zigbee-herdsman-converters 14.0.508 → 14.0.511

package/converters/fromZigbee.js

@@ -1693,10 +1693,10 @@ const converters = {
                 result.temperature_display = lookup[data[0x1008]];
             }
             if (data.hasOwnProperty(0x1009)) { // WindowOpenCheck
-                result.window_open_check = data[0x1009];
+                result.window_open_check = data[0x1009] / 2;
             }
             if (data.hasOwnProperty(0x100A)) { // Hysterersis
-                result.hysterersis = data[0x100A];
+                result.hysterersis = precisionRound(data[0x100A], 2) / 10;
             }
             if (data.hasOwnProperty(0x100B)) { // DisplayAutoOffEnable
                 const lookup = {0: 'enable', 1: 'disable'};
@@ -5408,7 +5408,7 @@ const converters = {
                     payload.device_mode = 'unknown';
                 }
             }
-            if (msg.data.hasOwnProperty('1')) payload.permanent_led = msg.data['1'] === 0x00 ? 'OFF' : 'ON';
+            if (msg.data.hasOwnProperty('1')) payload.led_when_off = msg.data['1'] === 0x00 ? 'OFF' : 'ON';
             if (msg.data.hasOwnProperty('2')) payload.led_when_on = msg.data['2'] === 0x00 ? 'OFF' : 'ON';
             return payload;
         },
@@ -7191,6 +7191,22 @@ const converters = {
             }
         },
     },
+    tuya_relay_din_led_indicator: {
+        cluster: 'genOnOff',
+        type: ['attributeReport', 'readResponse'],
+        convert: (model, msg, publish, options, meta) => {
+            const property = 0x8001;
+
+            if (msg.data.hasOwnProperty(property)) {
+                const dict = {0x00: 'off', 0x01: 'on_off', 0x02: 'off_on'};
+                const value = msg.data[property];
+
+                if (dict.hasOwnProperty(value)) {
+                    return {[postfixWithEndpointName('indicator_mode', msg, model)]: dict[value]};
+                }
+            }
+        },
+    },
     ias_keypad: {
         cluster: 'ssIasZone',
         type: 'commandStatusChangeNotification',

package/converters/toZigbee.js

@@ -2531,12 +2531,24 @@ const converters = {
             return {state: {power_outage_memory: value}};
         },
     },
+    tuya_relay_din_led_indicator: {
+        key: ['indicator_mode'],
+        convertSet: async (entity, key, value, meta) => {
+            value = value.toLowerCase();
+            const lookup = {'off': 0x00, 'on_off': 0x01, 'off_on': 0x02};
+            utils.validateValue(value, Object.keys(lookup));
+            const payload = lookup[value];
+            await entity.write('genOnOff', {0x8001: {value: payload, type: 0x30}});
+            return {state: {indicator_mode: value}};
+        },
+    },
     kmpcil_res005_on_off: {
         key: ['state'],
         convertSet: async (entity, key, value, meta) => {
             const options = {disableDefaultResponse: true};
+            value = value.toLowerCase();
             utils.validateValue(value, ['toggle', 'off', 'on']);
-            if (value.toLowerCase() === 'toggle') {
+            if (value === 'toggle') {
                 if (!meta.state.hasOwnProperty('state')) {
                     throw new Error('Cannot toggle, state not known yet');
                 } else {
@@ -3062,10 +3074,10 @@ const converters = {
                 const payload = {0x1008: {value: lookup[value], type: herdsman.Zcl.DataType.enum8}};
                 await entity.write('hvacThermostat', payload, manufacturerOptions.sunricher);
             } else if (key==='window_open_check') {
-                const payload = {0x1009: {value: Math.round(value * 10), type: 0x20}};
+                const payload = {0x1009: {value: value * 2, type: 0x20}};
                 await entity.write('hvacThermostat', payload, manufacturerOptions.sunricher);
             } else if (key==='hysterersis') {
-                const payload = {0x100A: {value: Math.round(value * 10), type: 0x20}};
+                const payload = {0x100A: {value: value* 10, type: 0x20}};
                 await entity.write('hvacThermostat', payload, manufacturerOptions.sunricher);
             } else if (key==='display_auto_off_enabled') {
                 const lookup = {'enable': 0, 'disabled': 1};
@@ -4839,13 +4851,13 @@ const converters = {
     },
     legrand_settingAlwaysEnableLed: {
         // connected power outlet is on attribute 2 and not 1
-        key: ['permanent_led'],
+        key: ['led_when_off'],
         convertSet: async (entity, key, value, meta) => {
             // enable or disable the LED (blue) when permitJoin=false (LED off)
             const enableLedIfOn = value === 'ON' || (value === 'OFF' ? false : !!value);
             const payload = {1: {value: enableLedIfOn, type: 16}};
             await entity.write('manuSpecificLegrandDevices', payload, manufacturerOptions.legrand);
-            return {state: {'permanent_led': value}};
+            return {state: {'led_when_off': value}};
         },
         convertGet: async (entity, key, meta) => {
             await entity.read('manuSpecificLegrandDevices', [0x0001], manufacturerOptions.legrand);

package/devices/aurora_lighting.js

@@ -18,6 +18,17 @@ const tzLocal = {
             return {state: {backlight_led: state.toUpperCase()}};
         },
     },
+    backlight_brightness: {
+        key: ['brightness'],
+        options: [exposes.options.transition()],
+        convertSet: async (entity, key, value, meta) => {
+            await entity.command('genLevelCtrl', 'moveToLevel', {level: value, transtime: 0}, utils.getOptions(meta.mapped, entity));
+            return {state: {brightness: value}};
+        },
+        convertGet: async (entity, key, meta) => {
+            await entity.read('genLevelCtrl', ['currentLevel']);
+        },
+    },
 };
 
 const disableBatteryRotaryDimmerReporting = async (endpoint) => {
@@ -181,12 +192,12 @@ module.exports = [
         model: 'AU-A1ZBDSS',
         vendor: 'Aurora Lighting',
         description: 'Double smart socket UK',
-        fromZigbee: [fz.identify, fz.on_off, fz.electrical_measurement],
+        fromZigbee: [fz.identify, fz.on_off, fz.electrical_measurement, fz.brightness],
         exposes: [e.switch().withEndpoint('left'), e.switch().withEndpoint('right'),
             e.power().withEndpoint('left'), e.power().withEndpoint('right'),
             exposes.numeric('brightness', ea.ALL).withValueMin(0).withValueMax(254)
                 .withDescription('Brightness of this backlight LED')],
-        toZigbee: [tz.light_onoff_brightness],
+        toZigbee: [tzLocal.backlight_brightness, tz.on_off],
         meta: {multiEndpoint: true},
         endpoint: (device) => {
             return {'left': 1, 'right': 2};

package/devices/awox.js

@@ -67,6 +67,7 @@ module.exports = [
         vendor: 'AwoX',
         description: 'LED white',
         extend: extend.light_onoff_brightness(),
+        whiteLabel: [{vendor: 'EGLO', model: '12229'}],
     },
     {
         fingerprint: [
@@ -248,6 +249,7 @@ module.exports = [
         vendor: 'AwoX',
         description: 'LED light with color temperature',
         extend: extend.light_onoff_brightness_colortemp({colorTempRange: [153, 370]}),
+        whiteLabel: [{vendor: 'EGLO', model: '12239'}],
     },
     {
         fingerprint: [

package/devices/bticino.js

@@ -16,7 +16,7 @@ module.exports = [
         toZigbee: [tz.on_off, tz.legrand_settingAlwaysEnableLed, tz.legrand_settingEnableLedIfOn, tz.legrand_identify],
         exposes: [
             e.switch(), e.action(['identify', 'on', 'off']),
-            exposes.binary('permanent_led', ea.ALL, 'ON', 'OFF').withDescription('Enable or disable the permanent blue LED'),
+            exposes.binary('led_when_off', ea.ALL, 'ON', 'OFF').withDescription('Enables the LED when the light is off'),
             exposes.binary('led_when_on', ea.ALL, 'ON', 'OFF').withDescription('Enables the LED when the light is on'),
         ],
         configure: async (device, coordinatorEndpoint, logger) => {
@@ -39,7 +39,7 @@ module.exports = [
             exposes.numeric('ballast_maximum_level', ea.ALL).withValueMin(1).withValueMax(254)
                 .withDescription('Specifies the maximum brightness value'),
             exposes.binary('device_mode', ea.ALL, 'dimmer_on', 'dimmer_off').withDescription('Allow the device to change brightness'),
-            exposes.binary('permanent_led', ea.ALL, 'ON', 'OFF').withDescription('Enable or disable the permanent blue LED'),
+            exposes.binary('led_when_off', ea.ALL, 'ON', 'OFF').withDescription('Enables the LED when the light is off'),
             exposes.binary('led_when_on', ea.ALL, 'ON', 'OFF').withDescription('Enables the LED when the light is on')],
         configure: async (device, coordinatorEndpoint, logger) => {
             await extend.light_onoff_brightness().configure(device, coordinatorEndpoint, logger);

package/devices/gledopto.js

@@ -315,6 +315,13 @@ module.exports = [
         extend: gledoptoExtend.light_onoff_brightness_colortemp_color(),
         meta: {disableDefaultResponse: true},
     },
+    {
+        zigbeeModel: ['GL-B-002P'],
+        model: 'GL-B-002P',
+        vendor: 'Gledopto',
+        description: 'Zigbee smart filament LED bulb',
+        extend: extend.light_onoff_brightness_colortemp_color({colorTempRange: [158, 495]}),
+    },
     {
         zigbeeModel: ['GL-MC-001P'],
         model: 'GL-MC-001P',

package/devices/heiman.js

@@ -287,7 +287,7 @@ module.exports = [
         description: 'Smart motion sensor',
         fromZigbee: [fz.ias_occupancy_alarm_1, fz.battery],
         toZigbee: [],
-        exposes: [e.occupancy(), e.battery_low(), e.battery(), e.battery_voltage()],
+        exposes: [e.occupancy(), e.battery_low(), e.battery(), e.battery_voltage(), e.tamper()],
         meta: {battery: {voltageToPercentage: '3V_2500'}},
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);

package/devices/ikea.js

@@ -13,11 +13,15 @@ const {
     calibrateAndPrecisionRoundOptions, postfixWithEndpointName, getMetaValue,
 } = require('../lib/utils');
 
-const bulbOnEvent = async (type, data, device) => {
+const bulbOnEvent = async (type, data, device, options, state) => {
     /**
      * IKEA bulbs lose their configured reportings when losing power.
      * A deviceAnnounce indicates they are powered on again.
      * Reconfigure the configured reoprting here.
+     *
+     * Additionally some other information is lost like
+     *   color_options.execute_if_off. We also restore these.
+     *
      * NOTE: binds are not lost so rebinding is not needed!
      */
     if (type === 'deviceAnnounce') {
@@ -29,6 +33,12 @@ const bulbOnEvent = async (type, data, device) => {
                 }]);
             }
         }
+
+        // NOTE: execute_if_off default is false
+        //       we only restore if true, to save unneeded network writes
+        if (state.color_options.execute_if_off === true) {
+            device.endpoints[0].write('lightingColorCtrl', {'options': 1});
+        }
     }
 };
 

package/devices/immax.js

@@ -66,16 +66,18 @@ module.exports = [
         model: '07048L',
         vendor: 'Immax',
         description: 'NEO SMART plug',
-        fromZigbee: [fz.on_off, fz.electrical_measurement],
+        fromZigbee: [fz.on_off, fz.electrical_measurement, fz.metering],
         toZigbee: [tz.on_off],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
-            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement']);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'haElectricalMeasurement', 'seMetering']);
             await reporting.onOff(endpoint);
             await reporting.readEletricalMeasurementMultiplierDivisors(endpoint);
+            await reporting.readMeteringMultiplierDivisor(endpoint);
+            await reporting.currentSummDelivered(endpoint);
             await reporting.activePower(endpoint);
         },
-        exposes: [e.switch(), e.power()],
+        exposes: [e.switch(), e.power(), e.energy()],
     },
     {
         zigbeeModel: ['losfena'],

package/devices/keen_home.js

@@ -41,7 +41,8 @@ module.exports = [
         exposes: [e.cover_position().setAccess('state', ea.ALL), e.temperature(), e.battery(), e.pressure()],
     },
     {
-        zigbeeModel: ['SV02-410-MP-1.3', 'SV02-412-MP-1.3', 'SV02-610-MP-1.3', 'SV02-612-MP-1.3', 'SV02-410-MP-1.0', 'SV02-410-MP-1.2'],
+        zigbeeModel: ['SV02-410-MP-1.3', 'SV02-412-MP-1.3', 'SV02-610-MP-1.3', 'SV02-612-MP-1.2', 'SV02-612-MP-1.3', 'SV02-410-MP-1.0',
+            'SV02-410-MP-1.2'],
         model: 'SV02',
         vendor: 'Keen Home',
         description: 'Smart vent',

package/devices/legrand.js

@@ -182,7 +182,7 @@ module.exports = [
             exposes.numeric('ballast_maximum_level', ea.ALL).withValueMin(1).withValueMax(254)
                 .withDescription('Specifies the maximum brightness value'),
             exposes.binary('device_mode', ea.ALL, 'dimmer_on', 'dimmer_off').withDescription('Allow the device to change brightness'),
-            exposes.binary('permanent_led', ea.ALL, 'ON', 'OFF').withDescription('Enable or disable the permanent blue LED'),
+            exposes.binary('led_when_off', ea.ALL, 'ON', 'OFF').withDescription('Enable the LED when the light is off'),
             exposes.binary('led_when_on', ea.ALL, 'ON', 'OFF').withDescription('Enables the LED when the light is on')],
         configure: async (device, coordinatorEndpoint, logger) => {
             await extend.light_onoff_brightness().configure(device, coordinatorEndpoint, logger);
@@ -328,7 +328,7 @@ module.exports = [
         toZigbee: [tz.on_off, tz.legrand_settingAlwaysEnableLed, tz.legrand_settingEnableLedIfOn],
         exposes: [e.switch().withEndpoint('left'),
             e.switch().withEndpoint('right'),
-            exposes.binary('permanent_led', ea.ALL, 'ON', 'OFF').withDescription('Enable or disable the permanent blue LED'),
+            exposes.binary('led_when_off', ea.ALL, 'ON', 'OFF').withDescription('Enable the LED when the light is off'),
             exposes.binary('led_when_on', ea.ALL, 'ON', 'OFF').withDescription('Enables the LED when the light is on')],
         meta: {multiEndpoint: true},
         configure: async (device, coordinatorEndpoint, logger) => {

package/devices/namron.js

@@ -276,7 +276,7 @@ module.exports = [
             exposes.climate()
                 .withSetpoint('occupied_heating_setpoint', 0, 40, 0.1)
                 .withLocalTemperature()
-                .withLocalTemperatureCalibration(-30, 30, 0.1)
+                .withLocalTemperatureCalibration(-3, 3, 0.1)
                 .withSystemMode(['off', 'auto', 'heat'])
                 .withRunningState(['idle', 'heat']),
             exposes.binary('away_mode', ea.ALL, 'ON', 'OFF')
@@ -308,16 +308,16 @@ module.exports = [
                 .withDescription('The temperature on the display.  Default: Room Temperature.'),
             exposes.numeric('window_open_check', ea.ALL)
                 .withUnit('°C')
-                .withValueMin(3).withValueMax(8).withValueStep(0.5)
-                .withDescription('The threshold to detect window open, between 3 and 8 in 0.5 °C.  Default: 0 (disabled).'),
+                .withValueMin(1.5).withValueMax(4).withValueStep(0.5)
+                .withDescription('The threshold to detect window open, between 1.5 and 4 in 0.5 °C.  Default: 0 (disabled).'),
             exposes.numeric('hysterersis', ea.ALL)
                 .withUnit('°C')
-                .withValueMin(5).withValueMax(20).withValueStep(0.1)
-                .withDescription('Hysteresis setting, between 5 and 20 in 0.1 °C.  Default: 5.'),
+                .withValueMin(0.5).withValueMax(2).withValueStep(0.1)
+                .withDescription('Hysteresis setting, between 0.5 and 2 in 0.1 °C.  Default: 0.5.'),
             exposes.enum('display_auto_off_enabled', ea.ALL, ['enable', 'disabled']),
             exposes.numeric('alarm_airtemp_overvalue', ea.ALL)
                 .withUnit('°C')
-                .withValueMin(20).withValueMax(60).withValueStep(1)
+                .withValueMin(20).withValueMax(60)
                 .withDescription('Room temperature alarm threshold, between 20 and 60 in °C.  0 means disabled.  Default: 45.'),
         ],
         configure: async (device, coordinatorEndpoint, logger) => {

package/devices/philips.js

@@ -81,6 +81,15 @@ module.exports = [
         extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
         ota: ota.zigbeeOTA,
     },
+    {
+        zigbeeModel: ['929003045501_01', '929003045501_02', '929003045501_03'],
+        model: '929003045501',
+        vendor: 'Philips',
+        description: 'Hue Centura recessed spotlight white and color ambiance GU10 (black)',
+        meta: {turnsOffAtBrightness1: true},
+        extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
+        ota: ota.zigbeeOTA,
+    },
     {
         zigbeeModel: ['929003047501'],
         model: '929003047501',
@@ -2258,6 +2267,20 @@ module.exports = [
         },
         ota: ota.zigbeeOTA,
     },
+    {
+        zigbeeModel: ['LOM011'],
+        model: '8719514342361',
+        vendor: 'Philips',
+        description: 'Hue smart plug - AU',
+        extend: extend.switch(),
+        toZigbee: [tz.on_off].concat([tz.hue_power_on_behavior, tz.hue_power_on_error]),
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(11);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff']);
+            await reporting.onOff(endpoint);
+        },
+        ota: ota.zigbeeOTA,
+    },
     {
         zigbeeModel: ['LOM006'],
         model: '9290024426',

package/devices/rtx.js

@@ -6,7 +6,8 @@ const ea = exposes.access;
 
 module.exports = [
     {
-        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_akjefhj5'}, {modelID: 'TS0601', manufacturerName: '_TZE200_2wg5qrjy'}],
+        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_akjefhj5'}, {modelID: 'TS0601', manufacturerName: '_TZE200_2wg5qrjy'},
+            {modelID: 'TS0601', manufacturerName: '_TZE200_81isopgh'}],
         model: 'ZVG1',
         vendor: 'RTX',
         description: 'Zigbee smart water valve',

package/devices/tuya.js

@@ -1929,8 +1929,9 @@ module.exports = [
         model: 'TS011F_din_smart_relay',
         description: 'Din smart relay (with power monitoring)',
         vendor: 'TuYa',
-        fromZigbee: [fz.on_off, fz.electrical_measurement, fz.metering, fz.ignore_basic_report, fz.tuya_switch_power_outage_memory],
-        toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory],
+        fromZigbee: [fz.on_off, fz.electrical_measurement, fz.metering, fz.ignore_basic_report, fz.tuya_switch_power_outage_memory,
+            fz.tuya_relay_din_led_indicator],
+        toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory, tz.tuya_relay_din_led_indicator],
         whiteLabel: [{vendor: 'MatSee Plus', model: 'ATMS1602Z'}],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
@@ -1945,15 +1946,17 @@ module.exports = [
         },
         exposes: [e.switch(), e.power(), e.current(), e.voltage().withAccess(ea.STATE),
             e.energy(), exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
-                .withDescription('Recover state after power outage')],
+                .withDescription('Recover state after power outage'),
+            exposes.enum('indicator_mode', ea.STATE_SET, ['off', 'on_off', 'off_on'])
+                .withDescription('Relay LED indicator mode')],
     },
     {
         fingerprint: [{modelID: 'TS011F', manufacturerName: '_TZ3000_7issjl2q'}],
         model: 'ATMS1601Z',
         description: 'Din smart relay (without power monitoring)',
         vendor: 'TuYa',
-        fromZigbee: [fz.on_off, fz.ignore_basic_report, fz.tuya_switch_power_outage_memory],
-        toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory],
+        fromZigbee: [fz.on_off, fz.ignore_basic_report, fz.tuya_switch_power_outage_memory, fz.tuya_relay_din_led_indicator],
+        toZigbee: [tz.on_off, tz.tuya_switch_power_outage_memory, tz.tuya_relay_din_led_indicator],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
             await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff']);
@@ -1961,7 +1964,9 @@ module.exports = [
         },
         exposes: [e.switch(),
             exposes.enum('power_outage_memory', ea.STATE_SET, ['on', 'off', 'restore'])
-                .withDescription('Recover state after power outage')],
+                .withDescription('Recover state after power outage'),
+            exposes.enum('indicator_mode', ea.STATE_SET, ['off', 'on_off', 'off_on'])
+                .withDescription('Relay LED indicator mode')],
     },
     {
         fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_nklqjk62'}],
@@ -2335,4 +2340,14 @@ module.exports = [
                 .withDescription('Alarm humidity min'),
         ],
     },
+    {
+        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_qoy0ekbd'}],
+        model: 'CX-0726',
+        vendor: 'TuYa',
+        description: 'Temperature & humidity LCD sensor',
+        fromZigbee: [fz.tuya_temperature_humidity_sensor, fz.ignore_tuya_set_time],
+        toZigbee: [],
+        onEvent: tuya.onEventSetLocalTime,
+        exposes: [e.temperature(), e.humidity(), e.battery()],
+    },
 ];

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "14.0.508",
+  "version": "14.0.511",
   "description": "Collection of device converters to be used with zigbee-herdsman",
   "main": "index.js",
   "files": [