zigbee-herdsman 3.0.4 → 3.1.0

package/dist/adapter/ember/ezsp/enums.d.ts

@@ -1,990 +0,0 @@
-/** EZSP Frame IDs */
-export declare enum EzspFrameID {
-    VERSION = 0,
-    GET_CONFIGURATION_VALUE = 82,
-    SET_CONFIGURATION_VALUE = 83,
-    READ_ATTRIBUTE = 264,
-    WRITE_ATTRIBUTE = 265,
-    ADD_ENDPOINT = 2,
-    SET_POLICY = 85,
-    GET_POLICY = 86,
-    SEND_PAN_ID_UPDATE = 87,
-    GET_VALUE = 170,
-    GET_EXTENDED_VALUE = 3,
-    SET_VALUE = 171,
-    SET_PASSIVE_ACK_CONFIG = 261,
-    /** v14+ */
-    SET_PENDING_NETWORK_UPDATE_PAN_ID = 286,
-    /** v14+ */
-    GET_ENDPOINT = 302,
-    /** v14+ */
-    GET_ENDPOINT_COUNT = 303,
-    /** v14+ */
-    GET_ENDPOINT_DESCRIPTION = 304,
-    /** v14+ */
-    GET_ENDPOINT_CLUSTER = 305,
-    NOP = 5,
-    ECHO = 129,
-    INVALID_COMMAND = 88,
-    CALLBACK = 6,
-    NO_CALLBACKS = 7,
-    SET_TOKEN = 9,
-    GET_TOKEN = 10,
-    GET_MFG_TOKEN = 11,
-    SET_MFG_TOKEN = 12,
-    STACK_TOKEN_CHANGED_HANDLER = 13,
-    GET_RANDOM_NUMBER = 73,
-    SET_TIMER = 14,
-    GET_TIMER = 78,
-    TIMER_HANDLER = 15,
-    DEBUG_WRITE = 18,
-    READ_AND_CLEAR_COUNTERS = 101,
-    READ_COUNTERS = 241,
-    COUNTER_ROLLOVER_HANDLER = 242,
-    DELAY_TEST = 157,
-    GET_LIBRARY_STATUS = 1,
-    GET_XNCP_INFO = 19,
-    CUSTOM_FRAME = 71,
-    CUSTOM_FRAME_HANDLER = 84,
-    GET_EUI64 = 38,
-    GET_NODE_ID = 39,
-    GET_PHY_INTERFACE_COUNT = 252,
-    GET_TRUE_RANDOM_ENTROPY_SOURCE = 79,
-    /** v14+ */
-    SETUP_DELAYED_JOIN = 58,
-    /** v14+ */
-    RADIO_GET_SCHEDULER_PRIORITIES = 298,
-    /** v14+ */
-    RADIO_SET_SCHEDULER_PRIORITIES = 299,
-    /** v14+ */
-    RADIO_GET_SCHEDULER_SLIPTIME = 300,
-    /** v14+ */
-    RADIO_SET_SCHEDULER_SLIPTIME = 301,
-    /** v14+ */
-    COUNTER_REQUIRES_PHY_INDEX = 306,
-    /** v14+ */
-    COUNTER_REQUIRES_DESTINATION_NODE_ID = 307,
-    SET_MANUFACTURER_CODE = 21,
-    /** v14+ */
-    GET_MANUFACTURER_CODE = 202,
-    SET_POWER_DESCRIPTOR = 22,
-    NETWORK_INIT = 23,
-    NETWORK_STATE = 24,
-    STACK_STATUS_HANDLER = 25,
-    START_SCAN = 26,
-    ENERGY_SCAN_RESULT_HANDLER = 72,
-    NETWORK_FOUND_HANDLER = 27,
-    SCAN_COMPLETE_HANDLER = 28,
-    UNUSED_PAN_ID_FOUND_HANDLER = 210,
-    FIND_UNUSED_PAN_ID = 211,
-    STOP_SCAN = 29,
-    FORM_NETWORK = 30,
-    JOIN_NETWORK = 31,
-    JOIN_NETWORK_DIRECTLY = 59,
-    LEAVE_NETWORK = 32,
-    FIND_AND_REJOIN_NETWORK = 33,
-    PERMIT_JOINING = 34,
-    CHILD_JOIN_HANDLER = 35,
-    ENERGY_SCAN_REQUEST = 156,
-    GET_NETWORK_PARAMETERS = 40,
-    GET_RADIO_PARAMETERS = 253,
-    GET_PARENT_CHILD_PARAMETERS = 41,
-    /** v14+ */
-    ROUTER_CHILD_COUNT = 315,
-    /** v14+ */
-    MAX_CHILD_COUNT = 316,
-    /** v14+ */
-    MAX_ROUTER_CHILD_COUNT = 317,
-    /** v14+ */
-    GET_PARENT_INCOMING_NWK_FRAME_COUNTER = 318,
-    /** v14+ */
-    SET_PARENT_INCOMING_NWK_FRAME_COUNTER = 319,
-    /** v14+ */
-    CURRENT_STACK_TASKS = 325,
-    /** v14+ */
-    OK_TO_NAP = 326,
-    /** v14+ */
-    PARENT_TOKEN_SET = 320,
-    /** v14+ */
-    OK_TO_HIBERNATE = 321,
-    /** v14+ */
-    OK_TO_LONG_POLL = 322,
-    /** v14+ */
-    STACK_POWER_DOWN = 323,
-    /** v14+ */
-    STACK_POWER_UP = 324,
-    GET_CHILD_DATA = 74,
-    SET_CHILD_DATA = 172,
-    CHILD_ID = 262,
-    /** v14+ */
-    CHILD_POWER = 308,
-    /** v14+ */
-    SET_CHILD_POWER = 309,
-    CHILD_INDEX = 263,
-    GET_SOURCE_ROUTE_TABLE_TOTAL_SIZE = 195,
-    GET_SOURCE_ROUTE_TABLE_FILLED_SIZE = 194,
-    GET_SOURCE_ROUTE_TABLE_ENTRY = 193,
-    GET_NEIGHBOR = 121,
-    GET_NEIGHBOR_FRAME_COUNTER = 62,
-    SET_NEIGHBOR_FRAME_COUNTER = 173,
-    SET_ROUTING_SHORTCUT_THRESHOLD = 208,
-    GET_ROUTING_SHORTCUT_THRESHOLD = 209,
-    NEIGHBOR_COUNT = 122,
-    GET_ROUTE_TABLE_ENTRY = 123,
-    SET_RADIO_POWER = 153,
-    SET_RADIO_CHANNEL = 154,
-    GET_RADIO_CHANNEL = 255,
-    SET_RADIO_IEEE802154_CCA_MODE = 149,
-    SET_CONCENTRATOR = 16,
-    /** v14+ */
-    CONCENTRATOR_START_DISCOVERY = 335,
-    /** v14+ */
-    CONCENTRATOR_STOP_DISCOVERY = 336,
-    /** v14+ */
-    CONCENTRATOR_NOTE_ROUTE_ERROR = 337,
-    SET_BROKEN_ROUTE_ERROR_CODE = 17,
-    MULTI_PHY_START = 248,
-    MULTI_PHY_STOP = 249,
-    MULTI_PHY_SET_RADIO_POWER = 250,
-    SEND_LINK_POWER_DELTA_REQUEST = 247,
-    MULTI_PHY_SET_RADIO_CHANNEL = 251,
-    GET_DUTY_CYCLE_STATE = 53,
-    SET_DUTY_CYCLE_LIMITS_IN_STACK = 64,
-    GET_DUTY_CYCLE_LIMITS = 75,
-    GET_CURRENT_DUTY_CYCLE = 76,
-    DUTY_CYCLE_HANDLER = 77,
-    SET_NUM_BEACONS_TO_STORE = 55,
-    GET_STORED_BEACON = 4,
-    GET_NUM_STORED_BEACONS = 8,
-    CLEAR_STORED_BEACONS = 60,
-    SET_LOGICAL_AND_RADIO_CHANNEL = 185,
-    /** v14+ */
-    SLEEPY_TO_SLEEPY_NETWORK_START = 281,
-    /** v14+ */
-    SEND_ZIGBEE_LEAVE = 282,
-    /** v14+ */
-    GET_PERMIT_JOINING = 287,
-    /** v14+ */
-    GET_EXTENDED_PAN_ID = 295,
-    /** v14+ */
-    GET_CURRENT_NETWORK = 334,
-    /** v14+ */
-    SET_INITIAL_NEIGHBOR_OUTGOING_COST = 290,
-    /** v14+ */
-    GET_INITIAL_NEIGHBOR_OUTGOING_COST = 291,
-    /** v14+ */
-    RESET_REJOINING_NEIGHBORS_FRAME_COUNTER = 292,
-    /** v14+ */
-    IS_RESET_REJOINING_NEIGHBORS_FRAME_COUNTER_ENABLED = 293,
-    CLEAR_BINDING_TABLE = 42,
-    SET_BINDING = 43,
-    GET_BINDING = 44,
-    DELETE_BINDING = 45,
-    BINDING_IS_ACTIVE = 46,
-    GET_BINDING_REMOTE_NODE_ID = 47,
-    SET_BINDING_REMOTE_NODE_ID = 48,
-    REMOTE_SET_BINDING_HANDLER = 49,
-    REMOTE_DELETE_BINDING_HANDLER = 50,
-    MAXIMUM_PAYLOAD_LENGTH = 51,
-    SEND_UNICAST = 52,
-    SEND_BROADCAST = 54,
-    PROXY_NEXT_BROADCAST_FROM_LONG = 102,
-    SEND_MULTICAST = 56,
-    SEND_REPLY = 57,
-    MESSAGE_SENT_HANDLER = 63,
-    SEND_MANY_TO_ONE_ROUTE_REQUEST = 65,
-    POLL_FOR_DATA = 66,
-    POLL_COMPLETE_HANDLER = 67,
-    /** v14+ */
-    SET_MESSAGE_FLAG = 310,
-    /** v14+ */
-    CLEAR_MESSAGE_FLAG = 311,
-    POLL_HANDLER = 68,
-    /** v14+ */
-    ADD_CHILD = 312,
-    /** v14+ */
-    REMOVE_CHILD = 313,
-    /** v14+ */
-    REMOVE_NEIGHBOR = 314,
-    INCOMING_MESSAGE_HANDLER = 69,
-    SET_SOURCE_ROUTE_DISCOVERY_MODE = 90,
-    INCOMING_MANY_TO_ONE_ROUTE_REQUEST_HANDLER = 125,
-    INCOMING_ROUTE_ERROR_HANDLER = 128,
-    INCOMING_NETWORK_STATUS_HANDLER = 196,
-    INCOMING_ROUTE_RECORD_HANDLER = 89,
-    UNICAST_CURRENT_NETWORK_KEY = 80,
-    ADDRESS_TABLE_ENTRY_IS_ACTIVE = 91,
-    /** v14+ */
-    SET_ADDRESS_TABLE_INFO = 92,
-    /** v14+ */
-    GET_ADDRESS_TABLE_INFO = 94,
-    SET_EXTENDED_TIMEOUT = 126,
-    GET_EXTENDED_TIMEOUT = 127,
-    REPLACE_ADDRESS_TABLE_ENTRY = 130,
-    LOOKUP_NODE_ID_BY_EUI64 = 96,
-    LOOKUP_EUI64_BY_NODE_ID = 97,
-    GET_MULTICAST_TABLE_ENTRY = 99,
-    SET_MULTICAST_TABLE_ENTRY = 100,
-    ID_CONFLICT_HANDLER = 124,
-    WRITE_NODE_DATA = 254,
-    SEND_RAW_MESSAGE = 81,
-    MAC_PASSTHROUGH_MESSAGE_HANDLER = 151,
-    MAC_FILTER_MATCH_MESSAGE_HANDLER = 70,
-    RAW_TRANSMIT_COMPLETE_HANDLER = 152,
-    SET_MAC_POLL_FAILURE_WAIT_TIME = 244,
-    /** v14+ */
-    GET_MAX_MAC_RETRIES = 106,
-    SET_BEACON_CLASSIFICATION_PARAMS = 239,
-    GET_BEACON_CLASSIFICATION_PARAMS = 243,
-    /** v14+ */
-    PENDING_ACKED_MESSAGES = 289,
-    /** v14+ */
-    RESCHEDULE_LINK_STATUS_MSG = 283,
-    /** v14+ */
-    SET_NWK_UPDATE_ID = 285,
-    SET_INITIAL_SECURITY_STATE = 104,
-    GET_CURRENT_SECURITY_STATE = 105,
-    EXPORT_KEY = 276,
-    IMPORT_KEY = 277,
-    SWITCH_NETWORK_KEY_HANDLER = 110,
-    FIND_KEY_TABLE_ENTRY = 117,
-    SEND_TRUST_CENTER_LINK_KEY = 103,
-    ERASE_KEY_TABLE_ENTRY = 118,
-    CLEAR_KEY_TABLE = 177,
-    REQUEST_LINK_KEY = 20,
-    UPDATE_TC_LINK_KEY = 108,
-    ZIGBEE_KEY_ESTABLISHMENT_HANDLER = 155,
-    CLEAR_TRANSIENT_LINK_KEYS = 107,
-    GET_NETWORK_KEY_INFO = 278,
-    GET_APS_KEY_INFO = 268,
-    IMPORT_LINK_KEY = 270,
-    EXPORT_LINK_KEY_BY_INDEX = 271,
-    EXPORT_LINK_KEY_BY_EUI = 269,
-    CHECK_KEY_CONTEXT = 272,
-    IMPORT_TRANSIENT_KEY = 273,
-    EXPORT_TRANSIENT_KEY_BY_INDEX = 274,
-    EXPORT_TRANSIENT_KEY_BY_EUI = 275,
-    /** v14+ */
-    SET_INCOMING_TC_LINK_KEY_FRAME_COUNTER = 296,
-    /** v14+ */
-    APS_CRYPT_MESSAGE = 297,
-    TRUST_CENTER_JOIN_HANDLER = 36,
-    BROADCAST_NEXT_NETWORK_KEY = 115,
-    BROADCAST_NETWORK_KEY_SWITCH = 116,
-    AES_MMO_HASH = 111,
-    REMOVE_DEVICE = 168,
-    UNICAST_NWK_KEY_UPDATE = 169,
-    GENERATE_CBKE_KEYS = 164,
-    GENERATE_CBKE_KEYS_HANDLER = 158,
-    CALCULATE_SMACS = 159,
-    CALCULATE_SMACS_HANDLER = 160,
-    GENERATE_CBKE_KEYS283K1 = 232,
-    GENERATE_CBKE_KEYS_HANDLER283K1 = 233,
-    CALCULATE_SMACS283K1 = 234,
-    CALCULATE_SMACS_HANDLER283K1 = 235,
-    CLEAR_TEMPORARY_DATA_MAYBE_STORE_LINK_KEY = 161,
-    CLEAR_TEMPORARY_DATA_MAYBE_STORE_LINK_KEY283K1 = 238,
-    GET_CERTIFICATE = 165,
-    GET_CERTIFICATE283K1 = 236,
-    DSA_SIGN_HANDLER = 167,
-    DSA_VERIFY = 163,
-    DSA_VERIFY_HANDLER = 120,
-    DSA_VERIFY283K1 = 176,
-    SET_PREINSTALLED_CBKE_DATA = 162,
-    SAVE_PREINSTALLED_CBKE_DATA283K1 = 237,
-    MFGLIB_INTERNAL_START = 131,
-    MFGLIB_INTERNAL_END = 132,
-    MFGLIB_INTERNAL_START_TONE = 133,
-    MFGLIB_INTERNAL_STOP_TONE = 134,
-    MFGLIB_INTERNAL_START_STREAM = 135,
-    MFGLIB_INTERNAL_STOP_STREAM = 136,
-    MFGLIB_INTERNAL_SEND_PACKET = 137,
-    MFGLIB_INTERNAL_SET_CHANNEL = 138,
-    MFGLIB_INTERNAL_GET_CHANNEL = 139,
-    MFGLIB_INTERNAL_SET_POWER = 140,
-    MFGLIB_INTERNAL_GET_POWER = 141,
-    MFGLIB_RX_HANDLER = 142,
-    LAUNCH_STANDALONE_BOOTLOADER = 143,
-    SEND_BOOTLOAD_MESSAGE = 144,
-    GET_STANDALONE_BOOTLOADER_VERSION_PLAT_MICRO_PHY = 145,
-    INCOMING_BOOTLOAD_MESSAGE_HANDLER = 146,
-    BOOTLOAD_TRANSMIT_COMPLETE_HANDLER = 147,
-    AES_ENCRYPT = 148,
-    /** v14+ */
-    INCOMING_MFG_TEST_MESSAGE_HANDLER = 327,
-    /** v14+ */
-    MFG_TEST_SET_PACKET_MODE = 328,
-    /** v14+ */
-    MFG_TEST_SEND_REBOOT_COMMAND = 329,
-    /** v14+ */
-    MFG_TEST_SEND_EUI64 = 330,
-    /** v14+ */
-    MFG_TEST_SEND_MANUFACTURING_STRING = 331,
-    /** v14+ */
-    MFG_TEST_SEND_RADIO_PARAMETERS = 332,
-    /** v14+ */
-    MFG_TEST_SEND_COMMAND = 333,
-    ZLL_NETWORK_OPS = 178,
-    ZLL_SET_INITIAL_SECURITY_STATE = 179,
-    ZLL_SET_SECURITY_STATE_WITHOUT_KEY = 207,
-    ZLL_START_SCAN = 180,
-    ZLL_SET_RX_ON_WHEN_IDLE = 181,
-    ZLL_NETWORK_FOUND_HANDLER = 182,
-    ZLL_SCAN_COMPLETE_HANDLER = 183,
-    ZLL_ADDRESS_ASSIGNMENT_HANDLER = 184,
-    ZLL_TOUCH_LINK_TARGET_HANDLER = 187,
-    ZLL_GET_TOKENS = 188,
-    ZLL_SET_DATA_TOKEN = 189,
-    ZLL_SET_NON_ZLL_NETWORK = 191,
-    IS_ZLL_NETWORK = 190,
-    ZLL_SET_RADIO_IDLE_MODE = 212,
-    ZLL_GET_RADIO_IDLE_MODE = 186,
-    SET_ZLL_NODE_TYPE = 213,
-    SET_ZLL_ADDITIONAL_STATE = 214,
-    ZLL_OPERATION_IN_PROGRESS = 215,
-    ZLL_RX_ON_WHEN_IDLE_GET_ACTIVE = 216,
-    ZLL_SCANNING_COMPLETE = 246,
-    GET_ZLL_PRIMARY_CHANNEL_MASK = 217,
-    GET_ZLL_SECONDARY_CHANNEL_MASK = 218,
-    SET_ZLL_PRIMARY_CHANNEL_MASK = 219,
-    SET_ZLL_SECONDARY_CHANNEL_MASK = 220,
-    ZLL_CLEAR_TOKENS = 37,
-    GP_PROXY_TABLE_PROCESS_GP_PAIRING = 201,
-    D_GP_SEND = 198,
-    D_GP_SENT_HANDLER = 199,
-    GPEP_INCOMING_MESSAGE_HANDLER = 197,
-    GP_PROXY_TABLE_GET_ENTRY = 200,
-    GP_PROXY_TABLE_LOOKUP = 192,
-    GP_SINK_TABLE_GET_ENTRY = 221,
-    GP_SINK_TABLE_LOOKUP = 222,
-    GP_SINK_TABLE_SET_ENTRY = 223,
-    GP_SINK_TABLE_REMOVE_ENTRY = 224,
-    GP_SINK_TABLE_FIND_OR_ALLOCATE_ENTRY = 225,
-    GP_SINK_TABLE_CLEAR_ALL = 226,
-    GP_SINK_TABLE_INIT = 112,
-    GP_SINK_TABLE_SET_SECURITY_FRAME_COUNTER = 245,
-    GP_SINK_COMMISSION = 266,
-    GP_TRANSLATION_TABLE_CLEAR = 267,
-    GP_SINK_TABLE_GET_NUMBER_OF_ACTIVE_ENTRIES = 280,
-    GET_TOKEN_COUNT = 256,
-    GET_TOKEN_INFO = 257,
-    GET_TOKEN_DATA = 258,
-    SET_TOKEN_DATA = 259,
-    RESET_NODE = 260,
-    GP_SECURITY_TEST_VECTORS = 279,
-    TOKEN_FACTORY_RESET = 119
-}
-/** Identifies a configuration value. uint8_t */
-export declare enum EzspConfigId {
-    /**
-     * The NCP no longer supports configuration of packet buffer heap at runtime using this parameter.
-     * Packet buffers heap space must be configured using the EMBER_PACKET_BUFFER_COUNT macro when building the NCP project.
-     */
-    PACKET_BUFFER_HEAP_SIZE = 1,
-    /**
-     * The maximum number of router neighbors the stack can keep track of. A
-     * neighbor is a node within radio range.
-     */
-    NEIGHBOR_TABLE_SIZE = 2,
-    /**
-     * The maximum number of APS retried messages the stack can be transmitting at
-     * any time.
-     */
-    APS_UNICAST_MESSAGE_COUNT = 3,
-    /**
-     * The maximum number of non-volatile bindings supported by the stack.
-     */
-    BINDING_TABLE_SIZE = 4,
-    /**
-     * The maximum number of EUI64 to network address associations that the stack
-     * can maintain for the application. (Note, the total number of such address
-     * associations maintained by the NCP is the sum of the value of this setting
-     * and the value of ::TRUST_CENTER_ADDRESS_CACHE_SIZE.
-     */
-    ADDRESS_TABLE_SIZE = 5,
-    /**
-     * The maximum number of multicast groups that the device may be a member of.
-     */
-    MULTICAST_TABLE_SIZE = 6,
-    /**
-     * The maximum number of destinations to which a node can route messages. This
-     * includes both messages originating at this node and those relayed for
-     * others.
-     */
-    ROUTE_TABLE_SIZE = 7,
-    /**
-     * The number of simultaneous route discoveries that a node will support.
-     */
-    DISCOVERY_TABLE_SIZE = 8,
-    /**
-     * Specifies the stack profile.
-     */
-    STACK_PROFILE = 12,
-    /**
-     * The security level used for security at the MAC and network layers. The
-     * supported values are 0 (no security) and 5 (payload is encrypted and a
-     * four-byte MIC is used for authentication).
-     */
-    SECURITY_LEVEL = 13,
-    /**
-     * The maximum number of hops for a message.
-     */
-    MAX_HOPS = 16,
-    /**
-     * The maximum number of end device children that a router will support.
-     */
-    MAX_END_DEVICE_CHILDREN = 17,
-    /**
-     * The maximum amount of time that the MAC will hold a message for indirect
-     * transmission to a child.
-     */
-    INDIRECT_TRANSMISSION_TIMEOUT = 18,
-    /**
-     * The maximum amount of time that an end device child can wait between polls.
-     * If no poll is heard within this timeout, then the parent removes the end
-     * device from its tables. Value range 0-14. The timeout corresponding to a
-     * value of zero is 10 seconds. The timeout corresponding to a nonzero value N
-     * is 2^N minutes, ranging from 2^1 = 2 minutes to 2^14 = 16384 minutes.
-     */
-    END_DEVICE_POLL_TIMEOUT = 19,
-    /**
-     * Enables boost power mode and/or the alternate transmitter output.
-     */
-    TX_POWER_MODE = 23,
-    /**
-     * 0: Allow this node to relay messages. 1: Prevent this node from relaying
-     * messages.
-     */
-    DISABLE_RELAY = 24,
-    /**
-     * The maximum number of EUI64 to network address associations that the Trust
-     * Center can maintain. These address cache entries are reserved for and
-     * reused by the Trust Center when processing device join/rejoin
-     * authentications. This cache size limits the number of overlapping joins the
-     * Trust Center can process within a narrow time window (e.g. two seconds),
-     * and thus should be set to the maximum number of near simultaneous joins the
-     * Trust Center is expected to accommodate. (Note, the total number of such
-     * address associations maintained by the NCP is the sum of the value of this
-     * setting and the value of ::ADDRESS_TABLE_SIZE.)
-     */
-    TRUST_CENTER_ADDRESS_CACHE_SIZE = 25,
-    /**
-     * The size of the source route table.
-     */
-    SOURCE_ROUTE_TABLE_SIZE = 26,
-    /** The number of blocks of a fragmented message that can be sent in a single window. */
-    FRAGMENT_WINDOW_SIZE = 28,
-    /** The time the stack will wait (in milliseconds) between sending blocks of a fragmented message. */
-    FRAGMENT_DELAY_MS = 29,
-    /**
-     * The size of the Key Table used for storing individual link keys (if the
-     * device is a Trust Center) or Application Link Keys (if the device is a normal node).
-     */
-    KEY_TABLE_SIZE = 30,
-    /** The APS ACK timeout value. The stack waits this amount of time between resends of APS retried messages. */
-    APS_ACK_TIMEOUT = 31,
-    /**
-     * The duration of a beacon jitter, in the units used by the 15.4 scan
-     * parameter (((1 << duration) + 1) * 15ms), when responding to a beacon request.
-     */
-    BEACON_JITTER_DURATION = 32,
-    /** The number of PAN id conflict reports that must be received by the network manager within one minute to trigger a PAN id change. */
-    PAN_ID_CONFLICT_REPORT_THRESHOLD = 34,
-    /**
-     * The timeout value in minutes for how long the Trust Center or a normal node
-     * waits for the ZigBee Request Key to complete. On the Trust Center this
-     * controls whether or not the device buffers the request, waiting for a
-     * matching pair of ZigBee Request Key. If the value is non-zero, the Trust
-     * Center buffers and waits for that amount of time. If the value is zero, the
-     * Trust Center does not buffer the request and immediately responds to the
-     * request. Zero is the most compliant behavior.
-     */
-    REQUEST_KEY_TIMEOUT = 36,
-    /**
-     * This value indicates the size of the runtime modifiable certificate table.
-     * Normally certificates are stored in MFG tokens but this table can be used
-     * to field upgrade devices with new Smart Energy certificates. This value
-     * cannot be set, it can only be queried.
-     */
-    CERTIFICATE_TABLE_SIZE = 41,
-    /**
-     * This is a bitmask that controls which incoming ZDO request messages are
-     * passed to the application. The bits are defined in the
-     * EmberZdoConfigurationFlags enumeration. To see if the application is
-     * required to send a ZDO response in reply to an incoming message, the
-     * application must check the APS options bitfield within the
-     * incomingMessageHandler callback to see if the
-     * EMBER_APS_OPTION_ZDO_RESPONSE_REQUIRED flag is set.
-     */
-    APPLICATION_ZDO_FLAGS = 42,
-    /** The maximum number of broadcasts during a single broadcast timeout period. */
-    BROADCAST_TABLE_SIZE = 43,
-    /** The size of the MAC filter list table. */
-    MAC_FILTER_TABLE_SIZE = 44,
-    /** The number of supported networks. */
-    SUPPORTED_NETWORKS = 45,
-    /**
-     * Whether multicasts are sent to the RxOnWhenIdle=true address (0xFFFD) or
-     * the sleepy broadcast address (0xFFFF). The RxOnWhenIdle=true address is the
-     * ZigBee compliant destination for multicasts.
-     */
-    SEND_MULTICASTS_TO_SLEEPY_ADDRESS = 46,
-    /** ZLL group address initial configuration. */
-    ZLL_GROUP_ADDRESSES = 47,
-    /** ZLL rssi threshold initial configuration. */
-    ZLL_RSSI_THRESHOLD = 48,
-    /** Toggles the MTORR flow control in the stack. */
-    MTORR_FLOW_CONTROL = 51,
-    /** Setting the retry queue size. Applies to all queues. Default value in the sample applications is 16. */
-    RETRY_QUEUE_SIZE = 52,
-    /**
-     * Setting the new broadcast entry threshold. The number (BROADCAST_TABLE_SIZE
-     * - NEW_BROADCAST_ENTRY_THRESHOLD) of broadcast table entries are reserved
-     * for relaying the broadcast messages originated on other devices. The local
-     * device will fail to originate a broadcast message after this threshold is
-     * reached. Setting this value to BROADCAST_TABLE_SIZE and greater will
-     * effectively kill this limitation.
-     */
-    NEW_BROADCAST_ENTRY_THRESHOLD = 53,
-    /**
-     * The length of time, in seconds, that a trust center will store a transient
-     * link key that a device can use to join its network. A transient key is
-     * added with a call to emberAddTransientLinkKey. After the transient key is
-     * added, it will be removed once this amount of time has passed. A joining
-     * device will not be able to use that key to join until it is added again on
-     * the trust center. The default value is 300 seconds, i.e., 5 minutes.
-     */
-    TRANSIENT_KEY_TIMEOUT_S = 54,
-    /** The number of passive acknowledgements to record from neighbors before we stop re-transmitting broadcasts */
-    BROADCAST_MIN_ACKS_NEEDED = 55,
-    /**
-     * The length of time, in seconds, that a trust center will allow a Trust
-     * Center (insecure) rejoin for a device that is using the well-known link
-     * key. This timeout takes effect once rejoins using the well-known key has
-     * been allowed. This command updates the
-     * sli_zigbee_allow_tc_rejoins_using_well_known_key_timeout_sec value.
-     */
-    TC_REJOINS_USING_WELL_KNOWN_KEY_TIMEOUT_S = 56,
-    /** Valid range of a CTUNE value is 0x0000-0x01FF. Higher order bits (0xFE00) of the 16-bit value are ignored. */
-    CTUNE_VALUE = 57,
-    /**
-     * To configure non trust center node to assume a concentrator type of the
-     * trust center it join to, until it receive many-to-one route request from
-     * the trust center. For the trust center node, concentrator type is
-     * configured from the concentrator plugin. The stack by default assumes trust
-     * center be a low RAM concentrator that make other devices send route record
-     * to the trust center even without receiving a many-to-one route request. The
-     * default concentrator type can be changed by setting appropriate
-     * EmberAssumeTrustCenterConcentratorType config value.
-     */
-    ASSUME_TC_CONCENTRATOR_TYPE = 64,
-    /** This is green power proxy table size. This value is read-only and cannot be set at runtime */
-    GP_PROXY_TABLE_SIZE = 65,
-    /** This is green power sink table size. This value is read-only and cannot be set at runtime */
-    GP_SINK_TABLE_SIZE = 66,
-    /**
-     * v14+
-     * This is the configuration advertised by the end device to the parent when joining/rejoining,
-     * either SL_ZIGBEE_END_DEVICE_CONFIG_NONE or SL_ZIGBEE_END_DEVICE_CONFIG_PERSIST_DATA_ON_PARENT.
-     */
-    END_DEVICE_CONFIGURATION = 67
-}
-/** Identifies a policy decision. */
-export declare enum EzspDecisionId {
-    /**
-     * BINDING_MODIFICATION_POLICY default decision.
-     *
-     * Do not allow the local binding table to be changed by remote nodes.
-     */
-    DISALLOW_BINDING_MODIFICATION = 16,
-    /**
-     * BINDING_MODIFICATION_POLICY decision.
-     *
-     * Allow remote nodes to change the local binding table.
-     */
-    ALLOW_BINDING_MODIFICATION = 17,
-    /**
-     * BINDING_MODIFICATION_POLICY decision.
-     *
-     * Allows remote nodes to set local binding entries only if the entries correspond to endpoints
-     * defined on the device, and for output clusters bound to those endpoints.
-     */
-    CHECK_BINDING_MODIFICATIONS_ARE_VALID_ENDPOINT_CLUSTERS = 18,
-    /**
-     * UNICAST_REPLIES_POLICY default decision.
-     *
-     * The NCP will automatically send an empty reply (containing no payload) for every unicast received.
-     * */
-    HOST_WILL_NOT_SUPPLY_REPLY = 32,
-    /**
-     * UNICAST_REPLIES_POLICY decision.
-     *
-     * The NCP will only send a reply if it receives a sendReply command from the Host.
-     */
-    HOST_WILL_SUPPLY_REPLY = 33,
-    /**
-     * POLL_HANDLER_POLICY default decision.
-     *
-     * Do not inform the Host when a child polls.
-     */
-    POLL_HANDLER_IGNORE = 48,
-    /**
-     * POLL_HANDLER_POLICY decision.
-     *
-     * Generate a pollHandler callback when a child polls.
-     */
-    POLL_HANDLER_CALLBACK = 49,
-    /**
-     * MESSAGE_CONTENTS_IN_CALLBACK_POLICY default decision.
-     *
-     * Include only the message tag in the messageSentHandler callback.
-     */
-    MESSAGE_TAG_ONLY_IN_CALLBACK = 64,
-    /**
-     * MESSAGE_CONTENTS_IN_CALLBACK_POLICY decision.
-     *
-     * Include both the message tag and the message contents in the messageSentHandler callback.
-     */
-    MESSAGE_TAG_AND_CONTENTS_IN_CALLBACK = 65,
-    /**
-     * TC_KEY_REQUEST_POLICY decision.
-     *
-     * When the Trust Center receives a request for a Trust Center link key, it will be ignored.
-     */
-    DENY_TC_KEY_REQUESTS = 80,
-    /**
-     * TC_KEY_REQUEST_POLICY decision.
-     *
-     * When the Trust Center receives a request for a Trust Center link key, it will reply to it with the corresponding key.
-     */
-    ALLOW_TC_KEY_REQUESTS_AND_SEND_CURRENT_KEY = 81,
-    /**
-     * TC_KEY_REQUEST_POLICY decision.
-     *
-     * When the Trust Center receives a request for a Trust Center link key, it will generate a key to send to the joiner.
-     * After generation, the key will be added to the transient key tabe and After verification, this key will be added into the link key table.
-     */
-    ALLOW_TC_KEY_REQUEST_AND_GENERATE_NEW_KEY = 82,
-    /**
-     * APP_KEY_REQUEST_POLICY decision.
-     * When the Trust Center receives a request for an application link key, it will be ignored.
-     * */
-    DENY_APP_KEY_REQUESTS = 96,
-    /**
-     * APP_KEY_REQUEST_POLICY decision.
-     *
-     * When the Trust Center receives a request for an application link key, it will randomly generate a key and send it to both partners.
-     */
-    ALLOW_APP_KEY_REQUESTS = 97,
-    /** Indicates that packet validate library checks are enabled on the NCP. */
-    PACKET_VALIDATE_LIBRARY_CHECKS_ENABLED = 98,
-    /** Indicates that packet validate library checks are NOT enabled on the NCP. */
-    PACKET_VALIDATE_LIBRARY_CHECKS_DISABLED = 99
-}
-/**
- * This is the policy decision bitmask that controls the trust center decision strategies.
- * The bitmask is modified and extracted from the EzspDecisionId for supporting bitmask operations.
- * uint16_t
- */
-export declare enum EzspDecisionBitmask {
-    /** Disallow joins and rejoins. */
-    DEFAULT_CONFIGURATION = 0,
-    /** Send the network key to all joining devices. */
-    ALLOW_JOINS = 1,
-    /** Send the network key to all rejoining devices. */
-    ALLOW_UNSECURED_REJOINS = 2,
-    /** Send the network key in the clear. */
-    SEND_KEY_IN_CLEAR = 4,
-    /** Do nothing for unsecured rejoins. */
-    IGNORE_UNSECURED_REJOINS = 8,
-    /** Allow joins if there is an entry in the transient key table. */
-    JOINS_USE_INSTALL_CODE_KEY = 16,
-    /** Delay sending the network key to a new joining device. */
-    DEFER_JOINS = 32
-}
-/** Identifies a policy. */
-export declare enum EzspPolicyId {
-    /** Controls trust center behavior. */
-    TRUST_CENTER_POLICY = 0,
-    /** Controls how external binding modification requests are handled. */
-    BINDING_MODIFICATION_POLICY = 1,
-    /** Controls whether the Host supplies unicast replies. */
-    UNICAST_REPLIES_POLICY = 2,
-    /** Controls whether pollHandler callbacks are generated. */
-    POLL_HANDLER_POLICY = 3,
-    /** Controls whether the message contents are included in the messageSentHandler callback. */
-    MESSAGE_CONTENTS_IN_CALLBACK_POLICY = 4,
-    /** Controls whether the Trust Center will respond to Trust Center link key requests. */
-    TC_KEY_REQUEST_POLICY = 5,
-    /** Controls whether the Trust Center will respond to application link key requests. */
-    APP_KEY_REQUEST_POLICY = 6,
-    /**
-     * Controls whether ZigBee packets that appear invalid are automatically dropped by the stack.
-     * A counter will be incremented when this occurs.
-     */
-    PACKET_VALIDATE_LIBRARY_POLICY = 7,
-    /** Controls whether the stack will process ZLL messages. */
-    ZLL_POLICY = 8,
-    /**
-     * Controls whether Trust Center (insecure) rejoins for devices using the well-known link key are accepted.
-     * If rejoining using the well-known key is allowed,
-     * it is disabled again after sli_zigbee_allow_tc_rejoins_using_well_known_key_timeout_sec seconds.
-     */
-    TC_REJOINS_USING_WELL_KNOWN_KEY_POLICY = 9
-}
-/** Identifies a value. */
-export declare enum EzspValueId {
-    /** The contents of the node data stack token. */
-    TOKEN_STACK_NODE_DATA = 0,
-    /** The types of MAC passthrough messages that the host wishes to receive. */
-    MAC_PASSTHROUGH_FLAGS = 1,
-    /**
-     * The source address used to filter legacy EmberNet messages when the
-     * EMBER_MAC_PASSTHROUGH_EMBERNET_SOURCE flag is set in MAC_PASSTHROUGH_FLAGS.
-     */
-    EMBERNET_PASSTHROUGH_SOURCE_ADDRESS = 2,
-    /** The amount in bytes (max 2^16) of available general purpose heap memory. */
-    BUFFER_HEAP_FREE_SIZE = 3,
-    /** Selects sending synchronous callbacks in ezsp-uart. */
-    UART_SYNCH_CALLBACKS = 4,
-    /**
-     * The maximum incoming transfer size for the local node.
-     * Default value is set to 82 and does not use fragmentation. Sets the value in Node Descriptor.
-     * To set, this takes the input of a uint8 array of length 2 where you pass the lower byte at index 0 and upper byte at index 1.
-     */
-    MAXIMUM_INCOMING_TRANSFER_SIZE = 5,
-    /**
-     * The maximum outgoing transfer size for the local node.
-     * Default value is set to 82 and does not use fragmentation. Sets the value in Node Descriptor.
-     * To set, this takes the input of a uint8 array of length 2 where you pass the lower byte at index 0 and upper byte at index 1.
-     */
-    MAXIMUM_OUTGOING_TRANSFER_SIZE = 6,
-    /** A bool indicating whether stack tokens are written to persistent storage as they change. */
-    STACK_TOKEN_WRITING = 7,
-    /** A read-only value indicating whether the stack is currently performing a rejoin. */
-    STACK_IS_PERFORMING_REJOIN = 8,
-    /** A list of EmberMacFilterMatchData values. */
-    MAC_FILTER_LIST = 9,
-    /** The Ember Extended Security Bitmask. */
-    EXTENDED_SECURITY_BITMASK = 10,
-    /** The node short ID. */
-    NODE_SHORT_ID = 11,
-    /** The descriptor capability of the local node. Write only. */
-    DESCRIPTOR_CAPABILITY = 12,
-    /** The stack device request sequence number of the local node. */
-    STACK_DEVICE_REQUEST_SEQUENCE_NUMBER = 13,
-    /** Enable or disable radio hold-off. */
-    RADIO_HOLD_OFF = 14,
-    /** The flags field associated with the endpoint data. */
-    ENDPOINT_FLAGS = 15,
-    /** Enable/disable the Mfg security config key settings. */
-    MFG_SECURITY_CONFIG = 16,
-    /** Retrieves the version information from the stack on the NCP. */
-    VERSION_INFO = 17,
-    /**
-     * This is the reason that the last rejoin took place. This value may only be retrieved, not set.
-     * The rejoin may have been initiated by the stack (NCP) or the application (host).
-     * If a host initiated a rejoin the reason will be set by default to EMBER_REJOIN_DUE_TO_APP_EVENT_1.
-     * If the application wishes to denote its own rejoin reasons it can do so by calling
-     * ezspSetValue(EMBER_VALUE_HOST_REJOIN_REASON, EMBER_REJOIN_DUE_TO_APP_EVENT_X).
-     * X is a number corresponding to one of the app events defined.
-     * If the NCP initiated a rejoin it will record this value internally for retrieval by ezspGetValue(REAL_REJOIN_REASON).
-     */
-    LAST_REJOIN_REASON = 19,
-    /** The next ZigBee sequence number. */
-    NEXT_ZIGBEE_SEQUENCE_NUMBER = 20,
-    /** CCA energy detect threshold for radio. */
-    CCA_THRESHOLD = 21,
-    /** The threshold value for a counter */
-    SET_COUNTER_THRESHOLD = 23,
-    /** Resets all counters thresholds to 0xFF */
-    RESET_COUNTER_THRESHOLDS = 24,
-    /** Clears all the counters */
-    CLEAR_COUNTERS = 25,
-    /** The node's new certificate signed by the CA. */
-    CERTIFICATE_283K1 = 26,
-    /** The Certificate Authority's public key. */
-    PUBLIC_KEY_283K1 = 27,
-    /** The node's new static private key. */
-    PRIVATE_KEY_283K1 = 28,
-    /** The NWK layer security frame counter value */
-    NWK_FRAME_COUNTER = 35,
-    /** The APS layer security frame counter value. Managed by the stack. Users should not set these unless doing backup and restore. */
-    APS_FRAME_COUNTER = 36,
-    /** Sets the device type to use on the next rejoin using device type */
-    RETRY_DEVICE_TYPE = 37,
-    /** Setting this byte enables R21 behavior on the NCP. */
-    ENABLE_R21_BEHAVIOR = 41,
-    /** Configure the antenna mode(0-don't switch,1-primary,2-secondary,3-TX antenna diversity). */
-    ANTENNA_MODE = 48,
-    /** Enable or disable packet traffic arbitration. */
-    ENABLE_PTA = 49,
-    /** Set packet traffic arbitration configuration options. */
-    PTA_OPTIONS = 50,
-    /** Configure manufacturing library options (0-non-CSMA transmits,1-CSMA transmits). To be used with Manufacturing Library. */
-    MFGLIB_OPTIONS = 51,
-    /**
-     * Sets the flag to use either negotiated power by link power delta (LPD) or fixed power value provided by user
-     * while forming/joining a network for packet transmissions on sub-ghz interface. This is mainly for testing purposes.
-     */
-    USE_NEGOTIATED_POWER_BY_LPD = 52,
-    /** Set packet traffic arbitration PWM options. */
-    PTA_PWM_OPTIONS = 53,
-    /** Set packet traffic arbitration directional priority pulse width in microseconds. */
-    PTA_DIRECTIONAL_PRIORITY_PULSE_WIDTH = 54,
-    /** Set packet traffic arbitration phy select timeout(ms). */
-    PTA_PHY_SELECT_TIMEOUT = 55,
-    /** Configure the RX antenna mode: (0-do not switch; 1-primary; 2-secondary; 3-RX antenna diversity). */
-    ANTENNA_RX_MODE = 56,
-    /** Configure the timeout to wait for the network key before failing a join. Acceptable timeout range [3,255]. Value is in seconds. */
-    NWK_KEY_TIMEOUT = 57,
-    /**
-     * The number of failed CSMA attempts due to failed CCA made by the MAC before continuing transmission with CCA disabled.
-     * This is the same as calling the emberForceTxAfterFailedCca(uint8_t csmaAttempts) API. A value of 0 disables the feature.
-     */
-    FORCE_TX_AFTER_FAILED_CCA_ATTEMPTS = 58,
-    /**
-     * The length of time, in seconds, that a trust center will store a transient link key that a device can use to join its network.
-     * A transient key is added with a call to sl_zb_sec_man_import_transient_key. After the transient key is added,
-     * it will be removed once this amount of time has passed. A joining device will not be able to use that key to join
-     * until it is added again on the trust center.
-     * The default value is 300 seconds (5 minutes).
-     */
-    TRANSIENT_KEY_TIMEOUT_S = 59,
-    /** Cumulative energy usage metric since the last value reset of the coulomb counter plugin. Setting this value will reset the coulomb counter. */
-    COULOMB_COUNTER_USAGE = 60,
-    /**
-     * When scanning, configure the maximum number of beacons to store in cache.
-     * Each beacon consumes on average 32-bytes (+ buffer overhead) in RAM.
-     */
-    MAX_BEACONS_TO_STORE = 61,
-    /** Set the mask to filter out unacceptable child timeout options on a router. */
-    END_DEVICE_TIMEOUT_OPTIONS_MASK = 62,
-    /** The end device keep-alive mode supported by the parent. */
-    END_DEVICE_KEEP_ALIVE_SUPPORT_MODE = 63,
-    /**
-     * Return the active radio config. Read only.
-     * Values are 0: Default, 1: Antenna Diversity, 2: Co-Existence, 3: Antenna Diversity and Co-Existence.
-     */
-    ACTIVE_RADIO_CONFIG = 65,
-    /** Return the number of seconds the network will remain open. A return value of 0 indicates that the network is closed. Read only. */
-    NWK_OPEN_DURATION = 66,
-    /**
-     * Timeout in milliseconds to store entries in the transient device table.
-     * If the devices are not authenticated before the timeout, the entry shall be purged
-     */
-    TRANSIENT_DEVICE_TIMEOUT = 67,
-    /**
-     * Return information about the key storage on an NCP.
-     * Returns 0 if keys are in classic key storage, and 1 if they are located in PSA key storage. Read only.
-     */
-    KEY_STORAGE_VERSION = 68,
-    /** Return activation state about TC Delayed Join on an NCP.  A return value of 0 indicates that the feature is not activated. */
-    DELAYED_JOIN_ACTIVATION = 69,
-    /**
-     * v14+
-     * The maximum number of NWK retries that will be attempted.
-     */
-    MAX_NWK_RETRIES = 70,
-    /**
-     * v14+
-     * Policies for allowing/disallowing rejoins.
-     */
-    REJOIN_MODE = 71
-}
-/**
- * Identifies a value based on specified characteristics.
- * Each set of characteristics is unique to that value and is specified during the call to get the extended value.
- *
- * uint16_t
- */
-export declare enum EzspExtendedValueId {
-    /** The flags field associated with the specified endpoint. Value is uint16_t */
-    ENDPOINT_FLAGS = 0,
-    /**
-     * This is the reason for the node to leave the network as well as the device that told it to leave.
-     * The leave reason is the 1st byte of the value while the node ID is the 2nd and 3rd byte.
-     * If the leave was caused due to an API call rather than an over the air message, the node ID will be EMBER_UNKNOWN_NODE_ID (0xFFFD).
-     */
-    LAST_LEAVE_REASON = 1,
-    /** This number of bytes of overhead required in the network frame for source routing to a particular destination. */
-    GET_SOURCE_ROUTE_OVERHEAD = 2
-}
-/** Flags associated with the endpoint data configured on the NCP. */
-export declare enum EzspEndpointFlag {
-    /** Indicates that the endpoint is disabled and NOT discoverable via ZDO. */
-    DISABLED = 0,
-    /** Indicates that the endpoint is enabled and discoverable via ZDO. */
-    ENABLED = 1
-}
-/** Notes the last leave reason. uint8_t */
-export declare enum EmberLeaveReason {
-    REASON_NONE = 0,
-    DUE_TO_NWK_LEAVE_MESSAGE = 1,
-    DUE_TO_APS_REMOVE_MESSAGE = 2,
-    DUE_TO_ZDO_LEAVE_MESSAGE = 3,
-    DUE_TO_ZLL_TOUCHLINK = 4,
-    DUE_TO_APP_EVENT_1 = 255
-}
-/** Notes the last rejoin reason. uint8_t */
-export declare enum EmberRejoinReason {
-    REASON_NONE = 0,
-    DUE_TO_NWK_KEY_UPDATE = 1,
-    DUE_TO_LEAVE_MESSAGE = 2,
-    DUE_TO_NO_PARENT = 3,
-    DUE_TO_ZLL_TOUCHLINK = 4,
-    DUE_TO_END_DEVICE_REBOOT = 5,
-    DUE_TO_APP_EVENT_5 = 251,
-    DUE_TO_APP_EVENT_4 = 252,
-    DUE_TO_APP_EVENT_3 = 253,
-    DUE_TO_APP_EVENT_2 = 254,
-    DUE_TO_APP_EVENT_1 = 255
-}
-/** Manufacturing token IDs used by ezspGetMfgToken(). */
-export declare enum EzspMfgTokenId {
-    /** Custom version (2 bytes). */
-    CUSTOM_VERSION = 0,
-    /** Manufacturing string (16 bytes). */
-    STRING = 1,
-    /** Board name (16 bytes). */
-    BOARD_NAME = 2,
-    /** Manufacturing ID (2 bytes). */
-    MANUF_ID = 3,
-    /** Radio configuration (2 bytes). */
-    PHY_CONFIG = 4,
-    /** Bootload AES key (16 bytes). */
-    BOOTLOAD_AES_KEY = 5,
-    /** ASH configuration (40 bytes). */
-    ASH_CONFIG = 6,
-    /** EZSP storage (8 bytes). */
-    EZSP_STORAGE = 7,
-    /**
-     * Radio calibration data (64 bytes). 4 bytes are stored for each of the 16 channels.
-     * This token is not stored in the Flash Information Area. It is updated by the stack each time a calibration is performed.
-     */
-    STACK_CAL_DATA = 8,
-    /** Certificate Based Key Exchange (CBKE) data (92 bytes). */
-    CBKE_DATA = 9,
-    /** Installation code (20 bytes). */
-    INSTALLATION_CODE = 10,
-    /**
-     * Radio channel filter calibration data (1 byte).
-     * This token is not stored in the Flash Information Area. It is updated by the stack each time a calibration is performed.
-     */
-    STACK_CAL_FILTER = 11,
-    /** Custom EUI64 MAC address (8 bytes). */
-    CUSTOM_EUI_64 = 12,
-    /** CTUNE value (2 byte). */
-    CTUNE = 13
-}
-export declare enum EzspSleepMode {
-    /** Processor idle. */
-    IDLE = 0,
-    /** Wake on interrupt or timer. */
-    DEEP_SLEEP = 1,
-    /** Wake on interrupt only. */
-    POWER_DOWN = 2,
-    /** Reserved */
-    RESERVED_SLEEP = 3
-}
-//# sourceMappingURL=enums.d.ts.map