vxe-pc-ui 4.20.22 → 4.20.23

package/lib/locale/zh-TW.umd.js

@@ -39,187 +39,187 @@ module.exports = __toCommonJS(zh_TW_exports);
 var zh_TW_default = {
   vxe: {
     base: {
-      pleaseInput: "请输入",
-      pleaseSelect: "请选择",
+      pleaseInput: "請輸入",
+      pleaseSelect: "請選擇",
       comma: "，",
       fullStop: "。"
     },
     loading: {
-      text: "加载中..."
+      text: "載入中..."
     },
     error: {
-      downErr: "下载失败",
-      errLargeData: "当绑定的数据量过大时，应该请使用 {0}，否则可能会出现卡顿",
-      groupFixed: "如果使用分组表头，冻结列必须按组设置",
-      groupMouseRange: '分组表头与 "{0}" 不能同时使用，这可能会出现错误',
-      groupTag: '分组列头应该使用 "{0}" 而不是 "{1}"，这可能会出现错误',
-      scrollErrProp: '启用虚拟滚动后不支持该参数 "{0}"',
-      errConflicts: '参数 "{0}" 与 "{1}" 有冲突',
-      modelConflicts: '绑定的字段值 "{0}" 与 "{1}" 存在冲突，将会出现错误',
-      notSupportProp: '当启用参数 "{0}" 时不支持 "{1}"，应该为 "{2}"，否则将会出现错误',
+      downErr: "下載失敗",
+      errLargeData: "當綁定的數據量過大時，應該請使用 {0}，否則可能會出現卡頓",
+      groupFixed: "如果使用分組表頭，凍結列必須按組設置",
+      groupMouseRange: '分組表頭與 "{0}" 不能同時使用，這可能會出現錯誤',
+      groupTag: '分組列頭應該使用 "{0}" 而不是 "{1}"，這可能會出現錯誤',
+      scrollErrProp: '啟用虛擬滾動後不支持該參數 "{0}"',
+      errConflicts: '參數 "{0}" 與 "{1}" 有衝突',
+      modelConflicts: '綁定的字段值 "{0}" 與 "{1}" 存在衝突，將會出現錯誤',
+      notSupportProp: '當啟用參數 "{0}" 時不支持 "{1}"，應該為 "{2}"，否則將會出現錯誤',
       reqSupportProp: '当使用 "{0}" 时，应该设置 "{1}"，否则可能会出现错误',
-      notConflictProp: '当使用 "{0}" 时，应该设置 "{1}"，否则可能会存在功能冲突',
-      unableInsert: "无法插入到指定位置，请检查参数是否正确",
-      useErr: '安装 "{0}" 模块时发生错误，可能顺序不正确，依赖的模块需要在 Table 之前安装',
-      barUnableLink: "工具栏无法关联表格",
-      expandContent: '展开行的插槽应该是 "content"，请检查是否正确',
+      notConflictProp: '當使用 "{0}" 時，應該設置 "{1}"，否則可能會存在功能衝突',
+      unableInsert: "無法插入到指定位置，請檢查參數是否正確",
+      useErr: '安裝 "{0}" 模塊時發生錯誤，可能順序不正確，依賴的模塊需要在 Table 之前安裝',
+      barUnableLink: "工具欄無法關聯表格",
+      expandContent: '展開行的插槽應該是 "content"，請檢查是否正確',
       reqComp: '缺少 "{0}" 组件，请检查是否正确安装。 https://vxeui.com/#/start/useUI/useGlobal',
-      reqModule: '缺少 "{0}" 模块',
-      reqProp: '缺少必要的 "{0}" 参数，这可能会导致出现错误',
-      emptyProp: '参数 "{0}" 不允许为空',
-      errProp: '不支持的参数 "{0}"，可能为 "{1}"',
-      colRepet: 'column.{0}="{1}" 重复了，这可能会导致某些功能无法使用',
+      reqModule: '缺少 "{0}" 模塊',
+      reqProp: '缺少必要的 "{0}" 參數，這可能會導致出現錯誤',
+      emptyProp: '參數 "{0}" 不允許為空',
+      errProp: '不支持的參數 "{0}"，可能為 "{1}"',
+      colRepet: 'column.{0}="{1}" 重複了，這可能會導致某些功能無法使用',
       notFunc: '方法 "{0}" 不存在',
-      errFunc: '参数 "{0}" 不是一个方法',
-      notValidators: '全局校验 "{0}" 不存在',
+      errFunc: '參數 "{0}" 不是一個方法',
+      notValidators: '全局校驗 "{0}" 不存在',
       notFormats: '全局格式化 "{0}" 不存在',
       notCommands: '全局指令 "{0}" 不存在',
       notSlot: '插槽 "{0}" 不存在',
-      noTree: '树结构不支持 "{0}"',
-      noGroup: '数据分组后不支持 "{0}"',
-      notProp: '不支持的参数 "{0}"',
+      noTree: '樹結構不支持 "{0}"',
+      noGroup: '數據分組後不支持 "{0}"',
+      notProp: '不支持的參數 "{0}"',
       returnErr: '参数 "{0}" 的返回值期望是 "{1}" 实际是 "{2}"',
       notSupportReturn: '当返回值为 "{0}" 时的参数应该使用用 "{1}" 而不是 "{2}"',
-      checkProp: '当数据量过大时可能会导致复选框卡顿，建议设置参数 "{0}" 提升渲染速度',
-      coverProp: '"{0}" 的参数 "{1}" 重复定义，这可能会出现错误',
-      uniField: '字段名 "{0}" 重复定义，这可能会出现错误',
-      repeatKey: '主键重复 {0}="{1}"，这可能会出现错误',
+      checkProp: '當數據量過大時可能會導致複選框卡頓，建議設置參數 "{0}" 提升渲染速度',
+      coverProp: '"{0}" 的參數 "{1}" 重複定義，這可能會出現錯誤',
+      uniField: '字段名 "{0}" 重複定義，這可能會出現錯誤',
+      repeatKey: '主鍵重複 {0}="{1}"，這可能會出現錯誤',
       repeatProp: '参数重复 {0}="{1}"，这可能会出现错误',
-      delFunc: '方法 "{0}" 已废弃，请使用 "{1}"',
-      delProp: '参数 "{0}" 已废弃，请使用 "{1}"',
-      delEvent: '事件 "{0}" 已废弃，请使用 "{1}"',
-      removeProp: '参数 "{0}" 已废弃，不建议使用，这可能会导致出现错误',
-      errFormat: '全局的格式化内容应该使用 "VXETable.formats" 定义，挂载 "formatter={0}" 的方式已不建议使用',
-      notType: '不支持的文件类型 "{0}"',
-      notExp: "该浏览器不支持导入/导出功能",
-      impFields: "导入失败，请检查字段名和数据格式是否正确",
-      treeNotImp: "树表格不支持导入",
-      treeCrossDrag: "只能拖拽第一层级",
-      treeDragChild: "父级不能拖拽到自己的子级中",
+      delFunc: '方法 "{0}" 已廢棄，請使用 "{1}"',
+      delProp: '參數 "{0}" 已廢棄，請使用 "{1}"',
+      delEvent: '事件 "{0}" 已廢棄，請使用 "{1}"',
+      removeProp: '參數 "{0}" 已廢棄，不建議使用，這可能會導致出現錯誤',
+      errFormat: '全局的格式化內容應該使用 "VXETable.formats" 定義，掛載 "formatter={0}" 的方式已不建議使用',
+      notType: '不支持的文件類型 "{0}"',
+      notExp: "該瀏覽器不支持導入/導出功能",
+      impFields: "導入失敗，請檢查字段名和數據格式是否正確",
+      treeNotImp: "樹表格不支持導入",
+      treeCrossDrag: "只能拖拽第一層級",
+      treeDragChild: "父級不能拖拽到自己的子級中",
       reqPlugin: '扩展插件未安装 "{1}" https://vxeui.com/other{0}/#/{1}/start/npmInstall',
-      errMaxRow: "超过支持的最大数据量 {0} 行，这可能会导致出现错误",
-      useNew: "不建议使用 {0}，请使用 {1}",
+      errMaxRow: "超過支持的最大數據量 {0} 行，這可能會導致出現錯誤",
+      useNew: "不建議使用 {0}，請使用 {1}",
       errorVersion: "版本不匹配，当前版本 {0}，最低支持版本为 {1}"
     },
     table: {
-      emptyText: "暂无数据",
-      allTitle: "全选/取消",
-      seqTitle: "序号",
+      emptyText: "暫無數據",
+      allTitle: "全選/取消",
+      seqTitle: "序號",
       actionTitle: "操作",
-      confirmFilter: "筛选",
+      confirmFilter: "篩選",
       resetFilter: "重置",
       allFilter: "全部",
       sortAsc: "升序：最低到最高",
       sortDesc: "降序：最高到最低",
-      filter: "对所选的列启用筛选",
-      impSuccess: "成功导入 {0} 条记录",
-      expLoading: "正在导出中",
-      expSuccess: "导出成功",
-      expError: "导出失败",
-      expFilename: "导出_{0}",
-      expOriginFilename: "导出_源_{0}",
-      customTitle: "个性化设置",
+      filter: "對所選的列啟用篩選",
+      impSuccess: "成功導入 {0} 條記錄",
+      expLoading: "正在導出中",
+      expSuccess: "導出成功",
+      expError: "導出失敗",
+      expFilename: "導出_{0}",
+      expOriginFilename: "導出_源_{0}",
+      customTitle: "列設置",
       customAll: "全部",
-      customConfirm: "确认",
-      customClose: "关闭",
+      customConfirm: "確認",
+      customClose: "關閉",
       customCancel: "取消",
-      customRestore: "恢复默认",
-      maxFixedCol: "最大冻结列的数量不能超过 {0} 个",
-      maxGroupCol: "最大分组字段的数量不能超过 {0} 个",
-      dragTip: "移动：{0}",
-      resizeColTip: "宽：{0} 像素",
+      customRestore: "恢復默認",
+      maxFixedCol: "最大凍結列的數量不能超過 {0} 個",
+      maxGroupCol: "最大分組字段的數量不能超過 {0} 個",
+      dragTip: "移動：{0}",
+      resizeColTip: "寬：{0} 像素",
       resizeRowTip: "高：{0} 像素",
       rowGroupContentTotal: "{0}（{1}）",
       menuLoading: "加载中..."
     },
     grid: {
-      selectOneRecord: "请至少选择一条记录！",
-      deleteSelectRecord: "您确定要删除所选记录吗？",
-      removeSelectRecord: "您确定要移除所选记录吗？",
-      dataUnchanged: "数据未改动！",
-      delSuccess: "成功删除所选记录！",
+      selectOneRecord: "請至少選擇一條記錄！",
+      deleteSelectRecord: "您確定要刪除所選記錄嗎？",
+      removeSelectRecord: "您確定要移除所選記錄嗎？",
+      dataUnchanged: "數據未改動！",
+      delSuccess: "成功刪除所選記錄！",
       saveSuccess: "保存成功！",
-      operError: "发生错误，操作失败！"
+      operError: "發生錯誤，操作失敗！"
     },
     select: {
       clear: "清除",
-      allChecked: "全选",
+      allChecked: "全選",
       total: "已选 {0} 项",
       close: "关闭",
-      search: "搜索",
-      loadingText: "加载中...",
-      emptyText: "暂无数据",
-      maxSize: "最大可选择的数量不能超过 {0} 个",
-      overSizeErr: "已超出最大可选数量 {0} 个，超出部分将被忽略！",
-      searchEmpty: "未匹配到数据！"
+      search: "搜尋",
+      loadingText: "載入中",
+      emptyText: "暫無數據",
+      maxSize: "最大可選擇的數量不能超過 {0} 個",
+      overSizeErr: "已超出最大可選數量 {0} 個，超出部分將被忽略！",
+      searchEmpty: "未匹配到數據！"
     },
     list: {
       allChecked: "全选",
       dragTip: "移动：{0}"
     },
     tree: {
-      searchEmpty: "未匹配到数据！",
-      dragTip: "移动：{0}"
+      searchEmpty: "未匹配到數據！",
+      dragTip: "移動：{0}"
     },
     treeSelect: {
       clearChecked: "清除",
-      allChecked: "全选",
-      allExpand: "全部展开",
+      allChecked: "全選",
+      allExpand: "全部展開",
       clearExpand: "全部收起",
       total: "已选 {0} 项",
       filterCount: "共找到 {0} 条记录",
       close: "关闭",
-      search: "搜索",
-      emptyText: "暂无数据"
+      search: "搜尋",
+      emptyText: "暫無數據"
     },
     tableSelect: {
       filterCount: "共找到 {0} 条记录"
     },
     pager: {
       goto: "前往",
-      gotoTitle: "页数",
-      pagesize: "{0}条/页",
-      total: "共 {0} 条记录",
-      pageClassifier: "页",
-      homePage: "首页",
-      homePageTitle: "首页",
-      prevPage: "上一页",
-      prevPageTitle: "上一页",
-      nextPage: "下一页",
-      nextPageTitle: "下一页",
-      prevJump: "向上跳页",
-      prevJumpTitle: "向上跳页",
-      nextJump: "向下跳页",
-      nextJumpTitle: "向下跳页",
-      endPage: "末页",
-      endPageTitle: "末页"
+      gotoTitle: "頁數",
+      pagesize: "{0}條/頁",
+      total: "共 {0} 條記錄",
+      pageClassifier: "頁",
+      homePage: "首頁",
+      homePageTitle: "首頁",
+      prevPage: "上一頁",
+      prevPageTitle: "上一頁",
+      nextPage: "下一頁",
+      nextPageTitle: "下一頁",
+      prevJump: "向上跳頁",
+      prevJumpTitle: "向上跳頁",
+      nextJump: "向下跳頁",
+      nextJumpTitle: "向下跳頁",
+      endPage: "末頁",
+      endPageTitle: "末頁"
     },
     alert: {
-      title: "系统提示"
+      title: "系統提示"
     },
     button: {
-      confirm: "确认",
+      confirm: "確認",
       cancel: "取消",
       clear: "清除"
     },
     filter: {
-      search: "搜索"
+      search: "搜尋"
     },
     custom: {
-      cstmTitle: "个性化设置",
-      cstmRestore: "恢复默认",
+      cstmTitle: "列設置",
+      cstmRestore: "恢復默認",
       cstmCancel: "取消",
-      cstmConfirm: "确定",
-      cstmConfirmRestore: "请确认是否恢复成默认列配置？",
-      cstmDragTarget: "移动：{0}",
+      cstmConfirm: "確定",
+      cstmConfirmRestore: "請確認是否恢復成默認列配置？",
+      cstmDragTarget: "移動：{0}",
       setting: {
         colSort: "排序",
         sortHelpTip: "点击图标开始拖动",
-        colTitle: "列标题",
-        colResizable: "列宽（像素）",
-        colVisible: "是否显示",
-        colFixed: "冻结列",
-        colFixedMax: "冻结列（{0}）",
+        colTitle: "列標題",
+        colResizable: "列寬（像素）",
+        colVisible: "是否顯示",
+        colFixed: "凍結列",
+        colFixedMax: "凍結列（{0}）",
         colAlign: "对齐方式",
         colHeadAlign: "表头对齐方式",
         colFootAlign: "表尾对齐方式",
@@ -244,46 +244,46 @@ var zh_TW_default = {
     },
     import: {
       modes: {
-        covering: "覆盖方式（直接覆盖表格数据）",
-        insert: "底部追加（在表格的底部追加新数据）",
-        insertTop: "顶部追加（在表格的顶部追加新数据）",
-        insertBottom: "底部追加（在表格的底部追加新数据）"
+        covering: "覆蓋方式（直接覆蓋表格數據）",
+        insert: "底部追加（在表格的底部追加新數據）",
+        insertTop: "頂部追加（在表格的頂部追加新數據）",
+        insertBottom: "底部追加（在表格的底部追加新數據）"
       },
-      impTitle: "导入数据",
+      impTitle: "導入數據",
       impFile: "文件名",
-      impSelect: "选择文件",
-      impType: "文件类型",
-      impOpts: "参数设置",
-      impMode: "导入模式",
-      impConfirm: "导入",
+      impSelect: "選擇文件",
+      impType: "文件類型",
+      impOpts: "參數設置",
+      impMode: "導入模式",
+      impConfirm: "導入",
       impCancel: "取消"
     },
     export: {
       types: {
-        csv: "CSV (逗号分隔)(*.csv)",
-        html: "网页(*.html)",
-        xml: "XML 数据(*.xml)",
-        txt: "文本文件(制表符分隔)(*.txt)",
+        csv: "CSV (逗號分隔)(*.csv)",
+        html: "網頁(*.html)",
+        xml: "XML 數據(*.xml)",
+        txt: "文本文件(製表符分隔)(*.txt)",
         xls: "Excel 97-2003 工作簿(*.xls)",
         xlsx: "Excel 工作簿(*.xlsx)",
         pdf: "PDF (*.pdf)"
       },
       modes: {
-        empty: "空数据",
-        current: "当前数据（当前页的数据）",
-        selected: "选中数据（当前页选中的数据）",
-        all: "全量数据（包括所有分页的数据）"
+        empty: "空數據",
+        current: "當前數據（當前頁的數據）",
+        selected: "選中數據（當前頁選中的數據）",
+        all: "全量數據（包括所有分頁的數據）"
       },
-      printTitle: "打印数据",
-      expTitle: "导出数据",
+      printTitle: "打印數據",
+      expTitle: "導出數據",
       expName: "文件名",
-      expNamePlaceholder: "请输入文件名",
-      expSheetName: "标题",
-      expSheetNamePlaceholder: "请输入标题",
-      expType: "保存类型",
-      expMode: "选择数据",
+      expNamePlaceholder: "請輸入文件名",
+      expSheetName: "標題",
+      expSheetNamePlaceholder: "請輸入標題",
+      expType: "保存類型",
+      expMode: "選擇數據",
       expCurrentColumn: "全部字段",
-      expColumn: "选择字段",
+      expColumn: "選擇字段",
       widthMode: "列宽设置",
       wModeTitle: "设置打印时列宽的渲染方式",
       wdModes: {
@@ -291,61 +291,61 @@ var zh_TW_default = {
         auto: "自适应（根据内容自适应列宽）",
         scale: "等比例（根据页面比例渲染列宽）"
       },
-      expOpts: "参数设置",
-      expOptHeader: "表头",
-      expHeaderTitle: "是否需要表头",
+      expOpts: "參數設置",
+      expOptHeader: "表頭",
+      expHeaderTitle: "是否需要表頭",
       expOptFooter: "表尾",
       expFooterTitle: "是否需要表尾",
-      expOptColgroup: "分组表头",
-      expOptTitle: "列标题",
-      expTitleTitle: "是否为列标题，否则显示为列的字段名",
-      expColgroupTitle: "如果存在，则支持带有分组结构的表头",
-      expOptMerge: "合并",
-      expMergeTitle: "如果存在，则支持带有合并结构的单元格",
-      expOptAllExpand: "展开树",
-      expAllExpandTitle: "如果存在，则支持将带有层级结构的数据全部展开",
+      expOptColgroup: "分組表頭",
+      expOptTitle: "列標題",
+      expTitleTitle: "是否為列標題，否則顯示為列的字段名",
+      expColgroupTitle: "如果存在，則支持帶有分組結構的表頭",
+      expOptMerge: "合併",
+      expMergeTitle: "如果存在，則支持帶有合併結構的單元格",
+      expOptAllExpand: "展開樹",
+      expAllExpandTitle: "如果存在，則支持將帶有層級結構的數據全部展開",
       expOptTreeAllExpand: "展开树",
       expTreeAllExpandTitle: "如果存在，则自动展开所有树层级",
       expOptRowGroupAllExpand: "展开分组",
       expRowGroupAllExpandTitle: "如果存在，则自动展开所有分组层级",
-      expOptUseStyle: "样式",
-      expUseStyleTitle: "如果存在，则支持带样式的单元格",
-      expOptOriginal: "源数据",
-      expOriginalTitle: "如果为源数据，则支持导入到表格中",
-      expPrint: "打印",
-      expConfirm: "导出",
+      expOptUseStyle: "樣式",
+      expUseStyleTitle: "如果存在，則支持帶樣式的單元格",
+      expOptOriginal: "源數據",
+      expOriginalTitle: "如果為源數據，則支持導入到表格中",
+      expPrint: "列印",
+      expConfirm: "導出",
       expCancel: "取消"
     },
     modal: {
-      errTitle: "错误提示",
+      errTitle: "錯誤提示",
       zoomMin: "最小化",
       zoomIn: "最大化",
-      zoomOut: "还原",
-      close: "关闭",
-      miniMaxSize: "最小化窗口的数量不能超过 {0} 个",
-      footPropErr: "show-footer 仅用于启用表尾，需配合 show-confirm-button | show-cancel-button | 插槽使用"
+      zoomOut: "還原",
+      close: "關閉",
+      miniMaxSize: "最小化窗口的數量不能超過 {0} 個",
+      footPropErr: "show-footer 僅用於啟用表尾，需配合 show-confirm-button | show-cancel-button | 插槽使用"
     },
     drawer: {
-      close: "关闭"
+      close: "關閉"
     },
     form: {
       folding: "收起",
-      unfolding: "展开"
+      unfolding: "展開"
     },
     toolbar: {
-      import: "导入",
-      export: "导出",
-      print: "打印",
-      refresh: "刷新",
-      zoomIn: "全屏",
-      zoomOut: "还原",
-      custom: "个性化设置",
+      import: "導入",
+      export: "導出",
+      print: "列印",
+      refresh: "重新整理",
+      zoomIn: "全螢幕",
+      zoomOut: "還原",
+      custom: "列設置",
       customAll: "全部",
-      customConfirm: "确认",
+      customConfirm: "確認",
       customRestore: "重置",
-      fixedLeft: "冻结在左侧",
-      fixedRight: "冻结在右侧",
-      cancelFixed: "取消冻结列"
+      fixedLeft: "凍結在左側",
+      fixedRight: "凍結在右側",
+      cancelFixed: "取消凍結列"
     },
     iconPicker: {
       search: "搜索",
@@ -355,7 +355,7 @@ var zh_TW_default = {
       yearTitle: "{0} 年"
     },
     dateRangePicker: {
-      pleaseRange: "请选择开始日期与结束日期"
+      pleaseRange: "請選擇開始日期與結束日期"
     },
     input: {
       date: {
@@ -378,20 +378,20 @@ var zh_TW_default = {
           date: "yyyy-MM-dd",
           time: "HH:mm:ss",
           datetime: "yyyy-MM-dd HH:mm:ss",
-          week: "yyyy 年第 WW 周",
+          week: "yyyy 年第 WW 週",
           month: "yyyy-MM",
           quarter: "yyyy 年第 q 季度",
           year: "yyyy"
         },
         weeks: {
           w: "",
-          w0: "周日",
-          w1: "周一",
-          w2: "周二",
-          w3: "周三",
-          w4: "周四",
-          w5: "周五",
-          w6: "周六"
+          w0: "週日",
+          w1: "週一",
+          w2: "週二",
+          w3: "週三",
+          w4: "週四",
+          w5: "週五",
+          w6: "週六"
         },
         months: {
           m0: "一月",
@@ -430,79 +430,79 @@ var zh_TW_default = {
       currencySymbol: "¥"
     },
     imagePreview: {
-      popupTitle: "预览",
+      popupTitle: "預覽",
       operBtn: {
-        zoomOut: "缩小",
+        zoomOut: "縮小",
         zoomIn: "放大",
-        pctFull: "等比例缩放",
-        pct11: "显示原始尺寸",
-        rotateLeft: "向左旋转",
-        rotateRight: "向右旋转",
-        print: "点击打印图片",
-        download: "点击下载图片"
+        pctFull: "等比例縮放",
+        pct11: "顯示原始尺寸",
+        rotateLeft: "向左旋轉",
+        rotateRight: "向右旋轉",
+        print: "點擊打印圖片",
+        download: "點擊下載圖片"
       }
     },
     upload: {
-      fileBtnText: "点击或拖拽上传",
-      imgBtnText: "点击或拖拽上传",
-      dragPlaceholder: "请把文件拖放到这个区域即可上传",
-      imgSizeHint: "单张{0}",
-      imgCountHint: "最多{0}张",
-      fileTypeHint: "支持 {0} 文件类型",
-      fileSizeHint: "单个文件大小不超过{0}",
-      fileCountHint: "最多可上传{0}个文件",
-      uploadTypeErr: "文件类型不匹配！",
-      overCountErr: "最多只能选择{0}个文件！",
-      overCountExtraErr: "已超出最大数量{0}个，超出的{1}个文件将被忽略！",
-      overSizeErr: "文件大小最大不能超过{0}！",
-      manualUpload: "点击上传",
-      reUpload: "重新上传",
-      uploadProgress: "上传中 {0}%",
-      uploadErr: "上传失败",
-      uploadSuccess: "上传成功",
+      fileBtnText: "點擊或拖拽上傳",
+      imgBtnText: "點擊或拖拽上傳",
+      dragPlaceholder: "請把文件拖放到這個區域即可上傳",
+      imgSizeHint: "單張{0}",
+      imgCountHint: "最多{0}張",
+      fileTypeHint: "支持 {0} 文件類型",
+      fileSizeHint: "單個文件大小不超過{0}",
+      fileCountHint: "最多可上傳{0}個文件",
+      uploadTypeErr: "文件類型不匹配！",
+      overCountErr: "最多只能選擇{0}個文件！",
+      overCountExtraErr: "已超出最大數量{0}個，超出的{1}個文件將被忽略！",
+      overSizeErr: "文件大小最大不能超過{0}！",
+      manualUpload: "點擊上傳",
+      reUpload: "重新上傳",
+      uploadProgress: "上傳中 {0}%",
+      uploadErr: "上傳失敗",
+      uploadSuccess: "上傳成功",
       moreBtnText: "更多（{0}）",
       moreImgBtnText: "图片（{0}）",
       moreFileBtnText: "文件（{0}）",
-      viewItemTitle: "点击查看",
+      viewItemTitle: "點擊查看",
       morePopup: {
         readTitle: "查看列表",
-        imageTitle: "上传图片",
-        fileTitle: "上传文件"
+        imageTitle: "上傳圖片",
+        fileTitle: "上傳文件"
       }
     },
     empty: {
-      defText: "暂无数据"
+      defText: "暫無數據"
     },
     colorPicker: {
       clear: "清除",
-      confirm: "确认",
-      copySuccess: "已复制到剪贴板：{0}",
-      hex: "十六进制"
+      confirm: "確認",
+      copySuccess: "已復製到剪貼板：{0}",
+      hex: "十六進位"
     },
     formDesign: {
-      formName: "表单名称",
-      defFormTitle: "未命名的表单",
-      widgetPropTab: "控件属性",
-      widgetFormTab: "表单属性",
+      formName: "表單名稱",
+      defFormTitle: "未命名的表單",
+      widgetPropTab: "控件屬性",
+      widgetFormTab: "表單屬性",
       error: {
-        wdFormUni: "该类型的控件在表单中只允许添加一个",
-        wdSubUni: "该类型的控件在子表中只允许添加一个"
+        wdFormUni: "該類型的控件在表單中只允許添加一個",
+        wdSubUni: "該類型的控件在子表中只允許添加一個"
       },
       styleSetting: {
-        btn: "样式设置",
-        title: "表单的样式设置",
-        layoutTitle: "控件布局",
-        verticalLayout: "上下布局",
-        horizontalLayout: "横向布局",
-        styleTitle: "标题样式",
-        boldTitle: "标题加粗",
+        btn: "樣式設置",
+        title: "表單的樣式設置",
+        layoutTitle: "控件佈局",
+        verticalLayout: "上下佈局",
+        horizontalLayout: "橫向佈局",
+        styleTitle: "標題樣式",
+        boldTitle: "標題加粗",
         fontBold: "加粗",
-        fontNormal: "常规",
-        colonTitle: "显示冒号",
-        colonVisible: "显示",
-        colonHidden: "隐藏",
-        alignTitle: "对齐方式",
-        widthTitle: "标题宽度",
+        fontNormal: "常規",
+        colonTitle: "顯示冒號",
+        colonVisible: "顯示",
+        colonHidden: "隱藏",
+        alignTitle: "對齊方式",
+        widthTitle: "標題寬度",
         alignLeft: "居左",
         alignRight: "居右",
         unitPx: "像素",
@@ -510,126 +510,126 @@ var zh_TW_default = {
       },
       widget: {
         group: {
-          base: "基础控件",
-          layout: "布局控件",
-          system: "系统控件",
-          module: "模块控件",
-          chart: "图表控件",
-          advanced: "高级控件"
+          base: "基礎控件",
+          layout: "佈局控件",
+          system: "系統控件",
+          module: "模塊控件",
+          chart: "圖表控件",
+          advanced: "高級控件"
         },
         copyTitle: "副本_{0}",
         component: {
-          input: "输入框",
+          input: "輸入框",
           textarea: "文本域",
-          select: "下拉选择",
+          select: "下拉選擇",
           row: "一行多列",
-          title: "标题",
-          text: "文本",
+          title: "標題",
+          text: "文字",
           subtable: "子表",
           VxeSwitch: "是/否",
-          VxeInput: "输入框",
-          VxeNumberInput: "数字",
+          VxeInput: "輸入框",
+          VxeNumberInput: "數字",
           VxeDatePicker: "日期",
           VxeTextarea: "文本域",
-          VxeSelect: "下拉选择",
-          VxeTreeSelect: "树形选择",
-          VxeRadioGroup: "单选框",
-          VxeCheckboxGroup: "复选框",
+          VxeSelect: "下拉選擇",
+          VxeTreeSelect: "樹形選擇",
+          VxeRadioGroup: "單選框",
+          VxeCheckboxGroup: "複選框",
           VxeUploadFile: "文件",
-          VxeUploadImage: "图片",
-          VxeRate: "评分",
-          VxeSlider: "滑块"
+          VxeUploadImage: "圖片",
+          VxeRate: "評分",
+          VxeSlider: "滑桿"
         }
       },
       widgetProp: {
-        name: "控件名称",
-        placeholder: "提示语",
-        required: "必填校验",
-        multiple: "允许多选",
+        name: "控件名稱",
+        placeholder: "提示語",
+        required: "必填校驗",
+        multiple: "允許多選",
         displaySetting: {
-          name: "显示设置",
-          pc: "电脑端",
-          mobile: "手机端",
-          visible: "显示",
-          hidden: "隐藏"
+          name: "顯示設置",
+          pc: "電腦端",
+          mobile: "手機端",
+          visible: "顯示",
+          hidden: "隱藏"
         },
         dataSource: {
-          name: "数据源",
-          defValue: "选项{0}",
-          addOption: "添加选项",
-          batchEditOption: "批量编辑",
-          batchEditTip: "每行对应一个选项，支持从表格、Excel、WPS 中直接复制粘贴。",
-          batchEditSubTip: "每行对应一个选项，如果是分组，子项可以是空格或制表键开头，支持从表格、Excel、WPS 中直接复制粘贴。",
-          buildOption: "生成选项"
+          name: "數據源",
+          defValue: "選項{0}",
+          addOption: "添加選項",
+          batchEditOption: "批量編輯",
+          batchEditTip: "每行對應一個選項，支持從表格、Excel、WPS 中直接複製粘貼。",
+          batchEditSubTip: "每行對應一個選項，如果是分組，子項可以是空格或製表鍵開頭，支持從表格、Excel、WPS 中直接複製粘貼。",
+          buildOption: "生成選項"
         },
         rowProp: {
-          colSize: "列数",
-          col2: "两列",
+          colSize: "列數",
+          col2: "兩列",
           col3: "三列",
           col4: "四列",
           col6: "六列",
-          layout: "布局"
+          layout: "佈局"
         },
         textProp: {
-          name: "内容",
-          alignTitle: "对齐方式",
+          name: "內容",
+          alignTitle: "對齊方式",
           alignLeft: "居左",
           alignCenter: "居中",
           alignRight: "居右",
-          colorTitle: "字体颜色",
-          sizeTitle: "字体大小",
-          boldTitle: "字体加粗",
-          fontNormal: "常规",
+          colorTitle: "字體顏色",
+          sizeTitle: "字體大小",
+          boldTitle: "字體加粗",
+          fontNormal: "常規",
           fontBold: "加粗"
         },
         subtableProp: {
-          seqTitle: "序号",
-          showSeq: "显示序号",
-          showCheckbox: "允许多选",
-          errSubDrag: "子表不支持该控件，请使用其他控件",
-          colPlace: "将控件拖拽进来"
+          seqTitle: "序號",
+          showSeq: "顯示序號",
+          showCheckbox: "允許多選",
+          errSubDrag: "子表不支持該控件，請使用其他控件",
+          colPlace: "將控件拖拽進來"
         },
         uploadProp: {
-          limitFileCount: "文件数量限制",
+          limitFileCount: "文件數量限制",
           limitFileSize: "文件大小限制",
-          multiFile: "允许上传多个文件",
-          limitImgCount: "图片数量限制",
-          limitImgSize: "图片大小限制",
-          multiImg: "允许上传多张图片"
+          multiFile: "允許上傳多個文件",
+          limitImgCount: "圖片數量限制",
+          limitImgSize: "圖片大小限制",
+          multiImg: "允許上傳多張圖片"
         }
       }
     },
     listDesign: {
-      fieldSettingTab: "字段设置",
-      listSettingTab: "参数设置",
-      searchTitle: "查询条件",
+      fieldSettingTab: "字段設置",
+      listSettingTab: "參數設置",
+      searchTitle: "查詢條件",
       listTitle: "列表字段",
-      searchField: "查询字段",
+      searchField: "查詢字段",
       listField: "列表字段",
       activeBtn: {
-        ActionButtonUpdate: "编辑",
-        ActionButtonDelete: "删除"
+        ActionButtonUpdate: "編輯",
+        ActionButtonDelete: "刪除"
       },
       search: {
-        addBtn: "编辑",
-        emptyText: "未配置查询条件",
-        editPopupTitle: "编辑查询字段"
+        addBtn: "編輯",
+        emptyText: "未配置查詢條件",
+        editPopupTitle: "編輯查詢字段"
       },
       searchPopup: {
-        colTitle: "标题",
+        colTitle: "標題",
         saveBtn: "保存"
       }
     },
     text: {
-      copySuccess: "已复制到剪贴板",
-      copyError: "当前环境不支持该操作"
+      copySuccess: "已復製到剪貼板",
+      copyError: "當前環境不支持該操作"
     },
     countdown: {
       formats: {
         yyyy: "年",
         MM: "月",
         dd: "天",
-        HH: "时",
+        HH: "時",
         mm: "分",
         ss: "秒"
       }
@@ -647,7 +647,7 @@ var zh_TW_default = {
         quarter: "{yyyy}年第{q}季度",
         month: "{yyyy}年{MM}月",
         week: "{yyyy}年第{W}周",
-        day: "{yyyy}年{MM}月 {eLabel}",
+        day: "{yyyy}年{MM}月 {E}",
         date: "{yyyy}年{MM}月{dd}日",
         hour: "{yyyy}年{MM}月{dd}日{HH}时",
         minute: "{yyyy}年{MM}月{dd}日{HH}时{mm}分",
@@ -658,7 +658,7 @@ var zh_TW_default = {
         quarter: "{q}季度",
         month: "{M}月",
         week: "{W}周",
-        day: "{eLabel}",
+        day: "{d}",
         date: "{d}",
         hour: "{HH}",
         minute: "{mm}",
@@ -669,7 +669,7 @@ var zh_TW_default = {
         quarter: "{start.q}~{end.q}季度",
         month: "{start.M}~{end.M}月",
         week: "{start.W}~{end.W}周",
-        day: "{eStartLabel}~{eEndLabel}",
+        day: "{sE}~{eE}",
         date: "{start.d}~{end.d}",
         hour: "{start.HH}~{end.HH}",
         minute: "{start.mm}~{end.mm}",
@@ -697,40 +697,40 @@ var zh_TW_default = {
     plugins: {
       extendCellArea: {
         area: {
-          mergeErr: "无法对合并单元格进行该操作",
-          multiErr: "无法对多重选择区域进行该操作",
-          selectErr: "无法操作指定区域的单元格",
-          extendErr: "若要执行此操作，所有合并的单元格需大小相同",
-          pasteMultiErr: "无法粘贴，需要相同大小的复制的区域和粘贴的区域才能执行此操作",
-          cpInvalidErr: "该操作无法进行，您选择的区域中存在被禁止的列（{0}）"
+          mergeErr: "無法對合併單元格進行該操作",
+          multiErr: "無法對多重選擇區域進行該操作",
+          selectErr: "無法操作指定區域的單元格",
+          extendErr: "若要执行此操作，所有合併的單元格需大小相同",
+          pasteMultiErr: "無法粘貼，需要相同大小的複制的區域和粘貼的區域才能執行此操作",
+          cpInvalidErr: "該操作無法進行，您選擇的區域中存在被禁止的列（{0}）"
         },
         fnr: {
-          title: "查找和替换",
+          title: "查找和替換",
           titleFd: "查找",
           titleRe: "替换",
           findLabel: "查找",
-          replaceLabel: "替换",
-          findTitle: "查找内容：",
-          replaceTitle: "替换为：",
+          replaceLabel: "替換",
+          findTitle: "查找內容：",
+          replaceTitle: "替換為：",
           tabs: {
             find: "查找",
-            replace: "替换"
+            replace: "替換"
           },
           filter: {
-            re: "正则表达式",
-            whole: "全词匹配",
-            sensitive: "区分大小写"
+            re: "正則表達式",
+            whole: "全詞匹配",
+            sensitive: "區分大小寫"
           },
           btns: {
-            findNext: "查找下一个",
+            findNext: "查找下一個",
             findAll: "查找全部",
-            replace: "替换",
-            replaceAll: "替换全部",
+            replace: "替換",
+            replaceAll: "替換全部",
             cancel: "取消"
           },
           header: {
             seq: "#",
-            cell: "单元格",
+            cell: "單元格",
             value: "值"
           },
           body: {
@@ -738,47 +738,47 @@ var zh_TW_default = {
             col: "列：{0}"
           },
           empty: "(空值)",
-          reError: "无效的正则表达式",
-          recordCount: "已找到 {0} 个单元格",
-          notCell: "找不到匹配的单元格",
-          replaceSuccess: "成功替换 {0} 个单元格"
+          reError: "無效的正則表達式",
+          recordCount: "已找到 {0} 個單元格",
+          notCell: "找不到匹配的單元格",
+          replaceSuccess: "成功替換 {0} 個單元格"
         }
       },
       extendPivotTable: {
         aggregation: {
-          grouping: "分组",
+          grouping: "分組",
           values: "值",
-          groupPlaceholder: "拖至此处进行分组",
-          valuesPlaceholder: "拖至此处进行聚合",
-          dragExistCol: "该列已存在",
+          groupPlaceholder: "拖至此處進行分組",
+          valuesPlaceholder: "拖至此處進行聚合",
+          dragExistCol: "該列已存在",
           sortHelpTip: "点击图标开始拖动"
         },
         aggFuncs: {
           sum: "求和",
-          count: "计数",
+          count: "計數",
           avg: "平均值",
           min: "最小值",
           max: "最大值",
-          first: "首个值",
+          first: "首個值",
           last: "末尾值"
         }
       },
       filterComplexInput: {
         menus: {
-          fixedColumn: "冻结列",
-          fixedGroup: "冻结分组",
-          cancelFixed: "取消冻结",
-          fixedLeft: "冻结左侧",
-          fixedRight: "冻结右侧"
+          fixedColumn: "凍結列",
+          fixedGroup: "凍結分組",
+          cancelFixed: "取消凍結",
+          fixedLeft: "凍結左側",
+          fixedRight: "凍結右側"
         },
         cases: {
-          equal: "等于",
-          gt: "大于",
-          lt: "小于",
-          begin: "开头是",
-          endin: "结尾是",
+          equal: "等於",
+          gt: "大於",
+          lt: "小於",
+          begin: "開頭是",
+          endin: "結尾是",
           include: "包含",
-          isSensitive: "区分大小写"
+          isSensitive: "區分大小寫"
         }
       },
       filterCombination: {
@@ -787,37 +787,37 @@ var zh_TW_default = {
           clearSort: "清除排序",
           sortAsc: "升序",
           sortDesc: "降序",
-          fixedColumn: "冻结列",
-          fixedGroup: "冻结分组",
-          cancelFixed: "取消冻结",
-          fixedLeft: "冻结左侧",
-          fixedRight: "冻结右侧",
-          clearFilter: "清除筛选",
-          textOption: "文本筛选",
-          numberOption: "数值筛选",
+          fixedColumn: "凍結列",
+          fixedGroup: "凍結分組",
+          cancelFixed: "取消凍結",
+          fixedLeft: "凍結左側",
+          fixedRight: "凍結右側",
+          clearFilter: "清除篩選",
+          textOption: "文本篩選",
+          numberOption: "數值篩選",
           dateOption: "日期筛选"
         },
         popup: {
-          title: "自定义筛选的方式",
+          title: "自定義篩選的方式",
           currColumnTitle: "显示行：",
-          and: "与",
+          and: "與",
           or: "或",
-          describeHtml: "可用 ? 代表单个字符<br/>用 * 代表任意多个字符"
+          describeHtml: "可用 ? 代表單個字符<br/>用 * 代表任意多個字符"
         },
         cases: {
-          equal: "等于",
-          unequal: "不等于",
-          gt: "大于",
-          ge: "大于或等于",
-          lt: "小于",
-          le: "小于或等于",
-          begin: "开头是",
-          notbegin: "开头不是",
-          endin: "结尾是",
-          notendin: "结尾不是",
+          equal: "等於",
+          unequal: "不等於",
+          gt: "大於",
+          ge: "大於或等於",
+          lt: "小於",
+          le: "小於或等於",
+          begin: "開頭是",
+          notbegin: "開頭不是",
+          endin: "結尾是",
+          notendin: "結尾不是",
           include: "包含",
           exclude: "不包含",
-          between: "介于",
+          between: "介於",
           isAfter: "在以下日期之后",
           eqAfter: "在以下日期之后或与之相同",
           isBefore: "在以下日期之前",
@@ -840,79 +840,79 @@ var zh_TW_default = {
           thisYear: "今年",
           lastYear: "去年",
           yearToDate: "本年度截止到现在",
-          custom: "自定义筛选",
-          insensitive: "不区分大小写",
-          isSensitive: "区分大小写"
+          custom: "自定義篩選",
+          insensitive: "不區分大小寫",
+          isSensitive: "區分大小寫"
         },
         empty: "(空白)",
-        notData: "无匹配项"
+        notData: "無匹配項"
       }
     },
     pro: {
       area: {
-        mergeErr: "无法对合并单元格进行该操作",
-        multiErr: "无法对多重选择区域进行该操作",
-        extendErr: "若要执行此操作，所有合并的单元格需大小相同",
-        pasteMultiErr: "无法粘贴，需要相同大小的复制的区域和粘贴的区域才能执行此操作"
+        mergeErr: "無法對合併單元格進行該操作",
+        multiErr: "無法對多重選擇區域進行該操作",
+        extendErr: "若要执行此操作，所有合併的單元格需大小相同",
+        pasteMultiErr: "無法粘貼，需要相同大小的複制的區域和粘貼的區域才能執行此操作"
       },
       fnr: {
-        title: "查找和替换",
+        title: "查找和替換",
         titleFd: "查找",
         titleRe: "替换",
         findLabel: "查找",
-        replaceLabel: "替换",
-        findTitle: "查找内容：",
-        replaceTitle: "替换为：",
+        replaceLabel: "替換",
+        findTitle: "查找內容：",
+        replaceTitle: "替換為：",
         tabs: {
           find: "查找",
-          replace: "替换"
+          replace: "替換"
         },
         filter: {
-          re: "正则表达式",
-          whole: "全词匹配",
-          sensitive: "区分大小写"
+          re: "正則表達式",
+          whole: "全詞匹配",
+          sensitive: "區分大小寫"
         },
         btns: {
-          findNext: "查找下一个",
+          findNext: "查找下一個",
           findAll: "查找全部",
-          replace: "替换",
-          replaceAll: "替换全部",
+          replace: "替換",
+          replaceAll: "替換全部",
           cancel: "取消"
         },
         header: {
           seq: "#",
-          cell: "单元格",
+          cell: "單元格",
           value: "值"
         },
         empty: "(空值)",
-        reError: "无效的正则表达式",
-        recordCount: "已找到 {0} 个单元格",
-        notCell: "找不到匹配的单元格",
-        replaceSuccess: "成功替换 {0} 个单元格"
+        reError: "無效的正則表達式",
+        recordCount: "已找到 {0} 個單元格",
+        notCell: "找不到匹配的單元格",
+        replaceSuccess: "成功替換 {0} 個單元格"
       }
     },
     renderer: {
-      search: "搜索",
+      search: "搜尋",
       cases: {
-        equal: "等于",
-        unequal: "不等于",
-        gt: "大于",
-        ge: "大于或等于",
-        lt: "小于",
-        le: "小于或等于",
-        begin: "开头是",
-        notbegin: "开头不是",
-        endin: "结尾是",
-        notendin: "结尾不是",
+        equal: "等於",
+        unequal: "不等於",
+        gt: "大於",
+        ge: "大於或等於",
+        lt: "小於",
+        le: "小於或等於",
+        begin: "開頭是",
+        notbegin: "開頭不是",
+        endin: "結尾是",
+        notendin: "結尾不是",
         include: "包含",
         exclude: "不包含",
-        between: "介于",
+        between: "介於",
         top10: "前10项",
         aboveAverage: "高于平均值",
         belowAverage: "低于平均值",
-        custom: "自定义筛选",
-        insensitive: "不区分大小写",
-        isSensitive: "区分大小写"
+        custom: "自定義篩選",
+        insensitive: "不區分大小寫",
+        isSensitive: "區分大小寫"
       },
       combination: {
         menus: {
@@ -920,25 +920,25 @@ var zh_TW_default = {
           clearSort: "清除排序",
           sortAsc: "升序",
           sortDesc: "降序",
-          fixedColumn: "冻结列",
-          fixedGroup: "冻结分组",
-          cancelFixed: "取消冻结",
-          fixedLeft: "冻结到左侧",
-          fixedRight: "冻结到右侧",
-          clearFilter: "清除筛选",
-          textOption: "文本筛选",
-          numberOption: "数值筛选",
+          fixedColumn: "凍結列",
+          fixedGroup: "凍結分組",
+          cancelFixed: "取消凍結",
+          fixedLeft: "凍結到左側",
+          fixedRight: "凍結到右側",
+          clearFilter: "清除篩選",
+          textOption: "文本篩選",
+          numberOption: "數值篩選",
           dateOption: "日期筛选"
         },
         popup: {
-          title: "自定义筛选的方式",
+          title: "自定義篩選的方式",
           currColumnTitle: "显示行：",
-          and: "与",
+          and: "與",
           or: "或",
-          describeHtml: "可用 ? 代表单个字符<br/>用 * 代表任意多个字符"
+          describeHtml: "可用 ? 代表單個字符<br/>用 * 代表任意多個字符"
         },
         empty: "(空白)",
-        notData: "无匹配项"
+        notData: "無匹配項"
       }
     }
   }