wrangler 0.0.0-e0d2f35 → 0.0.0-e101451a2

package/src/inspect.ts

@@ -1,595 +0,0 @@
-import assert from "assert";
-import type { MessageEvent } from "ws";
-import WebSocket, { WebSocketServer } from "ws";
-import type { IncomingMessage, Server, ServerResponse } from "http";
-import { createServer } from "http";
-import { useEffect, useRef, useState } from "react";
-import { version } from "../package.json";
-
-import type Protocol from "devtools-protocol";
-
-/**
- * `useInspector` is a hook for debugging Workers applications
- *  when using `wrangler dev`.
- *
- * When we start a session with `wrangler dev`, the Workers platform
- * also exposes a debugging websocket that implements the DevTools
- * Protocol. While we could just start up DevTools and connect to this
- * URL, that URL changes every time we make a change to the
- * worker, or when the session expires. Instead, we start up a proxy
- * server locally that acts as a bridge between the remote DevTools
- * server and the local DevTools instance. So whenever the URL changes,
- * we can can silently connect to it and keep the local DevTools instance
- * up to date. Further, we also intercept these messages and selectively
- * log them directly to the terminal (namely, calls to `console.<x>`,
- * and exceptions)
- */
-
-/**
- * TODO:
- * - clear devtools whenever we save changes to the worker
- * - clear devtools when we switch between local/remote modes
- * - handle more methods from console
- */
-
-interface InspectorProps {
-  /**
-   * The port that the local proxy server should listen on.
-   */
-  port: number;
-  /**
-   * The websocket URL exposed by Workers that the inspector should connect to.
-   */
-  inspectorUrl: undefined | string;
-  /**
-   * Whether console statements and exceptions should be logged to the terminal.
-   * (We don't log them in local mode because they're already getting
-   * logged to the terminal by nature of them actually running in node locally.)
-   */
-  logToTerminal: boolean;
-}
-
-export default function useInspector(props: InspectorProps) {
-  /** A unique ID for this session. */
-  const inspectorIdRef = useRef(randomId());
-
-  /** The websocket from the devtools instance. */
-  const [localWebSocket, setLocalWebSocket] = useState<WebSocket>();
-  /**  The websocket from the edge */
-  const [remoteWebSocket, setRemoteWebSocket] = useState<WebSocket>();
-
-  /**
-   *  The local proxy server that acts as the bridge between
-   *  the remote websocket and the local DevTools instance.
-   */
-  const serverRef = useRef<Server>();
-  if (serverRef.current === undefined) {
-    serverRef.current = createServer(
-      (req: IncomingMessage, res: ServerResponse) => {
-        switch (req.url) {
-          // We implement a couple of well known end points
-          // that are queried for metadata by chrome://inspect
-          case "/json/version":
-            res.setHeader("Content-Type", "application/json");
-            res.end(
-              JSON.stringify({
-                Browser: `wrangler/v${version}`,
-                // TODO: (someday): The DevTools protocol should match that of Edge Worker.
-                // This could be exposed by the preview API.
-                "Protocol-Version": "1.3",
-              })
-            );
-            return;
-          case "/json":
-          case "/json/list":
-            {
-              res.setHeader("Content-Type", "application/json");
-              const localHost = `localhost:${props.port}/ws`;
-              const devtoolsFrontendUrl = `devtools://devtools/bundled/js_app.html?experiments=true&v8only=true&ws=${localHost}`;
-              const devtoolsFrontendUrlCompat = `devtools://devtools/bundled/inspector.html?experiments=true&v8only=true&ws=${localHost}`;
-              res.end(
-                JSON.stringify([
-                  {
-                    id: inspectorIdRef.current,
-                    type: "node",
-                    description: "workers",
-                    webSocketDebuggerUrl: `ws://${localHost}`,
-                    devtoolsFrontendUrl,
-                    devtoolsFrontendUrlCompat,
-                    // Below are fields that are visible in the DevTools UI.
-                    title: "Cloudflare Worker",
-                    faviconUrl: "https://workers.cloudflare.com/favicon.ico",
-                    url:
-                      "https://" +
-                      (remoteWebSocket
-                        ? new URL(remoteWebSocket.url).host
-                        : "workers.dev"),
-                  },
-                ])
-              );
-            }
-            return;
-          default:
-            break;
-        }
-      }
-    );
-  }
-  const server = serverRef.current;
-
-  /**
-   * The websocket server that runs on top of the proxy server.
-   */
-  const wsServerRef = useRef<WebSocketServer>();
-  if (wsServerRef.current === undefined) {
-    wsServerRef.current = new WebSocketServer({
-      server,
-      clientTracking: true,
-    });
-  }
-  const wsServer = wsServerRef.current;
-
-  wsServer.on("connection", (ws: WebSocket) => {
-    if (wsServer.clients.size > 1) {
-      /** We only want to have one active Devtools instance at a time. */
-      console.error(
-        "Tried to open a new devtools window when a previous one was already open."
-      );
-      ws.close(1013, "Too many clients; only one can be connected at a time");
-    } else {
-      // As promised, save the created websocket in a state hook
-      setLocalWebSocket(ws);
-
-      ws.addEventListener("close", () => {
-        // And and cleanup when devtools closes
-        setLocalWebSocket(undefined);
-      });
-    }
-  });
-
-  /**
-   * We start and stop the server in an effect to take advantage
-   * of the component lifecycle. Convenient.
-   */
-  useEffect(() => {
-    server.listen(props.port);
-    return () => {
-      server.close();
-      // Also disconnect any open websockets/devtools connections
-      wsServer.clients.forEach((ws) => ws.close());
-      wsServer.close();
-    };
-  }, [props.port, server, wsServer]);
-
-  /**
-   * When connecting to the remote websocket, if we don't start either
-   * the devtools instance or make an actual request to the worker in time,
-   * then the connecting process can error out. When this happens, we
-   * want to simply retry the connection. We use a state hook to trigger retries
-   * of the effect that connects to the remote websocket.
-   */
-  const [
-    retryRemoteWebSocketConnectionSigil,
-    setRetryRemoteWebSocketConnectionSigil,
-  ] = useState<number>(0);
-  function retryRemoteWebSocketConnection() {
-    setRetryRemoteWebSocketConnectionSigil((x) => x + 1);
-  }
-
-  /** A simple incrementing id to attach to messages we send to devtools */
-  const messageCounterRef = useRef(1);
-
-  // This effect tracks the connection to the remote websocket
-  // (stored in, no surprises here, `remoteWebSocket`)
-  useEffect(() => {
-    if (!props.inspectorUrl) {
-      return;
-    }
-    // The actual websocket instance
-    const ws = new WebSocket(props.inspectorUrl);
-    setRemoteWebSocket(ws);
-
-    /**
-     * A handle to the interval we run to keep the websocket alive
-     */
-    let keepAliveInterval: NodeJS.Timer;
-
-    /**
-     * Test if the websocket is closed
-     */
-    function isClosed() {
-      return (
-        ws.readyState === WebSocket.CLOSED ||
-        ws.readyState === WebSocket.CLOSING
-      );
-    }
-
-    /**
-     * Send a message to the remote websocket
-     */
-    function send(event: Record<string, unknown>): void {
-      if (!isClosed()) {
-        ws.send(JSON.stringify(event));
-      }
-    }
-
-    /**
-     * Closes the inspector.
-     */
-    function close(): void {
-      if (!isClosed()) {
-        try {
-          ws.close();
-        } catch (err) {
-          // Closing before the websocket is ready will throw an error.
-        }
-      }
-    }
-
-    /**
-     * Since we have a handle on the remote websocket, we can tap
-     * into its events, and log any pertinent ones directly to
-     * the terminal (which means you have insight into your worker
-     * without having to open the devtools).
-     */
-    if (props.logToTerminal) {
-      ws.addEventListener("message", (event: MessageEvent) => {
-        if (typeof event.data === "string") {
-          const evt = JSON.parse(event.data);
-          if (evt.method === "Runtime.exceptionThrown") {
-            const params = evt.params as Protocol.Runtime.ExceptionThrownEvent;
-            console.error(
-              "🚨", // cheesy, but it works
-              // maybe we could use color here too.
-              params.exceptionDetails.text,
-              params.exceptionDetails.exception?.description ?? ""
-            );
-          }
-          if (evt.method === "Runtime.consoleAPICalled") {
-            logConsoleMessage(
-              evt.params as Protocol.Runtime.ConsoleAPICalledEvent
-            );
-          }
-        } else {
-          // We should never get here, but who know is 2022...
-          console.error("unrecognised devtools event:", event);
-        }
-      });
-    }
-
-    ws.addEventListener("open", () => {
-      send({ method: "Runtime.enable", id: messageCounterRef.current });
-      // TODO: This doesn't actually work. Must fix.
-      send({ method: "Network.enable", id: messageCounterRef.current++ });
-
-      keepAliveInterval = setInterval(() => {
-        send({
-          method: "Runtime.getIsolateId",
-          id: messageCounterRef.current++,
-        });
-      }, 10_000);
-    });
-
-    ws.on("unexpected-response", () => {
-      console.log("waiting for connection...");
-      /**
-       * This usually means the worker is not "ready" yet
-       * so we'll just retry the connection process
-       */
-      retryRemoteWebSocketConnection();
-    });
-
-    ws.addEventListener("close", () => {
-      clearInterval(keepAliveInterval);
-    });
-
-    return () => {
-      // clean up! Let's first stop the heartbeat interval
-      clearInterval(keepAliveInterval);
-      // Then we'll send a message to the devtools instance to
-      // tell it to clear the console.
-      wsServer.clients.forEach((client) => {
-        // We could've used `localSocket` here, but
-        // then we would have had to add it to the effect
-        // change detection array, which would have made a
-        // bunch of other stuff complicated. So we'll just
-        // cycle through all of the server's connected clients
-        // (in practice, there should only be one or zero) and send
-        // the Log.clear message.
-        client.send(
-          JSON.stringify({
-            // TODO: This doesn't actually work. Must fix.
-            method: "Log.clear",
-            // we can disable the next eslint warning since
-            // we're referencing a ref that stays alive
-            // eslint-disable-next-line react-hooks/exhaustive-deps
-            id: messageCounterRef.current++,
-            params: {},
-          })
-        );
-      });
-      // Finally, we'll close the websocket
-      close();
-      // And we'll clear `remoteWebsocket`
-      setRemoteWebSocket(undefined);
-    };
-  }, [
-    props.inspectorUrl,
-    props.logToTerminal,
-    wsServer,
-    // We use a state value as a sigil to trigger a retry of the
-    // remote websocket connection. It's not used inside the effect,
-    // so react-hooks/exhaustive-deps doesn't complain if it's not
-    // included in the dependency array. But its presence is critical,
-    // so do NOT remove it from the dependency list.
-    retryRemoteWebSocketConnectionSigil,
-  ]);
-
-  /**
-   * We want to make sure we don't lose any messages we receive from the
-   * remote websocket before devtools connects. So we use a ref to buffer
-   * messages, and flush them whenever devtools connects.
-   */
-  const messageBufferRef = useRef<MessageEvent[]>([]);
-
-  // This effect tracks the state changes _between_ the local
-  // and remote websockets, and handles how messages flow between them.
-  useEffect(() => {
-    /**
-     * This event listener is used for buffering messages from
-     * the remote websocket, and flushing them
-     * when the local websocket connects.
-     */
-    function bufferMessageFromRemoteSocket(event: MessageEvent) {
-      messageBufferRef.current.push(event);
-      // TODO: maybe we should have a max limit on this?
-      // if so, we should be careful when removing messages
-      // from the front, because they could be critical for
-      // devtools (like execution context creation, etc)
-    }
-
-    if (remoteWebSocket && !localWebSocket) {
-      // The local websocket hasn't connected yet, so we'll
-      // buffer messages until it does.
-      remoteWebSocket.addEventListener(
-        "message",
-        bufferMessageFromRemoteSocket
-      );
-    }
-
-    /** Send a message from the local websocket to the remote websocket */
-    function sendMessageToRemoteWebSocket(event: MessageEvent) {
-      try {
-        assert(
-          remoteWebSocket,
-          "Trying to send a message to an undefined `remoteWebSocket`"
-        );
-        remoteWebSocket.send(event.data);
-      } catch (e) {
-        if (e.message !== "WebSocket is not open: readyState 0 (CONNECTING)") {
-          /**
-           * ^ this just means we haven't opened a websocket yet
-           * usually happens until there's at least one request
-           * which is weird, because we may miss something that
-           * happens on the first request. Maybe we should buffer
-           * these messages too?
-           */
-          console.error(e);
-        }
-      }
-    }
-
-    /** Send a message from the local websocket to the remote websocket */
-    function sendMessageToLocalWebSocket(event: MessageEvent) {
-      assert(
-        localWebSocket,
-        "Trying to send a message to an undefined `localWebSocket`"
-      );
-      localWebSocket.send(event.data);
-    }
-
-    if (localWebSocket && remoteWebSocket) {
-      // Both the remote and local websockets are connected, so let's
-      // start sending messages between them.
-      localWebSocket.addEventListener("message", sendMessageToRemoteWebSocket);
-      remoteWebSocket.addEventListener("message", sendMessageToLocalWebSocket);
-
-      // Also, let's flush any buffered messages
-      messageBufferRef.current.forEach(sendMessageToLocalWebSocket);
-      messageBufferRef.current = [];
-    }
-
-    return () => {
-      // Cleanup like good citizens
-      if (remoteWebSocket) {
-        remoteWebSocket.removeEventListener(
-          "message",
-          bufferMessageFromRemoteSocket
-        );
-        remoteWebSocket.removeEventListener(
-          "message",
-          sendMessageToLocalWebSocket
-        );
-      }
-      if (localWebSocket) {
-        localWebSocket.removeEventListener(
-          "message",
-          sendMessageToRemoteWebSocket
-        );
-      }
-    };
-  }, [localWebSocket, remoteWebSocket]);
-}
-
-// Credit: https://stackoverflow.com/a/2117523
-function randomId(): string {
-  return "xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx".replace(/[xy]/g, function (c) {
-    const r = (Math.random() * 16) | 0,
-      v = c == "x" ? r : (r & 0x3) | 0x8;
-    return v.toString(16);
-  });
-}
-
-/**
- * This function converts a message serialised as a devtools event
- * into arguments suitable to be called by a console method, and
- * then actually calls the method with those arguments. Effectively,
- * we're just doing a little bit of the work of the devtools console,
- * directly in the terminal.
- */
-
-export const mapConsoleAPIMessageTypeToConsoleMethod: {
-  [key in Protocol.Runtime.ConsoleAPICalledEvent["type"]]: Exclude<
-    keyof Console,
-    "Console"
-  >;
-} = {
-  log: "log",
-  debug: "debug",
-  info: "info",
-  warning: "warn",
-  error: "error",
-  dir: "dir",
-  dirxml: "dirxml",
-  table: "table",
-  trace: "trace",
-  clear: "clear",
-  count: "count",
-  assert: "assert",
-  profile: "profile",
-  profileEnd: "profileEnd",
-  timeEnd: "timeEnd",
-  startGroup: "group",
-  startGroupCollapsed: "groupCollapsed",
-  endGroup: "groupEnd",
-};
-
-function logConsoleMessage(evt: Protocol.Runtime.ConsoleAPICalledEvent): void {
-  const args: string[] = [];
-  for (const ro of evt.args) {
-    switch (ro.type) {
-      case "string":
-      case "number":
-      case "boolean":
-      case "undefined":
-      case "symbol":
-      case "bigint":
-        args.push(ro.value);
-        break;
-      case "function":
-        args.push(`[Function: ${ro.description ?? "<no-description>"}]`);
-        break;
-      case "object":
-        if (!ro.preview) {
-          args.push(
-            ro.subtype === "null"
-              ? "null"
-              : ro.description ?? "<no-description>"
-          );
-        } else {
-          args.push(ro.preview.description ?? "<no-description>");
-
-          switch (ro.preview.subtype) {
-            case "array":
-              args.push(
-                "[ " +
-                  ro.preview.properties
-                    .map(({ value }) => {
-                      return value;
-                    })
-                    .join(", ") +
-                  (ro.preview.overflow ? "..." : "") +
-                  " ]"
-              );
-
-              break;
-            case "weakmap":
-            case "map":
-              args.push(
-                "{\n" +
-                  // Maps always have entries
-                  // eslint-disable-next-line @typescript-eslint/no-non-null-assertion
-                  ro.preview
-                    .entries!.map(({ key, value }) => {
-                      return `  ${key?.description ?? "<unknown>"} => ${
-                        value.description
-                      }`;
-                    })
-                    .join(",\n") +
-                  (ro.preview.overflow ? "\n  ..." : "") +
-                  "\n}"
-              );
-
-              break;
-            case "weakset":
-            case "set":
-              args.push(
-                "{ " +
-                  // Sets always have entries
-                  // eslint-disable-next-line @typescript-eslint/no-non-null-assertion
-                  ro.preview
-                    .entries!.map(({ value }) => {
-                      return `${value.description}`;
-                    })
-                    .join(", ") +
-                  (ro.preview.overflow ? ", ..." : "") +
-                  " }"
-              );
-              break;
-            case "regexp":
-              break;
-            case "date":
-              break;
-            case "generator":
-              args.push(ro.preview.properties[0].value || "");
-              break;
-            case "promise":
-              if (ro.preview.properties[0].value === "pending") {
-                args.push(`{<${ro.preview.properties[0].value}>}`);
-              } else {
-                args.push(
-                  `{<${ro.preview.properties[0].value}>: ${ro.preview.properties[1].value}}`
-                );
-              }
-              break;
-            case "node":
-            case "iterator":
-            case "proxy":
-            case "typedarray":
-            case "arraybuffer":
-            case "dataview":
-            case "webassemblymemory":
-            case "wasmvalue":
-              break;
-            case "error":
-            default:
-              // just a pojo
-              args.push(
-                "{\n" +
-                  ro.preview.properties
-                    .map(({ name, value }) => {
-                      return `  ${name}: ${value}`;
-                    })
-                    .join(",\n") +
-                  (ro.preview.overflow ? "\n  ..." : "") +
-                  "\n}"
-              );
-          }
-        }
-        break;
-      default:
-        args.push(ro.description || ro.unserializableValue || "🦋");
-        break;
-    }
-  }
-
-  const method = mapConsoleAPIMessageTypeToConsoleMethod[evt.type];
-
-  if (method in console) {
-    // eslint-disable-next-line prefer-spread
-    console[method].apply(console, args);
-  } else {
-    console.warn(`Unsupported console method: ${method}`);
-    console.log("console event:", evt);
-  }
-}