zigbee-herdsman-converters 14.0.564 → 14.0.565

package/converters/toZigbee.js

@@ -2167,7 +2167,8 @@ const converters = {
         convertSet: async (entity, key, value, meta) => {
             if (['SP-EUC01', 'ZNCZ04LM', 'ZNCZ15LM', 'QBCZ14LM', 'QBCZ15LM', 'SSM-U01', 'SSM-U02', 'DLKZMK11LM', 'DLKZMK12LM',
                 'WS-EUK01', 'WS-EUK02', 'WS-EUK03', 'WS-EUK04', 'QBKG19LM', 'QBKG20LM', 'QBKG25LM', 'QBKG26LM',
-                'QBKG31LM', 'QBKG34LM', 'QBKG38LM', 'QBKG39LM', 'QBKG40LM', 'QBKG41LM', 'ZNDDMK11LM'].includes(meta.mapped.model)) {
+                'QBKG31LM', 'QBKG34LM', 'QBKG38LM', 'QBKG39LM', 'QBKG40LM', 'QBKG41LM', 'ZNDDMK11LM', 'ZNLDP13LM',
+            ].includes(meta.mapped.model)) {
                 await entity.write('aqaraOpple', {0x0201: {value: value ? 1 : 0, type: 0x10}}, manufacturerOptions.xiaomi);
             } else if (['ZNCZ02LM', 'QBCZ11LM', 'LLKZMK11LM'].includes(meta.mapped.model)) {
                 const payload = value ?
@@ -2190,7 +2191,8 @@ const converters = {
         convertGet: async (entity, key, meta) => {
             if (['SP-EUC01', 'ZNCZ04LM', 'ZNCZ15LM', 'QBCZ14LM', 'QBCZ15LM', 'SSM-U01', 'SSM-U02', 'DLKZMK11LM', 'DLKZMK12LM',
                 'WS-EUK01', 'WS-EUK02', 'WS-EUK03', 'WS-EUK04', 'QBKG19LM', 'QBKG20LM', 'QBKG25LM', 'QBKG26LM',
-                'QBKG31LM', 'QBKG34LM', 'QBKG38LM', 'QBKG39LM', 'QBKG40LM', 'QBKG41LM', 'ZNDDMK11LM'].includes(meta.mapped.model)) {
+                'QBKG31LM', 'QBKG34LM', 'QBKG38LM', 'QBKG39LM', 'QBKG40LM', 'QBKG41LM', 'ZNDDMK11LM', 'ZNLDP13LM',
+            ].includes(meta.mapped.model)) {
                 await entity.read('aqaraOpple', [0x0201]);
             } else if (['ZNCZ02LM', 'QBCZ11LM', 'ZNCZ11LM'].includes(meta.mapped.model)) {
                 await entity.read('aqaraOpple', [0xFFF0]);
@@ -3582,6 +3584,9 @@ const converters = {
             await entity.write('genOnOff', {moesStartUpOnOff: payload});
             return {state: {power_outage_memory: value}};
         },
+        convertGet: async (entity, key, meta) => {
+            await entity.read('genOnOff', ['moesStartUpOnOff']);
+        },
     },
     moes_power_on_behavior: {
         key: ['power_on_behavior'],

package/devices/acova.js

@@ -64,7 +64,8 @@ module.exports = [
         },
     },
     {
-        zigbeeModel: ['TAFFETAS2 D1.00P1.02Z1.00'],
+        zigbeeModel: ['TAFFETAS2 D1.00P1.02Z1.00\u0000\u0000\u0000\u0000\u0000\u0000\u0000',
+            'TAFFETAS2 D1.00P1.01Z1.00\u0000\u0000\u0000\u0000\u0000\u0000\u0000'],
         model: 'TAFFETAS2',
         vendor: 'Acova',
         description: 'Taffetas 2 heater',

package/devices/adeo.js

@@ -22,6 +22,13 @@ module.exports = [
             }
         },
     },
+    {
+        zigbeeModel: ['ZBEK-8'],
+        model: 'IG-CDZFB2G009RA-MZN-02',
+        vendor: 'ADEO',
+        description: 'ENKI LEXMAN E27 LED white filament 1055 lumen',
+        extend: extend.light_onoff_brightness_colortemp({colorTempRange: [153, 454]}),
+    },
     {
         zigbeeModel: ['ZBEK-4'],
         model: 'IM-CDZDGAAA0005KA_MAN',

package/devices/custom_devices_diy.js

@@ -3,8 +3,11 @@ const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/lega
 const tz = require('../converters/toZigbee');
 const reporting = require('../lib/reporting');
 const extend = require('../lib/extend');
+const constants = require('../lib/constants');
 const e = exposes.presets;
 const ea = exposes.access;
+const {calibrateAndPrecisionRoundOptions} = require('../lib/utils');
+
 
 const tzLocal = {
     node_config: {
@@ -21,6 +24,62 @@ const tzLocal = {
             };
         },
     },
+    local_time: {
+        key: ['local_time'],
+        convertSet: async (entity, key, value, meta) => {
+            const firstEndpoint = meta.device.getEndpoint(1);
+            const time = Math.round(((new Date()).getTime() - constants.OneJanuary2000) / 1000 + ((new Date())
+                .getTimezoneOffset() * -1) * 60);
+            await firstEndpoint.write('genTime', {time: time});
+            return {state: {local_time: time}};
+        },
+    },
+    co2_config: {
+        key: ['auto_brightness', 'forced_recalibration', 'factory_reset_co2', 'long_chart_period', 'set_altitude',
+            'manual_forced_recalibration'],
+        convertSet: async (entity, key, rawValue, meta) => {
+            const lookup = {'OFF': 0x00, 'ON': 0x01};
+            const value = lookup.hasOwnProperty(rawValue) ? lookup[rawValue] : parseInt(rawValue, 10);
+            const payloads = {
+                auto_brightness: ['msCO2', {0x0203: {value, type: 0x10}}],
+                forced_recalibration: ['msCO2', {0x0202: {value, type: 0x10}}],
+                factory_reset_co2: ['msCO2', {0x0206: {value, type: 0x10}}],
+                long_chart_period: ['msCO2', {0x0204: {value, type: 0x10}}],
+                set_altitude: ['msCO2', {0x0205: {value, type: 0x21}}],
+                manual_forced_recalibration: ['msCO2', {0x0207: {value, type: 0x21}}],
+            };
+            await entity.write(payloads[key][0], payloads[key][1]);
+            return {
+                state: {[key]: rawValue},
+            };
+        },
+    },
+    temperature_config: {
+        key: ['temperature_offset'],
+        convertSet: async (entity, key, rawValue, meta) => {
+            const value = parseInt(rawValue, 10);
+            const payloads = {
+                temperature_offset: ['msTemperatureMeasurement', {0x0210: {value, type: 0x29}}],
+            };
+            await entity.write(payloads[key][0], payloads[key][1]);
+            return {
+                state: {[key]: rawValue},
+            };
+        },
+    },
+    humidity_config: {
+        key: ['humidity_offset'],
+        convertSet: async (entity, key, rawValue, meta) => {
+            const value = parseInt(rawValue, 10);
+            const payloads = {
+                humidity_offset: ['msRelativeHumidity', {0x0210: {value, type: 0x29}}],
+            };
+            await entity.write(payloads[key][0], payloads[key][1]);
+            return {
+                state: {[key]: rawValue},
+            };
+        },
+    },
 };
 
 const fzLocal = {
@@ -35,6 +94,64 @@ const fzLocal = {
             return result;
         },
     },
+    co2: {
+        cluster: 'msCO2',
+        type: ['attributeReport', 'readResponse'],
+        convert: (model, msg, publish, options, meta) => {
+            if (msg.data.hasOwnProperty('measuredValue')) {
+                const co2 = msg.data['measuredValue'];
+                return {co2: calibrateAndPrecisionRoundOptions(co2, options, 'co2')};
+            }
+        },
+    },
+    co2_config: {
+        cluster: 'msCO2',
+        type: ['attributeReport', 'readResponse'],
+        convert: (model, msg, publish, options, meta) => {
+            const result = {};
+            if (msg.data.hasOwnProperty(0x0203)) {
+                result.auto_brightness = ['OFF', 'ON'][msg.data[0x0203]];
+            }
+            if (msg.data.hasOwnProperty(0x0202)) {
+                result.forced_recalibration = ['OFF', 'ON'][msg.data[0x0202]];
+            }
+            if (msg.data.hasOwnProperty(0x0206)) {
+                result.factory_reset_co2 = ['OFF', 'ON'][msg.data[0x0206]];
+            }
+            if (msg.data.hasOwnProperty(0x0204)) {
+                result.long_chart_period = ['OFF', 'ON'][msg.data[0x0204]];
+            }
+            if (msg.data.hasOwnProperty(0x0205)) {
+                result.set_altitude = msg.data[0x0205];
+            }
+            if (msg.data.hasOwnProperty(0x0207)) {
+                result.manual_forced_recalibration = msg.data[0x0207];
+            }
+            return result;
+        },
+    },
+    temperature_config: {
+        cluster: 'msTemperatureMeasurement',
+        type: 'readResponse',
+        convert: (model, msg, publish, options, meta) => {
+            const result = {};
+            if (msg.data.hasOwnProperty(0x0210)) {
+                result.temperature_offset = msg.data[0x0210];
+            }
+            return result;
+        },
+    },
+    humidity_config: {
+        cluster: 'msRelativeHumidity',
+        type: 'readResponse',
+        convert: (model, msg, publish, options, meta) => {
+            const result = {};
+            if (msg.data.hasOwnProperty(0x0210)) {
+                result.humidity_offset = msg.data[0x0210];
+            }
+            return result;
+        },
+    },
 };
 
 module.exports = [
@@ -444,4 +561,64 @@ module.exports = [
         },
         exposes: [e.battery(), e.temperature(), e.humidity()],
     },
+    {
+        zigbeeModel: ['EFEKTA_iAQ'],
+        model: 'EFEKTA_iAQ',
+        vendor: 'Custom devices (DiY)',
+        description: '[CO2 Monitor with IPS TFT Display, outdoor temperature and humidity, date and time](http://efektalab.com/iAQ)',
+        fromZigbee: [fz.temperature, fz.humidity, fz.illuminance, fzLocal.co2, fzLocal.co2_config,
+            fzLocal.temperature_config, fzLocal.humidity_config],
+        toZigbee: [tz.factory_reset, tzLocal.co2_config, tzLocal.temperature_config, tzLocal.humidity_config, tzLocal.local_time],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            const clusters = ['msTemperatureMeasurement', 'msRelativeHumidity', 'msIlluminanceMeasurement', 'msCO2'];
+            await reporting.bind(endpoint, coordinatorEndpoint, clusters);
+            for (const cluster of clusters) {
+                await endpoint.configureReporting(cluster, [
+                    {attribute: 'measuredValue', minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0},
+                ]);
+            }
+            const payload1 = [{attribute: {ID: 0x0203, type: 0x10},
+                minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0}];
+            await endpoint.configureReporting('msCO2', payload1);
+            const payload2 = [{attribute: {ID: 0x0202, type: 0x10},
+                minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0}];
+            await endpoint.configureReporting('msCO2', payload2);
+            const payload3 = [{attribute: {ID: 0x0204, type: 0x10},
+                minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0}];
+            await endpoint.configureReporting('msCO2', payload3);
+            const payload4 = [{attribute: {ID: 0x0205, type: 0x21},
+                minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0}];
+            await endpoint.configureReporting('msCO2', payload4);
+            const payload5 = [{attribute: {ID: 0x0206, type: 0x10},
+                minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0}];
+            await endpoint.configureReporting('msCO2', payload5);
+            const payload6 = [{attribute: {ID: 0x0207, type: 0x21},
+                minimumReportInterval: 0, maximumReportInterval: 3600, reportableChange: 0}];
+            await endpoint.configureReporting('msCO2', payload6);
+            const time = Math.round(((new Date()).getTime() - constants.OneJanuary2000) / 1000 + ((new Date())
+                .getTimezoneOffset() * -1) * 60);
+            const values = {time: time};
+            endpoint.write('genTime', values);
+        },
+        exposes: [e.co2(), e.temperature(), e.humidity(), e.illuminance(),
+            exposes.binary('auto_brightness', ea.STATE_SET, 'ON', 'OFF')
+                .withDescription('Enable or Disable Auto Brightness of the Display'),
+            exposes.binary('long_chart_period', ea.STATE_SET, 'ON', 'OFF')
+                .withDescription('The period of plotting the CO2 level(OFF - 1H | ON - 24H)'),
+            exposes.numeric('set_altitude', ea.STATE_SET).withUnit('meters')
+                .withDescription('Setting the altitude above sea level (for high accuracy of the CO2 sensor)')
+                .withValueMin(0).withValueMax(3000),
+            exposes.enum('local_time', ea.STATE_SET, ['set']).withDescription('Set date and time'),
+            exposes.numeric('temperature_offset', ea.STATE_SET).withUnit('°C').withDescription('Adjust temperature')
+                .withValueMin(-30).withValueMax(60),
+            exposes.numeric('humidity_offset', ea.STATE_SET).withUnit('%').withDescription('Adjust humidity')
+                .withValueMin(0).withValueMax(99),
+            exposes.binary('forced_recalibration', ea.STATE_SET, 'ON', 'OFF')
+                .withDescription('Start FRC (Perform Forced Recalibration of the CO2 Sensor)'),
+            exposes.binary('factory_reset_co2', ea.STATE_SET, 'ON', 'OFF').withDescription('Factory Reset CO2 sensor'),
+            exposes.numeric('manual_forced_recalibration', ea.STATE_SET).withUnit('ppm')
+                .withDescription('Start Manual FRC (Perform Forced Recalibration of the CO2 Sensor)')
+                .withValueMin(0).withValueMax(5000)],
+    },
 ];

package/devices/gledopto.js

@@ -348,7 +348,7 @@ module.exports = [
         model: 'GL-S-004Z',
         vendor: 'Gledopto',
         description: 'Zigbee 4W MR16 Bulb 30deg RGB+CCT',
-        extend: gledoptoExtend.light_onoff_brightness_colortemp_color({disableColorTempStartup: false}),
+        extend: gledoptoExtend.light_onoff_brightness_colortemp_color({disableColorTempStartup: false, colorTempRange: [155, 495]}),
     },
     {
         zigbeeModel: ['GL-S-005Z'],

package/devices/immax.js

@@ -8,6 +8,16 @@ const e = exposes.presets;
 const ea = exposes.access;
 
 module.exports = [
+    {
+
+        zigbeeModel: ['Motion-Sensor-ZB3.0'],
+        model: '07043M',
+        vendor: 'Immax',
+        description: 'Motion sensor',
+        fromZigbee: [fz.ias_occupancy_alarm_1, fz.battery],
+        toZigbee: [],
+        exposes: [e.occupancy(), e.battery_low(), e.tamper(), e.battery()],
+    },
     {
         zigbeeModel: ['ZBT-CCTfilament-D0000'],
         model: '07089L',

package/devices/lellki.js

@@ -42,7 +42,7 @@ module.exports = [
             const endpoint = device.getEndpoint(1);
             await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff']);
         },
-        exposes: [e.switch(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+        exposes: [e.switch(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
             .withDescription('Recover state after power outage')],
     },
     {
@@ -102,7 +102,7 @@ module.exports = [
         },
         options: [exposes.options.measurement_poll_interval()],
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage')],
         onEvent: tuya.onEventMeasurementPoll,
     },
@@ -122,7 +122,7 @@ module.exports = [
         },
         options: [exposes.options.measurement_poll_interval()],
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage')],
         onEvent: tuya.onEventMeasurementPoll,
     },
@@ -146,7 +146,7 @@ module.exports = [
         options: [exposes.options.measurement_poll_interval()],
         exposes: [e.switch().withEndpoint('l1'), e.switch().withEndpoint('l2'),
             e.switch().withEndpoint('l3'), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage')],
         endpoint: (device) => {
             return {l1: 1, l2: 2, l3: 3};

package/devices/linkind.js

@@ -68,12 +68,19 @@ module.exports = [
         extend: extend.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}),
     },
     {
-        zigbeeModel: ['ZBT-CCTLight-C4700107', 'ZBT-CCTLight-M3500107'],
+        zigbeeModel: ['ZBT-CCTLight-C4700107'],
         model: 'ZL1000400-CCT-EU-2-V1A02',
         vendor: 'Linkind',
         description: 'Zigbee LED 5.4W C35 bulb E14, dimmable & tunable',
         extend: extend.light_onoff_brightness_colortemp(),
     },
+    {
+        zigbeeModel: ['ZBT-CCTLight-M3500107'],
+        model: 'ZL00030014',
+        vendor: 'Linkind',
+        description: 'Zigbee LED 4.8W GU10 bulb, dimmable & tunable',
+        extend: extend.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}),
+    },
     {
         zigbeeModel: ['ZBT-CCTLight-BR300107'],
         model: 'ZL100050004',

package/devices/lonsonho.js

@@ -267,7 +267,7 @@ module.exports = [
         exposes: [
             e.light_brightness().withEndpoint('l1'),
             e.light_brightness().withEndpoint('l2'),
-            exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore']).withDescription('Recover state after power outage')
+            exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore']).withDescription('Recover state after power outage')
                 .withEndpoint('l1'),
             exposes.presets.switch_type_2().withEndpoint('l1'),
             exposes.presets.switch_type_2().withEndpoint('l2'),

package/devices/moes.js

@@ -22,7 +22,7 @@ module.exports = [
         fromZigbee: [fz.on_off, fz.tuya_switch_power_outage_memory, fz.ts011f_plug_child_mode],
         toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory, tz.ts011f_plug_child_mode],
         exposes: [e.switch().withEndpoint('l1'), e.switch().withEndpoint('l2'),
-            exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage'), e.child_lock()],
         endpoint: (device) => {
             return {'l1': 1, 'l2': 2};

package/devices/philips.js

@@ -55,6 +55,13 @@ module.exports = [
         description: 'Hue White and Color Ambiance GU10 (Centura)',
         extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
     },
+    {
+        zigbeeModel: ['929003045201_01', '929003045201_02', '929003045201_03'],
+        model: '929003045201',
+        vendor: 'Philips',
+        description: 'Hue White and Color Ambiance GU10 (Centura round white)',
+        extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
+    },
     {
         zigbeeModel: ['929003047401'],
         model: '929003047401',
@@ -426,6 +433,13 @@ module.exports = [
         description: 'Hue Calla outdoor',
         extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
     },
+    {
+        zigbeeModel: ['929003098601'],
+        model: '929003098601',
+        vendor: 'Philips',
+        description: 'Hue Calla outdoor Pedestal',
+        extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
+    },
     {
         zigbeeModel: ['1742330P7'],
         model: '1742330P7',

package/devices/tuya.js

@@ -440,7 +440,13 @@ module.exports = [
         model: 'ZN231392',
         vendor: 'TuYa',
         description: 'Smart water/gas valve',
-        extend: extend.switch(),
+        fromZigbee: extend.switch().fromZigbee.concat([fz.moes_power_on_behavior]),
+        toZigbee: extend.switch().toZigbee.concat([tz.moes_power_on_behavior]),
+        exposes: extend.switch().exposes.concat([e.power_on_behavior()]),
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await endpoint.read('genOnOff', ['onOff', 'moesStartUpOnOff']);
+        },
     },
     {
         fingerprint: [{modelID: 'TS011F', manufacturerName: '_TZ3000_1hwjutgo'}, {modelID: 'TS011F', manufacturerName: '_TZ3000_lnggrqqi'}],
@@ -1557,8 +1563,9 @@ module.exports = [
         description: '10A UK or 16A EU smart plug',
         whiteLabel: [{vendor: 'BlitzWolf', model: 'BW-SHP13'}],
         vendor: 'TuYa',
-        fromZigbee: [fz.on_off, fz.electrical_measurement, fz.metering, fz.ignore_basic_report, fz.tuya_switch_power_outage_memory],
-        toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory],
+        fromZigbee: [fz.on_off, fz.electrical_measurement, fz.metering, fz.ignore_basic_report, fz.tuya_switch_power_outage_memory,
+            fz.ts011f_plug_indicator_mode],
+        toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory, tz.ts011f_plug_indicator_mode],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
             await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement', 'seMetering']);
@@ -1570,21 +1577,31 @@ module.exports = [
             try {
                 await reporting.currentSummDelivered(endpoint);
             } catch (error) {/* fails for some https://github.com/Koenkk/zigbee2mqtt/issues/11179 */}
+            await endpoint.read('genOnOff', ['onOff', 'moesStartUpOnOff', 'tuyaBacklightMode']);
         },
         options: [exposes.options.measurement_poll_interval()],
         // This device doesn't support reporting correctly.
         // https://github.com/Koenkk/zigbee-herdsman-converters/pull/1270
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
-                .withDescription('Recover state after power outage')],
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
+                .withDescription('Recover state after power outage'),
+            exposes.enum('indicator_mode', ea.ALL, ['off', 'off/on', 'on/off']).withDescription('LED indicator mode')],
         onEvent: tuya.onEventMeasurementPoll,
     },
     {
         fingerprint: [{modelID: 'TS0111', manufacturerName: '_TYZB01_ymcdbl3u'}],
         model: 'TS0111_valve',
         vendor: 'TuYa',
+        whiteLabel: [{vendor: 'TuYa', model: 'SM-AW713Z'}],
         description: 'Smart water/gas valve',
-        extend: extend.switch(),
+        fromZigbee: extend.switch().fromZigbee.concat([fz.moes_power_on_behavior, fz.ts011f_plug_indicator_mode]),
+        toZigbee: extend.switch().toZigbee.concat([tz.moes_power_on_behavior, tz.ts011f_plug_indicator_mode]),
+        exposes: extend.switch().exposes.concat([e.power_on_behavior(),
+            exposes.enum('indicator_mode', ea.ALL, ['off', 'off/on', 'on/off', 'on']).withDescription('LED indicator mode')]),
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await endpoint.read('genOnOff', ['onOff', 'moesStartUpOnOff', 'tuyaBacklightMode']);
+        },
     },
     {
         fingerprint: TS011Fplugs.map((manufacturerName) => {
@@ -1613,7 +1630,7 @@ module.exports = [
             device.save();
         },
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage'),
             exposes.enum('indicator_mode', ea.ALL, ['off', 'off/on', 'on/off', 'on'])
                 .withDescription('Plug LED indicator mode'), e.child_lock()],
@@ -1634,7 +1651,7 @@ module.exports = [
             const endpoint = device.getEndpoint(1);
             await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff']);
         },
-        exposes: [e.switch(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+        exposes: [e.switch(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
             .withDescription('Recover state after power outage'),
         exposes.enum('indicator_mode', ea.ALL, ['off', 'off/on', 'on/off', 'on'])
             .withDescription('Plug LED indicator mode'), e.child_lock()],
@@ -1665,7 +1682,7 @@ module.exports = [
         },
         options: [exposes.options.measurement_poll_interval()],
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage'),
             exposes.enum('indicator_mode', ea.ALL, ['off', 'off/on', 'on/off', 'on'])
                 .withDescription('Plug LED indicator mode'), e.child_lock()],
@@ -2171,7 +2188,7 @@ module.exports = [
             device.save();
         },
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
-            e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            e.energy(), exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage'),
             exposes.enum('indicator_mode', ea.STATE_SET, ['off', 'on_off', 'off_on'])
                 .withDescription('Relay LED indicator mode')],
@@ -2189,7 +2206,7 @@ module.exports = [
             device.save();
         },
         exposes: [e.switch(),
-            exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage'),
             exposes.enum('indicator_mode', ea.STATE_SET, ['off', 'on_off', 'off_on'])
                 .withDescription('Relay LED indicator mode')],

package/devices/xiaomi.js

@@ -113,7 +113,21 @@ module.exports = [
         model: 'ZNLDP13LM',
         vendor: 'Xiaomi',
         description: 'Aqara T1 smart LED bulb',
-        extend: xiaomiExtend.light_onoff_brightness_colortemp({disableEffect: true, colorTempRange: [153, 370]}),
+        toZigbee: xiaomiExtend.light_onoff_brightness_colortemp({disableEffect: true, disablePowerOnBehavior: true}).toZigbee.concat([
+            tz.xiaomi_switch_power_outage_memory,
+        ]),
+        fromZigbee: xiaomiExtend.light_onoff_brightness_colortemp({disableEffect: true, disablePowerOnBehavior: true}).fromZigbee.concat([
+            fz.aqara_opple,
+        ]),
+        exposes: xiaomiExtend.light_onoff_brightness_colortemp({
+            disableEffect: true,
+            disablePowerOnBehavior: true,
+            colorTempRange: [153, 370],
+        }).exposes.concat([
+            e.power_outage_memory(),
+            e.device_temperature(),
+            e.power_outage_count(),
+        ]),
         ota: ota.zigbeeOTA,
     },
     {

package/devices/yale.js

@@ -10,7 +10,8 @@ const lockExtend = (meta) => {
             fz.lock_user_status_response],
         toZigbee: [tz.lock, tz.pincode_lock, tz.lock_userstatus],
         meta: {pinCodeCount: 250, ...meta},
-        exposes: [e.lock(), e.battery(), e.pincode(), e.lock_action(), e.lock_action_source_name(), e.lock_action_source_user()],
+        exposes: [e.lock(), e.battery(), e.pincode(), e.lock_action(), e.lock_action_source_name(), e.lock_action_source_user(),
+            e.lock_action_user()],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
             await reporting.bind(endpoint, coordinatorEndpoint, ['closuresDoorLock', 'genPowerCfg']);

package/devices/zemismart.js

@@ -137,7 +137,7 @@ module.exports = [
         fromZigbee: [fz.on_off, fz.tuya_switch_power_outage_memory],
         toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory],
         exposes: [e.switch().withEndpoint('l1'), e.switch().withEndpoint('l2'),
-            exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
+            exposes.enum('power_outage_memory', ea.ALL, ['on', 'off', 'restore'])
                 .withDescription('Recover state after power outage')],
         endpoint: (device) => {
             return {'l1': 1, 'l2': 2};

package/lib/exposes.js

@@ -574,6 +574,7 @@ module.exports = {
         lock_action: () => new Enum('action', access.STATE, ['unknown', 'lock', 'unlock', 'lock_failure_invalid_pin_or_id', 'lock_failure_invalid_schedule', 'unlock_failure_invalid_pin_or_id', 'unlock_failure_invalid_schedule', 'one_touch_lock', 'key_lock', 'key_unlock', 'auto_lock', 'schedule_lock', 'schedule_unlock', 'manual_lock', 'manual_unlock', 'non_access_user_operational_event']).withDescription('Triggered action on the lock'),
         lock_action_source_name: () => new Enum('action_source_name', access.STATE, ['keypad', 'rfid', 'manual', 'rf']).withDescription('Source of the triggered action on the lock'),
         lock_action_source_user: () => new Numeric('action_source_user', access.STATE).withDescription('ID of user that triggered the action on the lock'),
+        lock_action_user: () => new Numeric('action_user', access.STATE).withDescription('ID of user that triggered the action on the lock'),
         max_temperature: () => new Numeric('max_temperature', access.STATE_SET).withUnit('°C').withDescription('Maximum temperature').withValueMin(15).withValueMax(35),
         max_temperature_limit: () => new Numeric('max_temperature_limit', access.STATE_SET).withUnit('°C').withDescription('Maximum temperature limit').withValueMin(0).withValueMax(35),
         min_temperature: () => new Numeric('min_temperature', access.STATE_SET).withUnit('°C').withDescription('Minimum temperature').withValueMin(1).withValueMax(15),

package/lib/xiaomi.js

@@ -172,11 +172,25 @@ const numericAttributes2Payload = (msg, meta, model, options, dataObject) => {
         case '5':
             payload.power_outage_count = value - 1;
             break;
+        case '8':
+            if (['ZNLDP13LM'].includes(model.model)) {
+                // We don't know what the value means for these devices.
+            }
+            break;
+        case '9':
+            if (['ZNLDP13LM'].includes(model.model)) {
+                // We don't know what the value means for these devices.
+            }
+            break;
         case '10':
-            payload.switch_type = {1: 'toggle', 2: 'momentary'}[value];
+            if (['ZNLDP13LM'].includes(model.model)) {
+                // We don't know what the value means for these devices.
+            } else {
+                payload.switch_type = {1: 'toggle', 2: 'momentary'}[value];
+            }
             break;
         case '11':
-            if (['JT-BZ-01AQ/A', 'QBKG25LM'].includes(model.model)) {
+            if (['JT-BZ-01AQ/A', 'QBKG25LM', 'ZNLDP13LM'].includes(model.model)) {
                 // We don't know what the value means for these devices.
                 // https://github.com/Koenkk/zigbee2mqtt/issues/12451
             } else {
@@ -185,6 +199,11 @@ const numericAttributes2Payload = (msg, meta, model, options, dataObject) => {
                 payload.illuminance_lux = calibrateAndPrecisionRoundOptions(value, options, 'illuminance_lux');
             }
             break;
+        case '12':
+            if (['ZNLDP13LM'].includes(model.model)) {
+                // We don't know what the value means for these devices.
+            }
+            break;
         case '100':
             if (['QBKG20LM', 'QBKG31LM', 'QBKG39LM', 'QBKG41LM', 'QBCZ15LM', 'LLKZMK11LM', 'QBKG12LM', 'QBKG03LM', 'QBKG25LM']
                 .includes(model.model)) {
@@ -339,6 +358,11 @@ const numericAttributes2Payload = (msg, meta, model, options, dataObject) => {
                 payload.power = precisionRound(value, 2); // 0x98
             }
             break;
+        case '154':
+            if (['ZNLDP13LM'].includes(model.model)) {
+                // We don't know what the value means for these devices.
+            }
+            break;
         case '159':
             if (['JT-BZ-01AQ/A'].includes(model.model)) {
                 payload.gas_sensitivity = {1: '15%LEL', 2: '10%LEL'}[value];

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "14.0.564",
+  "version": "14.0.565",
   "description": "Collection of device converters to be used with zigbee-herdsman",
   "main": "index.js",
   "files": [