zigbee-herdsman 0.50.1 → 0.52.0

package/dist/adapter/ember/enums.js

@@ -1,7 +1,7 @@
 "use strict";
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.EmberGpSinkTableEntryStatus = exports.EmberGpSinkType = exports.EmberGpProxyTableEntryStatus = exports.EmberGpKeyType = exports.EmberGpSecurityLevel = exports.EmberGpApplicationId = exports.EmberZllKeyIndex = exports.EzspZllNetworkOperation = exports.EmberZllState = exports.EmberJoinDecision = exports.EmberDeviceUpdate = exports.EmberKeyStructBitmask = exports.EmberKeyStatus = exports.SecManFlag = exports.SecManDerivedKeyType = exports.SecManKeyType = exports.EmberCurrentSecurityBitmask = exports.EmberInterpanMessageType = exports.EmberMacPassthroughType = exports.EmberSourceRouteDiscoveryMode = exports.EmberApsOption = exports.EmberIncomingMessageType = exports.EmberOutgoingMessageType = exports.EmberBindingType = exports.EmberDutyCycleState = exports.EmberMultiPhyNwkConfig = exports.EmberNodeType = exports.EmberJoinMethod = exports.EzspNetworkScanType = exports.EmberNetworkStatus = exports.EmberNetworkInitBitmask = exports.EmberEntropySource = exports.EmberLibraryStatus = exports.EmberLibraryId = exports.EmberCounterType = exports.EmberEventUnits = exports.EmberInitialSecurityBitmask = exports.EmberExtendedSecurityBitmask = exports.EmberKeepAliveMode = exports.EmberTXPowerMode = exports.EmberLeaveRequestFlags = exports.EmberVersionType = exports.EmberStackError = exports.EzspStatus = exports.EmberStatus = exports.SLStatus = void 0;
-/** Status Defines */
+exports.EmberTransmitPriority = exports.EmberLeaveNetworkOption = exports.EmberGpSinkTableEntryStatus = exports.EmberGpSinkType = exports.EmberGpProxyTableEntryStatus = exports.EmberGpKeyType = exports.EmberGpSecurityLevel = exports.EmberGpApplicationId = exports.EmberZllKeyIndex = exports.EzspZllNetworkOperation = exports.EmberZllState = exports.EmberJoinDecision = exports.EmberDeviceUpdate = exports.EmberKeyStructBitmask = exports.EmberKeyStatus = exports.SecManFlag = exports.SecManDerivedKeyType = exports.SecManKeyType = exports.EmberCurrentSecurityBitmask = exports.EmberInterpanMessageType = exports.EmberMacPassthroughType = exports.EmberSourceRouteDiscoveryMode = exports.EmberApsOption = exports.EmberIncomingMessageType = exports.EmberOutgoingMessageType = exports.EmberBindingType = exports.EmberDutyCycleState = exports.EmberMultiPhyNwkConfig = exports.EmberNodeType = exports.EmberJoinMethod = exports.EzspNetworkScanType = exports.EmberNetworkStatus = exports.EmberNetworkInitBitmask = exports.EmberEntropySource = exports.EmberLibraryStatus = exports.EmberLibraryId = exports.EmberCounterType = exports.EmberEventUnits = exports.EmberInitialSecurityBitmask = exports.EmberExtendedSecurityBitmask = exports.EmberKeepAliveMode = exports.EmberTXPowerMode = exports.EmberVersionType = exports.EmberGPStatus = exports.EmberStackError = exports.EzspStatus = exports.SLStatus = void 0;
+/** Status Codes contains error and status code definitions used by Simplicity SDK software components and stacks. */
 var SLStatus;
 (function (SLStatus) {
     // -----------------------------------------------------------------------------
@@ -193,6 +193,38 @@ var SLStatus;
     /** Bad scan duration. */
     SLStatus[SLStatus["BAD_SCAN_DURATION"] = 80] = "BAD_SCAN_DURATION";
     // -----------------------------------------------------------------------------
+    // MAC transmit related status
+    /** The MAC transmit queue is full */
+    SLStatus[SLStatus["MAC_TRANSMIT_QUEUE_FULL"] = 83] = "MAC_TRANSMIT_QUEUE_FULL";
+    /**
+     * The transmit attempt failed because the radio scheduler could not find a slot to transmit this packet in or
+     * a higher priority event interrupted it
+     */
+    SLStatus[SLStatus["TRANSMIT_SCHEDULER_FAIL"] = 84] = "TRANSMIT_SCHEDULER_FAIL";
+    /** An unsupported channel setting was specified */
+    SLStatus[SLStatus["TRANSMIT_INVALID_CHANNEL"] = 85] = "TRANSMIT_INVALID_CHANNEL";
+    /** An unsupported power setting was specified */
+    SLStatus[SLStatus["TRANSMIT_INVALID_POWER"] = 86] = "TRANSMIT_INVALID_POWER";
+    /** The expected ACK was received after the last transmission */
+    SLStatus[SLStatus["TRANSMIT_ACK_RECEIVED"] = 87] = "TRANSMIT_ACK_RECEIVED";
+    /**
+     * The transmit attempt was blocked from going over the air.
+     * Typically this is due to the Radio Hold Off (RHO) or Coexistence plugins as they can prevent transmits based on external signals.
+     */
+    SLStatus[SLStatus["TRANSMIT_BLOCKED"] = 88] = "TRANSMIT_BLOCKED";
+    // -----------------------------------------------------------------------------
+    // NVM3 specific errors
+    /** The initialization was aborted as the NVM3 instance is not aligned properly in memory */
+    SLStatus[SLStatus["NVM3_ALIGNMENT_INVALID"] = 89] = "NVM3_ALIGNMENT_INVALID";
+    /** The initialization was aborted as the size of the NVM3 instance is too small */
+    SLStatus[SLStatus["NVM3_SIZE_TOO_SMALL"] = 90] = "NVM3_SIZE_TOO_SMALL";
+    /** The initialization was aborted as the NVM3 page size is not supported */
+    SLStatus[SLStatus["NVM3_PAGE_SIZE_NOT_SUPPORTED"] = 91] = "NVM3_PAGE_SIZE_NOT_SUPPORTED";
+    /** The application that there was an error initializing some of the tokens */
+    SLStatus[SLStatus["NVM3_TOKEN_INIT_FAILED"] = 92] = "NVM3_TOKEN_INIT_FAILED";
+    /** The initialization was aborted as the NVM3 instance was already opened with other parameters */
+    SLStatus[SLStatus["NVM3_OPENED_WITH_OTHER_PARAMETERS"] = 93] = "NVM3_OPENED_WITH_OTHER_PARAMETERS";
+    // -----------------------------------------------------------------------------
     // Bluetooth status codes
     /** Bonding procedure can't be started because device has no space left for bond. */
     SLStatus[SLStatus["BT_OUT_OF_BONDS"] = 1026] = "BT_OUT_OF_BONDS";
@@ -601,439 +633,79 @@ var SLStatus;
     SLStatus[SLStatus["COMPUTE_MATH_OVERFLOW"] = 5396] = "COMPUTE_MATH_OVERFLOW";
     /** MATH numeric underflow */
     SLStatus[SLStatus["COMPUTE_MATH_UNDERFLOW"] = 5397] = "COMPUTE_MATH_UNDERFLOW";
-})(SLStatus || (exports.SLStatus = SLStatus = {}));
-;
-/**
- * Many EmberZNet API functions return an ::EmberStatus value to indicate the success or failure of the call.
- * Return codes are one byte long.
- */
-var EmberStatus;
-(function (EmberStatus) {
-    // Generic Messages. These messages are system wide.
-    /** The generic "no error" message. */
-    EmberStatus[EmberStatus["SUCCESS"] = 0] = "SUCCESS";
-    /** The generic "fatal error" message. */
-    EmberStatus[EmberStatus["ERR_FATAL"] = 1] = "ERR_FATAL";
-    /** An invalid value was passed as an argument to a function. */
-    EmberStatus[EmberStatus["BAD_ARGUMENT"] = 2] = "BAD_ARGUMENT";
-    /** The requested information was not found. */
-    EmberStatus[EmberStatus["NOT_FOUND"] = 3] = "NOT_FOUND";
-    /** The manufacturing and stack token format in non-volatile memory is different than what the stack expects (returned at initialization). */
-    EmberStatus[EmberStatus["EEPROM_MFG_STACK_VERSION_MISMATCH"] = 4] = "EEPROM_MFG_STACK_VERSION_MISMATCH";
-    /** The manufacturing token format in non-volatile memory is different than what the stack expects (returned at initialization). */
-    EmberStatus[EmberStatus["EEPROM_MFG_VERSION_MISMATCH"] = 6] = "EEPROM_MFG_VERSION_MISMATCH";
-    /** The stack token format in non-volatile memory is different than what the stack expects (returned at initialization). */
-    EmberStatus[EmberStatus["EEPROM_STACK_VERSION_MISMATCH"] = 7] = "EEPROM_STACK_VERSION_MISMATCH";
-    // Packet Buffer Module Errors
-    /** There are no more buffers. */
-    EmberStatus[EmberStatus["NO_BUFFERS"] = 24] = "NO_BUFFERS";
-    /** Packet is dropped by packet-handoff callbacks. */
-    EmberStatus[EmberStatus["PACKET_HANDOFF_DROP_PACKET"] = 25] = "PACKET_HANDOFF_DROP_PACKET";
-    // Serial Manager Errors
-    /** Specifies an invalid baud rate. */
-    EmberStatus[EmberStatus["SERIAL_INVALID_BAUD_RATE"] = 32] = "SERIAL_INVALID_BAUD_RATE";
-    /** Specifies an invalid serial port. */
-    EmberStatus[EmberStatus["SERIAL_INVALID_PORT"] = 33] = "SERIAL_INVALID_PORT";
-    /** Tried to send too much data. */
-    EmberStatus[EmberStatus["SERIAL_TX_OVERFLOW"] = 34] = "SERIAL_TX_OVERFLOW";
-    /** There wasn't enough space to store a received character and the character was dropped. */
-    EmberStatus[EmberStatus["SERIAL_RX_OVERFLOW"] = 35] = "SERIAL_RX_OVERFLOW";
-    /** Detected a UART framing error. */
-    EmberStatus[EmberStatus["SERIAL_RX_FRAME_ERROR"] = 36] = "SERIAL_RX_FRAME_ERROR";
-    /** Detected a UART parity error. */
-    EmberStatus[EmberStatus["SERIAL_RX_PARITY_ERROR"] = 37] = "SERIAL_RX_PARITY_ERROR";
-    /** There is no received data to process. */
-    EmberStatus[EmberStatus["SERIAL_RX_EMPTY"] = 38] = "SERIAL_RX_EMPTY";
-    /** The receive interrupt was not handled in time and a character was dropped. */
-    EmberStatus[EmberStatus["SERIAL_RX_OVERRUN_ERROR"] = 39] = "SERIAL_RX_OVERRUN_ERROR";
-    // MAC Errors
-    /** The MAC transmit queue is full. */
-    EmberStatus[EmberStatus["MAC_TRANSMIT_QUEUE_FULL"] = 57] = "MAC_TRANSMIT_QUEUE_FULL";
-    // Internal
-    /** MAC header FCF error on receive. */
-    EmberStatus[EmberStatus["MAC_UNKNOWN_HEADER_TYPE"] = 58] = "MAC_UNKNOWN_HEADER_TYPE";
-    /** MAC ACK header received. */
-    EmberStatus[EmberStatus["MAC_ACK_HEADER_TYPE"] = 59] = "MAC_ACK_HEADER_TYPE";
-    /** The MAC can't complete this task because it is scanning. */
-    EmberStatus[EmberStatus["MAC_SCANNING"] = 61] = "MAC_SCANNING";
-    /** No pending data exists for a data poll. */
-    EmberStatus[EmberStatus["MAC_NO_DATA"] = 49] = "MAC_NO_DATA";
-    /** Attempts to scan when joined to a network. */
-    EmberStatus[EmberStatus["MAC_JOINED_NETWORK"] = 50] = "MAC_JOINED_NETWORK";
-    /** Scan duration must be 0 to 14 inclusive. Tried to scan with an incorrect duration value. */
-    EmberStatus[EmberStatus["MAC_BAD_SCAN_DURATION"] = 51] = "MAC_BAD_SCAN_DURATION";
-    /** emberStartScan was called with an incorrect scan type. */
-    EmberStatus[EmberStatus["MAC_INCORRECT_SCAN_TYPE"] = 52] = "MAC_INCORRECT_SCAN_TYPE";
-    /** emberStartScan was called with an invalid channel mask. */
-    EmberStatus[EmberStatus["MAC_INVALID_CHANNEL_MASK"] = 53] = "MAC_INVALID_CHANNEL_MASK";
-    /** Failed to scan the current channel because the relevant MAC command could not be transmitted. */
-    EmberStatus[EmberStatus["MAC_COMMAND_TRANSMIT_FAILURE"] = 54] = "MAC_COMMAND_TRANSMIT_FAILURE";
-    /** An ACK was expected following the transmission but the MAC level ACK was never received. */
-    EmberStatus[EmberStatus["MAC_NO_ACK_RECEIVED"] = 64] = "MAC_NO_ACK_RECEIVED";
-    /** MAC failed to transmit a message because it could not successfully perform a radio network switch. */
-    EmberStatus[EmberStatus["MAC_RADIO_NETWORK_SWITCH_FAILED"] = 65] = "MAC_RADIO_NETWORK_SWITCH_FAILED";
-    /** An indirect data message timed out before a poll requested it. */
-    EmberStatus[EmberStatus["MAC_INDIRECT_TIMEOUT"] = 66] = "MAC_INDIRECT_TIMEOUT";
-    // Simulated EEPROM Errors
-    /**
-     * The Simulated EEPROM is telling the application that at least one flash page to be erased.
-     * The GREEN status means the current page has not filled above the ::ERASE_CRITICAL_THRESHOLD.
-     *
-     * The application should call the function ::halSimEepromErasePage() when it can to erase a page.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_ERASE_PAGE_GREEN"] = 67] = "SIM_EEPROM_ERASE_PAGE_GREEN";
-    /**
-     * The Simulated EEPROM is telling the application that at least one flash page must be erased.
-     * The RED status means the current page has filled above the ::ERASE_CRITICAL_THRESHOLD.
-     *
-     * Due to the shrinking availability of write space, data could be lost.
-     * The application must call the function ::halSimEepromErasePage() as soon as possible to erase a page.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_ERASE_PAGE_RED"] = 68] = "SIM_EEPROM_ERASE_PAGE_RED";
-    /**
-     * The Simulated EEPROM has run out of room to write new data and the data trying to be set has been lost.
-     * This error code is the result of ignoring the ::SIM_EEPROM_ERASE_PAGE_RED error code.
-     *
-     * The application must call the function ::halSimEepromErasePage() to make room for any further calls to set a token.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_FULL"] = 69] = "SIM_EEPROM_FULL";
-    //  Errors 46 and 47 are now defined below in the flash error block (was attempting to prevent renumbering).
-    /**
-     * Attempt 1 to initialize the Simulated EEPROM has failed.
-     *
-     * This failure means the information already stored in the Flash (or a lack thereof),
-     * is fatally incompatible with the token information compiled into the code image being run.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_INIT_1_FAILED"] = 72] = "SIM_EEPROM_INIT_1_FAILED";
-    /**
-     * Attempt 2 to initialize the Simulated EEPROM has failed.
-     *
-     * This failure means Attempt 1 failed, and the token system failed to properly reload default tokens and reset the Simulated EEPROM.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_INIT_2_FAILED"] = 73] = "SIM_EEPROM_INIT_2_FAILED";
-    /**
-     * Attempt 3 to initialize the Simulated EEPROM has failed.
-     *
-     * This failure means one or both of the tokens ::TOKEN_MFG_NVDATA_VERSION or ::TOKEN_STACK_NVDATA_VERSION
-     * were incorrect and the token system failed to properly reload default tokens and reset the Simulated EEPROM.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_INIT_3_FAILED"] = 74] = "SIM_EEPROM_INIT_3_FAILED";
-    /**
-     * The Simulated EEPROM is repairing itself.
-     *
-     * While there's nothing for an app to do when the SimEE is going to
-     * repair itself (SimEE has to be fully functional for the rest of the
-     * system to work), alert the application to the fact that repair
-     * is occurring.  There are debugging scenarios where an app might want
-     * to know that repair is happening, such as monitoring frequency.
-     * @note  Common situations will trigger an expected repair, such as
-     *        using an erased chip or changing token definitions.
-     */
-    EmberStatus[EmberStatus["SIM_EEPROM_REPAIRING"] = 77] = "SIM_EEPROM_REPAIRING";
-    // Flash Errors
-    /**
-     * A fatal error has occurred while trying to write data to the Flash.
-     * The target memory attempting to be programmed is already programmed.
-     * The flash write routines were asked to flip a bit from a 0 to 1,
-     * which is physically impossible and the write was therefore inhibited.
-     * The data in the Flash cannot be trusted after this error.
-     */
-    EmberStatus[EmberStatus["ERR_FLASH_WRITE_INHIBITED"] = 70] = "ERR_FLASH_WRITE_INHIBITED";
-    /**
-     * A fatal error has occurred while trying to write data to the Flash and the write verification has failed.
-     * Data in the Flash cannot be trusted after this error and it is possible this error is the result of exceeding the life cycles of the Flash.
-     */
-    EmberStatus[EmberStatus["ERR_FLASH_VERIFY_FAILED"] = 71] = "ERR_FLASH_VERIFY_FAILED";
-    /**
-     * A fatal error has occurred while trying to write data to the Flash possibly due to write protection or an invalid address.
-     * Data in the Flash cannot be trusted after this error and it is possible this error is the result of exceeding the life cycles of the Flash.
-     */
-    EmberStatus[EmberStatus["ERR_FLASH_PROG_FAIL"] = 75] = "ERR_FLASH_PROG_FAIL";
-    /**
-     * A fatal error has occurred while trying to erase the Flash possibly due to write protection.
-     * Data in the Flash cannot be trusted after this error and it is possible this error is the result of exceeding the life cycles of the Flash.
-     */
-    EmberStatus[EmberStatus["ERR_FLASH_ERASE_FAIL"] = 76] = "ERR_FLASH_ERASE_FAIL";
-    // Bootloader Errors
-    /** The bootloader received an invalid message (failed attempt to go into bootloader). */
-    EmberStatus[EmberStatus["ERR_BOOTLOADER_TRAP_TABLE_BAD"] = 88] = "ERR_BOOTLOADER_TRAP_TABLE_BAD";
-    /** The bootloader received an invalid message (failed attempt to go into the bootloader). */
-    EmberStatus[EmberStatus["ERR_BOOTLOADER_TRAP_UNKNOWN"] = 89] = "ERR_BOOTLOADER_TRAP_UNKNOWN";
-    /** The bootloader cannot complete the bootload operation because either an image was not found or the image exceeded memory bounds. */
-    EmberStatus[EmberStatus["ERR_BOOTLOADER_NO_IMAGE"] = 90] = "ERR_BOOTLOADER_NO_IMAGE";
-    // Transport Errors
-    /** The APS layer attempted to send or deliver a message and failed. */
-    EmberStatus[EmberStatus["DELIVERY_FAILED"] = 102] = "DELIVERY_FAILED";
-    /** This binding index is out of range for the current binding table. */
-    EmberStatus[EmberStatus["BINDING_INDEX_OUT_OF_RANGE"] = 105] = "BINDING_INDEX_OUT_OF_RANGE";
-    /** This address table index is out of range for the current address table. */
-    EmberStatus[EmberStatus["ADDRESS_TABLE_INDEX_OUT_OF_RANGE"] = 106] = "ADDRESS_TABLE_INDEX_OUT_OF_RANGE";
-    /** An invalid binding table index was given to a function. */
-    EmberStatus[EmberStatus["INVALID_BINDING_INDEX"] = 108] = "INVALID_BINDING_INDEX";
-    /** The API call is not allowed given the current state of the stack. */
-    EmberStatus[EmberStatus["INVALID_CALL"] = 112] = "INVALID_CALL";
-    /** The link cost to a node is not known. */
-    EmberStatus[EmberStatus["COST_NOT_KNOWN"] = 113] = "COST_NOT_KNOWN";
-    /** The maximum number of in-flight messages  = i.e., ::EMBER_APS_UNICAST_MESSAGE_COUNT, has been reached. */
-    EmberStatus[EmberStatus["MAX_MESSAGE_LIMIT_REACHED"] = 114] = "MAX_MESSAGE_LIMIT_REACHED";
-    /** The message to be transmitted is too big to fit into a single over-the-air packet. */
-    EmberStatus[EmberStatus["MESSAGE_TOO_LONG"] = 116] = "MESSAGE_TOO_LONG";
-    /** The application is trying to delete or overwrite a binding that is in use. */
-    EmberStatus[EmberStatus["BINDING_IS_ACTIVE"] = 117] = "BINDING_IS_ACTIVE";
-    /** The application is trying to overwrite an address table entry that is in use. */
-    EmberStatus[EmberStatus["ADDRESS_TABLE_ENTRY_IS_ACTIVE"] = 118] = "ADDRESS_TABLE_ENTRY_IS_ACTIVE";
-    /** An attempt was made to transmit during the suspend period. */
-    EmberStatus[EmberStatus["TRANSMISSION_SUSPENDED"] = 119] = "TRANSMISSION_SUSPENDED";
-    // Green Power status codes
-    /** Security match. */
-    EmberStatus[EmberStatus["MATCH"] = 120] = "MATCH";
-    /** Drop frame. */
-    EmberStatus[EmberStatus["DROP_FRAME"] = 121] = "DROP_FRAME";
-    /** */
-    EmberStatus[EmberStatus["PASS_UNPROCESSED"] = 122] = "PASS_UNPROCESSED";
-    /** */
-    EmberStatus[EmberStatus["TX_THEN_DROP"] = 123] = "TX_THEN_DROP";
-    /** */
-    EmberStatus[EmberStatus["NO_SECURITY"] = 124] = "NO_SECURITY";
-    /** */
-    EmberStatus[EmberStatus["COUNTER_FAILURE"] = 125] = "COUNTER_FAILURE";
-    /** */
-    EmberStatus[EmberStatus["AUTH_FAILURE"] = 126] = "AUTH_FAILURE";
-    /** */
-    EmberStatus[EmberStatus["UNPROCESSED"] = 127] = "UNPROCESSED";
-    // HAL Module Errors
-    /** The conversion is complete. */
-    EmberStatus[EmberStatus["ADC_CONVERSION_DONE"] = 128] = "ADC_CONVERSION_DONE";
-    /** The conversion cannot be done because a request is being processed. */
-    EmberStatus[EmberStatus["ADC_CONVERSION_BUSY"] = 129] = "ADC_CONVERSION_BUSY";
-    /** The conversion is deferred until the current request has been processed. */
-    EmberStatus[EmberStatus["ADC_CONVERSION_DEFERRED"] = 130] = "ADC_CONVERSION_DEFERRED";
-    /** No results are pending. */
-    EmberStatus[EmberStatus["ADC_NO_CONVERSION_PENDING"] = 132] = "ADC_NO_CONVERSION_PENDING";
-    /** Sleeping (for a duration) has been abnormally interrupted and exited prematurely. */
-    EmberStatus[EmberStatus["SLEEP_INTERRUPTED"] = 133] = "SLEEP_INTERRUPTED";
-    // PHY Errors
-    /**
-     * The transmit attempt failed because the radio scheduler could not find a slot
-     * to transmit this packet in or a higher priority event interrupted it.
-     */
-    EmberStatus[EmberStatus["PHY_TX_SCHED_FAIL"] = 135] = "PHY_TX_SCHED_FAIL";
-    /** The transmit hardware buffer underflowed. */
-    EmberStatus[EmberStatus["PHY_TX_UNDERFLOW"] = 136] = "PHY_TX_UNDERFLOW";
-    /** The transmit hardware did not finish transmitting a packet. */
-    EmberStatus[EmberStatus["PHY_TX_INCOMPLETE"] = 137] = "PHY_TX_INCOMPLETE";
-    /** An unsupported channel setting was specified. */
-    EmberStatus[EmberStatus["PHY_INVALID_CHANNEL"] = 138] = "PHY_INVALID_CHANNEL";
-    /** An unsupported power setting was specified. */
-    EmberStatus[EmberStatus["PHY_INVALID_POWER"] = 139] = "PHY_INVALID_POWER";
-    /** The requested operation cannot be completed because the radio is currently busy, either transmitting a packet or performing calibration. */
-    EmberStatus[EmberStatus["PHY_TX_BUSY"] = 140] = "PHY_TX_BUSY";
-    /** The transmit attempt failed because all CCA attempts indicated that the channel was busy. */
-    EmberStatus[EmberStatus["PHY_TX_CCA_FAIL"] = 141] = "PHY_TX_CCA_FAIL";
+    // -----------------------------------------------------------------------------
+    // Zigbee status codes
+    /** Packet is dropped by packet-handoff callbacks */
+    SLStatus[SLStatus["ZIGBEE_PACKET_HANDOFF_DROPPED"] = 3073] = "ZIGBEE_PACKET_HANDOFF_DROPPED";
+    /** The APS layer attempted to send or deliver a message and failed */
+    SLStatus[SLStatus["ZIGBEE_DELIVERY_FAILED"] = 3074] = "ZIGBEE_DELIVERY_FAILED";
+    /** The maximum number of in-flight messages ::EMBER_APS_UNICAST_MESSAGE_COUNT has been reached */
+    SLStatus[SLStatus["ZIGBEE_MAX_MESSAGE_LIMIT_REACHED"] = 3075] = "ZIGBEE_MAX_MESSAGE_LIMIT_REACHED";
+    /** The application is trying to delete or overwrite a binding that is in use */
+    SLStatus[SLStatus["ZIGBEE_BINDING_IS_ACTIVE"] = 3076] = "ZIGBEE_BINDING_IS_ACTIVE";
+    /** The application is trying to overwrite an address table entry that is in use */
+    SLStatus[SLStatus["ZIGBEE_ADDRESS_TABLE_ENTRY_IS_ACTIVE"] = 3077] = "ZIGBEE_ADDRESS_TABLE_ENTRY_IS_ACTIVE";
+    /** After moving, a mobile node's attempt to re-establish contact with the network failed */
+    SLStatus[SLStatus["ZIGBEE_MOVE_FAILED"] = 3078] = "ZIGBEE_MOVE_FAILED";
+    /** The local node ID has changed. The application can get the new node ID by calling ::sl_zigbee_get_node_id() */
+    SLStatus[SLStatus["ZIGBEE_NODE_ID_CHANGED"] = 3079] = "ZIGBEE_NODE_ID_CHANGED";
+    /** The chosen security level is not supported by the stack */
+    SLStatus[SLStatus["ZIGBEE_INVALID_SECURITY_LEVEL"] = 3080] = "ZIGBEE_INVALID_SECURITY_LEVEL";
+    /** An error occurred when trying to encrypt at the APS Level */
+    SLStatus[SLStatus["ZIGBEE_IEEE_ADDRESS_DISCOVERY_IN_PROGRESS"] = 3081] = "ZIGBEE_IEEE_ADDRESS_DISCOVERY_IN_PROGRESS";
+    /** An error occurred when trying to encrypt at the APS Level */
+    SLStatus[SLStatus["ZIGBEE_APS_ENCRYPTION_ERROR"] = 3082] = "ZIGBEE_APS_ENCRYPTION_ERROR";
+    /** There was an attempt to form or join a network with security without calling ::sl_zigbee_set_initial_security_state() first */
+    SLStatus[SLStatus["ZIGBEE_SECURITY_STATE_NOT_SET"] = 3083] = "ZIGBEE_SECURITY_STATE_NOT_SET";
     /**
-     * The transmit attempt was blocked from going over the air.
-     * Typically this is due to the Radio Hold Off (RHO) or Coexistence plugins as they can prevent transmits based on external signals.
-     */
-    EmberStatus[EmberStatus["PHY_TX_BLOCKED"] = 142] = "PHY_TX_BLOCKED";
-    /** The expected ACK was received after the last transmission. */
-    EmberStatus[EmberStatus["PHY_ACK_RECEIVED"] = 143] = "PHY_ACK_RECEIVED";
-    // Return Codes Passed to emberStackStatusHandler() See also ::emberStackStatusHandler = ,.
-    /** The stack software has completed initialization and is ready to send and receive packets over the air. */
-    EmberStatus[EmberStatus["NETWORK_UP"] = 144] = "NETWORK_UP";
-    /** The network is not operating. */
-    EmberStatus[EmberStatus["NETWORK_DOWN"] = 145] = "NETWORK_DOWN";
-    /** An attempt to join a network failed. */
-    EmberStatus[EmberStatus["JOIN_FAILED"] = 148] = "JOIN_FAILED";
-    /** After moving, a mobile node's attempt to re-establish contact with the network failed. */
-    EmberStatus[EmberStatus["MOVE_FAILED"] = 150] = "MOVE_FAILED";
-    /**
-     * An attempt to join as a router failed due to a Zigbee versus Zigbee Pro incompatibility.
-     * Zigbee devices joining Zigbee Pro networks (or vice versa) must join as End Devices, not Routers.
-     */
-    EmberStatus[EmberStatus["CANNOT_JOIN_AS_ROUTER"] = 152] = "CANNOT_JOIN_AS_ROUTER";
-    /** The local node ID has changed. The application can get the new node ID by calling ::emberGetNodeId(). */
-    EmberStatus[EmberStatus["NODE_ID_CHANGED"] = 153] = "NODE_ID_CHANGED";
-    /** The local PAN ID has changed. The application can get the new PAN ID by calling ::emberGetPanId(). */
-    EmberStatus[EmberStatus["PAN_ID_CHANGED"] = 154] = "PAN_ID_CHANGED";
+     * There was an attempt to broadcast a key switch too quickly after broadcasting the next network key.
+     * The Trust Center must wait at least a period equal to the broadcast timeout so that all routers have a chance
+     * to receive the broadcast of the new network key
+     */
+    SLStatus[SLStatus["ZIGBEE_TOO_SOON_FOR_SWITCH_KEY"] = 3084] = "ZIGBEE_TOO_SOON_FOR_SWITCH_KEY";
+    /** The received signature corresponding to the message that was passed to the CBKE Library failed verification and is not valid */
+    SLStatus[SLStatus["ZIGBEE_SIGNATURE_VERIFY_FAILURE"] = 3085] = "ZIGBEE_SIGNATURE_VERIFY_FAILURE";
+    /** The message could not be sent because the link key corresponding to the destination is not authorized for use in APS data messages */
+    SLStatus[SLStatus["ZIGBEE_KEY_NOT_AUTHORIZED"] = 3086] = "ZIGBEE_KEY_NOT_AUTHORIZED";
+    /** The application tried to use a binding that has been remotely modified and the change has not yet been reported to the application */
+    SLStatus[SLStatus["ZIGBEE_BINDING_HAS_CHANGED"] = 3087] = "ZIGBEE_BINDING_HAS_CHANGED";
+    /** The EUI of the Trust center has changed due to a successful rejoin after TC Swapout */
+    SLStatus[SLStatus["ZIGBEE_TRUST_CENTER_SWAP_EUI_HAS_CHANGED"] = 3088] = "ZIGBEE_TRUST_CENTER_SWAP_EUI_HAS_CHANGED";
+    /** A Trust Center Swapout Rejoin has occurred without the EUI of the TC changing */
+    SLStatus[SLStatus["ZIGBEE_TRUST_CENTER_SWAP_EUI_HAS_NOT_CHANGED"] = 3089] = "ZIGBEE_TRUST_CENTER_SWAP_EUI_HAS_NOT_CHANGED";
+    /** An attempt to generate random bytes failed because of insufficient random data from the radio */
+    SLStatus[SLStatus["ZIGBEE_INSUFFICIENT_RANDOM_DATA"] = 3090] = "ZIGBEE_INSUFFICIENT_RANDOM_DATA";
+    /** A Zigbee route error command frame was received indicating that a source routed message from this node failed en route */
+    SLStatus[SLStatus["ZIGBEE_SOURCE_ROUTE_FAILURE"] = 3091] = "ZIGBEE_SOURCE_ROUTE_FAILURE";
+    /** A Zigbee route error command frame was received indicating that a message sent to this node along a many-to-one route failed en route */
+    SLStatus[SLStatus["ZIGBEE_MANY_TO_ONE_ROUTE_FAILURE"] = 3092] = "ZIGBEE_MANY_TO_ONE_ROUTE_FAILURE";
+    /** A critical and fatal error indicating that the version of the stack trying to run does not match with the chip it's running on */
+    SLStatus[SLStatus["ZIGBEE_STACK_AND_HARDWARE_MISMATCH"] = 3093] = "ZIGBEE_STACK_AND_HARDWARE_MISMATCH";
+    /** The local PAN ID has changed. The application can get the new PAN ID by calling ::emberGetPanId() */
+    SLStatus[SLStatus["ZIGBEE_PAN_ID_CHANGED"] = 3094] = "ZIGBEE_PAN_ID_CHANGED";
     /** The channel has changed. */
-    EmberStatus[EmberStatus["CHANNEL_CHANGED"] = 155] = "CHANNEL_CHANGED";
+    SLStatus[SLStatus["ZIGBEE_CHANNEL_CHANGED"] = 3095] = "ZIGBEE_CHANNEL_CHANGED";
     /** The network has been opened for joining. */
-    EmberStatus[EmberStatus["NETWORK_OPENED"] = 156] = "NETWORK_OPENED";
+    SLStatus[SLStatus["ZIGBEE_NETWORK_OPENED"] = 3096] = "ZIGBEE_NETWORK_OPENED";
     /** The network has been closed for joining. */
-    EmberStatus[EmberStatus["NETWORK_CLOSED"] = 157] = "NETWORK_CLOSED";
-    /** An attempt to join or rejoin the network failed because no router beacons could be heard by the joining node. */
-    EmberStatus[EmberStatus["NO_BEACONS"] = 171] = "NO_BEACONS";
+    SLStatus[SLStatus["ZIGBEE_NETWORK_CLOSED"] = 3097] = "ZIGBEE_NETWORK_CLOSED";
     /**
      * An attempt was made to join a Secured Network using a pre-configured key, but the Trust Center sent back a
-     * Network Key in-the-clear when an encrypted Network Key was required. (::EMBER_REQUIRE_ENCRYPTED_KEY).
+     * Network Key in-the-clear when an encrypted Network Key was required. (::EMBER_REQUIRE_ENCRYPTED_KEY)
      */
-    EmberStatus[EmberStatus["RECEIVED_KEY_IN_THE_CLEAR"] = 172] = "RECEIVED_KEY_IN_THE_CLEAR";
+    SLStatus[SLStatus["ZIGBEE_RECEIVED_KEY_IN_THE_CLEAR"] = 3098] = "ZIGBEE_RECEIVED_KEY_IN_THE_CLEAR";
     /** An attempt was made to join a Secured Network, but the device did not receive a Network Key. */
-    EmberStatus[EmberStatus["NO_NETWORK_KEY_RECEIVED"] = 173] = "NO_NETWORK_KEY_RECEIVED";
+    SLStatus[SLStatus["ZIGBEE_NO_NETWORK_KEY_RECEIVED"] = 3099] = "ZIGBEE_NO_NETWORK_KEY_RECEIVED";
     /** After a device joined a Secured Network, a Link Key was requested (::EMBER_GET_LINK_KEY_WHEN_JOINING) but no response was ever received. */
-    EmberStatus[EmberStatus["NO_LINK_KEY_RECEIVED"] = 174] = "NO_LINK_KEY_RECEIVED";
-    /**
-     * An attempt was made to join a Secured Network without a pre-configured key,
-     * but the Trust Center sent encrypted data using a pre-configured key.
-     */
-    EmberStatus[EmberStatus["PRECONFIGURED_KEY_REQUIRED"] = 175] = "PRECONFIGURED_KEY_REQUIRED";
-    // Security Errors
-    /** The passed key data is not valid. A key of all zeros or all F's are reserved values and cannot be used. */
-    EmberStatus[EmberStatus["KEY_INVALID"] = 178] = "KEY_INVALID";
-    /** The chosen security level (the value of ::EMBER_SECURITY_LEVEL) is not supported by the stack. */
-    EmberStatus[EmberStatus["INVALID_SECURITY_LEVEL"] = 149] = "INVALID_SECURITY_LEVEL";
-    /**
-     * An error occurred when trying to encrypt at the APS Level.
-     *
-     * To APS encrypt an outgoing packet, the sender
-     * needs to know the EUI64 of the destination. This error occurs because
-     * the EUI64 of the destination can't be determined from
-     * the short address (no entry in the neighbor, child, binding
-     * or address tables).
-     *
-     * Every time this error code is seen, note that the stack initiates an
-     * IEEE address discovery request behind the scenes. Responses
-     * to the request are stored in the trust center cache portion of the
-     * address table. Note that you need at least 1 entry allocated for
-     * TC cache in the address table plugin. Depending on the available rows in
-     * the table, newly discovered addresses may replace old ones. The address
-     * table plugin is enabled by default on the host. If you are using an SoC
-     * platform, please be sure to add the address table plugin.
-     *
-     * When customers choose to send APS messages by using short addresses,
-     * they should incorporate a retry mechanism and try again, no sooner than
-     * 2 seconds later, to resend the APS message. If the app always
-     * receives 0xBE (IEEE_ADDRESS_DISCOVERY_IN_PROGRESS) after
-     * multiple retries, that might indicate that:
-     * a) destination node is not on the network
-     * b) there are problems with the health of the network
-     * c) there may not be any space set aside in the address table for
-     *    the newly discovered address - this can be rectified by reserving
-     *    more entries for the trust center cache in the address table plugin
-     */
-    EmberStatus[EmberStatus["IEEE_ADDRESS_DISCOVERY_IN_PROGRESS"] = 190] = "IEEE_ADDRESS_DISCOVERY_IN_PROGRESS";
-    /**
-     * An error occurred when trying to encrypt at the APS Level.
-     *
-     * This error occurs either because the long address of the recipient can't be
-     * determined from the short address (no entry in the binding table)
-     * or there is no link key entry in the table associated with the destination,
-     * or there was a failure to load the correct key into the encryption core.
-     */
-    EmberStatus[EmberStatus["APS_ENCRYPTION_ERROR"] = 166] = "APS_ENCRYPTION_ERROR";
-    /** There was an attempt to form or join a network with security without calling ::emberSetInitialSecurityState() first. */
-    EmberStatus[EmberStatus["SECURITY_STATE_NOT_SET"] = 168] = "SECURITY_STATE_NOT_SET";
-    /**
-     * There was an attempt to set an entry in the key table using an invalid long address. Invalid addresses include:
-     *    - The local device's IEEE address
-     *    - Trust Center's IEEE address
-     *    - An existing table entry's IEEE address
-     *    - An address consisting of all zeros or all F's
-     */
-    EmberStatus[EmberStatus["KEY_TABLE_INVALID_ADDRESS"] = 179] = "KEY_TABLE_INVALID_ADDRESS";
-    /** There was an attempt to set a security configuration that is not valid given the other security settings. */
-    EmberStatus[EmberStatus["SECURITY_CONFIGURATION_INVALID"] = 183] = "SECURITY_CONFIGURATION_INVALID";
+    SLStatus[SLStatus["ZIGBEE_NO_LINK_KEY_RECEIVED"] = 3100] = "ZIGBEE_NO_LINK_KEY_RECEIVED";
     /**
-     * There was an attempt to broadcast a key switch too quickly after broadcasting the next network key.
-     * The Trust Center must wait at least a period equal to the broadcast timeout so that all routers have a chance
-     * to receive the broadcast of the new network key.
+     * An attempt was made to join a Secured Network without a pre-configured key, but the Trust Center sent encrypted data using a
+     * pre-configured key.
      */
-    EmberStatus[EmberStatus["TOO_SOON_FOR_SWITCH_KEY"] = 184] = "TOO_SOON_FOR_SWITCH_KEY";
-    /** The received signature corresponding to the message that was passed to the CBKE Library failed verification and is not valid. */
-    EmberStatus[EmberStatus["SIGNATURE_VERIFY_FAILURE"] = 185] = "SIGNATURE_VERIFY_FAILURE";
-    /**
-     * The message could not be sent because the link key corresponding to the destination is not authorized for use in APS data messages.
-     * APS Commands (sent by the stack) are allowed.
-     * To use it for encryption of APS data messages it must be authorized using a key agreement protocol (such as CBKE).
-    */
-    EmberStatus[EmberStatus["KEY_NOT_AUTHORIZED"] = 187] = "KEY_NOT_AUTHORIZED";
-    /** The security data provided was not valid, or an integrity check failed. */
-    EmberStatus[EmberStatus["SECURITY_DATA_INVALID"] = 189] = "SECURITY_DATA_INVALID";
-    // Miscellaneous Network Errors
-    /** The node has not joined a network. */
-    EmberStatus[EmberStatus["NOT_JOINED"] = 147] = "NOT_JOINED";
-    /** A message cannot be sent because the network is currently overloaded. */
-    EmberStatus[EmberStatus["NETWORK_BUSY"] = 161] = "NETWORK_BUSY";
-    /** The application tried to send a message using an endpoint that it has not defined. */
-    EmberStatus[EmberStatus["INVALID_ENDPOINT"] = 163] = "INVALID_ENDPOINT";
-    /** The application tried to use a binding that has been remotely modified and the change has not yet been reported to the application. */
-    EmberStatus[EmberStatus["BINDING_HAS_CHANGED"] = 164] = "BINDING_HAS_CHANGED";
-    /** An attempt to generate random bytes failed because of insufficient random data from the radio. */
-    EmberStatus[EmberStatus["INSUFFICIENT_RANDOM_DATA"] = 165] = "INSUFFICIENT_RANDOM_DATA";
-    /** A Zigbee route error command frame was received indicating that a source routed message from this node failed en route. */
-    EmberStatus[EmberStatus["SOURCE_ROUTE_FAILURE"] = 169] = "SOURCE_ROUTE_FAILURE";
-    /**
-     * A Zigbee route error command frame was received indicating that a message sent to this node along a many-to-one route failed en route.
-     * The route error frame was delivered by an ad-hoc search for a functioning route.
-     */
-    EmberStatus[EmberStatus["MANY_TO_ONE_ROUTE_FAILURE"] = 170] = "MANY_TO_ONE_ROUTE_FAILURE";
-    // Miscellaneous Utility Errors
-    /**
-     * A critical and fatal error indicating that the version of the
-     * stack trying to run does not match with the chip it's running on. The
-     * software (stack) on the chip must be replaced with software
-     * compatible with the chip.
-     */
-    EmberStatus[EmberStatus["STACK_AND_HARDWARE_MISMATCH"] = 176] = "STACK_AND_HARDWARE_MISMATCH";
-    /** An index was passed into the function that was larger than the valid range. */
-    EmberStatus[EmberStatus["INDEX_OUT_OF_RANGE"] = 177] = "INDEX_OUT_OF_RANGE";
-    /** There are no empty entries left in the table. */
-    EmberStatus[EmberStatus["TABLE_FULL"] = 180] = "TABLE_FULL";
-    /** The requested table entry has been erased and contains no valid data. */
-    EmberStatus[EmberStatus["TABLE_ENTRY_ERASED"] = 182] = "TABLE_ENTRY_ERASED";
-    /** The requested function cannot be executed because the library that contains the necessary functionality is not present. */
-    EmberStatus[EmberStatus["LIBRARY_NOT_PRESENT"] = 181] = "LIBRARY_NOT_PRESENT";
-    /** The stack accepted the command and is currently processing the request. The results will be returned via an appropriate handler. */
-    EmberStatus[EmberStatus["OPERATION_IN_PROGRESS"] = 186] = "OPERATION_IN_PROGRESS";
-    /**
-     * The EUI of the Trust center has changed due to a successful rejoin.
-     * The device may need to perform other authentication to verify the new TC is authorized to take over.
-     */
-    EmberStatus[EmberStatus["TRUST_CENTER_EUI_HAS_CHANGED"] = 188] = "TRUST_CENTER_EUI_HAS_CHANGED";
-    /** Trust center swapped out. The EUI has changed. */
-    EmberStatus[EmberStatus["TRUST_CENTER_SWAPPED_OUT_EUI_HAS_CHANGED"] = 188] = "TRUST_CENTER_SWAPPED_OUT_EUI_HAS_CHANGED";
-    /** Trust center swapped out. The EUI has not changed. */
-    EmberStatus[EmberStatus["TRUST_CENTER_SWAPPED_OUT_EUI_HAS_NOT_CHANGED"] = 191] = "TRUST_CENTER_SWAPPED_OUT_EUI_HAS_NOT_CHANGED";
-    // NVM3 Token Errors
-    /** NVM3 is telling the application that the initialization was aborted as no valid NVM3 page was found. */
-    EmberStatus[EmberStatus["NVM3_TOKEN_NO_VALID_PAGES"] = 192] = "NVM3_TOKEN_NO_VALID_PAGES";
-    /** NVM3 is telling the application that the initialization was aborted as the NVM3 instance was already opened with other parameters. */
-    EmberStatus[EmberStatus["NVM3_ERR_OPENED_WITH_OTHER_PARAMETERS"] = 193] = "NVM3_ERR_OPENED_WITH_OTHER_PARAMETERS";
-    /** NVM3 is telling the application that the initialization was aborted as the NVM3 instance is not aligned properly in memory. */
-    EmberStatus[EmberStatus["NVM3_ERR_ALIGNMENT_INVALID"] = 194] = "NVM3_ERR_ALIGNMENT_INVALID";
-    /** NVM3 is telling the application that the initialization was aborted as the size of the NVM3 instance is too small. */
-    EmberStatus[EmberStatus["NVM3_ERR_SIZE_TOO_SMALL"] = 195] = "NVM3_ERR_SIZE_TOO_SMALL";
-    /** NVM3 is telling the application that the initialization was aborted as the NVM3 page size is not supported. */
-    EmberStatus[EmberStatus["NVM3_ERR_PAGE_SIZE_NOT_SUPPORTED"] = 196] = "NVM3_ERR_PAGE_SIZE_NOT_SUPPORTED";
-    /** NVM3 is telling the application that there was an error initializing some of the tokens. */
-    EmberStatus[EmberStatus["NVM3_ERR_TOKEN_INIT"] = 197] = "NVM3_ERR_TOKEN_INIT";
-    /** NVM3 is telling the application there has been an error when attempting to upgrade SimEE tokens. */
-    EmberStatus[EmberStatus["NVM3_ERR_UPGRADE"] = 198] = "NVM3_ERR_UPGRADE";
-    /** NVM3 is telling the application that there has been an unknown error. */
-    EmberStatus[EmberStatus["NVM3_ERR_UNKNOWN"] = 199] = "NVM3_ERR_UNKNOWN";
-    // Application Errors. These error codes are available for application use.
-    /**
-     * This error is reserved for customer application use.
-     *  This will never be returned from any portion of the network stack or HAL.
-     */
-    EmberStatus[EmberStatus["APPLICATION_ERROR_0"] = 240] = "APPLICATION_ERROR_0";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_1"] = 241] = "APPLICATION_ERROR_1";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_2"] = 242] = "APPLICATION_ERROR_2";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_3"] = 243] = "APPLICATION_ERROR_3";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_4"] = 244] = "APPLICATION_ERROR_4";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_5"] = 245] = "APPLICATION_ERROR_5";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_6"] = 246] = "APPLICATION_ERROR_6";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_7"] = 247] = "APPLICATION_ERROR_7";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_8"] = 248] = "APPLICATION_ERROR_8";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_9"] = 249] = "APPLICATION_ERROR_9";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_10"] = 250] = "APPLICATION_ERROR_10";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_11"] = 251] = "APPLICATION_ERROR_11";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_12"] = 252] = "APPLICATION_ERROR_12";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_13"] = 253] = "APPLICATION_ERROR_13";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_14"] = 254] = "APPLICATION_ERROR_14";
-    EmberStatus[EmberStatus["APPLICATION_ERROR_15"] = 255] = "APPLICATION_ERROR_15";
-})(EmberStatus || (exports.EmberStatus = EmberStatus = {}));
-;
+    SLStatus[SLStatus["ZIGBEE_PRECONFIGURED_KEY_REQUIRED"] = 3101] = "ZIGBEE_PRECONFIGURED_KEY_REQUIRED";
+    /** A Zigbee EZSP error has occured. Track the origin and corresponding EzspStatus for more info. */
+    SLStatus[SLStatus["ZIGBEE_EZSP_ERROR"] = 3102] = "ZIGBEE_EZSP_ERROR";
+})(SLStatus || (exports.SLStatus = SLStatus = {}));
 /** Status values used by EZSP. */
 var EzspStatus;
 (function (EzspStatus) {
@@ -1198,7 +870,6 @@ var EzspStatus;
     /** No reset or error */
     EzspStatus[EzspStatus["NO_ERROR"] = 255] = "NO_ERROR";
 })(EzspStatus || (exports.EzspStatus = EzspStatus = {}));
-;
 var EmberStackError;
 (function (EmberStackError) {
     // Error codes that a router uses to notify the message initiator about a broken route.
@@ -1223,6 +894,25 @@ var EmberStackError;
     EmberStackError[EmberStackError["NETWORK_STATUS_BAD_KEY_SEQUENCE_NUMBER"] = 18] = "NETWORK_STATUS_BAD_KEY_SEQUENCE_NUMBER";
     EmberStackError[EmberStackError["NETWORK_STATUS_UNKNOWN_COMMAND"] = 19] = "NETWORK_STATUS_UNKNOWN_COMMAND";
 })(EmberStackError || (exports.EmberStackError = EmberStackError = {}));
+var EmberGPStatus;
+(function (EmberGPStatus) {
+    /** Success Status */
+    EmberGPStatus[EmberGPStatus["OK"] = 0] = "OK";
+    /** Match Frame */
+    EmberGPStatus[EmberGPStatus["MATCH"] = 1] = "MATCH";
+    /** Drop Frame */
+    EmberGPStatus[EmberGPStatus["DROP_FRAME"] = 2] = "DROP_FRAME";
+    /** Frame Unprocessed */
+    EmberGPStatus[EmberGPStatus["UNPROCESSED"] = 3] = "UNPROCESSED";
+    /** Frame Pass Unprocessed */
+    EmberGPStatus[EmberGPStatus["PASS_UNPROCESSED"] = 4] = "PASS_UNPROCESSED";
+    /** Frame TX Then Drop */
+    EmberGPStatus[EmberGPStatus["TX_THEN_DROP"] = 5] = "TX_THEN_DROP";
+    /** No Security */
+    EmberGPStatus[EmberGPStatus["NO_SECURITY"] = 6] = "NO_SECURITY";
+    /** Security Failure */
+    EmberGPStatus[EmberGPStatus["AUTH_FAILURE"] = 7] = "AUTH_FAILURE";
+})(EmberGPStatus || (exports.EmberGPStatus = EmberGPStatus = {}));
 /** Type of Ember software version */
 var EmberVersionType;
 (function (EmberVersionType) {
@@ -1242,20 +932,6 @@ var EmberVersionType;
     // as the version type.
     EmberVersionType[EmberVersionType["GA"] = 170] = "GA";
 })(EmberVersionType || (exports.EmberVersionType = EmberVersionType = {}));
-;
-var EmberLeaveRequestFlags;
-(function (EmberLeaveRequestFlags) {
-    /** Leave and rejoin. */
-    EmberLeaveRequestFlags[EmberLeaveRequestFlags["AND_REJOIN"] = 128] = "AND_REJOIN";
-    // Note: removeChildren is treated to be deprecated and should not be used!
-    // CCB 2047
-    // - CCB makes the first step to deprecate the 'leave and remove children' functionality.
-    // - We were proactive here and deprecated it right away.
-    // AND_REMOVE_CHILDREN = 0x40,
-    /** Leave. */
-    EmberLeaveRequestFlags[EmberLeaveRequestFlags["WITHOUT_REJOIN"] = 0] = "WITHOUT_REJOIN";
-})(EmberLeaveRequestFlags || (exports.EmberLeaveRequestFlags = EmberLeaveRequestFlags = {}));
-;
 /**
  * For emberSetTxPowerMode and mfglibSetPower.
  * uint16_t
@@ -1299,7 +975,6 @@ var EmberKeepAliveMode;
     EmberKeepAliveMode[EmberKeepAliveMode["END_DEVICE_TIMEOUT_KEEP_ALIVE"] = 2] = "END_DEVICE_TIMEOUT_KEEP_ALIVE";
     EmberKeepAliveMode[EmberKeepAliveMode["KEEP_ALIVE_SUPPORT_ALL"] = 3] = "KEEP_ALIVE_SUPPORT_ALL";
 })(EmberKeepAliveMode || (exports.EmberKeepAliveMode = EmberKeepAliveMode = {}));
-;
 /** This is the Extended Security Bitmask that controls the use of various extended security features. */
 var EmberExtendedSecurityBitmask;
 (function (EmberExtendedSecurityBitmask) {
@@ -1340,7 +1015,6 @@ var EmberExtendedSecurityBitmask;
     EmberExtendedSecurityBitmask[EmberExtendedSecurityBitmask["ZDO_LEAVE_FROM_NON_PARENT_NOT_ALLOWED"] = 4096] = "ZDO_LEAVE_FROM_NON_PARENT_NOT_ALLOWED";
     // Bits 13-15 are unused.
 })(EmberExtendedSecurityBitmask || (exports.EmberExtendedSecurityBitmask = EmberExtendedSecurityBitmask = {}));
-;
 /** This is the Initial Security Bitmask that controls the use of various security features. */
 var EmberInitialSecurityBitmask;
 (function (EmberInitialSecurityBitmask) {
@@ -1360,13 +1034,13 @@ var EmberInitialSecurityBitmask;
      * Normally this bit is NOT set and the EUI64 of the trust center is learned during the join process.
      * When commissioning a device to join onto an existing network that is using a trust center and without sending any messages,
      * this bit must be set and the field ::EmberInitialSecurityState::preconfiguredTrustCenterEui64 must be populated with the appropriate EUI64.
-    */
+     */
     EmberInitialSecurityBitmask[EmberInitialSecurityBitmask["HAVE_TRUST_CENTER_EUI64"] = 64] = "HAVE_TRUST_CENTER_EUI64";
     /**
      * This denotes that the ::EmberInitialSecurityState::preconfiguredKey is not the actual Link Key but a Root Key known only to the Trust Center.
      * It is hashed with the IEEE Address of the destination device to create the actual Link Key used in encryption.
      * This is bit is only used by the Trust Center. The joining device need not set this.
-    */
+     */
     EmberInitialSecurityBitmask[EmberInitialSecurityBitmask["TRUST_CENTER_USES_HASHED_LINK_KEY"] = 132] = "TRUST_CENTER_USES_HASHED_LINK_KEY";
     /**
      * This denotes that the ::EmberInitialSecurityState::preconfiguredKey element has valid data that should be used to configure
@@ -1424,7 +1098,6 @@ var EmberEventUnits;
     /** The event is scheduled to run at the earliest opportunity. */
     EmberEventUnits[EmberEventUnits["ZERO_DELAY"] = 4] = "ZERO_DELAY";
 })(EmberEventUnits || (exports.EmberEventUnits = EmberEventUnits = {}));
-;
 /**
  * Defines the events reported to the application by the ::emberCounterHandler().
  * Usage of the destinationNodeId or data fields found in the EmberCounterInfo or EmberExtraCounterInfo
@@ -1627,7 +1300,6 @@ var EmberCounterType;
     /** A placeholder giving the number of Ember counter types. */
     EmberCounterType[EmberCounterType["COUNT"] = 41] = "COUNT";
 })(EmberCounterType || (exports.EmberCounterType = EmberCounterType = {}));
-;
 /* eslint-disable @typescript-eslint/no-duplicate-enum-values */
 /** An enumerated list of library identifiers. */
 var EmberLibraryId;
@@ -1657,7 +1329,6 @@ var EmberLibraryId;
     EmberLibraryId[EmberLibraryId["NUMBER_OF_LIBRARIES"] = 21] = "NUMBER_OF_LIBRARIES";
     EmberLibraryId[EmberLibraryId["NULL"] = 255] = "NULL";
 })(EmberLibraryId || (exports.EmberLibraryId = EmberLibraryId = {}));
-;
 /** This indicates the presence, absence, or status of an Ember stack library. */
 var EmberLibraryStatus;
 (function (EmberLibraryStatus) {
@@ -1679,7 +1350,6 @@ var EmberLibraryStatus;
     EmberLibraryStatus[EmberLibraryStatus["PACKET_VALIDATE_LIBRARY_ENABLED"] = 1] = "PACKET_VALIDATE_LIBRARY_ENABLED";
     EmberLibraryStatus[EmberLibraryStatus["PACKET_VALIDATE_LIBRARY_ENABLE_MASK"] = 1] = "PACKET_VALIDATE_LIBRARY_ENABLE_MASK";
 })(EmberLibraryStatus || (exports.EmberLibraryStatus = EmberLibraryStatus = {}));
-;
 /* eslint-enable @typescript-eslint/no-duplicate-enum-values */
 /** Defines the entropy source used by the stack. */
 var EmberEntropySource;
@@ -1693,7 +1363,6 @@ var EmberEntropySource;
     /** Other mbed TLS entropy source. */
     EmberEntropySource[EmberEntropySource["MBEDTLS"] = 3] = "MBEDTLS";
 })(EmberEntropySource || (exports.EmberEntropySource = EmberEntropySource = {}));
-;
 /** Defines the options that should be used when initializing the node's network configuration. */
 var EmberNetworkInitBitmask;
 (function (EmberNetworkInitBitmask) {
@@ -1703,7 +1372,6 @@ var EmberNetworkInitBitmask;
     /** Z3 compliant end devices on a network must send a rejoin request on reboot. */
     EmberNetworkInitBitmask[EmberNetworkInitBitmask["END_DEVICE_REJOIN_ON_REBOOT"] = 2] = "END_DEVICE_REJOIN_ON_REBOOT";
 })(EmberNetworkInitBitmask || (exports.EmberNetworkInitBitmask = EmberNetworkInitBitmask = {}));
-;
 /** Defines the possible join states for a node. uint8_t */
 var EmberNetworkStatus;
 (function (EmberNetworkStatus) {
@@ -1722,7 +1390,6 @@ var EmberNetworkStatus;
     /** The node is in the process of leaving its current network. */
     EmberNetworkStatus[EmberNetworkStatus["LEAVING_NETWORK"] = 6] = "LEAVING_NETWORK";
 })(EmberNetworkStatus || (exports.EmberNetworkStatus = EmberNetworkStatus = {}));
-;
 /** Network scan types. */
 var EzspNetworkScanType;
 (function (EzspNetworkScanType) {
@@ -1731,7 +1398,6 @@ var EzspNetworkScanType;
     /** An active scan scans each channel for available networks. */
     EzspNetworkScanType[EzspNetworkScanType["ACTIVE_SCAN"] = 1] = "ACTIVE_SCAN";
 })(EzspNetworkScanType || (exports.EzspNetworkScanType = EzspNetworkScanType = {}));
-;
 /** The type of method used for joining. uint8_t */
 var EmberJoinMethod;
 (function (EmberJoinMethod) {
@@ -1750,12 +1416,12 @@ var EmberJoinMethod;
      */
     EmberJoinMethod[EmberJoinMethod["NWK_REJOIN"] = 1] = "NWK_REJOIN";
     /* For networks where the "permit joining" flag is never turned
-    * on, devices will need to use a NWK Rejoin.  If those devices have been
-    * preconfigured with the  NWK key (including sequence number), they can use
-    * a secured rejoin.  This is only necessary for end devices since they need
-    * a parent.  Routers can simply use the ::CONFIGURED_NWK_STATE
-    * join method below.
-    */
+     * on, devices will need to use a NWK Rejoin.  If those devices have been
+     * preconfigured with the  NWK key (including sequence number), they can use
+     * a secured rejoin.  This is only necessary for end devices since they need
+     * a parent.  Routers can simply use the ::CONFIGURED_NWK_STATE
+     * join method below.
+     */
     EmberJoinMethod[EmberJoinMethod["NWK_REJOIN_HAVE_NWK_KEY"] = 2] = "NWK_REJOIN_HAVE_NWK_KEY";
     /** For networks where all network and security information is known
          ahead of time, a router device may be commissioned such that it does
@@ -1785,7 +1451,6 @@ var EmberJoinMethod;
     */
     EmberJoinMethod[EmberJoinMethod["NWK_COMMISSIONING_REJOIN_HAVE_NWK_KEY"] = 6] = "NWK_COMMISSIONING_REJOIN_HAVE_NWK_KEY";
 })(EmberJoinMethod || (exports.EmberJoinMethod = EmberJoinMethod = {}));
-;
 /** Defines the possible types of nodes and the roles that a node might play in a network. */
 var EmberNodeType;
 (function (EmberNodeType) {
@@ -1804,7 +1469,6 @@ var EmberNodeType;
     /** Sleepy end device which duty cycles the radio Rx (CSL). */
     EmberNodeType[EmberNodeType["S2S_TARGET_DEVICE"] = 6] = "S2S_TARGET_DEVICE";
 })(EmberNodeType || (exports.EmberNodeType = EmberNodeType = {}));
-;
 /**  */
 var EmberMultiPhyNwkConfig;
 (function (EmberMultiPhyNwkConfig) {
@@ -1812,7 +1476,6 @@ var EmberMultiPhyNwkConfig;
     EmberMultiPhyNwkConfig[EmberMultiPhyNwkConfig["BROADCASTS_ENABLED"] = 2] = "BROADCASTS_ENABLED";
     EmberMultiPhyNwkConfig[EmberMultiPhyNwkConfig["DISABLED"] = 128] = "DISABLED";
 })(EmberMultiPhyNwkConfig || (exports.EmberMultiPhyNwkConfig = EmberMultiPhyNwkConfig = {}));
-;
 /**
  * Duty cycle states
  *
@@ -1832,7 +1495,6 @@ var EmberDutyCycleState;
     /** The suspend limit was reached and all outbound transmissions are blocked. */
     EmberDutyCycleState[EmberDutyCycleState["LBT_SUSPEND_LIMIT_REACHED"] = 4] = "LBT_SUSPEND_LIMIT_REACHED";
 })(EmberDutyCycleState || (exports.EmberDutyCycleState = EmberDutyCycleState = {}));
-;
 /** Defines binding types. uint8_t */
 var EmberBindingType;
 (function (EmberBindingType) {
@@ -1851,7 +1513,6 @@ var EmberBindingType;
      */
     EmberBindingType[EmberBindingType["MULTICAST_BINDING"] = 3] = "MULTICAST_BINDING";
 })(EmberBindingType || (exports.EmberBindingType = EmberBindingType = {}));
-;
 /** Defines the possible outgoing message types. uint8_t */
 var EmberOutgoingMessageType;
 (function (EmberOutgoingMessageType) {
@@ -1870,7 +1531,6 @@ var EmberOutgoingMessageType;
     /** A broadcast message. This value is passed to emberMessageSentHandler() only. It may not be passed to emberSendUnicast(). */
     EmberOutgoingMessageType[EmberOutgoingMessageType["BROADCAST"] = 6] = "BROADCAST";
 })(EmberOutgoingMessageType || (exports.EmberOutgoingMessageType = EmberOutgoingMessageType = {}));
-;
 /** Defines the possible incoming message types. uint8_t */
 var EmberIncomingMessageType;
 (function (EmberIncomingMessageType) {
@@ -1887,7 +1547,6 @@ var EmberIncomingMessageType;
     /** Broadcast sent by the local device. */
     EmberIncomingMessageType[EmberIncomingMessageType["BROADCAST_LOOPBACK"] = 5] = "BROADCAST_LOOPBACK";
 })(EmberIncomingMessageType || (exports.EmberIncomingMessageType = EmberIncomingMessageType = {}));
-;
 /**
  * Options to use when sending a message.
  *
@@ -1947,7 +1606,6 @@ var EmberApsOption;
      */
     EmberApsOption[EmberApsOption["FRAGMENT"] = 32768] = "FRAGMENT";
 })(EmberApsOption || (exports.EmberApsOption = EmberApsOption = {}));
-;
 /**
  * Types of source route discovery modes used by the concentrator.
  *
@@ -1966,7 +1624,6 @@ var EmberSourceRouteDiscoveryMode;
     /** reschedule */
     EmberSourceRouteDiscoveryMode[EmberSourceRouteDiscoveryMode["RESCHEDULE"] = 2] = "RESCHEDULE";
 })(EmberSourceRouteDiscoveryMode || (exports.EmberSourceRouteDiscoveryMode = EmberSourceRouteDiscoveryMode = {}));
-;
 /** The types of MAC passthrough messages that an application may receive. This is a bitmask. */
 var EmberMacPassthroughType;
 (function (EmberMacPassthroughType) {
@@ -1986,7 +1643,6 @@ var EmberMacPassthroughType;
     EmberMacPassthroughType[EmberMacPassthroughType["INTERNAL_ZLL"] = 128] = "INTERNAL_ZLL";
     EmberMacPassthroughType[EmberMacPassthroughType["INTERNAL_GP"] = 64] = "INTERNAL_GP";
 })(EmberMacPassthroughType || (exports.EmberMacPassthroughType = EmberMacPassthroughType = {}));
-;
 /**
  * Interpan Message type: unicast, broadcast, or multicast.
  * uint8_t
@@ -2017,7 +1673,6 @@ var EmberCurrentSecurityBitmask;
     EmberCurrentSecurityBitmask[EmberCurrentSecurityBitmask["TRUST_CENTER_USES_HASHED_LINK_KEY_"] = 132] = "TRUST_CENTER_USES_HASHED_LINK_KEY_";
     // Bits 1, 5, 6, and 8-15 reserved.
 })(EmberCurrentSecurityBitmask || (exports.EmberCurrentSecurityBitmask = EmberCurrentSecurityBitmask = {}));
-;
 /**
  * The list of supported key types used by Zigbee Security Manager.
  * uint8_t
@@ -2073,7 +1728,6 @@ var SecManKeyType;
      */
     SecManKeyType[SecManKeyType["INTERNAL"] = 9] = "INTERNAL";
 })(SecManKeyType || (exports.SecManKeyType = SecManKeyType = {}));
-;
 /**
  * Derived keys are calculated when performing Zigbee crypto operations. The stack makes use of these derivations.
  * Compounding derivations can be specified by using an or-equals on two derived types if applicable;
@@ -2095,7 +1749,6 @@ var SecManDerivedKeyType;
     /** For a TC using hashed link keys, hashed the root key against the supplied EUI in context. */
     SecManDerivedKeyType[SecManDerivedKeyType["TC_HASHED_LINK_KEY"] = 16] = "TC_HASHED_LINK_KEY";
 })(SecManDerivedKeyType || (exports.SecManDerivedKeyType = SecManDerivedKeyType = {}));
-;
 /**
  * Security Manager context flags.
  * uint8_t
@@ -2139,7 +1792,6 @@ var SecManFlag;
      */
     SecManFlag[SecManFlag["SYMMETRIC_PASSPHRASE"] = 16] = "SYMMETRIC_PASSPHRASE";
 })(SecManFlag || (exports.SecManFlag = SecManFlag = {}));
-;
 /** This denotes the status of an attempt to establish a key with another device. */
 var EmberKeyStatus;
 (function (EmberKeyStatus) {
@@ -2176,7 +1828,6 @@ var EmberKeyStatus;
     EmberKeyStatus[EmberKeyStatus["VERIFY_LINK_KEY_FAILURE"] = 100] = "VERIFY_LINK_KEY_FAILURE";
     EmberKeyStatus[EmberKeyStatus["VERIFY_LINK_KEY_SUCCESS"] = 101] = "VERIFY_LINK_KEY_SUCCESS";
 })(EmberKeyStatus || (exports.EmberKeyStatus = EmberKeyStatus = {}));
-;
 /** This bitmask describes the presence of fields within the ::EmberKeyStruct. uint16_t */
 var EmberKeyStructBitmask;
 (function (EmberKeyStructBitmask) {
@@ -2224,7 +1875,6 @@ var EmberKeyStructBitmask;
     /** This indicates that the device this key is being used to communicate with supports the APS frame counter synchronization procedure. */
     EmberKeyStructBitmask[EmberKeyStructBitmask["FC_SYNC_SUPPORTED"] = 2048] = "FC_SYNC_SUPPORTED";
 })(EmberKeyStructBitmask || (exports.EmberKeyStructBitmask = EmberKeyStructBitmask = {}));
-;
 /**
  * The Status of the Update Device message sent to the Trust Center.
  * The device may have joined or rejoined insecurely, rejoined securely, or left.
@@ -2239,7 +1889,6 @@ var EmberDeviceUpdate;
     EmberDeviceUpdate[EmberDeviceUpdate["DEVICE_LEFT"] = 2] = "DEVICE_LEFT";
     EmberDeviceUpdate[EmberDeviceUpdate["STANDARD_SECURITY_UNSECURED_REJOIN"] = 3] = "STANDARD_SECURITY_UNSECURED_REJOIN";
 })(EmberDeviceUpdate || (exports.EmberDeviceUpdate = EmberDeviceUpdate = {}));
-;
 /** The decision made by the Trust Center when a node attempts to join. uint8_t */
 var EmberJoinDecision;
 (function (EmberJoinDecision) {
@@ -2254,7 +1903,6 @@ var EmberJoinDecision;
     /** Allow rejoins only.*/
     EmberJoinDecision[EmberJoinDecision["ALLOW_REJOINS_ONLY"] = 4] = "ALLOW_REJOINS_ONLY";
 })(EmberJoinDecision || (exports.EmberJoinDecision = EmberJoinDecision = {}));
-;
 /** A bitmask indicating the state of the ZLL device. This maps directly to the ZLL information field in the scan response. uint16_t */
 var EmberZllState;
 (function (EmberZllState) {
@@ -2275,7 +1923,6 @@ var EmberZllState;
     /** Internal use: the ZLL token's key values point to a PSA key identifier */
     EmberZllState[EmberZllState["TOKEN_POINTS_TO_PSA_ID"] = 512] = "TOKEN_POINTS_TO_PSA_ID";
 })(EmberZllState || (exports.EmberZllState = EmberZllState = {}));
-;
 /** Differentiates among ZLL network operations. */
 var EzspZllNetworkOperation;
 (function (EzspZllNetworkOperation) {
@@ -2284,7 +1931,6 @@ var EzspZllNetworkOperation;
     /** ZLL join target command. */
     EzspZllNetworkOperation[EzspZllNetworkOperation["JOIN_TARGET"] = 1] = "JOIN_TARGET";
 })(EzspZllNetworkOperation || (exports.EzspZllNetworkOperation = EzspZllNetworkOperation = {}));
-;
 /** The key encryption algorithms supported by the stack. */
 var EmberZllKeyIndex;
 (function (EmberZllKeyIndex) {
@@ -2295,7 +1941,6 @@ var EmberZllKeyIndex;
     /** The key encryption algorithm for use during development and certification. */
     EmberZllKeyIndex[EmberZllKeyIndex["CERTIFICATION"] = 15] = "CERTIFICATION";
 })(EmberZllKeyIndex || (exports.EmberZllKeyIndex = EmberZllKeyIndex = {}));
-;
 /** uint8_t */
 var EmberGpApplicationId;
 (function (EmberGpApplicationId) {
@@ -2304,7 +1949,6 @@ var EmberGpApplicationId;
     /** IEEE address. */
     EmberGpApplicationId[EmberGpApplicationId["IEEE_ADDRESS"] = 2] = "IEEE_ADDRESS";
 })(EmberGpApplicationId || (exports.EmberGpApplicationId = EmberGpApplicationId = {}));
-;
 /** Green Power Security Level. uint8_t */
 var EmberGpSecurityLevel;
 (function (EmberGpSecurityLevel) {
@@ -2317,7 +1961,6 @@ var EmberGpSecurityLevel;
     /** 4 Byte Frame Counter and 4 Byte MIC with encryption */
     EmberGpSecurityLevel[EmberGpSecurityLevel["FC_MIC_ENCRYPTED"] = 3] = "FC_MIC_ENCRYPTED";
 })(EmberGpSecurityLevel || (exports.EmberGpSecurityLevel = EmberGpSecurityLevel = {}));
-;
 /** Green Power Security Security Key Type. uint8_t */
 var EmberGpKeyType;
 (function (EmberGpKeyType) {
@@ -2334,7 +1977,6 @@ var EmberGpKeyType;
     /** GP Security Key Type is GPD Derived Key */
     EmberGpKeyType[EmberGpKeyType["GPD_DERIVED"] = 7] = "GPD_DERIVED";
 })(EmberGpKeyType || (exports.EmberGpKeyType = EmberGpKeyType = {}));
-;
 /** uint8_t */
 var EmberGpProxyTableEntryStatus;
 (function (EmberGpProxyTableEntryStatus) {
@@ -2343,7 +1985,6 @@ var EmberGpProxyTableEntryStatus;
     /** The proxy table entry is not in use. */
     EmberGpProxyTableEntryStatus[EmberGpProxyTableEntryStatus["UNUSED"] = 255] = "UNUSED";
 })(EmberGpProxyTableEntryStatus || (exports.EmberGpProxyTableEntryStatus = EmberGpProxyTableEntryStatus = {}));
-;
 /** GP Sink Type. */
 var EmberGpSinkType;
 (function (EmberGpSinkType) {
@@ -2362,7 +2003,6 @@ var EmberGpSinkType;
     /** Unused sink type */
     EmberGpSinkType[EmberGpSinkType["UNUSED"] = 255] = "UNUSED";
 })(EmberGpSinkType || (exports.EmberGpSinkType = EmberGpSinkType = {}));
-;
 /** uint8_t */
 var EmberGpSinkTableEntryStatus;
 (function (EmberGpSinkTableEntryStatus) {
@@ -2371,5 +2011,27 @@ var EmberGpSinkTableEntryStatus;
     /** The proxy table entry is not in use. */
     EmberGpSinkTableEntryStatus[EmberGpSinkTableEntryStatus["UNUSED"] = 255] = "UNUSED";
 })(EmberGpSinkTableEntryStatus || (exports.EmberGpSinkTableEntryStatus = EmberGpSinkTableEntryStatus = {}));
-;
+var EmberLeaveNetworkOption;
+(function (EmberLeaveNetworkOption) {
+    /** Leave with no option. */
+    EmberLeaveNetworkOption[EmberLeaveNetworkOption["WITH_NO_OPTION"] = 0] = "WITH_NO_OPTION";
+    /** Leave with option rejoin. */
+    EmberLeaveNetworkOption[EmberLeaveNetworkOption["WITH_OPTION_REJOIN"] = 32] = "WITH_OPTION_REJOIN";
+    /** Leave is requested. */
+    EmberLeaveNetworkOption[EmberLeaveNetworkOption["IS_REQUESTED"] = 64] = "IS_REQUESTED";
+})(EmberLeaveNetworkOption || (exports.EmberLeaveNetworkOption = EmberLeaveNetworkOption = {}));
+/**
+ * Packet transmit priorities in terms of getting into the MAC queue.
+ *
+ * SL_802154_TRANSMIT_PRIORITY_HIGH High priority headers go on the front of the queue.
+ * SL_802154_TRANSMIT_PRIORITY_NORMAL  Normal priority headers go on the back of the queue.
+ * SL_802154_TRANSMIT_PRIORITY_SCAN_OKAY Normally, only beacon requests and orphan notifications can be sent during a scan.
+ * They are submitted with SCAN_OKAY and go on the front of the queue. Other packets could be submitted with this priority, but it is not recommended.
+ */
+var EmberTransmitPriority;
+(function (EmberTransmitPriority) {
+    EmberTransmitPriority[EmberTransmitPriority["HIGH"] = 0] = "HIGH";
+    EmberTransmitPriority[EmberTransmitPriority["NORMAL"] = 1] = "NORMAL";
+    EmberTransmitPriority[EmberTransmitPriority["SCAN_OKAY"] = 2] = "SCAN_OKAY";
+})(EmberTransmitPriority || (exports.EmberTransmitPriority = EmberTransmitPriority = {}));
 //# sourceMappingURL=enums.js.map