wrangler 4.52.1 → 4.53.0

package/wrangler-dist/cli.d.ts

@@ -1,6 +1,6 @@
-import { Rule, CfModule, Environment, CfScriptFormat, CfModuleType, Config, CfKvNamespace, CfSendEmailBindings, CfBrowserBinding, CfAIBinding, CfImagesBinding, CfDurableObject, CfWorkflow, CfQueue, CfR2Bucket, CfD1Database, CfVectorize, CfHyperdrive, CfService, CfAnalyticsEngineDataset, CfDispatchNamespace, CfMTlsCertificate, CfPipeline, CfSecretsStoreSecrets, CfLogfwdrBinding, CfHelloWorld, CfRateLimit, CfWorkerLoader, CfVpcService, CfMediaBinding, DurableObjectMigration, ContainerApp, ZoneIdRoute, ZoneNameRoute, CustomDomainRoute, CfTailConsumer, ContainerEngine, CfUnsafe, ConfigBindingOptions, NormalizeAndValidateConfigArgs, ResolveConfigPathOptions, RawConfig, PackageJSON, ParseError, ComplianceConfig, UserError, FatalError } from '@cloudflare/workers-utils';
-export { ConfigBindingOptions as Experimental_ConfigBindingOptions, Config as Unstable_Config, RawConfig as Unstable_RawConfig, RawEnvironment as Unstable_RawEnvironment, experimental_patchConfig, experimental_readRawConfig, defaultWranglerConfig as unstable_defaultWranglerConfig } from '@cloudflare/workers-utils';
-import { Json, Request, Response as Response$1, NodeJSCompatMode, DispatchFetch, Miniflare, WorkerRegistry, MiniflareOptions, Mutex, WorkerOptions, ModuleRule, RemoteProxyConnectionString } from 'miniflare';
+import { Rule as Rule$1, CfModule, Environment as Environment$1, CfScriptFormat, CfModuleType, Config as Config$1, CfKvNamespace, CfSendEmailBindings, CfBrowserBinding, CfAIBinding, CfImagesBinding, CfDurableObject, CfWorkflow, CfQueue, CfR2Bucket, CfD1Database, CfVectorize, CfHyperdrive, CfService, CfAnalyticsEngineDataset, CfDispatchNamespace, CfMTlsCertificate, CfPipeline, CfSecretsStoreSecrets, CfLogfwdrBinding, CfHelloWorld, CfRateLimit, CfWorkerLoader, CfVpcService, CfMediaBinding, DurableObjectMigration as DurableObjectMigration$1, ContainerApp as ContainerApp$1, ZoneIdRoute as ZoneIdRoute$1, ZoneNameRoute as ZoneNameRoute$1, CustomDomainRoute as CustomDomainRoute$1, CfTailConsumer, ContainerEngine as ContainerEngine$1, CfUnsafe, ConfigBindingOptions, NormalizeAndValidateConfigArgs, ResolveConfigPathOptions, RawConfig as RawConfig$1, PackageJSON, ParseError, ComplianceConfig, UserError, FatalError } from '@cloudflare/workers-utils';
+export { ConfigBindingOptions as Experimental_ConfigBindingOptions, experimental_patchConfig, experimental_readRawConfig, defaultWranglerConfig as unstable_defaultWranglerConfig } from '@cloudflare/workers-utils';
+import { Json as Json$1, Request, Response as Response$1, NodeJSCompatMode, DispatchFetch, Miniflare, WorkerRegistry, MiniflareOptions, Mutex, WorkerOptions, ModuleRule, RemoteProxyConnectionString } from 'miniflare';
 import * as undici from 'undici';
 import { RequestInfo, RequestInit, Response, FormData } from 'undici';
 import { RouterConfig, AssetConfig } from '@cloudflare/workers-shared';
@@ -37,7 +37,7 @@ interface Unstable_DevOptions {
     compatibilityFlags?: string[];
     persist?: boolean;
     persistTo?: string;
-    vars?: Record<string, string | Json>;
+    vars?: Record<string, string | Json$1>;
     kv?: {
         binding: string;
         id?: string;
@@ -70,7 +70,7 @@ interface Unstable_DevOptions {
         binding: string;
     };
     moduleRoot?: string;
-    rules?: Rule[];
+    rules?: Rule$1[];
     logLevel?: "none" | "info" | "error" | "log" | "warn" | "debug";
     inspect?: boolean;
     local?: boolean;
@@ -78,7 +78,7 @@ interface Unstable_DevOptions {
     experimental?: {
         processEntrypoint?: boolean;
         additionalModules?: CfModule[];
-        d1Databases?: Environment["d1_databases"];
+        d1Databases?: Environment$1["d1_databases"];
         disableExperimentalWarning?: boolean;
         disableDevRegistry?: boolean;
         enablePagesAssetsServiceBinding?: EnablePagesAssetsServiceBindingOptions;
@@ -363,7 +363,7 @@ interface StartDevWorkerInput {
     /** The compatibility flags for the workerd runtime. */
     compatibilityFlags?: string[];
     /** Specify the compliance region mode of the Worker. */
-    complianceRegion?: Config["compliance_region"];
+    complianceRegion?: Config$1["compliance_region"];
     /** Configuration for Python modules. */
     pythonModules?: {
         /** A list of glob patterns to exclude files from the python_modules directory when bundling. */
@@ -379,8 +379,8 @@ interface StartDevWorkerInput {
     envFiles?: string[];
     /** The bindings available to the worker. The specified bindind type will be exposed to the worker on the `env` object under the same key. */
     bindings?: Record<string, Binding>;
-    migrations?: DurableObjectMigration[];
-    containers?: ContainerApp[];
+    migrations?: DurableObjectMigration$1[];
+    containers?: ContainerApp$1[];
     /** The triggers which will cause the worker's exported default handlers to be called. */
     triggers?: Trigger[];
     tailConsumers?: CfTailConsumer[];
@@ -400,7 +400,7 @@ interface StartDevWorkerInput {
         findAdditionalModules?: boolean;
         processEntrypoint?: boolean;
         /** Specifies types of modules matched by globs. */
-        moduleRules?: Rule[];
+        moduleRules?: Rule$1[];
         /** Replace global identifiers with constant expressions, e.g. { debug: 'true', version: '"1.0.0"' }. Only takes effect if bundle: true. */
         define?: Record<string, string>;
         /** Alias modules */
@@ -421,7 +421,7 @@ interface StartDevWorkerInput {
         jsxFactory?: string;
         jsxFragment?: string;
         tsconfig?: string;
-        nodejsCompatMode?: Hook<NodeJSCompatMode, [Config]>;
+        nodejsCompatMode?: Hook<NodeJSCompatMode, [Config$1]>;
         moduleRoot?: string;
     };
     /** Options applying to the worker's development preview environment. */
@@ -439,7 +439,7 @@ interface StartDevWorkerInput {
          */
         remote?: boolean | "minimal";
         /** Cloudflare Account credentials. Can be provided upfront or as a function which will be called only when required. */
-        auth?: AsyncHook<CfAccount, [Pick<Config, "account_id">]>;
+        auth?: AsyncHook<CfAccount, [Pick<Config$1, "account_id">]>;
         /** Whether local storage (KV, Durable Objects, R2, D1, etc) is persisted. You can also specify the directory to persist data to. */
         persist?: string;
         /** Controls which logs are logged 🤙. */
@@ -476,10 +476,10 @@ interface StartDevWorkerInput {
         /** Path to the docker executable. Defaults to 'docker' */
         dockerPath?: string;
         /** Options for the container engine */
-        containerEngine?: ContainerEngine;
+        containerEngine?: ContainerEngine$1;
     };
     legacy?: {
-        site?: Hook<Config["site"], [Config]>;
+        site?: Hook<Config$1["site"], [Config$1]>;
         useServiceEnvironments?: boolean;
     };
     unsafe?: Omit<CfUnsafe, "bindings">;
@@ -495,14 +495,14 @@ type StartDevWorkerOptions = Omit<StartDevWorkerInput, "assets" | "containers">
         nodejsCompatMode: NodeJSCompatMode;
         format: CfScriptFormat;
         moduleRoot: string;
-        moduleRules: Rule[];
+        moduleRules: Rule$1[];
         define: Record<string, string>;
         additionalModules: CfModule[];
         exports: string[];
         processEntrypoint: boolean;
     };
     legacy: StartDevWorkerInput["legacy"] & {
-        site?: Config["site"];
+        site?: Config$1["site"];
     };
     dev: StartDevWorkerInput["dev"] & {
         persist: string;
@@ -512,7 +512,7 @@ type StartDevWorkerOptions = Omit<StartDevWorkerInput, "assets" | "containers">
     assets?: AssetsOptions;
     containers?: ContainerNormalizedConfig[];
     name: string;
-    complianceRegion: Config["compliance_region"];
+    complianceRegion: Config$1["compliance_region"];
 };
 type HookValues = string | number | boolean | object | undefined | null;
 type Hook<T extends HookValues, Args extends unknown[] = []> = T | ((...args: Args) => T);
@@ -526,7 +526,7 @@ type File<Contents = string, Path = string> = {
     path?: Path;
 };
 type BinaryFile = File<Uint8Array>;
-type QueueConsumer = NonNullable<Config["queues"]["consumers"]>[number];
+type QueueConsumer = NonNullable<Config$1["queues"]["consumers"]>[number];
 type Trigger = {
     type: "workers.dev";
 } | {
@@ -534,11 +534,11 @@ type Trigger = {
     pattern: string;
 } | ({
     type: "route";
-} & ZoneIdRoute) | ({
+} & ZoneIdRoute$1) | ({
     type: "route";
-} & ZoneNameRoute) | ({
+} & ZoneNameRoute$1) | ({
     type: "route";
-} & CustomDomainRoute) | {
+} & CustomDomainRoute$1) | {
     type: "cron";
     cron: string;
 } | ({
@@ -551,7 +551,7 @@ type Binding = {
     value: string;
 } | {
     type: "json";
-    value: Json;
+    value: Json$1;
 } | ({
     type: "kv_namespace";
 } & BindingOmit<CfKvNamespace>) | ({
@@ -838,9 +838,9 @@ type ReadConfigOptions = ResolveConfigPathOptions & {
 /**
  * Get the Wrangler configuration; read it from the give `configPath` if available.
  */
-declare function readConfig(args: ReadConfigCommandArgs, options?: ReadConfigOptions): Config;
+declare function readConfig(args: ReadConfigCommandArgs, options?: ReadConfigOptions): Config$1;
 
-declare function getDurableObjectClassNameToUseSQLiteMap(migrations: Config["migrations"] | undefined): Map<string, boolean>;
+declare function getDurableObjectClassNameToUseSQLiteMap(migrations: Config$1["migrations"] | undefined): Map<string, boolean>;
 
 /**
  * Note about this file:
@@ -889,99 +889,1603 @@ declare class ExecutionContext {
     props: any;
 }
 
-/**
- * Get the Worker `vars` bindings for a `wrangler dev` instance of a Worker.
- *
- * The `vars` bindings can be specified in the Wrangler configuration file.
- * But "secret" `vars` are usually only provided at the server -
- * either by creating them in the Dashboard UI, or using the `wrangler secret` command.
- *
- * It is useful during development, to provide these types of variable locally.
- * When running `wrangler dev` we will look for a file called `.dev.vars`, situated
- * next to the User's Wrangler configuration file (or in the current working directory if there is no
- * Wrangler configuration). If the `--env <env>` option is set, we'll first look for
- * `.dev.vars.<env>`.
- *
- * If there are no `.dev.vars*` file, (and CLOUDFLARE_LOAD_DEV_VARS_FROM_DOT_ENV is not "false")
- * we will look for `.env*` files in the same directory.
- * If the `envFiles` option is set, we'll look for the `.env` files at those paths instead of the defaults.
- *
- * Any values in these files (all formatted like `.env` files) will add to or override `vars`
- * bindings provided in the Wrangler configuration file.
- *
- * @param configPath - The path to the Wrangler configuration file, if defined.
- * @param envFiles - An array of paths to .env files to load; if `undefined` the default .env files will be used (see `getDefaultEnvFiles()`).
- * The `envFiles` paths are resolved against the directory of the Wrangler configuration file, if there is one, otherwise against the current working directory.
- * @param vars - The existing `vars` bindings from the Wrangler configuration.
- * @param env - The specific environment name (e.g., "staging") or `undefined` if no specific environment is set.
- * @param silent - If true, will not log any messages about the loaded .dev.vars files or .env files.
- * @returns The merged `vars` bindings, including those loaded from `.dev.vars` or `.env` files.
- */
-declare function getVarsForDev(configPath: string | undefined, envFiles: string[] | undefined, vars: Config["vars"], env: string | undefined, silent?: boolean): Config["vars"];
+type Json = string | number | boolean | null | Json[] | {
+    [id: string]: Json;
+};
 
 /**
- * Returns the compatibility date to use in development.
- *
- * When no compatibility date is configured, uses the installed Workers runtime's latest supported date.
+ * The `Environment` interface declares all the configuration fields that
+ * can be specified for an environment.
  *
- * @param config wrangler configuration
- * @param compatibilityDate configured compatibility date
- * @returns the compatibility date to use in development
+ * This could be the top-level default environment, or a specific named environment.
  */
-declare function getDevCompatibilityDate(config: Config | undefined, compatibilityDate?: string | undefined): string;
-
-type ConfigurationOptions = {
-    outputDir: string;
-    projectPath: string;
-    workerName: string;
-    dryRun: boolean;
+interface Environment extends EnvironmentInheritable, EnvironmentNonInheritable {
+}
+type SimpleRoute = string;
+type ZoneIdRoute = {
+    pattern: string;
+    zone_id: string;
+    custom_domain?: boolean;
 };
-type ConfigurationResults = {
-    wranglerConfig: RawConfig;
+type ZoneNameRoute = {
+    pattern: string;
+    zone_name: string;
+    custom_domain?: boolean;
 };
-declare abstract class Framework {
+type CustomDomainRoute = {
+    pattern: string;
+    custom_domain: boolean;
+};
+type Route = SimpleRoute | ZoneIdRoute | ZoneNameRoute | CustomDomainRoute;
+/**
+ * Configuration in wrangler for Cloudchamber
+ */
+type CloudchamberConfig = {
+    image?: string;
+    location?: string;
+    instance_type?: "dev" | "basic" | "standard" | "lite" | "standard-1" | "standard-2" | "standard-3" | "standard-4";
+    vcpu?: number;
+    memory?: string;
+    ipv4?: boolean;
+};
+type UnsafeBinding = {
+    /**
+     * The name of the binding provided to the Worker
+     */
     name: string;
-    constructor(name?: string);
-    preview?: string;
-    deploy?: string;
-    typegen?: string;
-    /** Some frameworks (i.e. Nuxt) don't need additional configuration */
-    get configured(): boolean;
-    abstract configure(options: ConfigurationOptions): Promise<ConfigurationResults> | ConfigurationResults;
-    configurationDescription?: string;
-}
-
-type AutoConfigDetails = {
-    /** The name of the worker */
-    workerName: string;
-    /** The path to the project (defaults to cwd) */
-    projectPath: string;
-    /** The content of the project's package.json file (if any) */
-    packageJson?: PackageJSON;
-    /** Whether the project is already configured (no autoconfig required) */
-    configured: boolean;
-    /** Details about the detected framework (if any) */
-    framework?: Framework;
-    /** The build command used to build the project (if any) */
-    buildCommand?: string;
-    /** The output directory (if no framework is used, points to the raw asset files) */
-    outputDir?: string;
+    /**
+     * The 'type' of the unsafe binding.
+     */
+    type: string;
+    dev?: {
+        plugin: {
+            /**
+             * Package is the bare specifier of the package that exposes plugins to integrate into Miniflare via a named `plugins` export.
+             * @example "@cloudflare/my-external-miniflare-plugin"
+             */
+            package: string;
+            /**
+             * Plugin is the name of the plugin exposed by the package.
+             * @example "MY_UNSAFE_PLUGIN"
+             */
+            name: string;
+        };
+        /**
+         * Optional mapping of unsafe bindings names to options provided for the plugin.
+         */
+        options?: Record<string, unknown>;
+    };
+    [key: string]: unknown;
 };
-type AutoConfigOptions = {
-    /** Whether to run autoconfig without actually applying any filesystem modification (default: false) */
-    dryRun?: boolean;
+/**
+ * Configuration for a container application
+ */
+type ContainerApp = {
     /**
-     * Whether the build command should be run (default: true)
+     * Name of the application
+     * @optional Defaults to `worker_name-class_name` if not specified.
+     */
+    name?: string;
+    /**
+     * Number of application instances
+     * @deprecated
+     * @hidden
+     */
+    instances?: number;
+    /**
+     * Number of maximum application instances.
+     * @optional
+     */
+    max_instances?: number;
+    /**
+     * The path to a Dockerfile, or an image URI for the Cloudflare registry.
+     */
+    image: string;
+    /**
+     * Build context of the application.
+     * @optional - defaults to the directory of `image`.
+     */
+    image_build_context?: string;
+    /**
+     * Image variables available to the image at build-time only.
+     * For runtime env vars, refer to https://developers.cloudflare.com/containers/examples/env-vars-and-secrets/
+     * @optional
+     */
+    image_vars?: Record<string, string>;
+    /**
+     * The class name of the Durable Object the container is connected to.
+     */
+    class_name: string;
+    /**
+     * The scheduling policy of the application
+     * @optional
+     * @default "default"
+     */
+    scheduling_policy?: "default" | "moon" | "regional";
+    /**
+     * The instance type to be used for the container.
+     * Select from one of the following named instance types:
+     *  - lite: 1/16 vCPU, 256 MiB memory, and 2 GB disk
+     *  - basic: 1/4 vCPU, 1 GiB memory, and 4 GB disk
+     *  - standard-1: 1/2 vCPU, 4 GiB memory, and 8 GB disk
+     *  - standard-2: 1 vCPU, 6 GiB memory, and 12 GB disk
+     *  - standard-3: 2 vCPU, 8 GiB memory, and 16 GB disk
+     *  - standard-4: 4 vCPU, 12 GiB memory, and 20 GB disk
+     *  - dev: 1/16 vCPU, 256 MiB memory, and 2 GB disk (deprecated, use "lite" instead)
+     *  - standard: 1 vCPU, 4 GiB memory, and 4 GB disk (deprecated, use "standard-1" instead)
      *
-     * Note: When `dryRun` is `true` the build command is never run.
+     * Customers on an enterprise plan have the additional option to set custom limits.
+     *
+     * @optional
+     * @default "dev"
      */
-    runBuild?: boolean;
+    instance_type?: "dev" | "basic" | "standard" | "lite" | "standard-1" | "standard-2" | "standard-3" | "standard-4" | {
+        /** @defaults to 0.0625 (1/16 vCPU) */
+        vcpu?: number;
+        /** @defaults to 256 MiB */
+        memory_mib?: number;
+        /** @defaults to 2 GB */
+        disk_mb?: number;
+    };
     /**
-     * Whether the confirmation prompts should be skipped (default: false)
+     * @deprecated Use top level `containers` fields instead.
+     * `configuration.image` should be `image`
+     * limits should be set via `instance_type`
+     * @hidden
+     */
+    configuration?: {
+        image?: string;
+        labels?: {
+            name: string;
+            value: string;
+        }[];
+        secrets?: {
+            name: string;
+            type: "env";
+            secret: string;
+        }[];
+        disk?: {
+            size_mb: number;
+        };
+        vcpu?: number;
+        memory_mib?: number;
+    };
+    /**
+     * Scheduling constraints
+     * @hidden
+     */
+    constraints?: {
+        regions?: string[];
+        cities?: string[];
+        tier?: number;
+    };
+    /**
+     * Scheduling affinities
+     * @hidden
+     */
+    affinities?: {
+        colocation?: "datacenter";
+        hardware_generation?: "highest-overall-performance";
+    };
+    /**
+     * @deprecated use the `class_name` field instead.
+     * @hidden
+     */
+    durable_objects?: {
+        namespace_id: string;
+    };
+    /**
+     * Configures what percentage of instances should be updated at each step of a rollout.
+     * You can specify this as a single number, or an array of numbers.
      *
-     * Note: When `dryRun` is `true` the the confirmation prompts are always skipped.
+     * If this is a single number, each step will progress by that percentage.
+     * The options are 5, 10, 20, 25, 50 or 100.
+     *
+     * If this is an array, each step specifies the cumulative rollout progress.
+     * The final step must be 100.
+     *
+     * This can be overridden adhoc by deploying with the `--containers-rollout=immediate` flag,
+     * which will roll out to 100% of instances in one step.
+     *
+     * @optional
+     * @default [10,100]
+     * */
+    rollout_step_percentage?: number | number[];
+    /**
+     * How a rollout should be created. It supports the following modes:
+     *  - full_auto: The container application will be rolled out fully automatically.
+     *  - none: The container application won't have a roll out or update.
+     *  - manual: The container application will be rollout fully by manually actioning progress steps.
+     * @optional
+     * @default "full_auto"
+     * @hidden
      */
-    skipConfirmations?: boolean;
+    rollout_kind?: "full_auto" | "none" | "full_manual";
+    /**
+     * Configures the grace period (in seconds) for active instances before being shutdown during a rollout.
+     * @optional
+     * @default 0
+     */
+    rollout_active_grace_period?: number;
+    /**
+     * Directly passed to the API without wrangler-side validation or transformation.
+     * @hidden
+     */
+    unsafe?: Record<string, unknown>;
+};
+/**
+ * Configuration in wrangler for Durable Object Migrations
+ */
+type DurableObjectMigration = {
+    /** A unique identifier for this migration. */
+    tag: string;
+    /** The new Durable Objects being defined. */
+    new_classes?: string[];
+    /** The new SQLite Durable Objects being defined. */
+    new_sqlite_classes?: string[];
+    /** The Durable Objects being renamed. */
+    renamed_classes?: {
+        from: string;
+        to: string;
+    }[];
+    /** The Durable Objects being removed. */
+    deleted_classes?: string[];
+};
+/**
+ * The `EnvironmentInheritable` interface declares all the configuration fields for an environment
+ * that can be inherited (and overridden) from the top-level environment.
+ */
+interface EnvironmentInheritable {
+    /**
+     * The name of your Worker. Alphanumeric + dashes only.
+     *
+     * @inheritable
+     */
+    name: string | undefined;
+    /**
+     * This is the ID of the account associated with your zone.
+     * You might have more than one account, so make sure to use
+     * the ID of the account associated with the zone/route you
+     * provide, if you provide one. It can also be specified through
+     * the CLOUDFLARE_ACCOUNT_ID environment variable.
+     *
+     * @inheritable
+     */
+    account_id: string | undefined;
+    /**
+     * A date in the form yyyy-mm-dd, which will be used to determine
+     * which version of the Workers runtime is used.
+     *
+     * More details at https://developers.cloudflare.com/workers/configuration/compatibility-dates
+     *
+     * @inheritable
+     */
+    compatibility_date: string | undefined;
+    /**
+     * A list of flags that enable features from upcoming features of
+     * the Workers runtime, usually used together with compatibility_date.
+     *
+     * More details at https://developers.cloudflare.com/workers/configuration/compatibility-flags/
+     *
+     * @default []
+     * @inheritable
+     */
+    compatibility_flags: string[];
+    /**
+     * The entrypoint/path to the JavaScript file that will be executed.
+     *
+     * @inheritable
+     */
+    main: string | undefined;
+    /**
+     * If true then Wrangler will traverse the file tree below `base_dir`;
+     * Any files that match `rules` will be included in the deployed Worker.
+     * Defaults to true if `no_bundle` is true, otherwise false.
+     *
+     * @inheritable
+     */
+    find_additional_modules: boolean | undefined;
+    /**
+     * Determines whether Wrangler will preserve bundled file names.
+     * Defaults to false.
+     * If left unset, files will be named using the pattern ${fileHash}-${basename},
+     * for example, `34de60b44167af5c5a709e62a4e20c4f18c9e3b6-favicon.ico`.
+     *
+     * @inheritable
+     */
+    preserve_file_names: boolean | undefined;
+    /**
+     * The directory in which module rules should be evaluated when including additional files into a Worker deployment.
+     * This defaults to the directory containing the `main` entry point of the Worker if not specified.
+     *
+     * @inheritable
+     */
+    base_dir: string | undefined;
+    /**
+     * Whether we use <name>.<subdomain>.workers.dev to
+     * test and deploy your Worker.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#workersdev
+     *
+     * @default true
+     * @breaking
+     * @inheritable
+     */
+    workers_dev: boolean | undefined;
+    /**
+     * Whether we use <version>-<name>.<subdomain>.workers.dev to
+     * serve Preview URLs for your Worker.
+     *
+     * @default false
+     * @inheritable
+     */
+    preview_urls: boolean | undefined;
+    /**
+     * A list of routes that your Worker should be published to.
+     * Only one of `routes` or `route` is required.
+     *
+     * Only required when workers_dev is false, and there's no scheduled Worker (see `triggers`)
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#types-of-routes
+     *
+     * @inheritable
+     */
+    routes: Route[] | undefined;
+    /**
+     * A route that your Worker should be published to. Literally
+     * the same as routes, but only one.
+     * Only one of `routes` or `route` is required.
+     *
+     * Only required when workers_dev is false, and there's no scheduled Worker
+     *
+     * @inheritable
+     */
+    route: Route | undefined;
+    /**
+     * Path to a custom tsconfig
+     *
+     * @inheritable
+     */
+    tsconfig: string | undefined;
+    /**
+     * The function to use to replace jsx syntax.
+     *
+     * @default "React.createElement"
+     * @inheritable
+     */
+    jsx_factory: string;
+    /**
+     * The function to use to replace jsx fragment syntax.
+     *
+     * @default "React.Fragment"
+     * @inheritable
+     */
+    jsx_fragment: string;
+    /**
+     * A list of migrations that should be uploaded with your Worker.
+     *
+     * These define changes in your Durable Object declarations.
+     *
+     * More details at https://developers.cloudflare.com/workers/learning/using-durable-objects#configuring-durable-object-classes-with-migrations
+     *
+     * @default []
+     * @inheritable
+     */
+    migrations: DurableObjectMigration[];
+    /**
+     * "Cron" definitions to trigger a Worker's "scheduled" function.
+     *
+     * Lets you call Workers periodically, much like a cron job.
+     *
+     * More details here https://developers.cloudflare.com/workers/platform/cron-triggers
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#triggers
+     *
+     * @default {crons: undefined}
+     * @inheritable
+     */
+    triggers: {
+        crons: string[] | undefined;
+    };
+    /**
+     * Specify limits for runtime behavior.
+     * Only supported for the "standard" Usage Model
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#limits
+     *
+     * @inheritable
+     */
+    limits: UserLimits | undefined;
+    /**
+     * An ordered list of rules that define which modules to import,
+     * and what type to import them as. You will need to specify rules
+     * to use Text, Data, and CompiledWasm modules, or when you wish to
+     * have a .js file be treated as an ESModule instead of CommonJS.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#bundling
+     *
+     * @inheritable
+     */
+    rules: Rule[];
+    /**
+     * Configures a custom build step to be run by Wrangler when building your Worker.
+     *
+     * Refer to the [custom builds documentation](https://developers.cloudflare.com/workers/cli-wrangler/configuration#build)
+     * for more details.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#custom-builds
+     *
+     * @default {watch_dir:"./src"}
+     */
+    build: {
+        /** The command used to build your Worker. On Linux and macOS, the command is executed in the `sh` shell and the `cmd` shell for Windows. The `&&` and `||` shell operators may be used. */
+        command?: string;
+        /** The directory in which the command is executed. */
+        cwd?: string;
+        /** The directory to watch for changes while using wrangler dev, defaults to the current working directory */
+        watch_dir?: string | string[];
+    };
+    /**
+     * Skip internal build steps and directly deploy script
+     * @inheritable
+     */
+    no_bundle: boolean | undefined;
+    /**
+     * Minify the script before uploading.
+     * @inheritable
+     */
+    minify: boolean | undefined;
+    /**
+     * Set the `name` property to the original name for functions and classes renamed during minification.
+     *
+     * See https://esbuild.github.io/api/#keep-names
+     *
+     * @default true
+     * @inheritable
+     */
+    keep_names: boolean | undefined;
+    /**
+     * Designates this Worker as an internal-only "first-party" Worker.
+     *
+     * @inheritable
+     */
+    first_party_worker: boolean | undefined;
+    /**
+     * List of bindings that you will send to logfwdr
+     *
+     * @default {bindings:[]}
+     * @inheritable
+     */
+    logfwdr: {
+        bindings: {
+            /** The binding name used to refer to logfwdr */
+            name: string;
+            /** The destination for this logged message */
+            destination: string;
+        }[];
+    };
+    /**
+     * Send Trace Events from this Worker to Workers Logpush.
+     *
+     * This will not configure a corresponding Logpush job automatically.
+     *
+     * For more information about Workers Logpush, see:
+     * https://blog.cloudflare.com/logpush-for-workers/
+     *
+     * @inheritable
+     */
+    logpush: boolean | undefined;
+    /**
+     * Include source maps when uploading this worker.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#source-maps
+     *
+     * @inheritable
+     */
+    upload_source_maps: boolean | undefined;
+    /**
+     * Specify how the Worker should be located to minimize round-trip time.
+     *
+     * More details: https://developers.cloudflare.com/workers/platform/smart-placement/
+     *
+     * @inheritable
+     */
+    placement: {
+        mode: "off" | "smart";
+        hint?: string;
+    } | {
+        mode?: "targeted";
+        region: string;
+    } | {
+        mode?: "targeted";
+        host: string;
+    } | {
+        mode?: "targeted";
+        hostname: string;
+    } | undefined;
+    /**
+     * Specify the directory of static assets to deploy/serve
+     *
+     * More details at https://developers.cloudflare.com/workers/frameworks/
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#assets
+     *
+     * @inheritable
+     */
+    assets: Assets | undefined;
+    /**
+     * Specify the observability behavior of the Worker.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#observability
+     *
+     * @inheritable
+     */
+    observability: Observability | undefined;
+    /**
+     * Specify the compliance region mode of the Worker.
+     *
+     * Although if the user does not specify a compliance region, the default is `public`,
+     * it can be set to `undefined` in configuration to delegate to the CLOUDFLARE_COMPLIANCE_REGION environment variable.
+     */
+    compliance_region: "public" | "fedramp_high" | undefined;
+    /**
+     * Configuration for Python modules.
+     *
+     * @inheritable
+     */
+    python_modules: {
+        /**
+         * A list of glob patterns to exclude files from the python_modules directory when bundling.
+         *
+         * Patterns are relative to the python_modules directory and use glob syntax.
+         *
+         * @default ["**\*.pyc"]
+         */
+        exclude: string[];
+    };
+}
+type DurableObjectBindings = {
+    /** The name of the binding used to refer to the Durable Object */
+    name: string;
+    /** The exported class name of the Durable Object */
+    class_name: string;
+    /** The script where the Durable Object is defined (if it's external to this Worker) */
+    script_name?: string;
+    /** The service environment of the script_name to bind to */
+    environment?: string;
+}[];
+type WorkflowBinding = {
+    /** The name of the binding used to refer to the Workflow */
+    binding: string;
+    /** The name of the Workflow */
+    name: string;
+    /** The exported class name of the Workflow */
+    class_name: string;
+    /** The script where the Workflow is defined (if it's external to this Worker) */
+    script_name?: string;
+    /** Whether the Workflow should be remote or not in local development */
+    remote?: boolean;
+};
+/**
+ * The `EnvironmentNonInheritable` interface declares all the configuration fields for an environment
+ * that cannot be inherited from the top-level environment, and must be defined specifically.
+ *
+ * If any of these fields are defined at the top-level then they should also be specifically defined
+ * for each named environment.
+ */
+interface EnvironmentNonInheritable {
+    /**
+     * A map of values to substitute when deploying your Worker.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    define: Record<string, string>;
+    /**
+     * A map of environment variables to set when deploying your Worker.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#environment-variables
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    vars: Record<string, string | Json>;
+    /**
+     * A list of durable objects that your Worker should be bound to.
+     *
+     * For more information about Durable Objects, see the documentation at
+     * https://developers.cloudflare.com/workers/learning/using-durable-objects
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#durable-objects
+     *
+     * @default {bindings:[]}
+     * @nonInheritable
+     */
+    durable_objects: {
+        bindings: DurableObjectBindings;
+    };
+    /**
+     * A list of workflows that your Worker should be bound to.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    workflows: WorkflowBinding[];
+    /**
+     * Cloudchamber configuration
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    cloudchamber: CloudchamberConfig;
+    /**
+     * Container related configuration
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    containers?: ContainerApp[];
+    /**
+     * These specify any Workers KV Namespaces you want to
+     * access from inside your Worker.
+     *
+     * To learn more about KV Namespaces,
+     * see the documentation at https://developers.cloudflare.com/workers/learning/how-kv-works
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#kv-namespaces
+     *
+     * @default []
+     * @nonInheritable
+     */
+    kv_namespaces: {
+        /** The binding name used to refer to the KV Namespace */
+        binding: string;
+        /** The ID of the KV namespace */
+        id?: string;
+        /** The ID of the KV namespace used during `wrangler dev` */
+        preview_id?: string;
+        /** Whether the KV namespace should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * These specify bindings to send email from inside your Worker.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#email-bindings
+     *
+     * @default []
+     * @nonInheritable
+     */
+    send_email: {
+        /** The binding name used to refer to the this binding */
+        name: string;
+        /** If this binding should be restricted to a specific verified address */
+        destination_address?: string;
+        /** If this binding should be restricted to a set of verified addresses */
+        allowed_destination_addresses?: string[];
+        /** If this binding should be restricted to a set of sender addresses */
+        allowed_sender_addresses?: string[];
+        /** Whether the binding should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies Queues that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#queues
+     *
+     * @default {consumers:[],producers:[]}
+     * @nonInheritable
+     */
+    queues: {
+        /** Producer bindings */
+        producers?: {
+            /** The binding name used to refer to the Queue in the Worker. */
+            binding: string;
+            /** The name of this Queue. */
+            queue: string;
+            /** The number of seconds to wait before delivering a message */
+            delivery_delay?: number;
+            /** Whether the Queue producer should be remote or not in local development */
+            remote?: boolean;
+        }[];
+        /** Consumer configuration */
+        consumers?: {
+            /** The name of the queue from which this consumer should consume. */
+            queue: string;
+            /** The consumer type, e.g., worker, http-pull, r2-bucket, etc. Default is worker. */
+            type?: string;
+            /** The maximum number of messages per batch */
+            max_batch_size?: number;
+            /** The maximum number of seconds to wait to fill a batch with messages. */
+            max_batch_timeout?: number;
+            /** The maximum number of retries for each message. */
+            max_retries?: number;
+            /** The queue to send messages that failed to be consumed. */
+            dead_letter_queue?: string;
+            /** The maximum number of concurrent consumer Worker invocations. Leaving this unset will allow your consumer to scale to the maximum concurrency needed to keep up with the message backlog. */
+            max_concurrency?: number | null;
+            /** The number of milliseconds to wait for pulled messages to become visible again */
+            visibility_timeout_ms?: number;
+            /** The number of seconds to wait before retrying a message */
+            retry_delay?: number;
+        }[];
+    };
+    /**
+     * Specifies R2 buckets that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#r2-buckets
+     *
+     * @default []
+     * @nonInheritable
+     */
+    r2_buckets: {
+        /** The binding name used to refer to the R2 bucket in the Worker. */
+        binding: string;
+        /** The name of this R2 bucket at the edge. */
+        bucket_name?: string;
+        /** The preview name of this R2 bucket at the edge. */
+        preview_bucket_name?: string;
+        /** The jurisdiction that the bucket exists in. Default if not present. */
+        jurisdiction?: string;
+        /** Whether the R2 bucket should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies D1 databases that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#d1-databases
+     *
+     * @default []
+     * @nonInheritable
+     */
+    d1_databases: {
+        /** The binding name used to refer to the D1 database in the Worker. */
+        binding: string;
+        /** The name of this D1 database. */
+        database_name?: string;
+        /** The UUID of this D1 database (not required). */
+        database_id?: string;
+        /** The UUID of this D1 database for Wrangler Dev (if specified). */
+        preview_database_id?: string;
+        /** The name of the migrations table for this D1 database (defaults to 'd1_migrations'). */
+        migrations_table?: string;
+        /** The path to the directory of migrations for this D1 database (defaults to './migrations'). */
+        migrations_dir?: string;
+        /** Internal use only. */
+        database_internal_env?: string;
+        /** Whether the D1 database should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies Vectorize indexes that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#vectorize-indexes
+     *
+     * @default []
+     * @nonInheritable
+     */
+    vectorize: {
+        /** The binding name used to refer to the Vectorize index in the Worker. */
+        binding: string;
+        /** The name of the index. */
+        index_name: string;
+        /** Whether the Vectorize index should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies Hyperdrive configs that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#hyperdrive
+     *
+     * @default []
+     * @nonInheritable
+     */
+    hyperdrive: {
+        /** The binding name used to refer to the project in the Worker. */
+        binding: string;
+        /** The id of the database. */
+        id: string;
+        /** The local database connection string for `wrangler dev` */
+        localConnectionString?: string;
+    }[];
+    /**
+     * Specifies service bindings (Worker-to-Worker) that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#service-bindings
+     *
+     * @default []
+     * @nonInheritable
+     */
+    services: {
+        /** The binding name used to refer to the bound service. */
+        binding: string;
+        /**
+         * The name of the service.
+         * To bind to a worker in a specific environment,
+         * you should use the format `<worker_name>-<environment_name>`.
+         */
+        service: string;
+        /**
+         * @hidden
+         * @deprecated you should use `service: <worker_name>-<environment_name>` instead.
+         * This refers to the deprecated concept of 'service environments'.
+         * The environment of the service (e.g. production, staging, etc).
+         */
+        environment?: string;
+        /** Optionally, the entrypoint (named export) of the service to bind to. */
+        entrypoint?: string;
+        /** Optional properties that will be made available to the service via ctx.props. */
+        props?: Record<string, unknown>;
+        /** Whether the service binding should be remote or not in local development */
+        remote?: boolean;
+    }[] | undefined;
+    /**
+     * Specifies analytics engine datasets that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#analytics-engine-datasets
+     *
+     * @default []
+     * @nonInheritable
+     */
+    analytics_engine_datasets: {
+        /** The binding name used to refer to the dataset in the Worker. */
+        binding: string;
+        /** The name of this dataset to write to. */
+        dataset?: string;
+    }[];
+    /**
+     * A browser that will be usable from the Worker.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#browser-rendering
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    browser: {
+        binding: string;
+        /** Whether the Browser binding should be remote or not in local development */
+        remote?: boolean;
+    } | undefined;
+    /**
+     * Binding to the AI project.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#workers-ai
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    ai: {
+        binding: string;
+        staging?: boolean;
+        /** Whether the AI binding should be remote or not in local development */
+        remote?: boolean;
+    } | undefined;
+    /**
+     * Binding to Cloudflare Images
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#images
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    images: {
+        binding: string;
+        /** Whether the Images binding should be remote or not in local development */
+        remote?: boolean;
+    } | undefined;
+    /**
+     * Binding to Cloudflare Media Transformations
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    media: {
+        binding: string;
+        /** Whether the Media binding should be remote or not */
+        remote?: boolean;
+    } | undefined;
+    /**
+     * Binding to the Worker Version's metadata
+     */
+    version_metadata: {
+        binding: string;
+    } | undefined;
+    /**
+     * "Unsafe" tables for features that aren't directly supported by wrangler.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default {}
+     * @nonInheritable
+     */
+    unsafe: {
+        /**
+         * A set of bindings that should be put into a Worker's upload metadata without changes. These
+         * can be used to implement bindings for features that haven't released and aren't supported
+         * directly by wrangler or miniflare.
+         */
+        bindings?: UnsafeBinding[];
+        /**
+         * Arbitrary key/value pairs that will be included in the uploaded metadata.  Values specified
+         * here will always be applied to metadata last, so can add new or override existing fields.
+         */
+        metadata?: {
+            [key: string]: unknown;
+        };
+        /**
+         * Used for internal capnp uploads for the Workers runtime
+         */
+        capnp?: {
+            base_path: string;
+            source_schemas: string[];
+            compiled_schema?: never;
+        } | {
+            base_path?: never;
+            source_schemas?: never;
+            compiled_schema: string;
+        };
+    };
+    /**
+     * Specifies a list of mTLS certificates that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#mtls-certificates
+     *
+     * @default []
+     * @nonInheritable
+     */
+    mtls_certificates: {
+        /** The binding name used to refer to the certificate in the Worker */
+        binding: string;
+        /** The uuid of the uploaded mTLS certificate */
+        certificate_id: string;
+        /** Whether the mtls fetcher should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies a list of Tail Workers that are bound to this Worker environment
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    tail_consumers?: TailConsumer[];
+    /**
+     * Specifies a list of Streaming Tail Workers that are bound to this Worker environment
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    streaming_tail_consumers?: StreamingTailConsumer[];
+    /**
+     * Specifies namespace bindings that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#dispatch-namespace-bindings-workers-for-platforms
+     *
+     * @default []
+     * @nonInheritable
+     */
+    dispatch_namespaces: {
+        /** The binding name used to refer to the bound service. */
+        binding: string;
+        /** The namespace to bind to. */
+        namespace: string;
+        /** Details about the outbound Worker which will handle outbound requests from your namespace */
+        outbound?: DispatchNamespaceOutbound;
+        /** Whether the Dispatch Namespace should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies list of Pipelines bound to this Worker environment
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    pipelines: {
+        /** The binding name used to refer to the bound service. */
+        binding: string;
+        /** Name of the Pipeline to bind */
+        pipeline: string;
+        /** Whether the pipeline should be remote or not in local development */
+        remote?: boolean;
+    }[];
+    /**
+     * Specifies Secret Store bindings that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    secrets_store_secrets: {
+        /** The binding name used to refer to the bound service. */
+        binding: string;
+        /** Id of the secret store */
+        store_id: string;
+        /** Name of the secret */
+        secret_name: string;
+    }[];
+    /**
+     * **DO NOT USE**. Hello World Binding Config to serve as an explanatory example.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    unsafe_hello_world: {
+        /** The binding name used to refer to the bound service. */
+        binding: string;
+        /** Whether the timer is enabled */
+        enable_timer?: boolean;
+    }[];
+    /**
+     * Specifies rate limit bindings that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    ratelimits: {
+        /** The binding name used to refer to the rate limiter in the Worker. */
+        name: string;
+        /** The namespace ID for this rate limiter. */
+        namespace_id: string;
+        /** Simple rate limiting configuration. */
+        simple: {
+            /** The maximum number of requests allowed in the time period. */
+            limit: number;
+            /** The time period in seconds (10 for ten seconds, 60 for one minute). */
+            period: 10 | 60;
+        };
+    }[];
+    /**
+     * Specifies Worker Loader bindings that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    worker_loaders: {
+        /** The binding name used to refer to the Worker Loader in the Worker. */
+        binding: string;
+    }[];
+    /**
+     * Specifies VPC services that are bound to this Worker environment.
+     *
+     * NOTE: This field is not automatically inherited from the top level environment,
+     * and so must be specified in every named environment.
+     *
+     * @default []
+     * @nonInheritable
+     */
+    vpc_services: {
+        /** The binding name used to refer to the VPC service in the Worker. */
+        binding: string;
+        /** The service ID of the VPC connectivity service. */
+        service_id: string;
+        /** Whether the VPC service is remote or not */
+        remote?: boolean;
+    }[];
+}
+/**
+ * The raw environment configuration that we read from the config file.
+ *
+ * All the properties are optional, and will be replaced with defaults in the configuration that
+ * is used in the rest of the codebase.
+ */
+type RawEnvironment = Partial<Environment>;
+/**
+ * A bundling resolver rule, defining the modules type for paths that match the specified globs.
+ */
+type Rule = {
+    type: ConfigModuleRuleType;
+    globs: string[];
+    fallthrough?: boolean;
+};
+/**
+ * The possible types for a `Rule`.
+ */
+type ConfigModuleRuleType = "ESModule" | "CommonJS" | "CompiledWasm" | "Text" | "Data" | "PythonModule" | "PythonRequirement";
+type TailConsumer = {
+    /** The name of the service tail events will be forwarded to. */
+    service: string;
+    /** (Optional) The environment of the service. */
+    environment?: string;
+};
+type StreamingTailConsumer = {
+    /** The name of the service streaming tail events will be forwarded to. */
+    service: string;
+};
+interface DispatchNamespaceOutbound {
+    /** Name of the service handling the outbound requests */
+    service: string;
+    /** (Optional) Name of the environment handling the outbound requests. */
+    environment?: string;
+    /** (Optional) List of parameter names, for sending context from your dispatch Worker to the outbound handler */
+    parameters?: string[];
+}
+interface UserLimits {
+    /** Maximum allowed CPU time for a Worker's invocation in milliseconds */
+    cpu_ms: number;
+}
+type Assets = {
+    /** Absolute path to assets directory */
+    directory?: string;
+    /** Name of `env` binding property in the User Worker. */
+    binding?: string;
+    /** How to handle HTML requests. */
+    html_handling?: "auto-trailing-slash" | "force-trailing-slash" | "drop-trailing-slash" | "none";
+    /** How to handle requests that do not match an asset. */
+    not_found_handling?: "single-page-application" | "404-page" | "none";
+    /**
+     * Matches will be routed to the User Worker, and matches to negative rules will go to the Asset Worker.
+     *
+     * Can also be `true`, indicating that every request should be routed to the User Worker.
+     */
+    run_worker_first?: string[] | boolean;
+};
+interface Observability {
+    /** If observability is enabled for this Worker */
+    enabled?: boolean;
+    /** The sampling rate */
+    head_sampling_rate?: number;
+    logs?: {
+        enabled?: boolean;
+        /** The sampling rate */
+        head_sampling_rate?: number;
+        /** Set to false to disable invocation logs */
+        invocation_logs?: boolean;
+        /**
+         * If logs should be persisted to the Cloudflare observability platform where they can be queried in the dashboard.
+         *
+         * @default true
+         */
+        persist?: boolean;
+        /**
+         * What destinations logs emitted from the Worker should be sent to.
+         *
+         * @default []
+         */
+        destinations?: string[];
+    };
+    traces?: {
+        enabled?: boolean;
+        /** The sampling rate */
+        head_sampling_rate?: number;
+        /**
+         * If traces should be persisted to the Cloudflare observability platform where they can be queried in the dashboard.
+         *
+         * @default true
+         */
+        persist?: boolean;
+        /**
+         * What destinations traces emitted from the Worker should be sent to.
+         *
+         * @default []
+         */
+        destinations?: string[];
+    };
+}
+type DockerConfiguration = {
+    /** Socket used by miniflare to communicate with Docker */
+    socketPath: string;
+};
+type ContainerEngine = {
+    localDocker: DockerConfiguration;
+} | string;
+
+/**
+ * This is the static type definition for the configuration object.
+ *
+ * It reflects a normalized and validated version of the configuration that you can write in a Wrangler configuration file,
+ * and optionally augment with arguments passed directly to wrangler.
+ *
+ * For more information about the configuration object, see the
+ * documentation at https://developers.cloudflare.com/workers/cli-wrangler/configuration
+ *
+ * Notes:
+ *
+ * - Fields that are only specified in `ConfigFields` and not `Environment` can only appear
+ *   in the top level config and should not appear in any environments.
+ * - Fields that are specified in `PagesConfigFields` are only relevant for Pages projects
+ * - All top level fields in config and environments are optional in the Wrangler configuration file.
+ *
+ * Legend for the annotations:
+ *
+ * - `@breaking`: the deprecation/optionality is a breaking change from Wrangler v1.
+ * - `@todo`: there's more work to be done (with details attached).
+ */
+type Config = ComputedFields & ConfigFields<DevConfig> & PagesConfigFields & Environment;
+type RawConfig = Partial<ConfigFields<RawDevConfig>> & PagesConfigFields & RawEnvironment & EnvironmentMap & {
+    $schema?: string;
+};
+interface ComputedFields {
+    /** The path to the Wrangler configuration file (if any, and possibly redirected from the user Wrangler configuration) used to create this configuration. */
+    configPath: string | undefined;
+    /** The path to the user's Wrangler configuration file (if any), which may have been redirected to another file that used to create this configuration. */
+    userConfigPath: string | undefined;
+    /**
+     * The original top level name for the Worker in the raw configuration.
+     *
+     * When a raw configuration has been flattened to a single environment the worker name may have been replaced or transformed.
+     * It can be useful to know what the top-level name was before the flattening.
+     */
+    topLevelName: string | undefined;
+    /** A list of environment names declared in the raw configuration. */
+    definedEnvironments: string[] | undefined;
+    /** The name of the environment being targeted. */
+    targetEnvironment: string | undefined;
+}
+interface ConfigFields<Dev extends RawDevConfig> {
+    /**
+     * A boolean to enable "legacy" style wrangler environments (from Wrangler v1).
+     * These have been superseded by Services, but there may be projects that won't
+     * (or can't) use them. If you're using a legacy environment, you can set this
+     * to `true` to enable it.
+     */
+    legacy_env: boolean;
+    /**
+     * Whether Wrangler should send usage metrics to Cloudflare for this project.
+     *
+     * When defined this will override any user settings.
+     * Otherwise, Wrangler will use the user's preference.
+     */
+    send_metrics: boolean | undefined;
+    /**
+     * Options to configure the development server that your worker will use.
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#local-development-settings
+     */
+    dev: Dev;
+    /**
+     * The definition of a Worker Site, a feature that lets you upload
+     * static assets with your Worker.
+     *
+     * More details at https://developers.cloudflare.com/workers/platform/sites
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#workers-sites
+     */
+    site: {
+        /**
+         * The directory containing your static assets.
+         *
+         * It must be a path relative to your Wrangler configuration file.
+         * Example: bucket = "./public"
+         *
+         * If there is a `site` field then it must contain this `bucket` field.
+         */
+        bucket: string;
+        /**
+         * The location of your Worker script.
+         *
+         * @deprecated DO NOT use this (it's a holdover from Wrangler v1.x). Either use the top level `main` field, or pass the path to your entry file as a command line argument.
+         * @breaking
+         */
+        "entry-point"?: string;
+        /**
+         * An exclusive list of .gitignore-style patterns that match file
+         * or directory names from your bucket location. Only matched
+         * items will be uploaded. Example: include = ["upload_dir"]
+         *
+         * @optional
+         * @default []
+         */
+        include?: string[];
+        /**
+         * A list of .gitignore-style patterns that match files or
+         * directories in your bucket that should be excluded from
+         * uploads. Example: exclude = ["ignore_dir"]
+         *
+         * @optional
+         * @default []
+         */
+        exclude?: string[];
+    } | undefined;
+    /**
+     * A list of wasm modules that your worker should be bound to. This is
+     * the "legacy" way of binding to a wasm module. ES module workers should
+     * do proper module imports.
+     */
+    wasm_modules: {
+        [key: string]: string;
+    } | undefined;
+    /**
+     * A list of text files that your worker should be bound to. This is
+     * the "legacy" way of binding to a text file. ES module workers should
+     * do proper module imports.
+     */
+    text_blobs: {
+        [key: string]: string;
+    } | undefined;
+    /**
+     * A list of data files that your worker should be bound to. This is
+     * the "legacy" way of binding to a data file. ES module workers should
+     * do proper module imports.
+     */
+    data_blobs: {
+        [key: string]: string;
+    } | undefined;
+    /**
+     * A map of module aliases. Lets you swap out a module for any others.
+     * Corresponds with esbuild's `alias` config
+     *
+     * For reference, see https://developers.cloudflare.com/workers/wrangler/configuration/#module-aliasing
+     */
+    alias: {
+        [key: string]: string;
+    } | undefined;
+    /**
+     * By default, the Wrangler configuration file is the source of truth for your environment configuration, like a terraform file.
+     *
+     * If you change your vars in the dashboard, wrangler *will* override/delete them on its next deploy.
+     *
+     * If you want to keep your dashboard vars when wrangler deploys, set this field to true.
+     *
+     * @default false
+     * @nonInheritable
+     */
+    keep_vars?: boolean;
+}
+interface PagesConfigFields {
+    /**
+     * The directory of static assets to serve.
+     *
+     * The presence of this field in a Wrangler configuration file indicates a Pages project,
+     * and will prompt the handling of the configuration file according to the
+     * Pages-specific validation rules.
+     */
+    pages_build_output_dir?: string;
+}
+interface DevConfig {
+    /**
+     * IP address for the local dev server to listen on,
+     *
+     * @default localhost
+     */
+    ip: string;
+    /**
+     * Port for the local dev server to listen on
+     *
+     * @default 8787
+     */
+    port: number | undefined;
+    /**
+     * Port for the local dev server's inspector to listen on
+     *
+     * @default 9229
+     */
+    inspector_port: number | undefined;
+    /**
+     * Protocol that local wrangler dev server listens to requests on.
+     *
+     * @default http
+     */
+    local_protocol: "http" | "https";
+    /**
+     * Protocol that wrangler dev forwards requests on
+     *
+     * Setting this to `http` is not currently implemented for remote mode.
+     * See https://github.com/cloudflare/workers-sdk/issues/583
+     *
+     * @default https
+     */
+    upstream_protocol: "https" | "http";
+    /**
+     * Host to forward requests to, defaults to the host of the first route of project
+     */
+    host: string | undefined;
+    /**
+     * When developing, whether to build and connect to containers. This requires a Docker daemon to be running.
+     * Defaults to `true`.
+     *
+     * @default true
+     */
+    enable_containers: boolean;
+    /**
+     * Either the Docker unix socket i.e. `unix:///var/run/docker.sock` or a full configuration.
+     * Note that windows is only supported via WSL at the moment
+     */
+    container_engine: ContainerEngine | undefined;
+}
+type RawDevConfig = Partial<DevConfig>;
+interface EnvironmentMap {
+    /**
+     * The `env` section defines overrides for the configuration for different environments.
+     *
+     * All environment fields can be specified at the top level of the config indicating the default environment settings.
+     *
+     * - Some fields are inherited and overridable in each environment.
+     * - But some are not inherited and must be explicitly specified in every environment, if they are specified at the top level.
+     *
+     * For more information, see the documentation at https://developers.cloudflare.com/workers/cli-wrangler/configuration#environments
+     *
+     * @default {}
+     */
+    env?: {
+        [envName: string]: RawEnvironment;
+    };
+}
+
+/**
+ * Get the Worker `vars` bindings for a `wrangler dev` instance of a Worker.
+ *
+ * The `vars` bindings can be specified in the Wrangler configuration file.
+ * But "secret" `vars` are usually only provided at the server -
+ * either by creating them in the Dashboard UI, or using the `wrangler secret` command.
+ *
+ * It is useful during development, to provide these types of variable locally.
+ * When running `wrangler dev` we will look for a file called `.dev.vars`, situated
+ * next to the User's Wrangler configuration file (or in the current working directory if there is no
+ * Wrangler configuration). If the `--env <env>` option is set, we'll first look for
+ * `.dev.vars.<env>`.
+ *
+ * If there are no `.dev.vars*` file, (and CLOUDFLARE_LOAD_DEV_VARS_FROM_DOT_ENV is not "false")
+ * we will look for `.env*` files in the same directory.
+ * If the `envFiles` option is set, we'll look for the `.env` files at those paths instead of the defaults.
+ *
+ * Any values in these files (all formatted like `.env` files) will add to or override `vars`
+ * bindings provided in the Wrangler configuration file.
+ *
+ * @param configPath - The path to the Wrangler configuration file, if defined.
+ * @param envFiles - An array of paths to .env files to load; if `undefined` the default .env files will be used (see `getDefaultEnvFiles()`).
+ * The `envFiles` paths are resolved against the directory of the Wrangler configuration file, if there is one, otherwise against the current working directory.
+ * @param vars - The existing `vars` bindings from the Wrangler configuration.
+ * @param env - The specific environment name (e.g., "staging") or `undefined` if no specific environment is set.
+ * @param silent - If true, will not log any messages about the loaded .dev.vars files or .env files.
+ * @returns The merged `vars` bindings, including those loaded from `.dev.vars` or `.env` files.
+ */
+declare function getVarsForDev(configPath: string | undefined, envFiles: string[] | undefined, vars: Config$1["vars"], env: string | undefined, silent?: boolean): Config$1["vars"];
+
+/**
+ * Returns the compatibility date to use in development.
+ *
+ * When no compatibility date is configured, uses the installed Workers runtime's latest supported date.
+ *
+ * @param config wrangler configuration
+ * @param compatibilityDate configured compatibility date
+ * @returns the compatibility date to use in development
+ */
+declare function getDevCompatibilityDate(config: Config$1 | undefined, compatibilityDate?: string | undefined): string;
+
+type ConfigurationOptions = {
+    outputDir: string;
+    projectPath: string;
+    workerName: string;
+    dryRun: boolean;
+};
+type PackageJsonScriptsOverrides = {
+    preview?: string;
+    deploy?: string;
+    typegen?: string;
+};
+type ConfigurationResults = {
+    wranglerConfig: RawConfig$1;
+    packageJsonScriptsOverrides?: PackageJsonScriptsOverrides;
+};
+declare abstract class Framework {
+    name: string;
+    constructor(name?: string);
+    /** Some frameworks (i.e. Nuxt) don't need additional configuration */
+    get configured(): boolean;
+    abstract configure(options: ConfigurationOptions): Promise<ConfigurationResults> | ConfigurationResults;
+    configurationDescription?: string;
+}
+
+type AutoConfigDetails = {
+    /** The name of the worker */
+    workerName: string;
+    /** The path to the project (defaults to cwd) */
+    projectPath: string;
+    /** The content of the project's package.json file (if any) */
+    packageJson?: PackageJSON;
+    /** Whether the project is already configured (no autoconfig required) */
+    configured: boolean;
+    /** Details about the detected framework (if any) */
+    framework?: Framework;
+    /** The build command used to build the project (if any) */
+    buildCommand?: string;
+    /** The output directory (if no framework is used, points to the raw asset files) */
+    outputDir?: string;
+};
+type AutoConfigOptions = {
+    /** Whether to run autoconfig without actually applying any filesystem modification (default: false) */
+    dryRun?: boolean;
+    /**
+     * Whether the build command should be run (default: true)
+     *
+     * Note: When `dryRun` is `true` the build command is never run.
+     */
+    runBuild?: boolean;
+    /**
+     * Whether the confirmation prompts should be skipped (default: false)
+     *
+     * Note: When `dryRun` is `true` the the confirmation prompts are always skipped.
+     */
+    skipConfirmations?: boolean;
+};
+type AutoConfigSummary = {
+    scripts: Record<string, string>;
+    wranglerInstall: boolean;
+    wranglerConfig: RawConfig$1;
+    frameworkConfiguration?: string;
+    outputDir: string;
 };
 
 /**
@@ -1000,7 +2504,7 @@ type AutoConfigOptions = {
 declare function getWorkerNameFromProject(projectPath: string): string;
 declare function getDetailsForAutoConfig({ projectPath, wranglerConfig, }?: {
     projectPath?: string;
-    wranglerConfig?: Config;
+    wranglerConfig?: Config$1;
 }): Promise<AutoConfigDetails>;
 
 /**
@@ -1114,7 +2618,7 @@ type StartRemoteProxySessionOptions = {
     workerName?: string;
     auth?: NonNullable<StartDevWorkerInput["dev"]>["auth"];
     /** If running in a non-public compliance region, set this here. */
-    complianceRegion?: Config["compliance_region"];
+    complianceRegion?: Config$1["compliance_region"];
 };
 declare function startRemoteProxySession(bindings: StartDevWorkerInput["bindings"], options?: StartRemoteProxySessionOptions): Promise<RemoteProxySession>;
 type RemoteProxySession = Pick<Worker, "ready" | "dispose"> & {
@@ -1134,9 +2638,9 @@ type WorkerConfigObject = {
     /** The Worker's bindings */
     bindings: NonNullable<StartDevWorkerInput["bindings"]>;
     /** If running in a non-public compliance region, set this here. */
-    complianceRegion?: Config["compliance_region"];
+    complianceRegion?: Config$1["compliance_region"];
     /** Id of the account owning the worker */
-    account_id?: Config["account_id"];
+    account_id?: Config$1["account_id"];
 };
 /**
  * Utility for potentially starting or updating a remote proxy session.
@@ -1209,7 +2713,7 @@ declare class Logger {
  */
 declare function splitSqlQuery(sql: string): string[];
 
-declare function runAutoConfig(autoConfigDetails: AutoConfigDetails, autoConfigOptions?: AutoConfigOptions): Promise<void>;
+declare function runAutoConfig(autoConfigDetails: AutoConfigDetails, autoConfigOptions?: AutoConfigOptions): Promise<AutoConfigSummary>;
 
 /**
  * Make a fetch request, and extract the `result` from the JSON response.
@@ -1306,7 +2810,7 @@ type HandlerContext = {
     /**
      * The wrangler config file read from disk and parsed.
      */
-    config: Config;
+    config: Config$1;
     /**
      * The logger instance provided to the command implementor as a convenience.
      */
@@ -1528,4 +3032,4 @@ interface Unstable_ASSETSBindingsOptions {
 }
 declare const generateASSETSBinding: (opts: Unstable_ASSETSBindingsOptions) => (request: Request) => Promise<Response$1>;
 
-export { type Binding, type GetPlatformProxyOptions, type PlatformProxy, type RemoteProxySession, type SourcelessWorkerOptions, type StartRemoteProxySessionOptions, type Unstable_ASSETSBindingsOptions, type Unstable_DevOptions, type Unstable_DevWorker, type Unstable_MiniflareWorkerOptions, Framework as experimental_AutoConfigFramework, getDetailsForAutoConfig as experimental_getDetailsForAutoConfig, experimental_getWranglerCommands, runAutoConfig as experimental_runAutoConfig, getPlatformProxy, maybeStartOrUpdateRemoteProxySession, startRemoteProxySession, DevEnv as unstable_DevEnv, convertConfigBindingsToStartWorkerBindings as unstable_convertConfigBindingsToStartWorkerBindings, unstable_dev, generateASSETSBinding as unstable_generateASSETSBinding, getDevCompatibilityDate as unstable_getDevCompatibilityDate, getDurableObjectClassNameToUseSQLiteMap as unstable_getDurableObjectClassNameToUseSQLiteMap, unstable_getMiniflareWorkerOptions, getVarsForDev as unstable_getVarsForDev, getWorkerNameFromProject as unstable_getWorkerNameFromProject, unstable_pages, readConfig as unstable_readConfig, splitSqlQuery as unstable_splitSqlQuery, startWorker as unstable_startWorker };
+export { type Binding, type GetPlatformProxyOptions, type PlatformProxy, type RemoteProxySession, type SourcelessWorkerOptions, type StartRemoteProxySessionOptions, type Unstable_ASSETSBindingsOptions, type Config as Unstable_Config, type Unstable_DevOptions, type Unstable_DevWorker, type Unstable_MiniflareWorkerOptions, type RawConfig as Unstable_RawConfig, type RawEnvironment as Unstable_RawEnvironment, Framework as experimental_AutoConfigFramework, getDetailsForAutoConfig as experimental_getDetailsForAutoConfig, experimental_getWranglerCommands, runAutoConfig as experimental_runAutoConfig, getPlatformProxy, maybeStartOrUpdateRemoteProxySession, startRemoteProxySession, DevEnv as unstable_DevEnv, convertConfigBindingsToStartWorkerBindings as unstable_convertConfigBindingsToStartWorkerBindings, unstable_dev, generateASSETSBinding as unstable_generateASSETSBinding, getDevCompatibilityDate as unstable_getDevCompatibilityDate, getDurableObjectClassNameToUseSQLiteMap as unstable_getDurableObjectClassNameToUseSQLiteMap, unstable_getMiniflareWorkerOptions, getVarsForDev as unstable_getVarsForDev, getWorkerNameFromProject as unstable_getWorkerNameFromProject, unstable_pages, readConfig as unstable_readConfig, splitSqlQuery as unstable_splitSqlQuery, startWorker as unstable_startWorker };