zigbee-herdsman-converters 14.0.516 → 14.0.517

package/devices/heiman.js

@@ -453,6 +453,15 @@ module.exports = [
         toZigbee: [],
         exposes: [e.gas(), e.battery_low(), e.tamper()],
     },
+    {
+        zigbeeModel: ['SGPHM-I1'],
+        model: 'SGPHM-I1',
+        vendor: 'HEIMAN',
+        description: 'Propane gas sensor',
+        fromZigbee: [fz.ias_gas_alarm_1],
+        toZigbee: [],
+        exposes: [e.gas(), e.battery_low(), e.tamper()],
+    },
     {
         fingerprint: [{modelID: 'Vibration-N', manufacturerName: 'HEIMAN'}],
         model: 'HS1VS-N',

package/devices/moes.js

@@ -118,7 +118,7 @@ module.exports = [
         onEvent: tuya.onEventSetLocalTime,
     },
     {
-        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_amp6tsvy'}],
+        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_amp6tsvy'}, {modelID: 'TS0601', manufacturerName: '_TZE200_tviaymwx'}],
         model: 'ZTS-EU_1gang',
         vendor: 'Moes',
         description: 'Wall touch light switch (1 gang)',

package/devices/philips.js

@@ -465,7 +465,7 @@ module.exports = [
         ota: ota.zigbeeOTA,
     },
     {
-        zigbeeModel: ['LCT026', '7602031P7', '7602031U7'],
+        zigbeeModel: ['LCT026', '7602031P7', '7602031U7', '7602031N6'],
         model: '7602031P7',
         vendor: 'Philips',
         description: 'Hue Go with Bluetooth',

package/devices/rademacher.js

@@ -0,0 +1,11 @@
+const extend = require('../lib/extend');
+
+module.exports = [
+    {
+        zigbeeModel: ['RDM-35104001'],
+        model: '35104001',
+        vendor: 'Rademacher',
+        description: 'addZ white + colour',
+        extend: extend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 555]}),
+    },
+];

package/devices/robb.js

@@ -7,6 +7,27 @@ const e = exposes.presets;
 const ea = exposes.access;
 
 module.exports = [
+    {
+        zigbeeModel: ['ROB_200-050-0'],
+        model: 'ROB_200-050-0',
+        vendor: 'ROBB',
+        description: '4 port switch with 2 usb ports (no metering)',
+        extend: extend.switch(),
+        exposes: [e.switch().withEndpoint('l1'), e.switch().withEndpoint('l2'), e.switch().withEndpoint('l3'),
+            e.switch().withEndpoint('l4'), e.switch().withEndpoint('l5')],
+        endpoint: (device) => {
+            return {'l1': 1, 'l2': 2, 'l3': 3, 'l4': 4, 'l5': 5};
+        },
+        meta: {multiEndpoint: true},
+        whiteLabel: [{vendor: 'Sunricher', model: 'SR-ZG9023A(EU)'}],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            await reporting.bind(device.getEndpoint(1), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(3), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(4), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(5), coordinatorEndpoint, ['genOnOff']);
+        },
+    },
     {
         zigbeeModel: ['ROB_200-006-0'],
         model: 'ROB_200-006-0',

package/devices/sunricher.js

@@ -6,6 +6,26 @@ const extend = require('../lib/extend');
 const e = exposes.presets;
 
 module.exports = [
+    {
+        zigbeeModel: ['SR-ZG9023A-EU'],
+        model: 'SR-ZG9023A-EU',
+        vendor: 'Sunricher',
+        description: '4 ports switch with 2 usb ports (no metering)',
+        extend: extend.switch(),
+        exposes: [e.switch().withEndpoint('l1'), e.switch().withEndpoint('l2'),
+            e.switch().withEndpoint('l3'), e.switch().withEndpoint('l4'), e.switch().withEndpoint('l5')],
+        endpoint: (device) => {
+            return {'l1': 1, 'l2': 2, 'l3': 3, 'l4': 4, 'l5': 5};
+        },
+        meta: {multiEndpoint: true},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            await reporting.bind(device.getEndpoint(1), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(3), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(4), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(5), coordinatorEndpoint, ['genOnOff']);
+        },
+    },
     {
         zigbeeModel: ['ON/OFF(2CH)'],
         model: 'UP-SA-9127D',

package/devices/tuya.js

@@ -13,7 +13,8 @@ const utils = require('../lib/utils');
 const TS011Fplugs = ['_TZ3000_5f43h46b', '_TZ3000_cphmq0q7', '_TZ3000_dpo1ysak', '_TZ3000_ew3ldmgx', '_TZ3000_gjnozsaz',
     '_TZ3000_jvzvulen', '_TZ3000_mraovvmm', '_TZ3000_nfnmi125', '_TZ3000_ps3dmato', '_TZ3000_w0qqde0g', '_TZ3000_u5u4cakc',
     '_TZ3000_rdtixbnu', '_TZ3000_typdpbpg', '_TZ3000_kx0pris5', '_TZ3000_amdymr7l', '_TZ3000_z1pnpsdo', '_TZ3000_ksw8qtmt',
-    '_TZ3000_nzkqcvvs', '_TZ3000_1h2x4akh', '_TZ3000_9vo5icau', '_TZ3000_cehuw1lw', '_TZ3000_ko6v90pg', '_TZ3000_f1bapcit'];
+    '_TZ3000_nzkqcvvs', '_TZ3000_1h2x4akh', '_TZ3000_9vo5icau', '_TZ3000_cehuw1lw', '_TZ3000_ko6v90pg', '_TZ3000_f1bapcit',
+    '_TZ3000_cjrngdr3', '_TZ3000_zloso4jk'];
 
 const tzLocal = {
     TS0504B_color: {
@@ -715,6 +716,8 @@ module.exports = [
             {modelID: 'TS0502B', manufacturerName: '_TZ3210_pgq2qvyv'},
             {modelID: 'TS0502B', manufacturerName: '_TZ3210_nvaik6gk'},
             {modelID: 'TS0502B', manufacturerName: '_TZ3000_armwcncd'},
+            {modelID: 'TS0502B', manufacturerName: '_TZ3210_2p6wbry3'},
+            {modelID: 'TS0502B', manufacturerName: '_TZ3210_qamcypen'},
         ],
         model: 'TS0502B',
         vendor: 'TuYa',
@@ -950,6 +953,8 @@ module.exports = [
         },
         meta: {multiEndpoint: true},
         configure: async (device, coordinatorEndpoint, logger) => {
+            const ep1 = device.getEndpoint(1);
+            await ep1.read('genBasic', ['manufacturerName', 'zclVersion', 'appVersion', 'modelId', 'powerSource', 0xfffe]);
             await reporting.bind(device.getEndpoint(1), coordinatorEndpoint, ['genOnOff']);
             await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
         },

package/devices/ubisys.js

@@ -16,10 +16,11 @@ module.exports = [
             e.action([
                 'toggle', 'on', 'off', 'recall_*',
                 'brightness_move_up', 'brightness_move_down', 'brightness_stop',
-            ])],
+            ]),
+            e.power_on_behavior()],
         fromZigbee: [fz.on_off, fz.metering, fz.command_toggle, fz.command_on, fz.command_off, fz.command_recall, fz.command_move,
-            fz.command_stop],
-        toZigbee: [tz.on_off, tz.metering_power, tz.ubisys_device_setup],
+            fz.command_stop, fz.power_on_behavior],
+        toZigbee: [tz.on_off, tz.metering_power, tz.ubisys_device_setup, tz.power_on_behavior],
         endpoint: (device) => {
             return {'l1': 1, 's1': 2, 'meter': 3};
         },
@@ -57,10 +58,11 @@ module.exports = [
             e.action([
                 'toggle', 'on', 'off', 'recall_*',
                 'brightness_move_up', 'brightness_move_down', 'brightness_stop',
-            ])],
+            ]),
+            e.power_on_behavior()],
         fromZigbee: [fz.on_off, fz.metering, fz.command_toggle, fz.command_on, fz.command_off, fz.command_recall, fz.command_move,
-            fz.command_stop],
-        toZigbee: [tz.on_off, tz.metering_power, tz.ubisys_device_setup],
+            fz.command_stop, fz.power_on_behavior],
+        toZigbee: [tz.on_off, tz.metering_power, tz.ubisys_device_setup, tz.power_on_behavior],
         endpoint: (device) => {
             return {'l1': 1, 's1': 2, 'meter': 4};
         },
@@ -99,10 +101,11 @@ module.exports = [
             e.power().withAccess(ea.STATE_GET).withEndpoint('meter').withProperty('power'),
             e.action(['toggle_s1', 'toggle_s2', 'on_s1', 'on_s2', 'off_s1', 'off_s2', 'recall_*_s1', 'recal_*_s2', 'brightness_move_up_s1',
                 'brightness_move_up_s2', 'brightness_move_down_s1', 'brightness_move_down_s2', 'brightness_stop_s1',
-                'brightness_stop_s2'])],
+                'brightness_stop_s2']),
+            e.power_on_behavior().withEndpoint('l1'), e.power_on_behavior().withEndpoint('l2')],
         fromZigbee: [fz.on_off, fz.metering, fz.command_toggle, fz.command_on, fz.command_off, fz.command_recall, fz.command_move,
-            fz.command_stop],
-        toZigbee: [tz.on_off, tz.metering_power, tz.ubisys_device_setup],
+            fz.command_stop, fz.power_on_behavior],
+        toZigbee: [tz.on_off, tz.metering_power, tz.ubisys_device_setup, tz.power_on_behavior],
         endpoint: (device) => {
             return {'l1': 1, 'l2': 2, 's1': 3, 's2': 4, 'meter': 5};
         },

package/devices/xiaomi.js

@@ -1344,7 +1344,7 @@ module.exports = [
             exposes.binary('running', ea.STATE, true, false)
                 .withDescription('Whether the motor is moving or not'),
             exposes.enum('motor_state', ea.STATE, ['closing', 'opening', 'stop'])
-                .withDescription('The current state of the motor.')],
+                .withDescription('The current state of the motor.'), e.power_outage_count()],
         ota: ota.zigbeeOTA,
     },
     {
@@ -1580,6 +1580,7 @@ module.exports = [
             device.type = 'Router';
             device.save();
         },
+        ota: ota.zigbeeOTA,
     },
     {
         zigbeeModel: ['lumi.switch.n0acn2'],

package/lib/xiaomi.js

@@ -154,7 +154,7 @@ const numericAttributes2Payload = (msg, meta, model, options, dataObject) => {
             break;
         case '2':
             if (['JT-BZ-01AQ/A'].includes(model.model)) {
-                payload.power_outage_count = value;
+                payload.power_outage_count = value - 1;
             }
             break;
         case '3':
@@ -168,8 +168,8 @@ const numericAttributes2Payload = (msg, meta, model, options, dataObject) => {
             payload.mode_switch = {4: 'anti_flicker_mode', 1: 'quick_mode'}[value];
             break;
         case '5':
-            if (['Mains (single phase)', 'DC Source'].includes(meta.device.powerSource)) {
-                payload.power_outage_count = value;
+            if (['Mains (single phase)', 'DC Source'].includes(meta.device.powerSource) || ['ZNCLDJ12LM'].includes(model.model)) {
+                payload.power_outage_count = value - 1;
             }
             break;
         case '10':

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "14.0.516",
+  "version": "14.0.517",
   "description": "Collection of device converters to be used with zigbee-herdsman",
   "main": "index.js",
   "files": [
@@ -38,7 +38,7 @@
     "buffer-crc32": "^0.2.13",
     "https-proxy-agent": "^5.0.1",
     "tar-stream": "^2.2.0",
-    "zigbee-herdsman": "^0.14.28"
+    "zigbee-herdsman": "^0.14.30"
   },
   "devDependencies": {
     "eslint": "*",