vxe-table 3.8.22 → 3.8.23

package/lib/locale/lang/es-ES.umd.js

@@ -21,12 +21,15 @@
     vxe: {
       base: {
         pleaseInput: 'Please input',
-        pleaseSelect: 'Select'
+        pleaseSelect: 'Select',
+        comma: ',',
+        fullStop: '.'
       },
       loading: {
         text: 'Cargando...'
       },
       error: {
+        downErr: 'Download failed.',
         groupFixed: 'If you use group headers, the freeze columns must be set by group.',
         groupMouseRange: 'Los encabezados de agrupación y "{0}" no pueden ser utilizados al mismo tiempo, lo que puede causar errores.',
         groupTag: 'El encabezado de columna de agrupación debería utilizar "{0}" en lugar de "{1}", lo que puede causar errores.',
@@ -36,6 +39,7 @@
         useErr: 'Error al instalar el módulo "{0}", posiblemente en el orden equivocado, los módulos dependientes deben ser instalados antes de la tabla.',
         barUnableLink: 'La barra de herramientas no puede asociarse con la tabla.',
         expandContent: 'La ranura de fila expandible debería ser "contenido", por favor revise si está correcta.',
+        reqComp: 'Require "{0}" component, check whether the install is correct. https://vxeui.com/#/start/useGlobal',
         reqModule: 'Requerir el módulo "{0}".',
         reqProp: 'Falta el parámetro necesario "{0}", lo que puede causar errores.',
         emptyProp: 'La propiedad "{0}" no se permite estar vacía.',
@@ -50,7 +54,8 @@
         noTree: 'La estructura de árbol no soporta "{0}".',
         notProp: 'Parámetros no compatibles "{0}"',
         checkProp: 'La casilla de verificación puede detenerse cuando la cantidad de datos es demasiado grande, se recomienda establecer el parámetro "{0}" para aumentar la velocidad de representación',
-        coverProp: 'The parameter "{1}" to "{0}" is repeatedly defined. This may cause an error',
+        coverProp: 'The parameter "{1}" to "{0}" is repeatedly defined. This may cause an error.',
+        uniField: 'The field "{0}" is repeatedly defined, which may cause an error.',
         delFunc: 'La función "{0}" está en desuso, por favor use "{1}".',
         delProp: 'La propiedad "{0}" está en desuso, por favor use "{1}".',
         delEvent: 'El evento "{0}" está en desuso, por favor use "{1}"',
@@ -64,7 +69,8 @@
       table: {
         emptyText: 'No hay datos',
         allTitle: 'Seleccionar todo / cancelar',
-        seqTitle: 'S/N',
+        seqTitle: 'N/S',
+        actionTitle: 'Action',
         confirmFilter: 'Confirmar',
         resetFilter: 'Restablecer',
         allFilter: 'Todo',
@@ -78,9 +84,10 @@
         expOriginFilename: 'Exportar_original_{0}',
         customTitle: 'Configuraciones de columna',
         customAll: 'Todo',
-        customConfirm: 'Confirmar',
+        customConfirm: 'Confirm',
+        customClose: 'Close',
         customCancel: 'Cancel',
-        customRestore: 'Restore default',
+        customRestore: 'Restore',
         maxFixedCol: 'The maximum number of Freeze columns cannot exceed {0}'
       },
       grid: {
@@ -138,7 +145,7 @@
           sortHelpTip: 'Click and drag the icon to adjust the order of the columns.',
           colTitle: 'Title',
           colResizable: 'Column width (px)',
-          colVisible: 'Visible',
+          colVisible: 'Display',
           colFixed: 'Freeze columns',
           colFixedMax: 'Freeze columns (Max {0})',
           fixedLeft: 'Left',
@@ -207,8 +214,14 @@
         expCancel: 'Cancelar'
       },
       modal: {
-        zoomIn: 'Maximizar',
+        errTitle: 'Error',
+        zoomMin: 'Minimize',
+        zoomIn: 'Maximize',
         zoomOut: 'Reducir',
+        close: 'Cerrar',
+        miniMaxSize: 'The number of minimized Windows cannot exceed {0}.'
+      },
+      drawer: {
         close: 'Cerrar'
       },
       form: {
@@ -288,11 +301,189 @@
           }
         }
       },
+      imagePreview: {
+        popupTitle: 'Preview',
+        operBtn: {
+          zoomOut: 'Reduce',
+          zoomIn: 'Enlarge',
+          pctFull: 'Proportional scaling',
+          pct11: 'Show original size',
+          rotateLeft: 'Rotate left',
+          rotateRight: 'Rotate right',
+          print: 'Click to print',
+          download: 'Click to download'
+        }
+      },
+      upload: {
+        fileBtnText: 'Click or drag',
+        imgBtnText: 'Click or drag',
+        dragPlaceholder: 'Please drag and drop the file into this area to upload it.',
+        imgSizeHint: 'Single {0}',
+        imgCountHint: 'Up to {0}',
+        fileTypeHint: 'Support {0} file types',
+        fileSizeHint: 'Single file size does not exceed {0}',
+        fileCountHint: 'Up to {0} file can be uploaded',
+        overCountErr: 'You can only choose {0} file!',
+        overCountExtraErr: 'It has exceeded the maximum number {0}, and more than {0} file will be ignored!超出最大数量 1 个，超出的 1 个文件将被忽略！',
+        overSizeErr: 'The size of the file is not more than {0}}!',
+        reUpload: 'Re upload',
+        uploadProgress: 'Uploading {0}%',
+        uploadErr: 'Fail to upload',
+        uploadSuccess: 'Successfully upload',
+        moreBtnText: 'More ({0})',
+        viewItemTitle: 'click to view'
+      },
       formDesign: {
+        formName: 'Form name',
+        defFormTitle: 'Unnamed form',
+        widgetPropTab: 'Field property',
+        widgetFormTab: 'Form property',
+        error: {
+          wdFormUni: '该类型的控件在表单中只允许添加一个',
+          wdSubUni: '该类型的控件在子表中只允许添加一个'
+        },
+        styleSetting: {
+          btn: 'Style setting',
+          title: 'Form style setting',
+          layoutTitle: 'Field layout',
+          verticalLayout: 'Vertical layout',
+          horizontalLayout: 'Horizontal layout',
+          styleTitle: 'Title style',
+          boldTitle: 'Bold title',
+          fontBold: 'Bold',
+          fontNormal: 'Normal',
+          colonTitle: 'Display colon',
+          colonVisible: 'Visible',
+          colonHidden: 'Hidden',
+          alignTitle: 'Title align',
+          widthTitle: 'Title width',
+          alignLeft: 'Left',
+          alignRight: 'Right',
+          unitPx: 'Px',
+          unitPct: 'Pct'
+        },
         widget: {
-          input: 'Input',
-          textarea: 'Textarea',
-          select: 'Select'
+          group: {
+            base: 'Base control',
+            layout: 'Layout control',
+            system: 'System control',
+            module: 'Module control',
+            chart: 'Chart control',
+            advanced: 'Advanced control'
+          },
+          copyTitle: 'Copy_{0}',
+          component: {
+            input: 'Input',
+            textarea: 'Textarea',
+            select: 'Select',
+            row: 'Row/column',
+            title: 'Title',
+            text: 'Text',
+            subtable: 'Subtable',
+            VxeSwitch: 'Yes/no',
+            VxeInput: 'Input',
+            VxeNumberInput: 'Number',
+            VxeDatePicker: 'Date',
+            VxeTextarea: 'Textarea',
+            VxeSelect: 'Select',
+            VxeTreeSelect: 'Tree select',
+            VxeRadioGroup: 'Radio',
+            VxeCheckboxGroup: 'Checkbox',
+            VxeUploadFile: 'File',
+            VxeUploadImage: 'Image'
+          }
+        },
+        widgetProp: {
+          name: 'Field name',
+          placeholder: 'Field placeholder',
+          required: 'Required',
+          multiple: 'Allow to select multiple',
+          displaySetting: {
+            name: 'Display setting',
+            pc: 'PC',
+            mobile: 'Mobile',
+            visible: 'Visible',
+            hidden: 'Hidden'
+          },
+          dataSource: {
+            name: 'Data source',
+            defValue: 'Option {0}',
+            addOption: 'Add option',
+            batchEditOption: 'Batch edit',
+            batchEditTip: 'Each row corresponds to an option, supporting direct copying and pasting from tables, Excel, and WPS.',
+            batchEditSubTip: 'Each row corresponds to an option. If grouped, the sub items can start with spaces or tab keys, and can be directly copied and pasted from tables, Excel, or WPS.',
+            buildOption: 'Build option'
+          },
+          rowProp: {
+            colSize: 'Number of columns',
+            col2: 'Two columns',
+            col3: 'Three columns',
+            col4: 'Four columns',
+            col6: 'Six columns',
+            layout: 'Layout'
+          },
+          textProp: {
+            name: 'Content',
+            alignTitle: 'Align',
+            alignLeft: 'Left',
+            alignCenter: 'Center',
+            alignRight: 'Right',
+            colorTitle: 'Color',
+            sizeTitle: 'Font size',
+            boldTitle: 'Font bold',
+            fontNormal: 'Normal',
+            fontBold: 'Bold'
+          },
+          subtableProp: {
+            seqTitle: 'S/N',
+            showSeq: 'Display serial number',
+            showCheckbox: 'Allow multiple selections',
+            errSubDrag: 'The sub table does not support this control. Please use another control.',
+            colPlace: 'Drag the control in.'
+          },
+          uploadProp: {
+            limitFileCount: 'File quantity limitation',
+            limitFileSize: 'File size limitation',
+            multiFile: 'Allows multiple files',
+            limitImgCount: 'Image quantity limitation',
+            limitImgSize: 'Image size limitation',
+            multiImg: 'Allows multiple images'
+          }
+        }
+      },
+      listDesign: {
+        fieldSettingTab: 'Field',
+        listSettingTab: 'Parameter',
+        searchTitle: 'Search',
+        listTitle: 'List',
+        searchField: 'Search field',
+        listField: 'List field',
+        activeBtn: {
+          ActionButtonUpdate: 'Edit',
+          ActionButtonDelete: 'Delete'
+        },
+        search: {
+          addBtn: 'Edit',
+          emptyText: 'No filter condition is configured.',
+          editPopupTitle: 'Edit search fields'
+        },
+        searchPopup: {
+          colTitle: 'Title',
+          saveBtn: 'Save'
+        }
+      },
+      text: {
+        copySuccess: 'Successfully copied to clipboard.',
+        copyError: 'The current environment does not support this operation.'
+      },
+      countdown: {
+        formats: {
+          yyyy: 'Year',
+          MM: 'Moon',
+          dd: 'Day',
+          HH: 'Hour',
+          mm: 'Minute',
+          ss: 'Second'
         }
       },
       /**

package/lib/locale/lang/ja-JP.js

@@ -7,22 +7,26 @@ exports.default = void 0;
 var _default = exports.default = {
   vxe: {
     base: {
-      pleaseInput: 'Please input',
-      pleaseSelect: 'Select'
+      pleaseInput: '入力してください',
+      pleaseSelect: '選択してください',
+      comma: ',',
+      fullStop: '.'
     },
     loading: {
       text: 'Loading...'
     },
     error: {
-      groupFixed: 'グループ化ヘッダーを使用する場合、固定列はグループで設定しなければなりません',
-      groupMouseRange: 'グループ化ヘッダーと「{0}」は同時に使用できません。これによりエラーが発生する可能性があります',
-      groupTag: 'グループ化ヘッダーは "{0}" を使ってください。 "{1}" はエラーが発生する可能性があります',
+      downErr: '下载失败',
+      groupFixed: 'ヘッダー結合を使用する場合、固定列はグループで設定しなければなりません',
+      groupMouseRange: 'ヘッダー結合と「{0}」は同時に使用できません。これによりエラーが発生する可能性があります',
+      groupTag: 'ヘッダー結合は "{0}" を使ってください。 "{1}" はエラーが発生する可能性があります',
       scrollErrProp: '仮想スクロールはこのパラメータを使えません： "{0}"',
       errConflicts: 'パラメータ "{0}" と "{1}" は同時に使えません',
       unableInsert: '指定された位置に挿入できない',
       useErr: '"{0}" モジュールをインストールする際にエラーが発生し、順序が正しくない可能性がある。依存するモジュールはTableの前にインストールする必要がある',
       barUnableLink: 'ツールバーはフォームを関連付けることができない',
       expandContent: '拡張行スロットは "content" である必要があります。確認してください',
+      reqComp: 'Require "{0}" component, check whether the install is correct. https://vxeui.com/#/start/useGlobal',
       reqModule: '"{0}" モジュールが必要です',
       reqProp: '必要な "{0}" パラメーターが欠落しているため、エラーが発生する可能性があります',
       emptyProp: '"{0}" プロパティは空白が許可されていません',
@@ -38,6 +42,7 @@ var _default = exports.default = {
       notProp: 'サポートされていないパラメータ "{0}"',
       checkProp: 'パフマンス低下になる可能性があります。パラメータ "{0}" の値を指定してください',
       coverProp: 'The parameter "{1}" to "{0}" is repeatedly defined. This may cause an error',
+      uniField: '字段名 "{0}" 重复定义，这可能会出现错误',
       delFunc: '"{0}" functionが非推奨です。"{1}"を使用してください',
       delProp: '"{0}" propertyが非推奨です。"{1}"を使用してください',
       delEvent: 'イベント "{0}" が廃止されました。 "{1}" を使用してください',
@@ -51,7 +56,8 @@ var _default = exports.default = {
     table: {
       emptyText: 'データがありません',
       allTitle: '全て選択/取消',
-      seqTitle: 'S/N',
+      seqTitle: 'N/S',
+      actionTitle: 'Action',
       confirmFilter: 'OK',
       resetFilter: 'リセット',
       allFilter: '全て',
@@ -66,12 +72,13 @@ var _default = exports.default = {
       customTitle: '列設定',
       customAll: '全部',
       customConfirm: 'OK',
+      customClose: '关闭',
       customCancel: 'Cancel',
-      customRestore: 'Restore default',
+      customRestore: 'リセット',
       maxFixedCol: '最大固定列数が {0} です。'
     },
     grid: {
-      selectOneRecord: '1つ以上ののレコードを選択してください',
+      selectOneRecord: '1つ以上のレコードを選択してください',
       deleteSelectRecord: 'レコードを削除してもよろしいですか？',
       removeSelectRecord: 'レコードを削除してもよろしいですか？',
       dataUnchanged: 'データが変更されませんでした',
@@ -104,7 +111,7 @@ var _default = exports.default = {
       endPageTitle: '最後ページ'
     },
     alert: {
-      title: 'System messages'
+      title: '確認'
     },
     button: {
       confirm: 'OK',
@@ -122,12 +129,12 @@ var _default = exports.default = {
       cstmDragTarget: '移動ターゲット: {0}',
       setting: {
         colSort: 'ソート',
-        sortHelpTip: 'Click and drag the icon to adjust the order of the columns.',
+        sortHelpTip: 'ドラッグして列を並べ替えます',
         colTitle: 'タイトル',
-        colResizable: 'Column width (px)',
-        colVisible: '表示',
-        colFixed: '冻结列',
-        colFixedMax: '冻结列（最多 {0} 列）',
+        colResizable: '列の幅 (px)',
+        colVisible: '表示する',
+        colFixed: '列固定',
+        colFixedMax: '列固定（最大 {0} 列）',
         fixedLeft: '左側',
         fixedUnset: '指定しない',
         fixedRight: '右側'
@@ -135,17 +142,17 @@ var _default = exports.default = {
     },
     import: {
       modes: {
-        covering: 'Overwrite mode (directly overwrite table data)',
-        insert: 'Bottom append (appends new data to the bottom of the table)',
-        insertTop: 'Top append (appends new data to the top of the table)',
-        insertBottom: 'Bottom append (appends new data to the bottom of the table)'
+        covering: '上書きモード',
+        insert: '追加モード（最後行に追加）',
+        insertTop: '追加モード（先頭行に追加）',
+        insertBottom: '追加モード（最後行に追加）'
       },
       impTitle: 'データインポート',
       impFile: 'ファイル名',
       impSelect: 'ファイル選択',
       impType: 'ファイルの種類',
       impOpts: 'パラメータ指定',
-      impMode: 'Import mode',
+      impMode: 'インポートモード',
       impConfirm: 'インポート',
       impCancel: 'キャンセル'
     },
@@ -194,8 +201,14 @@ var _default = exports.default = {
       expCancel: 'キャンセル'
     },
     modal: {
+      errTitle: 'エラー',
+      zoomMin: '最小化',
       zoomIn: '最大化',
       zoomOut: '縮小',
+      close: '閉じる',
+      miniMaxSize: 'The number of minimized Windows cannot exceed {0}.'
+    },
+    drawer: {
       close: '閉じる'
     },
     form: {
@@ -275,11 +288,189 @@ var _default = exports.default = {
         }
       }
     },
+    imagePreview: {
+      popupTitle: 'Preview',
+      operBtn: {
+        zoomOut: 'Reduce',
+        zoomIn: 'Enlarge',
+        pctFull: 'Proportional scaling',
+        pct11: 'Show original size',
+        rotateLeft: 'Rotate left',
+        rotateRight: 'Rotate right',
+        print: 'Click to print',
+        download: 'Click to download'
+      }
+    },
+    upload: {
+      fileBtnText: 'Click or drag',
+      imgBtnText: 'Click or drag',
+      dragPlaceholder: 'Please drag and drop the file into this area to upload it.',
+      imgSizeHint: 'Single {0}',
+      imgCountHint: 'Up to {0}',
+      fileTypeHint: 'Support {0} file types',
+      fileSizeHint: 'Single file size does not exceed {0}',
+      fileCountHint: 'Up to {0} file can be uploaded',
+      overCountErr: 'You can only choose {0} file!',
+      overCountExtraErr: 'It has exceeded the maximum number {0}, and more than {0} file will be ignored!超出最大数量 1 个，超出的 1 个文件将被忽略！',
+      overSizeErr: 'The size of the file is not more than {0}}!',
+      reUpload: 'Re upload',
+      uploadProgress: 'Uploading {0}%',
+      uploadErr: 'Fail to upload',
+      uploadSuccess: 'Successfully upload',
+      moreBtnText: 'More ({0})',
+      viewItemTitle: 'click to view'
+    },
     formDesign: {
+      formName: 'Form name',
+      defFormTitle: 'Unnamed form',
+      widgetPropTab: 'Field property',
+      widgetFormTab: 'Form property',
+      error: {
+        wdFormUni: '该类型的控件在表单中只允许添加一个',
+        wdSubUni: '该类型的控件在子表中只允许添加一个'
+      },
+      styleSetting: {
+        btn: 'Style setting',
+        title: 'Form style setting',
+        layoutTitle: 'Field layout',
+        verticalLayout: 'Vertical layout',
+        horizontalLayout: 'Horizontal layout',
+        styleTitle: 'Title style',
+        boldTitle: 'Bold title',
+        fontBold: 'Bold',
+        fontNormal: 'Normal',
+        colonTitle: 'Display colon',
+        colonVisible: 'Visible',
+        colonHidden: 'Hidden',
+        alignTitle: 'Title align',
+        widthTitle: 'Title width',
+        alignLeft: 'Left',
+        alignRight: 'Right',
+        unitPx: 'Px',
+        unitPct: 'Pct'
+      },
       widget: {
-        input: 'Input',
-        textarea: 'Textarea',
-        select: 'Select'
+        group: {
+          base: 'Base control',
+          layout: 'Layout control',
+          system: 'System control',
+          module: 'Module control',
+          chart: 'Chart control',
+          advanced: 'Advanced control'
+        },
+        copyTitle: 'Copy_{0}',
+        component: {
+          input: 'Input',
+          textarea: 'Textarea',
+          select: 'Select',
+          row: 'Row/column',
+          title: 'Title',
+          text: 'Text',
+          subtable: 'Subtable',
+          VxeSwitch: 'Yes/no',
+          VxeInput: 'Input',
+          VxeNumberInput: 'Number',
+          VxeDatePicker: 'Date',
+          VxeTextarea: 'Textarea',
+          VxeSelect: 'Select',
+          VxeTreeSelect: 'Tree select',
+          VxeRadioGroup: 'Radio',
+          VxeCheckboxGroup: 'Checkbox',
+          VxeUploadFile: 'File',
+          VxeUploadImage: 'Image'
+        }
+      },
+      widgetProp: {
+        name: 'Field name',
+        placeholder: 'Field placeholder',
+        required: 'Required',
+        multiple: 'Allow to select multiple',
+        displaySetting: {
+          name: 'Display setting',
+          pc: 'PC',
+          mobile: 'Mobile',
+          visible: 'Visible',
+          hidden: 'Hidden'
+        },
+        dataSource: {
+          name: 'Data source',
+          defValue: 'Option {0}',
+          addOption: 'Add option',
+          batchEditOption: 'Batch edit',
+          batchEditTip: 'Each row corresponds to an option, supporting direct copying and pasting from tables, Excel, and WPS.',
+          batchEditSubTip: 'Each row corresponds to an option. If grouped, the sub items can start with spaces or tab keys, and can be directly copied and pasted from tables, Excel, or WPS.',
+          buildOption: 'Build option'
+        },
+        rowProp: {
+          colSize: 'Number of columns',
+          col2: 'Two columns',
+          col3: 'Three columns',
+          col4: 'Four columns',
+          col6: 'Six columns',
+          layout: 'Layout'
+        },
+        textProp: {
+          name: 'Content',
+          alignTitle: 'Align',
+          alignLeft: 'Left',
+          alignCenter: 'Center',
+          alignRight: 'Right',
+          colorTitle: 'Color',
+          sizeTitle: 'Font size',
+          boldTitle: 'Font bold',
+          fontNormal: 'Normal',
+          fontBold: 'Bold'
+        },
+        subtableProp: {
+          seqTitle: 'S/N',
+          showSeq: 'Display serial number',
+          showCheckbox: 'Allow multiple selections',
+          errSubDrag: 'The sub table does not support this control. Please use another control.',
+          colPlace: '将控件拖拽进来'
+        },
+        uploadProp: {
+          limitFileCount: 'File quantity limitation',
+          limitFileSize: 'File size limitation',
+          multiFile: 'Allows multiple files',
+          limitImgCount: 'Image quantity limitation',
+          limitImgSize: 'Image size limitation',
+          multiImg: 'Allows multiple images'
+        }
+      }
+    },
+    listDesign: {
+      fieldSettingTab: 'Field',
+      listSettingTab: 'Parameter',
+      searchTitle: 'Search',
+      listTitle: 'List',
+      searchField: 'Search field',
+      listField: 'List field',
+      activeBtn: {
+        ActionButtonUpdate: 'Edit',
+        ActionButtonDelete: 'Delete'
+      },
+      search: {
+        addBtn: 'Edit',
+        emptyText: 'No filter condition is configured.',
+        editPopupTitle: '编辑查询字段'
+      },
+      searchPopup: {
+        colTitle: '标题',
+        saveBtn: '保存'
+      }
+    },
+    text: {
+      copySuccess: 'Successfully copied to clipboard.',
+      copyError: 'The current environment does not support this operation.'
+    },
+    countdown: {
+      formats: {
+        yyyy: '年',
+        MM: '月',
+        dd: '天',
+        HH: '时',
+        mm: '分',
+        ss: '秒'
       }
     },
     /**