zigbee-herdsman-converters 14.0.574 → 14.0.577

package/devices/bitron.js

@@ -186,7 +186,8 @@ module.exports = [
         vendor: 'SMaBiT (Bitron Video)',
         description: 'Wireless wall thermostat with relay',
         fromZigbee: [fz.legacy.bitron_thermostat_att_report, fz.battery, fz.hvac_user_interface],
-        toZigbee: [tz.thermostat_occupied_heating_setpoint, tz.thermostat_local_temperature_calibration, tz.thermostat_local_temperature,
+        toZigbee: [tz.thermostat_control_sequence_of_operation, tz.thermostat_occupied_heating_setpoint,
+            tz.thermostat_occupied_cooling_setpoint, tz.thermostat_local_temperature_calibration, tz.thermostat_local_temperature,
             tz.thermostat_running_state, tz.thermostat_temperature_display_mode, tz.thermostat_keypad_lockout, tz.thermostat_system_mode],
         exposes: [e.battery(), exposes.climate().withSetpoint('occupied_heating_setpoint', 7, 30, 0.5).withLocalTemperature()
             .withSystemMode(['off', 'auto', 'heat']).withRunningState(['idle', 'heat', 'cool'])
@@ -201,6 +202,7 @@ module.exports = [
             await reporting.thermostatTemperature(endpoint);
             await reporting.thermostatTemperatureCalibration(endpoint);
             await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatOccupiedCoolingSetpoint(endpoint);
             await reporting.thermostatRunningState(endpoint);
             await reporting.batteryAlarmState(endpoint);
             await reporting.batteryVoltage(endpoint);

package/devices/dresden_elektronik.js

@@ -23,4 +23,12 @@ module.exports = [
         description: 'ZigBee Light Link wireless electronic ballast color temperature',
         extend: extend.light_onoff_brightness_colortemp(),
     },
+    {
+        zigbeeModel: ['Kobold'],
+        model: 'BN-600110',
+        vendor: 'Dresden Elektronik',
+        description: 'Zigbee 3.0 dimm actuator',
+        extend: extend.light_onoff_brightness(),
+        ota: ota.zigbeeOTA,
+    },
 ];

package/devices/heiman.js

@@ -699,4 +699,21 @@ module.exports = [
         },
         exposes: [e.battery(), e.action(['pressed']), e.battery_low(), e.tamper()],
     },
+    {
+        zigbeeModel: ['HS3AQ-EFA-3.0'],
+        model: 'HS3AQ',
+        vendor: 'HEIMAN',
+        description: 'Smart air quality monitor',
+        fromZigbee: [fz.co2, fz.humidity, fz.battery, fz.temperature],
+        toZigbee: [],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['msRelativeHumidity', 'genPowerCfg', 'msTemperatureMeasurement', 'msCO2']);
+            await reporting.batteryPercentageRemaining(endpoint);
+            await reporting.temperature(endpoint, {min: 1, max: constants.repInterval.MINUTES_5, change: 10}); // 0.1 degree change
+            await reporting.humidity(endpoint, {min: 1, max: constants.repInterval.MINUTES_5, change: 10}); // 0.1 % change
+            await reporting.co2(endpoint, {min: 5, max: constants.repInterval.MINUTES_5, change: 0.00005}); // 50 ppm change
+        },
+        exposes: [e.co2(), e.battery(), e.humidity(), e.temperature()],
+    },
 ];

package/devices/kurvia.js

@@ -0,0 +1,21 @@
+const tz = require('../converters/toZigbee');
+const exposes = require('../lib/exposes');
+const extend = require('../lib/extend');
+const e = exposes.presets;
+
+const extendData = extend.light_onoff_brightness_colortemp_color({colorTempRange: [250, 454]});
+
+
+module.exports = [
+    {
+        zigbeeModel: ['ZB-CL01'],
+        model: 'ZB-CL01',
+        vendor: 'KURVIA',
+        description: 'GU10 GRBWC built from AliExpress',
+        exposes: extendData.exposes.concat(e.power_on_behavior()),
+        toZigbee: [tz.on_off].concat(extendData.toZigbee),
+        fromZigbee: extendData.fromZigbee,
+        meta: {applyRedFix: true, enhancedHue: false},
+    },
+];
+

package/devices/led_trading.js

@@ -21,6 +21,31 @@ const fzLocal = {
             }
         },
     },
+    led_trading_9125: {
+        cluster: 'greenPower',
+        type: ['commandNotification', 'commandCommisioningNotification'],
+        convert: (model, msg, publish, options, meta) => {
+            const commandID = msg.data.commandID;
+            if (utils.hasAlreadyProcessedMessage(msg, msg.data.frameCounter, `${msg.device.ieeeAddr}_${commandID}`)) return;
+            if (commandID === 104) return; // Skip commisioning command.
+
+            // Button 1: A0 (top left)
+            // Button 2: A1 (bottom left)
+            // Button 3: B0 (top right)
+            // Button 4: B1 (bottom right)
+            const lookup = {
+                0x10: 'press_1', 0x14: 'release_1', 0x11: 'press_2', 0x15: 'release_2', 0x13: 'press_3', 0x17: 'release_3',
+                0x12: 'press_4', 0x16: 'release_4', 0x64: 'press_1_and_3', 0x65: 'release_1_and_3', 0x62: 'press_2_and_4',
+                0x63: 'release_2_and_4',
+            };
+
+            if (!lookup.hasOwnProperty(commandID)) {
+                meta.logger.error(`LED Trading 9125: missing command '${commandID}'`);
+            } else {
+                return {action: lookup[commandID]};
+            }
+        },
+    },
 };
 
 module.exports = [
@@ -66,4 +91,15 @@ module.exports = [
             await reporting.bind(device.getEndpoint(5), coordinatorEndpoint, ['genOnOff']);
         },
     },
+    {
+        fingerprint: [{modelID: 'GreenPower_2', ieeeAddr: /^0x00000000017.....$/, manufId: null}],
+        model: '9125',
+        vendor: 'LED Trading',
+        description: 'FOH smart switch',
+        whiteLabel: [{vendor: 'Sunricher', model: 'SR-ZGP2801K4-FOH-E'}],
+        fromZigbee: [fzLocal.led_trading_9125],
+        toZigbee: [],
+        exposes: [e.action(['press_1', 'release_1', 'press_2', 'release_2', 'press_3', 'release_3', 'press_4', 'release_4',
+            'press_1_and_3', 'release_1_and_3', 'press_2_and_4', 'release_2_and_4'])],
+    },
 ];

package/devices/osram.js

@@ -83,7 +83,7 @@ module.exports = [
         model: 'AC03642',
         vendor: 'OSRAM',
         description: 'SMART+ CLASSIC A 60 TW',
-        extend: extend.ledvance.light_onoff_brightness_colortemp(),
+        extend: extend.ledvance.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}),
         ota: ota.ledvance,
     },
     {

package/devices/philips.js

@@ -2455,6 +2455,13 @@ module.exports = [
         description: 'Akari downlight',
         extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
     },
+    {
+        zigbeeModel: ['LCD004'],
+        model: '8719514382350',
+        vendor: 'Philips',
+        description: 'Akari downlight',
+        extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
+    },
     {
         zigbeeModel: ['LCD006'],
         model: '9290031346',

package/devices/robb.js

@@ -195,7 +195,7 @@ module.exports = [
         whiteLabel: [{vendor: 'Sunricher', model: 'SR-ZG2835'}],
     },
     {
-        zigbeeModel: ['ROB_200-017-0'],
+        zigbeeModel: ['ROB_200-017-0', 'HK-PLUG-A'],
         model: 'ROB_200-017-0',
         vendor: 'ROBB',
         description: 'Zigbee smart plug',

package/devices/sunricher.js

@@ -2,9 +2,11 @@ const exposes = require('../lib/exposes');
 const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
 const tz = require('../converters/toZigbee');
 const reporting = require('../lib/reporting');
+const constants = require('../lib/constants');
 const extend = require('../lib/extend');
 const utils = require('../lib/utils');
 const e = exposes.presets;
+const ea = exposes.access;
 
 const fzLocal = {
     sunricher_SRZGP2801K45C: {
@@ -344,4 +346,190 @@ module.exports = [
         exposes: [e.action(['press_on', 'press_off', 'press_high', 'press_low', 'hold_high', 'hold_low', 'high_low_release',
             'cw_ww_release', 'cw_dec_ww_inc', 'ww_inc_cw_dec', 'r_g_b', 'b_g_r', 'rgb_release'])],
     },
+    {
+        zigbeeModel: ['ZG9092'],
+        model: 'SR-ZG9092A',
+        vendor: 'Sunricher',
+        description: 'Touch thermostat',
+        fromZigbee: [fz.thermostat, fz.namron_thermostat, fz.metering, fz.electrical_measurement],
+        toZigbee: [tz.thermostat_occupied_heating_setpoint, tz.thermostat_unoccupied_heating_setpoint, tz.thermostat_occupancy,
+            tz.thermostat_local_temperature_calibration, tz.thermostat_local_temperature, tz.thermostat_outdoor_temperature,
+            tz.thermostat_system_mode, tz.thermostat_control_sequence_of_operation, tz.thermostat_running_state,
+            tz.namron_thermostat],
+        exposes: [
+            e.local_temperature(),
+            exposes.numeric('outdoor_temperature', ea.STATE_GET).withUnit('°C')
+                .withDescription('Current temperature measured from the floor sensor'),
+            exposes.climate()
+                .withSetpoint('occupied_heating_setpoint', 0, 40, 0.1)
+                .withSetpoint('unoccupied_heating_setpoint', 0, 40, 0.1)
+                .withLocalTemperature()
+                .withLocalTemperatureCalibration(-3, 3, 0.1)
+                .withSystemMode(['off', 'auto', 'heat'])
+                .withRunningState(['idle', 'heat']),
+            exposes.binary('away_mode', ea.ALL, 'ON', 'OFF')
+                .withDescription('Enable/disable away mode'),
+            e.power(), e.current(), e.voltage(), e.energy(),
+            exposes.enum('button_vibration_level', ea.ALL, ['off', 'low', 'high'])
+                .withDescription('Key beep volume and vibration level.  Default: Low.'),
+            exposes.enum('floor_sensor_type', ea.ALL, ['10k', '15k', '50k', '100k', '12k'])
+                .withDescription('Type of the external floor sensor.  Default: NTC 10K/25.'),
+            exposes.enum('sensor', ea.ALL, ['air', 'floor', 'both'])
+                .withDescription('The sensor used for heat control.  Default: Room Sensor.'),
+            exposes.enum('powerup_status', ea.ALL, ['default', 'last_status'])
+                .withDescription('The mode after a power reset.  Default: Previous Mode.'),
+            exposes.numeric('floor_sensor_calibration', ea.ALL)
+                .withUnit('°C')
+                .withValueMin(-3).withValueMax(3).withValueStep(0.1)
+                .withDescription('The tempearatue calibration for the exernal floor sensor, between -3 and 3 in 0.1°C.  Default: 0.'),
+            exposes.numeric('dry_time', ea.ALL)
+                .withUnit('min')
+                .withValueMin(5).withValueMax(100)
+                .withDescription('The duration of Dry Mode, between 5 and 100 minutes.  Default: 5.'),
+            exposes.enum('mode_after_dry', ea.ALL, ['off', 'manual', 'auto', 'away'])
+                .withDescription('The mode after Dry Mode.  Default: Auto.'),
+            exposes.enum('temperature_display', ea.ALL, ['room', 'floor'])
+                .withDescription('The temperature on the display.  Default: Room Temperature.'),
+            exposes.numeric('window_open_check', ea.ALL)
+                .withUnit('°C')
+                .withValueMin(0).withValueMax(8).withValueStep(0.5)
+                .withDescription('The threshold to detect window open, between 0.0 and 8.0 in 0.5 °C.  Default: 0 (disabled).'),
+            exposes.numeric('hysterersis', ea.ALL)
+                .withUnit('°C')
+                .withValueMin(0.5).withValueMax(2).withValueStep(0.1)
+                .withDescription('Hysteresis setting, between 0.5 and 2 in 0.1 °C.  Default: 0.5.'),
+            exposes.numeric('alarm_airtemp_overvalue', ea.ALL)
+                .withUnit('°C')
+                .withValueMin(20).withValueMax(60)
+                .withDescription('Room temperature alarm threshold, between 20 and 60 in °C.  0 means disabled.  Default: 45.'),
+        ],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            const binds = [
+                'genBasic', 'genIdentify', 'hvacThermostat', 'seMetering', 'haElectricalMeasurement', 'genAlarms',
+                'msOccupancySensing', 'genTime', 'hvacUserInterfaceCfg',
+            ];
+            await reporting.bind(endpoint, coordinatorEndpoint, binds);
+
+            // standard ZCL attributes
+            await reporting.thermostatTemperature(endpoint);
+            await reporting.thermostatOccupiedHeatingSetpoint(endpoint);
+            await reporting.thermostatUnoccupiedHeatingSetpoint(endpoint);
+
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: 'ocupancy',
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null,
+            }]);
+
+            await endpoint.read('haElectricalMeasurement', ['acVoltageMultiplier', 'acVoltageDivisor', 'acCurrentMultiplier']);
+            await endpoint.read('haElectricalMeasurement', ['acCurrentDivisor']);
+
+            await reporting.activePower(endpoint);
+            await reporting.rmsCurrent(endpoint, {min: 10, change: 10});
+            await reporting.rmsVoltage(endpoint, {min: 10});
+            await reporting.currentSummDelivered(endpoint);
+
+            // Custom attributes
+            const options = {manufacturerCode: 0x1224}; // Sunricher Manufacturer Code
+
+            // OperateDisplayLcdBrightnesss - removed as it has no effect
+            // ButtonVibrationLevel
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1001, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+            // FloorSensorType
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1002, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+            // ControlType
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1003, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+            // PowerUpStatus
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1004, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+            // FloorSensorCalibration
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1005, type: 0x28},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 0}],
+            options);
+            // DryTime
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1006, type: 0x20},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 0}],
+            options);
+            // ModeAfterDry
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1007, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+            // TemperatureDisplay
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1008, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+            // WindowOpenCheck
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x1009, type: 0x20},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 0}],
+            options);
+
+            // Hysterersis
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x100A, type: 0x20},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 0}],
+            options);
+
+            // AlarmAirTempOverValue
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x2001, type: 0x20},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: 0}],
+            options);
+            // Away Mode Set
+            await endpoint.configureReporting('hvacThermostat', [{
+                attribute: {ID: 0x2002, type: 0x30},
+                minimumReportInterval: 0,
+                maximumReportInterval: constants.repInterval.HOUR,
+                reportableChange: null}],
+            options);
+
+            // Device does not asks for the time with binding, we need to write time during configure
+
+            // Trigger initial read
+            await endpoint.read('hvacThermostat', ['systemMode', 'runningState', 'occupiedHeatingSetpoint']);
+            await endpoint.read('hvacThermostat', [0x1001, 0x1002, 0x1003], options);
+            await endpoint.read('hvacThermostat', [0x1004, 0x1005, 0x1006, 0x1007], options);
+            await endpoint.read('hvacThermostat', [0x1008, 0x1009, 0x100A], options);
+            await endpoint.read('hvacThermostat', [0x2001, 0x2002], options);
+        },
+    },
 ];

package/devices/tuya.js

@@ -467,6 +467,10 @@ module.exports = [
             return {'l1': 1, 'l2': 2};
         },
         meta: {multiEndpoint: true},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await endpoint.read('genBasic', ['manufacturerName', 'zclVersion', 'appVersion', 'modelId', 'powerSource', 0xfffe]);
+        },
     },
     {
         fingerprint: [{modelID: 'TS011F', manufacturerName: '_TZ3000_rk2yzt0u'},
@@ -912,6 +916,10 @@ module.exports = [
         fromZigbee: [fz.command_emergency, fz.battery],
         exposes: [e.battery(), e.action(['emergency'])],
         toZigbee: [],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg', 'genTime', 'genBasic', 'ssIasAce', 'ssIasZone']);
+        },
     },
     {
         fingerprint: [{modelID: 'TS0215A', manufacturerName: '_TZ3000_p6ju8myv'},
@@ -1022,7 +1030,6 @@ module.exports = [
         fingerprint: [
             {modelID: 'TS0201', manufacturerName: '_TZ3000_bguser20'},
             {modelID: 'TS0201', manufacturerName: '_TZ3000_fllyghyj'},
-            {modelID: 'TS0201', manufacturerName: '_TZ3000_dowj6gyi'},
             {modelID: 'TS0201', manufacturerName: '_TZ3000_yd2e749y'},
             {modelID: 'TS0201', manufacturerName: '_TZ3000_6uzkisv2'},
         ],
@@ -1037,6 +1044,21 @@ module.exports = [
             await endpoint.read('genBasic', ['manufacturerName', 'zclVersion', 'appVersion', 'modelId', 'powerSource', 0xfffe]);
         },
     },
+    {
+        fingerprint: [
+            {modelID: 'TS0201', manufacturerName: '_TZ3000_dowj6gyi'},
+        ],
+        model: 'IH-K009',
+        vendor: 'TuYa',
+        description: 'Temperature & humidity sensor',
+        fromZigbee: [fzLocal.TS0201_battery, fz.temperature, fz.humidity],
+        toZigbee: [],
+        exposes: [e.battery(), e.temperature(), e.humidity(), e.battery_voltage()],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await endpoint.read('genBasic', ['manufacturerName', 'zclVersion', 'appVersion', 'modelId', 'powerSource', 0xfffe]);
+        },
+    },
     {
         fingerprint: [{modelID: 'SM0201', manufacturerName: '_TYZB01_cbiezpds'}],
         model: 'SM0201',

package/devices/xiaomi.js

@@ -1313,7 +1313,7 @@ module.exports = [
                 'the normal monitoring state, the green indicator light flashes every 60 seconds'),
             exposes.binary('linkage_alarm', ea.ALL, true, false).withDescription('When this option is enabled and a smoke ' +
                 'is detected, other detectors with this option enabled will also sound the alarm buzzer'),
-            e.device_temperature(), e.battery(), e.battery_voltage(), e.power_outage_count(false)],
+            e.battery(), e.battery_voltage(), e.power_outage_count(false)],
         meta: {battery: {voltageToPercentage: '3V_2850_3200'}},
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);

package/lib/exposes.js

@@ -372,7 +372,7 @@ class Climate extends Base {
 
     withSetpoint(property, min, max, step, access=a.ALL) {
         assert(!this.endpoint, 'Cannot add feature after adding endpoint');
-        assert(['occupied_heating_setpoint', 'current_heating_setpoint', 'occupied_cooling_setpoint'].includes(property));
+        assert(['occupied_heating_setpoint', 'current_heating_setpoint', 'occupied_cooling_setpoint', 'unoccupied_heating_setpoint', 'unoccupied_cooling_setpoint'].includes(property));
         this.features.push(new Numeric(property, access)
             .withValueMin(min).withValueMax(max).withValueStep(step).withUnit('°C').withDescription('Temperature setpoint'));
         return this;

package/lib/ota/ubisys.js

@@ -1,5 +1,5 @@
-const firmwareHtmlPageUrl = 'https://www.ubisys.de/en/support/firmware/';
-const imageRegex = /[^"\s]*\/10F2-([0-9a-f]{4})-([0-9a-f]{4})-([0-9a-f]{4})-([0-9a-f]{8})\S*ota1?\.zigbee/gi;
+const firmwareHtmlPageUrl = 'http://fwu.ubisys.de/smarthome/OTA/release/index';
+const imageRegex = /10F2-([0-9a-f]{4})-([0-9a-f]{4})-([0-9a-f]{4})-([0-9a-f]{8})\S*ota1?\.zigbee/gi;
 const assert = require('assert');
 const url = require('url');
 const common = require('./common');

package/lib/reporting.js

@@ -94,6 +94,10 @@ module.exports = {
         const p = payload('measuredValue', 10, repInterval.HOUR, 100, overrides);
         await endpoint.configureReporting('msTemperatureMeasurement', p);
     },
+    co2: async (endpoint, overrides) => {
+        const p = payload('measuredValue', 10, repInterval.HOUR, 1, overrides);
+        await endpoint.configureReporting('msCO2', p);
+    },
     deviceTemperature: async (endpoint, overrides) => {
         const p = payload('currentTemperature', 300, repInterval.HOUR, 1, overrides);
         await endpoint.configureReporting('genDeviceTempCfg', p);

package/lib/xiaomi.js

@@ -158,10 +158,11 @@ const numericAttributes2Payload = (msg, meta, model, options, dataObject) => {
             }
             break;
         case '3':
-            if (['WXCJKG11LM', 'WXCJKG12LM', 'WXCJKG13LM', 'MCCGQ14LM', 'GZCGQ01LM'].includes(model.model)) {
+            if (['WXCJKG11LM', 'WXCJKG12LM', 'WXCJKG13LM', 'MCCGQ14LM', 'GZCGQ01LM', 'JY-GZ-01AQ'].includes(model.model)) {
                 // The temperature value is constant 25 °C and does not change, so we ignore it
                 // https://github.com/Koenkk/zigbee2mqtt/issues/11126
                 // https://github.com/Koenkk/zigbee-herdsman-converters/pull/3585
+                // https://github.com/Koenkk/zigbee2mqtt/issues/13253
             } else {
                 payload.device_temperature = calibrateAndPrecisionRoundOptions(value, options, 'device_temperature'); // 0x03
             }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "14.0.574",
+  "version": "14.0.577",
   "description": "Collection of device converters to be used with zigbee-herdsman",
   "main": "index.js",
   "files": [