zigbee-herdsman-converters 25.15.0 → 25.17.0

package/dist/converters/fromZigbee.js

@@ -32,13 +32,17 @@ var __importStar = (this && this.__importStar) || (function () {
         return result;
     };
 })();
+var __importDefault = (this && this.__importDefault) || function (mod) {
+    return (mod && mod.__esModule) ? mod : { "default": mod };
+};
 Object.defineProperty(exports, "__esModule", { value: true });
 exports.ias_sos_alarm_2 = exports.ias_carbon_monoxide_alarm_1_gas_alarm_2 = exports.ias_carbon_monoxide_alarm_1 = exports.ias_contact_alarm_1_report = exports.ias_contact_alarm_1 = exports.ias_smoke_alarm_1 = exports.ias_gas_alarm_2 = exports.ias_gas_alarm_1 = exports.ias_vibration_alarm_1_with_timeout = exports.ias_vibration_alarm_1 = exports.ias_water_leak_alarm_1_report = exports.ias_water_leak_alarm_1 = exports.ias_siren = exports.ias_no_alarm = exports.power_on_behavior = exports.on_off_skip_duplicate_transaction = exports.on_off_force_multiendpoint = exports.on_off = exports.gas_metering = exports.electrical_measurement = exports.metering = exports.meter_identification = exports.color_colortemp = exports.level_config = exports.brightness = exports.occupancy_timeout = exports.occupancy_with_timeout = exports.occupancy = exports.co2 = exports.pressure = exports.soil_moisture = exports.flow = exports.pm25 = exports.humidity = exports.device_temperature = exports.temperature = exports.battery = exports.linkquality_from_basic = exports.lock_user_status_response = exports.lock_pin_code_response = exports.lock_set_pin_code_response = exports.lock = exports.lock_programming_event_read_pincode = exports.lock_programming_event = exports.lock_operation_event = exports.hvac_user_interface = exports.thermostat_weekly_schedule = exports.thermostat = exports.fan_speed = exports.fan = void 0;
 exports.ias_smoke_alarm_1_develco = exports.elko_thermostat = exports.namron_hvac_user_interface = exports.namron_thermostat = exports.power_source = exports.ias_wd = exports.ias_enroll = exports.checkin_presence = exports.lighting_ballast_configuration = exports.curtain_position_analog_output = exports.cover_state_via_onoff = exports.cover_position_via_brightness = exports.cover_position_tilt = exports.identify = exports.command_off_state = exports.command_on_state = exports.command_emergency = exports.command_move_to_hue = exports.command_move_to_saturation = exports.command_move_hue = exports.command_move_to_color = exports.command_move_to_color_temp = exports.command_color_loop_set = exports.command_step_saturation = exports.command_step_hue = exports.command_move_to_hue_and_saturation = exports.command_enhanced_move_to_hue_and_saturation = exports.command_step_color_temperature = exports.command_move_color_temperature = exports.command_stop = exports.command_step = exports.command_move = exports.command_move_to_level = exports.command_toggle = exports.command_off_with_effect = exports.command_off = exports.command_on = exports.command_cover_close = exports.command_cover_open = exports.command_cover_stop = exports.command_arm = exports.command_panic = exports.command_recall = exports.command_store = exports.ias_occupancy_alarm_1_with_timeout = exports.ias_occupancy_only_alarm_2 = exports.ias_alarm_only_alarm_1 = exports.ias_occupancy_alarm_2 = exports.ias_occupancy_alarm_1_report = exports.ias_occupancy_alarm_1 = void 0;
-exports.K4003C_binary_input = exports.diyruz_rspm = exports.diyruz_contact = exports.ewelink_action = exports.restorable_brightness = exports.tint404011_move_to_color_temp = exports.tint_scene = exports.orvibo_raw_2 = exports.orvibo_raw_1 = exports.danfoss_icon_hvac_user_interface = exports.danfoss_icon_regulator = exports.danfoss_icon_battery = exports.danfoss_icon_floor_sensor = exports.danfoss_thermostat_setpoint_scheduled = exports.danfoss_thermostat = exports.meazon_meter = exports.heiman_ir_remote = exports.plaid_battery = exports.keypad20_battery = exports.keypad20states = exports.ptvo_switch_analog_input = exports.ptvo_switch_uart = exports.livolo_switch_state_raw = exports.easycodetouch_action = exports.easycode_action = exports.livolo_pir_state = exports.livolo_illuminance_state = exports.livolo_hygrometer_state = exports.livolo_cover_state = exports.livolo_dimmer_state = exports.livolo_curtain_switch_state = exports.livolo_new_switch_state_4gang = exports.livolo_new_switch_state_2gang = exports.livolo_new_switch_state = exports.livolo_socket_state = exports.livolo_switch_state = exports.tuya_switch_scene = exports.WSZ01_on_off_action = exports.tuya_cover_options = exports.tuya_cover_options_2 = exports.ts0216_siren = exports.terncy_temperature = exports.terncy_contact = exports.ZigUP = exports.DTB190502A1 = exports.terncy_knob = exports.tuya_doorbell_button = exports.wiser_device_info = exports.tuya_led_controller = exports.ts0201_temperature_humidity_alarm = void 0;
-exports.diyruz_zintercom_config = exports.diyruz_airsense_config_hum = exports.diyruz_airsense_config_pres = exports.diyruz_airsense_config_temp = exports.diyruz_airsense_config_co2 = exports.diyruz_geiger_config = exports.diyruz_geiger = exports.diyruz_freepad_config = exports.javis_lock_report = exports.heiman_scenes = exports.STS_PRS_251_presence = exports.PGC410EU_presence = exports.ZMCSW032D_cover_position = exports.SAGE206612_state = exports.almond_click = exports.color_stop_raw = exports.adeo_button_65024 = exports.scenes_recall_scene_65024 = exports.heiman_air_quality = exports.heiman_hcho = exports.U02I007C01_water_leak = exports.U02I007C01_contact = exports.keen_home_smart_vent_pressure = exports.qlwz_letv8key_switch = exports.konke_action = exports.ptvo_multistate_action = exports.command_status_change_notification_action = exports.W2_module_carbon_monoxide = exports.legrand_greenpower = exports.legrand_power_alarm = exports.legrand_pilot_wire_mode = exports.legrand_master_switch_center = exports.legrand_scenes = exports.bticino_4027C_binary_input_moving = exports.legrand_binary_input_on_off = exports.legrand_binary_input_moving = exports.hue_smart_button_event = exports.byun_gas_true = exports.byun_gas_false = exports.byun_smoke_true = exports.byun_smoke_false = exports.smartthings_acceleration = exports._3310_humidity = exports.kmpcil_res005_on_off = exports.kmpcil_res005_occupancy = exports.diyruz_freepad_clicks = exports._8840100H_water_leak_alarm = exports.enocean_ptm216z = exports.enocean_ptm215ze = exports.enocean_ptm215z = void 0;
+exports.diyruz_rspm = exports.diyruz_contact = exports.ewelink_action = exports.restorable_brightness = exports.tint404011_move_to_color_temp = exports.tint_scene = exports.orvibo_raw_2 = exports.orvibo_raw_1 = exports.danfoss_icon_hvac_user_interface = exports.danfoss_icon_regulator = exports.danfoss_icon_battery = exports.danfoss_icon_floor_sensor = exports.danfoss_thermostat_setpoint_scheduled = exports.danfoss_hvac_ui = exports.danfoss_thermostat = exports.meazon_meter = exports.heiman_ir_remote = exports.plaid_battery = exports.keypad20_battery = exports.keypad20states = exports.ptvo_switch_analog_input = exports.ptvo_switch_uart = exports.livolo_switch_state_raw = exports.easycodetouch_action = exports.easycode_action = exports.livolo_pir_state = exports.livolo_illuminance_state = exports.livolo_hygrometer_state = exports.livolo_cover_state = exports.livolo_dimmer_state = exports.livolo_curtain_switch_state = exports.livolo_new_switch_state_4gang = exports.livolo_new_switch_state_2gang = exports.livolo_new_switch_state = exports.livolo_socket_state = exports.livolo_switch_state = exports.tuya_switch_scene = exports.WSZ01_on_off_action = exports.tuya_cover_options = exports.tuya_cover_options_2 = exports.ts0216_siren = exports.terncy_temperature = exports.terncy_contact = exports.ZigUP = exports.DTB190502A1 = exports.terncy_knob = exports.tuya_doorbell_button = exports.wiser_device_info = exports.tuya_led_controller = exports.ts0201_temperature_humidity_alarm = void 0;
+exports.diyruz_zintercom_config = exports.diyruz_airsense_config_hum = exports.diyruz_airsense_config_pres = exports.diyruz_airsense_config_temp = exports.diyruz_airsense_config_co2 = exports.diyruz_geiger_config = exports.diyruz_geiger = exports.diyruz_freepad_config = exports.javis_lock_report = exports.heiman_scenes = exports.STS_PRS_251_presence = exports.PGC410EU_presence = exports.ZMCSW032D_cover_position = exports.SAGE206612_state = exports.almond_click = exports.color_stop_raw = exports.adeo_button_65024 = exports.scenes_recall_scene_65024 = exports.heiman_air_quality = exports.heiman_hcho = exports.U02I007C01_water_leak = exports.U02I007C01_contact = exports.keen_home_smart_vent_pressure = exports.qlwz_letv8key_switch = exports.konke_action = exports.ptvo_multistate_action = exports.command_status_change_notification_action = exports.W2_module_carbon_monoxide = exports.legrand_greenpower = exports.legrand_power_alarm = exports.legrand_pilot_wire_mode = exports.legrand_master_switch_center = exports.legrand_scenes = exports.bticino_4027C_binary_input_moving = exports.legrand_binary_input_on_off = exports.legrand_binary_input_moving = exports.hue_smart_button_event = exports.byun_gas_true = exports.byun_gas_false = exports.byun_smoke_true = exports.byun_smoke_false = exports.smartthings_acceleration = exports._3310_humidity = exports.kmpcil_res005_on_off = exports.kmpcil_res005_occupancy = exports.diyruz_freepad_clicks = exports.enocean_ptm216z = exports.enocean_ptm215ze = exports.enocean_ptm215z = exports.K4003C_binary_input = void 0;
 exports.ignore_analog_report = exports.ignore_pressure_report = exports.ignore_humidity_report = exports.ignore_temperature_report = exports.ignore_occupancy_report = exports.ignore_illuminance_report = exports.ignore_basic_report = exports.ignore_onoff_report = exports.awox_refresh = exports.awox_refreshColored = exports.awox_colors = exports.SNZB02_humidity = exports.SNZB02_temperature = exports.hw_version = exports.led_on_motion = exports.tuya_multi_action = exports.command_stop_move_raw = exports.sunricher_switch2801K4 = exports.sunricher_switch2801K2 = exports.tuya_operation_mode = exports.sihas_action = exports.sihas_people_cnt = exports.heiman_doorbell_button = exports.rc_110_level_to_scene = exports.wiser_smart_setpoint_command_client = exports.wiser_smart_thermostat_client = exports.schneider_temperature = exports.schneider_ui_action = exports.schneider_pilot_mode = exports.idlock_fw = exports.idlock = exports.ZB003X_occupancy = exports.ZB003X_attr = exports.itcmdr_clicks = exports.ias_keypad = exports.tuya_relay_din_led_indicator = exports.hue_twilight = exports.hue_tap = exports.hue_dimmer_switch = exports.hue_wall_switch = exports.CCTSwitch_D0001_lighting = exports.CCTSwitch_D0001_levelctrl = exports.hue_wall_switch_device_mode = exports.hue_motion_led_indication = exports.hue_motion_sensitivity = exports.DNCKAT_S00X_buttons = exports.KAMI_occupancy = exports.KAMI_contact = exports.CC2530ROUTER_meta = exports.CC2530ROUTER_led = void 0;
 exports.TS110E_switch_type = exports.TS110E_light_type = exports.TS110E = exports.wiser_smart_thermostat = exports.wiser_lighting_ballast_configuration = exports.schneider_lighting_ballast_configuration = exports.ZM35HQ_attr = exports.terncy_raw = exports.eurotronic_thermostat = exports.viessmann_thermostat = exports.stelpro_thermostat = exports.SP600_power = exports.ias_ace_occupancy_with_timeout = exports.command_on_presence = exports.EKO09738_metering = exports.metering_datek = exports.command_arm_with_transaction = exports.ignore_electrical_measurement = exports.ignore_metering = exports.ignore_tuya_raw = exports.ignore_tuya_set_time = exports.ignore_time_read = exports.ignore_zclversion_read = exports.ignore_haDiagnostic = exports.ignore_genOta = exports.ignore_genLevelCtrl_report = exports.ignore_poll_ctrl = exports.ignore_command_stop = exports.ignore_command_step = exports.ignore_command_off_with_effect = exports.ignore_command_off = exports.ignore_command_on = exports.ignore_genIdentify = exports.ignore_iasace_commandgetpanelstatus = exports.ignore_iaszone_report = exports.ignore_iaszone_statuschange = exports.ignore_iaszone_attreport = exports.ignore_thermostat_report = exports.ignore_closuresWindowCovering_report = exports.ignore_light_color_colortemp_report = exports.ignore_light_brightness_report = exports.ignore_power_report = exports.ignore_multistate_report = void 0;
+const node_assert_1 = __importDefault(require("node:assert"));
 const libColor = __importStar(require("../lib/color"));
 const constants = __importStar(require("../lib/constants"));
 const exposes = __importStar(require("../lib/exposes"));
@@ -402,9 +406,6 @@ exports.lock_user_status_response = {
         const userId = data.userid.toString();
         const result = { users: {} };
         result.users[userId] = { status: status };
-        if (options?.expose_pin && data.pincodevalue) {
-            result.users[userId].pin_code = data.pincodevalue;
-        }
         return result;
     },
 };
@@ -462,7 +463,7 @@ exports.temperature = {
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
         if (msg.data.measuredValue !== undefined) {
-            const temperature = Number.parseFloat(msg.data.measuredValue) / 100.0;
+            const temperature = msg.data.measuredValue / 100.0;
             const property = (0, utils_1.postfixWithEndpointName)("temperature", msg, model, meta);
             return { [property]: temperature };
         }
@@ -473,7 +474,7 @@ exports.device_temperature = {
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
         if (msg.data.currentTemperature !== undefined) {
-            const value = Number.parseInt(msg.data.currentTemperature, 10);
+            const value = msg.data.currentTemperature;
             return { device_temperature: value };
         }
     },
@@ -482,7 +483,7 @@ exports.humidity = {
     cluster: "msRelativeHumidity",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const humidity = Number.parseFloat(msg.data.measuredValue) / 100.0;
+        const humidity = msg.data.measuredValue / 100.0;
         const property = (0, utils_1.postfixWithEndpointName)("humidity", msg, model, meta);
         // https://github.com/Koenkk/zigbee2mqtt/issues/798
         // Sometimes the sensor publishes non-realistic vales, it should only publish message
@@ -505,7 +506,7 @@ exports.flow = {
     cluster: "msFlowMeasurement",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const flow = Number.parseFloat(msg.data.measuredValue) / 10.0;
+        const flow = msg.data.measuredValue / 10.0;
         const property = (0, utils_1.postfixWithEndpointName)("flow", msg, model, meta);
         if (msg.data.measuredValue !== undefined) {
             return { [property]: flow };
@@ -516,7 +517,7 @@ exports.soil_moisture = {
     cluster: "msSoilMoisture",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const soilMoisture = Number.parseFloat(msg.data.measuredValue) / 100.0;
+        const soilMoisture = msg.data.measuredValue / 100.0;
         return { soil_moisture: soilMoisture };
     },
 };
@@ -530,7 +531,7 @@ exports.pressure = {
             pressure = msg.data.scaledValue / 10 ** scale / 100.0; // convert to hPa
         }
         else {
-            pressure = Number.parseFloat(msg.data.measuredValue);
+            pressure = msg.data.measuredValue;
         }
         return { pressure };
     },
@@ -944,7 +945,7 @@ exports.ias_no_alarm = {
     cluster: "ssIasZone",
     type: ["attributeReport", "commandStatusChangeNotification"],
     convert: (model, msg, publish, options, meta) => {
-        const zoneStatus = msg.data.zoneStatus ?? msg.data.zonestatus;
+        const zoneStatus = "zonestatus" in msg.data ? msg.data.zonestatus : msg.data.zoneStatus;
         if (zoneStatus !== undefined) {
             return {
                 tamper: (zoneStatus & (1 << 2)) > 0,
@@ -1060,7 +1061,7 @@ exports.ias_smoke_alarm_1 = {
     cluster: "ssIasZone",
     type: ["commandStatusChangeNotification", "attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const zoneStatus = msg.type === "commandStatusChangeNotification" ? msg.data.zonestatus : msg.data.zoneStatus;
+        const zoneStatus = "zonestatus" in msg.data ? msg.data.zonestatus : msg.data.zoneStatus;
         return {
             smoke: (zoneStatus & 1) > 0,
             tamper: (zoneStatus & (1 << 2)) > 0,
@@ -1119,16 +1120,16 @@ exports.ias_carbon_monoxide_alarm_1_gas_alarm_2 = {
     cluster: "ssIasZone",
     type: "commandStatusChangeNotification",
     convert: (model, msg, publish, options, meta) => {
-        const { zoneStatus } = msg.data;
+        const { zonestatus } = msg.data;
         return {
-            carbon_monoxide: (zoneStatus & 1) > 0,
-            gas: (zoneStatus & (1 << 1)) > 0,
-            tamper: (zoneStatus & (1 << 2)) > 0,
-            battery_low: (zoneStatus & (1 << 3)) > 0,
-            trouble: (zoneStatus & (1 << 6)) > 0,
-            ac_connected: !((zoneStatus & (1 << 7)) > 0),
-            test: (zoneStatus & (1 << 8)) > 0,
-            battery_defect: (zoneStatus & (1 << 9)) > 0,
+            carbon_monoxide: (zonestatus & 1) > 0,
+            gas: (zonestatus & (1 << 1)) > 0,
+            tamper: (zonestatus & (1 << 2)) > 0,
+            battery_low: (zonestatus & (1 << 3)) > 0,
+            trouble: (zonestatus & (1 << 6)) > 0,
+            ac_connected: !((zonestatus & (1 << 7)) > 0),
+            test: (zonestatus & (1 << 8)) > 0,
+            battery_defect: (zonestatus & (1 << 9)) > 0,
         };
     },
 };
@@ -1158,7 +1159,7 @@ exports.ias_occupancy_alarm_1 = {
 };
 exports.ias_occupancy_alarm_1_report = {
     cluster: "ssIasZone",
-    type: "attributeReport",
+    type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
         const zoneStatus = msg.data.zoneStatus;
         if (zoneStatus !== undefined) {
@@ -2145,16 +2146,17 @@ exports.wiser_device_info = {
             // TODO What is ALG
             const alg = data.slice(1);
             result.ALG = alg.join(",");
-            result.occupied_heating_setpoint = alg[2] / 10;
-            result.local_temperature = alg[3] / 10;
+            result.occupied_heating_setpoint = Number.parseInt(alg[2], 10) / 10;
+            result.local_temperature = Number.parseInt(alg[3], 10) / 10;
             result.pi_heating_demand = Number.parseInt(alg[9], 10);
         }
         else if (data[0] === "ADC") {
             // TODO What is ADC
             const adc = data.slice(1);
             result.ADC = adc.join(",");
-            result.occupied_heating_setpoint = adc[5] / 100;
-            result.local_temperature = adc[3] / 10;
+            // TODO: should parseInt?
+            result.occupied_heating_setpoint = Number.parseInt(adc[5], 10) / 100;
+            result.local_temperature = Number.parseInt(adc[3], 10) / 10;
         }
         else if (data[0] === "UI") {
             if (data[1] === "BoostUp") {
@@ -2231,7 +2233,7 @@ exports.ZigUP = {
         let ds18b20Value = null;
         if (msg.data["41368"]) {
             ds18b20Id = msg.data["41368"].split(":")[0];
-            ds18b20Value = (0, utils_1.precisionRound)(msg.data["41368"].split(":")[1], 2);
+            ds18b20Value = (0, utils_1.precisionRound)(Number.parseFloat(msg.data["41368"].split(":")[1]), 2);
         }
         return {
             state: msg.data.onOff === 1 ? "ON" : "OFF",
@@ -2257,7 +2259,7 @@ exports.terncy_temperature = {
     cluster: "msTemperatureMeasurement",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const temperature = Number.parseFloat(msg.data.measuredValue) / 10.0;
+        const temperature = msg.data.measuredValue / 10.0;
         return { temperature: temperature };
     },
 };
@@ -2283,7 +2285,7 @@ exports.tuya_cover_options_2 = {
     convert: (model, msg, publish, options, meta) => {
         const result = {};
         if (msg.data.moesCalibrationTime !== undefined) {
-            const value = Number.parseFloat(msg.data.moesCalibrationTime) / 100;
+            const value = msg.data.moesCalibrationTime / 100;
             result[(0, utils_1.postfixWithEndpointName)("calibration_time", msg, model, meta)] = value;
         }
         if (msg.data.tuyaMotorReversal !== undefined) {
@@ -2315,7 +2317,7 @@ exports.tuya_cover_options = {
             result[(0, utils_1.postfixWithEndpointName)("motor_reversal", msg, model, meta)] = reversalLookup[value];
         }
         if (msg.data.moesCalibrationTime !== undefined) {
-            const value = Number.parseFloat(msg.data.moesCalibrationTime) / 10.0;
+            const value = msg.data.moesCalibrationTime / 10.0;
             if (["_TZ3000_cet6ch1r", "_TZ3000_5iixzdo7"].includes(meta.device.manufacturerName)) {
                 const endpoint = msg.endpoint.ID;
                 const calibrationLookup = { 1: "to_open", 2: "to_close" };
@@ -2704,12 +2706,10 @@ exports.ptvo_switch_uart = {
     cluster: "genMultistateValue",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        let data = msg.data.stateText;
-        if (typeof data === "object") {
+        let data = msg.data.stateText; // ZclArray is only for write
+        if (Array.isArray(data)) {
             let bHex = false;
-            // biome-ignore lint/suspicious/noImplicitAnyLet: ignored using `--suppress`
             let code;
-            // biome-ignore lint/suspicious/noImplicitAnyLet: ignored using `--suppress`
             let index;
             for (index = 0; index < data.length; index += 1) {
                 code = data[index];
@@ -2719,7 +2719,7 @@ exports.ptvo_switch_uart = {
                 }
             }
             if (!bHex) {
-                data = data.toString("latin1");
+                data = data.toString();
             }
             else {
                 data = [...data];
@@ -2838,8 +2838,10 @@ exports.heiman_ir_remote = {
     cluster: "heimanSpecificInfraRedRemote",
     type: ["commandStudyKeyRsp", "commandCreateIdRsp", "commandGetIdAndKeyCodeListRsp"],
     convert: (model, msg, publish, options, meta) => {
+        // TODO: split converter for each cmd?
         switch (msg.type) {
             case "commandStudyKeyRsp":
+                (0, node_assert_1.default)("keyCode" in msg.data);
                 return {
                     action: "learn",
                     action_result: msg.data.result === 1 ? "success" : "error",
@@ -2847,6 +2849,7 @@ exports.heiman_ir_remote = {
                     action_id: msg.data.result === 1 ? msg.data.id : undefined,
                 };
             case "commandCreateIdRsp":
+                (0, node_assert_1.default)("modelType" in msg.data);
                 return {
                     action: "create",
                     action_result: msg.data.id === 0xff ? "error" : "success",
@@ -2854,6 +2857,7 @@ exports.heiman_ir_remote = {
                     action_id: msg.data.id !== 0xff ? msg.data.id : undefined,
                 };
             case "commandGetIdAndKeyCodeListRsp": {
+                (0, node_assert_1.default)("packetNumber" in msg.data);
                 // See cluster.js with data format description
                 if (msg.data.packetNumber === 1) {
                     // start to collect and merge list
@@ -2984,9 +2988,6 @@ exports.danfoss_thermostat = {
         if (msg.data.danfossRadiatorCovered !== undefined) {
             result[(0, utils_1.postfixWithEndpointName)("radiator_covered", msg, model, meta)] = msg.data.danfossRadiatorCovered === 1;
         }
-        if (msg.data.danfossViewingDirection !== undefined) {
-            result[(0, utils_1.postfixWithEndpointName)("viewing_direction", msg, model, meta)] = msg.data.danfossViewingDirection === 1;
-        }
         if (msg.data.danfossAlgorithmScaleFactor !== undefined) {
             result[(0, utils_1.postfixWithEndpointName)("algorithm_scale_factor", msg, model, meta)] = msg.data.danfossAlgorithmScaleFactor;
         }
@@ -3049,6 +3050,17 @@ exports.danfoss_thermostat = {
         return result;
     },
 };
+exports.danfoss_hvac_ui = {
+    cluster: "hvacUserInterfaceCfg",
+    type: ["attributeReport", "readResponse"],
+    convert: (model, msg, publish, options, meta) => {
+        const result = {};
+        if (msg.data.danfossViewingDirection !== undefined) {
+            result[(0, utils_1.postfixWithEndpointName)("viewing_direction", msg, model, meta)] = msg.data.danfossViewingDirection === 1;
+        }
+        return result;
+    },
+};
 exports.danfoss_thermostat_setpoint_scheduled = {
     cluster: "hvacThermostat",
     type: ["attributeReport", "readResponse"],
@@ -3132,11 +3144,11 @@ exports.danfoss_icon_regulator = {
                     ? constants.danfossSystemStatusCode[msg.data.danfossSystemStatusCode]
                     : msg.data.danfossSystemStatusCode;
         }
-        if (msg.data.danfossHeatsupplyRequest !== undefined) {
+        if (msg.data.danfossHeatSupplyRequest !== undefined) {
             result[(0, utils_1.postfixWithEndpointName)("heat_supply_request", msg, model, meta)] =
-                constants.danfossHeatsupplyRequest[msg.data.danfossHeatsupplyRequest] !== undefined
-                    ? constants.danfossHeatsupplyRequest[msg.data.danfossHeatsupplyRequest]
-                    : msg.data.danfossHeatsupplyRequest;
+                constants.danfossHeatsupplyRequest[msg.data.danfossHeatSupplyRequest] !== undefined
+                    ? constants.danfossHeatsupplyRequest[msg.data.danfossHeatSupplyRequest]
+                    : msg.data.danfossHeatSupplyRequest;
         }
         if (msg.data.danfossSystemStatusWater !== undefined) {
             result[(0, utils_1.postfixWithEndpointName)("system_status_water", msg, model, meta)] =
@@ -3454,7 +3466,7 @@ exports.enocean_ptm216z = {
             "106_0": "release",
             "104_": "short_press_2_of_2",
         };
-        const ID = `${commandID}_${msg.data.commandFrame.raw?.slice(0, 1).join("_") ?? ""}`;
+        const ID = `${commandID}_${("raw" in msg.data.commandFrame && msg.data.commandFrame.raw?.slice(0, 1).join("_")) ?? ""}`;
         if (lookup[ID] === undefined) {
             logger_1.logger.error(`PTM 216Z: missing command '${ID}'`, NS);
         }
@@ -3463,17 +3475,16 @@ exports.enocean_ptm216z = {
         }
     },
 };
-// biome-ignore lint/style/useNamingConvention: ignored using `--suppress`
-exports._8840100H_water_leak_alarm = {
-    cluster: "haApplianceEventsAlerts",
-    type: "commandAlertsNotification",
-    convert: (model, msg, publish, options, meta) => {
-        const alertStatus = msg.data.aalert;
-        return {
-            water_leak: (alertStatus & (1 << 12)) > 0,
-        };
-    },
-};
+// export const _8840100H_water_leak_alarm: Fz.Converter = {
+//     cluster: "haApplianceEventsAlerts",
+//     type: "commandAlertsNotification",
+//     convert: (model, msg, publish, options, meta) => {
+//         const alertStatus = msg.data.aalert;
+//         return {
+//             water_leak: (alertStatus & (1 << 12)) > 0,
+//         };
+//     },
+// };
 exports.diyruz_freepad_clicks = {
     cluster: "genMultistateInput",
     type: ["readResponse", "attributeReport"],
@@ -3504,7 +3515,7 @@ exports._3310_humidity = {
     cluster: "manuSpecificCentraliteHumidity",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const humidity = Number.parseFloat(msg.data.measuredValue) / 100.0;
+        const humidity = msg.data.measuredValue / 100.0;
         return { humidity };
     },
 };
@@ -3799,7 +3810,7 @@ exports.heiman_hcho = {
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
         if (msg.data.measuredValue) {
-            return { hcho: Number.parseFloat(msg.data.measuredValue) / 1000.0 };
+            return { hcho: msg.data.measuredValue / 1000.0 };
         }
     },
 };
@@ -4267,23 +4278,21 @@ exports.CCTSwitch_D0001_levelctrl = {
     type: ["commandMoveToLevel", "commandMoveToLevelWithOnOff", "commandMove", "commandStop"],
     convert: (model, msg, publish, options, meta) => {
         const payload = {};
-        if (msg.type === "commandMove" || msg.type === "commandStop") {
-            const action = "brightness";
-            if (msg.type === "commandStop") {
-                const direction = globalStore.getValue(msg.endpoint, "direction");
-                const duration = Date.now() - globalStore.getValue(msg.endpoint, "start");
-                payload.action = `${action}_${direction}_release`;
-                payload.duration = duration;
-                payload.action_duration = duration;
-            }
-            else {
-                const direction = msg.data.movemode === 1 ? "down" : "up";
-                payload.action = `${action}_${direction}_hold`;
-                globalStore.putValue(msg.endpoint, "direction", direction);
-                globalStore.putValue(msg.endpoint, "start", Date.now());
-                payload.rate = msg.data.rate;
-                payload.action_rate = msg.data.rate;
-            }
+        if (msg.type === "commandMove") {
+            (0, node_assert_1.default)("movemode" in msg.data);
+            const direction = msg.data.movemode === 1 ? "down" : "up";
+            payload.action = `brightness_${direction}_hold`;
+            globalStore.putValue(msg.endpoint, "direction", direction);
+            globalStore.putValue(msg.endpoint, "start", Date.now());
+            payload.rate = msg.data.rate;
+            payload.action_rate = msg.data.rate;
+        }
+        else if (msg.type === "commandStop") {
+            const direction = globalStore.getValue(msg.endpoint, "direction");
+            const duration = Date.now() - globalStore.getValue(msg.endpoint, "start");
+            payload.action = `brightness_${direction}_release`;
+            payload.duration = duration;
+            payload.action_duration = duration;
         }
         else {
             // wrap the messages from button2 and button4 into a single function
@@ -4294,10 +4303,11 @@ exports.CCTSwitch_D0001_levelctrl = {
             //         CCTSwitch_D0001_move_to_colortemp_recall below.
             let clk = "brightness";
             let cmd = null;
+            (0, node_assert_1.default)("level" in msg.data);
             payload.action_brightness = msg.data.level;
-            payload.action_transition = Number.parseFloat(msg.data.transtime) / 10.0;
+            payload.action_transition = msg.data.transtime / 10.0;
             payload.brightness = msg.data.level;
-            payload.transition = Number.parseFloat(msg.data.transtime) / 10.0;
+            payload.transition = msg.data.transtime / 10.0;
             if (msg.type === "commandMoveToLevel") {
                 // pressing the brightness button increments/decrements from 13-254.
                 // when it reaches the end (254) it will start decrementing by a step,
@@ -4328,6 +4338,7 @@ exports.CCTSwitch_D0001_lighting = {
     convert: (model, msg, publish, options, meta) => {
         const payload = {};
         if (msg.type === "commandMoveColorTemp") {
+            (0, node_assert_1.default)("movemode" in msg.data);
             const clk = "colortemp";
             payload.rate = msg.data.rate;
             payload.action_rate = msg.data.rate;
@@ -4358,10 +4369,11 @@ exports.CCTSwitch_D0001_lighting = {
             const lastSeq = globalStore.getValue(msg.endpoint, "last_seq");
             const seq = msg.meta.zclTransactionSequenceNumber;
             let clk = "colortemp";
+            (0, node_assert_1.default)("colortemp" in msg.data);
             payload.color_temp = msg.data.colortemp;
-            payload.transition = Number.parseFloat(msg.data.transtime) / 10.0;
+            payload.transition = msg.data.transtime / 10.0;
             payload.action_color_temp = msg.data.colortemp;
-            payload.action_transition = Number.parseFloat(msg.data.transtime) / 10.0;
+            payload.action_transition = msg.data.transtime / 10.0;
             // because the remote sends two commands for button4, we need to look at the previous command and
             // see if it was the recognized start command for button4 - if so, ignore this second command,
             // because it's not really button3, it's actually button4
@@ -4525,8 +4537,8 @@ exports.ZB003X_attr = {
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
         const data = msg.data;
-        const senslookup = { "0": "low", "1": "medium", "2": "high" };
-        const keeptimelookup = { "0": 0, "1": 30, "2": 60, "3": 120, "4": 240, "5": 480 };
+        const senslookup = { 0: "low", 1: "medium", 2: "high" };
+        const keeptimelookup = { 0: 0, 1: 30, 2: 60, 3: 120, 4: 240, 5: 480 };
         if (data && data.currentZoneSensitivityLevel !== undefined) {
             const value = data.currentZoneSensitivityLevel;
             return { sensitivity: senslookup[value] };
@@ -4640,7 +4652,7 @@ exports.schneider_temperature = {
     cluster: "msTemperatureMeasurement",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const temperature = Number.parseFloat(msg.data.measuredValue) / 100.0;
+        const temperature = msg.data.measuredValue / 100.0;
         const property = (0, utils_1.postfixWithEndpointName)("local_temperature", msg, model, meta);
         return { [property]: temperature };
     },
@@ -4661,7 +4673,7 @@ exports.wiser_smart_thermostat_client = {
 };
 exports.wiser_smart_setpoint_command_client = {
     cluster: "hvacThermostat",
-    type: ["command", "commandWiserSmartSetSetpoint"],
+    type: ["commandWiserSmartSetSetpoint"],
     convert: (model, msg, publish, options, meta) => {
         const attribute = {};
         const result = {};
@@ -4669,7 +4681,7 @@ exports.wiser_smart_setpoint_command_client = {
         // This also ensures the next client read of setpoint is in sync with the latest commanded value.
         attribute.occupiedHeatingSetpoint = msg.data.setpoint;
         msg.endpoint.saveClusterAttributeKeyValue("hvacThermostat", attribute);
-        result.occupied_heating_setpoint = Number.parseFloat(msg.data.setpoint) / 100.0;
+        result.occupied_heating_setpoint = msg.data.setpoint / 100.0;
         logger_1.logger.debug(`received wiser setpoint command with value: '${msg.data.setpoint}'`, NS);
         return result;
     },
@@ -4705,7 +4717,7 @@ exports.sihas_people_cnt = {
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
         const lookup = { "0": "idle", "1": "in", "2": "out" };
-        const value = (0, utils_1.precisionRound)(Number.parseFloat(msg.data.presentValue), 1);
+        const value = (0, utils_1.precisionRound)(msg.data.presentValue, 1);
         const people = (0, utils_1.precisionRound)(msg.data.presentValue, 0);
         let result = null;
         if (value <= 80) {
@@ -4866,7 +4878,7 @@ exports.SNZB02_temperature = {
     cluster: "msTemperatureMeasurement",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const temperature = Number.parseFloat(msg.data.measuredValue) / 100.0;
+        const temperature = msg.data.measuredValue / 100.0;
         // https://github.com/Koenkk/zigbee2mqtt/issues/13640
         // SNZB-02 reports stranges values sometimes
         if (temperature > -33 && temperature < 100) {
@@ -4880,7 +4892,7 @@ exports.SNZB02_humidity = {
     cluster: "msRelativeHumidity",
     type: ["attributeReport", "readResponse"],
     convert: (model, msg, publish, options, meta) => {
-        const humidity = Number.parseFloat(msg.data.measuredValue) / 100.0;
+        const humidity = msg.data.measuredValue / 100.0;
         // https://github.com/Koenkk/zigbee2mqtt/issues/13640
         // SNZB-02 reports stranges values sometimes
         if (humidity >= 0 && humidity <= 99.75) {
@@ -5158,7 +5170,8 @@ exports.command_on_presence = {
     cluster: "genOnOff",
     type: "commandOn",
     convert: (model, msg, publish, options, meta) => {
-        const payload1 = exports.checkin_presence.convert(model, msg, publish, options, meta);
+        const newMsg = { ...msg, type: "commandCheckin", data: {} };
+        const payload1 = exports.checkin_presence.convert(model, newMsg, publish, options, meta);
         const payload2 = exports.command_on.convert(model, msg, publish, options, meta);
         return { ...payload1, ...payload2 };
     },
@@ -5168,8 +5181,8 @@ exports.ias_ace_occupancy_with_timeout = {
     type: "commandGetPanelStatus",
     options: [exposes.options.occupancy_timeout()],
     convert: (model, msg, publish, options, meta) => {
-        msg.data.occupancy = 1;
-        return exports.occupancy_with_timeout.convert(model, msg, publish, options, meta);
+        const newMsg = { ...msg, type: "attributeReport", data: { occupancy: 1 } };
+        return exports.occupancy_with_timeout.convert(model, newMsg, publish, options, meta);
     },
 };
 // biome-ignore lint/style/useNamingConvention: ignored using `--suppress`
@@ -5323,8 +5336,8 @@ exports.terncy_raw = {
             value = msg.data[7];
             const sidelookup = { 5: "right", 7: "right", 40: "left", 56: "left" };
             if (sidelookup[value]) {
-                msg.data.occupancy = 1;
-                const payload = exports.occupancy_with_timeout.convert(model, msg, publish, options, meta);
+                const newMsg = { ...msg, type: "attributeReport", data: { occupancy: 1 } };
+                const payload = exports.occupancy_with_timeout.convert(model, newMsg, publish, options, meta);
                 if (payload) {
                     payload.action_side = sidelookup[value];
                     payload.side = sidelookup[value]; /* legacy: remove this line (replaced by action_side) */
@@ -5346,11 +5359,11 @@ exports.ZM35HQ_attr = {
             result = { ...result1 };
         }
         if (data && data.currentZoneSensitivityLevel !== undefined) {
-            const senslookup = { "0": "low", "1": "medium", "2": "high" };
+            const senslookup = { 0: "low", 1: "medium", 2: "high" };
             result.sensitivity = senslookup[data.currentZoneSensitivityLevel];
         }
         if (data && data["61441"] !== undefined) {
-            const keeptimelookup = { "0": 30, "1": 60, "2": 120 };
+            const keeptimelookup = { 0: 30, 1: 60, 2: 120 };
             result.keep_time = keeptimelookup[data["61441"]];
         }
         return result;
@@ -5397,7 +5410,14 @@ exports.wiser_smart_thermostat = {
             }
             if (msg.data[0xe020] !== undefined) {
                 // wiserSmartCurrentFilPiloteMode
-                const lookup = { 0: "comfort", 1: "comfort_-1", 2: "comfort_-2", 3: "energy_saving", 4: "frost_protection", 5: "off" };
+                const lookup = {
+                    0: "comfort",
+                    1: "comfort_-1",
+                    2: "comfort_-2",
+                    3: "energy_saving",
+                    4: "frost_protection",
+                    5: "off",
+                };
                 result.fip_setting = lookup[msg.data[0xe020]];
             }
             if (msg.data[0xe030] !== undefined) {
@@ -5406,7 +5426,14 @@ exports.wiser_smart_thermostat = {
             }
             if (msg.data[0xe031] !== undefined) {
                 // wiserSmartValveCalibrationStatus
-                const lookup = { 0: "ongoing", 1: "successful", 2: "uncalibrated", 3: "failed_e1", 4: "failed_e2", 5: "failed_e3" };
+                const lookup = {
+                    0: "ongoing",
+                    1: "successful",
+                    2: "uncalibrated",
+                    3: "failed_e1",
+                    4: "failed_e2",
+                    5: "failed_e3",
+                };
                 result.valve_calibration_status = lookup[msg.data[0xe031]];
             }
             // Radiator thermostats command changes from UI, but report value periodically for sync,