vxe-table 3.15.52 → 3.16.0-beta.1

package/packages/locale/lang/ar-EG.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'التوجيه العالمي "{0}" غير موجود',
       notSlot: 'الفتحة "{0}" غير موجودة',
       noTree: '"{0}" غير مدعوم في بنية الشجرة',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'المعلمة غير المدعومة "{0}"',
       checkProp: 'عندما يكون حجم البيانات كبيرًا جدًا ، قد يتم تعثر خانة الاختيار. يوصى بتعيين المعلمة "{0}" لتحسين سرعة التقديم',
       coverProp: 'يتم تعريف المعلمة "{1}" من "{0}" مرارًا وتكرارًا ، والتي قد تسبب خطأً',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'واضح',
       confirm: 'يتأكد',
-      copySuccess: 'نسخ إلى الحافظة: {0}',
-      hex: 'HEX'
+      copySuccess: 'نسخ إلى الحافظة: {0}'
     },
     formDesign: {
       formName: 'اسم النموذج',

package/packages/locale/lang/de-DE.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Die globale Richtlinie "{0}" existiert nicht',
       notSlot: 'Slot "{0}" existiert nicht',
       noTree: '"{0}" wird in der Baumstruktur nicht unterstützt',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Nicht unterstützter Parameter "{0}"',
       checkProp: 'Wenn das Datenvolumen zu groß ist, kann das Kontrollkästchen stottern. Es wird empfohlen, den Parameter "{0}" festzulegen, um die Rendering -Geschwindigkeit zu verbessern',
       coverProp: 'Der Parameter "{1}" von "{0}" wird wiederholt definiert, was einen Fehler verursachen kann',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Klar',
       confirm: 'bestätigen',
-      copySuccess: 'Kopieren Sie in Zwischenablage: {0}',
-      hex: 'HEX'
+      copySuccess: 'Kopieren Sie in Zwischenablage: {0}'
     },
     formDesign: {
       formName: 'Formname',

package/packages/locale/lang/en-US.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'The global directive "{0}" does not exist',
       notSlot: 'Slot "{0}" does not exist',
       noTree: '"{0}" is not supported in the tree structure',
-      noGroup: '"{0}" is not supported in the aggregation grouping',
       notProp: 'Unsupported parameter "{0}"',
       checkProp: 'When the data volume is too large, the check box may be stuttered. It is recommended to set the parameter "{0}" to improve rendering speed',
       coverProp: 'The parameter "{1}" of "{0}" is repeatedly defined, which may cause an error',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Clear',
       confirm: 'confirm',
-      copySuccess: 'Copyed to clipboard: {0}',
-      hex: 'HEX'
+      copySuccess: 'Copyed to clipboard: {0}'
     },
     formDesign: {
       formName: 'Form name',

package/packages/locale/lang/es-ES.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'La directiva global "{0}" no existe',
       notSlot: 'La ranura "{0}" no existe',
       noTree: '"{0}" no es compatible con la estructura del árbol',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Parámetro no compatible "{0}"',
       checkProp: 'Cuando el volumen de datos es demasiado grande, la casilla de verificación puede tartamudear. Se recomienda establecer el parámetro "{0}" para mejorar la velocidad de renderización',
       coverProp: 'El parámetro "{1}" de "{0}" se define repetidamente, lo que puede causar un error',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Claro',
       confirm: 'confirmar',
-      copySuccess: 'Copiado al portapapeles: {0}',
-      hex: 'HEX'
+      copySuccess: 'Copiado al portapapeles: {0}'
     },
     formDesign: {
       formName: 'Nombre del formulario',

package/packages/locale/lang/fr-FR.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: "La directive globale \"{0}\" n'existe pas",
       notSlot: "Slot \"{0}\" n'existe pas",
       noTree: "\"{0}\" n'est pas pris en charge dans la structure de l'arbre",
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Paramètre non pris en charge "{0}"',
       checkProp: 'Lorsque le volume de données est trop grand, la case peut être bégayée. Il est recommandé de définir le paramètre "{0}" pour améliorer la vitesse de rendu',
       coverProp: 'Le paramètre "{1}" de "{0}" est défini à plusieurs reprises, ce qui peut provoquer une erreur',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Clair',
       confirm: 'confirmer',
-      copySuccess: 'Copie dans le presse-papiers: {0}',
-      hex: 'HEX'
+      copySuccess: 'Copie dans le presse-papiers: {0}'
     },
     formDesign: {
       formName: 'Nom de formulaire',

package/packages/locale/lang/hu-HU.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'A "{0}" globális irányelv nem létezik',
       notSlot: 'A "{0}" rés nem létezik',
       noTree: 'A "{0}" nem támogatott a faszerkezetben',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Nem támogatott paraméter "{0}"',
       checkProp: 'Ha az adatmennyiség túl nagy, akkor a jelölőnégyzet dadoghat. Javasoljuk, hogy állítsa be a "{0}" paramétert a megjelenítési sebesség javítása érdekében',
       coverProp: 'A "{1}" paramétert a "{0}" paramétere többször meghatározza, ami hibát okozhat',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Világos',
       confirm: 'megerősít',
-      copySuccess: 'Másolva a vágólapra: {0}',
-      hex: 'HEX'
+      copySuccess: 'Másolva a vágólapra: {0}'
     },
     formDesign: {
       formName: 'Forma neve',

package/packages/locale/lang/hy-AM.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: '全局指令 "{0}" 不存在',
       notSlot: '插槽 "{0}" 不存在',
       noTree: '树结构不支持 "{0}"',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: '不支持的参数 "{0}"',
       checkProp: '当数据量过大时可能会导致复选框卡顿，建议设置参数 "{0}" 提升渲染速度',
       coverProp: '"{0}" 的参数 "{1}" 重复定义，这可能会出现错误',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: '清除',
       confirm: '确认',
-      copySuccess: '已复制到剪贴板：{0}',
-      hex: 'HEX'
+      copySuccess: '已复制到剪贴板：{0}'
     },
     formDesign: {
       formName: '表单名称',

package/packages/locale/lang/id-ID.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Petunjuk global "{0}" tidak ada',
       notSlot: 'Slot "{0}" tidak ada',
       noTree: '"{0}" tidak didukung dalam struktur pohon',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Parameter yang tidak didukung "{0}"',
       checkProp: 'Ketika volume data terlalu besar, kotak centang mungkin tergagap. Disarankan untuk mengatur parameter "{0}" untuk meningkatkan kecepatan rendering',
       coverProp: 'Parameter "{1}" dari "{0}" berulang kali didefinisikan, yang dapat menyebabkan kesalahan',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Jernih',
       confirm: 'mengonfirmasi',
-      copySuccess: 'Disalin ke clipboard: {0}',
-      hex: 'HEX'
+      copySuccess: 'Disalin ke clipboard: {0}'
     },
     formDesign: {
       formName: 'Nama bentuk',

package/packages/locale/lang/it-IT.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'La direttiva globale "{0}" non esiste',
       notSlot: 'Lo slot "{0}" non esiste',
       noTree: "\"{0}\" non è supportato nella struttura dell'albero",
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Parametro non supportato "{0}"',
       checkProp: 'Quando il volume dei dati è troppo grande, la casella di controllo può essere balbettata. Si consiglia di impostare il parametro "{0}" per migliorare la velocità di rendering',
       coverProp: 'Il parametro "{1}" di "{0}" è ripetutamente definito, che può causare un errore',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Chiaro',
       confirm: 'confermare',
-      copySuccess: 'Copiato sugli appunti: {0}',
-      hex: 'HEX'
+      copySuccess: 'Copiato sugli appunti: {0}'
     },
     formDesign: {
       formName: 'Nome del modulo',

package/packages/locale/lang/ja-JP.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'グローバル指令「{0}」は存在しません',
       notSlot: 'スロット「{0}」は存在しません',
       noTree: '「{0}」はツリー構造ではサポートされていません',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'サポートされていないパラメーター "{0}"',
       checkProp: 'データのボリュームが大きすぎると、チェックボックスがutter音を立てる可能性があります。レンダリング速度を改善するためにパラメーター「{0}」を設定することをお勧めします',
       coverProp: '「{0}」のパラメーター「{1}」が繰り返し定義されているため、エラーが発生する可能性があります',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'クリア',
       confirm: '確認する',
-      copySuccess: 'クリップボードにコピー：{0}',
-      hex: 'HEX'
+      copySuccess: 'クリップボードにコピー：{0}'
     },
     formDesign: {
       formName: 'フォーム名',

package/packages/locale/lang/ko-KR.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: '글로벌 지시문 "{0}"은 존재하지 않습니다',
       notSlot: '슬롯 "{0}"은 존재하지 않습니다',
       noTree: '"{0}"은 트리 구조에서 지원되지 않습니다',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: '지원되지 않는 매개 변수 "{0}"',
       checkProp: '데이터 볼륨이 너무 커지면 확인란이 말더듬 될 수 있습니다. 렌더링 속도를 향상시키기 위해 매개 변수 "{0}"를 설정하는 것이 좋습니다.',
       coverProp: '"{0}"의 매개 변수 "{1}"이 반복적으로 정의되어 오류가 발생할 수 있습니다.',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: '분명한',
       confirm: '확인하다',
-      copySuccess: '클립 보드로 복사 : {0}',
-      hex: 'HEX'
+      copySuccess: '클립 보드로 복사 : {0}'
     },
     formDesign: {
       formName: '양식 이름',

package/packages/locale/lang/ms-MY.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Arahan global "{0}" tidak wujud',
       notSlot: 'Slot "{0}" tidak wujud',
       noTree: '"{0}" tidak disokong dalam struktur pokok',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Parameter yang tidak disokong "{0}"',
       checkProp: 'Apabila jumlah data terlalu besar, kotak semak boleh digagalkan. Adalah disyorkan untuk menetapkan parameter "{0}" untuk meningkatkan kelajuan rendering',
       coverProp: 'Parameter "{1}" dari "{0}" ditakrifkan berulang kali, yang boleh menyebabkan ralat',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Jelas',
       confirm: 'mengesahkan',
-      copySuccess: 'Disalin ke papan klip: {0}',
-      hex: 'HEX'
+      copySuccess: 'Disalin ke papan klip: {0}'
     },
     formDesign: {
       formName: 'Nama Bentuk',

package/packages/locale/lang/nb-NO.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Det globale direktivet "{0}" eksisterer ikke',
       notSlot: 'Slot "{0}" eksisterer ikke',
       noTree: '"{0}" støttes ikke i trestrukturen',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Ikke støttet parameter "{0}"',
       checkProp: 'Når datavolumet er for stort, kan avmerkingsboksen være stammet. Det anbefales å angi parameteren "{0}" for å forbedre gjengivelseshastigheten',
       coverProp: 'Parameteren "{1}" av "{0}" er gjentatte ganger definert, noe som kan forårsake en feil',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Klar',
       confirm: 'bekrefte',
-      copySuccess: 'Kopiert til utklippstavlen: {0}',
-      hex: 'HEX'
+      copySuccess: 'Kopiert til utklippstavlen: {0}'
     },
     formDesign: {
       formName: 'Formnavn',

package/packages/locale/lang/pt-BR.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'A diretiva global "{0}" não existe',
       notSlot: 'Slot "{0}" não existe',
       noTree: '"{0}" não é suportado na estrutura da árvore',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Parâmetro não suportado "{0}"',
       checkProp: 'Quando o volume de dados é muito grande, a caixa de seleção pode ser gaguejada. Recomenda -se definir o parâmetro "{0}" para melhorar a velocidade de renderização',
       coverProp: 'O parâmetro "{1}" de "{0}" é definido repetidamente, o que pode causar um erro',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Claro',
       confirm: 'confirmar',
-      copySuccess: 'Copiado para a área de transferência: {0}',
-      hex: 'HEX'
+      copySuccess: 'Copiado para a área de transferência: {0}'
     },
     formDesign: {
       formName: 'Nome do formulário',

package/packages/locale/lang/ru-RU.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Глобальная директива "{0}" не существует',
       notSlot: 'Слот "{0}" не существует',
       noTree: '"{0}" не поддерживается в структуре дерева',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Неподдерживаемый параметр "{0}"',
       checkProp: 'Когда объем данных слишком большой, флажок может быть заикается. Рекомендуется установить параметр «{0}» для улучшения скорости рендеринга',
       coverProp: 'Параметр «{1}» из «{0}» неоднократно определяется, что может вызвать ошибку',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Прозрачный',
       confirm: 'подтверждать',
-      copySuccess: 'Копировано в буфер обмена: {0}',
-      hex: 'HEX'
+      copySuccess: 'Копировано в буфер обмена: {0}'
     },
     formDesign: {
       formName: 'Название формы',

package/packages/locale/lang/th-TH.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'คำสั่งทั่วโลก "{0}" ไม่มีอยู่จริง',
       notSlot: 'สล็อต "{0}" ไม่มีอยู่จริง',
       noTree: '"{0}" ไม่รองรับในโครงสร้างต้นไม้',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'พารามิเตอร์ที่ไม่ได้รับการสนับสนุน "{0}"',
       checkProp: 'เมื่อปริมาณข้อมูลมีขนาดใหญ่เกินไปช่องทำเครื่องหมายอาจถูกพูดติดอ่าง ขอแนะนำให้ตั้งค่าพารามิเตอร์ "{0}" เพื่อปรับปรุงความเร็วในการแสดงผล',
       coverProp: 'พารามิเตอร์ "{1}" ของ "{0}" ถูกกำหนดซ้ำ ๆ ซึ่งอาจทำให้เกิดข้อผิดพลาด',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'ชัดเจน',
       confirm: 'ยืนยัน',
-      copySuccess: 'คัดลอกไปยังคลิปบอร์ด: {0}',
-      hex: 'HEX'
+      copySuccess: 'คัดลอกไปยังคลิปบอร์ด: {0}'
     },
     formDesign: {
       formName: 'ชื่อแบบฟอร์ม',

package/packages/locale/lang/ug-CN.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'ئومومىيۈزلۈك بۇيرۇق "{0}" مەۋجۇت ئەمەس',
       notSlot: 'قىستۇرما "{0}" مەۋجۇت ئەمەس',
       noTree: 'دەرەخ شەكىللىك  قوللىمايدىغان قۇرۇلما "{0}"',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'قوللىمايدىغان پارامېتىر "{0}"',
       checkProp: 'ئۇچۇر مىقدارى كۆپ بوپ كەتكەندە بەلكىم تاللاش كۇنۇپكىسى قىتىۋىلىشى مومكىن ،تەۋسىيەلىك تەكشەشكە تېگىشلىك پارامېتىر "{0}" بەت قۇرۇلمىسىنى ئەلالاشتۇرىدۇ',
       coverProp: '"{0}" نىڭ پارامېتىرى "{1}" قايتىلانما قىممەت بىرىلدى، بەلكىم خاتالىق كەلتۈرۈپ چىقىرىشى مومكىن',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: '清除',
       confirm: '确认',
-      copySuccess: '已复制到剪贴板：{0}',
-      hex: 'HEX'
+      copySuccess: '已复制到剪贴板：{0}'
     },
     formDesign: {
       formName: 'جەدۋەل ئىسمى',

package/packages/locale/lang/uk-UA.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Глобальної директиви "{0}" не існує',
       notSlot: 'Слот "{0}" не існує',
       noTree: '"{0}" не підтримується в структурі дерева',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Непідтримуваний параметр "{0}"',
       checkProp: "Коли об'єм даних занадто великий, прапорець може бути заїканий. Рекомендується встановити параметр \"{0}\" для покращення швидкості візуалізації",
       coverProp: 'Параметр "{1}" "{0}" неодноразово визначається, що може спричинити помилку',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Чіткий',
       confirm: 'підтверджувати',
-      copySuccess: 'Копіюється в буфер обміну: {0}',
-      hex: 'HEX'
+      copySuccess: 'Копіюється в буфер обміну: {0}'
     },
     formDesign: {
       formName: 'Назва',

package/packages/locale/lang/uz-UZ.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: "\"{0}\" global ko'rsatmasi mavjud emas",
       notSlot: '"{0}" uyasi mavjud emas',
       noTree: "\"{0}\" daraxt tuzilmasida qo'llab-quvvatlanmaydi",
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: "\"{0}\" ni qo'llab-quvvatlamagan parametr",
       checkProp: "Ma'lumotlar balandligi juda katta bo'lsa, katagiga ko'tarilishi mumkin. Tezlikni yaxshilash uchun \"{0}\" parametrini belgilash tavsiya etiladi",
       coverProp: '"{1}" parametr "{0}" parametr bir necha bor aniqlanadi, bu xatoga olib kelishi mumkin',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Aniq',
       confirm: 'tasdiqlamoq',
-      copySuccess: "Clipboardga nusxa ko'chirish: {0}",
-      hex: 'HEX'
+      copySuccess: "Clipboardga nusxa ko'chirish: {0}"
     },
     formDesign: {
       formName: 'Forma nomi',

package/packages/locale/lang/vi-VN.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: 'Chỉ thị toàn cầu "{0}" không tồn tại',
       notSlot: 'Khe "{0}" không tồn tại',
       noTree: '"{0}" không được hỗ trợ trong cấu trúc cây',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: 'Tham số không được hỗ trợ "{0}"',
       checkProp: 'Khi khối lượng dữ liệu quá lớn, hộp kiểm có thể được lắp. Bạn nên đặt tham số "{0}" để cải thiện tốc độ kết xuất',
       coverProp: 'Tham số "{1}" của "{0}" được xác định nhiều lần, có thể gây ra lỗi',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: 'Thông thoáng',
       confirm: 'xác nhận',
-      copySuccess: 'Được sao chép vào bảng tạm: {0}',
-      hex: 'HEX'
+      copySuccess: 'Được sao chép vào bảng tạm: {0}'
     },
     formDesign: {
       formName: 'Tên hình thức',

package/packages/locale/lang/zh-CHT.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: '全局指令 "{0}" 不存在',
       notSlot: '插槽 "{0}" 不存在',
       noTree: '樹結構不支持 "{0}"',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: '不支持的參數 "{0}"',
       checkProp: '當數據量過大時可能會導致複選框卡頓，建議設置參數 "{0}" 提升渲染速度',
       coverProp: '"{0}" 的參數 "{1}" 重複定義，這可能會出現錯誤',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: '清除',
       confirm: '確認',
-      copySuccess: '已復製到剪貼板：{0}',
-      hex: '十六进制'
+      copySuccess: '已復製到剪貼板：{0}'
     },
     formDesign: {
       formName: '表單名稱',

package/packages/locale/lang/zh-CN.ts

@@ -36,7 +36,6 @@ export default {
       notCommands: '全局指令 "{0}" 不存在',
       notSlot: '插槽 "{0}" 不存在',
       noTree: '树结构不支持 "{0}"',
-      noGroup: '数据分组后不支持 "{0}"',
       notProp: '不支持的参数 "{0}"',
       checkProp: '当数据量过大时可能会导致复选框卡顿，建议设置参数 "{0}" 提升渲染速度',
       coverProp: '"{0}" 的参数 "{1}" 重复定义，这可能会出现错误',
@@ -355,8 +354,7 @@ export default {
     colorPicker: {
       clear: '清除',
       confirm: '确认',
-      copySuccess: '已复制到剪贴板：{0}',
-      hex: '十六进制'
+      copySuccess: '已复制到剪贴板：{0}'
     },
     formDesign: {
       formName: '表单名称',

package/packages/table/module/edit/mixin.ts

@@ -96,17 +96,12 @@ function insertTreeRow ($xeTable: VxeTableConstructor & VxeTablePrivateMethods,
   })
 }
 
-// function insertGroupRow ($xeTable: VxeTableConstructor & VxeTablePrivateMethods, newRecords: any[], isAppend: boolean) {
-
-// }
-
 function handleInsertRowAt ($xeTable: VxeTableConstructor & VxeTablePrivateMethods, records: any[], targetRow: any, isInsertNextRow?: any) {
   const props = $xeTable
   const reactData = $xeTable as unknown as TableReactData
   const internalData = $xeTable as unknown as TableInternalData
 
   const { treeConfig } = props
-  const { isRowGroupStatus } = reactData
   const { tableFullTreeData, afterFullData, mergeBodyList, tableFullData, fullDataRowIdData, fullAllDataRowIdData, insertRowMaps } = internalData
   const treeOpts = $xeTable.computeTreeOpts
   const { transform, rowField, mapChildrenField } = treeOpts
@@ -116,16 +111,9 @@ function handleInsertRowAt ($xeTable: VxeTableConstructor & VxeTablePrivateMetho
   }
   const newRecords: any[] = $xeTable.defineField(records.map(record => Object.assign(treeConfig && transform ? { [mapChildrenField]: [], [childrenField]: [] } : {}, record)))
   if (XEUtils.eqNull(targetRow)) {
-    // 如果为虚拟树
+  // 如果为虚拟树
     if (treeConfig && transform) {
       insertTreeRow($xeTable, newRecords, false)
-    } else if (isRowGroupStatus) {
-      // 如果分组
-      if (treeConfig) {
-        throw new Error(getI18n('vxe.error.noTree', ['insert']))
-      }
-      warnLog(getI18n('vxe.error.noGroup', ['remove']))
-      // insertGroupRow($xeTable, newRecords, false)
     } else {
       newRecords.forEach(item => {
         const rowid = getRowid($xeTable, item)
@@ -148,13 +136,6 @@ function handleInsertRowAt ($xeTable: VxeTableConstructor & VxeTablePrivateMetho
       // 如果为虚拟树
       if (treeConfig && transform) {
         insertTreeRow($xeTable, newRecords, true)
-      } else if (isRowGroupStatus) {
-      // 如果分组
-        if (treeConfig) {
-          throw new Error(getI18n('vxe.error.noTree', ['insert']))
-        }
-        warnLog(getI18n('vxe.error.noGroup', ['remove']))
-      // insertGroupRow($xeTable, newRecords, false)
       } else {
         newRecords.forEach(item => {
           const rowid = getRowid($xeTable, item)
@@ -217,12 +198,6 @@ function handleInsertRowAt ($xeTable: VxeTableConstructor & VxeTablePrivateMetho
           warnLog('vxe.error.unableInsert')
           insertTreeRow($xeTable, newRecords, true)
         }
-      } else if (isRowGroupStatus) {
-        // 如果分组
-        if (treeConfig) {
-          throw new Error(getI18n('vxe.error.noTree', ['insert']))
-        }
-        warnLog(getI18n('vxe.error.noGroup', ['remove']))
       } else {
         if (treeConfig) {
           throw new Error(getI18n('vxe.error.noTree', ['insert']))
@@ -525,7 +500,7 @@ export default {
       const internalData = $xeTable as unknown as TableInternalData
 
       const { treeConfig } = props
-      const { editStore, isRowGroupStatus } = reactData
+      const { editStore } = reactData
       const { tableFullTreeData, selectCheckboxMaps, afterFullData, mergeBodyList, tableFullData, pendingRowMaps, insertRowMaps, removeRowMaps } = internalData
       const checkboxOpts = $xeTable.computeCheckboxOpts
       const treeOpts = $xeTable.computeTreeOpts
@@ -581,9 +556,6 @@ export default {
               afterFullData.splice(afIndex, 1)
             }
           })
-        } else if (isRowGroupStatus) {
-          // 如果分组
-          warnLog(getI18n('vxe.error.noGroup', ['remove']))
         } else {
           rows.forEach((row: any) => {
             const tfIndex = this.findRowIndexOf(tableFullData, row)

package/packages/table/module/keyboard/mixin.ts

@@ -346,8 +346,8 @@ export default {
       const $xeTable = this as VxeTableConstructor & VxeTablePrivateMethods
 
       const { editConfig, editOpts, handleSelected, checkboxConfig, checkboxOpts, mouseConfig, mouseOpts } = this
-      if (mouseConfig && mouseOpts.area && $xeTable.triggerCellAreaMousedownEvent) {
-        return $xeTable.triggerCellAreaMousedownEvent(evnt, params)
+      if (mouseConfig && mouseOpts.area && $xeTable.triggerCellAreaMousednEvent) {
+        return $xeTable.triggerCellAreaMousednEvent(evnt, params)
       } else {
         if (checkboxConfig && checkboxOpts.range) {
           this.handleCheckboxRangeEvent(evnt, params)

package/packages/table/src/columnInfo.ts

@@ -14,7 +14,7 @@ export class ColumnInfo {
     const tableProps = $xeTable
     const $xeGrid = $xeTable.$xeGrid as VxeGridConstructor & GridPrivateMethods
 
-    const proxyOpts = $xeGrid ? $xeGrid.proxyOpts : null
+    const proxyOpts = $xeGrid ? $xeGrid.computeProxyOpts : null
     const formatter = _vm.formatter
     const visible = XEUtils.isBoolean(_vm.visible) ? _vm.visible : true
 
@@ -53,11 +53,6 @@ export class ColumnInfo {
         }
       }
     }
-    if (_vm.aggFunc) {
-      if (!$xeTable.handlePivotTableAggregateData && _vm.aggFunc !== true) {
-        errLog('vxe.error.errProp', [`column.agg-func=${_vm.aggFunc}`, 'column.agg-func=true'])
-      }
-    }
 
     Object.assign(this, {
       // 基本属性

package/packages/table/src/methods.ts

@@ -7063,8 +7063,7 @@ const Methods = {
         const childList: any[] = vals[2]
         let sLen = 0 // 已选
         let hLen = 0 // 半选
-        let vLen = 0 // 有效子行
-        const cLen = childList.length // 有效子行
+        let vLen = 0 // 有效行
         childList.forEach(
           checkMethod
             ? (item) => {
@@ -7097,25 +7096,15 @@ const Methods = {
             }
         )
 
-        let isSelected = false
-        if (cLen > 0) {
-          if (vLen > 0) {
-            isSelected = (sLen > 0 || hLen > 0) && sLen >= vLen
+        let isSelected = (sLen >= vLen && (vLen >= 1 || hLen >= 1))
+        if (checkMethod) {
+          if (checkMethod({ $table: $xeTable, row })) {
+            isSelected = sLen >= vLen
           } else {
-            // 如果存在子项禁用
-            if ((sLen > 0 && sLen >= vLen)) {
-              isSelected = true
-            } else if (selectCheckboxMaps[rowid]) {
-              isSelected = true
-            } else {
-              isSelected = false
-            }
+            isSelected = selectCheckboxMaps[rowid]
           }
-        } else {
-          // 如果无子项
-          isSelected = selectCheckboxMaps[rowid]
         }
-        const halfSelect = !isSelected && (sLen > 0 || hLen > 0)
+        const halfSelect = !isSelected && (sLen >= 1 || hLen >= 1)
 
         if (checkField) {
           XEUtils.set(row, checkField, isSelected)
@@ -7159,9 +7148,7 @@ const Methods = {
     const { handleGetRowId } = createHandleGetRowId($xeTable)
 
     let sLen = 0 // 已选
-    let dsLen = 0 // 禁用的已选
     let hLen = 0 // 半选
-    let dhLen = 0 // 禁用的半选
     let vLen = 0 // 有效行
 
     const rootList = (treeConfig ? afterTreeFullData : (isRowGroupStatus ? afterGroupFullData : afterFullData))
@@ -7178,9 +7165,9 @@ const Methods = {
           vLen++
         } else {
           if (selected) {
-            dsLen++
+            sLen++
           } else if (treeIndeterminateRowMaps[childRowid]) {
-            dhLen++
+            hLen++
           }
         }
       }
@@ -7196,7 +7183,7 @@ const Methods = {
       })
 
     const isSelected = rootList.length > 0 ? (vLen > 0 ? (sLen >= vLen) : (sLen >= rootList.length)) : false
-    let halfSelect = !isSelected && (sLen > 0 || hLen > 0 || dsLen > 0 || dhLen > 0)
+    let halfSelect = !isSelected && (sLen >= 1 || hLen >= 1)
 
     // 如果复选框启用保留记录，当保留数据存在时显示半选
     if (!isSelected && !halfSelect && showReserveStatus) {
@@ -8141,8 +8128,6 @@ const Methods = {
           }
 
           return $xeTable.$nextTick().then(() => {
-            updateRowOffsetTop($xeTable)
-            updateRowExpandStyle($xeTable)
             $xeTable.updateCellAreas()
             $xeTable.recalculate()
           }).then(() => {

package/packages/table/src/props.ts

@@ -55,7 +55,7 @@ export default {
     default: () => getConfig().table.fit
   },
   // 表格是否加载中
-  loading: Boolean,
+  loading: Boolean as PropType<VxeTablePropTypes.Loading>,
   // 所有的列对其方式
   align: {
     type: String,
@@ -246,11 +246,11 @@ export default {
   // 查找/替换配置项
   fnrConfig: Object,
   // 编辑配置项
-  editConfig: [Boolean, Object],
+  editConfig: [Boolean, Object] as PropType<VxeTablePropTypes.EditConfig>,
   // 校验配置项
-  validConfig: Object,
+  validConfig: Object as PropType<VxeTablePropTypes.ValidConfig>,
   // 校验规则配置项
-  editRules: Object,
+  editRules: Object as PropType<VxeTablePropTypes.EditRules>,
   // 加载中配置项
   loadingConfig: Object,
   // 空内容渲染配置项