zigbee-herdsman-converters 25.84.0 → 25.86.0

package/dist/devices/onokom.js

@@ -69,7 +69,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -108,7 +108,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -181,8 +181,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -248,18 +248,6 @@ exports.definitions = [
                 description: "Mold protection",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
-            m.numeric({
-                name: "indoor_heat_exchanger_temperature",
-                cluster: "hvacThermostat",
-                attribute: { ID: 0x4740, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
-                access: "STATE",
-                valueMin: 0,
-                valueMax: 100,
-                valueStep: 1,
-                unit: "°C",
-                description: "Indoor heat exchanger temperature",
-                zigbeeCommandOptions: { manufacturerCode },
-            }),
             m.binary({
                 name: "screen_light",
                 cluster: "hvacThermostat",
@@ -277,7 +265,7 @@ exports.definitions = [
                 valueMin: 0,
                 valueMax: 100,
                 valueStep: 1,
-                description: "Current fan RPM",
+                description: "Current fan speed",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -340,7 +328,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -379,7 +367,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -452,8 +440,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -492,6 +480,15 @@ exports.definitions = [
                 description: "Turbo mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
+            m.binary({
+                name: "ionization",
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4720, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                description: "Ionization",
+                zigbeeCommandOptions: { manufacturerCode },
+            }),
             m.binary({
                 name: "screen_light",
                 cluster: "hvacThermostat",
@@ -515,9 +512,9 @@ exports.definitions = [
                 cluster: "hvacFanCtrl",
                 attribute: { ID: 0x4723, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 valueMin: 0,
-                valueMax: 100,
+                valueMax: 200,
                 valueStep: 1,
-                description: "Target fan rpm",
+                description: "Target fan speed",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -526,9 +523,9 @@ exports.definitions = [
                 attribute: { ID: 0x4724, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 access: "STATE",
                 valueMin: 0,
-                valueMax: 100,
+                valueMax: 200,
                 valueStep: 1,
-                description: "Current fan RPM",
+                description: "Current fan speed",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
         ],
@@ -570,7 +567,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -609,7 +606,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -682,8 +679,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -797,7 +794,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -836,7 +833,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -909,8 +906,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -1027,7 +1024,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -1035,7 +1032,7 @@ exports.definitions = [
                 cluster: "hvacThermostat",
                 attribute: "occupiedCoolingSetpoint",
                 valueMin: 16,
-                valueMax: 32,
+                valueMax: 30,
                 valueStep: 1,
                 scale: 100,
                 unit: "°C",
@@ -1066,7 +1063,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1139,8 +1136,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -1254,7 +1251,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -1293,7 +1290,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1366,8 +1363,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -1553,7 +1550,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -1592,7 +1589,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1626,8 +1623,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -1678,7 +1675,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -1717,9 +1714,18 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
+            m.numeric({
+                name: "outdoor_air_temperature",
+                cluster: "hvacThermostat",
+                attribute: "outdoorTemp",
+                scale: 100,
+                unit: "°C",
+                description: "Outdoor air temperature",
+                access: "STATE",
+            }),
             m.numeric({
                 name: "zb_fan_speed",
                 cluster: "hvacFanCtrl",
@@ -1734,9 +1740,9 @@ exports.definitions = [
                 cluster: "hvacThermostat",
                 attribute: { ID: 0x4701, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 valueMin: 0,
-                valueMax: 1,
+                valueMax: 7,
                 valueStep: 1,
-                description: "Vertical vanes: Stopped(0), Swing(1)",
+                description: "Vertical vanes: Stopped(0), Swing(1), Leftmost position(2), Rightmost position(7)",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1744,9 +1750,9 @@ exports.definitions = [
                 cluster: "hvacThermostat",
                 attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 valueMin: 0,
-                valueMax: 1,
+                valueMax: 7,
                 valueStep: 1,
-                description: "Horizontal vanes: Stopped(0), Swing(1)",
+                description: "Horizontal vanes: Stopped(0), Swing(1), Lowest postion(2), Highest position(7)",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1781,8 +1787,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -1803,6 +1809,15 @@ exports.definitions = [
                 description: "Quiet mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
+            m.binary({
+                name: "eco_mode",
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4727, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                description: "Eco mode",
+                zigbeeCommandOptions: { manufacturerCode },
+            }),
             m.binary({
                 name: "turbo_mode",
                 cluster: "hvacFanCtrl",
@@ -1812,6 +1827,33 @@ exports.definitions = [
                 description: "Turbo mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
+            m.binary({
+                name: "self_cleaning",
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4721, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                description: "Self cleaning",
+                zigbeeCommandOptions: { manufacturerCode },
+            }),
+            m.binary({
+                name: "heating_8_deg",
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4724, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                description: "Heating 8 deg",
+                zigbeeCommandOptions: { manufacturerCode },
+            }),
+            m.binary({
+                name: "gentle_wind",
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4725, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                description: "Gentle wind",
+                zigbeeCommandOptions: { manufacturerCode },
+            }),
             m.numeric({
                 name: "target_fan_rpm",
                 cluster: "hvacFanCtrl",
@@ -1819,7 +1861,7 @@ exports.definitions = [
                 valueMin: 0,
                 valueMax: 100,
                 valueStep: 1,
-                description: "Target fan rpm",
+                description: "Target fan speed",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
         ],
@@ -1861,7 +1903,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -1900,7 +1942,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1917,9 +1959,9 @@ exports.definitions = [
                 cluster: "hvacThermostat",
                 attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 valueMin: 0,
-                valueMax: 8,
+                valueMax: 1,
                 valueStep: 1,
-                description: "Horizontal vanes: Stopped(0), Swing(1), Lowest postion(2), Highest position(8)",
+                description: "Horizontal vanes: Stopped(0), Swing(1)",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -1954,8 +1996,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -2039,7 +2081,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -2078,7 +2120,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -2142,8 +2184,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -2203,7 +2245,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -2242,7 +2284,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -2315,8 +2357,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,
@@ -2433,33 +2475,9 @@ exports.definitions = [
                 attribute: { ID: 0x4724, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 access: "STATE",
                 valueMin: 0,
-                valueMax: 100,
-                valueStep: 1,
-                description: "Current fan RPM",
-                zigbeeCommandOptions: { manufacturerCode },
-            }),
-            m.numeric({
-                name: "indoor_heat_exchanger_temperature",
-                cluster: "hvacThermostat",
-                attribute: { ID: 0x4740, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
-                access: "STATE",
-                valueMin: 0,
-                valueMax: 100,
-                valueStep: 1,
-                unit: "°C",
-                description: "Indoor heat exchanger temperature",
-                zigbeeCommandOptions: { manufacturerCode },
-            }),
-            m.numeric({
-                name: "outdoor_heat_exchanger_temperature",
-                cluster: "hvacThermostat",
-                attribute: { ID: 0x4741, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
-                access: "STATE",
-                valueMin: 0,
-                valueMax: 100,
+                valueMax: 200,
                 valueStep: 1,
-                unit: "°C",
-                description: "Outdoor heat exchanger temperature",
+                description: "Current fan speed",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -2511,7 +2529,7 @@ exports.definitions = [
                 attribute: "localTemp",
                 scale: 100,
                 unit: "°C",
-                description: "Current temperature",
+                description: "Indoor air temperature",
                 access: "STATE",
             }),
             m.numeric({
@@ -2550,7 +2568,7 @@ exports.definitions = [
                     dry: 4,
                     fan_only: 5,
                 },
-                description: "Modes",
+                description: "Mode",
                 zigbeeCommandOptions: { manufacturerCode },
             }),
             m.numeric({
@@ -2614,8 +2632,8 @@ exports.definitions = [
             }),
             m.enumLookup({
                 name: "status_led",
-                cluster: "genOnOff",
-                attribute: { ID: 0x4700, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
+                cluster: "hvacThermostat",
+                attribute: { ID: 0x4704, type: zigbee_herdsman_1.Zcl.DataType.ENUM8 },
                 lookup: {
                     normal_mode: 0,
                     disabled_if_no_errors: 1,