tsdraft 0.2.0 → 0.2.2

package/dist/layers.d.ts

@@ -0,0 +1,66 @@
+import type { Layer } from "./drawing.ts";
+/** C1 controls and invisible formatting characters, such as the zero-width space. */
+export declare const REJECTED_FORMAT = "\u0080\u0081\u0082\u0083\u0084\u0085\u0086\u0087\u0088\u0089\u008A\u008B\u008C\u008D\u008E\u008F\u0090\u0091\u0092\u0093\u0094\u0095\u0096\u0097\u0098\u0099\u009A\u009B\u009C\u009D\u009E\u009F\u0600\u0601\u0602\u0603\u06DD\u070F\u17B4\u17B5\u200B\u200C\u200D\u200E\u200F\u202A\u202B\u202C\u202D\u202E\u2060\u2061\u2062\u2063\u2064\u206A\u206B\u206C\u206D\u206E\u206F\uFEFF\uFFF9\uFFFA\uFFFB";
+/** Superscript and subscript letters, Roman numeral characters and letterlike symbols such as the ohm sign. */
+export declare const REJECTED_LETTERLIKE = "\u2071\u207F\u2090\u2091\u2092\u2093\u2094\u2102\u2107\u210A\u210B\u210C\u210D\u210E\u210F\u2110\u2111\u2112\u2113\u2115\u2119\u211A\u211B\u211C\u211D\u2124\u2126\u2128\u212A\u212B\u212C\u212D\u212F\u2130\u2131\u2132\u2133\u2134\u2135\u2136\u2137\u2138\u2139\u213C\u213D\u213E\u213F\u2145\u2146\u2147\u2148\u2149\u214E\u2180\u2181\u2182\u2183\u2184\u2185\u2186\u2187\u2188";
+/** Glagolitic letters and the Latin Extended-C block. */
+export declare const REJECTED_GLAGOLITIC = "\u2C00\u2C01\u2C02\u2C03\u2C04\u2C05\u2C06\u2C07\u2C08\u2C09\u2C0A\u2C0B\u2C0C\u2C0D\u2C0E\u2C0F\u2C10\u2C11\u2C12\u2C13\u2C14\u2C15\u2C16\u2C17\u2C18\u2C19\u2C1A\u2C1B\u2C1C\u2C1D\u2C1E\u2C1F\u2C20\u2C21\u2C22\u2C23\u2C24\u2C25\u2C26\u2C27\u2C28\u2C29\u2C2A\u2C2B\u2C2C\u2C2D\u2C2E\u2C30\u2C31\u2C32\u2C33\u2C34\u2C35\u2C36\u2C37\u2C38\u2C39\u2C3A\u2C3B\u2C3C\u2C3D\u2C3E\u2C3F\u2C40\u2C41\u2C42\u2C43\u2C44\u2C45\u2C46\u2C47\u2C48\u2C49\u2C4A\u2C4B\u2C4C\u2C4D\u2C4E\u2C4F\u2C50\u2C51\u2C52\u2C53\u2C54\u2C55\u2C56\u2C57\u2C58\u2C59\u2C5A\u2C5B\u2C5C\u2C5D\u2C5E\u2C60\u2C61\u2C62\u2C63\u2C64\u2C65\u2C66\u2C67\u2C68\u2C69\u2C6A\u2C6B\u2C6C\u2C6D\u2C6E\u2C6F\u2C71\u2C72\u2C73\u2C74\u2C75\u2C76\u2C77\u2C78\u2C79\u2C7A\u2C7B\u2C7C\u2C7D";
+/** Coptic letters. */
+export declare const REJECTED_COPTIC = "\u2C80\u2C81\u2C82\u2C83\u2C84\u2C85\u2C86\u2C87\u2C88\u2C89\u2C8A\u2C8B\u2C8C\u2C8D\u2C8E\u2C8F\u2C90\u2C91\u2C92\u2C93\u2C94\u2C95\u2C96\u2C97\u2C98\u2C99\u2C9A\u2C9B\u2C9C\u2C9D\u2C9E\u2C9F\u2CA0\u2CA1\u2CA2\u2CA3\u2CA4\u2CA5\u2CA6\u2CA7\u2CA8\u2CA9\u2CAA\u2CAB\u2CAC\u2CAD\u2CAE\u2CAF\u2CB0\u2CB1\u2CB2\u2CB3\u2CB4\u2CB5\u2CB6\u2CB7\u2CB8\u2CB9\u2CBA\u2CBB\u2CBC\u2CBD\u2CBE\u2CBF\u2CC0\u2CC1\u2CC2\u2CC3\u2CC4\u2CC5\u2CC6\u2CC7\u2CC8\u2CC9\u2CCA\u2CCB\u2CCC\u2CCD\u2CCE\u2CCF\u2CD0\u2CD1\u2CD2\u2CD3\u2CD4\u2CD5\u2CD6\u2CD7\u2CD8\u2CD9\u2CDA\u2CDB\u2CDC\u2CDD\u2CDE\u2CDF\u2CE0\u2CE1\u2CE2\u2CE3\u2CE4";
+/** Georgian Supplement, Tifinagh and Ethiopic Extended letters. */
+export declare const REJECTED_GEORGIAN = "\u2D00\u2D01\u2D02\u2D03\u2D04\u2D05\u2D06\u2D07\u2D08\u2D09\u2D0A\u2D0B\u2D0C\u2D0D\u2D0E\u2D0F\u2D10\u2D11\u2D12\u2D13\u2D14\u2D15\u2D16\u2D17\u2D18\u2D19\u2D1A\u2D1B\u2D1C\u2D1D\u2D1E\u2D1F\u2D20\u2D21\u2D22\u2D23\u2D24\u2D25\u2D30\u2D31\u2D32\u2D33\u2D34\u2D35\u2D36\u2D37\u2D38\u2D39\u2D3A\u2D3B\u2D3C\u2D3D\u2D3E\u2D3F\u2D40\u2D41\u2D42\u2D43\u2D44\u2D45\u2D46\u2D47\u2D48\u2D49\u2D4A\u2D4B\u2D4C\u2D4D\u2D4E\u2D4F\u2D50\u2D51\u2D52\u2D53\u2D54\u2D55\u2D56\u2D57\u2D58\u2D59\u2D5A\u2D5B\u2D5C\u2D5D\u2D5E\u2D5F\u2D60\u2D61\u2D62\u2D63\u2D64\u2D65\u2D6F\u2D80\u2D81\u2D82\u2D83\u2D84\u2D85\u2D86\u2D87\u2D88\u2D89\u2D8A\u2D8B\u2D8C\u2D8D\u2D8E\u2D8F\u2D90\u2D91\u2D92\u2D93\u2D94\u2D95\u2D96\u2DA0\u2DA1\u2DA2\u2DA3\u2DA4\u2DA5\u2DA6\u2DA8\u2DA9\u2DAA\u2DAB\u2DAC\u2DAD\u2DAE\u2DB0\u2DB1\u2DB2\u2DB3\u2DB4\u2DB5\u2DB6\u2DB8\u2DB9\u2DBA\u2DBB\u2DBC\u2DBD\u2DBE\u2DC0\u2DC1\u2DC2\u2DC3\u2DC4\u2DC5\u2DC6\u2DC8\u2DC9\u2DCA\u2DCB\u2DCC\u2DCD\u2DCE\u2DD0\u2DD1\u2DD2\u2DD3\u2DD4\u2DD5\u2DD6\u2DD8\u2DD9\u2DDA\u2DDB\u2DDC\u2DDD\u2DDE";
+/** The private-use characters U+E800 to U+E8FF. */
+export declare const REJECTED_PRIVATE = "\uE800\uE801\uE802\uE803\uE804\uE805\uE806\uE807\uE808\uE809\uE80A\uE80B\uE80C\uE80D\uE80E\uE80F\uE810\uE811\uE812\uE813\uE814\uE815\uE816\uE817\uE818\uE819\uE81A\uE81B\uE81C\uE81D\uE81E\uE81F\uE820\uE821\uE822\uE823\uE824\uE825\uE826\uE827\uE828\uE829\uE82A\uE82B\uE82C\uE82D\uE82E\uE82F\uE830\uE831\uE832\uE833\uE834\uE835\uE836\uE837\uE838\uE839\uE83A\uE83B\uE83C\uE83D\uE83E\uE83F\uE840\uE841\uE842\uE843\uE844\uE845\uE846\uE847\uE848\uE849\uE84A\uE84B\uE84C\uE84D\uE84E\uE84F\uE850\uE851\uE852\uE853\uE854\uE855\uE856\uE857\uE858\uE859\uE85A\uE85B\uE85C\uE85D\uE85E\uE85F\uE860\uE861\uE862\uE863\uE864\uE865\uE866\uE867\uE868\uE869\uE86A\uE86B\uE86C\uE86D\uE86E\uE86F\uE870\uE871\uE872\uE873\uE874\uE875\uE876\uE877\uE878\uE879\uE87A\uE87B\uE87C\uE87D\uE87E\uE87F\uE880\uE881\uE882\uE883\uE884\uE885\uE886\uE887\uE888\uE889\uE88A\uE88B\uE88C\uE88D\uE88E\uE88F\uE890\uE891\uE892\uE893\uE894\uE895\uE896\uE897\uE898\uE899\uE89A\uE89B\uE89C\uE89D\uE89E\uE89F\uE8A0\uE8A1\uE8A2\uE8A3\uE8A4\uE8A5\uE8A6\uE8A7\uE8A8\uE8A9\uE8AA\uE8AB\uE8AC\uE8AD\uE8AE\uE8AF\uE8B0\uE8B1\uE8B2\uE8B3\uE8B4\uE8B5\uE8B6\uE8B7\uE8B8\uE8B9\uE8BA\uE8BB\uE8BC\uE8BD\uE8BE\uE8BF\uE8C0\uE8C1\uE8C2\uE8C3\uE8C4\uE8C5\uE8C6\uE8C7\uE8C8\uE8C9\uE8CA\uE8CB\uE8CC\uE8CD\uE8CE\uE8CF\uE8D0\uE8D1\uE8D2\uE8D3\uE8D4\uE8D5\uE8D6\uE8D7\uE8D8\uE8D9\uE8DA\uE8DB\uE8DC\uE8DD\uE8DE\uE8DF\uE8E0\uE8E1\uE8E2\uE8E3\uE8E4\uE8E5\uE8E6\uE8E7\uE8E8\uE8E9\uE8EA\uE8EB\uE8EC\uE8ED\uE8EE\uE8EF\uE8F0\uE8F1\uE8F2\uE8F3\uE8F4\uE8F5\uE8F6\uE8F7\uE8F8\uE8F9\uE8FA\uE8FB\uE8FC\uE8FD\uE8FE\uE8FF";
+/**
+ * Finds the first character of a layer name that AutoCAD rejects, beyond the
+ * ASCII punctuation and control characters that `layerNameProblem` checks.
+ *
+ * @param name - The layer name.
+ * @returns The character, or undefined when the name has none.
+ */
+export declare function rejectedNameCharacter(name: string): string | undefined;
+/**
+ * The form of a layer name that AutoCAD looks layers up by. Two names with the
+ * same key are one layer to AutoCAD: an entity on `wall` goes on a layer
+ * declared as `WALL`, and AutoCAD keeps only the first of two such layers.
+ *
+ * AutoCAD lower-cases one character at a time from its own table, so this is
+ * not `toLowerCase()`: a final sigma ς, a dotless ı and ß stay as they are.
+ *
+ * @param name - The layer name.
+ * @returns The key to compare layer names by.
+ */
+export declare function layerKey(name: string): string;
+/**
+ * The form of a layer name that AutoCAD's AUDIT compares when it looks for
+ * duplicate names. AUDIT takes more names for the same than the layer table
+ * does, so two layers can have different `layerKey`s and still be an AUDIT
+ * error. Two names with the same key here are such a pair, unless they have
+ * the same `layerKey` too.
+ *
+ * The key follows the kinds of pair measured in AutoCAD 2025:
+ *
+ * - A few single letters, such as σ and ς.
+ * - A letter and the letters it stands for, such as ß and `ss`.
+ * - A composed character and its decomposed form, such as é and `e` with a
+ *   combining acute accent, with its marks in any order Unicode counts as the
+ *   same, such as a dot below before or after a circumflex.
+ * - A name with a soft hyphen inside it or in front of it and the same name
+ *   without.
+ *
+ * It is not AUDIT's whole comparison. AUDIT also takes some compatibility
+ * characters for their plain forms, and cannot tell two characters apart when
+ * it knows neither.
+ *
+ * @param name - The layer name.
+ * @returns The key to find AUDIT's duplicate names by.
+ */
+export declare function layerAuditKey(name: string): string;
+/**
+ * Orders layers for a DXF layer table. AutoCAD's AUDIT reports "Layer zero name
+ * found at incorrect index" when layer `0` is not the first record.
+ *
+ * @param layers - The drawing's layers, in any order.
+ * @returns The layers with `0` first and the others in their given order.
+ */
+export declare function layerZeroFirst(layers: readonly Layer[]): readonly Layer[];

package/dist/layers.js

@@ -0,0 +1,255 @@
+// AutoCAD discards a drawing whose layer table has a name with one of the
+// characters below, as it does for the ASCII punctuation `rules.ts` lists. The
+// exception is the private-use block, which it replaces with `\M+00000`. They
+// are string literals, with every character written as an escape, so that
+// `rules.ts` can also reject them in a layer name written as a literal.
+/** C1 controls and invisible formatting characters, such as the zero-width space. */
+export const REJECTED_FORMAT = "\
+\u0080\u0081\u0082\u0083\u0084\u0085\u0086\u0087\u0088\u0089\u008a\u008b\u008c\u008d\u008e\
+\u008f\u0090\u0091\u0092\u0093\u0094\u0095\u0096\u0097\u0098\u0099\u009a\u009b\u009c\u009d\
+\u009e\u009f\u0600\u0601\u0602\u0603\u06dd\u070f\u17b4\u17b5\u200b\u200c\u200d\u200e\u200f\
+\u202a\u202b\u202c\u202d\u202e\u2060\u2061\u2062\u2063\u2064\u206a\u206b\u206c\u206d\u206e\
+\u206f\ufeff\ufff9\ufffa\ufffb";
+/** Superscript and subscript letters, Roman numeral characters and letterlike symbols such as the ohm sign. */
+export const REJECTED_LETTERLIKE = "\
+\u2071\u207f\u2090\u2091\u2092\u2093\u2094\u2102\u2107\u210a\u210b\u210c\u210d\u210e\u210f\
+\u2110\u2111\u2112\u2113\u2115\u2119\u211a\u211b\u211c\u211d\u2124\u2126\u2128\u212a\u212b\
+\u212c\u212d\u212f\u2130\u2131\u2132\u2133\u2134\u2135\u2136\u2137\u2138\u2139\u213c\u213d\
+\u213e\u213f\u2145\u2146\u2147\u2148\u2149\u214e\u2180\u2181\u2182\u2183\u2184\u2185\u2186\
+\u2187\u2188";
+/** Glagolitic letters and the Latin Extended-C block. */
+export const REJECTED_GLAGOLITIC = "\
+\u2c00\u2c01\u2c02\u2c03\u2c04\u2c05\u2c06\u2c07\u2c08\u2c09\u2c0a\u2c0b\u2c0c\u2c0d\u2c0e\
+\u2c0f\u2c10\u2c11\u2c12\u2c13\u2c14\u2c15\u2c16\u2c17\u2c18\u2c19\u2c1a\u2c1b\u2c1c\u2c1d\
+\u2c1e\u2c1f\u2c20\u2c21\u2c22\u2c23\u2c24\u2c25\u2c26\u2c27\u2c28\u2c29\u2c2a\u2c2b\u2c2c\
+\u2c2d\u2c2e\u2c30\u2c31\u2c32\u2c33\u2c34\u2c35\u2c36\u2c37\u2c38\u2c39\u2c3a\u2c3b\u2c3c\
+\u2c3d\u2c3e\u2c3f\u2c40\u2c41\u2c42\u2c43\u2c44\u2c45\u2c46\u2c47\u2c48\u2c49\u2c4a\u2c4b\
+\u2c4c\u2c4d\u2c4e\u2c4f\u2c50\u2c51\u2c52\u2c53\u2c54\u2c55\u2c56\u2c57\u2c58\u2c59\u2c5a\
+\u2c5b\u2c5c\u2c5d\u2c5e\u2c60\u2c61\u2c62\u2c63\u2c64\u2c65\u2c66\u2c67\u2c68\u2c69\u2c6a\
+\u2c6b\u2c6c\u2c6d\u2c6e\u2c6f\u2c71\u2c72\u2c73\u2c74\u2c75\u2c76\u2c77\u2c78\u2c79\u2c7a\
+\u2c7b\u2c7c\u2c7d";
+/** Coptic letters. */
+export const REJECTED_COPTIC = "\
+\u2c80\u2c81\u2c82\u2c83\u2c84\u2c85\u2c86\u2c87\u2c88\u2c89\u2c8a\u2c8b\u2c8c\u2c8d\u2c8e\
+\u2c8f\u2c90\u2c91\u2c92\u2c93\u2c94\u2c95\u2c96\u2c97\u2c98\u2c99\u2c9a\u2c9b\u2c9c\u2c9d\
+\u2c9e\u2c9f\u2ca0\u2ca1\u2ca2\u2ca3\u2ca4\u2ca5\u2ca6\u2ca7\u2ca8\u2ca9\u2caa\u2cab\u2cac\
+\u2cad\u2cae\u2caf\u2cb0\u2cb1\u2cb2\u2cb3\u2cb4\u2cb5\u2cb6\u2cb7\u2cb8\u2cb9\u2cba\u2cbb\
+\u2cbc\u2cbd\u2cbe\u2cbf\u2cc0\u2cc1\u2cc2\u2cc3\u2cc4\u2cc5\u2cc6\u2cc7\u2cc8\u2cc9\u2cca\
+\u2ccb\u2ccc\u2ccd\u2cce\u2ccf\u2cd0\u2cd1\u2cd2\u2cd3\u2cd4\u2cd5\u2cd6\u2cd7\u2cd8\u2cd9\
+\u2cda\u2cdb\u2cdc\u2cdd\u2cde\u2cdf\u2ce0\u2ce1\u2ce2\u2ce3\u2ce4";
+/** Georgian Supplement, Tifinagh and Ethiopic Extended letters. */
+export const REJECTED_GEORGIAN = "\
+\u2d00\u2d01\u2d02\u2d03\u2d04\u2d05\u2d06\u2d07\u2d08\u2d09\u2d0a\u2d0b\u2d0c\u2d0d\u2d0e\
+\u2d0f\u2d10\u2d11\u2d12\u2d13\u2d14\u2d15\u2d16\u2d17\u2d18\u2d19\u2d1a\u2d1b\u2d1c\u2d1d\
+\u2d1e\u2d1f\u2d20\u2d21\u2d22\u2d23\u2d24\u2d25\u2d30\u2d31\u2d32\u2d33\u2d34\u2d35\u2d36\
+\u2d37\u2d38\u2d39\u2d3a\u2d3b\u2d3c\u2d3d\u2d3e\u2d3f\u2d40\u2d41\u2d42\u2d43\u2d44\u2d45\
+\u2d46\u2d47\u2d48\u2d49\u2d4a\u2d4b\u2d4c\u2d4d\u2d4e\u2d4f\u2d50\u2d51\u2d52\u2d53\u2d54\
+\u2d55\u2d56\u2d57\u2d58\u2d59\u2d5a\u2d5b\u2d5c\u2d5d\u2d5e\u2d5f\u2d60\u2d61\u2d62\u2d63\
+\u2d64\u2d65\u2d6f\u2d80\u2d81\u2d82\u2d83\u2d84\u2d85\u2d86\u2d87\u2d88\u2d89\u2d8a\u2d8b\
+\u2d8c\u2d8d\u2d8e\u2d8f\u2d90\u2d91\u2d92\u2d93\u2d94\u2d95\u2d96\u2da0\u2da1\u2da2\u2da3\
+\u2da4\u2da5\u2da6\u2da8\u2da9\u2daa\u2dab\u2dac\u2dad\u2dae\u2db0\u2db1\u2db2\u2db3\u2db4\
+\u2db5\u2db6\u2db8\u2db9\u2dba\u2dbb\u2dbc\u2dbd\u2dbe\u2dc0\u2dc1\u2dc2\u2dc3\u2dc4\u2dc5\
+\u2dc6\u2dc8\u2dc9\u2dca\u2dcb\u2dcc\u2dcd\u2dce\u2dd0\u2dd1\u2dd2\u2dd3\u2dd4\u2dd5\u2dd6\
+\u2dd8\u2dd9\u2dda\u2ddb\u2ddc\u2ddd\u2dde";
+/** The private-use characters U+E800 to U+E8FF. */
+export const REJECTED_PRIVATE = "\
+\ue800\ue801\ue802\ue803\ue804\ue805\ue806\ue807\ue808\ue809\ue80a\ue80b\ue80c\ue80d\ue80e\
+\ue80f\ue810\ue811\ue812\ue813\ue814\ue815\ue816\ue817\ue818\ue819\ue81a\ue81b\ue81c\ue81d\
+\ue81e\ue81f\ue820\ue821\ue822\ue823\ue824\ue825\ue826\ue827\ue828\ue829\ue82a\ue82b\ue82c\
+\ue82d\ue82e\ue82f\ue830\ue831\ue832\ue833\ue834\ue835\ue836\ue837\ue838\ue839\ue83a\ue83b\
+\ue83c\ue83d\ue83e\ue83f\ue840\ue841\ue842\ue843\ue844\ue845\ue846\ue847\ue848\ue849\ue84a\
+\ue84b\ue84c\ue84d\ue84e\ue84f\ue850\ue851\ue852\ue853\ue854\ue855\ue856\ue857\ue858\ue859\
+\ue85a\ue85b\ue85c\ue85d\ue85e\ue85f\ue860\ue861\ue862\ue863\ue864\ue865\ue866\ue867\ue868\
+\ue869\ue86a\ue86b\ue86c\ue86d\ue86e\ue86f\ue870\ue871\ue872\ue873\ue874\ue875\ue876\ue877\
+\ue878\ue879\ue87a\ue87b\ue87c\ue87d\ue87e\ue87f\ue880\ue881\ue882\ue883\ue884\ue885\ue886\
+\ue887\ue888\ue889\ue88a\ue88b\ue88c\ue88d\ue88e\ue88f\ue890\ue891\ue892\ue893\ue894\ue895\
+\ue896\ue897\ue898\ue899\ue89a\ue89b\ue89c\ue89d\ue89e\ue89f\ue8a0\ue8a1\ue8a2\ue8a3\ue8a4\
+\ue8a5\ue8a6\ue8a7\ue8a8\ue8a9\ue8aa\ue8ab\ue8ac\ue8ad\ue8ae\ue8af\ue8b0\ue8b1\ue8b2\ue8b3\
+\ue8b4\ue8b5\ue8b6\ue8b7\ue8b8\ue8b9\ue8ba\ue8bb\ue8bc\ue8bd\ue8be\ue8bf\ue8c0\ue8c1\ue8c2\
+\ue8c3\ue8c4\ue8c5\ue8c6\ue8c7\ue8c8\ue8c9\ue8ca\ue8cb\ue8cc\ue8cd\ue8ce\ue8cf\ue8d0\ue8d1\
+\ue8d2\ue8d3\ue8d4\ue8d5\ue8d6\ue8d7\ue8d8\ue8d9\ue8da\ue8db\ue8dc\ue8dd\ue8de\ue8df\ue8e0\
+\ue8e1\ue8e2\ue8e3\ue8e4\ue8e5\ue8e6\ue8e7\ue8e8\ue8e9\ue8ea\ue8eb\ue8ec\ue8ed\ue8ee\ue8ef\
+\ue8f0\ue8f1\ue8f2\ue8f3\ue8f4\ue8f5\ue8f6\ue8f7\ue8f8\ue8f9\ue8fa\ue8fb\ue8fc\ue8fd\ue8fe\
+\ue8ff";
+const REJECTED = new Set(REJECTED_FORMAT +
+    REJECTED_LETTERLIKE +
+    REJECTED_GLAGOLITIC +
+    REJECTED_COPTIC +
+    REJECTED_GEORGIAN +
+    REJECTED_PRIVATE);
+/**
+ * Finds the first character of a layer name that AutoCAD rejects, beyond the
+ * ASCII punctuation and control characters that `layerNameProblem` checks.
+ *
+ * @param name - The layer name.
+ * @returns The character, or undefined when the name has none.
+ */
+export function rejectedNameCharacter(name) {
+    for (const character of name)
+        if (REJECTED.has(character))
+            return character;
+    return undefined;
+}
+/**
+ * The capital letters AutoCAD lower-cases when it looks a layer name up, as
+ * hexadecimal code point ranges. `/2` marks a range that takes every second
+ * code point. AutoCAD's table is older and smaller than Unicode's: it leaves
+ * out Ÿ (U+0178), İ (U+0130) and ϴ (U+03F4), the title-case digraphs such as
+ * Dž (U+01C5), and most letters added since Unicode 5.1.
+ */
+const FOLDED_RANGES = "41-5a c0-d6 d8-de 100-12e/2 132-136/2 139-147/2 14a-176/2 179-17d/2 181-182 184-186/2 " +
+    "187-189/2 18a-18b 18e-191 193-194 196-198 19c-19d 19f-1a0 1a2-1a6/2 1a7-1a9/2 1ac-1ae/2 " +
+    "1af-1b1/2 1b2-1b3 1b5-1b7/2 1b8 1bc 1c4 1c7 1ca 1cd-1db/2 1de-1ee/2 1f1 1f4-1f6/2 " +
+    "1f7-1f8 1fa-232/2 23b-23d/2 241-243/2 244-246 248-24e/2 370-372/2 376 386-388/2 389-38a " +
+    "38c-38e/2 38f-391/2 392-3a1 3a3-3ab 3cf 3d8-3ee/2 3f7-3f9/2 3fa 3fd-42f 460-480/2 " +
+    "48a-4c0/2 4c1-4cd/2 4d0-522/2 531-556 1e00-1e94/2 1ea0-1efe/2 1f08-1f0f 1f18-1f1d " +
+    "1f28-1f2f 1f38-1f3f 1f48-1f4d 1f59-1f5f/2 1f68-1f6f 1f88-1f8f 1f98-1f9f 1fa8-1faf " +
+    "1fb8-1fbc 1fc8-1fcc 1fd8-1fdb 1fe8-1fec 1ff8-1ffc 2160-216f 24b6-24cf a640-a65e/2 " +
+    "a662-a66c/2 a680-a696/2 a722-a72e/2 a732-a76e/2 a779-a77d/2 a77e-a786/2 a78b ff21-ff3a";
+const FOLDED = new Set(FOLDED_RANGES.split(" ").flatMap((range) => {
+    const [span = "", step = "1"] = range.split("/");
+    const [first = "", last = first] = span.split("-");
+    const codes = [];
+    for (let code = parseInt(first, 16); code <= parseInt(last, 16); code += Number(step)) {
+        codes.push(code);
+    }
+    return codes;
+}));
+/**
+ * Pairs of letters that AutoCAD keeps as two layers but its AUDIT reports as a
+ * duplicate name, written `from>to` in hexadecimal after `layerKey` has
+ * lower-cased the name. They include the two lower-case sigmas σ and ς.
+ */
+const AUDIT_SAME_PAIRS = "178>ff 1c6>1c5 1c9>1c8 1cc>1cb 1f3>1f2 3c3>3c2 3f5>3b5 527>526 1e9e>df 1fbe>3b9 " +
+    "2c7e>23f 2c7f>240 2cec>2ceb 2cee>2ced a791>a790 a7a1>a7a0 a7a3>a7a2 a7a5>a7a4 " +
+    "a7a7>a7a6 a7a9>a7a8";
+const AUDIT_SAME = new Map(AUDIT_SAME_PAIRS.split(" ").map((pair) => {
+    const [from = "", to = ""] = pair.split(">");
+    return [String.fromCharCode(parseInt(from, 16)), String.fromCharCode(parseInt(to, 16))];
+}));
+/**
+ * Letters that AUDIT takes for the two or three letters they stand for, in
+ * either letter case: it reports `straße` and `STRASSE` as a duplicate name,
+ * and `Þórr` and `Thórr`. Each is listed in lower case, as `layerKey` leaves
+ * it, with a title-case digraph beside its lower-case form.
+ */
+const AUDIT_SPELLED_OUT = new Map(Object.entries({
+    ß: "ss",
+    ẞ: "ss",
+    æ: "ae",
+    ᴂ: "ae",
+    œ: "oe",
+    ij: "ij",
+    þ: "th",
+    dž: "dž",
+    Dž: "dž",
+    lj: "lj",
+    Lj: "lj",
+    nj: "nj",
+    Nj: "nj",
+    dz: "dz",
+    Dz: "dz",
+    ff: "ff",
+    fi: "fi",
+    fl: "fl",
+    ffi: "ffi",
+    ffl: "ffl",
+    st: "st",
+    ȸ: "db",
+    ȹ: "qp",
+    ʪ: "ls",
+    ʫ: "lz",
+    ꜳ: "aa",
+    ꜵ: "ao",
+    ꜷ: "au",
+    ꜹ: "av",
+    ꜽ: "ay",
+    ꝏ: "oo",
+    // The key is compared in decomposed form, so `ž` is spelled as it decomposes.
+}).map(([letter, spelling]) => [letter, spelling.normalize("NFD")]));
+/**
+ * Composed characters that AUDIT does not take for their decomposed forms,
+ * though Unicode calls the two equivalent: Hangul syllables, and some Arabic,
+ * Indic, Myanmar, kana, Hebrew and CJK compatibility characters. AUDIT takes
+ * every other composed character below U+10000 for its decomposed form.
+ */
+const KEPT_COMPOSED = /([\u0622-\u0624\u0626\u06c0\u06c2\u06d3\u09cb\u09cc\u09df\u0b48\u0b4b\u0b4c\u0b94\u0bca-\u0bcc\u0c48\u0cc0\u0cc7\u0cc8\u0cca\u0ccb\u0d4a-\u0d4c\u0dda\u0ddc-\u0dde\u1026\u309e\u30fe\ufa2e\ufa2f\ufa6b\ufa6d\ufb1f\ufb2c\ufb2d\uac00-\ud7a3])/;
+const SOFT_HYPHEN = "\u00ad";
+/**
+ * Soft hyphens that AUDIT ignores. It does not ignore one in front of a
+ * combining mark or a Hangul jamo: `E`, a soft hyphen and a combining acute
+ * accent are not É to it.
+ */
+const IGNORED_SOFT_HYPHENS = /\u00ad+(?![\u00ad\p{M}\u1100-\u11ff\ua960-\ua97f\ud7b0-\ud7ff])/gu;
+/**
+ * The form of a layer name that AutoCAD looks layers up by. Two names with the
+ * same key are one layer to AutoCAD: an entity on `wall` goes on a layer
+ * declared as `WALL`, and AutoCAD keeps only the first of two such layers.
+ *
+ * AutoCAD lower-cases one character at a time from its own table, so this is
+ * not `toLowerCase()`: a final sigma ς, a dotless ı and ß stay as they are.
+ *
+ * @param name - The layer name.
+ * @returns The key to compare layer names by.
+ */
+export function layerKey(name) {
+    let key = "";
+    for (let i = 0; i < name.length; i++) {
+        const character = name.charAt(i);
+        key += FOLDED.has(name.charCodeAt(i)) ? character.toLowerCase() : character;
+    }
+    return key;
+}
+/**
+ * The form of a layer name that AutoCAD's AUDIT compares when it looks for
+ * duplicate names. AUDIT takes more names for the same than the layer table
+ * does, so two layers can have different `layerKey`s and still be an AUDIT
+ * error. Two names with the same key here are such a pair, unless they have
+ * the same `layerKey` too.
+ *
+ * The key follows the kinds of pair measured in AutoCAD 2025:
+ *
+ * - A few single letters, such as σ and ς.
+ * - A letter and the letters it stands for, such as ß and `ss`.
+ * - A composed character and its decomposed form, such as é and `e` with a
+ *   combining acute accent, with its marks in any order Unicode counts as the
+ *   same, such as a dot below before or after a circumflex.
+ * - A name with a soft hyphen inside it or in front of it and the same name
+ *   without.
+ *
+ * It is not AUDIT's whole comparison. AUDIT also takes some compatibility
+ * characters for their plain forms, and cannot tell two characters apart when
+ * it knows neither.
+ *
+ * @param name - The layer name.
+ * @returns The key to find AUDIT's duplicate names by.
+ */
+export function layerAuditKey(name) {
+    let key = "";
+    for (const character of layerKey(decomposed(name.replace(IGNORED_SOFT_HYPHENS, "")))) {
+        key += AUDIT_SPELLED_OUT.get(character) ?? AUDIT_SAME.get(character) ?? character;
+    }
+    // AUDIT does not report `coop` and `coop` with a soft hyphen after it as duplicates, though it
+    // does report some other pairs that differ by a soft hyphen at the end. A mark for one at the
+    // end keeps a name that ends with a soft hyphen apart from every name that does not. Two names
+    // that both end with one are compared like any others, as the pairs in `auditPairs` in
+    // `scripts/cad-check.ts` check.
+    return name.endsWith(SOFT_HYPHEN) ? key + SOFT_HYPHEN : key;
+}
+/** Decomposes every composed character that AUDIT takes for its decomposed form. */
+function decomposed(name) {
+    return name
+        .split(KEPT_COMPOSED)
+        .map((part, i) => (i % 2 === 1 ? part : part.normalize("NFD")))
+        .join("");
+}
+/**
+ * Orders layers for a DXF layer table. AutoCAD's AUDIT reports "Layer zero name
+ * found at incorrect index" when layer `0` is not the first record.
+ *
+ * @param layers - The drawing's layers, in any order.
+ * @returns The layers with `0` first and the others in their given order.
+ */
+export function layerZeroFirst(layers) {
+    return [...layers.filter((l) => l.name === "0"), ...layers.filter((l) => l.name !== "0")];
+}

package/dist/lint.d.ts

@@ -23,8 +23,17 @@ export interface LintOptions {
  * exported as a different version than it was built for, and for warnings.
  */
 export declare function lint(drawing: Drawing, options?: LintOptions): Diagnostic[];
-/** Thrown by `toDXF` when a drawing has lint errors for the version being written. */
+/**
+ * An error that refuses a drawing because of what `lint` found in it. `toDXF`
+ * throws it when a drawing has lint errors for the version being written, and
+ * other code can throw it to refuse a drawing for its own purpose. Its message
+ * lists the first 10 problems and names no file format.
+ */
 export declare class DrawingError extends Error {
+    /** Every problem the drawing was refused for, including those the message leaves out. */
     readonly diagnostics: readonly Diagnostic[];
+    /**
+     * @param diagnostics - The problems to refuse the drawing for, as `lint` returns them.
+     */
     constructor(diagnostics: readonly Diagnostic[]);
 }

package/dist/lint.js

@@ -1,4 +1,6 @@
-import { layerColorProblem, layerNameProblem, textProblem } from "./rules.js";
+import { written } from "./format.js";
+import { layerAuditKey, layerKey } from "./layers.js";
+import { arcIsWrittenAsPoint, arcProblem, layerColorProblem, layerNameProblem, layerTwinProblem, magnitudeProblem, sizeProblem, textProblem, textWarning, } from "./rules.js";
 /**
  * Checks a drawing against the rules AutoCAD enforces when it opens DXF.
  *
@@ -17,7 +19,9 @@ export function lint(drawing, options = {}) {
             message: `Unknown units: ${JSON.stringify(drawing.units)}`,
         });
     }
+    // AutoCAD looks layers up by one form of their names, and AUDIT compares another.
     const seen = new Set();
+    const audited = new Map();
     for (const layer of drawing.layers) {
         const error = (rule, message) => out.push({ rule, severity: "error", message, layer: layer.name });
         const nameProblem = layerNameProblem(layer.name, version);
@@ -26,40 +30,68 @@ export function lint(drawing, options = {}) {
         const colorProblem = layerColorProblem(layer.color);
         if (colorProblem)
             error("layer-color", `Layer ${JSON.stringify(layer.name)}: ${colorProblem}`);
-        const key = layer.name.toLowerCase();
+        const key = layerKey(layer.name);
+        const auditKey = layerAuditKey(layer.name);
+        const twinProblem = layerTwinProblem(layer.name, audited.get(auditKey) ?? layer.name);
         if (seen.has(key)) {
             error("duplicate-layer", `Layer ${JSON.stringify(layer.name)} is defined twice. CAD ignores case in layer names`);
         }
+        else if (twinProblem) {
+            error("duplicate-layer", `Layer ${JSON.stringify(layer.name)}: ${twinProblem}`);
+        }
         seen.add(key);
+        if (!audited.has(auditKey))
+            audited.set(auditKey, layer.name);
     }
     if (!seen.has("0")) {
         out.push({ rule: "undefined-layer", severity: "error", message: 'Layer "0" is missing' });
     }
     drawing.entities.forEach((entity, index) => {
         const add = (rule, severity, problem) => out.push({ rule, severity, message: `${entity.kind} #${index}: ${problem}`, entity: index });
-        if (!seen.has(entity.layer.toLowerCase())) {
-            add("undefined-layer", "error", `layer ${JSON.stringify(entity.layer)} is not defined`);
+        if (!seen.has(layerKey(entity.layer))) {
+            // AutoCAD adds a layer for a name it does not know. When AUDIT takes that name for a
+            // declared layer's, it then reports the new layer as a duplicate of it.
+            const twin = audited.get(layerAuditKey(entity.layer));
+            const hint = twin
+                ? `. AutoCAD does not take it for layer ${JSON.stringify(twin)}: it would add a layer, and its AUDIT would report a duplicate name`
+                : "";
+            add("undefined-layer", "error", `layer ${JSON.stringify(entity.layer)} is not defined${hint}`);
         }
-        for (const problem of geometryProblems(entity))
+        const problems = geometryProblems(entity);
+        for (const problem of problems)
             add("geometry", "error", problem);
         if (entity.kind === "text") {
             const problem = textProblem(entity.value);
             if (problem)
                 add("text", "error", problem);
+            const warning = textWarning(entity.value);
+            if (warning)
+                add("text", "warning", warning);
         }
-        if (entity.kind === "line" && same(entity.from, entity.to)) {
-            add("zero-length", "warning", "the line has no length");
-        }
+        // A shape with a geometry error has no length worth a second message.
+        const collapsed = problems.length === 0 ? zeroLength(entity) : undefined;
+        if (collapsed)
+            add("zero-length", "warning", collapsed);
     });
     return out;
 }
-/** Thrown by `toDXF` when a drawing has lint errors for the version being written. */
+/**
+ * An error that refuses a drawing because of what `lint` found in it. `toDXF`
+ * throws it when a drawing has lint errors for the version being written, and
+ * other code can throw it to refuse a drawing for its own purpose. Its message
+ * lists the first 10 problems and names no file format.
+ */
 export class DrawingError extends Error {
+    /** Every problem the drawing was refused for, including those the message leaves out. */
     diagnostics;
+    /**
+     * @param diagnostics - The problems to refuse the drawing for, as `lint` returns them.
+     */
     constructor(diagnostics) {
+        const count = diagnostics.length === 1 ? "1 problem" : `${diagnostics.length} problems`;
         const shown = diagnostics.slice(0, 10).map((d) => `- ${d.message}`);
         const more = diagnostics.length > 10 ? [`- and ${diagnostics.length - 10} more`] : [];
-        super(["The drawing cannot be written as DXF:", ...shown, ...more].join("\n"));
+        super([`The drawing has ${count}:`, ...shown, ...more].join("\n"));
         this.name = "DrawingError";
         this.diagnostics = diagnostics;
     }
@@ -67,12 +99,18 @@ export class DrawingError extends Error {
 function geometryProblems(e) {
     const out = [];
     const finite = (label, ...values) => {
-        if (!values.every(Number.isFinite))
+        if (!values.every(Number.isFinite)) {
             out.push(`${label} must be finite numbers`);
+            return;
+        }
+        const problem = values.map(magnitudeProblem).find((p) => p !== undefined);
+        if (problem)
+            out.push(`${label}: ${problem}`);
     };
-    const positive = (label, value) => {
-        if (!(Number.isFinite(value) && value > 0))
-            out.push(`${label} must be greater than 0`);
+    const size = (label, value) => {
+        const problem = Number.isFinite(value) ? sizeProblem(value) : "This value must be finite";
+        if (problem)
+            out.push(`${label}: ${problem}`);
     };
     switch (e.kind) {
         case "line":
@@ -81,29 +119,76 @@ function geometryProblems(e) {
         case "polyline":
             if (e.points.length < 2)
                 out.push("a polyline needs at least 2 points");
-            finite("its points", ...e.points.flat());
+            // A loop, because a polyline can have more points than a call can take arguments.
+            if (!e.points.every((p) => Number.isFinite(p[0]) && Number.isFinite(p[1]))) {
+                out.push("its points must be finite numbers");
+            }
+            else {
+                for (const [x, y] of e.points) {
+                    const problem = magnitudeProblem(x) ?? magnitudeProblem(y);
+                    if (!problem)
+                        continue;
+                    out.push(`its points: ${problem}`);
+                    break;
+                }
+            }
             break;
         case "circle":
             finite("its center", ...e.center);
-            positive("its radius", e.radius);
+            size("radius", e.radius);
             break;
         case "arc":
             finite("its center", ...e.center);
-            positive("its radius", e.radius);
+            size("radius", e.radius);
             if (![e.startAngle, e.endAngle].every((a) => Number.isFinite(a) && a >= 0 && a < 360)) {
                 out.push("its angles must be from 0 up to 360");
             }
             else if (e.startAngle === e.endAngle) {
                 out.push("its start and end angles must differ");
             }
+            else {
+                const problem = arcProblem(e.startAngle, e.endAngle);
+                if (problem)
+                    out.push(problem);
+            }
             break;
         case "text":
             finite("its position and rotation", ...e.at, e.rotation);
-            positive("its height", e.height);
+            size("height", e.height);
             break;
     }
     return out;
 }
+/** Says how a valid entity ends up with no length in the file, or returns undefined when it has one. */
+function zeroLength(e) {
+    const rounded = "once it is rounded to the 6 decimals tsdraft writes";
+    switch (e.kind) {
+        case "line":
+            if (same(e.from, e.to))
+                return "the line has no length";
+            return sameWritten(e.from, e.to) ? `the line has no length ${rounded}` : undefined;
+        case "polyline": {
+            const [first] = e.points;
+            if (!first)
+                return undefined;
+            if (e.points.every((p) => same(p, first)))
+                return "the polyline has no length";
+            return e.points.every((p) => sameWritten(p, first))
+                ? `the polyline has no length ${rounded}`
+                : undefined;
+        }
+        case "arc":
+            return arcIsWrittenAsPoint(e.startAngle, e.endAngle)
+                ? `the arc has no length ${rounded}`
+                : undefined;
+        case "circle":
+        case "text":
+            return undefined;
+    }
+}
 function same(a, b) {
     return a[0] === b[0] && a[1] === b[1];
 }
+function sameWritten(a, b) {
+    return written(a[0]) === written(b[0]) && written(a[1]) === written(b[1]);
+}