus.HOST_FATAL_ERROR;
+    }
+    /**
+     * Sets a fatal error state at the NCP level. Will require a reset.
+     * @param error
+     * @returns EzspStatus.ASH_NCP_FATAL_ERROR
+     */
+    ncpDisconnect(error) {
+        this.flags = 0;
+        this.ncpError = error;
+        logger_1.logger.error(`ASH disconnected | Adapter status: ${enums_1.EzspStatus[this.ncpError]}`, NS);
+        return enums_1.EzspStatus.ASH_NCP_FATAL_ERROR;
+    }
+    /**
+     * Same as randomizeArray(0, buffer, len).
+     * Returns buffer as-is if randomize is OFF.
+     * @param buffer IN/OUT
+     * @param len
+     */
+    randomizeBuffer(buffer, len) {
+        // If enabled, exclusive-OR buffer data with a pseudo-random sequence
+        if (CONFIG_RANDOMIZE) {
+            this.randomizeArray(0, buffer, len); // zero inits the random sequence
+        }
+    }
+    /**
+     * Randomizes array contents by XORing with an 8-bit pseudo random sequence.
+     * This reduces the likelihood that byte-stuffing will greatly increase the size of the payload.
+     * (This could happen if a DATA frame contained repeated instances of the same reserved byte value.)
+     *
+     * @param seed  zero initializes the random sequence a non-zero value continues from a previous invocation
+     * @param buf IN/OUT pointer to the array whose contents will be randomized
+     * @param len  number of bytes in the array to modify
+     * @returns  last value of the sequence.
+     *           If a buffer is processed in two or more chunks, as with linked buffers,
+     *           this value should be passed back as the value of the seed argument
+     */
+    randomizeArray(seed, buf, len) {
+        let outIdx = 0;
+        if (seed === 0) {
+            seed = consts_1.LFSR_SEED;
+        }
+        while (len--) {
+            // *buf++ ^= seed;
+            buf[outIdx++] ^= seed;
+            seed = seed & 1 ? (seed >> 1) ^ consts_1.LFSR_POLY : seed >> 1;
+        }
+        return seed;
+    }
+    /**
+     * Get the frame type from the control byte and validate it against the frame length.
+     * @param control
+     * @param len Frame length
+     * @returns AshFrameType.INVALID if bad control/length otherwise the frame type.
+     */
+    getFrameType(control, len) {
+        if (control === enums_2.AshFrameType.RSTACK) {
+            if (len === consts_1.ASH_FRAME_LEN_RSTACK) {
+                return enums_2.AshFrameType.RSTACK;
+            }
+        }
+        else if (control === enums_2.AshFrameType.ERROR) {
+            if (len === consts_1.ASH_FRAME_LEN_ERROR) {
+                return enums_2.AshFrameType.ERROR;
+            }
+        }
+        else if ((control & consts_1.ASH_DFRAME_MASK) === enums_2.AshFrameType.DATA) {
+            if (len >= consts_1.ASH_FRAME_LEN_DATA_MIN) {
+                return enums_2.AshFrameType.DATA;
+            }
+        }
+        else if ((control & consts_1.ASH_SHFRAME_MASK) === enums_2.AshFrameType.ACK) {
+            if (len === consts_1.ASH_FRAME_LEN_ACK) {
+                return enums_2.AshFrameType.ACK;
+            }
+        }
+        else if ((control & consts_1.ASH_SHFRAME_MASK) === enums_2.AshFrameType.NAK) {
+            if (len === consts_1.ASH_FRAME_LEN_NAK) {
+                return enums_2.AshFrameType.NAK;
+            }
+        }
+        else {
+            this.counters.rxBadControl += 1;
+            logger_1.logger.debug(`Frame illegal control ${control}.`, NS); // EzspStatus.ASH_BAD_CONTROL
+            return enums_2.AshFrameType.INVALID;
+        }
+        this.counters.rxBadLength += 1;
+        logger_1.logger.debug(`Frame illegal length ${len} for control ${control}.`, NS); // EzspStatus.ASH_BAD_LENGTH
+        return enums_2.AshFrameType.INVALID;
+    }
+    /**
+     * Encode byte for sending.
+     * @param len Start a new frame if non-zero
+     * @param byte
+     * @returns outByte
+     */
+    encodeByte(len, byte) {
+        // start a new frame if len is non-zero
+        if (len) {
+            this.encodeCount = len;
+            this.txOffset = 0;
+            this.encodeState = 0;
+            this.encodeEscFlag = false;
+            this.encodeCrc = 0xffff;
+        }
+        // was an escape last time?
+        if (this.encodeEscFlag) {
+            this.encodeEscFlag = false;
+            // send data byte with bit flipped
+            return this.encodeFlip;
+        }
+        // control and data field bytes
+        if (this.encodeState === 0) {
+            this.encodeCrc = (0, math_1.halCommonCrc16)(byte, this.encodeCrc);
+            if (--this.encodeCount === 0) {
+                this.encodeState = 1;
+            }
+            else {
+                ++this.txOffset;
+            }
+            return this.encodeStuffByte(byte);
+        }
+        else if (this.encodeState === 1) {
+            // CRC high byte
+            this.encodeState = 2;
+            return this.encodeStuffByte(this.encodeCrc >> 8);
+        }
+        else if (this.encodeState === 2) {
+            // CRC low byte
+            this.encodeState = 3;
+            return this.encodeStuffByte(this.encodeCrc & 0xff);
+        }
+        this.txOffset = 0xff;
+        return enums_2.AshReservedByte.FLAG;
+    }
+    /**
+     * Stuff byte as defined by ASH protocol.
+     * @param byte
+     * @returns
+     */
+    encodeStuffByte(byte) {
+        if (enums_2.AshReservedByte[byte] != null) {
+            // is special byte
+            this.encodeEscFlag = true;
+            this.encodeFlip = byte ^ consts_1.ASH_FLIP;
+            return enums_2.AshReservedByte.ESCAPE;
+        }
+        else {
+            return byte;
+        }
+    }
+    /**
+     * Decode received byte.
+     * @param byte
+     * @param inByte IN/OUT
+     * @param inLen IN/OUT
+     * @returns  [EzspStatus, outByte, outLen]
+     * - EzspStatus.ASH_IN_PROGRESS
+     * - EzspStatus.ASH_COMM_ERROR
+     * - EzspStatus.ASH_BAD_CRC
+     * - EzspStatus.ASH_TOO_SHORT
+     * - EzspStatus.ASH_TOO_LONG
+     * - EzspStatus.SUCCESS
+     * - EzspStatus.ASH_CANCELLED
+     * - EzspStatus.ASH_ERROR_XON_XOFF
+     */
+    decodeByte(byte, inByte, inLen) {
+        let status = enums_1.EzspStatus.ASH_IN_PROGRESS;
+        if (!this.decodeInProgress) {
+            this.decodeLen = 0;
+            this.decodeByte1 = 0;
+            this.decodeByte2 = 0;
+            this.decodeFlip = 0;
+            this.decodeCrc = 0xffff;
+        }
+        switch (byte) {
+            case enums_2.AshReservedByte.FLAG:
+                // flag byte (frame delimiter)
+                if (this.decodeLen === 0) {
+                    // if no frame data, not end flag, so ignore it
+                    this.decodeFlip = 0; // ignore isolated data escape between flags
+                    break;
+                }
+                else if (this.decodeLen === 0xff) {
+                    status = enums_1.EzspStatus.ASH_COMM_ERROR;
+                }
+                else if (this.decodeCrc !== (this.decodeByte2 << 8) + this.decodeByte1) {
+                    status = enums_1.EzspStatus.ASH_BAD_CRC;
+                }
+                else if (this.decodeLen < consts_1.ASH_MIN_FRAME_WITH_CRC_LEN) {
+                    status = enums_1.EzspStatus.ASH_TOO_SHORT;
+                }
+                else if (this.decodeLen > consts_1.ASH_MAX_FRAME_WITH_CRC_LEN) {
+                    status = enums_1.EzspStatus.ASH_TOO_LONG;
+                }
+                else {
+                    status = enums_1.EzspStatus.SUCCESS;
+                }
+                break;
+            case enums_2.AshReservedByte.ESCAPE:
+                // byte stuffing escape byte
+                this.decodeFlip = consts_1.ASH_FLIP;
+                break;
+            case enums_2.AshReservedByte.CANCEL:
+                // cancel frame without an error
+                status = enums_1.EzspStatus.ASH_CANCELLED;
+                break;
+            case enums_2.AshReservedByte.SUBSTITUTE:
+                // discard remainder of frame
+                this.decodeLen = 0xff; // special value flags low level comm error
+                break;
+            case enums_2.AshReservedByte.XON:
+            case enums_2.AshReservedByte.XOFF:
+                // If host is using RTS/CTS, ignore any XON/XOFFs received from the NCP.
+                // If using XON/XOFF, the host driver must remove them from the input stream.
+                // If it doesn't, it probably means the driver isn't setup for XON/XOFF,
+                // so issue an error to flag the serial port driver problem.
+                if (this.serialPort != null && !this.serialPort.settings.rtscts) {
+                    status = enums_1.EzspStatus.ASH_ERROR_XON_XOFF;
+                }
+                break;
+            default:
+                // a normal byte
+                byte ^= this.decodeFlip;
+                this.decodeFlip = 0;
+                if (this.decodeLen <= consts_1.ASH_MAX_FRAME_WITH_CRC_LEN) {
+                    // limit length to max + 1
+                    ++this.decodeLen;
+                }
+                if (this.decodeLen > consts_1.ASH_CRC_LEN) {
+                    // compute frame CRC even if too long
+                    this.decodeCrc = (0, math_1.halCommonCrc16)(this.decodeByte2, this.decodeCrc);
+                    if (this.decodeLen <= consts_1.ASH_MAX_FRAME_WITH_CRC_LEN) {
+                        // store to only max len
+                        inByte = this.decodeByte2;
+                        inLen = this.decodeLen - consts_1.ASH_CRC_LEN; // CRC is not output, reduce length
+                    }
+                }
+                this.decodeByte2 = this.decodeByte1;
+                this.decodeByte1 = byte;
+                break;
+        }
+        this.decodeInProgress = status === enums_1.EzspStatus.ASH_IN_PROGRESS;
+        return [status, inByte, inLen];
+    }
+    /**
+     * Starts the Not Ready timer
+     *
+     * On the host, this times nFlag refreshing when the host doesn't have room for callbacks for a prolonged period.
+     *
+     * On the NCP, if this times out the NCP resumes sending callbacks.
+     */
+    startNrTimer() {
+        this.nrTimer = Date.now() + CONFIG_NR_TIME;
+    }
+    /**
+     * Stop Not Ready timer (set to 0).
+     */
+    stopNrTimer() {
+        this.nrTimer = 0;
+    }
+    /**
+     * Tests whether the Not Ready timer has expired or has stopped. If expired, it is stopped.
+     *
+     * @returns  true if the Not Ready timer has expired or stopped
+     */
+    nrTimerHasExpired() {
+        if (this.nrTimer) {
+            if (Date.now() - this.nrTimer >= 0) {
+                this.nrTimer = 0;
+            }
+        }
+        return !this.nrTimer;
+    }
+    /**
+     * Indicates whether or not Not Ready timer is currently running.
+     *
+     * @return True if nrTime == 0
+     */
+    nrTimerIsNotRunning() {
+        return this.nrTimer === 0;
+    }
+    /**
+     * Sets the acknowledgement timer period (in msec) and stops the timer.
+     */
+    setAckPeriod(msec) {
+        this.ackPeriod = msec;
+        this.ackTimer = 0;
+    }
+    /**
+     * Sets the acknowledgement timer period (in msec), and starts the timer running.
+     */
+    setAndStartAckTimer(msec) {
+        this.setAckPeriod(msec);
+        this.startAckTimer();
+    }
+    /**
+     * Adapts the acknowledgement timer period to the observed ACK delay.
+     * If the timer is not running, it does nothing.
+     * If the timer has expired, the timeout period is doubled.
+     * If the timer has not expired, the elapsed time is fed into simple
+     *
+     * IIR filter:
+     *          T[n+1] = (7*T[n] + elapsedTime) / 8
+     *
+     * The timeout period, ackPeriod, is limited such that:
+     * config.ackTimeMin <= ackPeriod <= config.ackTimeMax.
+     *
+     * The acknowledgement timer is always stopped by this function.
+     *
+     * @param expired true if timer has expired
+     */
+    adjustAckPeriod(expired) {
+        if (expired) {
+            // if expired, double the period
+            this.ackPeriod += this.ackPeriod;
+        }
+        else if (this.ackTimer) {
+            // adjust period only if running
+            // time elapsed since timer was started
+            let temp = this.ackPeriod;
+            // compute time to receive acknowledgement, then stop timer
+            const lastAckTime = Date.now() - this.ackTimer;
+            temp = (temp << 3) - temp;
+            temp += lastAckTime << 2;
+            temp >>= 3;
+            this.ackPeriod = temp & 0xffff;
+        }
+        // keep ackPeriod within limits
+        if (this.ackPeriod > CONFIG_ACK_TIME_MAX) {
+            this.ackPeriod = CONFIG_ACK_TIME_MAX;
+        }
+        else if (this.ackPeriod < CONFIG_ACK_TIME_MIN) {
+            this.ackPeriod = CONFIG_ACK_TIME_MIN;
+        }
+        this.ackTimer = 0; // always stop the timer
+    }
+    /**
+     * Sets ACK Timer to the specified period and starts it running.
+     */
+    startAckTimer() {
+        this.ackTimer = Date.now();
+    }
+    /**
+     * Stops and clears ACK Timer.
+     */
+    stopAckTimer() {
+        this.ackTimer = 0;
+    }
+    /**
+     * Indicates whether or not ACK Timer has expired.
+     * If the timer is stopped (0) then it is not expired.
+     *
+     * @returns
+     */
+    ackTimerHasExpired() {
+        if (this.ackTimer === 0) {
+            // if timer is not running, return false
+            return false;
+        }
+        // return ((halCommonGetInt16uMillisecondTick() - this.ackTimer) >= this.ackPeriod);
+        return Date.now() - this.ackTimer >= this.ackPeriod;
+    }
+    /**
+     * Indicates whether or not ACK Timer is currently running (!= 0).
+     * The timer may be running even if expired.
+     */
+    ackTimerIsNotRunning() {
+        return this.ackTimer === 0;
+    }
+    /**
+     * Increase counters based on frame type and direction.
+     * @param sent True if frame being sent, false if being received.
+     */
+    countFrame(sent) {
+        let control;
+        if (sent) {
+            control = this.txSHBuffer[0];
+            this.counters.txAllFrames += 1;
+        }
+        else {
+            control = this.rxSHBuffer[0];
+            this.counters.rxAllFrames += 1;
+        }
+        if ((control & consts_1.ASH_DFRAME_MASK) === enums_2.AshFrameType.DATA) {
+            if (sent) {
+                if (control & consts_1.ASH_RFLAG_MASK) {
+                    this.counters.txReDataFrames += 1;
+                }
+                else {
+                    this.counters.txDataFrames += 1;
+                }
+            }
+            else {
+                if (control & consts_1.ASH_RFLAG_MASK) {
+                    this.counters.rxReDataFrames += 1;
+                }
+                else {
+                    this.counters.rxDataFrames += 1;
+                }
+            }
+        }
+        else if ((control & consts_1.ASH_SHFRAME_MASK) === enums_2.AshFrameType.ACK) {
+            if (sent) {
+                this.counters.txAckFrames += 1;
+                if (control & consts_1.ASH_NFLAG_MASK) {
+                    this.counters.txN1Frames += 1;
+                } /* else {
+                    this.counters.txN0Frames += 1;
+                }*/
+            }
+            else {
+                this.counters.rxAckFrames += 1;
+                if (control & consts_1.ASH_NFLAG_MASK) {
+                    this.counters.rxN1Frames += 1;
+                } /* else {
+                    this.counters.rxN0Frames += 1;
+                }*/
+            }
+        }
+        else if ((control & consts_1.ASH_SHFRAME_MASK) === enums_2.AshFrameType.NAK) {
+            if (sent) {
+                this.counters.txNakFrames += 1;
+                if (control & consts_1.ASH_NFLAG_MASK) {
+                    this.counters.txN1Frames += 1;
+                } /* else {
+                    this.counters.txN0Frames += 1;
+                }*/
+            }
+            else {
+                this.counters.rxNakFrames += 1;
+                if (control & consts_1.ASH_NFLAG_MASK) {
+                    this.counters.rxN1Frames += 1;
+                } /* else {
+                    this.counters.rxN0Frames += 1;
+                }*/
+            }
+        }
+    }
+    /**
+     * Read and clear ASH layer counters in the same manner as the NCP ones.
+     * @returns
+     */
+    readAndClearCounters() {
+        const counters = [
+            this.counters.txData,
+            this.counters.txAllFrames,
+            this.counters.txDataFrames,
+            this.counters.txAckFrames,
+            this.counters.txNakFrames,
+            this.counters.txReDataFrames,
+            this.counters.txN1Frames,
+            this.counters.txCancelled,
+            this.counters.rxData,
+            this.counters.rxAllFrames,
+            this.counters.rxDataFrames,
+            this.counters.rxAckFrames,
+            this.counters.rxNakFrames,
+            this.counters.rxReDataFrames,
+            this.counters.rxN1Frames,
+            this.counters.rxCancelled,
+            this.counters.rxCrcErrors,
+            this.counters.rxCommErrors,
+            this.counters.rxTooShort,
+            this.counters.rxTooLong,
+            this.counters.rxBadControl,
+            this.counters.rxBadLength,
+            this.counters.rxBadAckNumber,
+            this.counters.rxNoBuffer,
+            this.counters.rxDuplicates,
+            this.counters.rxOutOfSequence,
+            this.counters.rxAckTimeouts,
+        ];
+        for (const c in this.counters) {
+            this.counters[c] = 0;
+        }
+        return counters;
+    }
+    /**
+     * Log counters (pretty-formatted) as they are since last time they were cleared.
+     * Used on ASH layer stop to get 'pre-stop state'.
+     */
+    logCounters() {
+        logger_1.logger.info(`ASH COUNTERS since last clear:`, NS);
+        logger_1.logger.info(`  Total frames: RX=${this.counters.rxAllFrames}, TX=${this.counters.txAllFrames}`, NS);
+        logger_1.logger.info(`  Cancelled   : RX=${this.counters.rxCancelled}, TX=${this.counters.txCancelled}`, NS);
+        logger_1.logger.info(`  DATA frames : RX=${this.counters.rxDataFrames}, TX=${this.counters.txDataFrames}`, NS);
+        logger_1.logger.info(`  DATA bytes  : RX=${this.counters.rxData}, TX=${this.counters.txData}`, NS);
+        logger_1.logger.info(`  Retry frames: RX=${this.counters.rxReDataFrames}, TX=${this.counters.txReDataFrames}`, NS);
+        logger_1.logger.info(`  ACK frames  : RX=${this.counters.rxAckFrames}, TX=${this.counters.txAckFrames}`, NS);
+        logger_1.logger.info(`  NAK frames  : RX=${this.counters.rxNakFrames}, TX=${this.counters.txNakFrames}`, NS);
+        logger_1.logger.info(`  nRdy frames : RX=${this.counters.rxN1Frames}, TX=${this.counters.txN1Frames}`, NS);
+        logger_1.logger.info(`  CRC errors      : RX=${this.counters.rxCrcErrors}`, NS);
+        logger_1.logger.info(`  Comm errors     : RX=${this.counters.rxCommErrors}`, NS);
+        logger_1.logger.info(`  Length < minimum: RX=${this.counters.rxTooShort}`, NS);
+        logger_1.logger.info(`  Length > maximum: RX=${this.counters.rxTooLong}`, NS);
+        logger_1.logger.info(`  Bad controls    : RX=${this.counters.rxBadControl}`, NS);
+        logger_1.logger.info(`  Bad lengths     : RX=${this.counters.rxBadLength}`, NS);
+        logger_1.logger.info(`  Bad ACK numbers : RX=${this.counters.rxBadAckNumber}`, NS);
+        logger_1.logger.info(`  Out of buffers  : RX=${this.counters.rxNoBuffer}`, NS);
+        logger_1.logger.info(`  Retry dupes     : RX=${this.counters.rxDuplicates}`, NS);
+        logger_1.logger.info(`  Out of sequence : RX=${this.counters.rxOutOfSequence}`, NS);
+        logger_1.logger.info(`  ACK timeouts    : RX=${this.counters.rxAckTimeouts}`, NS);
+    }
+}
+exports.UartAsh = UartAsh;
+//# sourceMappingURL=ash.js.map