zigbee-herdsman-converters 23.0.0 → 23.1.0

package/dist/devices/efekta.js

@@ -43,6 +43,7 @@ const rarestReporting = { min: 0, max: 64800, change: 0 };
 const threeReporting = { min: 30, max: 1800, change: 1 };
 const fourReporting = { min: 30, max: 1800, change: 10 };
 const sixReporting = { min: 3600, max: 21600, change: 1 };
+const co2Reporting = { min: 10, max: 600, change: 0.000001 };
 exports.definitions = [
     {
         zigbeeModel: ["EFEKTA_iAQ3"],
@@ -51,26 +52,26 @@ exports.definitions = [
         description: "CO2 Monitor with IPS TFT Display, outdoor temperature and humidity, date and time",
         extend: [
             m.deviceEndpoints({ endpoints: { "1": 1, "2": 2 } }),
-            m.co2({ reporting: defaultReporting }),
+            m.co2({ reporting: co2Reporting }),
             m.temperature({
                 endpointNames: ["1"],
                 description: "Measured value of the built-in temperature sensor",
-                reporting: defaultReporting,
+                reporting: fourReporting,
             }),
             m.temperature({
                 endpointNames: ["2"],
                 description: "Measured value of the external temperature sensor",
-                reporting: defaultReporting,
+                reporting: fourReporting,
             }),
             m.humidity({
                 endpointNames: ["1"],
                 description: "Measured value of the built-in humidity sensor",
-                reporting: defaultReporting,
+                reporting: fourReporting,
             }),
             m.humidity({
                 endpointNames: ["2"],
                 description: "Measured value of the external humidity sensor",
-                reporting: defaultReporting,
+                reporting: fourReporting,
             }),
             m.numeric({
                 name: "voc_index",
@@ -81,14 +82,6 @@ exports.definitions = [
                 access: "STATE",
                 reporting: defaultReporting,
             }),
-            m.numeric({
-                name: "voc_raw_data",
-                unit: "ticks",
-                cluster: "genAnalogInput",
-                attribute: { ID: 0x0065, type: zigbee_herdsman_1.Zcl.DataType.SINGLE_PREC },
-                description: "SRAW_VOC, digital raw value",
-                access: "STATE",
-            }),
             m.illuminance({
                 access: "STATE",
                 reporting: defaultReporting,
@@ -471,10 +464,38 @@ exports.definitions = [
         vendor: "EFEKTA",
         description: "CO2 Monitor with IPS TFT Display, outdoor temperature and humidity, date and time",
         extend: [
-            m.co2({ reporting: normalReporting }),
-            m.temperature({ reporting: normalReporting }),
-            m.humidity({ reporting: normalReporting }),
-            m.illuminance({ reporting: normalReporting }),
+            m.deviceEndpoints({ endpoints: { "1": 1, "2": 2 } }),
+            m.co2({ reporting: co2Reporting }),
+            m.temperature({
+                endpointNames: ["1"],
+                description: "Measured value of the built-in temperature sensor",
+                reporting: fourReporting,
+            }),
+            m.temperature({
+                endpointNames: ["2"],
+                description: "Measured value of the external temperature sensor",
+                reporting: fourReporting,
+            }),
+            m.humidity({
+                endpointNames: ["1"],
+                description: "Measured value of the built-in humidity sensor",
+                reporting: fourReporting,
+            }),
+            m.humidity({
+                endpointNames: ["2"],
+                description: "Measured value of the external humidity sensor",
+                reporting: fourReporting,
+            }),
+            m.illuminance({ reporting: fourReporting }),
+            m.numeric({
+                name: "reading_interval",
+                unit: "seconds",
+                valueMin: 15,
+                valueMax: 300,
+                cluster: "msCO2",
+                attribute: { ID: 0x0201, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting the sensor reading interval.",
+            }),
             m.binary({
                 name: "auto_brightness",
                 valueOn: ["ON", 1],
@@ -483,6 +504,39 @@ exports.definitions = [
                 attribute: { ID: 0x0203, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
                 description: "Enable or Disable Auto Brightness of the Display",
             }),
+            m.binary({
+                name: "night_onoff_backlight",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0401, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Complete shutdown of the backlight at night mode",
+            }),
+            m.numeric({
+                name: "night_on_backlight",
+                unit: "Hr",
+                valueMin: 0,
+                valueMax: 23,
+                cluster: "msCO2",
+                attribute: { ID: 0x0405, type: zigbee_herdsman_1.Zcl.DataType.UINT8 },
+                description: "Night mode activation time",
+            }),
+            m.numeric({
+                name: "night_off_backlight",
+                unit: "Hr",
+                valueMin: 0,
+                valueMax: 23,
+                cluster: "msCO2",
+                attribute: { ID: 0x0406, type: zigbee_herdsman_1.Zcl.DataType.UINT8 },
+                description: "Night mode deactivation time",
+            }),
+            m.enumLookup({
+                name: "rotate",
+                lookup: { "0": 0, "90": 90, "180": 180, "270": 270 },
+                cluster: "msCO2",
+                attribute: { ID: 0x0285, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Display rotation angle",
+            }),
             m.binary({
                 name: "long_chart_period",
                 valueOn: ["ON", 1],
@@ -521,6 +575,14 @@ exports.definitions = [
                 attribute: { ID: 0x0210, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
                 description: "Adjust humidity",
             }),
+            m.binary({
+                name: "automatic_calibrations",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0402, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Automatic calibration of the CO2 sensor",
+            }),
             m.binary({
                 name: "forced_recalibration",
                 valueOn: ["ON", 1],
@@ -546,17 +608,60 @@ exports.definitions = [
                 attribute: { ID: 0x0207, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
                 description: "Start Manual FRC (Perform Forced Recalibration of the CO2 Sensor)",
             }),
+            m.binary({
+                name: "enable_gas",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0220, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable CO2 Gas Control",
+            }),
+            m.binary({
+                name: "invert_logic_gas",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0225, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable invert logic CO2 Gas Control",
+            }),
+            m.numeric({
+                name: "high_gas",
+                unit: "ppm",
+                valueMin: 400,
+                valueMax: 5000,
+                cluster: "msCO2",
+                attribute: { ID: 0x0221, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting High CO2 Gas Border",
+            }),
+            m.numeric({
+                name: "low_gas",
+                unit: "ppm",
+                valueMin: 400,
+                valueMax: 5000,
+                cluster: "msCO2",
+                attribute: { ID: 0x0222, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting Low CO2 Gas Border",
+            }),
         ],
     },
     {
         zigbeeModel: ["EFEKTA_CO2_Smart_Monitor"],
         model: "EFEKTA_CO2_Smart_Monitor",
         vendor: "EFEKTA",
-        description: "EFEKTA CO2 Smart Monitor, ws2812b indicator, can control the relay, binding",
+        description: "EFEKTA CO2 Smart Monitor, rgb indicator, can control the relay, binding",
         extend: [
-            m.co2({ reporting: normalReporting }),
-            m.temperature({ reporting: normalReporting }),
-            m.humidity({ reporting: normalReporting }),
+            m.co2({ reporting: co2Reporting }),
+            m.temperature({ reporting: fourReporting }),
+            m.humidity({ reporting: fourReporting }),
+            m.numeric({
+                name: "reading_interval",
+                unit: "seconds",
+                valueMin: 15,
+                valueMax: 300,
+                cluster: "msCO2",
+                attribute: { ID: 0x0201, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting the sensor reading interval.",
+            }),
             m.binary({
                 name: "light_indicator",
                 valueOn: ["ON", 1],
@@ -591,7 +696,7 @@ exports.definitions = [
                 valueStep: 0.1,
                 scale: 10,
                 cluster: "msTemperatureMeasurement",
-                attribute: { ID: 0x0210, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
+                attribute: { ID: 0x0410, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
                 description: "Adjust temperature",
             }),
             m.numeric({
@@ -604,6 +709,14 @@ exports.definitions = [
                 attribute: { ID: 0x0210, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
                 description: "Adjust humidity",
             }),
+            m.binary({
+                name: "automatic_calibrations",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0402, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Automatic calibration of the CO2 sensor",
+            }),
             m.binary({
                 name: "forced_recalibration",
                 valueOn: ["ON", 1],
@@ -637,11 +750,19 @@ exports.definitions = [
                 attribute: { ID: 0x0220, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
                 description: "Enable CO2 Gas Control",
             }),
+            m.binary({
+                name: "invert_logic_gas",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0225, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable invert logic CO2 Gas Control",
+            }),
             m.numeric({
                 name: "high_gas",
                 unit: "ppm",
                 valueMin: 400,
-                valueMax: 2000,
+                valueMax: 5000,
                 cluster: "msCO2",
                 attribute: { ID: 0x0221, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
                 description: "Setting High CO2 Gas Border",
@@ -650,62 +771,187 @@ exports.definitions = [
                 name: "low_gas",
                 unit: "ppm",
                 valueMin: 400,
-                valueMax: 2000,
+                valueMax: 5000,
                 cluster: "msCO2",
                 attribute: { ID: 0x0222, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
                 description: "Setting Low CO2 Gas Border",
             }),
+        ],
+    },
+    {
+        zigbeeModel: ["EFEKTA_AQ_Smart_Monitor"],
+        model: "EFEKTA_AQ_Smart_Monitor",
+        vendor: "EFEKTA",
+        description: "EFEKTA CO2 & VOC Index Smart Monitor, rgb indicator, can control the relay, binding",
+        extend: [
+            m.co2({ reporting: co2Reporting }),
+            m.temperature({ reporting: fourReporting }),
+            m.humidity({ reporting: fourReporting }),
+            m.numeric({
+                name: "voc_index",
+                unit: "VOC Index points",
+                cluster: "genAnalogInput",
+                attribute: "presentValue",
+                description: "VOC index",
+                access: "STATE",
+                reporting: defaultReporting,
+            }),
+            m.numeric({
+                name: "reading_interval",
+                unit: "seconds",
+                valueMin: 15,
+                valueMax: 300,
+                cluster: "msCO2",
+                attribute: { ID: 0x0201, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting the sensor reading interval.",
+            }),
             m.binary({
-                name: "enable_temperature",
+                name: "light_indicator",
                 valueOn: ["ON", 1],
                 valueOff: ["OFF", 0],
-                cluster: "msTemperatureMeasurement",
-                attribute: { ID: 0x0220, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
-                description: "Enable Temperature Control",
+                cluster: "msCO2",
+                attribute: { ID: 0x0211, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable or Disable light indicator",
             }),
             m.numeric({
-                name: "high_temperature",
+                name: "light_indicator_level",
+                unit: "%",
+                valueMin: 0,
+                valueMax: 100,
+                cluster: "msCO2",
+                attribute: { ID: 0x0209, type: zigbee_herdsman_1.Zcl.DataType.UINT8 },
+                description: "Light indicator level",
+            }),
+            m.numeric({
+                name: "set_altitude",
+                unit: "meters",
+                valueMin: 0,
+                valueMax: 3000,
+                cluster: "msCO2",
+                attribute: { ID: 0x0205, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting the altitude above sea level (for high accuracy of the CO2 sensor)",
+            }),
+            m.numeric({
+                name: "temperature_offset",
                 unit: "°C",
-                valueMin: -5,
+                valueMin: -50,
                 valueMax: 50,
+                valueStep: 0.1,
+                scale: 10,
                 cluster: "msTemperatureMeasurement",
-                attribute: { ID: 0x0221, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
-                description: "Setting High Temperature Border",
+                attribute: { ID: 0x0410, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
+                description: "Adjust temperature",
             }),
             m.numeric({
-                name: "low_temperature",
-                unit: "°C",
-                valueMin: -5,
+                name: "humidity_offset",
+                unit: "%",
+                valueMin: -50,
                 valueMax: 50,
-                cluster: "msTemperatureMeasurement",
-                attribute: { ID: 0x0222, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
-                description: "Setting Low Temperature Border",
+                valueStep: 1,
+                cluster: "msRelativeHumidity",
+                attribute: { ID: 0x0210, type: zigbee_herdsman_1.Zcl.DataType.INT16 },
+                description: "Adjust humidity",
             }),
             m.binary({
-                name: "enable_humidity",
+                name: "automatic_calibrations",
                 valueOn: ["ON", 1],
                 valueOff: ["OFF", 0],
-                cluster: "msRelativeHumidity",
+                cluster: "msCO2",
+                attribute: { ID: 0x0402, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Automatic calibration of the CO2 sensor",
+            }),
+            m.binary({
+                name: "forced_recalibration",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0202, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Start FRC (Perform Forced Recalibration of the CO2 Sensor)",
+            }),
+            m.binary({
+                name: "factory_reset_co2",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0206, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Factory Reset CO2 sensor",
+            }),
+            m.numeric({
+                name: "manual_forced_recalibration",
+                unit: "ppm",
+                valueMin: 0,
+                valueMax: 5000,
+                cluster: "msCO2",
+                attribute: { ID: 0x0207, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Start Manual FRC (Perform Forced Recalibration of the CO2 Sensor)",
+            }),
+            m.binary({
+                name: "enable_co2_gas",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
                 attribute: { ID: 0x0220, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
-                description: "Enable Humidity Control",
+                description: "Enable CO2 Gas Control",
+            }),
+            m.binary({
+                name: "invert_logic_co2_gas",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "msCO2",
+                attribute: { ID: 0x0225, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable invert logic CO2 Gas Control",
             }),
             m.numeric({
-                name: "high_humidity",
-                unit: "%",
+                name: "high_co2_gas",
+                unit: "ppm",
+                valueMin: 400,
+                valueMax: 5000,
+                cluster: "msCO2",
+                attribute: { ID: 0x0221, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting High CO2 Gas Border",
+            }),
+            m.numeric({
+                name: "low_co2_gas",
+                unit: "ppm",
+                valueMin: 400,
+                valueMax: 5000,
+                cluster: "msCO2",
+                attribute: { ID: 0x0222, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
+                description: "Setting Low CO2 Gas Border",
+            }),
+            m.binary({
+                name: "enable_voc",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "genAnalogInput",
+                attribute: { ID: 0x0220, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable VOC Control",
+            }),
+            m.binary({
+                name: "invert_logic_voc",
+                valueOn: ["ON", 1],
+                valueOff: ["OFF", 0],
+                cluster: "genAnalogInput",
+                attribute: { ID: 0x0225, type: zigbee_herdsman_1.Zcl.DataType.BOOLEAN },
+                description: "Enable invert logic VOC Control",
+            }),
+            m.numeric({
+                name: "high_voc",
+                unit: "VOC Index points",
                 valueMin: 0,
-                valueMax: 99,
-                cluster: "msRelativeHumidity",
+                valueMax: 500,
+                cluster: "genAnalogInput",
                 attribute: { ID: 0x0221, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
-                description: "Setting High Humidity Border",
+                description: "Setting High VOC Border",
             }),
             m.numeric({
-                name: "low_humidity",
-                unit: "%",
+                name: "low_voc",
+                unit: "VOC Index points",
                 valueMin: 0,
-                valueMax: 99,
-                cluster: "msRelativeHumidity",
+                valueMax: 500,
+                cluster: "genAnalogInput",
                 attribute: { ID: 0x0222, type: zigbee_herdsman_1.Zcl.DataType.UINT16 },
-                description: "Setting Low Humidity Border",
+                description: "Setting Low VOC Border",
             }),
         ],
     },