vibe64 0.1.35 → 0.1.37

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (210) hide show
  1. package/bin/run.js +1984 -1685
  2. package/bin/server.js +158 -111
  3. package/bin/upgrade-state.js +5754 -5522
  4. package/dist/assets/GithubBrowserTabs-BykoCFfz.js +1 -0
  5. package/dist/assets/{StudioErrorNotice-sQfmeR-z.js → StudioErrorNotice-CSrUw1QV.js} +1 -1
  6. package/dist/assets/{Vibe64AsyncModuleState-Dx7YKRPp.js → Vibe64AsyncModuleState-Do9EqX3S.js} +1 -1
  7. package/dist/assets/Vibe64AuthSettingsButton-CIwtchKm.js +5 -0
  8. package/dist/assets/Vibe64AuthSettingsButton-M44SSmZ9.css +1 -0
  9. package/dist/assets/{Vibe64DashboardBackButton-yE6cyYg2.js → Vibe64DashboardBackButton-BH_8j_VR.js} +1 -1
  10. package/dist/assets/Vibe64DashboardShell-DXVDJUAY.js +1 -0
  11. package/dist/assets/{Vibe64DashboardShell-MBkUHjs-.css → Vibe64DashboardShell-De2mbdpI.css} +1 -1
  12. package/dist/assets/{Vibe64DatabaseWorkspace-BONJdxBS.js → Vibe64DatabaseWorkspace-Ca8IHSRq.js} +3 -3
  13. package/dist/assets/{Vibe64DatabaseWorkspace-CR4pzzcf.css → Vibe64DatabaseWorkspace-DPDMxhAW.css} +1 -1
  14. package/dist/assets/Vibe64OutputControls-Co5YzwcK.css +1 -0
  15. package/dist/assets/Vibe64OutputControls-DngQNTTt.js +8 -0
  16. package/dist/assets/{Vibe64RepositoryWorkspace-CVHcT93M.css → Vibe64RepositoryWorkspace-Agyt4O-V.css} +1 -1
  17. package/dist/assets/{Vibe64RepositoryWorkspace-ByQlZbyO.js → Vibe64RepositoryWorkspace-BfsZozSJ.js} +2 -2
  18. package/dist/assets/Vibe64SessionFiles-Bl8wJ5Sk.css +1 -0
  19. package/dist/assets/Vibe64SessionFiles-n87RqqY6.js +41 -0
  20. package/dist/assets/{Vibe64TemporaryAiFixAction-BGlcrq4d.js → Vibe64TemporaryAiFixAction-BiuIE9mC.js} +1 -1
  21. package/dist/assets/{Vibe64UiStoryboardView-Brlwdvqi.js → Vibe64UiStoryboardView-BhKRpL0N.js} +1 -1
  22. package/dist/assets/{Vibe64UnavailableSessions-zwlWlcZD.js → Vibe64UnavailableSessions-Ca5nC7KH.js} +1 -1
  23. package/dist/assets/{_sessionId_-CvOkQbVy.js → _sessionId_-B_TTRB4c.js} +1 -1
  24. package/dist/assets/{_sessionTool_-Dwod5ns9.js → _sessionTool_-1V-z6Pbp.js} +1 -1
  25. package/dist/assets/_slug_-Buxpw0T4.css +1 -0
  26. package/dist/assets/_slug_-DsqilUs_.js +24 -0
  27. package/dist/assets/{access-BVu5XYm2.js → access-tl4ht_d8.js} +1 -1
  28. package/dist/assets/app-CZu7oxUO.css +1 -0
  29. package/dist/assets/app-DT4_MliP.js +1 -0
  30. package/dist/assets/{assistantRouting-CwbwfkwB.js → assistantRouting-D4XpXcEf.js} +1 -1
  31. package/dist/assets/{changes-olY8cnFK.js → changes-DZWHZguL.js} +1 -1
  32. package/dist/assets/client-BWV84wi2.js +2 -0
  33. package/dist/assets/client-DGrP-2AJ.css +1 -0
  34. package/dist/assets/conversation-B90ERX9h.js +17 -0
  35. package/dist/assets/conversation-vxJGwmtW.css +1 -0
  36. package/dist/assets/{dashboard-BnXD-H4R.js → dashboard-iREwhGqv.js} +1 -1
  37. package/dist/assets/definitions-CNu5E87y.js +1 -0
  38. package/dist/assets/{env-DJhnLOH7.css → env-BzRtyO0w.css} +1 -1
  39. package/dist/assets/env-D5KpTEw7.js +1 -0
  40. package/dist/assets/health-BJvooRnJ.css +1 -0
  41. package/dist/assets/health-BhoO1d4h.js +1 -0
  42. package/dist/assets/{history-BxlpB-YH.js → history-DVURy45X.js} +1 -1
  43. package/dist/assets/{incoming-BOxRVlOM.js → incoming-DzADFGqp.js} +1 -1
  44. package/dist/assets/index-GBRpNZLy.js +138 -0
  45. package/dist/assets/index-irlMYzLh.css +1 -0
  46. package/dist/assets/{integrations-BFltGDVI.js → integrations-Dy5jIiJ5.js} +2 -2
  47. package/dist/assets/issues-lh7R775d.js +1 -0
  48. package/dist/assets/learning-_O1PEaam.js +1 -0
  49. package/dist/assets/mdi-CG9pWOSj.js +1 -0
  50. package/dist/assets/placement-BF-zIEhA.js +1 -0
  51. package/dist/assets/pull-requests-ByE-Dvk7.js +1 -0
  52. package/dist/assets/{repository-JWLVST3D.js → repository-BUfUAyS9.js} +1 -1
  53. package/dist/assets/roboto-latin-wght-normal-ccAYIvAh.woff2 +0 -0
  54. package/dist/assets/{session-C5Nj8Dlq.js → session-BdhKrcX4.js} +1 -1
  55. package/dist/assets/settings-CzhIcn9K.js +1 -0
  56. package/dist/assets/shared-DpMvYJO3.js +2 -0
  57. package/dist/assets/studioGateApi-DcCqiD9V.js +1 -0
  58. package/dist/assets/studioUrls-DmMMIScP.js +1 -0
  59. package/dist/assets/useArchivedVibe64Sessions-CLHJOyeW.js +1 -0
  60. package/dist/assets/useCommand-Bqxb-naz.js +1 -0
  61. package/dist/assets/useEndpointResource-DWoQ2keu.js +1 -0
  62. package/dist/assets/useRealtimeEvent-Bwapstla.js +1 -0
  63. package/dist/assets/{useUiFeedback-0FqKuZRP.js → useUiFeedback-BPBF_0bp.js} +1 -1
  64. package/dist/assets/useVibe64ConversationLog-B4JgmxUf.js +1 -0
  65. package/dist/assets/useVibe64DatabaseTools-4o6S8eXq.js +1 -0
  66. package/dist/assets/useVibe64Learning-DyqXkpLw.js +1 -0
  67. package/dist/assets/useVibe64ProjectScope-Bp1ImZlz.js +1 -0
  68. package/dist/assets/useVibe64SessionData-YhhE_5pC.js +1 -0
  69. package/dist/assets/useVibe64SessionSelection-CuZCzAcY.js +1 -0
  70. package/dist/assets/useVibe64SystemGraph-B4RmsC9Y.js +1 -0
  71. package/dist/assets/{useVibe64Terminal-BPnN25WH.js → useVibe64Terminal-Cg3idMcy.js} +1 -1
  72. package/dist/assets/vibe64AssistantHost-CP6oxv5b.js +1 -0
  73. package/dist/assets/{vibe64SessionFocus-kqPOPaOH.js → vibe64SessionFocus-Cz5Vq1re.js} +1 -1
  74. package/dist/assets/{vibe64SessionInfo-BHxtTrLX.js → vibe64SessionInfo-BuBUdL-e.js} +1 -1
  75. package/dist/assets/{vibe64SessionPanelModel-BMf64fv7.js → vibe64SessionPanelModel-DDorOuiL.js} +1 -1
  76. package/dist/assets/{vibe64SessionToolDefinitions-NfLd1HZI.js → vibe64SessionToolDefinitions-BJaJH5LR.js} +1 -1
  77. package/dist/index.html +21 -20
  78. package/docs/colleague-usage/account-profile-and-appearance.md +8 -2
  79. package/docs/colleague-usage/ai-accounts-and-routing.md +127 -16
  80. package/docs/colleague-usage/ai-onboarding.md +229 -0
  81. package/docs/colleague-usage/coding-agent-goal-pause.md +5 -5
  82. package/docs/colleague-usage/coding-agents.md +21 -0
  83. package/docs/colleague-usage/colleague-watches.md +4 -23
  84. package/docs/colleague-usage/colleague.md +10 -2
  85. package/docs/colleague-usage/connected-projects.md +10 -2
  86. package/docs/colleague-usage/conversation-context.md +2 -0
  87. package/docs/colleague-usage/dashboard-navigation.md +19 -27
  88. package/docs/colleague-usage/database.md +6 -11
  89. package/docs/colleague-usage/development-copies.md +2 -1
  90. package/docs/colleague-usage/development-env.md +6 -0
  91. package/docs/colleague-usage/github-work.md +9 -0
  92. package/docs/colleague-usage/health-checks.md +11 -5
  93. package/docs/colleague-usage/integrations.md +3 -1
  94. package/docs/colleague-usage/learning-code-questions.md +23 -51
  95. package/docs/colleague-usage/learning-course-catalogue.md +8 -6
  96. package/docs/colleague-usage/learning-environment.md +337 -0
  97. package/docs/colleague-usage/learning-history.md +70 -101
  98. package/docs/colleague-usage/learning-mode-ui.md +129 -214
  99. package/docs/colleague-usage/learning-practice-projects.md +178 -78
  100. package/docs/colleague-usage/learning-teacher-guide.md +48 -26
  101. package/docs/colleague-usage/learning-with-colleague.md +195 -216
  102. package/docs/colleague-usage/lesson-authoring.md +41 -24
  103. package/docs/colleague-usage/lesson-step-bar.md +99 -0
  104. package/docs/colleague-usage/managed-app-access.md +7 -0
  105. package/docs/colleague-usage/message-delivery-recovery.md +7 -6
  106. package/docs/colleague-usage/preview-browser-checks.md +9 -1
  107. package/docs/colleague-usage/preview-starting-application.md +0 -1
  108. package/docs/colleague-usage/preview.md +12 -1
  109. package/docs/colleague-usage/project-messages.md +2 -2
  110. package/docs/colleague-usage/project-setup.md +9 -2
  111. package/docs/colleague-usage/running-vibe64-on-your-computer.md +61 -0
  112. package/docs/colleague-usage/sessions.md +25 -33
  113. package/docs/colleague-usage/teaching-content.md +14 -40
  114. package/docs/colleague-usage/temporary-chats.md +23 -2
  115. package/docs/colleague-usage/voice-chat.md +5 -10
  116. package/docs/colleague-usage/voice-face-and-speaking-voice.md +6 -8
  117. package/docs/colleague-usage/voice-recovery.md +3 -2
  118. package/docs/templates/learn-topic/README.md +6 -6
  119. package/docs/templates/learn-topic/training/lessons/TOPIC-01/lesson.json +28 -7
  120. package/docs/templates/learn-topic/training/lessons/TOPIC-01/notes.md +19 -0
  121. package/docs/templates/learn-topic/training/lessons/TOPIC-01/steps/check-understanding.md +3 -0
  122. package/docs/templates/learn-topic/training/lessons/TOPIC-01/steps/explain-idea.md +3 -0
  123. package/docs/templates/learn-topic/training/lessons/TOPIC-01/steps/try-it.md +3 -0
  124. package/docs/templates/learn-topic/training/outline.md +1 -1
  125. package/docs/training-content.md +319 -66
  126. package/node_modules/@jskit-ai/assistant-core/package.json +1 -1
  127. package/node_modules/@jskit-ai/assistant-runtime/package.json +1 -1
  128. package/node_modules/@jskit-ai/assistant-runtime/patterns/assistant-surface/PATTERN.md +3 -2
  129. package/node_modules/@jskit-ai/assistant-runtime/patterns/assistant-surface/example/integrations.json +3 -2
  130. package/node_modules/@jskit-ai/assistant-voice/package.json +1 -1
  131. package/node_modules/@jskit-ai/connectors-catalog/package.json +1 -1
  132. package/node_modules/@jskit-ai/connectors-catalog/patterns/ai-connections/PATTERN.md +4 -3
  133. package/node_modules/@jskit-ai/connectors-catalog/src/shared/ai-models.json +0 -1
  134. package/node_modules/@local/vibe64-accounts/package.json +1 -0
  135. package/node_modules/@local/vibe64-colleague/package.json +2 -1
  136. package/node_modules/@local/vibe64-core/package.json +3 -0
  137. package/node_modules/@local/vibe64-execution/package.json +1 -0
  138. package/node_modules/@local/vibe64-execution/src/host/execHelper.js +171 -174
  139. package/node_modules/@local/vibe64-execution/src/server/engines/stdioBridge.js +9 -9
  140. package/node_modules/@local/vibe64-execution/src/server/hostProfile.js +12 -0
  141. package/node_modules/@local/vibe64-genesis/README.md +10 -37
  142. package/node_modules/@local/vibe64-genesis/bin/vibe64-genesis-host-context +790 -779
  143. package/node_modules/@local/vibe64-genesis/package.json +1 -0
  144. package/node_modules/@local/vibe64-genesis/src/server/agentSpecs.js +255 -0
  145. package/node_modules/@local/vibe64-genesis/src/server/index.js +473 -450
  146. package/node_modules/@local/vibe64-genesis/src/server/promptContext.js +148 -148
  147. package/node_modules/@local/vibe64-project/package.json +2 -1
  148. package/node_modules/@local/vibe64-runtime/package.json +1 -2
  149. package/node_modules/@local/vibe64-runtime/src/server/codexAppServerProcess.js +526 -512
  150. package/node_modules/@local/vibe64-runtime/src/shared/assistantRoutingScores.json +0 -1
  151. package/node_modules/@local/vibe64-source-editor/package.json +1 -0
  152. package/node_modules/@local/vibe64-terminals/package.json +2 -0
  153. package/node_modules/@local/vibe64-terminals/src/server/opencodeSessionEnvironmentPlugin.js +129 -131
  154. package/node_modules/@local/vibe64-terminals/src/server/sessionWorkOperationCommand.js +1508 -1456
  155. package/node_modules/@local/vibe64-training/package.json +16 -27
  156. package/package.json +7 -7
  157. package/server.bundle.mjs +41339 -41635
  158. package/dist/assets/GithubBrowserTabs-DO5PHon-.js +0 -1
  159. package/dist/assets/GithubMarkdown-BQ6MfCDJ.js +0 -3
  160. package/dist/assets/GithubMarkdown-U7-j-qNI.css +0 -1
  161. package/dist/assets/Vibe64DashboardShell-CuCVMhOc.js +0 -1
  162. package/dist/assets/Vibe64OutputControls-DAAmA09l.js +0 -8
  163. package/dist/assets/Vibe64OutputControls-DPBsyDZM.css +0 -1
  164. package/dist/assets/Vibe64SessionFiles-B0u9HKdF.js +0 -107
  165. package/dist/assets/Vibe64SessionFiles-NjOMVwPR.css +0 -1
  166. package/dist/assets/_slug_-B31c15cc.css +0 -1
  167. package/dist/assets/_slug_-Dy35qLo1.js +0 -1
  168. package/dist/assets/app-DRXCcv05.css +0 -1
  169. package/dist/assets/app-zt7HwQKT.js +0 -1
  170. package/dist/assets/client-BrV4QPwG.js +0 -2
  171. package/dist/assets/client-C1bwIlu6.css +0 -1
  172. package/dist/assets/definitions-DaOPIkyB.js +0 -1
  173. package/dist/assets/env-DN0vW4EI.js +0 -1
  174. package/dist/assets/health-7oIQODer.css +0 -1
  175. package/dist/assets/health-Z6m96GDr.js +0 -1
  176. package/dist/assets/index-BUq-MczL.js +0 -86
  177. package/dist/assets/index-DtmBqE3h.css +0 -1
  178. package/dist/assets/issues-1iS5zoed.js +0 -1
  179. package/dist/assets/layout-BkWVNT37.js +0 -1
  180. package/dist/assets/mdi-C54lQ0i_.js +0 -1
  181. package/dist/assets/placement-DLsU3pCW.js +0 -1
  182. package/dist/assets/pull-requests-BJOwNL4k.js +0 -1
  183. package/dist/assets/settings-c273Ikrm.js +0 -1
  184. package/dist/assets/shared-YZb7ocaK.js +0 -2
  185. package/dist/assets/studioGateApi-DhA9IJGZ.js +0 -1
  186. package/dist/assets/studioUrls-Dj8rXeXO.js +0 -1
  187. package/dist/assets/useArchivedVibe64Sessions-CVZx2Rtm.js +0 -1
  188. package/dist/assets/useCommand-DWuxfAV0.js +0 -1
  189. package/dist/assets/useEndpointResource-MWVNfmMa.js +0 -1
  190. package/dist/assets/useVibe64ConversationLog-8cKh1eDm.js +0 -1
  191. package/dist/assets/useVibe64DatabaseTools-BcRG1s3i.js +0 -1
  192. package/dist/assets/useVibe64LearningMode-Bl0dGdCh.js +0 -28
  193. package/dist/assets/useVibe64LearningMode-C3PcXdVg.css +0 -1
  194. package/dist/assets/useVibe64ProjectScope-DOEVkBqX.js +0 -1
  195. package/dist/assets/useVibe64SessionData-DFTyLzci.js +0 -1
  196. package/dist/assets/useVibe64SessionSelection-j9lsllx4.js +0 -1
  197. package/dist/assets/useVibe64SystemGraph-tNkIwSBQ.js +0 -1
  198. package/dist/assets/vibe64AssistantHost-DdE_-lZF.js +0 -1
  199. package/dist/assets/vibe64LessonDashboard-DlKYjisq.js +0 -1
  200. package/dist/assets/vibe64ProjectScope.local-DqT6e5un.js +0 -1
  201. package/docs/colleague-usage/learning-chat-retention.md +0 -74
  202. package/docs/colleague-usage/learning-diagrams-and-voice.md +0 -97
  203. package/docs/colleague-usage/learning-lesson-watch.md +0 -95
  204. package/docs/colleague-usage/learning-native-session.md +0 -206
  205. package/docs/colleague-usage/learning-practical-exercises.md +0 -71
  206. package/docs/colleague-usage/learning-practical-gestures.md +0 -48
  207. package/docs/colleague-usage/learning-session-creation.md +0 -95
  208. package/docs/colleague-usage/lesson-practical-assessment.md +0 -54
  209. package/docs/colleague-usage/preview-lesson-presentation.md +0 -56
  210. package/docs/templates/learn-topic/training/lessons/TOPIC-01/lesson.md +0 -44
@@ -1,95 +0,0 @@
1
- # Watching a lesson step by step
2
-
3
- Colleague and the lesson teacher (Main) can show you places in a lesson, and
4
- Colleague can watch the steps you take; see also
5
- [Choosing lessons and Learning conversations](learning-mode-ui.md).
6
-
7
- You can ask Colleague to enter or leave Learning, show **Courses**, show the
8
- active lesson, or reveal the exact lesson project's normal **Preview** or
9
- **Dashboard → Database → ERD**. Main can reveal those same workspace views only
10
- for its bound active lesson, and can return to that lesson's Learning pane or
11
- open a visual declared by its pinned content.
12
-
13
- Main usually points you to these places instead of opening them; see
14
- **Learning teacher guide** (`learning-teacher-guide`). Both use the same initiating
15
- browser and wait for its actual settled mode, pane, session and attempt before
16
- reporting success. For a declared visual, confirmation follows the visual opening;
17
- the earlier Courses view is not its success receipt. This also applies when a
18
- saved lesson finishes loading after the chat first appears. If the lesson or
19
- visual changes while opening, the request is not confirmed; return to the intended
20
- saved lesson before requesting its visual again. On a phone, the request changes
21
- the same stacked panes; it
22
- does not open another app or conversation. Showing **Courses** does not start a
23
- lesson, leaving Learning does not end one, and any agent-opened view is a
24
- demonstration rather than evidence that you performed an assessed step.
25
-
26
- Use Colleague's eye button to manage polling for the lesson task currently open
27
- in this browser. If Main has delivered a lesson question, **Start polling** uses
28
- that exact question and pinned lesson, including its current practice project;
29
- you do not need to enter the project again. Otherwise, enter one bounded task in
30
- **Task to watch**, then start it. This also works for a lesson without a practice
31
- project, such as Lesson 0; its target then shows as a source-less lesson. The compact details dialog shows the task as
32
- **active**, **paused**, or **unavailable**, its exact target, and its latest
33
- structured observation and time, last delivered help, and any saved assessment
34
- outcome. Observations include switching between the practice project's
35
- **Preview**/**Dashboard** and the graduation-cap **Learning** option, and between project panes such
36
- as **Preview**, **Dashboard → Database** and **Dashboard → Files**;
37
- a view opened by Main or Colleague is recorded as their demonstration, not your step.
38
- The watch also notices when something you do inside the practice app fails: if
39
- you click or submit in the visible **Preview** (for example **Add note**) and the
40
- app's data-changing request then fails, the watch records **app-request** with
41
- only its method, a path the lesson declared (otherwise `other`), the HTTP status
42
- and a failure code (`http-4xx`, `http-5xx` or `network`). Main may then offer one
43
- hint; at most one such hint is offered every 30 seconds, and the same failure
44
- gets only one. Successful app requests, requests the app makes by itself, and
45
- anything while Preview is hidden (including behind the phone Colleague overlay)
46
- are not reported. This is the app's own claim, so it never grades or completes. Expand **Task criteria** below the watch controls to read the full
47
- criteria; long criteria stay collapsed so **Pause**, **Resume** and **Stop** remain
48
- easy to reach. You can instead tell Colleague “Watch me while I do this”; that direct
49
- request starts the same watch and the eye dialog shows the same state. Asking how
50
- polling works only gets an explanation. Ask Colleague to list, pause, resume or
51
- stop a watch when you do not want to use the buttons. **Pause** retains the cursor,
52
- **Resume** rechecks the current learner, lesson and browser before continuing,
53
- and **Stop** removes only the watch—it does not stop the app, Main or the lesson.
54
- Returning to another project, lesson or account pauses the old watch;
55
- after a server restart, return to the same Learning task and choose **Resume**.
56
- If you leave the task while **Start polling**, **Resume**, or an observed step
57
- is being checked, that request reports the changed task instead of activating
58
- the departed watch or queuing help for it. Return to the intended task before
59
- starting or resuming; repeat a step only after its watch is active.
60
- Polling follows the exact saved attempt, including an authorized author trial; it does not substitute the ordinary course progress for that task.
61
- If the lesson can no longer be read or access is lost, polling becomes
62
- **unavailable** and discards help that has not been delivered. After resolving
63
- the problem, **Resume** watches fresh steps; it does not replay that discarded help.
64
- Closing the initiating tab or losing its live connection pauses that tab's watch
65
- and discards pending help. Watches in other tabs keep their own state. Reconnecting
66
- registers your current view but leaves the watch paused: return to the intended
67
- task and choose **Resume**. Minimizing Colleague keeps the same connected task.
68
- Replacing or closing the watched Main conversation also pauses its old watch,
69
- even when the project and lesson remain selected. Switching only between that
70
- task's project panes and its Learning tab keeps polling active.
71
- After an application update, reload the page before starting or resuming polling.
72
- Start and Resume require the initiating browser's live connection. If it has not
73
- connected yet, wait for it to reconnect and then choose the control again; saved
74
- focus alone cannot start a detached watcher.
75
- The saved assessment outcome supports the watched outcome only when it is a pass
76
- for that task's referenced assessment. A pass from another assessment does not
77
- complete your task. A task you describe in your own words has no automatic
78
- assessment match; polling and help do not grade it.
79
- You do not need to keep the dialog open.
80
- When a watched step reaches the lesson teacher, Main's chat shows a short status
81
- line such as “Watching: you are in Preview.” followed by the teacher's
82
- reply. The teacher still receives the full observation; its internal prompt is
83
- not shown as a chat message. A failed step shows “Watching: that step did not
84
- finish.”; choosing the graduation-cap **Learning** option shows “Watching: you are in the Learning pane.”
85
-
86
- Polling reports only named Vibe64 controls, the settled project-or-Learning view,
87
- saved lesson progress and the reduced failed app request described above. It
88
- never sends typed text, form values, request or response bodies, headers, query
89
- strings, arbitrary page content, screenshots, secrets or another project. Navigation performed by Colleague is
90
- reported as a demonstration, not as something you did and not as assessment
91
- evidence. Polling does not grade a question or mark a lesson complete.
92
- Only a saved assessment outcome supports completion; a recent observation or a
93
- delivered-help receipt does not. Colleague cannot observe arbitrary activity
94
- inside the supervised application unless that interaction is one of the named
95
- Vibe64 controls or the declared exercise-response bridge.
@@ -1,206 +0,0 @@
1
- # Main lesson conversations
2
-
3
- Use the yellow **L** plate and the existing **Courses** pane to Start or Resume
4
- your saved lesson attempt. The same left Main conversation is the intended
5
- teacher; Colleague remains available for general application assistance. See
6
- [Choosing lessons and Learning conversations](learning-mode-ui.md) for the
7
- picker, chat and desktop/mobile view controls. Opening the conversation does
8
- not send a teaching request or prove that its teaching tools are available.
9
- An empty Learning chat invites you to ask Main to teach the saved lesson, one
10
- step at a time. This welcome is a prompt to you, not a delivered lesson question.
11
-
12
- New Learning conversations start in **Junior** mode, using that workflow's
13
- configured Junior model. You can choose **Senior**, **Junior** or **Custom**
14
- through the existing **Chat mode** controls; **Custom** lets you choose an
15
- available orchestrator, model and thinking level. Resume keeps your saved choice.
16
- This applies to lessons with or without a practice exercise. Working conversations
17
- keep their existing starting mode, and a missing Junior connection must be
18
- configured through the normal AI Accounts and Model routing controls.
19
-
20
- A lesson without a practice exercise retains its conversation and history under
21
- your exact saved attempt. It creates no practice project, uses no practice
22
- database slot and has no source changes to Save or Git recovery checkpoint.
23
- Finishing a teaching turn does not start workspace setup for this kind of lesson.
24
- Resume the confirmed attempt after an interruption. Do not create a substitute
25
- workspace or reset its progress to hide a preparation failure.
26
-
27
- Opening or resuming this source-less lesson with Codex reads its saved private
28
- conversation; it does not require a practice project. Keep that same attempt
29
- when changing its supported AI connection. After an allowed assistant change,
30
- chat updates follow the newly selected assistant in that same conversation.
31
- Loaded older messages and unsent text stay available; changing the selection
32
- does not send a message. This also applies when another open view changes the
33
- selection. If updates fail, use the existing chat Reload recovery. If reading the conversation fails,
34
- retain the lesson and report the error instead of creating project source.
35
-
36
- Codex, OpenCode and Claude Main can use the lesson teaching tools supplied by
37
- your installation. Claude needs the installation’s supported native application
38
- tool connection; an ordinary CLI reply alone does not confirm a teaching action. If those tools are
39
- unavailable, keep the saved attempt and conversation, check the selected AI
40
- account, and report the exact error before retrying. If a provider cannot use these tools, keep the conversation and ask the installation owner to check its lesson support. Changing workflows
41
- or sending ordinary chat does not enable missing teaching, grading or presentation
42
- capabilities; do not reset progress or create a substitute workspace to hide the
43
- failure.
44
-
45
- In a supported teacher conversation, ask Main to teach the retained lesson. It
46
- can read your current learning state and pinned teaching brief, prepare a short
47
- question and evaluate your accepted answer. A prepared question becomes delivered
48
- only when Main's completed final answer exactly matches it. Progress is never
49
- a pass merely because the teacher says so. Evaluation uses the configured
50
- tool-free Helper and the lesson's original pinned rubric and progress rules.
51
- Practical gestures and diagram narration are separate capabilities; these four
52
- tools do not establish them.
53
-
54
- Codex, OpenCode and supported Claude connections can confirm a narrated diagram
55
- through their own exact completed native response. Keep the initiating browser
56
- and retained lesson conversation open. When Main uses that cue, follow
57
- its completed explanation and the matching diagram step. A partial reply or a
58
- stopped turn does not confirm that cue. If narration cannot be confirmed, keep
59
- the saved attempt and read the error before retrying; ordinary chat text cannot
60
- replace the confirmed explanation or turn a diagram step into a lesson pass.
61
- An older saved answer cannot confirm a new narration. Keep the current saved
62
- attempt if the selected connection reports that final-response confirmation is
63
- unavailable, and ask the installation owner to check its supported lesson tools.
64
-
65
- Reading or reopening the same retained lesson conversation preserves its connected
66
- lesson state; sending your explanation uses that same state. Genuine conversation
67
- replacement or a retired connection requires fresh lesson recovery.
68
- Keep the same saved lesson and Main open while chat and diagram updates arrive.
69
- Updates still require your current account and access to that lesson. If access
70
- ends, retain the attempt and resolve the access error before using the existing
71
- chat **Reload** recovery. Reload does not resend an admitted request or turn an
72
- unsuccessful diagram action into a completed one.
73
-
74
- Reply to the question actually shown in that conversation. Typed input captures
75
- its current question; voice input captures it when recording begins. Retrying an
76
- uncertain Send keeps the original message identity and exact words. A stale or
77
- missing question association leaves the words in chat without treating them as
78
- an answer to a newer question. An unconfirmed question or grade is not a pass:
79
- read the retained result before asking for another evaluation.
80
- Main receives the exact accepted answer identity with its captured question; you
81
- do not need to copy message IDs or move an answer to another conversation. If an
82
- evaluation says the answer is not admitted, retain the same lesson and report the
83
- error. Guessing an ID, using an older answer or asking for a pass cannot replace
84
- the current accepted answer.
85
-
86
- Teaching requires current write access to the exact learner, attempt and pinned
87
- lesson. Historical chat access does not permit a new evaluation. If your account,
88
- access, attempt or teaching turn changes during a check, the save is refused.
89
- Stop also refuses a pending question, checkpoint or assessment save. Keep the
90
- attempt and retry from a current authorized turn after reading its saved state.
91
- A saved receipt requires current access to replay; it cannot authorize new work.
92
-
93
- Stopping or closing the conversation stops its admitted work without stopping a
94
- peer sharing the AI connection. Closing and ended attempts retain history but
95
- accept no new teaching. Resume the confirmed active attempt or explicitly start
96
- a new one. A delayed completion remains attached to its own attempt when you
97
- switch to Working; it does not change the selected Working project.
98
-
99
- If the AI connection is unavailable, retain the attempt and resolve that
100
- preparation failure before retrying. If Main reports that lesson instructions
101
- could not be loaded, keep the saved attempt, source and history, and report the
102
- exact error to the installation owner. Resolve that installation failure before
103
- sending another teaching request. If a retained conversation
104
- reports different application tool entry points, ask the installation owner to
105
- resolve its supported recovery. Do not erase history or recreate the conversation
106
- to bypass the mismatch. An unconfirmed Helper cleanup must be resolved before
107
- another evaluation. Colleague can explain recovery and offer supported actions;
108
- private connection-key entry remains a human-only step.
109
-
110
- Practice lessons require their real prepared workspace and retain the ordinary
111
- source-availability checks and Git recovery checkpoints. A checkpoint failure
112
- is a workspace recovery problem; it does not prove a lesson pass or authorize
113
- another teaching request. Source-less lessons retain their no-Git result.
114
- Practice teaching-tool availability remains subject to the limits above.
115
- OpenCode uses the same lesson teaching controls for a prepared practice lesson
116
- as for a lesson without an exercise. Having practice source does not grant Main
117
- ordinary coding or shell tools. If a teaching tool reports no authorization,
118
- keep the saved attempt, source and history, and report the exact error to the
119
- installation owner before continuing.
120
- Sending in a prepared practice conversation checks fresh teaching access without
121
- starting setup again. Its installed lesson and exercise are checked together
122
- for that access read; this does not retain permission for a later request. A changed
123
- lesson pin or installed exercise remains an error, and historical reading does
124
- not permit new practice work. A confirmed preparation refusal before admission keeps the
125
- message failed; after preparation is ready, use its **Retry** once to send the same
126
- saved request. If delivery is unconfirmed, use **Retry**; an unknown result
127
- is not permission to resend. The lesson normally becomes ready by itself when
128
- setup finishes. If setup has finished but the lesson still shows preparing, use
129
- **Resume saved lesson** (or **Continue** on its course) to confirm its
130
- preparation; do not start a replacement or change its pin.
131
- If preparation reports
132
- missing source, retain the attempt and resolve that failure before continuing;
133
- a conversation alone cannot replace the workspace. Existing conversations and
134
- progress remain unchanged.
135
-
136
-
137
- If an older prepared practice lesson reports that its Learning binding does not
138
- match the saved attempt, keep its original session, workspace and progress. Ask
139
- the installation owner to finish the candidate's stopped-service practice-history
140
- upgrade, then Resume the same saved lesson. This is an operator step; Colleague
141
- can explain the error but cannot run a state upgrade. The upgrade retains the
142
- original conversation and source and changes only the preparation-owned initial
143
- session's Learning association. Other Working sessions are left alone.
144
-
145
- A missing prepared session, conflicting ownership or unfinished archive/renewal
146
- requires the owner's specific recovery before upgrading. Do not create a
147
- replacement, delete history or change the lesson pin to bypass it. Finishing
148
- the upgrade does not complete Workspace setup or prove a lesson pass. If native
149
- tool compatibility is then refused, retain the same history and use the
150
- installation's supported connection/replacement recovery.
151
-
152
-
153
- ## A prepared practice lesson
154
-
155
- Start or resume the saved lesson in **Courses**. Its Learning conversation opens
156
- by itself once the request is confirmed; otherwise select it in the same session
157
- list. Ask Main to teach that lesson. The
158
- conversation belongs to the lesson’s prepared workspace; changing the visible
159
- Working project does not move it. Keep the existing attempt and history if its
160
- source is unavailable, and ask the owner to restore that saved workspace.
161
-
162
- Main can use a declared lesson diagram in **Presentation** when the installation
163
- supports it. **Courses** returns to the Courses pane; **Presentation** returns to the same
164
- diagram. A confirmed diagram state is retained separately from an assessment pass.
165
- On a phone, use the existing conversation and Preview view controls to switch
166
- between the teacher and diagram.
167
-
168
- Choose **App** in Preview to open this lesson's saved practice runtime before
169
- its controls appear. This keeps its existing conversation and source; it does
170
- not send a teacher message or start an output. If opening is refused, keep the
171
- lesson and choose **App** again after resolving the reported error. **Run** starts its
172
- declared output; **Restart preview** or **Restart** restarts that same output when
173
- shown. **Show run output** opens its log. Stop in that log stops the app without
174
- stopping Main or deleting the log; closing the log only hides it. The practice
175
- console is read-only. On a phone, closing its full-screen log returns to the
176
- underlying view.
177
-
178
- The App remains attached to this lesson's saved workspace when you select another
179
- Working project. **Courses** returns to the Courses pane and **Presentation** returns
180
- to the lesson diagram. A visible app or successful Run does not by itself confirm
181
- a practical or pass an assessment; follow Main's actual practical instructions.
182
-
183
- If setup, source, account access or resource admission refuses the run, retain the
184
- lesson and workspace and read the exact error. Use **Recheck setup** for a setup
185
- read failure; ask the installation owner to restore missing source, configuration
186
- or resources. This Learning view does not expose Env changes, starter replacement,
187
- Save, manual command terminals or Workspace setup retry. Do not substitute a
188
- Working conversation to bypass the refusal. Colleague can explain the controls
189
- and help you recover; Main remains the lesson teacher.
190
-
191
- The App setup view retains the same lesson presentation handle and saved lesson identity. Switching between App, Courses and Presentation does not switch to a working project. A changed account or saved lesson target retires that view; open the current Learning session again.
192
-
193
- An accepted Claude teacher request keeps its own saved lesson, conversation and
194
- account while its answer continues, including after the Send request returns.
195
- New teaching actions still check that saved attempt’s current access. If access
196
- changes or the stream fails, retain the existing message and inspect the error;
197
- do not send the same request again merely because the answer stopped updating.
198
- If the lesson checkpoint refuses after native cleanup is verified, the request
199
- shows an interruption with that error. It does not remain active or claim a
200
- successful teaching answer. Read the saved lesson again before a new request.
201
-
202
- When Claude finishes a prepared lesson question, delivery is confirmed from that
203
- request's exact completed native final and the saved final message. A brief
204
- progress reply does not replace the question, and preparing a question alone
205
- does not mark it delivered or passed. Changed access, account, teacher selection
206
- or a later accepted message cannot attach an old final to the current question.
@@ -1,71 +0,0 @@
1
- # Practise workspace controls and the application
2
-
3
- For the workspace exercise, keep the same question open while you use the
4
- controls yourself: open the project selector and choose the lesson's exercise
5
- (the already selected project also counts), reveal its Main coding conversation
6
- with the session tab or **Show chat**, then choose **Preview**. A different session
7
- or temporary review conversation does not count; use its **Main chat** button
8
- first. Wait for each view to finish opening.
9
- Colleague can explain these steps, but its own navigation is a demonstration,
10
- not evidence that you performed them.
11
- For a question that asks you to change code, edit in **Dashboard → Files** and
12
- press **Check my code** in the graduation-cap **Learning** option; see
13
- [Answering a code question in a lesson](learning-code-questions.md).
14
-
15
- Keep one delivered challenge and its question reference across all three steps.
16
- The Main teacher may explain one substep at a time, but must not prepare a new question
17
- between project selection, revealing its Main chat and Preview selection:
18
- that replaces the challenge and resets its observation collection. On a phone,
19
- receive the task before minimising Colleague; return after the steps and explain
20
- what you did before assessment. The supported Main practical owner must acknowledge the actual accepted steps
21
- and coach the next move; ordinary Colleague chat is not a grading path.
22
- These collecting facts are not a completed observation or pass. Only the final
23
- native step supplies `trainingPractical` for assessment.
24
-
25
- For the return exercise, **Minimize conversation**, use the workspace, then
26
- restore Colleague with its launcher. On phones, **Show project** / **Show chat**
27
- toggle workspace / Main, not Colleague. Desktop drawer and phone full-screen retain
28
- the session, speech, draft and exercise. Restore Colleague's actual body; another
29
- assistant's voice panel does not count.
30
-
31
- Native observation binds your clicked control and settled view to the delivered
32
- question; it has no pass button. Unsupported observation leaves the practical
33
- incomplete. If unconfirmed, repeat the step once ready; the workspace action was
34
- not undone. Reload or question replacement may require repeating an unfinished
35
- sequence. Separate verified assessment uses the pinned rubric and your explanation.
36
-
37
- Observation retries retain the original gesture acknowledgement/step count;
38
- conflicting details are rejected. Completion is an observation, not a pass.
39
- After server restart repeat the sequence; workspace actions were not undone.
40
- The question itself stays open across a restart or reload, so you repeat its
41
- steps (or press **Check my code** again) without asking for a new question.
42
- Demonstration/substantial help remains teacher-origin, not independent evidence.
43
-
44
- Practical assessment requires both your native exercise receipt and accepted
45
- explanation, never Main's substitute description. Demonstrations and failed
46
- declared checks cannot earn a pass. Retry reads the saved result; another submission
47
- cannot reuse the observation. Assessment is not a learner grading button or proof
48
- of lesson completion.
49
-
50
- ### Trying the real application
51
-
52
- For the application practical, show **App preview**, press the application's
53
- **Ask the server** button yourself, and read its greeting and request reference.
54
- If the diagram is showing, switch back to App preview first. On a phone,
55
- minimise Colleague so the real App is visible. Tell the Main teacher in ordinary words
56
- what you pressed and what replied; a verified request alone does not replace
57
- this explanation.
58
-
59
- The lesson checks the visible App frame and real server response. Diagrams,
60
- demonstrations, readiness signals and background responses are insufficient.
61
- If App was hidden, the question changed or observation was unconfirmed, show the
62
- same exercise and press again. After server restart, use **Reload preview** before
63
- pressing. Original App/Preview controls remain; Colleague gets no source or screenshots.
64
-
65
- Colleague can read the completed observation's exact identity through its normal
66
- context query, then evaluate it with your accepted explanation. Missing or stale
67
- observations require repeating the native task. A check reporting a verified
68
- interaction is not itself a rubric pass, and demonstrated steps remain labelled
69
- as demonstrated.
70
-
71
- An assessment error does not prove a Helper setup problem. Keep the attempt and question; inspect the actual cause. After admission recovery, give a fresh answer to the current question; old messages stay unchanged.
@@ -1,48 +0,0 @@
1
- # Practical lesson steps in Learning mode
2
-
3
- Main is the teacher in the selected saved lesson conversation. Colleague remains the general companion in its separate drawer. A passed practical step needs the real workspace action and your explanation to Main; neither starting a lesson nor a diagram alone counts as the action.
4
-
5
- ## Choose the saved practice project and chat
6
-
7
- Turn on **Learning mode** with the **L** button at the left of the header (full yellow while Learning is on). Start or resume the lesson through Courses, then use **Practice project** to choose its already prepared saved workspace. This menu lists saved practice targets available to your current learner; it does not install or create another project. A source-less introductory lesson has no practice project entry.
8
-
9
- Follow Main's current practical question. Choose the requested practice project yourself, then choose its saved Main session. Main stays visible in Learning mode. Press **App** in Preview when the question asks for the running application. These person clicks retain the selected saved lesson target. Automatic selection after Start or Resume does not count as an independent project-choice step. Answer Main after the actions; do not submit an explanation to Colleague instead. If you reload the page or return to a loaded lesson, wait for the current question and saved workspace to be ready, then carry out all its steps in that browser before sending your explanation.
10
-
11
- ## Try the application
12
-
13
- Wait for the actual App to load. Press **Ask the server** in the application itself and wait for **Hello from the server!** to appear. The displayed reply must belong to that button press in that live Preview frame. Reloaded frames, hidden frames, a failed request, copied text or a diagram do not count. On a phone, keep the App visible and the Colleague body hidden while pressing the application's button. Then return to Main and explain what happened.
14
-
15
- ## Hide and return to Colleague
16
-
17
- For the return-to-Colleague question, minimize the actual Colleague drawer, use the requested workspace control while it is hidden, then restore the same drawer and answer Main. Collapsing Main's chat is not minimizing Colleague. Desktop retains a narrow right drawer; on a phone the Colleague body is full screen or hidden with its launcher available.
18
-
19
- Do not start a fresh Colleague conversation midway through this question. If Colleague changed, ask Main to repeat the question and carry out its steps again. Missing or temporarily loading question data does not create a new question or reset the previous drawer identity.
20
-
21
- ## Recovery and limits
22
-
23
- A practical observation can fail while your workspace action remains applied. Repeat that step when the saved session and Preview are ready; do not assume the action was undone. If the learner, lesson target, frame or question changed, return to the intended saved lesson and follow Main's current question. A synthetic click, automatic navigation or an old reply is not practical evidence.
24
-
25
- If you started polling from Colleague's eye button, the same trusted named click
26
- can also update that watch after the workspace settles. The watch update and the
27
- native practical receipt are separate: a watch notification is never practical
28
- evidence, and a watch-delivery failure does not undo or invalidate a confirmed
29
- native practical receipt. Colleague-performed navigation is labelled as a
30
- demonstration. Pause or Stop polling independently of Main's current question.
31
- When a watched step is confirmed—or its settle/response fails explicitly—the
32
- watch may notify the same Main teacher after any current learner turn finishes.
33
- Main can acknowledge meaningful progress or offer one bounded hint, but that
34
- application update is not your answer or practical evidence. Repeating the same
35
- unchanged step does not create repeated hints, and inactivity creates none.
36
- The eye dialog and Colleague's start/read/pause/resume/stop requests control this
37
- same watch. Its timestamps describe freshness, and its saved assessment outcome
38
- is the only displayed result that can support lesson completion. Stop never stops
39
- the app or Main. Actions inside the app that do not cross a declared exercise
40
- response or named Vibe64 control cannot be observed by this polling mode.
41
-
42
- The teacher must genuinely finish delivering the question before practical observations can be accepted. A short preparation reply is not the question. Wait for Main’s full question even when it appears as a later reply in the same request. The original server checks the saved lesson pin, native delivery, declared check and your explanation; these controls do not mark a pass themselves. An unavailable exercise or teacher operation must be reported as unavailable instead of granting credit.
43
-
44
- Main grades your actual explanation alongside the server's description of your completed practical actions. The Helper checks both against the saved lesson rubric; it cannot perform missing steps for you. A saved **needs-review** result grants no pass. Ask Main about the missing evidence and use a fresh independent question when reassessment is appropriate; retrying a completed submission does not grade it again.
45
-
46
- Main rechecks your current access to the saved lesson when it uses a teaching tool, including after Send has returned. If access or the lesson target changed, wait for the reported result and return to the intended saved lesson before asking Main to continue.
47
-
48
- Standalone Vibe64 uses its local learner/display scope and the original Colleague component. Hosted Vibe64 uses the signed-in person's authenticated scope. Local routed Colleague navigation is unavailable unless its composing host supplies the original navigation adapter; manual controls and supported server actions remain distinct. Voice is optional and does not replace the practical controls or your explanation.
@@ -1,95 +0,0 @@
1
- # Opening a saved learning conversation
2
-
3
- On an installation that supports Learning mode, opening a lesson conversation
4
- uses your exact saved lesson attempt and your authorized AI connection. Reopening
5
- that attempt retains the same conversation and history. It does not create a
6
- practice project for a lesson without an exercise, reset progress or send a
7
- message to the teacher merely by opening the conversation.
8
-
9
- If opening fails after a connection or page-update error, inspect the saved
10
- attempt before retrying. An uncertain result can already have created its
11
- conversation; reopening the same attempt checks that record before creation.
12
- If the lesson has ended or its active progress is not confirmed, resolve that
13
- state before opening new work. Retained history remains separately readable.
14
-
15
- Colleague can explain this recovery and offer supported lesson operations. It
16
- must not substitute a new project, a different lesson attempt or another person's
17
- conversation. A missing connection or missing lesson support is a real error.
18
-
19
- A supported learning conversation can inspect its history, available authorized
20
- AI choices and connection access, change its selection, send or steer a message,
21
- rename the conversation and stop its own work. A lesson conversation without a
22
- practice project does not gain project Git, setup or repository operations. Those
23
- require their actual working or exercise project and its normal permissions.
24
-
25
- Selecting or clearing a supported learning conversation changes only that saved
26
- attempt's selection. It leaves your working project's selected conversation
27
- unchanged. Reopening the same attempt can recover its saved selection. Selecting
28
- history does not resume an ended lesson or send a message. Use the supported
29
- lesson start or resume operation before requesting new teaching work.
30
-
31
- Page updates for a supported learning conversation belong to that exact lesson
32
- attempt. They do not change the working project or indicate that a different
33
- lesson has completed. If updates stop, check this same saved conversation before
34
- retrying a message; a refresh is not permission to send the message again.
35
-
36
- Start and resume lessons from Learning → **Courses**; see
37
- [Choosing lessons and Learning conversations](learning-mode-ui.md). Opening a
38
- conversation does not establish successful question delivery, assessment, speech
39
- or presentation. An internal operation name is not a visible button.
40
-
41
-
42
- ## Local editor availability
43
-
44
- The local editor uses the OS account running it for saved lessons. Open it through
45
- its supported localhost connection; typing another name or account into a request
46
- does not change lesson ownership. Ordinary Working and Colleague conversations
47
- keep their existing history and preferences. Text lessons need no speech service.
48
-
49
- The owner must first install and enable a reviewed course release using the
50
- existing operator commands. An empty course list is not a broken conversation and
51
- does not authorize installing arbitrary content. Starting or resuming a lesson
52
- uses the same saved attempt and revision rules as hosted Vibe64. Retrying an
53
- uncertain start keeps its request and content choice; it does not reset progress.
54
-
55
- A practice lesson keeps its own reserved workspace and initial conversation.
56
- Reopening uses that saved conversation; it does not create an alternative source
57
- or bypass Workspace setup. If preparation is unavailable, keep the attempt and
58
- ask the installation owner for support. If an older prepared conversation cannot
59
- confirm its lesson binding, keep its source and history intact and ask the owner
60
- to restore supported access. Resuming does not silently convert old work or reset
61
- progress. Ending the attempt requires an explicit request and retains history.
62
-
63
- ## Saved conversations
64
-
65
- Supported Learning controls can show your already-created lesson conversations
66
- with the existing session choices. Reading this list does not start a conversation
67
- or send a message. A saved lesson attempt without a conversation has no session
68
- entry yet. Ended attempts can retain readable conversation summaries; reading
69
- those summaries does not resume teaching or change progress.
70
-
71
- If the list cannot verify a saved conversation's lesson or ownership, keep the
72
- last confirmed list and ask the owner to inspect that exact attempt. Do not assume
73
- the conversation is missing or create a replacement merely because the read
74
- failed. The read addition alone does not establish that every installation has
75
- completed its visible Learning filter or teacher controls.
76
-
77
-
78
- ## Main chat transport
79
-
80
- A supported Learning Main chat uses your actual saved attempt and authorized
81
- conversation, including its original Send, steering, Stop and goal behavior.
82
- Its own learner identity comes from the signed-in API. It does not use a fake
83
- project or change your Working or Colleague history. Merely hiding the original
84
- session with the mode filter retains its conversation and draft. Changing account
85
- or the exact lesson attempt blocks further work on the old captured target;
86
- an already-submitted message is not resent to the newly selected conversation.
87
-
88
- Learning chat updates belong to the exact attempt. Updates for another lesson or
89
- working project cannot enable its access, change activity or refresh its goal.
90
- If updates or access are unavailable, check the same saved attempt before
91
- retrying; refresh never proves failure or authorizes repeating a message. The
92
- same transport applies on desktop and mobile. An open chat alone does not prove
93
- actual teaching, speech or visuals.
94
- Colleague can explain the supported controls and offer the original actions; an
95
- offer does not authorize a new lesson or reset progress.
@@ -1,54 +0,0 @@
1
- # Practical steps and saved lesson results
2
-
3
- A practical lesson asks you to carry out an actual task in its prepared project
4
- and explain what happened. Main is the lesson teacher. Colleague can help you
5
- find the lesson, explain supported controls and coordinate authoring, but cannot
6
- ask or grade the teacher's questions on Main's behalf.
7
-
8
- Wait for Main's practical question before doing its steps. Use that saved lesson's
9
- actual exercise project and Main session. Starting or resuming a lesson,
10
- automatically showing a project, or an assistant opening a view for you does not
11
- count as an independent project-selection action. If the installation does not
12
- provide the necessary practical controls, report that limit; do not substitute
13
- another project, pretend a control worked or mark the task passed.
14
-
15
- For the introduction's workspace practical, select the prepared exercise project,
16
- then reveal its exact Main chat through its session tab or **Show chat**, then
17
- open its visible **Preview**. For the return practical, minimize the real
18
- **Colleague** drawer, use the requested workspace control while its body is
19
- hidden, then restore that same Colleague. Hiding Main is a different action.
20
- On a narrow screen, wait for the requested chat or Preview to be the actual
21
- visible view; a hidden pane does not count.
22
-
23
- For the App practical, use the real ready App in Preview. Press its native button
24
- and observe its identified server response, then explain that response to Main.
25
- A diagram, an output label, a claimed response or a supplied screenshot is not
26
- the App interaction. Main's observation uses the existing actual App run and
27
- installed check; the learner cannot choose a terminal, command, origin or pass.
28
-
29
- Keep using the same lesson conversation and browser while collecting its steps.
30
- If Main reports accepted partial steps, continue the remaining steps in their
31
- original order. Those facts help coaching; they are not evidence of a completed
32
- task or a saved pass. After the completed observation, send your explanation to
33
- Main in the same conversation. Main uses the actual accepted words, the exact
34
- question and that browser's observation, with the lesson's pinned rubric.
35
- A teacher demonstration or substantial assistance calls for independent follow-up.
36
-
37
- Read the saved lesson result before advancing. A check outcome alone is not an
38
- assessment pass. If grading is interrupted, unavailable or uncertain, retain the
39
- same submission identity and inspect saved progress before retrying. Do not run
40
- another inference or repeat an unknown App effect to manufacture success.
41
-
42
- A server restart or retired connection can lose unfinished native-step collection;
43
- it does not undo your workspace action. Explain that clearly and repeat the
44
- practical only when collection is genuinely unavailable. The delivered question
45
- itself is saved and stays open: missing collected facts after a restart mean
46
- "press or repeat again", never "issue the question again". Previously confirmed
47
- passes remain in the original saved progress. A new question needs its own real
48
- steps; an older observation cannot be reused for it. Closing a view or minimizing
49
- a drawer is not permission to replace the saved lesson or silently send a message.
50
-
51
- Changing assistants or closing a lesson session retires unfinished practical
52
- collection through the same session cleanup. Confirmed results and chat history
53
- remain saved. If stopping or Helper cleanup cannot be confirmed, retry that
54
- operation before starting another assessment; do not assume cleanup succeeded.
@@ -1,56 +0,0 @@
1
- # Lesson presentation in Preview
2
-
3
- This continues [Previewing a web application](preview.md); for diagrams and voice in lessons see also [Lesson diagrams and voice](learning-diagrams-and-voice.md).
4
-
5
- When a host opens a declared lesson diagram, Preview offers **App preview** and
6
- **Colleague presentation**. App preview returns to the running application;
7
- Colleague presentation shows the same retained diagram. Switching changes neither
8
- the application process nor its frame. **Minimise presentation** returns to the
9
- application while retaining the diagram; **Restore presentation** brings it back.
10
- On phones, return to the workspace from Colleague to use these same Preview choices.
11
-
12
- The host reads your pinned diagram for your signed-in lesson attempt even while
13
- its exercise project is selected. You need not leave the project to load it. If
14
- loading fails, use **Reload presentation** for the same attempt; do not start a
15
- new lesson or treat the failure as an assessment result.
16
-
17
- Hiding a diagram pauses its motion when its declared controller supports pause.
18
- Showing it does not replay a transition automatically. A diagram failure offers
19
- **Reload diagram**; a failed resource read offers **Reload presentation**, which
20
- reads the same attempt and declared visual again. Neither recovery grades an
21
- assessment or changes the lesson version. Missing or changed pinned content needs
22
- the owner's normal recovery. Colleague's visual commands become available only
23
- when the host supplies authenticated resource delivery and browser acknowledgement;
24
- this Preview composition alone does not activate those tools or synchronise speech.
25
-
26
- With the authenticated host connected, you can ask Colleague to show a declared
27
- lesson visual or demonstrate its next step. It uses your saved prepared exercise
28
- and waits for the diagram to be ready or the transition to finish. Ask it to read
29
- the displayed diagram state if you are unsure. If the browser disconnects or the
30
- exercise view changes, reopen the same lesson and retry deliberately; a missing
31
- acknowledgement is not proof the transition failed, so keep the original command
32
- identity on a retry. These commands do not mark learner work correct or prove
33
- spoken narration finished.
34
-
35
- ## Diagram explanations and sound
36
-
37
- A host-enabled teaching cue first shows the declared diagram, then uses one final
38
- Colleague explanation. Its motion starts when that explanation actually becomes
39
- audible. Tool progress is not narration. With spoken replies off, read the final
40
- explanation and press **Continue** to watch. If sound has not started, **Play diagram
41
- without sound** is an explicit alternative; sound failure also offers Continue.
42
- Neither option pretends that audio played.
43
-
44
- Hiding Preview, changing the exercise, reloading its diagram or stopping the
45
- explanation retires the current cue. Supported motion pauses and its semantic
46
- state remains readable; showing Preview alone does not replay it. Deliberately
47
- hiding the diagram interrupts sound only while this cue's exact explanation is
48
- still audible. The normal voice stop also clears queued speech for that same
49
- voice binding; it does not pause audio for later resumption. Minimising Colleague
50
- alone keeps voice playing, and a newer answer or another conversation is never
51
- stopped by this diagram control. Ask Colleague to repeat the explanation explicitly
52
- when needed. Colleague waits for the actual
53
- diagram and required audio completion receipt before another teaching cue or
54
- question. An unconfirmed receipt needs its current status checked, not an inferred
55
- pass or automatic replay. On phones, opening a teaching presentation minimises
56
- Colleague's frame while retaining the conversation, microphone and typed draft.