vislite 1.2.0 → 1.2.1-alpha.0

package/src/Eoap.ts

@@ -1,66 +1,66 @@
-import type MapType from '../types/Map'
-
-// 围绕X轴旋转
-const rotateX = function (deg: number, x: number, y: number, z: number) {
-    const cos = Math.cos(deg), sin = Math.sin(deg)
-    return [x, y * cos - z * sin, y * sin + z * cos]
-}
-
-// 围绕Y轴旋转
-const rotateY = function (deg: number, x: number, y: number, z: number) {
-    const cos = Math.cos(deg), sin = Math.sin(deg)
-    return [z * sin + x * cos, y, z * cos - x * sin]
-}
-
-// 围绕Z轴旋转
-const rotateZ = function (deg: number, x: number, y: number, z: number) {
-    const cos = Math.cos(deg), sin = Math.sin(deg)
-    return [x * cos - y * sin, x * sin + y * cos, z]
-}
-
-/* 等角斜方位投影 */
-class Eoap implements MapType {
-    readonly name: string = 'Eoap'
-
-    private __scale: number // 缩放比例
-    private __center: number[] // 投影中心经纬度
-
-    constructor(scale: number = 7, center: number[] = [107, 36]) {
-        this.__scale = scale
-        this.__center = center
-    }
-
-    use(λ: number, φ: number): [number, number, number] {
-        /**
-         * 通过旋转的方法
-         * 先旋转出点的位置
-         * 然后根据把地心到旋转中心的这条射线变成OZ这条射线的变换应用到初始化点上
-         * 这样求的的点的x,y就是最终结果
-         *
-         *  计算过程：
-         *  1.初始化点的位置是p（x,0,0）,其中x的值是地球半径除以缩放倍速
-         *  2.根据点的纬度对p进行旋转，旋转后得到的p的坐标纬度就是目标纬度
-         *  3.同样的对此刻的p进行经度的旋转，这样就获取了极点作为中心点的坐标
-         *  4.接着想象一下为了让旋转中心移动到极点需要进行旋转的经纬度是多少，记为lo和la
-         *  5.然后再对p进行经度度旋转lo获得新的p
-         *  6.然后再对p进行纬度旋转la获得新的p
-         *  7.旋转结束
-         *
-         * 特别注意：第5和第6步顺序一定不可以调换，原因来自经纬度定义上
-         * 【除了经度为0的位置，不然纬度的旋转会改变原来的经度值，反过来不会】
-         *
-         */
-        let p = rotateY((360 - φ) / 180 * Math.PI, 100 * this.__scale, 0, 0)
-        p = rotateZ(λ / 180 * Math.PI, p[0], p[1], p[2])
-        p = rotateZ((90 - this.__center[0]) / 180 * Math.PI, p[0], p[1], p[2])
-        p = rotateX((90 - this.__center[1]) / 180 * Math.PI, p[0], p[1], p[2])
-
-        return [
-            -p[0], // 加-号是因为浏览器坐标和地图不一样
-            p[1],
-            p[2]
-        ]
-    }
-}
-
-export default Eoap
+import type MapType from '../types/Map'
+
+// 围绕X轴旋转
+const rotateX = function (deg: number, x: number, y: number, z: number) {
+    const cos = Math.cos(deg), sin = Math.sin(deg)
+    return [x, y * cos - z * sin, y * sin + z * cos]
+}
+
+// 围绕Y轴旋转
+const rotateY = function (deg: number, x: number, y: number, z: number) {
+    const cos = Math.cos(deg), sin = Math.sin(deg)
+    return [z * sin + x * cos, y, z * cos - x * sin]
+}
+
+// 围绕Z轴旋转
+const rotateZ = function (deg: number, x: number, y: number, z: number) {
+    const cos = Math.cos(deg), sin = Math.sin(deg)
+    return [x * cos - y * sin, x * sin + y * cos, z]
+}
+
+/* 等角斜方位投影 */
+class Eoap implements MapType {
+    readonly name: string = 'Eoap'
+
+    private __scale: number // 缩放比例
+    private __center: number[] // 投影中心经纬度
+
+    constructor(scale: number = 7, center: number[] = [107, 36]) {
+        this.__scale = scale
+        this.__center = center
+    }
+
+    use(λ: number, φ: number): [number, number, number] {
+        /**
+         * 通过旋转的方法
+         * 先旋转出点的位置
+         * 然后根据把地心到旋转中心的这条射线变成OZ这条射线的变换应用到初始化点上
+         * 这样求的的点的x,y就是最终结果
+         *
+         *  计算过程：
+         *  1.初始化点的位置是p（x,0,0）,其中x的值是地球半径除以缩放倍速
+         *  2.根据点的纬度对p进行旋转，旋转后得到的p的坐标纬度就是目标纬度
+         *  3.同样的对此刻的p进行经度的旋转，这样就获取了极点作为中心点的坐标
+         *  4.接着想象一下为了让旋转中心移动到极点需要进行旋转的经纬度是多少，记为lo和la
+         *  5.然后再对p进行经度度旋转lo获得新的p
+         *  6.然后再对p进行纬度旋转la获得新的p
+         *  7.旋转结束
+         *
+         * 特别注意：第5和第6步顺序一定不可以调换，原因来自经纬度定义上
+         * 【除了经度为0的位置，不然纬度的旋转会改变原来的经度值，反过来不会】
+         *
+         */
+        let p = rotateY((360 - φ) / 180 * Math.PI, 100 * this.__scale, 0, 0)
+        p = rotateZ(λ / 180 * Math.PI, p[0], p[1], p[2])
+        p = rotateZ((90 - this.__center[0]) / 180 * Math.PI, p[0], p[1], p[2])
+        p = rotateX((90 - this.__center[1]) / 180 * Math.PI, p[0], p[1], p[2])
+
+        return [
+            -p[0], // 加-号是因为浏览器坐标和地图不一样
+            p[1],
+            p[2]
+        ]
+    }
+}
+
+export default Eoap

package/src/Matrix4/index.ts

@@ -1,85 +1,85 @@
-import type Matrix4Type from '../../types/Matrix4'
-
-// 两个4x4矩阵相乘
-// 或矩阵和齐次坐标相乘
-const _multiply = function (matrix4: number[], param: number[]) {
-    const newParam: number[] = []
-    for (let i = 0; i < 4; i++)
-        for (let j = 0; j < param.length / 4; j++)
-            newParam[j * 4 + i] =
-                matrix4[i] * param[j * 4] +
-                matrix4[i + 4] * param[j * 4 + 1] +
-                matrix4[i + 8] * param[j * 4 + 2] +
-                matrix4[i + 12] * param[j * 4 + 3]
-    return newParam
-}
-
-import _move from './move'
-import _rotate from './rotate'
-import _scale from './scale'
-import _transform from './transform'
-
-// 列主序存储的4x4矩阵
-
-const __initMatrix4 = [
-    1, 0, 0, 0,
-    0, 1, 0, 0,
-    0, 0, 1, 0,
-    0, 0, 0, 1
-]
-
-class Matrix4 implements Matrix4Type {
-    readonly name: string = 'Matrix4'
-
-    private __matrix4: number[]
-
-    constructor(initMatrix4: number[] = __initMatrix4) {
-        this.__matrix4 = initMatrix4
-    }
-
-    // 设置内置矩阵
-    setValue(initMatrix4: number[] = __initMatrix4) {
-        this.__matrix4 = initMatrix4
-        return this
-    }
-
-    // 移动
-    move(dis: number, a: number, b: number, c: number = 0) {
-        this.__matrix4 = _multiply(_move(dis, a, b, c), this.__matrix4)
-        return this
-    }
-
-    // 旋转
-    rotate(deg: number, a1: number, b1: number, c1?: number, a2?: number, b2?: number, c2?: number) {
-        const matrix4s = _transform(a1, b1, c1, a2, b2, c2)
-        this.__matrix4 = _multiply(_multiply(_multiply(matrix4s[1], _rotate(deg)), matrix4s[0]), this.__matrix4)
-        return this
-    }
-
-    // 缩放
-    scale(xTimes: number, yTimes: number, zTimes: number, cx: number = 0, cy: number = 0, cz: number = 0) {
-        this.__matrix4 = _multiply(_scale(xTimes, yTimes, zTimes, cx, cy, cz), this.__matrix4)
-        return this
-    }
-
-    // 乘法
-    // 可以传入一个矩阵(matrix4,flag)
-    multiply(newMatrix4: number[], flag: boolean = false) {
-        this.__matrix4 = flag ? _multiply(this.__matrix4, newMatrix4) : _multiply(newMatrix4, this.__matrix4)
-        return this
-    }
-
-    // 对一个坐标应用变换
-    // 齐次坐标(x,y,z,w)
-    use(x: number, y: number, z: number = 0, w: number = 1): [number, number, number, number] {
-        // w为0表示点位于无穷远处，忽略
-        return _multiply(this.__matrix4, [x, y, z, w]) as [number, number, number, number]
-    }
-
-    // 矩阵的值
-    value() {
-        return this.__matrix4
-    }
-}
-
+import type Matrix4Type from '../../types/Matrix4'
+
+// 两个4x4矩阵相乘
+// 或矩阵和齐次坐标相乘
+const _multiply = function (matrix4: number[], param: number[]) {
+    const newParam: number[] = []
+    for (let i = 0; i < 4; i++)
+        for (let j = 0; j < param.length / 4; j++)
+            newParam[j * 4 + i] =
+                matrix4[i] * param[j * 4] +
+                matrix4[i + 4] * param[j * 4 + 1] +
+                matrix4[i + 8] * param[j * 4 + 2] +
+                matrix4[i + 12] * param[j * 4 + 3]
+    return newParam
+}
+
+import _move from './move'
+import _rotate from './rotate'
+import _scale from './scale'
+import _transform from './transform'
+
+// 列主序存储的4x4矩阵
+
+const __initMatrix4 = [
+    1, 0, 0, 0,
+    0, 1, 0, 0,
+    0, 0, 1, 0,
+    0, 0, 0, 1
+]
+
+class Matrix4 implements Matrix4Type {
+    readonly name: string = 'Matrix4'
+
+    private __matrix4: number[]
+
+    constructor(initMatrix4: number[] = __initMatrix4) {
+        this.__matrix4 = initMatrix4
+    }
+
+    // 设置内置矩阵
+    setValue(initMatrix4: number[] = __initMatrix4) {
+        this.__matrix4 = initMatrix4
+        return this
+    }
+
+    // 移动
+    move(dis: number, a: number, b: number, c: number = 0) {
+        this.__matrix4 = _multiply(_move(dis, a, b, c), this.__matrix4)
+        return this
+    }
+
+    // 旋转
+    rotate(deg: number, a1: number, b1: number, c1?: number, a2?: number, b2?: number, c2?: number) {
+        const matrix4s = _transform(a1, b1, c1, a2, b2, c2)
+        this.__matrix4 = _multiply(_multiply(_multiply(matrix4s[1], _rotate(deg)), matrix4s[0]), this.__matrix4)
+        return this
+    }
+
+    // 缩放
+    scale(xTimes: number, yTimes: number, zTimes: number, cx: number = 0, cy: number = 0, cz: number = 0) {
+        this.__matrix4 = _multiply(_scale(xTimes, yTimes, zTimes, cx, cy, cz), this.__matrix4)
+        return this
+    }
+
+    // 乘法
+    // 可以传入一个矩阵(matrix4,flag)
+    multiply(newMatrix4: number[], flag: boolean = false) {
+        this.__matrix4 = flag ? _multiply(this.__matrix4, newMatrix4) : _multiply(newMatrix4, this.__matrix4)
+        return this
+    }
+
+    // 对一个坐标应用变换
+    // 齐次坐标(x,y,z,w)
+    use(x: number, y: number, z: number = 0, w: number = 1): [number, number, number, number] {
+        // w为0表示点位于无穷远处，忽略
+        return _multiply(this.__matrix4, [x, y, z, w]) as [number, number, number, number]
+    }
+
+    // 矩阵的值
+    value() {
+        return this.__matrix4
+    }
+}
+
 export default Matrix4

package/src/Matrix4/move.ts

@@ -1,12 +1,12 @@
-/**
- * 在(a,b,c)方向位移d
- */
-export default function (d: number, a: number, b: number, c: number = 0) {
-    const sqrt = Math.sqrt(a * a + b * b + c * c)
-    return [
-        1, 0, 0, 0,
-        0, 1, 0, 0,
-        0, 0, 1, 0,
-        a * d / sqrt, b * d / sqrt, c * d / sqrt, 1
-    ]
-}
+/**
+ * 在(a,b,c)方向位移d
+ */
+export default function (d: number, a: number, b: number, c: number = 0) {
+    const sqrt = Math.sqrt(a * a + b * b + c * c)
+    return [
+        1, 0, 0, 0,
+        0, 1, 0, 0,
+        0, 0, 1, 0,
+        a * d / sqrt, b * d / sqrt, c * d / sqrt, 1
+    ]
+}

package/src/Matrix4/rotate.ts

@@ -1,15 +1,15 @@
-/**
- * 围绕OZ轴旋转
- * 其它的旋转可以借助transform实现
- * 旋转角度单位采用弧度制
- */
-export default function (deg: number) {
-    const sin = Math.sin(deg),
-        cos = Math.cos(deg)
-    return [
-        cos, sin, 0, 0,
-        -sin, cos, 0, 0,
-        0, 0, 1, 0,
-        0, 0, 0, 1
-    ]
-}
+/**
+ * 围绕OZ轴旋转
+ * 其它的旋转可以借助transform实现
+ * 旋转角度单位采用弧度制
+ */
+export default function (deg: number) {
+    const sin = Math.sin(deg),
+        cos = Math.cos(deg)
+    return [
+        cos, sin, 0, 0,
+        -sin, cos, 0, 0,
+        0, 0, 1, 0,
+        0, 0, 0, 1
+    ]
+}

package/src/Matrix4/scale.ts

@@ -1,11 +1,11 @@
-/**
- * 围绕圆心x、y和z分别缩放xTimes, yTimes和zTimes倍
- */
-export default function (xTimes: number, yTimes: number, zTimes: number, cx: number = 0, cy: number = 0, cz: number = 0) {
-    return [
-        xTimes, 0, 0, 0,
-        0, yTimes, 0, 0,
-        0, 0, zTimes, 0,
-        cx - cx * xTimes, cy - cy * yTimes, cz - cz * zTimes, 1
-    ]
-}
+/**
+ * 围绕圆心x、y和z分别缩放xTimes, yTimes和zTimes倍
+ */
+export default function (xTimes: number, yTimes: number, zTimes: number, cx: number = 0, cy: number = 0, cz: number = 0) {
+    return [
+        xTimes, 0, 0, 0,
+        0, yTimes, 0, 0,
+        0, 0, zTimes, 0,
+        cx - cx * xTimes, cy - cy * yTimes, cz - cz * zTimes, 1
+    ]
+}

package/src/Matrix4/transform.ts

@@ -1,64 +1,64 @@
-/**
- * 针对任意射线(a1,b1,c1)->(a2,b2,c2)
- * 计算出两个变换矩阵
- * 分别为：任意射线变成OZ轴变换矩阵 + OZ轴变回原来的射线的变换矩阵
- */
-export default function (a1: number, b1: number, c1?: number, a2?: number, b2?: number, c2?: number) {
-
-    if (typeof a1 === 'number' && typeof b1 === 'number') {
-
-        // 如果设置两个点
-        // 表示二维上围绕某个点旋转
-        if (typeof c1 !== 'number') {
-            c1 = 0
-            a2 = a1
-            b2 = b1
-            c2 = 1
-        }
-        // 只设置三个点(设置不足六个点都认为只设置了三个点)
-        // 表示围绕从原点出发的射线旋转
-        else if (typeof a2 !== 'number' || typeof b2 !== 'number' || typeof c2 !== 'number') {
-            a2 = a1
-            b2 = b1
-            c2 = c1
-            a1 = 0
-            b1 = 0
-            c1 = 0
-        }
-
-        if (a1 == a2 && b1 == b2 && c1 == c2) throw new Error('It\'s not a legitimate ray!')
-
-        const sqrt1 = Math.sqrt((a2 - a1) * (a2 - a1) + (b2 - b1) * (b2 - b1)),
-            cos1 = sqrt1 != 0 ? (b2 - b1) / sqrt1 : 1,
-            sin1 = sqrt1 != 0 ? (a2 - a1) / sqrt1 : 0,
-
-            b = (a2 - a1) * sin1 + (b2 - b1) * cos1,
-            c = c2 - c1,
-
-            sqrt2 = Math.sqrt(b * b + c * c),
-            cos2 = sqrt2 != 0 ? c / sqrt2 : 1,
-            sin2 = sqrt2 != 0 ? b / sqrt2 : 0
-
-        return [
-
-            // 任意射线变成OZ轴变换矩阵
-            [
-                cos1, cos2 * sin1, sin1 * sin2, 0,
-                -sin1, cos1 * cos2, cos1 * sin2, 0,
-                0, -sin2, cos2, 0,
-                b1 * sin1 - a1 * cos1, c1 * sin2 - a1 * sin1 * cos2 - b1 * cos1 * cos2, -a1 * sin1 * sin2 - b1 * cos1 * sin2 - c1 * cos2, 1
-            ],
-
-            // OZ轴变回原来的射线的变换矩阵
-            [
-                cos1, -sin1, 0, 0,
-                cos2 * sin1, cos2 * cos1, -sin2, 0,
-                sin1 * sin2, cos1 * sin2, cos2, 0,
-                a1, b1, c1, 1
-            ]
-
-        ]
-    } else {
-        throw new Error('a1 and b1 is required!')
-    }
-}
+/**
+ * 针对任意射线(a1,b1,c1)->(a2,b2,c2)
+ * 计算出两个变换矩阵
+ * 分别为：任意射线变成OZ轴变换矩阵 + OZ轴变回原来的射线的变换矩阵
+ */
+export default function (a1: number, b1: number, c1?: number, a2?: number, b2?: number, c2?: number) {
+
+    if (typeof a1 === 'number' && typeof b1 === 'number') {
+
+        // 如果设置两个点
+        // 表示二维上围绕某个点旋转
+        if (typeof c1 !== 'number') {
+            c1 = 0
+            a2 = a1
+            b2 = b1
+            c2 = 1
+        }
+        // 只设置三个点(设置不足六个点都认为只设置了三个点)
+        // 表示围绕从原点出发的射线旋转
+        else if (typeof a2 !== 'number' || typeof b2 !== 'number' || typeof c2 !== 'number') {
+            a2 = a1
+            b2 = b1
+            c2 = c1
+            a1 = 0
+            b1 = 0
+            c1 = 0
+        }
+
+        if (a1 == a2 && b1 == b2 && c1 == c2) throw new Error('It\'s not a legitimate ray!')
+
+        const sqrt1 = Math.sqrt((a2 - a1) * (a2 - a1) + (b2 - b1) * (b2 - b1)),
+            cos1 = sqrt1 != 0 ? (b2 - b1) / sqrt1 : 1,
+            sin1 = sqrt1 != 0 ? (a2 - a1) / sqrt1 : 0,
+
+            b = (a2 - a1) * sin1 + (b2 - b1) * cos1,
+            c = c2 - c1,
+
+            sqrt2 = Math.sqrt(b * b + c * c),
+            cos2 = sqrt2 != 0 ? c / sqrt2 : 1,
+            sin2 = sqrt2 != 0 ? b / sqrt2 : 0
+
+        return [
+
+            // 任意射线变成OZ轴变换矩阵
+            [
+                cos1, cos2 * sin1, sin1 * sin2, 0,
+                -sin1, cos1 * cos2, cos1 * sin2, 0,
+                0, -sin2, cos2, 0,
+                b1 * sin1 - a1 * cos1, c1 * sin2 - a1 * sin1 * cos2 - b1 * cos1 * cos2, -a1 * sin1 * sin2 - b1 * cos1 * sin2 - c1 * cos2, 1
+            ],
+
+            // OZ轴变回原来的射线的变换矩阵
+            [
+                cos1, -sin1, 0, 0,
+                cos2 * sin1, cos2 * cos1, -sin2, 0,
+                sin1 * sin2, cos1 * sin2, cos2, 0,
+                a1, b1, c1, 1
+            ]
+
+        ]
+    } else {
+        throw new Error('a1 and b1 is required!')
+    }
+}

package/src/Mercator.ts

@@ -1,28 +1,28 @@
-import type MapType from '../types/Map'
-
-/* 墨卡托投影 */
-class Mercator implements MapType {
-    readonly name: string = 'Mercator'
-
-    use: (λ: number, φ: number) => [number, number, number]
-    constructor(scale: number = 7, center: number[] = [107, 36]) {
-
-        const perimeter = 100 * scale * Math.PI // 半周长
-
-        const help = perimeter / 180
-
-        const cx = help * center[0]  // 中心横坐标
-        const cy = -1 * help * center[1] // 中心纵坐标
-
-        this.use = (λ: number, φ: number) => {
-            return [
-                (help * λ - cx) * 0.8,
-                -1 * help * φ - cy,
-                0
-            ]
-        }
-    }
-
-}
-
+import type MapType from '../types/Map'
+
+/* 墨卡托投影 */
+class Mercator implements MapType {
+    readonly name: string = 'Mercator'
+
+    use: (λ: number, φ: number) => [number, number, number]
+    constructor(scale: number = 7, center: number[] = [107, 36]) {
+
+        const perimeter = 100 * scale * Math.PI // 半周长
+
+        const help = perimeter / 180
+
+        const cx = help * center[0]  // 中心横坐标
+        const cy = -1 * help * center[1] // 中心纵坐标
+
+        this.use = (λ: number, φ: number) => {
+            return [
+                (help * λ - cx) * 0.8,
+                -1 * help * φ - cy,
+                0
+            ]
+        }
+    }
+
+}
+
 export default Mercator

package/src/SVG.ts

@@ -1,25 +1,25 @@
-import type SVGType from '../types/SVG'
-
-import OralSVG from './common/svg/index'
-
-class SVG extends OralSVG implements SVGType {
-    constructor(el: HTMLElement | null) {
-        if (!el) {
-            throw new Error("VISLite SVG:The mount point requires an HTMLElement type but encountered null.")
-        }
-
-        const width = el.clientWidth, height = el.clientHeight
-
-        const ViewSVG = document.createElementNS("http://www.w3.org/2000/svg", 'svg')
-        el.appendChild(ViewSVG)
-
-        ViewSVG.setAttribute("width", width + "")
-        ViewSVG.setAttribute("height", height + "")
-
-        ViewSVG.setAttribute("viewBox", "0 0 " + width + " " + height)
-
-        super(ViewSVG)
-    }
-}
-
+import type SVGType from '../types/SVG'
+
+import OralSVG from './common/svg/index'
+
+class SVG extends OralSVG implements SVGType {
+    constructor(el: HTMLElement | null) {
+        if (!el) {
+            throw new Error("VISLite SVG:The mount point requires an HTMLElement type but encountered null.")
+        }
+
+        const width = el.clientWidth, height = el.clientHeight
+
+        const ViewSVG = document.createElementNS("http://www.w3.org/2000/svg", 'svg')
+        el.appendChild(ViewSVG)
+
+        ViewSVG.setAttribute("width", width + "")
+        ViewSVG.setAttribute("height", height + "")
+
+        ViewSVG.setAttribute("viewBox", "0 0 " + width + " " + height)
+
+        super(ViewSVG)
+    }
+}
+
 export default SVG

package/src/common/assemble.ts

@@ -1,23 +1,23 @@
-export default function (begin: number, end: number, step: number, count: number) {
-    const val: Array<number> = []
-    for (let index = 0; index < count; index++) val[index] = begin
-
-    // 非常类似进制数，每次调用都+1
-    return function () {
-        for (let i = 0; i < count; i++) {
-
-            // 如果当前位可以进1
-            if (val[i] + step < end) {
-                val[i] = +(val[i] + step).toFixed(7)
-                break
-            }
-
-            // 如果当前位不可以，那当前位归0，尝试下一位
-            else if (i < count - 1) {
-                val[i] = begin
-            }
-        }
-
-        return val
-    }
+export default function (begin: number, end: number, step: number, count: number) {
+    const val: Array<number> = []
+    for (let index = 0; index < count; index++) val[index] = begin
+
+    // 非常类似进制数，每次调用都+1
+    return function () {
+        for (let i = 0; i < count; i++) {
+
+            // 如果当前位可以进1
+            if (val[i] + step < end) {
+                val[i] = +(val[i] + step).toFixed(7)
+                break
+            }
+
+            // 如果当前位不可以，那当前位归0，尝试下一位
+            else if (i < count - 1) {
+                val[i] = begin
+            }
+        }
+
+        return val
+    }
 }