zigbee-herdsman-converters 15.0.86 → 15.0.88

package/devices/awox.js

@@ -70,6 +70,7 @@ module.exports = [
         whiteLabel: [{vendor: 'EGLO', model: '12229'}],
     },
     {
+        zigbeeModel: ['ERCU_Zm'],
         fingerprint: [
             {
                 type: 'EndDevice', manufacturerName: 'AwoX', modelID: 'TLSR82xx', powerSource: 'Battery', endpoints: [

package/devices/ikea.js

@@ -1115,6 +1115,7 @@ module.exports = [
         description: 'Vindstyrka air quality and humidity sensor',
         fromZigbee: [fz.temperature, fz.humidity, fz.pm25, ikea.fz.ikea_voc_index],
         toZigbee: [],
+        ota: ota.zigbeeOTA,
         exposes: [e.temperature(), e.humidity(), e.pm25(), e.voc_index().withDescription('Sensirion VOC index')],
         configure: async (device, coordinatorEndpoint, logger) => {
             const ep = device.getEndpoint(1);

package/devices/lonsonho.js

@@ -173,7 +173,7 @@ module.exports = [
         vendor: 'Lonsonho',
         description: 'Zigbee 3.0 LED-bulb, RGBW LED',
         extend: extend.light_onoff_brightness_colortemp_color(
-            {disableColorTempStartup: true, colorTempRange: [153, 500], disableEffect: true}),
+            {disableColorTempStartup: true, colorTempRange: [153, 500], disableEffect: true, disablePowerOnBehavior: true}),
     },
     {
         fingerprint: [{modelID: 'TS0003', manufacturerName: '_TYZB01_zsl6z0pw'}, {modelID: 'TS0003', manufacturerName: '_TYZB01_uqkphoed'}],

package/devices/niko.js

@@ -311,4 +311,35 @@ module.exports = [
         },
         exposes: [e.cover_position()],
     },
+    {
+        zigbeeModel: ['Battery switch, 4 button'],
+        model: '552-720X4',
+        vendor: 'Niko',
+        description: 'Battery switch with 4 buttons',
+        meta: {multiEndpoint: true},
+        fromZigbee: [fz.command_on, fz.command_off, fz.identify, fz.battery, fz.command_move, fz.command_stop],
+        toZigbee: [],
+        endpoint: (device) => {
+            return {top_left: 1, bottom_left: 2, top_right: 3, bottom_right: 4};
+        },
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const ep1 = device.getEndpoint(1);
+            await reporting.bind(ep1, coordinatorEndpoint, ['genGroups', 'genOnOff', 'genLevelCtrl']);
+            await reporting.batteryPercentageRemaining(ep1);
+            const ep2 = device.getEndpoint(2);
+            await reporting.bind(ep2, coordinatorEndpoint, ['genOnOff', 'genLevelCtrl']);
+            const ep3 = device.getEndpoint(3);
+            await reporting.bind(ep3, coordinatorEndpoint, ['genOnOff', 'genLevelCtrl']);
+            const ep4 = device.getEndpoint(4);
+            await reporting.bind(ep4, coordinatorEndpoint, ['genOnOff', 'genLevelCtrl']);
+        },
+        exposes: [
+            e.action(['on_top_left', 'off_top_left', 'on_bottom_left', 'off_bottom_left', 'on_top_right', 'off_top_right',
+                'on_bottom_right', 'off_bottom_right', 'brightness_move_up_top_left', 'brightness_move_up_bottom_left',
+                'brightness_move_up_top_right', 'brightness_move_up_bottom_right', 'brightness_move_down_top_left',
+                'brightness_move_down_bottom_left', 'brightness_move_down_top_right', 'brightness_move_down_bottom_right',
+                'brightness_stop_top_left', 'brightness_stop_bottom_left', 'brightness_stop_top_right', 'brightness_stop_bottom_right']),
+            e.battery(),
+        ],
+    },
 ];

package/devices/schneider_electric.js

@@ -1077,4 +1077,30 @@ module.exports = [
         toZigbee: [],
         exposes: [e.battery_low(), e.contact(), e.tamper()],
     },
+    {
+        zigbeeModel: ['EKO07259'],
+        model: 'EKO07259',
+        vendor: 'Schneider Electric',
+        description: 'Smart thermostat',
+        fromZigbee: [fz.stelpro_thermostat, fz.metering, fz.schneider_pilot_mode, fz.wiser_device_info, fz.hvac_user_interface],
+        toZigbee: [tz.thermostat_occupied_heating_setpoint, tz.thermostat_system_mode, tz.thermostat_running_state,
+            tz.thermostat_local_temperature, tz.thermostat_control_sequence_of_operation, tz.schneider_pilot_mode,
+            tz.schneider_thermostat_keypad_lockout, tz.thermostat_temperature_display_mode],
+        exposes: [exposes.binary('keypad_lockout', ea.STATE_SET, 'lock1', 'unlock')
+            .withDescription('Enables/disables physical input on the device'),
+        exposes.enum('schneider_pilot_mode', ea.ALL, ['contactor', 'pilot']).withDescription('Controls piloting mode'),
+        exposes.enum('temperature_display_mode', ea.ALL, ['celsius', 'fahrenheit'])
+            .withDescription('The temperature format displayed on the thermostat screen'),
+        exposes.climate().withSetpoint('occupied_heating_setpoint', 4, 30, 0.5).withLocalTemperature()
+            .withSystemMode(['off', 'heat']).withRunningState(['idle', 'heat']).withPiHeatingDemand()],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint1 = device.getEndpoint(1);
+            const endpoint2 = device.getEndpoint(2);
+            await reporting.bind(endpoint1, coordinatorEndpoint, ['hvacThermostat']);
+            await reporting.thermostatPIHeatingDemand(endpoint1);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint1);
+            await reporting.bind(endpoint2, coordinatorEndpoint, ['seMetering']);
+            await endpoint1.read('hvacUserInterfaceCfg', ['keypadLockout', 'tempDisplayMode']);
+        },
+    },
 ];

package/devices/sylvania.js

@@ -197,4 +197,12 @@ module.exports = [
         extend: extend.ledvance.light_onoff_brightness_colortemp_color({colorTempRange: [142, 555]}),
         ota: ota.ledvance,
     },
+    {
+        zigbeeModel: ['BR30 W 10 year'],
+        model: '74453',
+        vendor: 'Sylvania',
+        description: 'LIGHTIFY LED soft white BR30',
+        extend: extend.ledvance.light_onoff_brightness(),
+        ota: ota.ledvance,
+    },
 ];

package/devices/tuya.js

@@ -2128,7 +2128,6 @@ module.exports = [
             {modelID: 'TS0601', manufacturerName: '_TZE200_udank5zs'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_zuz7f94z'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_nv6nxo0c'},
-            {modelID: 'TS0601', manufacturerName: '_TZE200_68nvbio9'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_3ylew7b4'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_llm0epxg'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_n1aauwb4'},
@@ -2239,6 +2238,42 @@ module.exports = [
                 .withFeature(exposes.text('workdays_schedule', ea.STATE_SET))
                 .withFeature(exposes.text('holidays_schedule', ea.STATE_SET))],
     },
+    {
+        fingerprint: tuya.fingerprint('TS0601', ['_TZE200_68nvbio9']),
+        model: 'TS0601_cover_3',
+        vendor: 'TuYa',
+        description: 'Cover motor',
+        fromZigbee: [tuya.fz.datapoints],
+        toZigbee: [tuya.tz.datapoints],
+        onEvent: tuya.onEventSetTime,
+        options: [exposes.options.invert_cover()],
+        configure: tuya.configureMagicPacket,
+        exposes: [
+            e.battery(), e.cover_position(),
+            exposes.enum('reverse_direction', ea.STATE_SET, ['forward', 'back']).withDescription('Reverse the motor direction'),
+            exposes.enum('border', ea.STATE_SET, ['up', 'down', 'up_delete', 'down_delete', 'remove_top_bottom']),
+            exposes.enum('click_control', ea.STATE_SET, ['up', 'down']).withDescription('Single motor steps'),
+            exposes.binary('motor_fault', ea.STATE, true, false),
+        ],
+        whiteLabel: [
+            {vendor: 'Zemismart', model: 'ZM16EL-03/33'}, // _TZE200_68nvbio
+        ],
+        meta: {
+            // All datapoints go in here
+            tuyaDatapoints: [
+                [1, 'state', tuya.valueConverterBasic.lookup({'OPEN': tuya.enum(0), 'STOP': tuya.enum(1), 'CLOSE': tuya.enum(2)})],
+                [2, 'position', tuya.valueConverter.coverPosition],
+                [3, 'position', tuya.valueConverter.raw],
+                [5, 'reverse_direction', tuya.valueConverterBasic.lookup({'forward': tuya.enum(0), 'back': tuya.enum(1)})],
+                [12, 'motor_fault', tuya.valueConverter.trueFalse1],
+                [13, 'battery', tuya.valueConverter.raw],
+                [16, 'border', tuya.valueConverterBasic.lookup({
+                    'up': tuya.enum(0), 'down': tuya.enum(1), 'up_delete': tuya.enum(2), 'down_delete': tuya.enum(3),
+                    'remove_top_bottom': tuya.enum(4)})],
+                [20, 'click_control', tuya.valueConverterBasic.lookup({'up': tuya.enum(0), 'down': tuya.enum(1)})],
+            ],
+        },
+    },
     {
         fingerprint: tuya.fingerprint('TS0601', [
             '_TZE200_sur6q7ko', /* model: '3012732', vendor: 'LSC Smart Connect' */
@@ -3252,6 +3287,28 @@ module.exports = [
             await reporting.bind(device.getEndpoint(4), coordinatorEndpoint, ['genOnOff']);
         },
     },
+    {
+        zigbeeModel: ['TS0726'],
+        model: 'TS0726',
+        vendor: 'TuYa',
+        description: '4 gang switch with neutral wire',
+        fromZigbee: [fz.on_off, tuya.fz.power_on_behavior_2, fz.ignore_basic_report],
+        toZigbee: [tz.on_off, tuya.tz.power_on_behavior_2],
+        exposes: [e.switch().withEndpoint('l1'), e.power_on_behavior().withEndpoint('l1'), e.switch().withEndpoint('l2'),
+            e.power_on_behavior().withEndpoint('l2'), e.switch().withEndpoint('l3'), e.power_on_behavior().withEndpoint('l3'),
+            e.switch().withEndpoint('l4'), e.power_on_behavior().withEndpoint('l4')],
+        endpoint: (device) => {
+            return {'l1': 1, 'l2': 2, 'l3': 3, 'l4': 4};
+        },
+        meta: {multiEndpoint: true},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            await tuya.configureMagicPacket(device, coordinatorEndpoint, logger);
+            await reporting.bind(device.getEndpoint(1), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(3), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(4), coordinatorEndpoint, ['genOnOff']);
+        },
+    },
     {
         fingerprint: [{modelID: 'TS0006', manufacturerName: '_TYZB01_ltundz9m'},
             {modelID: 'TS0006', manufacturerName: '_TZ3000_jyupj3fw'}],

package/devices/xiaomi.js

@@ -776,12 +776,12 @@ module.exports = [
         model: 'ZNLDP12LM',
         vendor: 'Xiaomi',
         description: 'Aqara smart LED bulb',
-        toZigbee: xiaomiExtend.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}).toZigbee.concat([
-            tz.xiaomi_light_power_outage_memory]),
-        fromZigbee: xiaomiExtend.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}).fromZigbee,
+        toZigbee: xiaomiExtend.light_onoff_brightness_colortemp({colorTempRange: [153, 370], disablePowerOnBehavior: true})
+            .toZigbee.concat([tz.xiaomi_light_power_outage_memory]),
+        fromZigbee: xiaomiExtend.light_onoff_brightness_colortemp({colorTempRange: [153, 370], disablePowerOnBehavior: true}).fromZigbee,
         // power_on_behavior 'toggle' does not seem to be supported
-        exposes: xiaomiExtend.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}).exposes.concat([
-            e.power_outage_memory().withAccess(ea.STATE_SET)]),
+        exposes: xiaomiExtend.light_onoff_brightness_colortemp({colorTempRange: [153, 370], disablePowerOnBehavior: true})
+            .exposes.concat([e.power_outage_memory().withAccess(ea.STATE_SET)]),
         ota: ota.zigbeeOTA,
     },
     {

package/lib/tuya.js

@@ -1637,6 +1637,7 @@ const tuyaTz = {
             'schedule_wednesday', 'schedule_thursday', 'schedule_friday', 'schedule_saturday', 'schedule_sunday', 'clear_fault',
             'scale_protection', 'error', 'radar_scene', 'radar_sensitivity', 'tumble_alarm_time', 'tumble_switch', 'fall_sensitivity',
             'min_temperature', 'max_temperature', 'window_detection', 'boost_heating', 'alarm_ringtone', 'alarm_time', 'fan_speed',
+            'reverse_direction', 'border', 'click_control',
         ],
         convertSet: async (entity, key, value, meta) => {
             // A set converter is only called once; therefore we need to loop

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "15.0.86",
+  "version": "15.0.88",
   "description": "Collection of device converters to be used with zigbee-herdsman",
   "main": "index.js",
   "files": [