wickes-css2 2.103.0-IC-976-pre-commit-lint.2 → 2.103.0-IC-976-pre-commit-lint.4

package/src/data/how-to-guides/data_how-to_repair-wall.json

@@ -1,387 +1,386 @@
 {
-    "repair_wall": {
-      "title": "How to Repair Walls",
-      "img-link": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Cover-option-3?$ratio21$&fit=crop&extend=0,0,0,500",
-      "how-to-content": [
-        {
-          "title": "Planning & preparation",
-          "list-items": [
-            "A wall can become damaged for many reasons, but luckily carrying out repairs is relatively straightforward. Here we will show you how to patch repair a wall, as well as how to repair small and large holes in plasterboard",
-            "Bear in mind that the application method can vary between products, so it’s always best to check the manufacturer’s instructions",
-            "There are many different fillers and plaster products available, so be sure to consider the range and select a product that is best suited to your job. For example, if you only need a small amount, you might find it easier to use ready mixed plaster",
-            "Thorough preparation is key to achieving a high-quality finish, so be sure to remove all traces of old plaster, dust and grease for the area you plan to repair",
-            "Lay out protective sheets to cover the floor and any nearby furniture",
-            "Turn the radiators off in the room so the plaster doesn’t dry out too quickly",
-            "Some plaster products shouldn’t be applied to a depth of more the 12mm in one go. If this is the case, you may need to make two or more applications",
-            "Most plasterboard comes in either 9.5mm or 12.5mm thickness, so try to replace like-for-like when making repairs",
-            "Have a bucket of water to hand when working so you can clean your trowel as you need to; this will help to avoid lumps and unnecessary work",
-            "For more advice, see our online guides or leaflets ‘How To Plaster a Wall’ and ‘How To Prepare Walls & Ceilings for Decorating’"
-          ]
-        },
-        {
-          "title": "Do it right",
-          "list-items": [
-            "When working with plaster, it's best to only work with small amounts on the hawk and trowel. Try to build up a rhythm so you can cover the patch repair before the plaster starts to set",
-            "Plaster can dry out quickly, so don’t mix up to too large a quantity at any one time"
-          ]
-        },
-        {
-          "title": "Staying safe",
-          "list-items": [
-            "If sanding plaster or cutting plasterboard, be sure to wear goggles and a dust mask and try to work in a well-ventilated space",
-            "Always use a cable, pipe & stud detector before cutting or sawing into areas you’re repairing",
-            "When mixing or applying plaster, wear safety goggles, a dust mask and protective gloves"
-
-          ]
-        },
-        {
-          "title": "Aftercare",
-          "list-items": [
-            "Allow the plaster to dry naturally, so avoid putting your heating on high for a few days",
-            "To prepare the surface for painting, sand with a fine grade sandpaper",
-            "If you are planning to paint the wall, it’s a good idea to apply a sealer or primer paint to help your finishing paint to adhere"
-          ]
-        }
-      ],
-      "aside-list2": [
-        {
-          "title": "What you'll need"
-        },
-        {
-          "title": "Tools",
-          "item-list": [
-            {
-              "text": "Protective Sheet",
-              "url": "/c/1051000"
-            },
-            {
-              "text": "Scraper",
-              "url": "/c/1000564?q=%3AtopSellers%3AType%3AScrapers&text=&Scrapers=Scrapers#"
-            },
-            {
-              "text": "Wire Brush",
-              "url": "/p/600828"
-            },
-            {
-              "text": "Paintbrush",
-              "url": "/c/1007001"
-            },
-            {
-              "text": "Mixing Trowel",
-              "url": "/c/1000414?q=%3AtopSellers%3AType%3ABucket+Trowels&text=&Bucket+Trowels=Bucket+Trowels#"
-            },
-            {
-              "text": "Plasterer’s Hawk",
-              "url": "/c/1002017"
-            },
-            {
-              "text": "Plastering Trowel",
-              "url": "/c/1000414?q=%3AtopSellers%3AType%3APlastering+Trowels&text=&Plastering+Trowels=Plastering+Trowels#"
-            },
-            {
-              "text": "Plasterer’s Finishing Trowel",
-              "url": "/c/1000414?q=%3AtopSellers%3AType%3APlastering+Trowels&text=&Plastering+Trowels=Plastering+Trowels#"
-            },
-            {
-              "text": "Spray Gun",
-              "url": "/p/117879"
-            },
-            {
-              "text": "Bucket",
-              "url": "/p/543007"
-            },
-            {
-              "text": "Cable, Pipe & Stud Detector",
-              "url": "/c/1056003"
-            },
-            {
-              "text": "Plasterboard Saw",
-              "url": "/c/1000402?q=%3AtopSellers%3AType%3APlasterboard+Saws&text=&Plasterboard+Saws=Plasterboard+Saws#"
-            },
-            {
-              "text": "Retractable Knife",
-              "url": "/c/1000410?q=%3AtopSellers%3AType%3ARetractable+Knives&text=&Retractable+Knives=Retractable+Knives#"
-            },
-            {
-              "text": "Flexible Filling Knife",
-              "url": "/c/1000564?q=%3AtopSellers%3AType%3AFilling+Tools&text=&Filling+Tools=Filling+Tools#"
-            },
-            {
-              "text": "Medium Grade Sandpaper",
-              "url": "/c/1000565"
-            },
-            {
-              "text": "Sanding Block",
-              "url": "/c/1000565?q=%3AtopSellers%3AType%3ASanding+Blocks&text=&Sanding+Blocks=Sanding+Blocks#"
-            },
-            {
-              "text": "Tape Measure",
-              "url": "/c/1002013"
-            },
-            {
-              "text": "Metal Ruler or Straight Edge",
-              "url": "/p/500556"
-            },
-            {
-              "text": "Pencil",
-              "url": "/p/143238"
-            },
-            {
-              "text": "Combi Drill",
-              "url": "/c/1000371?q=%3AtopSellers%3AType%3ACombi+Drills&text=&Combi+Drills=Combi+Drills#"
-            },
-            {
-              "text": "Drill Bits",
-              "url": "/c/1000384"
-            },
-            {
-              "text": "Long Spirit Level",
-              "url": "/c/1000404"
-            }
-          ]
-        },
-        {
-          "title": "Materials",
-          "item-list": [
-            {
-              "text": "Quick Setting Patching Plaster",
-              "url": "/p/600241"
-            },
-            {
-              "text": "Ready Mixed Plaster/Filler",
-              "url": "/p/138951"
-            },
-            {
-              "text": "Wooden Batten",
-              "url": "/c/1000175"
-            },
-            {
-              "text": "Plasterboard/Plasterboard Offcuts",
-              "url": "/c/1000220"
-            },
-            {
-              "text": "Plasterboard Repair & Jointing Tape",
-              "url": "/c/1000222?q=%3AtopSellers%3AType%3AJointing+Tapes&text=&Jointing+Tapes=Jointing+Tapes#"
-            },
-            {
-              "text": "Grab Adhesive",
-              "url": "/c/1004011"
-            },
-            {
-              "text": "Nail",
-              "url": "/c/1000187"
-            },
-            {
-              "text": "40mm Wood Screws",
-              "url": "/c/1022000?q=%3AtopSellers%3ALength%3A40+mm&text=&40+mm=40+mm#"
-            },
-            {
-              "text": "32mm Drywall Screws",
-              "url": "/c/1000289?q=%3AtopSellers%3ALength%3A32+mm&text=&32+mm=32+mm#"
-            }
-          ]
-        },
-        {
-          "title": "Safety",
-          "item-list": [
-            {
-              "text": "Dust Mask",
-              "url": "/c/1000432"
-            },
-            {
-              "text": "Safety Goggles",
-              "url": "/c/1000437?q=%3AtopSellers%3AType%3AGoggles&text=&Goggles=Goggles#"
-            },
-            {
-              "text": "Protective Gloves",
-              "url": "/c/1000440"
-            }
-          ]
-        },
-        {
-          "title": "Useful links",
-          "item-list": [
-            {
-              "$ref" : "links/data_main-page-data.json#/page_links/how_to_prepare_walls_ceilings_for_decorating"
-            },
-            {
-              "$ref" : "links/data_main-page-data.json#/page_links/how_to_plaster_a_wall"
-            },
-            {
-              "$ref" : "links/data_main-page-data.json#/page_links/how_to_paint_a_room"
-            }
-          ]
-        }
-      ],
-      "accordions": [
-        {
-          "section-title": "Patch repair plaster to solid walls",
-          "title": "Step 1",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-1?$ratio21$&fit=crop",
-          "text": "Remove any damaged or loose plaster with a scraper. Then, use a wire brush to clean the area."
-        },
-        {
-          "title": "Step 2",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-2?$ratio21$&fit=crop",
-          "text": "Thoroughly dampen the surface surrounding the repair with a mix of PVA glue and water."
-        },
-        {
-          "title": "Step 3",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-3?$ratio21$&fit=crop&extend=0,-200,0,0",
-          "text": "Following the manufacturer's instructions, mix the quick-drying patch plaster."
-        },
-        {
-          "title": "Step 4",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-4?$ratio21$&fit=crop&extend=0,-200,0,0",
-          "text": "Using a plastering trowel, transfer a section of plaster to the plasterer’s hawk."
-        },
-        {
-          "title": "Step 5",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-5?$ratio21$&fit=crop",
-          "text": "Cut a small section of plaster onto the plastering trowel and apply to the repair with vertical and horizontal movements. Press firmly to work the plaster into the damaged area."
-        },
-        {
-          "title": "Step 6",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-6?$ratio21$&fit=crop",
-          "text": "Following the manufacturer's instructions, leave the plaster to dry. Once the plaster is dry, use a spray gun or paint brush to dampen the surface with clean water."
-        },
-        {
-          "title": "Step 7",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-7?$ratio21$&fit=crop",
-          "text": "Using the edge of a clean trowel, work across the plaster repair to smooth the finish. Repeat this process if advised by the manufacturer."
-        },
-        {
-          "section-title": "Repair small holes in plasterboard",
-          "title": "Step 1",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-1?$ratio21$&fit=crop",
-          "text": "Check the area around the repair with a cable, pipe & stud detector to make sure it’s safe to cut through the old plasterboard."
-        },
-        {
-          "title": "Step 2",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-2?$ratio21$&fit=crop",
-          "text": "Measure the hole then clearly mark the measurements onto a piece of plasterboard offcut."
-        },
-        {
-          "title": "Step 3",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-3?$ratio21$&fit=crop",
-          "text": "Add an extra 25mm at the top and bottom, then cut the offcut to size with a plasterboard saw or retractable knife."
-        },
-        {
-          "title": "Step 4",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-4?$ratio21$&fit=crop",
-          "text": "Using a pencil and straight edge, mark the original measurements (without the additional 25mm overhangs) onto the wall."
-        },
-        {
-          "title": "Step 5",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-5?$ratio21$&fit=crop",
-          "text": "Draw diagonal lines from the hole into each corner. Then, use a plasterboard saw to cut along the diagonal lines."
-        },
-        {
-          "title": "Step 6",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-6?$ratio21$&fit=crop",
-          "text": "Using a retractable knife and straight edge, score the plasterboard along the guide marks and remove the excess plasterboard."
-        },
-        {
-          "title": "Step 7",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-7?$ratio21$&fit=crop",
-          "text": "Drill a hole that is big enough to easily accommodate a nail into the centre of the plasterboard offcut. Then place a nail into the hole."
-        },
-        {
-          "title": "Step 8",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-8?$ratio21$&fit=crop",
-          "text": "Apply a bead of grab adhesive to the 25mm overhang at the top and bottom of the offcut and carefully slide the offcut through the hole and into position."
-        },
-        {
-          "title": "Step 9",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-9?$ratio21$&fit=crop",
-          "text": "Pull the nail towards you to create a strong bond between the adhesive and the plasterboard. Don’t let go of the nail until the adhesive has bonded. Allow the adhesive to dry fully before continuing."
-        },
-        {
-          "title": "Step 10",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-10?$ratio21$&fit=crop",
-          "text": "Once the adhesive has dried, push the nail out so it falls behind the plasterboard."
-        },
-        {
-          "title": "Step 11",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-11?$ratio21$&fit=crop",
-          "text": "Mix and apply the repair plaster or ready mixed filler. Apply to the hole with a flexible filling knife, working both vertically and horizontally and ensuring you fill the hole until level with the plasterboard."
-        },
-        {
-          "title": "Step 12",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-12?$ratio21$&fit=crop",
-          "text": "When dry, use medium grade sandpaper and sanding block to create a smooth, level finish."
-        },
-        {
-          "section-title": "Repair large holes in plasterboard",
-          "title": "Step 1",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-1?$ratio21$&fit=crop",
-          "text": "To make sure it’s safe to work, check around the repair area with a cable & pipe detector."
-        },
-        {
-          "title": "Step 2",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-2?$ratio21$&fit=crop",
-          "text": "Use a stud detector or place a metal ruler inside the hole to locate the position of the studs on both sides. Mark roughly where the centre of the studs are onto the plasterboard wall."
-        },
-        {
-          "title": "Step 3",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-3?$ratio21$&fit=crop",
-          "text": "Using a straight edge or spirit level, extend the marks and draw vertical lines that run higher and lower than the damaged area."
-        },
-        {
-          "title": "Step 4",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-4?$ratio21$&fit=crop",
-          "text": "Then, draw horizontal lines 50mm above and below the damaged area, so they join to the vertical lines and create a rectangle."
-        },
-        {
-          "title": "Step 5",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-5?$ratio21$&fit=crop",
-          "text": "Mark diagonal lines into each corner and cut along them with a plasterboard saw."
-        },
-        {
-          "title": "Step 6",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-6?$ratio21$&fit=crop",
-          "text": "Use a retractable knife and straight edge to score along the horizontal and vertical lines so you can remove the entire damaged area."
-        },
-        {
-          "title": "Step 7",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-7?$ratio21$&fit=crop",
-          "text": "Measure the distance between the two studs and cut two lengths of batten to size."
-        },
-        {
-          "title": "Step 8",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-8?$ratio21$&fit=crop",
-          "text": "First, drill the pilot holes. Then, using a combi-drill, secure the batten in position by skewing 40mm screws through the batten and into the studs to create support noggings at the top and bottom of the hole."
-        },
-        {
-          "title": "Step 9",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-9?$ratio21$&fit=crop",
-          "text": "Carefully measure and cut a section of plasterboard to fit the space."
-        },
-        {
-          "title": "Step 10",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-10?$ratio21$&fit=crop",
-          "text": "Attach the section of plasterboard to the studs and noggings with 32mm drywall screws."
-        },
-        {
-          "title": "Step 11",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-11?$ratio21$&fit=crop",
-          "text": "Then, secure the original plasterboard to the studs and noggings with 32mm drywall screws."
-        },
-        {
-          "title": "Step 12",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-12?$ratio21$&fit=crop",
-          "text": "To help make the seam invisible and to prevent future cracking, carefully apply jointing tape, so that the tape overlaps the join."
-        },
-        {
-          "title": "Step 13",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-13?$ratio21$&fit=crop",
-          "text": "Following the manufacturer’s instructions, mix the finishing plaster. Apply it with a plasterer’s finishing trowel, ensuring all the jointing tape is covered."
-        },
-        {
-          "title": "Step 14",
-          "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-14?$ratio21$&fit=crop",
-          "text": "Allow to dry and then use medium grade sandpaper and a sanding block to create a smooth and level surface."
-        }
-      ]
-    }
+  "repair_wall": {
+    "title": "How to Repair Walls",
+    "img-link": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Cover-option-3?$ratio21$&fit=crop&extend=0,0,0,500",
+    "how-to-content": [
+      {
+        "title": "Planning & preparation",
+        "list-items": [
+          "A wall can become damaged for many reasons, but luckily carrying out repairs is relatively straightforward. Here we will show you how to patch repair a wall, as well as how to repair small and large holes in plasterboard",
+          "Bear in mind that the application method can vary between products, so it’s always best to check the manufacturer’s instructions",
+          "There are many different fillers and plaster products available, so be sure to consider the range and select a product that is best suited to your job. For example, if you only need a small amount, you might find it easier to use ready mixed plaster",
+          "Thorough preparation is key to achieving a high-quality finish, so be sure to remove all traces of old plaster, dust and grease for the area you plan to repair",
+          "Lay out protective sheets to cover the floor and any nearby furniture",
+          "Turn the radiators off in the room so the plaster doesn’t dry out too quickly",
+          "Some plaster products shouldn’t be applied to a depth of more the 12mm in one go. If this is the case, you may need to make two or more applications",
+          "Most plasterboard comes in either 9.5mm or 12.5mm thickness, so try to replace like-for-like when making repairs",
+          "Have a bucket of water to hand when working so you can clean your trowel as you need to; this will help to avoid lumps and unnecessary work",
+          "For more advice, see our online guides or leaflets ‘How To Plaster a Wall’ and ‘How To Prepare Walls & Ceilings for Decorating’"
+        ]
+      },
+      {
+        "title": "Do it right",
+        "list-items": [
+          "When working with plaster, it's best to only work with small amounts on the hawk and trowel. Try to build up a rhythm so you can cover the patch repair before the plaster starts to set",
+          "Plaster can dry out quickly, so don’t mix up to too large a quantity at any one time"
+        ]
+      },
+      {
+        "title": "Staying safe",
+        "list-items": [
+          "If sanding plaster or cutting plasterboard, be sure to wear goggles and a dust mask and try to work in a well-ventilated space",
+          "Always use a cable, pipe & stud detector before cutting or sawing into areas you’re repairing",
+          "When mixing or applying plaster, wear safety goggles, a dust mask and protective gloves"
+        ]
+      },
+      {
+        "title": "Aftercare",
+        "list-items": [
+          "Allow the plaster to dry naturally, so avoid putting your heating on high for a few days",
+          "To prepare the surface for painting, sand with a fine grade sandpaper",
+          "If you are planning to paint the wall, it’s a good idea to apply a sealer or primer paint to help your finishing paint to adhere"
+        ]
+      }
+    ],
+    "aside-list2": [
+      {
+        "title": "What you'll need"
+      },
+      {
+        "title": "Tools",
+        "item-list": [
+          {
+            "text": "Protective Sheet",
+            "url": "/c/1051000"
+          },
+          {
+            "text": "Scraper",
+            "url": "/c/1000564?q=%3AtopSellers%3AType%3AScrapers&text=&Scrapers=Scrapers#"
+          },
+          {
+            "text": "Wire Brush",
+            "url": "/p/600828"
+          },
+          {
+            "text": "Paintbrush",
+            "url": "/c/1007001"
+          },
+          {
+            "text": "Mixing Trowel",
+            "url": "/c/1000414?q=%3AtopSellers%3AType%3ABucket+Trowels&text=&Bucket+Trowels=Bucket+Trowels#"
+          },
+          {
+            "text": "Plasterer’s Hawk",
+            "url": "/c/1002017"
+          },
+          {
+            "text": "Plastering Trowel",
+            "url": "/c/1000414?q=%3AtopSellers%3AType%3APlastering+Trowels&text=&Plastering+Trowels=Plastering+Trowels#"
+          },
+          {
+            "text": "Plasterer’s Finishing Trowel",
+            "url": "/c/1000414?q=%3AtopSellers%3AType%3APlastering+Trowels&text=&Plastering+Trowels=Plastering+Trowels#"
+          },
+          {
+            "text": "Spray Gun",
+            "url": "/p/117879"
+          },
+          {
+            "text": "Bucket",
+            "url": "/p/543007"
+          },
+          {
+            "text": "Cable, Pipe & Stud Detector",
+            "url": "/c/1056003"
+          },
+          {
+            "text": "Plasterboard Saw",
+            "url": "/c/1000402?q=%3AtopSellers%3AType%3APlasterboard+Saws&text=&Plasterboard+Saws=Plasterboard+Saws#"
+          },
+          {
+            "text": "Retractable Knife",
+            "url": "/c/1000410?q=%3AtopSellers%3AType%3ARetractable+Knives&text=&Retractable+Knives=Retractable+Knives#"
+          },
+          {
+            "text": "Flexible Filling Knife",
+            "url": "/c/1000564?q=%3AtopSellers%3AType%3AFilling+Tools&text=&Filling+Tools=Filling+Tools#"
+          },
+          {
+            "text": "Medium Grade Sandpaper",
+            "url": "/c/1000565"
+          },
+          {
+            "text": "Sanding Block",
+            "url": "/c/1000565?q=%3AtopSellers%3AType%3ASanding+Blocks&text=&Sanding+Blocks=Sanding+Blocks#"
+          },
+          {
+            "text": "Tape Measure",
+            "url": "/c/1002013"
+          },
+          {
+            "text": "Metal Ruler or Straight Edge",
+            "url": "/p/500556"
+          },
+          {
+            "text": "Pencil",
+            "url": "/p/143238"
+          },
+          {
+            "text": "Combi Drill",
+            "url": "/c/1000371?q=%3AtopSellers%3AType%3ACombi+Drills&text=&Combi+Drills=Combi+Drills#"
+          },
+          {
+            "text": "Drill Bits",
+            "url": "/c/1000384"
+          },
+          {
+            "text": "Long Spirit Level",
+            "url": "/c/1000404"
+          }
+        ]
+      },
+      {
+        "title": "Materials",
+        "item-list": [
+          {
+            "text": "Quick Setting Patching Plaster",
+            "url": "/p/600241"
+          },
+          {
+            "text": "Ready Mixed Plaster/Filler",
+            "url": "/p/138951"
+          },
+          {
+            "text": "Wooden Batten",
+            "url": "/c/1000175"
+          },
+          {
+            "text": "Plasterboard/Plasterboard Offcuts",
+            "url": "/c/1000220"
+          },
+          {
+            "text": "Plasterboard Repair & Jointing Tape",
+            "url": "/c/1000222?q=%3AtopSellers%3AType%3AJointing+Tapes&text=&Jointing+Tapes=Jointing+Tapes#"
+          },
+          {
+            "text": "Grab Adhesive",
+            "url": "/c/1004011"
+          },
+          {
+            "text": "Nail",
+            "url": "/c/1000187"
+          },
+          {
+            "text": "40mm Wood Screws",
+            "url": "/c/1022000?q=%3AtopSellers%3ALength%3A40+mm&text=&40+mm=40+mm#"
+          },
+          {
+            "text": "32mm Drywall Screws",
+            "url": "/c/1000289?q=%3AtopSellers%3ALength%3A32+mm&text=&32+mm=32+mm#"
+          }
+        ]
+      },
+      {
+        "title": "Safety",
+        "item-list": [
+          {
+            "text": "Dust Mask",
+            "url": "/c/1000432"
+          },
+          {
+            "text": "Safety Goggles",
+            "url": "/c/1000437?q=%3AtopSellers%3AType%3AGoggles&text=&Goggles=Goggles#"
+          },
+          {
+            "text": "Protective Gloves",
+            "url": "/c/1000440"
+          }
+        ]
+      },
+      {
+        "title": "Useful links",
+        "item-list": [
+          {
+            "$ref": "links/data_main-page-data.json#/page_links/how_to_prepare_walls_ceilings_for_decorating"
+          },
+          {
+            "$ref": "links/data_main-page-data.json#/page_links/how_to_plaster_a_wall"
+          },
+          {
+            "$ref": "links/data_main-page-data.json#/page_links/how_to_paint_a_room"
+          }
+        ]
+      }
+    ],
+    "accordions": [
+      {
+        "section-title": "Patch repair plaster to solid walls",
+        "title": "Step 1",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-1?$ratio21$&fit=crop",
+        "text": "Remove any damaged or loose plaster with a scraper. Then, use a wire brush to clean the area."
+      },
+      {
+        "title": "Step 2",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-2?$ratio21$&fit=crop",
+        "text": "Thoroughly dampen the surface surrounding the repair with a mix of PVA glue and water."
+      },
+      {
+        "title": "Step 3",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-3?$ratio21$&fit=crop&extend=0,-200,0,0",
+        "text": "Following the manufacturer's instructions, mix the quick-drying patch plaster."
+      },
+      {
+        "title": "Step 4",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-4?$ratio21$&fit=crop&extend=0,-200,0,0",
+        "text": "Using a plastering trowel, transfer a section of plaster to the plasterer’s hawk."
+      },
+      {
+        "title": "Step 5",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-5?$ratio21$&fit=crop",
+        "text": "Cut a small section of plaster onto the plastering trowel and apply to the repair with vertical and horizontal movements. Press firmly to work the plaster into the damaged area."
+      },
+      {
+        "title": "Step 6",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-6?$ratio21$&fit=crop",
+        "text": "Following the manufacturer's instructions, leave the plaster to dry. Once the plaster is dry, use a spray gun or paint brush to dampen the surface with clean water."
+      },
+      {
+        "title": "Step 7",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Patch-Plaster-7?$ratio21$&fit=crop",
+        "text": "Using the edge of a clean trowel, work across the plaster repair to smooth the finish. Repeat this process if advised by the manufacturer."
+      },
+      {
+        "section-title": "Repair small holes in plasterboard",
+        "title": "Step 1",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-1?$ratio21$&fit=crop",
+        "text": "Check the area around the repair with a cable, pipe & stud detector to make sure it’s safe to cut through the old plasterboard."
+      },
+      {
+        "title": "Step 2",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-2?$ratio21$&fit=crop",
+        "text": "Measure the hole then clearly mark the measurements onto a piece of plasterboard offcut."
+      },
+      {
+        "title": "Step 3",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-3?$ratio21$&fit=crop",
+        "text": "Add an extra 25mm at the top and bottom, then cut the offcut to size with a plasterboard saw or retractable knife."
+      },
+      {
+        "title": "Step 4",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-4?$ratio21$&fit=crop",
+        "text": "Using a pencil and straight edge, mark the original measurements (without the additional 25mm overhangs) onto the wall."
+      },
+      {
+        "title": "Step 5",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-5?$ratio21$&fit=crop",
+        "text": "Draw diagonal lines from the hole into each corner. Then, use a plasterboard saw to cut along the diagonal lines."
+      },
+      {
+        "title": "Step 6",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-6?$ratio21$&fit=crop",
+        "text": "Using a retractable knife and straight edge, score the plasterboard along the guide marks and remove the excess plasterboard."
+      },
+      {
+        "title": "Step 7",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-7?$ratio21$&fit=crop",
+        "text": "Drill a hole that is big enough to easily accommodate a nail into the centre of the plasterboard offcut. Then place a nail into the hole."
+      },
+      {
+        "title": "Step 8",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-8?$ratio21$&fit=crop",
+        "text": "Apply a bead of grab adhesive to the 25mm overhang at the top and bottom of the offcut and carefully slide the offcut through the hole and into position."
+      },
+      {
+        "title": "Step 9",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-9?$ratio21$&fit=crop",
+        "text": "Pull the nail towards you to create a strong bond between the adhesive and the plasterboard. Don’t let go of the nail until the adhesive has bonded. Allow the adhesive to dry fully before continuing."
+      },
+      {
+        "title": "Step 10",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-10?$ratio21$&fit=crop",
+        "text": "Once the adhesive has dried, push the nail out so it falls behind the plasterboard."
+      },
+      {
+        "title": "Step 11",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-11?$ratio21$&fit=crop",
+        "text": "Mix and apply the repair plaster or ready mixed filler. Apply to the hole with a flexible filling knife, working both vertically and horizontally and ensuring you fill the hole until level with the plasterboard."
+      },
+      {
+        "title": "Step 12",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Small-Hole-12?$ratio21$&fit=crop",
+        "text": "When dry, use medium grade sandpaper and sanding block to create a smooth, level finish."
+      },
+      {
+        "section-title": "Repair large holes in plasterboard",
+        "title": "Step 1",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-1?$ratio21$&fit=crop",
+        "text": "To make sure it’s safe to work, check around the repair area with a cable & pipe detector."
+      },
+      {
+        "title": "Step 2",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-2?$ratio21$&fit=crop",
+        "text": "Use a stud detector or place a metal ruler inside the hole to locate the position of the studs on both sides. Mark roughly where the centre of the studs are onto the plasterboard wall."
+      },
+      {
+        "title": "Step 3",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-3?$ratio21$&fit=crop",
+        "text": "Using a straight edge or spirit level, extend the marks and draw vertical lines that run higher and lower than the damaged area."
+      },
+      {
+        "title": "Step 4",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-4?$ratio21$&fit=crop",
+        "text": "Then, draw horizontal lines 50mm above and below the damaged area, so they join to the vertical lines and create a rectangle."
+      },
+      {
+        "title": "Step 5",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-5?$ratio21$&fit=crop",
+        "text": "Mark diagonal lines into each corner and cut along them with a plasterboard saw."
+      },
+      {
+        "title": "Step 6",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-6?$ratio21$&fit=crop",
+        "text": "Use a retractable knife and straight edge to score along the horizontal and vertical lines so you can remove the entire damaged area."
+      },
+      {
+        "title": "Step 7",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-7?$ratio21$&fit=crop",
+        "text": "Measure the distance between the two studs and cut two lengths of batten to size."
+      },
+      {
+        "title": "Step 8",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-8?$ratio21$&fit=crop",
+        "text": "First, drill the pilot holes. Then, using a combi-drill, secure the batten in position by skewing 40mm screws through the batten and into the studs to create support noggings at the top and bottom of the hole."
+      },
+      {
+        "title": "Step 9",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-9?$ratio21$&fit=crop",
+        "text": "Carefully measure and cut a section of plasterboard to fit the space."
+      },
+      {
+        "title": "Step 10",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-10?$ratio21$&fit=crop",
+        "text": "Attach the section of plasterboard to the studs and noggings with 32mm drywall screws."
+      },
+      {
+        "title": "Step 11",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-11?$ratio21$&fit=crop",
+        "text": "Then, secure the original plasterboard to the studs and noggings with 32mm drywall screws."
+      },
+      {
+        "title": "Step 12",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-12?$ratio21$&fit=crop",
+        "text": "To help make the seam invisible and to prevent future cracking, carefully apply jointing tape, so that the tape overlaps the join."
+      },
+      {
+        "title": "Step 13",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-13?$ratio21$&fit=crop",
+        "text": "Following the manufacturer’s instructions, mix the finishing plaster. Apply it with a plasterer’s finishing trowel, ensuring all the jointing tape is covered."
+      },
+      {
+        "title": "Step 14",
+        "src": "https://media.wickes.co.uk/is/image/wickes/2018-Wickes-How-To-Repair-Walls-Large-Hole-14?$ratio21$&fit=crop",
+        "text": "Allow to dry and then use medium grade sandpaper and a sanding block to create a smooth and level surface."
+      }
+    ]
+  }
 }