zigbee-herdsman-converters 14.0.398 → 14.0.402

package/converters/fromZigbee.js

@@ -719,6 +719,7 @@ const converters = {
                 {key: 'rmsVoltage', name: 'voltage', factor: 'acVoltage'},
                 {key: 'rmsVoltagePhB', name: 'voltage_phase_b', factor: 'acVoltage'},
                 {key: 'rmsVoltagePhC', name: 'voltage_phase_c', factor: 'acVoltage'},
+                {key: 'acFrequency', name: 'ac_frequency', factor: 'acFrequency'},
             ];
 
             const payload = {};
@@ -730,6 +731,9 @@ const converters = {
                     payload[property] = calibrateAndPrecisionRoundOptions(value, options, entry.name);
                 }
             }
+            if (msg.data.hasOwnProperty('powerFactor')) {
+                payload.power_factor = precisionRound(msg.data['powerFactor'] / 100, 2);
+            }
             return payload;
         },
     },
@@ -4045,7 +4049,8 @@ const converters = {
             exposes.options.precision('humidity'), exposes.options.calibration('humidity'),
             exposes.options.precision('co2'), exposes.options.calibration('co2'),
             exposes.options.precision('voc'), exposes.options.calibration('voc'),
-            exposes.options.precision('formaldehyd'), exposes.options.calibration('formaldehyd')],
+            exposes.options.precision('formaldehyd'), exposes.options.calibration('formaldehyd'),
+            exposes.options.precision('pm25'), exposes.options.calibration('pm25')],
         convert: (model, msg, publish, options, meta) => {
             const dpValue = tuya.firstDpValue(msg, meta, 'tuya_air_quality');
             const dp = dpValue.dp;
@@ -4062,6 +4067,8 @@ const converters = {
             case tuya.dataPoints.tuyaSabFormaldehyd:
                 // Not sure which unit this is, supposedly mg/m³, but the value seems way too high.
                 return {formaldehyd: calibrateAndPrecisionRoundOptions(value, options, 'formaldehyd')};
+            case tuya.dataPoints.tuyaSahkMP25:
+                return {pm25: calibrateAndPrecisionRoundOptions(value, options, 'pm25')};
             default:
                 meta.logger.warn(`zigbee-herdsman-converters:TuyaSmartAirBox: Unrecognized DP #${
                     dp} with data ${JSON.stringify(dpValue)}`);
@@ -5250,9 +5257,11 @@ const converters = {
                     else if (index === 5) {
                         if (['JT-BZ-01AQ/A'].includes(model.model)) payload.power_outage_count = value;
                     } else if (index === 100) {
-                        if (['QBKG19LM', 'QBKG20LM', 'QBKG39LM', 'QBKG41LM', 'QBCZ15LM'].includes(model.model)) {
+                        if (['QBKG20LM', 'QBKG39LM', 'QBKG41LM', 'QBCZ15LM'].includes(model.model)) {
                             const mapping = model.model === 'QBCZ15LM' ? 'relay' : 'left';
                             payload[`state_${mapping}`] = value === 1 ? 'ON' : 'OFF';
+                        } else if (['WXKG14LM', 'WXKG16LM', 'WXKG17LM'].includes(model.model)) {
+                            payload.click_mode = {1: 'fast', 2: 'multi'}[value];
                         } else {
                             payload.state = value === 1 ? 'ON' : 'OFF';
                         }
@@ -5260,10 +5269,17 @@ const converters = {
                         if (['QBKG19LM', 'QBKG20LM', 'QBKG39LM', 'QBKG41LM', 'QBCZ15LM'].includes(model.model)) {
                             const mapping = model.model === 'QBCZ15LM' ? 'usb' : 'right';
                             payload[`state_${mapping}`] = value === 1 ? 'ON' : 'OFF';
+                        } else if (['QBKG25LM', 'QBKG34LM'].includes(model.model)) {
+                            payload.state_center = value === 1 ? 'ON' : 'OFF';
                         } else if (['RTCGQ12LM'].includes(model.model)) {
                             payload.illuminance = calibrateAndPrecisionRoundOptions(value, options, 'illuminance');
                         }
-                    } else if (index === 149) {
+                    } else if (index ===102 ) {
+                        if (['QBKG25LM', 'QBKG34LM'].includes(model.model)) {
+                            payload.state_right = value === 1 ? 'ON' : 'OFF';
+                        }
+                    } else if (index === 105) payload.motion_sensitivity = {1: 'low', 2: 'medium', 3: 'high'}[value]; // RTCGQ13LM
+                    else if (index === 149) {
                         payload.energy = precisionRound(value, 2); // 0x95
                         // Consumption is deprecated
                         payload.consumption = payload.energy;
@@ -7228,6 +7244,26 @@ const converters = {
             return {occupancy: (zoneStatus & 1) > 0, tamper: (zoneStatus & 4) > 0};
         },
     },
+    ZM35HQ_attr: {
+        cluster: 'ssIasZone',
+        type: ['attributeReport', 'readResponse'],
+        convert: (model, msg, publish, options, meta) => {
+            let result = {};
+            const data = msg.data;
+            if (data && data.hasOwnProperty('zoneStatus')) {
+                result = converters.ias_occupancy_alarm_1_report.convert(model, msg, publish, options, meta);
+            }
+            if (data && data.hasOwnProperty('currentZoneSensitivityLevel')) {
+                const senslookup = {'0': 'low', '1': 'medium', '2': 'high'};
+                result.sensitivity = senslookup[data.currentZoneSensitivityLevel];
+            }
+            if (data && data.hasOwnProperty('61441')) {
+                const keeptimelookup = {'0': 30, '1': 60, '2': 120};
+                result.keep_time = keeptimelookup[data['61441']];
+            }
+            return result;
+        },
+    },
     tuya_gas: {
         cluster: 'manuSpecificTuya',
         type: ['commandDataResponse'],

package/converters/toZigbee.js

@@ -1409,6 +1409,42 @@ const converters = {
             await entity.read('seMetering', ['instantaneousDemand']);
         },
     },
+    currentsummdelivered: {
+        key: ['energy'],
+        convertGet: async (entity, key, meta) => {
+            await entity.read('seMetering', ['currentSummDelivered']);
+        },
+    },
+    frequency: {
+        key: ['ac_frequency'],
+        convertGet: async (entity, key, meta) => {
+            await entity.read('haElectricalMeasurement', ['acFrequency']);
+        },
+    },
+    powerfactor: {
+        key: ['power_factor'],
+        convertGet: async (entity, key, meta) => {
+            await entity.read('haElectricalMeasurement', ['powerFactor']);
+        },
+    },
+    acvoltage: {
+        key: ['voltage'],
+        convertGet: async (entity, key, meta) => {
+            await entity.read('haElectricalMeasurement', ['rmsVoltage']);
+        },
+    },
+    accurrent: {
+        key: ['current'],
+        convertGet: async (entity, key, meta) => {
+            await entity.read('haElectricalMeasurement', ['rmsCurrent']);
+        },
+    },
+    temperature: {
+        key: ['temperature'],
+        convertGet: async (entity, key, meta) => {
+            await entity.read('msTemperatureMeasurement', ['measuredValue']);
+        },
+    },
     // #endregion
 
     // #region Non-generic converters
@@ -5961,6 +5997,29 @@ const converters = {
             }
         },
     },
+    ZM35HQ_attr: {
+        key: [
+            'sensitivity', 'keep_time',
+        ],
+        convertSet: async (entity, key, value, meta) => {
+            switch (key) {
+            case 'sensitivity':
+                await entity.write('ssIasZone', {currentZoneSensitivityLevel: {'low': 0, 'medium': 1, 'high': 2}[value]},
+                    {sendWhen: 'active'});
+                break;
+            case 'keep_time':
+                await entity.write('ssIasZone', {61441: {value: {'30': 0, '60': 1, '120': 2}[value], type: 0x20}}, {sendWhen: 'active'});
+                break;
+            default: // Unknown key
+                throw new Error(`Unhandled key ${key}`);
+            }
+        },
+        convertGet: async (entity, key, meta) => {
+            // Apparently, reading values may interfere with a commandStatusChangeNotification for changed occupancy.
+            // Therefore, read "zoneStatus" as well.
+            await entity.read('ssIasZone', ['currentZoneSensitivityLevel', 61441, 'zoneStatus'], {sendWhen: 'active'});
+        },
+    },
     TS0210_sensitivity: {
         key: ['sensitivity'],
         convertSet: async (entity, key, value, meta) => {

package/devices/edp.js

@@ -16,8 +16,10 @@ module.exports = [
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(85);
             await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'seMetering']);
+            // await reporting.readMeteringMultiplierDivisor(endpoint);
+            // Fix for UNSUPPORTED_ATTRIBUTE
+            endpoint.saveClusterAttributeKeyValue('seMetering', {divisor: 1000, multiplier: 1});
             await reporting.onOff(endpoint);
-            await reporting.readMeteringMultiplierDivisor(endpoint);
             await reporting.instantaneousDemand(endpoint);
         },
         exposes: [e.switch(), e.power(), e.energy()],

package/devices/ikea.js

@@ -746,10 +746,10 @@ module.exports = [
         extend: tradfriExtend.light_onoff_brightness_colortemp_color(),
     },
     {
-        zigbeeModel: ['TRADFRIbulbE14WWclear250lm'],
+        zigbeeModel: ['TRADFRIbulbE14WWclear250lm', 'TRADFRIbulbE12WWclear250lm'],
         model: 'LED1935C3',
         vendor: 'IKEA',
-        description: 'TRADFRI LED bulb E14 WW clear 250 lumen, dimmable',
+        description: 'TRADFRI LED bulb E12/E14 WW clear 250 lumen, dimmable',
         extend: tradfriExtend.light_onoff_brightness(),
     },
     {

package/devices/legrand.js

@@ -15,6 +15,16 @@ const readInitialBatteryState = async (type, data, device) => {
     }
 };
 
+const fzLocal = {
+    command_off: {
+        cluster: 'genOnOff',
+        type: 'commandOff',
+        convert: (model, msg, publish, options, meta) => {
+            return {action: 'off'};
+        },
+    },
+};
+
 module.exports = [
     {
         zigbeeModel: [' Contactor\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000'+
@@ -107,11 +117,12 @@ module.exports = [
         vendor: 'Legrand',
         // led blink RED when battery is low
         description: 'Wireless remote switch',
-        fromZigbee: [fz.identify, fz.command_on, fz.command_off, fz.command_toggle, fz.legacy.cmd_move, fz.legacy.cmd_stop, fz.battery],
+        fromZigbee: [fz.identify, fz.command_on, fzLocal.command_off, fz.command_toggle, fz.legacy.cmd_move, fz.legacy.cmd_stop,
+            fz.battery],
         exposes: [e.battery(), e.action(['identify', 'on', 'off', 'toggle', 'brightness_move_up',
             'brightness_move_down', 'brightness_stop'])],
         toZigbee: [],
-        meta: {handleDuplicateTransaction: true, battery: {voltageToPercentage: '3V_2500'}},
+        meta: {battery: {voltageToPercentage: '3V_2500'}},
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
             await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg', 'genOnOff', 'genLevelCtrl']);

package/devices/lonsonho.js

@@ -32,6 +32,26 @@ module.exports = [
             exposes.enum('backlight_mode', ea.ALL, ['LOW', 'MEDIUM', 'HIGH']),
             exposes.numeric('calibration_time', ea.STATE).withUnit('S').withDescription('Calibration time')],
     },
+    {
+        fingerprint: [{modelID: 'TS130F', manufacturerName: '_TZ3000_j1xl73iw'}],
+        model: 'TS130F_dual',
+        vendor: 'Lonsonho',
+        description: 'Dual curtain/blind module',
+        fromZigbee: [fz.cover_position_tilt, fz.tuya_cover_options],
+        toZigbee: [tz.cover_state, tz.cover_position_tilt, tz.tuya_cover_calibration, tz.tuya_cover_reversal],
+        meta: {multiEndpoint: true},
+        endpoint: (device) => {
+            return {'left': 1, 'right': 2};
+        },
+        exposes: [
+            exposes.enum('moving', ea.STATE, ['UP', 'STOP', 'DOWN']),
+            exposes.numeric('calibration_time', ea.STATE).withUnit('S').withDescription('Calibration time'),
+            e.cover_position().withEndpoint('left'), exposes.binary('calibration', ea.ALL, 'ON', 'OFF')
+                .withEndpoint('left'), exposes.binary('motor_reversal', ea.ALL, 'ON', 'OFF').withEndpoint('left'),
+            e.cover_position().withEndpoint('right'), exposes.binary('calibration', ea.ALL, 'ON', 'OFF')
+                .withEndpoint('right'), exposes.binary('motor_reversal', ea.ALL, 'ON', 'OFF').withEndpoint('right'),
+        ],
+    },
     {
         fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_8vxj8khv'}, {modelID: 'TS0601', manufacturerName: '_TZE200_7tdtqgwv'}],
         model: 'X711A',
@@ -177,4 +197,28 @@ module.exports = [
             await reporting.bind(device.getEndpoint(1), coordinatorEndpoint, ['genOnOff']);
         },
     },
+    {
+        fingerprint: [{modelID: 'TS110E', manufacturerName: '_TZ3210_zxbtub8r'}],
+        model: 'TS110E_1gang',
+        vendor: 'Lonsonho',
+        description: 'Zigbee smart dimmer module 1 gang with neutral',
+        extend: extend.light_onoff_brightness(),
+    },
+    {
+        fingerprint: [{modelID: 'TS110E', manufacturerName: '_TZ3210_wdexaypg'}],
+        model: 'TS110E_2gang',
+        vendor: 'Lonsonho',
+        description: 'Zigbee smart dimmer module 2 gang with neutral',
+        extend: extend.light_onoff_brightness({noConfigure: true}),
+        meta: {multiEndpoint: true},
+        exposes: [e.light_brightness().withEndpoint('l1'), e.light_brightness().withEndpoint('l2')],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            await extend.light_onoff_brightness().configure(device, coordinatorEndpoint, logger);
+            await reporting.bind(device.getEndpoint(1), coordinatorEndpoint, ['genOnOff', 'genLevelCtrl']);
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff', 'genLevelCtrl']);
+        },
+        endpoint: (device) => {
+            return {l1: 1, l2: 2};
+        },
+    },
 ];

package/devices/namron.js

@@ -220,6 +220,13 @@ module.exports = [
         description: 'LED 5,3W CCT E14',
         extend: extend.light_onoff_brightness_colortemp(),
     },
+    {
+        zigbeeModel: ['3802965'],
+        model: '3802965',
+        vendor: 'Namron',
+        description: 'LED 4,8W DIM GU10',
+        extend: extend.light_onoff_brightness(),
+    },
     {
         zigbeeModel: ['3802966'],
         model: '3802966',

package/devices/perenio.js

@@ -40,7 +40,6 @@ module.exports = [
         description: 'Motion sensor',
         fromZigbee: [fz.battery, fz.ias_occupancy_alarm_1],
         toZigbee: [],
-        meta: {battery: {dontDividePercentage: true}},
         exposes: [e.occupancy(), e.battery_low(), e.tamper(), e.battery()],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);

package/devices/philips.js

@@ -36,6 +36,15 @@ module.exports = [
         description: 'Hue white ambiance bathroom ceiling light Adore with Bluetooth',
         extend: extend.light_onoff_brightness_colortemp({colorTempRange: [153, 454]}),
     },
+    {
+        zigbeeModel: ['929003045301_01', '929003045301_02', '929003045301_03'],
+        model: '929003045301',
+        vendor: 'Philips',
+        description: 'Hue White and Color Ambiance GU10 (Centura)',
+        meta: {turnsOffAtBrightness1: true},
+        extend: hueExtend.light_onoff_brightness_colortemp_color({colorTempRange: [153, 500]}),
+        ota: ota.zigbeeOTA,
+    },
     {
         zigbeeModel: ['929003056901'],
         model: '929003056901',

package/devices/schneider_electric.js

@@ -186,6 +186,18 @@ module.exports = [
             await reporting.brightness(endpoint);
         },
     },
+    {
+        zigbeeModel: ['CH2AX/SWITCH/1'],
+        model: '41E2PBSWMZ/356PB2MBTZ',
+        vendor: 'Schneider Electric',
+        description: 'Wiser 40/300-Series module switch 2A',
+        extend: extend.switch(),
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff']);
+            await reporting.onOff(endpoint);
+        },
+    },
     {
         zigbeeModel: ['SMARTPLUG/1'],
         model: 'CCT711119',
@@ -630,4 +642,35 @@ module.exports = [
             await reporting.currentSummDelivered(endpoint, {min: 60, change: 1});
         },
     },
+    {
+        zigbeeModel: ['NHMOTION/SWITCH/1'],
+        model: '545D6306',
+        vendor: 'Schneider Electric',
+        description: 'LK FUGA Wiser wireless PIR with relay',
+        fromZigbee: [fz.on_off, fz.illuminance, fz.occupancy, fz.occupancy_timeout],
+        exposes: [e.switch().withEndpoint('l1'), e.occupancy(), e.illuminance_lux(), e.illuminance(),
+            exposes.numeric('occupancy_timeout', ea.ALL).withUnit('second').withValueMin(0).withValueMax(3600)
+                .withDescription('Time in seconds after which occupancy is cleared after detecting it')],
+        toZigbee: [tz.on_off, tz.occupancy_timeout],
+        endpoint: (device) => {
+            return {'default': 37, 'l1': 1, 'l2': 37};
+        },
+        meta: {multiEndpoint: true},
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint1 = device.getEndpoint(1);
+            const binds1 = ['genBasic', 'genIdentify', 'genOnOff'];
+            await reporting.bind(endpoint1, coordinatorEndpoint, binds1);
+            await reporting.onOff(endpoint1);
+            // read switch state
+            await endpoint1.read('genOnOff', ['onOff']);
+
+            const endpoint37 = device.getEndpoint(37);
+            const binds37 = ['msIlluminanceMeasurement', 'msOccupancySensing'];
+            await reporting.bind(endpoint37, coordinatorEndpoint, binds37);
+            await reporting.occupancy(endpoint37);
+            await reporting.illuminance(endpoint37);
+            // read occupancy_timeout
+            await endpoint37.read('msOccupancySensing', ['pirOToUDelay']);
+        },
+    },
 ];

package/devices/shinasystem.js

@@ -183,7 +183,7 @@ module.exports = [
         toZigbee: [],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
-            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg']);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'genPowerCfg']);
             await reporting.batteryVoltage(endpoint);
         },
         exposes: [e.battery(), e.battery_voltage(), e.action(['single', 'double', 'long'])],
@@ -230,11 +230,14 @@ module.exports = [
         toZigbee: [],
         exposes: [e.action(['1_single', '1_double', '1_long', '2_single', '2_double', '2_long',
             '3_single', '3_double', '3_long', '4_single', '4_double', '4_long']), e.battery(), e.battery_voltage()],
-        meta: {battery: {voltageToPercentage: '3V_2100'}},
+        meta: {battery: {voltageToPercentage: '3V_2100'}, multiEndpoint: true},
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
-            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg']);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'genPowerCfg']);
             await reporting.batteryVoltage(endpoint, {min: 30, max: 21600, change: 1});
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(3), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(4), coordinatorEndpoint, ['genOnOff']);
         },
     },
     {
@@ -247,7 +250,7 @@ module.exports = [
         toZigbee: [],
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
-            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg']);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'genPowerCfg']);
             await reporting.batteryVoltage(endpoint);
         },
         exposes: [e.battery(), e.battery_voltage(), e.action(['single', 'double', 'long'])],
@@ -260,12 +263,14 @@ module.exports = [
         fromZigbee: [fz.sihas_action, fz.battery],
         toZigbee: [],
         exposes: [e.action(['1_single', '1_double', '1_long', '2_single', '2_double', '2_long']), e.battery(), e.battery_voltage()],
-        meta: {battery: {voltageToPercentage: '3V_2100'}},
+        meta: {battery: {voltageToPercentage: '3V_2100'}, multiEndpoint: true},
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
-            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg']);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'genPowerCfg']);
             await reporting.batteryVoltage(endpoint, {min: 30, max: 21600, change: 1});
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
         },
+
     },
     {
         zigbeeModel: ['SBM300ZB3'],
@@ -276,11 +281,13 @@ module.exports = [
         toZigbee: [],
         exposes: [e.action(['1_single', '1_double', '1_long', '2_single', '2_double', '2_long',
             '3_single', '3_double', '3_long']), e.battery(), e.battery_voltage()],
-        meta: {battery: {voltageToPercentage: '3V_2100'}},
+        meta: {battery: {voltageToPercentage: '3V_2100'}, multiEndpoint: true},
         configure: async (device, coordinatorEndpoint, logger) => {
             const endpoint = device.getEndpoint(1);
-            await reporting.bind(endpoint, coordinatorEndpoint, ['genPowerCfg']);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['genOnOff', 'genPowerCfg']);
             await reporting.batteryVoltage(endpoint, {min: 30, max: 21600, change: 1});
+            await reporting.bind(device.getEndpoint(2), coordinatorEndpoint, ['genOnOff']);
+            await reporting.bind(device.getEndpoint(3), coordinatorEndpoint, ['genOnOff']);
         },
     },
     {
@@ -300,4 +307,38 @@ module.exports = [
             await reporting.currentSummDelivered(endpoint, {min: 1, max: 600, change: 5});
         },
     },
+    {
+        zigbeeModel: ['PMM-300Z2'],
+        model: 'PMM-300Z2',
+        vendor: 'ShinaSystem',
+        description: 'SiHAS energy monitor',
+        fromZigbee: [fz.electrical_measurement, fz.metering, fz.temperature],
+        toZigbee: [tz.metering_power, tz.currentsummdelivered, tz.frequency, tz.powerfactor, tz.acvoltage, tz.accurrent, tz.temperature],
+        exposes: [e.power().withAccess(ea.STATE_GET), e.energy().withAccess(ea.STATE_GET),
+            e.current().withAccess(ea.STATE_GET), e.voltage().withAccess(ea.STATE_GET),
+            e.temperature().withAccess(ea.STATE_GET).withDescription('temperature of device internal mcu'),
+            exposes.numeric('power_factor', ea.STATE_GET).withDescription('Measured electrical power factor'),
+            exposes.numeric('ac_frequency', ea.STATE_GET).withUnit('Hz').withDescription('Measured electrical ac frequency')],
+        configure: async (device, coordinatorEndpoint, logger) => {
+            const endpoint = device.getEndpoint(1);
+            await reporting.bind(endpoint, coordinatorEndpoint, ['haElectricalMeasurement', 'seMetering', 'msTemperatureMeasurement']);
+            await endpoint.read('haElectricalMeasurement', ['acVoltageMultiplier', 'acVoltageDivisor', 'acCurrentMultiplier',
+                'acCurrentDivisor']);
+            await endpoint.read('seMetering', ['multiplier', 'divisor']);
+            // await reporting.activePower(endpoint, {min: 1, max: 600, change: 5});  // no need, duplicate for power value.
+            await reporting.instantaneousDemand(endpoint, {min: 1, max: 600, change: 5});
+            await reporting.powerFactor(endpoint, {min: 10, max: 600, change: 1});
+            await reporting.rmsVoltage(endpoint, {min: 5, max: 600, change: 1});
+            await reporting.rmsCurrent(endpoint, {min: 5, max: 600, change: 1});
+            await reporting.currentSummDelivered(endpoint, {min: 1, max: 600, change: 5});
+            await reporting.temperature(endpoint, {min: 20, max: 300, change: 10});
+            endpoint.saveClusterAttributeKeyValue('haElectricalMeasurement', {acFrequencyMultiplier: 1, acFrequencyDivisor: 10});
+            await endpoint.configureReporting('haElectricalMeasurement', [{
+                attribute: 'acFrequency',
+                minimumReportInterval: 10,
+                maximumReportInterval: 600,
+                reportableChange: 3,
+            }]);
+        },
+    },
 ];

package/devices/sunricher.js

@@ -260,7 +260,8 @@ module.exports = [
         exposes: [e.action(['press_on', 'press_off', 'hold_on', 'hold_off', 'release'])],
     },
     {
-        fingerprint: [{modelID: 'GreenPower_2', ieeeAddr: /^0x000000005d5.....$/}],
+        fingerprint: [{modelID: 'GreenPower_2', ieeeAddr: /^0x000000005d5.....$/},
+            {modelID: 'GreenPower_2', ieeeAddr: /^0x0000000057e.....$/}],
         model: 'SR-ZGP2801K4-DIM',
         vendor: 'Sunricher',
         description: 'Pushbutton transmitter module',

package/devices/tuya.js

@@ -89,6 +89,15 @@ module.exports = [
         toZigbee: [],
         exposes: [e.temperature(), e.humidity(), e.co2(), e.voc(), e.formaldehyd()],
     },
+    {
+        fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_dwcarsat'}],
+        model: 'TS0601_smart_air_house_keeper',
+        vendor: 'TuYa',
+        description: 'Smart air house keeper',
+        fromZigbee: [fz.tuya_air_quality],
+        toZigbee: [],
+        exposes: [e.temperature(), e.humidity(), e.co2(), e.voc(), e.formaldehyd(), e.pm25()],
+    },
     {
         fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_ggev5fsl'}],
         model: 'TS0601_gas_sensor',
@@ -201,6 +210,13 @@ module.exports = [
         toZigbee: utils.replaceInArray(extend.light_onoff_brightness_color().toZigbee, [tz.light_color], [tzLocal.TS0504B_color]),
         meta: {applyRedFix: true},
     },
+    {
+        fingerprint: [{modelID: 'TS0501A', manufacturerName: '_TZ3000_yeg1e5eh'}],
+        model: 'TS0501A',
+        description: 'Zigbee light',
+        vendor: 'TuYa',
+        extend: extend.light_onoff_brightness(),
+    },
     {
         fingerprint: [{modelID: 'TS0501B', manufacturerName: '_TZ3000_4whigl8i'},
             {modelID: 'TS0501B', manufacturerName: '_TZ3210_4whigl8i'},
@@ -223,9 +239,7 @@ module.exports = [
             {modelID: 'TS0202', manufacturerName: '_TZ3000_mmtwjmaq'},
             {modelID: 'TS0202', manufacturerName: '_TZ3000_kmh5qpmb'},
             {modelID: 'TS0202', manufacturerName: '_TYZB01_zwvaj5wy'},
-            {modelID: 'TS0202', manufacturerName: '_TZ3000_mcxw5ehu'},
             {modelID: 'TS0202', manufacturerName: '_TZ3000_bsvqrxru'},
-            {modelID: 'TS0202', manufacturerName: '_TZ3000_msl6wxk9'},
             {modelID: 'TS0202', manufacturerName: '_TYZB01_tv3wxhcz'},
             {modelID: 'TS0202', manufacturerName: '_TYZB01_hqbdru35'},
             {modelID: 'TS0202', manufacturerName: '_TZ3000_tiwq83wk'},
@@ -238,6 +252,19 @@ module.exports = [
         toZigbee: [],
         exposes: [e.occupancy(), e.battery_low(), e.tamper(), e.battery()],
     },
+    {
+        fingerprint: [{modelID: 'TS0202', manufacturerName: '_TZ3000_mcxw5ehu'},
+            {modelID: 'TS0202', manufacturerName: '_TZ3000_msl6wxk9'}],
+        model: 'ZM-35H-Q',
+        vendor: 'TuYa',
+        description: 'Motion Sensor',
+        fromZigbee: [fz.ias_occupancy_alarm_1, fz.battery, fz.ignore_basic_report, fz.ZM35HQ_attr],
+        toZigbee: [tz.ZM35HQ_attr],
+        exposes: [e.occupancy(), e.battery_low(), e.tamper(), e.battery(),
+            exposes.enum('sensitivity', ea.ALL, ['low', 'medium', 'high']).withDescription('PIR sensor sensitivity'),
+            exposes.enum('keep_time', ea.ALL, ['30', '60', '120']).withDescription('PIR keep time in seconds'),
+        ],
+    },
     {
         fingerprint: [{modelID: 'TS0207', manufacturerName: '_TZ3000_m0vaazab'},
             {modelID: 'TS0207', manufacturerName: '_TZ3000_ufttklsz'},
@@ -319,8 +346,7 @@ module.exports = [
         ],
     },
     {
-        fingerprint: [{modelID: 'TS011F', manufacturerName: '_TZ3000_oiymh3qu'},
-            {modelID: 'TS011F', manufacturerName: '_TZ3000_o1jzcxou'}],
+        fingerprint: [{modelID: 'TS011F', manufacturerName: '_TZ3000_oiymh3qu'}],
         model: 'TS011F_socket_module',
         vendor: 'TuYa',
         description: 'Socket module',
@@ -329,12 +355,15 @@ module.exports = [
     },
     {
         fingerprint: [{modelID: 'TS011F', manufacturerName: '_TZ3000_wxtp7c5y'},
-            {modelID: 'TS011F', manufacturerName: '_TYZB01_mtunwanm'}],
+            {modelID: 'TS011F', manufacturerName: '_TYZB01_mtunwanm'},
+            {modelID: 'TS011F', manufacturerName: '_TZ3000_o1jzcxou'}],
         model: 'TS011F_wall_outlet',
         vendor: 'TuYa',
         description: 'In-wall outlet',
         extend: extend.switch(),
-        whiteLabel: [{vendor: 'Teekar', model: 'SWP86-01OG'}, {vendor: 'ClickSmart+', model: 'CMA30035'}],
+        whiteLabel: [{vendor: 'Teekar', model: 'SWP86-01OG'},
+            {vendor: 'ClickSmart+', model: 'CMA30035'},
+            {vendor: 'BSEED', model: 'Zigbee Socket'}],
     },
     {
         fingerprint: [{modelID: 'isltm67\u0000', manufacturerName: '_TYST11_pisltm67'}],
@@ -848,6 +877,7 @@ module.exports = [
             {modelID: 'TS0601', manufacturerName: '_TZE200_fzo2pocs'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_5sbebbzs'},
             {modelID: 'TS0601', manufacturerName: '_TZE200_zuz7f94z'},
+            {modelID: 'TS0601', manufacturerName: '_TZE200_zyrdrmno'},
         ],
         model: 'TS0601_cover',
         vendor: 'TuYa',
@@ -867,6 +897,7 @@ module.exports = [
             {vendor: 'Zemismart', model: 'M2805EGBZTN', description: 'Tubular motor'},
             {vendor: 'Zemismart', model: 'BCM500DS-TYZ', description: 'Curtain motor'},
             {vendor: 'A-OK', model: 'AM25', description: 'Tubular motor'},
+            {vendor: 'Alutech', model: 'AM/R-Sm', description: 'Tubular motor'},
         ],
         fromZigbee: [fz.tuya_cover, fz.ignore_basic_report],
         toZigbee: [tz.tuya_cover_control, tz.tuya_cover_options],
@@ -1434,7 +1465,8 @@ module.exports = [
     {
         fingerprint: [{modelID: 'TS0014', manufacturerName: '_TZ3000_jr2atpww'}, {modelID: 'TS0014', manufacturerName: '_TYZB01_dvakyzhd'},
             {modelID: 'TS0014', manufacturerName: '_TZ3210_w3hl6rao'}, {modelID: 'TS0014', manufacturerName: '_TYZB01_bagt1e4o'},
-            {modelID: 'TS0014', manufacturerName: '_TZ3000_r0pmi2p3'}, {modelID: 'TS0014', manufacturerName: '_TZ3000_fxjdcikv'}],
+            {modelID: 'TS0014', manufacturerName: '_TZ3000_r0pmi2p3'}, {modelID: 'TS0014', manufacturerName: '_TZ3000_fxjdcikv'},
+            {modelID: 'TS0014', manufacturerName: '_TZ3000_q6vxaod1'}],
         model: 'TS0014',
         vendor: 'TuYa',
         description: 'Smart light switch - 4 gang without neutral wire',
@@ -1580,6 +1612,7 @@ module.exports = [
         vendor: 'TuYa',
         description: 'Multiprise with 4 AC outlets and 2 USB super charging ports (16A)',
         extend: extend.switch(),
+        fromZigbee: [fz.on_off_skip_duplicate_transaction],
         exposes: [e.switch().withEndpoint('l1'), e.switch().withEndpoint('l2'), e.switch().withEndpoint('l3'),
             e.switch().withEndpoint('l4')],
         whiteLabel: [{vendor: 'LEELKI', model: 'WP33-EU'}],

package/devices/xiaomi.js

@@ -736,9 +736,6 @@ module.exports = [
             exposes.enum('operation_mode', ea.ALL, ['control_relay', 'decoupled'])
                 .withDescription('Decoupled mode for left button'),
         ],
-        configure: async (device, coordinatorEndpoint, logger) => {
-            await device.getEndpoint(1).write('aqaraOpple', {'mode': 1}, {manufacturerCode: 0x115f, disableResponse: true});
-        },
         onEvent: preventReset,
         ota: ota.zigbeeOTA,
     },
@@ -767,9 +764,6 @@ module.exports = [
                 .withDescription('Decoupled mode for right button')
                 .withEndpoint('right'),
         ],
-        configure: async (device, coordinatorEndpoint, logger) => {
-            await device.getEndpoint(1).write('aqaraOpple', {'mode': 1}, {manufacturerCode: 0x115f, disableResponse: true});
-        },
         onEvent: preventReset,
         ota: ota.zigbeeOTA,
     },
@@ -804,10 +798,8 @@ module.exports = [
                 .withDescription('Decoupled mode for right button')
                 .withEndpoint('right'),
         ],
-        configure: async (device, coordinatorEndpoint, logger) => {
-            await device.getEndpoint(1).write('aqaraOpple', {'mode': 1}, {manufacturerCode: 0x115f, disableResponse: true});
-        },
         onEvent: preventReset,
+        ota: ota.zigbeeOTA,
     },
     {
         zigbeeModel: ['lumi.sens', 'lumi.sensor_ht'],
@@ -997,7 +989,7 @@ module.exports = [
             e.voltage().withAccess(ea.STATE), e.current(), e.consumer_connected(), e.led_disabled_night(),
             e.power_outage_memory(), exposes.binary('auto_off', ea.STATE_SET, true, false)
                 .withDescription('Turn the device automatically off when attached device consumes less than 2W for 20 minutes'),
-            exposes.numeric('overload_protection', exposes.access.ALL).withValueMin(100).withValueMax(2200).withUnit('W')
+            exposes.numeric('overload_protection', exposes.access.ALL).withValueMin(100).withValueMax(2300).withUnit('W')
                 .withDescription('Maximum allowed load, turns off if exceeded')],
         ota: ota.zigbeeOTA,
     },
@@ -1691,7 +1683,7 @@ module.exports = [
         zigbeeModel: ['lumi.plug.macn01'],
         model: 'ZNCZ15LM',
         vendor: 'Xiaomi',
-        description: 'Aqara T1 power plug ZigBee',
+        description: 'Aqara smart plug T1 (china standard)',
         fromZigbee: [fz.on_off, fz.xiaomi_power, fz.aqara_opple],
         toZigbee: [tz.on_off, tz.xiaomi_switch_power_outage_memory, tz.xiaomi_led_disabled_night,
             tz.xiaomi_overload_protection, tz.xiaomi_socket_button_lock],
@@ -1700,9 +1692,6 @@ module.exports = [
             e.power_outage_memory(), e.led_disabled_night(), e.button_lock(),
             exposes.numeric('overload_protection', exposes.access.ALL).withValueMin(100).withValueMax(2500).withUnit('W')
                 .withDescription('Maximum allowed load, turns off if exceeded')],
-        configure: async (device, coordinatorEndpoint, logger) => {
-            await device.getEndpoint(1).write('aqaraOpple', {'mode': 1}, {manufacturerCode: 0x115f, disableResponse: true});
-        },
         ota: ota.zigbeeOTA,
     },
     {
@@ -1755,7 +1744,7 @@ module.exports = [
         zigbeeModel: ['lumi.plug.sacn03'],
         model: 'QBCZ15LM',
         vendor: 'Xiaomi',
-        description: 'Aqara smart wall outlet H1 usb',
+        description: 'Aqara smart wall outlet H1 (USB)',
         fromZigbee: [fz.on_off, fz.xiaomi_power, fz.aqara_opple],
         toZigbee: [tz.on_off, tz.xiaomi_switch_power_outage_memory, tz.xiaomi_led_disabled_night,
             tz.xiaomi_button_switch_mode, tz.xiaomi_overload_protection, tz.xiaomi_socket_button_lock],
@@ -1771,9 +1760,6 @@ module.exports = [
                 .withDescription('Control both relay and usb or only the relay with the physical switch button'),
             exposes.numeric('overload_protection', exposes.access.ALL).withValueMin(100).withValueMax(2500).withUnit('W')
                 .withDescription('Maximum allowed load, turns off if exceeded')],
-        configure: async (device, coordinatorEndpoint, logger) => {
-            await device.getEndpoint(1).write('aqaraOpple', {'mode': 1}, {manufacturerCode: 0x115f, disableResponse: true});
-        },
         ota: ota.zigbeeOTA,
     },
     {
@@ -1805,9 +1791,6 @@ module.exports = [
             e.current(), e.power_outage_memory(), e.led_disabled_night(), e.button_lock(),
             exposes.numeric('overload_protection', exposes.access.ALL).withValueMin(100).withValueMax(2500).withUnit('W')
                 .withDescription('Maximum allowed load, turns off if exceeded')],
-        configure: async (device, coordinatorEndpoint, logger) => {
-            await device.getEndpoint(1).write('aqaraOpple', {'mode': 1}, {manufacturerCode: 0x115f, disableResponse: true});
-        },
         ota: ota.zigbeeOTA,
     },
     {
@@ -1873,7 +1856,7 @@ module.exports = [
         model: 'WXKG14LM',
         vendor: 'Xiaomi',
         description: 'Aqara wireless remote switch H1 (single rocker)',
-        fromZigbee: [fz.xiaomi_multistate_action, fz.aqara_opple],
+        fromZigbee: [fz.xiaomi_multistate_action, fz.aqara_opple, fz.command_toggle],
         toZigbee: [tz.xiaomi_switch_click_mode, tz.aqara_opple_operation_mode],
         exposes: [e.battery(), e.battery_voltage(), e.action(['single', 'double', 'triple', 'hold']),
             exposes.enum('click_mode', ea.ALL, ['fast', 'multi'])

package/lib/tuya.js

@@ -418,6 +418,9 @@ const dataPoints = {
     tuyaSabHumidity: 19,
     tuyaSabVOC: 21,
     tuyaSabFormaldehyd: 22,
+    // tuya Smart Air House Keeper, Multifunctionale air quality detector.
+    // CO2, Temp, Humidity, VOC and Formaldehyd same as Smart Air Box
+    tuyaSahkMP25: 20,
     lidlTimer: 5,
     // Moes MS-105 Dimmer
     moes105DimmerState1: 1,

package/npm-shrinkwrap.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "14.0.398",
+  "version": "14.0.402",
   "lockfileVersion": 1,
   "requires": true,
   "dependencies": {

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "zigbee-herdsman-converters",
-  "version": "14.0.398",
+  "version": "14.0.402",
   "description": "Collection of device converters to be used with zigbee-herdsman",
   "main": "index.js",
   "files": [