usb 2.0.0-alpha.1 → 2.0.3

package/Readme.md

@@ -1,339 +0,0 @@
-USB Library for Node.JS
-===============================
-
-[![Build Status](https://github.com/tessel/node-usb/workflows/prebuild/badge.svg)](https://github.com/tessel/node-usb/actions)
-
-Node.JS library for communicating with USB devices in JavaScript / CoffeeScript.
-
-This is a refactoring / rewrite of Christopher Klein's [node-usb](https://github.com/schakko/node-usb). The API is not compatible (hopefully you find it an improvement).
-
-It's based entirely on libusb's asynchronous API for better efficiency, and provides a stream API for continuously streaming data or events.
-
-Installation
-============
-
-Libusb is included as a submodule. On Linux, you'll need libudev to build libusb. On Ubuntu/Debian: `sudo apt-get install build-essential libudev-dev`
-
-Then, just run
-
-	npm install usb
-
-to install from npm. See the bottom of this page for instructions for building from a git checkout.
-
-### Windows
-Use [Zadig](http://zadig.akeo.ie/) to install the WinUSB driver for your USB device. Otherwise you will get `LIBUSB_ERROR_NOT_SUPPORTED` when attempting to open devices.
-
-
-API
-===
-
-	var usb = require('usb')
-
-usb
----
-
-Top-level object.
-
-### usb.getDeviceList()
-Return a list of `Device` objects for the USB devices attached to the system.
-
-### usb.findByIds(vid, pid)
-Convenience method to get the first device with the specified VID and PID, or `undefined` if no such device is present.
-
-### usb.LIBUSB_*
-Constant properties from libusb
-
-### usb.setDebugLevel(level : int)
-Set the libusb debug level (between 0 and 4)
-
-Device
-------
-
-Represents a USB device.
-
-### .busNumber
-Integer USB device number
-
-### .deviceAddress
-Integer USB device address
-
-### .portNumbers
-Array containing the USB device port numbers, or `undefined` if not supported on this platform.
-
-### .deviceDescriptor
-Object with properties for the fields of the device descriptor:
-
-  - bLength
-  - bDescriptorType
-  - bcdUSB
-  - bDeviceClass
-  - bDeviceSubClass
-  - bDeviceProtocol
-  - bMaxPacketSize0
-  - idVendor
-  - idProduct
-  - bcdDevice
-  - iManufacturer
-  - iProduct
-  - iSerialNumber
-  - bNumConfigurations
-
-### .configDescriptor
-Object with properties for the fields of the configuration descriptor:
-
-  - bLength
-  - bDescriptorType
-  - wTotalLength
-  - bNumInterfaces
-  - bConfigurationValue
-  - iConfiguration
-  - bmAttributes
-  - bMaxPower
-  - extra (Buffer containing any extra data or additional descriptors)
-
-### .allConfigDescriptors
-	Contains all config descriptors of the device (same structure as .configDescriptor above)
-
-### .parent
-	Contains the parent of the device, such as a hub. If there is no parent this property is set to `null`.
-
-### .open()
-
-Open the device. All methods below require the device to be open before use.
-
-### .close()
-
-Close the device.
-
-### .controlTransfer(bmRequestType, bRequest, wValue, wIndex, data_or_length, callback(error, data))
-
-Perform a control transfer with `libusb_control_transfer`.
-
-Parameter `data_or_length` can be a integer length for an IN transfer, or a Buffer for an out transfer. The type must match the direction specified in the MSB of bmRequestType.
-
-The `data` parameter of the callback is always undefined for OUT transfers, or will be passed a Buffer for IN transfers.
-
-A [package is available to calculate bmRequestType](https://www.npmjs.com/package/bmrequesttype) if needed.
-
-### .setConfiguration(id, callback(error))
-Set the device configuration to something other than the default (0). To use this, first call `.open(false)` (which tells it not to auto configure), then before claiming an interface, call this method.
-
-### .getStringDescriptor(index, callback(error, data))
-Perform a control transfer to retrieve a string descriptor
-
-### .getBosDescriptor(callback(error, bosDescriptor))
-Perform a control transfer to retrieve an object with properties for the fields of the Binary Object Store descriptor:
-
-  - bLength
-  - bDescriptorType
-  - wTotalLength
-  - bNumDeviceCaps
-
-### .getCapabilities(callback(error, capabilities))
-Retrieve a list of Capability objects for the Binary Object Store capabilities of the device.
-
-### .interface(interface)
-Return the interface with the specified interface number.
-
-### .interfaces
-List of Interface objects for the interfaces of the default configuration of the device.
-
-### .timeout
-Timeout in milliseconds to use for control transfers.
-
-### .reset(callback(error))
-Performs a reset of the device. Callback is called when complete.
-
-
-Interface
----------
-
-### .endpoint(address)
-Return the InEndpoint or OutEndpoint with the specified address.
-
-### .endpoints
-List of endpoints on this interface: InEndpoint and OutEndpoint objects.
-
-### .interface
-Integer interface number.
-
-### .altSetting
-Integer alternate setting number.
-
-### .setAltSetting(altSetting, callback(error))
-Sets the alternate setting. It updates the `interface.endpoints` array to reflect the endpoints found in the alternate setting.
-
-### .claim()
-Claims the interface. This method must be called before using any endpoints of this interface.
-
-### .release([closeEndpoints], callback(error))
-Releases the interface and resets the alternate setting. Calls callback when complete.
-
-It is an error to release an interface with pending transfers. If the optional closeEndpoints parameter is true, any active endpoint streams are stopped (see `Endpoint.stopStream`), and the interface is released after the stream transfers are cancelled. Transfers submitted individually with `Endpoint.transfer` are not affected by this parameter.
-
-### .isKernelDriverActive()
-Returns `false` if a kernel driver is not active; `true` if active.
-
-### .detachKernelDriver()
-Detaches the kernel driver from the interface.
-
-### .attachKernelDriver()
-Re-attaches the kernel driver for the interface.
-
-### .descriptor
-Object with fields from the interface descriptor -- see libusb documentation or USB spec.
-
-  - bLength
-  - bDescriptorType
-  - bInterfaceNumber
-  - bAlternateSetting
-  - bNumEndpoints
-  - bInterfaceClass
-  - bInterfaceSubClass
-  - bInterfaceProtocol
-  - iInterface
-  - extra (Buffer containing any extra data or additional descriptors)
-
-
-Capability
----------
-
-### .type
-Integer capability type.
-
-### .data
-Buffer capability data.
-
-### .descriptor
-Object with fields from the capability descriptor -- see libusb documentation or USB spec.
-  - bLength
-  - bDescriptorType
-  - bDevCapabilityType
-
-
-Endpoint
---------
-
-Common base for InEndpoint and OutEndpoint, see below.
-
-### .direction
-Endpoint direction: `"in"` or `"out"`.
-
-### .transferType
-Endpoint type: `usb.LIBUSB_TRANSFER_TYPE_BULK`, `usb.LIBUSB_TRANSFER_TYPE_INTERRUPT`, or `usb.LIBUSB_TRANSFER_TYPE_ISOCHRONOUS`.
-
-###  .descriptor
-Object with fields from the endpoint descriptor -- see libusb documentation or USB spec.
-
-  - bLength
-  - bDescriptorType
-  - bEndpointAddress
-  - bmAttributes
-  - wMaxPacketSize
-  - bInterval
-  - bRefresh
-  - bSynchAddress
-  - extra (Buffer containing any extra data or additional descriptors)
-
-### .timeout
-Sets the timeout in milliseconds for transfers on this endpoint. The default, `0`, is infinite timeout.
-
-### .clearHalt(callback(error))
-Clear the halt/stall condition for this endpoint.
-
-InEndpoint
-----------
-
-Endpoints in the IN direction (device->PC) have this type.
-
-### .transfer(length, callback(error, data))
-Perform a transfer to read data from the endpoint.
-
-If length is greater than maxPacketSize, libusb will automatically split the transfer in multiple packets, and you will receive one callback with all data once all packets are complete.
-
-`this` in the callback is the InEndpoint object.
-
-### .startPoll(nTransfers=3, transferSize=maxPacketSize)
-Start polling the endpoint.
-
-The library will keep `nTransfers` transfers of size `transferSize` pending in
-the kernel at all times to ensure continuous data flow. This is handled by the
-libusb event thread, so it continues even if the Node v8 thread is busy. The
-`data` and `error` events are emitted as transfers complete.
-
-### .stopPoll(cb)
-Stop polling.
-
-Further data may still be received. The `end` event is emitted and the callback
-is called once all transfers have completed or canceled.
-
-### Event: data(data : Buffer)
-Emitted with data received by the polling transfers
-
-### Event: error(error)
-Emitted when polling encounters an error. All in flight transfers will be automatically canceled and no further polling will be done. You have to wait for the `end` event before you can start polling again.
-
-### Event: end
-Emitted when polling has been canceled
-
-OutEndpoint
------------
-
-Endpoints in the OUT direction (PC->device) have this type.
-
-### .transfer(data, callback(error))
-Perform a transfer to write `data` to the endpoint.
-
-If length is greater than maxPacketSize, libusb will automatically split the transfer in multiple packets, and you will receive one callback once all packets are complete.
-
-`this` in the callback is the OutEndpoint object.
-
-### Event: error(error)
-Emitted when the stream encounters an error.
-
-### Event: end
-Emitted when the stream has been stopped and all pending requests have been completed.
-
-
-UsbDetection
-------------
-
-### usb.on('attach', function(device) { ... });
-Attaches a callback to plugging in a `device`.
-
-### usb.on('detach', function(device) { ... });
-Attaches a callback to unplugging a `device`.
-
-
-Development and testing
-=======================
-
-To build from git:
-
-	git clone --recursive https://github.com/tessel/node-usb.git
-	cd node-usb
-	npm install
-
-To execute the unit tests, [CoffeeScript](http://coffeescript.org) is required. Run
-
-	npm test
-
-Some tests require an [attached STM32F103 Microprocessor USB device with specific firmware](https://github.com/thegecko/node-usb-test-firmware).
-
-	npm run --silent full-test
-	npm run --silent valgrind
-
-Limitations
-===========
-
-Does not support:
-
-  - Configurations other than the default one
-  - Isochronous transfers
-
-License
-=======
-
-MIT
-
-Note that the compiled Node extension includes Libusb, and is thus subject to the LGPL.

package/dist/webusb/typed-event-target.d.ts

@@ -1,11 +0,0 @@
-export declare class TypedEventTarget<T extends {
-    [key: string]: Event;
-}> implements EventTarget {
-    private emitter;
-    addEventListener(type: keyof T, listener: (event: T[keyof T]) => void): void;
-    addEventListener(type: string, listener: (event: Event) => void): void;
-    removeEventListener(type: keyof T, listener: (event: T[keyof T]) => void): void;
-    removeEventListener(type: string, listener: (event: Event) => void): void;
-    dispatchEvent(event: T[keyof T]): boolean;
-    dispatchEvent(event: Event): boolean;
-}

package/dist/webusb/typed-event-target.js

@@ -1,21 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.TypedEventTarget = void 0;
-var events_1 = require("events");
-var TypedEventTarget = /** @class */ (function () {
-    function TypedEventTarget() {
-        this.emitter = new events_1.EventEmitter();
-    }
-    TypedEventTarget.prototype.addEventListener = function (type, listener) {
-        this.emitter.addListener(type, listener);
-    };
-    TypedEventTarget.prototype.removeEventListener = function (type, listener) {
-        this.emitter.removeListener(type, listener);
-    };
-    TypedEventTarget.prototype.dispatchEvent = function (event) {
-        return this.emitter.emit(event.type, event);
-    };
-    return TypedEventTarget;
-}());
-exports.TypedEventTarget = TypedEventTarget;
-//# sourceMappingURL=typed-event-target.js.map

package/dist/webusb/typed-event-target.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"typed-event-target.js","sourceRoot":"","sources":["../../tsc/webusb/typed-event-target.ts"],"names":[],"mappings":";;;AAAA,iCAAsC;AAEtC;IAAA;QACY,YAAO,GAAG,IAAI,qBAAY,EAAE,CAAC;IAmBzC,CAAC;IAfU,2CAAgB,GAAvB,UAAwB,IAAY,EAAE,QAAqC;QACvE,IAAI,CAAC,OAAO,CAAC,WAAW,CAAC,IAAI,EAAE,QAAQ,CAAC,CAAC;IAC7C,CAAC;IAIM,8CAAmB,GAA1B,UAA2B,IAAY,EAAE,QAAqC;QAC1E,IAAI,CAAC,OAAO,CAAC,cAAc,CAAC,IAAI,EAAE,QAAQ,CAAC,CAAC;IAChD,CAAC;IAIM,wCAAa,GAApB,UAAqB,KAAiB;QAClC,OAAO,IAAI,CAAC,OAAO,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,KAAK,CAAC,CAAC;IAChD,CAAC;IACL,uBAAC;AAAD,CAAC,AApBD,IAoBC;AApBY,4CAAgB"}