v86 0.3.6 → 0.3.7

package/bios/seabios/vgasrc/Kconfig

@@ -0,0 +1,211 @@
+# Kconfig SeaBIOS VGA BIOS configuration
+
+menu "VGA ROM"
+    choice
+        prompt "VGA Hardware Type"
+        default NO_VGABIOS
+
+        config NO_VGABIOS
+            bool "None"
+            help
+                Do not build a VGA BIOS.
+
+        config VGA_STANDARD_VGA
+            depends on QEMU
+            bool "QEMU/Bochs Original IBM 256K VGA"
+            select VGA_STDVGA_PORTS
+            help
+                Build basic VGA BIOS support (pre Super-VGA) for use
+                on emulators.
+
+        config VGA_CIRRUS
+            depends on QEMU
+            bool "QEMU/Bochs Cirrus SVGA"
+            select VGA_STDVGA_PORTS
+            help
+                Build support for Cirrus VGA emulation found on QEMU
+                and Bochs emulators.  This is for emulators; it is not
+                intended for use on real Cirrus hardware.
+
+        config VGA_BOCHS
+            depends on QEMU
+            bool "QEMU/Bochs VBE SVGA"
+            select VGA_STDVGA_PORTS
+            help
+                Build support for Bochs DISPI interface (a custom VBE
+                protocol) found on QEMU and Bochs emulators.
+
+        config VGA_GEODEGX2
+            bool "GeodeGX2"
+            select VGA_STDVGA_PORTS
+            help
+                Build support for Geode GX2 vga.
+
+        config VGA_GEODELX
+            bool "GeodeLX"
+            select VGA_STDVGA_PORTS
+            help
+                Build support for Geode LX vga.
+
+        config VGA_COREBOOT
+            depends on COREBOOT
+            bool "coreboot linear framebuffer"
+            select VGA_EMULATE_TEXT
+            help
+                Build support for a vgabios wrapper around video
+                devices initialized using coreboot native vga init.
+
+        config DISPLAY_BOCHS
+            depends on QEMU
+            bool "qemu bochs-display support"
+            select VGA_EMULATE_TEXT
+            help
+                Build support for the qemu bochs-display device, which
+                is basically qemu stdvga without the legacy vga
+                emulation, supporting only 16+32 bpp VESA video modes
+                in a linear framebuffer.  So this uses cbvga text mode
+                emulation.
+
+                The bochs-display device is available in qemu
+                v3.0+. The vgabios works with the qemu stdvga too (use
+                "qemu -device VGA,romfile=/path/to/vgabios.bin")".
+
+        config VGA_RAMFB
+            depends on QEMU
+            bool "qemu ramfb"
+            select VGA_EMULATE_TEXT
+            help
+                qemu ram framebuffer support (-device ramfb).
+
+    endchoice
+
+    choice
+        depends on VGA_BOCHS
+        prompt "bochs vga variant"
+        default VGA_BOCHS_STDVGA
+
+        config VGA_BOCHS_STDVGA
+            bool "qemu stdvga / bochs svga"
+
+        config VGA_BOCHS_VMWARE
+            bool "qemu vmware svga"
+
+        config VGA_BOCHS_QXL
+            bool "qemu qxl vga"
+
+        config VGA_BOCHS_VIRTIO
+            bool "qemu virtio vga"
+
+    endchoice
+
+    choice
+        depends on VGA_GEODEGX2 || VGA_GEODELX
+        prompt "Output Mode"
+        default VGA_OUTPUT_CRT
+
+        config VGA_OUTPUT_CRT
+            bool "CRT"
+            help
+                Use CRT for output.
+
+        config VGA_OUTPUT_PANEL
+            bool "Flat Panel"
+            help
+                Use flat panel for output.
+
+        config VGA_OUTPUT_CRT_PANEL
+            bool "CRT and Flat Panel"
+            help
+                Use CRT and flat panel for output.
+    endchoice
+
+    config BUILD_VGABIOS
+        bool
+        default !NO_VGABIOS
+
+    config VGA_STDVGA_PORTS
+        bool
+    config VGA_EMULATE_TEXT
+        bool
+        help
+            Support emulating text mode features when only a
+            framebuffer is available.
+
+    config VGA_FIXUP_ASM
+        depends on BUILD_VGABIOS
+        bool "Fixup assembler to work with broken emulators"
+        default y
+        help
+            This option will cause the build to attempt to avoid
+            certain x86 machine instructions that are known to confuse
+            some emulators.  In particular, it works around
+            deficiencies in the Windows vgabios emulator and the
+            x86emu vgabios emulator (frequently used in Xorg).
+
+    config VGA_ALLOCATE_EXTRA_STACK
+        depends on BUILD_VGABIOS
+        bool "Allocate an internal stack for 16bit interrupt entry point"
+        default y
+        help
+            Attempt to allocate (via BIOS PMM call) an internal stack
+            for the legacy 16bit 0x10 interrupt entry point.  This
+            reduces the amount of space on the caller's stack that
+            SeaVGABIOS uses.
+
+    config VGA_EXTRA_STACK_SIZE
+        int
+        default 512
+
+    config VGA_VBE
+        depends on BUILD_VGABIOS
+        bool "Video BIOS Extensions (VBE)"
+        default y
+        help
+            Support VBE.
+
+    config VGA_PCI
+        depends on BUILD_VGABIOS && !VGA_COREBOOT
+        bool "PCI ROM Headers"
+        default y
+        help
+            Build PCI ROM headers so the vga rom can be extracted from
+            a PCI device.
+
+    config OVERRIDE_PCI_ID
+        depends on VGA_PCI
+        bool "Override PCI Vendor and Device IDs"
+        help
+            Specify specific values for the PCI Vendor and Device IDs.
+
+    config VGA_VID
+        depends on VGA_PCI
+        hex
+        prompt "PCI Vendor ID" if OVERRIDE_PCI_ID
+        default 0x1013 if VGA_CIRRUS
+        default 0x1234 if VGA_BOCHS_STDVGA
+        default 0x15ad if VGA_BOCHS_VMWARE
+        default 0x1b36 if VGA_BOCHS_QXL
+        default 0x1af4 if VGA_BOCHS_VIRTIO
+        default 0x100b if VGA_GEODEGX2
+        default 0x1022 if VGA_GEODELX
+        default 0x1234 if DISPLAY_BOCHS
+        default 0x0000
+        help
+            Vendor ID for the PCI ROM
+
+    config VGA_DID
+        depends on VGA_PCI
+        hex
+        prompt "PCI Vendor ID" if OVERRIDE_PCI_ID
+        default 0x00b8 if VGA_CIRRUS
+        default 0x1111 if VGA_BOCHS_STDVGA
+        default 0x0405 if VGA_BOCHS_VMWARE
+        default 0x0100 if VGA_BOCHS_QXL
+        default 0x1050 if VGA_BOCHS_VIRTIO
+        default 0x0030 if VGA_GEODEGX2
+        default 0x2081 if VGA_GEODELX
+        default 0x1111 if DISPLAY_BOCHS
+        default 0x0000
+        help
+            Device ID for the PCI ROM
+endmenu

package/bios/seabios/vgasrc/bochsdisplay.c

@@ -0,0 +1,59 @@
+#include "biosvar.h" // GET_BDA
+#include "output.h" // dprintf
+#include "string.h" // memset16_far
+#include "bochsvga.h" // VBE_BOCHS_*
+#include "hw/pci.h" // pci_config_readl
+#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0
+#include "vgautil.h" // VBE_total_memory
+
+#define FRAMEBUFFER_WIDTH      1024
+#define FRAMEBUFFER_HEIGHT     768
+#define FRAMEBUFFER_BPP        4
+#define FRAMEBUFFER_STRIDE     (FRAMEBUFFER_BPP * FRAMEBUFFER_WIDTH)
+#define FRAMEBUFFER_SIZE       (FRAMEBUFFER_STRIDE * FRAMEBUFFER_HEIGHT)
+
+int
+bochs_display_setup(void)
+{
+    dprintf(1, "bochs-display: setup called\n");
+
+    if (GET_GLOBAL(HaveRunInit))
+        return 0;
+
+    int bdf = GET_GLOBAL(VgaBDF);
+    if (bdf == 0)
+        return 0;
+
+    u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_0);
+    u32 lfb_addr = bar & PCI_BASE_ADDRESS_MEM_MASK;
+    bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_2);
+    u32 io_addr = bar & PCI_BASE_ADDRESS_IO_MASK;
+    dprintf(1, "bochs-display: bdf %02x:%02x.%x, bar 0 at 0x%x, bar 1 at 0x%x\n"
+            , pci_bdf_to_bus(bdf) , pci_bdf_to_dev(bdf), pci_bdf_to_fn(bdf),
+            lfb_addr, io_addr);
+
+    u16 *dispi = (void*)(io_addr + 0x500);
+    u8 *vga = (void*)(io_addr + 0x400);
+    u16 id = readw(dispi + VBE_DISPI_INDEX_ID);
+    dprintf(1, "bochs-display: id is 0x%x, %s\n", id
+            , id == VBE_DISPI_ID5 ? "good" : "FAIL");
+    if (id != VBE_DISPI_ID5)
+        return -1;
+
+     dprintf(1, "bochs-display: using %dx%d, %d bpp (%d stride)\n"
+            , FRAMEBUFFER_WIDTH, FRAMEBUFFER_HEIGHT
+            , FRAMEBUFFER_BPP * 8, FRAMEBUFFER_STRIDE);
+
+    cbvga_setup_modes(lfb_addr, FRAMEBUFFER_BPP * 8,
+                      FRAMEBUFFER_WIDTH, FRAMEBUFFER_HEIGHT,
+                      FRAMEBUFFER_STRIDE);
+
+    writew(dispi + VBE_DISPI_INDEX_XRES,   FRAMEBUFFER_WIDTH);
+    writew(dispi + VBE_DISPI_INDEX_YRES,   FRAMEBUFFER_HEIGHT);
+    writew(dispi + VBE_DISPI_INDEX_BPP,    FRAMEBUFFER_BPP * 8);
+    writew(dispi + VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED);
+
+    writeb(vga, 0x20); /* unblank (for qemu -device VGA) */
+
+    return 0;
+}