tntd 1.4.30 → 1.4.32

package/common/temp/rush-recycler/install-run-1678274025679/@rushstack/node-core-library/dist/node-core-library.d.ts

@@ -1,3717 +0,0 @@
-/**
- * Core libraries that every NodeJS toolchain project should use.
- *
- * @packageDocumentation
- */
-
-/// <reference types="node" />
-
-import * as child_process from 'child_process';
-import * as fs from 'fs';
-
-/**
- * Specifies the behavior of APIs such as {@link FileSystem.copyFile} or
- * {@link FileSystem.createSymbolicLinkFile} when the output file path already exists.
- *
- * @remarks
- * For {@link FileSystem.copyFile} and related APIs, the "output file path" is
- * {@link IFileSystemCopyFileOptions.destinationPath}.
- *
- * For {@link FileSystem.createSymbolicLinkFile} and related APIs, the "output file path" is
- * {@link IFileSystemCreateLinkOptions.newLinkPath}.
- *
- * @public
- */
-export declare enum AlreadyExistsBehavior {
-    /**
-     * If the output file path already exists, try to overwrite the existing object.
-     *
-     * @remarks
-     * If overwriting the object would require recursively deleting a folder tree,
-     * then the operation will fail.  As an example, suppose {@link FileSystem.copyFile}
-     * is copying a single file `/a/b/c` to the destination path `/d/e`, and `/d/e` is a
-     * nonempty folder.  In this situation, an error will be reported; specifying
-     * `AlreadyExistsBehavior.Overwrite` does not help.  Empty folders can be overwritten
-     * depending on the details of the implementation.
-     */
-    Overwrite = "overwrite",
-    /**
-     * If the output file path already exists, the operation will fail, and an error
-     * will be reported.
-     */
-    Error = "error",
-    /**
-     * If the output file path already exists, skip this item, and continue the operation.
-     */
-    Ignore = "ignore"
-}
-
-/**
- * This exception can be thrown to indicate that an operation failed and an error message has already
- * been reported appropriately. Thus, the catch handler does not have responsibility for reporting
- * the error.
- *
- * @remarks
- * For example, suppose a tool writes interactive output to `console.log()`.  When an exception is thrown,
- * the `catch` handler will typically provide simplistic reporting such as this:
- *
- * ```ts
- * catch (error) {
- *   console.log("ERROR: " + error.message);
- * }
- * ```
- *
- * Suppose that the code performing the operation normally prints rich output to the console.  It may be able to
- * present an error message more nicely (for example, as part of a table, or structured log format).  Throwing
- * `AlreadyReportedError` provides a way to use exception handling to abort the operation, but instruct the `catch`
- * handler not to print an error a second time:
- *
- * ```ts
- * catch (error) {
- *   if (error instanceof AlreadyReportedError) {
- *     return;
- *   }
- *   console.log("ERROR: " + error.message);
- * }
- * ```
- *
- * @public
- */
-export declare class AlreadyReportedError extends Error {
-    constructor();
-    static [Symbol.hasInstance](instance: object): boolean;
-}
-
-/**
- * Operations for working with text strings that contain
- * {@link https://en.wikipedia.org/wiki/ANSI_escape_code | ANSI escape codes}.
- * The most commonly used escape codes set the foreground/background color for console output.
- * @public
- */
-export declare class AnsiEscape {
-    private static readonly _csiRegExp;
-    private static readonly _sgrRegExp;
-    private static readonly _backslashNRegExp;
-    private static readonly _backslashRRegExp;
-    /**
-     * Returns the input text with all ANSI escape codes removed.  For example, this is useful when saving
-     * colorized console output to a log file.
-     */
-    static removeCodes(text: string): string;
-    /**
-     * Replaces ANSI escape codes with human-readable tokens.  This is useful for unit tests
-     * that compare text strings in test assertions or snapshot files.
-     */
-    static formatForTests(text: string, options?: IAnsiEscapeConvertForTestsOptions): string;
-    private static _tryGetSgrFriendlyName;
-}
-
-/**
- * Utilities for parallel asynchronous operations, for use with the system `Promise` APIs.
- *
- * @beta
- */
-export declare class Async {
-    /**
-     * Given an input array and a `callback` function, invoke the callback to start a
-     * promise for each element in the array.  Returns an array containing the results.
-     *
-     * @remarks
-     * This API is similar to the system `Array#map`, except that the loop is asynchronous,
-     * and the maximum number of concurrent promises can be throttled
-     * using {@link IAsyncParallelismOptions.concurrency}.
-     *
-     * If `callback` throws a synchronous exception, or if it returns a promise that rejects,
-     * then the loop stops immediately.  Any remaining array items will be skipped, and
-     * overall operation will reject with the first error that was encountered.
-     *
-     * @param iterable - the array of inputs for the callback function
-     * @param callback - a function that starts an asynchronous promise for an element
-     *   from the array
-     * @param options - options for customizing the control flow
-     * @returns an array containing the result for each callback, in the same order
-     *   as the original input `array`
-     */
-    static mapAsync<TEntry, TRetVal>(iterable: Iterable<TEntry> | AsyncIterable<TEntry>, callback: (entry: TEntry, arrayIndex: number) => Promise<TRetVal>, options?: IAsyncParallelismOptions | undefined): Promise<TRetVal[]>;
-    /**
-     * Given an input array and a `callback` function, invoke the callback to start a
-     * promise for each element in the array.
-     *
-     * @remarks
-     * This API is similar to the system `Array#forEach`, except that the loop is asynchronous,
-     * and the maximum number of concurrent promises can be throttled
-     * using {@link IAsyncParallelismOptions.concurrency}.
-     *
-     * If `callback` throws a synchronous exception, or if it returns a promise that rejects,
-     * then the loop stops immediately.  Any remaining array items will be skipped, and
-     * overall operation will reject with the first error that was encountered.
-     *
-     * @param iterable - the array of inputs for the callback function
-     * @param callback - a function that starts an asynchronous promise for an element
-     *   from the array
-     * @param options - options for customizing the control flow
-     */
-    static forEachAsync<TEntry>(iterable: Iterable<TEntry> | AsyncIterable<TEntry>, callback: (entry: TEntry, arrayIndex: number) => Promise<void>, options?: IAsyncParallelismOptions | undefined): Promise<void>;
-    /**
-     * Return a promise that resolves after the specified number of milliseconds.
-     */
-    static sleep(ms: number): Promise<void>;
-    /**
-     * Executes an async function and optionally retries it if it fails.
-     */
-    static runWithRetriesAsync<TResult>({ action, maxRetries, retryDelayMs }: IRunWithRetriesOptions<TResult>): Promise<TResult>;
-}
-
-/**
- * A "branded type" is a primitive type with a compile-type key that makes it incompatible with other
- * aliases for the primitive type.
- *
- * @remarks
- *
- * Example usage:
- *
- * ```ts
- * // PhoneNumber is a branded type based on the "string" primitive.
- * type PhoneNumber = Brand<string, 'PhoneNumber'>;
- *
- * function createPhoneNumber(input: string): PhoneNumber {
- *   if (!/\d+(\-\d+)+/.test(input)) {
- *     throw new Error('Invalid phone number: ' + JSON.stringify(input));
- *   }
- *   return input as PhoneNumber;
- * }
- *
- * const p1: PhoneNumber = createPhoneNumber('123-456-7890');
- *
- * // PhoneNumber is a string and can be used as one:
- * const p2: string = p1;
- *
- * // But an arbitrary string cannot be implicitly type cast as PhoneNumber.
- * // ERROR: Type 'string' is not assignable to type 'PhoneNumber'
- * const p3: PhoneNumber = '123-456-7890';
- * ```
- *
- * For more information about this pattern, see {@link
- * https://github.com/Microsoft/TypeScript/blob/7b48a182c05ea4dea81bab73ecbbe9e013a79e99/src/compiler/types.ts#L693-L698
- * | this comment} explaining the TypeScript compiler's introduction of this pattern, and
- * {@link https://spin.atomicobject.com/2018/01/15/typescript-flexible-nominal-typing/ | this article}
- * explaining the technique in depth.
- *
- * @public
- */
-export declare type Brand<T, BrandTag extends string> = T & {
-    __brand: BrandTag;
-};
-
-/**
- * The static functions on this class are used to produce colored text
- * for use with the node-core-library terminal.
- *
- * @example
- * terminal.writeLine(Colors.green('Green Text!'), ' ', Colors.blue('Blue Text!'));
- *
- * @beta
- */
-export declare class Colors {
-    static black(text: string | IColorableSequence): IColorableSequence;
-    static red(text: string | IColorableSequence): IColorableSequence;
-    static green(text: string | IColorableSequence): IColorableSequence;
-    static yellow(text: string | IColorableSequence): IColorableSequence;
-    static blue(text: string | IColorableSequence): IColorableSequence;
-    static magenta(text: string | IColorableSequence): IColorableSequence;
-    static cyan(text: string | IColorableSequence): IColorableSequence;
-    static white(text: string | IColorableSequence): IColorableSequence;
-    static gray(text: string | IColorableSequence): IColorableSequence;
-    static blackBackground(text: string | IColorableSequence): IColorableSequence;
-    static redBackground(text: string | IColorableSequence): IColorableSequence;
-    static greenBackground(text: string | IColorableSequence): IColorableSequence;
-    static yellowBackground(text: string | IColorableSequence): IColorableSequence;
-    static blueBackground(text: string | IColorableSequence): IColorableSequence;
-    static magentaBackground(text: string | IColorableSequence): IColorableSequence;
-    static cyanBackground(text: string | IColorableSequence): IColorableSequence;
-    static whiteBackground(text: string | IColorableSequence): IColorableSequence;
-    static grayBackground(text: string | IColorableSequence): IColorableSequence;
-    static bold(text: string | IColorableSequence): IColorableSequence;
-    static dim(text: string | IColorableSequence): IColorableSequence;
-    static underline(text: string | IColorableSequence): IColorableSequence;
-    static blink(text: string | IColorableSequence): IColorableSequence;
-    static invertColor(text: string | IColorableSequence): IColorableSequence;
-    static hidden(text: string | IColorableSequence): IColorableSequence;
-    /**
-     * If called with a string, returns the string wrapped in a {@link IColorableSequence}.
-     * If called with a {@link IColorableSequence}, returns the {@link IColorableSequence}.
-     *
-     * @internal
-     */
-    static _normalizeStringOrColorableSequence(value: string | IColorableSequence): IColorableSequence;
-    private static _applyTextAttribute;
-}
-
-/**
- * Colors used with {@link IColorableSequence}.
- * @beta
- */
-export declare enum ColorValue {
-    Black = 0,
-    Red = 1,
-    Green = 2,
-    Yellow = 3,
-    Blue = 4,
-    Magenta = 5,
-    Cyan = 6,
-    White = 7,
-    Gray = 8
-}
-
-/**
- * Terminal provider that prints to STDOUT (for log- and verbose-level messages) and
- * STDERR (for warning- and error-level messsages).
- *
- * @beta
- */
-export declare class ConsoleTerminalProvider implements ITerminalProvider {
-    /**
-     * If true, verbose-level messages should be written to the console.
-     */
-    verboseEnabled: boolean;
-    /**
-     * If true, debug-level messages should be written to the console.
-     */
-    debugEnabled: boolean;
-    constructor(options?: Partial<IConsoleTerminalProviderOptions>);
-    /**
-     * {@inheritDoc ITerminalProvider.write}
-     */
-    write(data: string, severity: TerminalProviderSeverity): void;
-    /**
-     * {@inheritDoc ITerminalProvider.eolCharacter}
-     */
-    get eolCharacter(): string;
-    /**
-     * {@inheritDoc ITerminalProvider.supportsColor}
-     */
-    get supportsColor(): boolean;
-}
-
-/**
- * The allowed types of encodings, as supported by Node.js
- * @public
- */
-export declare enum Encoding {
-    Utf8 = "utf8"
-}
-
-/**
- * A helper for looking up TypeScript `enum` keys/values.
- *
- * @remarks
- * TypeScript enums implement a lookup table for mapping between their keys and values:
- *
- * ```ts
- * enum Colors {
- *   Red = 1
- * }
- *
- * // Prints "Red"
- * console.log(Colors[1]);
- *
- * // Prints "1"
- * console.log(Colors["Red]);
- * ```
- *
- * However the compiler's "noImplicitAny" validation has trouble with these mappings, because
- * there are so many possible types for the map elements:
- *
- * ```ts
- * function f(s: string): Colors | undefined {
- *   // (TS 7015) Element implicitly has an 'any' type because
- *   // index expression is not of type 'number'.
- *   return Colors[s];
- * }
- * ```
- *
- * The `Enum` helper provides a more specific, strongly typed way to access members:
- *
- * ```ts
- * function f(s: string): Colors | undefined {
- *   return Enum.tryGetValueByKey(Colors, s);
- * }
- * ```
- *
- * @public
- */
-export declare class Enum {
-    private constructor();
-    /**
-     * Returns an enum value, given its key. Returns `undefined` if no matching key is found.
-     *
-     * @example
-     *
-     * Example usage:
-     * ```ts
-     * enum Colors {
-     *   Red = 1
-     * }
-     *
-     * // Prints "1"
-     * console.log(Enum.tryGetValueByKey(Colors, "Red"));
-     *
-     * // Prints "undefined"
-     * console.log(Enum.tryGetValueByKey(Colors, "Black"));
-     * ```
-     */
-    static tryGetValueByKey<TEnumValue>(enumObject: {
-        [key: string]: TEnumValue | string;
-        [key: number]: TEnumValue | string;
-    }, key: string): TEnumValue | undefined;
-    /**
-     * This API is similar to {@link Enum.tryGetValueByKey}, except that it throws an exception
-     * if the key is undefined.
-     */
-    static getValueByKey<TEnumValue>(enumObject: {
-        [key: string]: TEnumValue | string;
-        [key: number]: TEnumValue | string;
-    }, key: string): TEnumValue;
-    /**
-     * Returns an enum string key, given its numeric value.  Returns `undefined` if no matching value
-     * is found.
-     *
-     * @remarks
-     * The TypeScript compiler only creates a reverse mapping for enum members whose value is numeric.
-     * For example:
-     *
-     * ```ts
-     * enum E {
-     *   A = 1,
-     *   B = 'c'
-     * }
-     *
-     * // Prints "A"
-     * console.log(E[1]);
-     *
-     * // Prints "undefined"
-     * console.log(E["c"]);
-     * ```
-     *
-     * @example
-     *
-     * Example usage:
-     * ```ts
-     * enum Colors {
-     *   Red = 1,
-     *   Blue = 'blue'
-     * }
-     *
-     * // Prints "Red"
-     * console.log(Enum.tryGetKeyByNumber(Colors, 1));
-     *
-     * // Prints "undefined"
-     * console.log(Enum.tryGetKeyByNumber(Colors, -1));
-     * ```
-     */
-    static tryGetKeyByNumber<TEnumValue, TEnumObject extends {
-        [key: string]: TEnumValue;
-    }>(enumObject: TEnumObject, value: number): keyof typeof enumObject | undefined;
-    /**
-     * This API is similar to {@link Enum.tryGetKeyByNumber}, except that it throws an exception
-     * if the key is undefined.
-     */
-    static getKeyByNumber<TEnumValue, TEnumObject extends {
-        [key: string]: TEnumValue;
-    }>(enumObject: TEnumObject, value: number): keyof typeof enumObject;
-}
-
-/**
- * A map data structure that stores process environment variables.  On Windows
- * operating system, the variable names are case-insensitive.
- * @public
- */
-export declare class EnvironmentMap {
-    private readonly _map;
-    /**
-     * Whether the environment variable names are case-sensitive.
-     *
-     * @remarks
-     * On Windows operating system, environment variables are case-insensitive.
-     * The map will preserve the variable name casing from the most recent assignment operation.
-     */
-    readonly caseSensitive: boolean;
-    constructor(environmentObject?: Record<string, string | undefined>);
-    /**
-     * Clears all entries, resulting in an empty map.
-     */
-    clear(): void;
-    /**
-     * Assigns the variable to the specified value.  A previous value will be overwritten.
-     *
-     * @remarks
-     * The value can be an empty string.  To completely remove the entry, use
-     * {@link EnvironmentMap.unset} instead.
-     */
-    set(name: string, value: string): void;
-    /**
-     * Removes the key from the map, if present.
-     */
-    unset(name: string): void;
-    /**
-     * Returns the value of the specified variable, or `undefined` if the map does not contain that name.
-     */
-    get(name: string): string | undefined;
-    /**
-     * Returns the map keys, which are environment variable names.
-     */
-    names(): IterableIterator<string>;
-    /**
-     * Returns the map entries.
-     */
-    entries(): IterableIterator<IEnvironmentEntry>;
-    /**
-     * Adds each entry from `environmentMap` to this map.
-     */
-    mergeFrom(environmentMap: EnvironmentMap): void;
-    /**
-     * Merges entries from a plain JavaScript object, such as would be used with the `process.env` API.
-     */
-    mergeFromObject(environmentObject?: Record<string, string | undefined>): void;
-    /**
-     * Returns the keys as a plain JavaScript object similar to the object returned by the `process.env` API.
-     */
-    toObject(): Record<string, string>;
-}
-
-/**
- * The Executable class provides a safe, portable, recommended solution for tools that need
- * to launch child processes.
- *
- * @remarks
- * The NodeJS child_process API provides a solution for launching child processes, however
- * its design encourages reliance on the operating system shell for certain features.
- * Invoking the OS shell is not safe, not portable, and generally not recommended:
- *
- * - Different shells have different behavior and command-line syntax, and which shell you
- *   will get with NodeJS is unpredictable.  There is no universal shell guaranteed to be
- *   available on all platforms.
- *
- * - If a command parameter contains symbol characters, a shell may interpret them, which
- *   can introduce a security vulnerability
- *
- * - Each shell has different rules for escaping these symbols.  On Windows, the default
- *   shell is incapable of escaping certain character sequences.
- *
- * The Executable API provides a pure JavaScript implementation of primitive shell-like
- * functionality for searching the default PATH, appending default file extensions on Windows,
- * and executing a file that may contain a POSIX shebang.  This primitive functionality
- * is sufficient (and recommended) for most tooling scenarios.
- *
- * If you need additional shell features such as wildcard globbing, environment variable
- * expansion, piping, or built-in commands, then we recommend to use the `@microsoft/rushell`
- * library instead.  Rushell is a pure JavaScript shell with a standard syntax that is
- * guaranteed to work consistently across all platforms.
- *
- * @public
- */
-export declare class Executable {
-    /**
-     * Synchronously create a child process and optionally capture its output.
-     *
-     * @remarks
-     * This function is similar to child_process.spawnSync().  The main differences are:
-     *
-     * - It does not invoke the OS shell unless the executable file is a shell script.
-     * - Command-line arguments containing special characters are more accurately passed
-     *   through to the child process.
-     * - If the filename is missing a path, then the shell's default PATH will be searched.
-     * - If the filename is missing a file extension, then Windows default file extensions
-     *   will be searched.
-     *
-     * @param filename - The name of the executable file.  This string must not contain any
-     * command-line arguments.  If the name contains any path delimiters, then the shell's
-     * default PATH will not be searched.
-     * @param args - The command-line arguments to be passed to the process.
-     * @param options - Additional options
-     * @returns the same data type as returned by the NodeJS child_process.spawnSync() API
-     *
-     * @privateRemarks
-     *
-     * NOTE: The NodeJS spawnSync() returns SpawnSyncReturns<string> or SpawnSyncReturns<Buffer>
-     * polymorphically based on the options.encoding parameter value.  This is a fairly confusing
-     * design.  In most cases, developers want string with the default encoding.  If/when someone
-     * wants binary output or a non-default text encoding, we will introduce a separate API function
-     * with a name like "spawnWithBufferSync".
-     */
-    static spawnSync(filename: string, args: string[], options?: IExecutableSpawnSyncOptions): child_process.SpawnSyncReturns<string>;
-    /**
-     * Start a child process.
-     *
-     * @remarks
-     * This function is similar to child_process.spawn().  The main differences are:
-     *
-     * - It does not invoke the OS shell unless the executable file is a shell script.
-     * - Command-line arguments containing special characters are more accurately passed
-     *   through to the child process.
-     * - If the filename is missing a path, then the shell's default PATH will be searched.
-     * - If the filename is missing a file extension, then Windows default file extensions
-     *   will be searched.
-     *
-     * This command is asynchronous, but it does not return a `Promise`.  Instead it returns
-     * a Node.js `ChildProcess` supporting event notifications.
-     *
-     * @param filename - The name of the executable file.  This string must not contain any
-     * command-line arguments.  If the name contains any path delimiters, then the shell's
-     * default PATH will not be searched.
-     * @param args - The command-line arguments to be passed to the process.
-     * @param options - Additional options
-     * @returns the same data type as returned by the NodeJS child_process.spawnSync() API
-     */
-    static spawn(filename: string, args: string[], options?: IExecutableSpawnOptions): child_process.ChildProcess;
-    private static _buildCommandLineFixup;
-    /**
-     * Given a filename, this determines the absolute path of the executable file that would
-     * be executed by a shell:
-     *
-     * - If the filename is missing a path, then the shell's default PATH will be searched.
-     * - If the filename is missing a file extension, then Windows default file extensions
-     *   will be searched.
-     *
-     * @remarks
-     *
-     * @param filename - The name of the executable file.  This string must not contain any
-     * command-line arguments.  If the name contains any path delimiters, then the shell's
-     * default PATH will not be searched.
-     * @param options - optional other parameters
-     * @returns the absolute path of the executable, or undefined if it was not found
-     */
-    static tryResolve(filename: string, options?: IExecutableResolveOptions): string | undefined;
-    private static _tryResolve;
-    private static _tryResolveFileExtension;
-    private static _buildEnvironmentMap;
-    /**
-     * This is used when searching the shell PATH for an executable, to determine
-     * whether a match should be skipped or not.  If it returns true, this does not
-     * guarantee that the file can be successfully executed.
-     */
-    private static _canExecute;
-    /**
-     * Returns the list of folders where we will search for an executable,
-     * based on the PATH environment variable.
-     */
-    private static _getSearchFolders;
-    private static _getExecutableContext;
-    /**
-     * Given an input string containing special symbol characters, this inserts the "^" escape
-     * character to ensure the symbols are interpreted literally by the Windows shell.
-     */
-    private static _getEscapedForWindowsShell;
-    /**
-     * Checks for characters that are unsafe to pass to a Windows batch file
-     * due to the way that cmd.exe implements escaping.
-     */
-    private static _validateArgsForWindowsShell;
-}
-
-/**
- * Types for {@link IExecutableSpawnSyncOptions.stdio}
- * and {@link IExecutableSpawnOptions.stdio}
- * @public
- */
-export declare type ExecutableStdioMapping = 'pipe' | 'ignore' | 'inherit' | ExecutableStdioStreamMapping[];
-
-/**
- * Typings for one of the streams inside IExecutableSpawnSyncOptions.stdio.
- * @public
- */
-export declare type ExecutableStdioStreamMapping = 'pipe' | 'ignore' | 'inherit' | NodeJS.WritableStream | NodeJS.ReadableStream | number | undefined;
-
-/**
- * String constants for common filenames and parts of filenames.
- *
- * @public
- */
-export declare enum FileConstants {
-    /**
-     * "package.json" - the configuration file that defines an NPM package
-     */
-    PackageJson = "package.json"
-}
-
-/**
- * An `Error` subclass that should be thrown to report an unexpected state that specifically references
- * a location in a file.
- *
- * @remarks The file path provided to the FileError constructor is expected to exist on disk. FileError
- * should not be used for reporting errors that are not in reference to an existing file.
- *
- * @public
- */
-export declare class FileError extends Error {
-    /** @internal */
-    static _sanitizedEnvironmentVariable: string | undefined;
-    /** @internal */
-    static _environmentVariableIsAbsolutePath: boolean;
-    private static _environmentVariableBasePathFnMap;
-    /** {@inheritdoc IFileErrorOptions.absolutePath} */
-    readonly absolutePath: string;
-    /** {@inheritdoc IFileErrorOptions.projectFolder} */
-    readonly projectFolder: string;
-    /** {@inheritdoc IFileErrorOptions.line} */
-    readonly line: number | undefined;
-    /** {@inheritdoc IFileErrorOptions.column} */
-    readonly column: number | undefined;
-    /**
-     * Constructs a new instance of the {@link FileError} class.
-     *
-     * @param message - A message describing the error.
-     * @param options - Options for the error.
-     */
-    constructor(message: string, options: IFileErrorOptions);
-    /**
-     * Get the Unix-formatted the error message.
-     *
-     * @override
-     */
-    toString(): string;
-    /**
-     * Get the formatted error message.
-     *
-     * @param options - Options for the error message format.
-     */
-    getFormattedErrorMessage(options?: IFileErrorFormattingOptions): string;
-    private _evaluateBaseFolder;
-    static [Symbol.hasInstance](instance: object): boolean;
-}
-
-/**
- * The format that the FileError message should conform to. The supported formats are:
- *  - Unix: `<path>:<line>:<column> - <message>`
- *  - VisualStudio: `<path>(<line>,<column>) - <message>`
- *
- * @public
- */
-export declare type FileLocationStyle = 'Unix' | 'VisualStudio';
-
-/**
- * The FileSystem API provides a complete set of recommended operations for interacting with the file system.
- *
- * @remarks
- * We recommend to use this instead of the native `fs` API, because `fs` is a minimal set of low-level
- * primitives that must be mapped for each supported operating system. The FileSystem API takes a
- * philosophical approach of providing "one obvious way" to do each operation. We also prefer synchronous
- * operations except in cases where there would be a clear performance benefit for using async, since synchronous
- * code is much easier to read and debug. Also, indiscriminate parallelism has been seen to actually worsen
- * performance, versus improving it.
- *
- * Note that in the documentation, we refer to "filesystem objects", this can be a
- * file, folder, symbolic link, hard link, directory junction, etc.
- *
- * @public
- */
-export declare class FileSystem {
-    /**
-     * Returns true if the path exists on disk.
-     * Behind the scenes it uses `fs.existsSync()`.
-     * @remarks
-     * There is a debate about the fact that after `fs.existsSync()` returns true,
-     * the file might be deleted before fs.readSync() is called, which would imply that everybody
-     * should catch a `readSync()` exception, and nobody should ever use `fs.existsSync()`.
-     * We find this to be unpersuasive, since "unexceptional exceptions" really hinder the
-     * break-on-exception debugging experience. Also, throwing/catching is generally slow.
-     * @param path - The absolute or relative path to the filesystem object.
-     */
-    static exists(path: string): boolean;
-    /**
-     * An async version of {@link FileSystem.exists}.
-     */
-    static existsAsync(path: string): Promise<boolean>;
-    /**
-     * Gets the statistics for a particular filesystem object.
-     * If the path is a link, this function follows the link and returns statistics about the link target.
-     * Behind the scenes it uses `fs.statSync()`.
-     * @param path - The absolute or relative path to the filesystem object.
-     */
-    static getStatistics(path: string): FileSystemStats;
-    /**
-     * An async version of {@link FileSystem.getStatistics}.
-     */
-    static getStatisticsAsync(path: string): Promise<FileSystemStats>;
-    /**
-     * Updates the accessed and modified timestamps of the filesystem object referenced by path.
-     * Behind the scenes it uses `fs.utimesSync()`.
-     * The caller should specify both times in the `times` parameter.
-     * @param path - The path of the file that should be modified.
-     * @param times - The times that the object should be updated to reflect.
-     */
-    static updateTimes(path: string, times: IFileSystemUpdateTimeParameters): void;
-    /**
-     * An async version of {@link FileSystem.updateTimes}.
-     */
-    static updateTimesAsync(path: string, times: IFileSystemUpdateTimeParameters): Promise<void>;
-    /**
-     * Changes the permissions (i.e. file mode bits) for a filesystem object.
-     * Behind the scenes it uses `fs.chmodSync()`.
-     * @param path - The absolute or relative path to the object that should be updated.
-     * @param modeBits - POSIX-style file mode bits specified using the {@link PosixModeBits} enum
-     */
-    static changePosixModeBits(path: string, mode: PosixModeBits): void;
-    /**
-     * An async version of {@link FileSystem.changePosixModeBits}.
-     */
-    static changePosixModeBitsAsync(path: string, mode: PosixModeBits): Promise<void>;
-    /**
-     * Retrieves the permissions (i.e. file mode bits) for a filesystem object.
-     * Behind the scenes it uses `fs.chmodSync()`.
-     * @param path - The absolute or relative path to the object that should be updated.
-     *
-     * @remarks
-     * This calls {@link FileSystem.getStatistics} to get the POSIX mode bits.
-     * If statistics in addition to the mode bits are needed, it is more efficient
-     * to call {@link FileSystem.getStatistics} directly instead.
-     */
-    static getPosixModeBits(path: string): PosixModeBits;
-    /**
-     * An async version of {@link FileSystem.getPosixModeBits}.
-     */
-    static getPosixModeBitsAsync(path: string): Promise<PosixModeBits>;
-    /**
-     * Returns a 10-character string representation of a PosixModeBits value similar to what
-     * would be displayed by a command such as "ls -l" on a POSIX-like operating system.
-     * @remarks
-     * For example, `PosixModeBits.AllRead | PosixModeBits.AllWrite` would be formatted as "-rw-rw-rw-".
-     * @param modeBits - POSIX-style file mode bits specified using the {@link PosixModeBits} enum
-     */
-    static formatPosixModeBits(modeBits: PosixModeBits): string;
-    /**
-     * Moves a file. The folder must exist, unless the `ensureFolderExists` option is provided.
-     * Behind the scenes it uses `fs-extra.moveSync()`
-     */
-    static move(options: IFileSystemMoveOptions): void;
-    /**
-     * An async version of {@link FileSystem.move}.
-     */
-    static moveAsync(options: IFileSystemMoveOptions): Promise<void>;
-    /**
-     * Recursively creates a folder at a given path.
-     * Behind the scenes is uses `fs-extra.ensureDirSync()`.
-     * @remarks
-     * Throws an exception if anything in the folderPath is not a folder.
-     * @param folderPath - The absolute or relative path of the folder which should be created.
-     */
-    static ensureFolder(folderPath: string): void;
-    /**
-     * An async version of {@link FileSystem.ensureFolder}.
-     */
-    static ensureFolderAsync(folderPath: string): Promise<void>;
-    /**
-     * @deprecated
-     * Use {@link FileSystem.readFolderItemNames} instead.
-     */
-    static readFolder(folderPath: string, options?: IFileSystemReadFolderOptions): string[];
-    /**
-     * @deprecated
-     * Use {@link FileSystem.readFolderItemNamesAsync} instead.
-     */
-    static readFolderAsync(folderPath: string, options?: IFileSystemReadFolderOptions): Promise<string[]>;
-    /**
-     * Reads the names of folder entries, not including "." or "..".
-     * Behind the scenes it uses `fs.readdirSync()`.
-     * @param folderPath - The absolute or relative path to the folder which should be read.
-     * @param options - Optional settings that can change the behavior. Type: `IReadFolderOptions`
-     */
-    static readFolderItemNames(folderPath: string, options?: IFileSystemReadFolderOptions): string[];
-    /**
-     * An async version of {@link FileSystem.readFolderItemNames}.
-     */
-    static readFolderItemNamesAsync(folderPath: string, options?: IFileSystemReadFolderOptions): Promise<string[]>;
-    /**
-     * Reads the contents of the folder, not including "." or "..", returning objects including the
-     * entry names and types.
-     * Behind the scenes it uses `fs.readdirSync()`.
-     * @param folderPath - The absolute or relative path to the folder which should be read.
-     * @param options - Optional settings that can change the behavior. Type: `IReadFolderOptions`
-     */
-    static readFolderItems(folderPath: string, options?: IFileSystemReadFolderOptions): FolderItem[];
-    /**
-     * An async version of {@link FileSystem.readFolderItems}.
-     */
-    static readFolderItemsAsync(folderPath: string, options?: IFileSystemReadFolderOptions): Promise<FolderItem[]>;
-    /**
-     * Deletes a folder, including all of its contents.
-     * Behind the scenes is uses `fs-extra.removeSync()`.
-     * @remarks
-     * Does not throw if the folderPath does not exist.
-     * @param folderPath - The absolute or relative path to the folder which should be deleted.
-     */
-    static deleteFolder(folderPath: string): void;
-    /**
-     * An async version of {@link FileSystem.deleteFolder}.
-     */
-    static deleteFolderAsync(folderPath: string): Promise<void>;
-    /**
-     * Deletes the content of a folder, but not the folder itself. Also ensures the folder exists.
-     * Behind the scenes it uses `fs-extra.emptyDirSync()`.
-     * @remarks
-     * This is a workaround for a common race condition, where the virus scanner holds a lock on the folder
-     * for a brief period after it was deleted, causing EBUSY errors for any code that tries to recreate the folder.
-     * @param folderPath - The absolute or relative path to the folder which should have its contents deleted.
-     */
-    static ensureEmptyFolder(folderPath: string): void;
-    /**
-     * An async version of {@link FileSystem.ensureEmptyFolder}.
-     */
-    static ensureEmptyFolderAsync(folderPath: string): Promise<void>;
-    /**
-     * Writes a text string to a file on disk, overwriting the file if it already exists.
-     * Behind the scenes it uses `fs.writeFileSync()`.
-     * @remarks
-     * Throws an error if the folder doesn't exist, unless ensureFolder=true.
-     * @param filePath - The absolute or relative path of the file.
-     * @param contents - The text that should be written to the file.
-     * @param options - Optional settings that can change the behavior. Type: `IWriteFileOptions`
-     */
-    static writeFile(filePath: string, contents: string | Buffer, options?: IFileSystemWriteFileOptions): void;
-    /**
-     * An async version of {@link FileSystem.writeFile}.
-     */
-    static writeFileAsync(filePath: string, contents: string | Buffer, options?: IFileSystemWriteFileOptions): Promise<void>;
-    /**
-     * Writes a text string to a file on disk, appending to the file if it already exists.
-     * Behind the scenes it uses `fs.appendFileSync()`.
-     * @remarks
-     * Throws an error if the folder doesn't exist, unless ensureFolder=true.
-     * @param filePath - The absolute or relative path of the file.
-     * @param contents - The text that should be written to the file.
-     * @param options - Optional settings that can change the behavior. Type: `IWriteFileOptions`
-     */
-    static appendToFile(filePath: string, contents: string | Buffer, options?: IFileSystemWriteFileOptions): void;
-    /**
-     * An async version of {@link FileSystem.appendToFile}.
-     */
-    static appendToFileAsync(filePath: string, contents: string | Buffer, options?: IFileSystemWriteFileOptions): Promise<void>;
-    /**
-     * Reads the contents of a file into a string.
-     * Behind the scenes it uses `fs.readFileSync()`.
-     * @param filePath - The relative or absolute path to the file whose contents should be read.
-     * @param options - Optional settings that can change the behavior. Type: `IReadFileOptions`
-     */
-    static readFile(filePath: string, options?: IFileSystemReadFileOptions): string;
-    /**
-     * An async version of {@link FileSystem.readFile}.
-     */
-    static readFileAsync(filePath: string, options?: IFileSystemReadFileOptions): Promise<string>;
-    /**
-     * Reads the contents of a file into a buffer.
-     * Behind the scenes is uses `fs.readFileSync()`.
-     * @param filePath - The relative or absolute path to the file whose contents should be read.
-     */
-    static readFileToBuffer(filePath: string): Buffer;
-    /**
-     * An async version of {@link FileSystem.readFileToBuffer}.
-     */
-    static readFileToBufferAsync(filePath: string): Promise<Buffer>;
-    /**
-     * Copies a single file from one location to another.
-     * By default, destinationPath is overwritten if it already exists.
-     *
-     * @remarks
-     * The `copyFile()` API cannot be used to copy folders.  It copies at most one file.
-     * Use {@link FileSystem.copyFiles} if you need to recursively copy a tree of folders.
-     *
-     * The implementation is based on `copySync()` from the `fs-extra` package.
-     */
-    static copyFile(options: IFileSystemCopyFileOptions): void;
-    /**
-     * An async version of {@link FileSystem.copyFile}.
-     */
-    static copyFileAsync(options: IFileSystemCopyFileOptions): Promise<void>;
-    /**
-     * Copies a file or folder from one location to another, recursively copying any folder contents.
-     * By default, destinationPath is overwritten if it already exists.
-     *
-     * @remarks
-     * If you only intend to copy a single file, it is recommended to use {@link FileSystem.copyFile}
-     * instead to more clearly communicate the intended operation.
-     *
-     * The implementation is based on `copySync()` from the `fs-extra` package.
-     */
-    static copyFiles(options: IFileSystemCopyFilesOptions): void;
-    /**
-     * An async version of {@link FileSystem.copyFiles}.
-     */
-    static copyFilesAsync(options: IFileSystemCopyFilesOptions): Promise<void>;
-    /**
-     * Deletes a file. Can optionally throw if the file doesn't exist.
-     * Behind the scenes it uses `fs.unlinkSync()`.
-     * @param filePath - The absolute or relative path to the file that should be deleted.
-     * @param options - Optional settings that can change the behavior. Type: `IDeleteFileOptions`
-     */
-    static deleteFile(filePath: string, options?: IFileSystemDeleteFileOptions): void;
-    /**
-     * An async version of {@link FileSystem.deleteFile}.
-     */
-    static deleteFileAsync(filePath: string, options?: IFileSystemDeleteFileOptions): Promise<void>;
-    /**
-     * Gets the statistics of a filesystem object. Does NOT follow the link to its target.
-     * Behind the scenes it uses `fs.lstatSync()`.
-     * @param path - The absolute or relative path to the filesystem object.
-     */
-    static getLinkStatistics(path: string): FileSystemStats;
-    /**
-     * An async version of {@link FileSystem.getLinkStatistics}.
-     */
-    static getLinkStatisticsAsync(path: string): Promise<FileSystemStats>;
-    /**
-     * If `path` refers to a symbolic link, this returns the path of the link target, which may be
-     * an absolute or relative path.
-     *
-     * @remarks
-     * If `path` refers to a filesystem object that is not a symbolic link, then an `ErrnoException` is thrown
-     * with code 'UNKNOWN'.  If `path` does not exist, then an `ErrnoException` is thrown with code `ENOENT`.
-     *
-     * @param path - The absolute or relative path to the symbolic link.
-     * @returns the path of the link target
-     */
-    static readLink(path: string): string;
-    /**
-     * An async version of {@link FileSystem.readLink}.
-     */
-    static readLinkAsync(path: string): Promise<string>;
-    /**
-     * Creates an NTFS "directory junction" on Windows operating systems; for other operating systems, it
-     * creates a regular symbolic link.  The link target must be a folder, not a file.
-     * Behind the scenes it uses `fs.symlinkSync()`.
-     *
-     * @remarks
-     * For security reasons, Windows operating systems by default require administrator elevation to create
-     * symbolic links.  As a result, on Windows it's generally recommended for Node.js tools to use hard links
-     * (for files) or NTFS directory junctions (for folders), since regular users are allowed to create them.
-     * Hard links and junctions are less vulnerable to symlink attacks because they cannot reference a network share,
-     * and their target must exist at the time of link creation.  Non-Windows operating systems generally don't
-     * restrict symlink creation, and as such are more vulnerable to symlink attacks.  Note that Windows can be
-     * configured to permit regular users to create symlinks, for example by enabling Windows 10 "developer mode."
-     *
-     * A directory junction requires the link source and target to both be located on local disk volumes;
-     * if not, use a symbolic link instead.
-     */
-    static createSymbolicLinkJunction(options: IFileSystemCreateLinkOptions): void;
-    /**
-     * An async version of {@link FileSystem.createSymbolicLinkJunction}.
-     */
-    static createSymbolicLinkJunctionAsync(options: IFileSystemCreateLinkOptions): Promise<void>;
-    /**
-     * Creates a symbolic link to a file.  On Windows operating systems, this may require administrator elevation.
-     * Behind the scenes it uses `fs.symlinkSync()`.
-     *
-     * @remarks
-     * To avoid administrator elevation on Windows, use {@link FileSystem.createHardLink} instead.
-     *
-     * On Windows operating systems, the NTFS file system distinguishes file symlinks versus directory symlinks:
-     * If the target is not the correct type, the symlink will be created successfully, but will fail to resolve.
-     * Other operating systems do not make this distinction, in which case {@link FileSystem.createSymbolicLinkFile}
-     * and {@link FileSystem.createSymbolicLinkFolder} can be used interchangeably, but doing so will make your
-     * tool incompatible with Windows.
-     */
-    static createSymbolicLinkFile(options: IFileSystemCreateLinkOptions): void;
-    /**
-     * An async version of {@link FileSystem.createSymbolicLinkFile}.
-     */
-    static createSymbolicLinkFileAsync(options: IFileSystemCreateLinkOptions): Promise<void>;
-    /**
-     * Creates a symbolic link to a folder.  On Windows operating systems, this may require administrator elevation.
-     * Behind the scenes it uses `fs.symlinkSync()`.
-     *
-     * @remarks
-     * To avoid administrator elevation on Windows, use {@link FileSystem.createSymbolicLinkJunction} instead.
-     *
-     * On Windows operating systems, the NTFS file system distinguishes file symlinks versus directory symlinks:
-     * If the target is not the correct type, the symlink will be created successfully, but will fail to resolve.
-     * Other operating systems do not make this distinction, in which case {@link FileSystem.createSymbolicLinkFile}
-     * and {@link FileSystem.createSymbolicLinkFolder} can be used interchangeably, but doing so will make your
-     * tool incompatible with Windows.
-     */
-    static createSymbolicLinkFolder(options: IFileSystemCreateLinkOptions): void;
-    /**
-     * An async version of {@link FileSystem.createSymbolicLinkFolder}.
-     */
-    static createSymbolicLinkFolderAsync(options: IFileSystemCreateLinkOptions): Promise<void>;
-    /**
-     * Creates a hard link.  The link target must be a file, not a folder.
-     * Behind the scenes it uses `fs.linkSync()`.
-     *
-     * @remarks
-     * For security reasons, Windows operating systems by default require administrator elevation to create
-     * symbolic links.  As a result, on Windows it's generally recommended for Node.js tools to use hard links
-     * (for files) or NTFS directory junctions (for folders), since regular users are allowed to create them.
-     * Hard links and junctions are less vulnerable to symlink attacks because they cannot reference a network share,
-     * and their target must exist at the time of link creation.  Non-Windows operating systems generally don't
-     * restrict symlink creation, and as such are more vulnerable to symlink attacks.  Note that Windows can be
-     * configured to permit regular users to create symlinks, for example by enabling Windows 10 "developer mode."
-     *
-     * A hard link requires the link source and target to both be located on same disk volume;
-     * if not, use a symbolic link instead.
-     */
-    static createHardLink(options: IFileSystemCreateLinkOptions): void;
-    /**
-     * An async version of {@link FileSystem.createHardLink}.
-     */
-    static createHardLinkAsync(options: IFileSystemCreateLinkOptions): Promise<void>;
-    /**
-     * Follows a link to its destination and returns the absolute path to the final target of the link.
-     * Behind the scenes it uses `fs.realpathSync()`.
-     * @param linkPath - The path to the link.
-     */
-    static getRealPath(linkPath: string): string;
-    /**
-     * An async version of {@link FileSystem.getRealPath}.
-     */
-    static getRealPathAsync(linkPath: string): Promise<string>;
-    /**
-     * Returns true if the error object indicates the file or folder already exists (`EEXIST`).
-     */
-    static isExistError(error: Error): boolean;
-    /**
-     * Returns true if the error object indicates the file or folder does not exist (`ENOENT` or `ENOTDIR`)
-     */
-    static isNotExistError(error: Error): boolean;
-    /**
-     * Returns true if the error object indicates the file does not exist (`ENOENT`).
-     */
-    static isFileDoesNotExistError(error: Error): boolean;
-    /**
-     * Returns true if the error object indicates the folder does not exist (`ENOTDIR`).
-     */
-    static isFolderDoesNotExistError(error: Error): boolean;
-    /**
-     * Returns true if the error object indicates the target is a directory (`EISDIR`).
-     */
-    static isDirectoryError(error: Error): boolean;
-    /**
-     * Returns true if the error object indicates the target is not a directory (`ENOTDIR`).
-     */
-    static isNotDirectoryError(error: Error): boolean;
-    /**
-     * Returns true if the error object indicates that the `unlink` system call failed
-     * due to a permissions issue (`EPERM`).
-     */
-    static isUnlinkNotPermittedError(error: Error): boolean;
-    /**
-     * Detects if the provided error object is a `NodeJS.ErrnoException`
-     */
-    static isErrnoException(error: Error): error is NodeJS.ErrnoException;
-    private static _handleLink;
-    private static _handleLinkAsync;
-    private static _wrapException;
-    private static _wrapExceptionAsync;
-    private static _updateErrorMessage;
-}
-
-/**
- * Callback function type for {@link IFileSystemCopyFilesAsyncOptions.filter}
- * @public
- */
-export declare type FileSystemCopyFilesAsyncFilter = (sourcePath: string, destinationPath: string) => Promise<boolean>;
-
-/**
- * Callback function type for {@link IFileSystemCopyFilesOptions.filter}
- * @public
- */
-export declare type FileSystemCopyFilesFilter = (sourcePath: string, destinationPath: string) => boolean;
-
-/**
- * An alias for the Node.js `fs.Stats` object.
- *
- * @remarks
- * This avoids the need to import the `fs` package when using the {@link FileSystem} API.
- * @public
- */
-export declare type FileSystemStats = fs.Stats;
-
-/**
- * API for interacting with file handles.
- * @public
- */
-export declare class FileWriter {
-    /**
-     * The `filePath` that was passed to {@link FileWriter.open}.
-     */
-    readonly filePath: string;
-    private _fileDescriptor;
-    private constructor();
-    /**
-     * Opens a new file handle to the file at the specified path and given mode.
-     * Behind the scenes it uses `fs.openSync()`.
-     * The behaviour of this function is platform specific.
-     * See: https://nodejs.org/docs/latest-v8.x/api/fs.html#fs_fs_open_path_flags_mode_callback
-     * @param filePath - The absolute or relative path to the file handle that should be opened.
-     * @param flags - The flags for opening the handle
-     */
-    static open(filePath: string, flags?: IFileWriterFlags): FileWriter;
-    /**
-     * Helper function to convert the file writer array to a Node.js style string (e.g. "wx" or "a").
-     * @param flags - The flags that should be converted.
-     */
-    private static _convertFlagsForNode;
-    /**
-     * Writes some text to the given file handle. Throws if the file handle has been closed.
-     * Behind the scenes it uses `fs.writeSync()`.
-     * @param text - The text to write to the file.
-     */
-    write(text: string): void;
-    /**
-     * Closes the file handle permanently. No operations can be made on this file handle after calling this.
-     * Behind the scenes it uses `fs.closeSync()` and releases the file descriptor to be re-used.
-     *
-     * @remarks
-     * The `close()` method can be called more than once; additional calls are ignored.
-     */
-    close(): void;
-}
-
-/**
- * String constants for common folder names.
- *
- * @public
- */
-export declare enum FolderConstants {
-    /**
-     * ".git" - the data storage for a Git working folder
-     */
-    Git = ".git",
-    /**
-     * "node_modules" - the folder where package managers install their files
-     */
-    NodeModules = "node_modules"
-}
-
-/**
- * An alias for the Node.js `fs.Dirent` object.
- *
- * @remarks
- * This avoids the need to import the `fs` package when using the {@link FileSystem} API.
- * @public
- */
-export declare type FolderItem = fs.Dirent;
-
-/**
- * Options for {@link AnsiEscape.formatForTests}.
- * @public
- */
-export declare interface IAnsiEscapeConvertForTestsOptions {
-    /**
-     * If true then `\n` will be replaced by `[n]`, and `\r` will be replaced by `[r]`.
-     */
-    encodeNewlines?: boolean;
-}
-
-/**
- * Options for controlling the parallelism of asynchronous operations.
- *
- * @remarks
- * Used with {@link Async.mapAsync} and {@link Async.forEachAsync}.
- *
- * @beta
- */
-export declare interface IAsyncParallelismOptions {
-    /**
-     * Optionally used with the  {@link Async.mapAsync} and {@link Async.forEachAsync}
-     * to limit the maximum number of concurrent promises to the specified number.
-     */
-    concurrency?: number;
-}
-
-/**
- * @beta
- */
-export declare interface IColorableSequence {
-    text: string;
-    isEol?: boolean;
-    foregroundColor?: ColorValue;
-    backgroundColor?: ColorValue;
-    textAttributes?: TextAttribute[];
-}
-
-/**
- * Options to be provided to a {@link ConsoleTerminalProvider}
- *
- * @beta
- */
-export declare interface IConsoleTerminalProviderOptions {
-    /**
-     * If true, print verbose logging messages.
-     */
-    verboseEnabled: boolean;
-    /**
-     * If true, print debug logging messages. Note that "verbose" and "debug" are considered
-     * separate message filters; if you want debug to imply verbose, it is up to your
-     * application code to enforce that.
-     */
-    debugEnabled: boolean;
-}
-
-/**
- * A process environment variable name and its value.  Used by {@link EnvironmentMap}.
- * @public
- */
-export declare interface IEnvironmentEntry {
-    /**
-     * The name of the environment variable.
-     */
-    name: string;
-    /**
-     * The value of the environment variable.
-     */
-    value: string;
-}
-
-/**
- * Options for Executable.tryResolve().
- * @public
- */
-export declare interface IExecutableResolveOptions {
-    /**
-     * The current working directory.  If omitted, process.cwd() will be used.
-     */
-    currentWorkingDirectory?: string;
-    /**
-     * The environment variables for the child process.
-     *
-     * @remarks
-     * If `environment` and `environmentMap` are both omitted, then `process.env` will be used.
-     * If `environment` and `environmentMap` cannot both be specified.
-     */
-    environment?: NodeJS.ProcessEnv;
-    /**
-     * The environment variables for the child process.
-     *
-     * @remarks
-     * If `environment` and `environmentMap` are both omitted, then `process.env` will be used.
-     * If `environment` and `environmentMap` cannot both be specified.
-     */
-    environmentMap?: EnvironmentMap;
-}
-
-/**
- * Options for {@link Executable.spawn}
- * @public
- */
-export declare interface IExecutableSpawnOptions extends IExecutableResolveOptions {
-    /**
-     * The stdio mappings for the child process.
-     *
-     * NOTE: If IExecutableSpawnSyncOptions.input is provided, it will take precedence
-     * over the stdin mapping (stdio[0]).
-     */
-    stdio?: ExecutableStdioMapping;
-}
-
-/**
- * Options for {@link Executable.spawnSync}
- * @public
- */
-export declare interface IExecutableSpawnSyncOptions extends IExecutableResolveOptions {
-    /**
-     * The content to be passed to the child process's stdin.
-     *
-     * NOTE: If specified, this content replaces any IExecutableSpawnSyncOptions.stdio[0]
-     * mapping for stdin.
-     */
-    input?: string;
-    /**
-     * The stdio mappings for the child process.
-     *
-     * NOTE: If IExecutableSpawnSyncOptions.input is provided, it will take precedence
-     * over the stdin mapping (stdio[0]).
-     */
-    stdio?: ExecutableStdioMapping;
-    /**
-     * The maximum time the process is allowed to run before it will be terminated.
-     */
-    timeoutMs?: number;
-    /**
-     * The largest amount of bytes allowed on stdout or stderr for this synchronous operation.
-     * If exceeded, the child process will be terminated.  The default is 200 * 1024.
-     */
-    maxBuffer?: number;
-}
-
-/**
- * Provides options for the output message of a file error.
- *
- * @public
- */
-export declare interface IFileErrorFormattingOptions {
-    /**
-     * The format for the error message. If no format is provided, format 'Unix' is used by default.
-     */
-    format?: FileLocationStyle;
-}
-
-/**
- * Provides options for the creation of a FileError.
- *
- * @public
- */
-export declare interface IFileErrorOptions {
-    /**
-     * The absolute path to the file that contains the error.
-     */
-    absolutePath: string;
-    /**
-     * The root folder for the project that the error is in relation to.
-     */
-    projectFolder: string;
-    /**
-     * The line number of the error in the target file. Minimum value is 1.
-     */
-    line?: number;
-    /**
-     * The column number of the error in the target file. Minimum value is 1.
-     */
-    column?: number;
-}
-
-/**
- * @public
- */
-export declare interface IFileSystemCopyFileBaseOptions {
-    /**
-     * The path of the existing object to be copied.
-     * The path may be absolute or relative.
-     */
-    sourcePath: string;
-    /**
-     * Specifies what to do if the destination path already exists.
-     * @defaultValue {@link AlreadyExistsBehavior.Overwrite}
-     */
-    alreadyExistsBehavior?: AlreadyExistsBehavior;
-}
-
-/**
- * The options for {@link FileSystem.copyFile}
- * @public
- */
-export declare interface IFileSystemCopyFileOptions extends IFileSystemCopyFileBaseOptions {
-    /**
-     * The path that the object will be copied to.
-     * The path may be absolute or relative.
-     */
-    destinationPath: string;
-}
-
-/**
- * The options for {@link FileSystem.copyFilesAsync}
- * @public
- */
-export declare interface IFileSystemCopyFilesAsyncOptions {
-    /**
-     * The starting path of the file or folder to be copied.
-     * The path may be absolute or relative.
-     */
-    sourcePath: string;
-    /**
-     * The path that the files will be copied to.
-     * The path may be absolute or relative.
-     */
-    destinationPath: string;
-    /**
-     * If true, then when copying symlinks, copy the target object instead of copying the link.
-     */
-    dereferenceSymlinks?: boolean;
-    /**
-     * Specifies what to do if a destination path already exists.
-     *
-     * @remarks
-     * This setting is applied individually for each file being copied.
-     * For example, `AlreadyExistsBehavior.Overwrite` will not recursively delete a folder
-     * whose path corresponds to an individual file that is being copied to that location.
-     */
-    alreadyExistsBehavior?: AlreadyExistsBehavior;
-    /**
-     * If true, then the target object will be assigned "last modification" and "last access" timestamps
-     * that are the same as the source.  Otherwise, the OS default timestamps are assigned.
-     */
-    preserveTimestamps?: boolean;
-    /**
-     * A callback that will be invoked for each path that is copied.  The callback can return `false`
-     * to cause the object to be excluded from the operation.
-     */
-    filter?: FileSystemCopyFilesAsyncFilter | FileSystemCopyFilesFilter;
-}
-
-/**
- * The options for {@link FileSystem.copyFiles}
- * @public
- */
-export declare interface IFileSystemCopyFilesOptions extends IFileSystemCopyFilesAsyncOptions {
-    /**  {@inheritdoc IFileSystemCopyFilesAsyncOptions.filter} */
-    filter?: FileSystemCopyFilesFilter;
-}
-
-/**
- * The options for {@link FileSystem.createSymbolicLinkJunction}, {@link FileSystem.createSymbolicLinkFile},
- * {@link FileSystem.createSymbolicLinkFolder}, and {@link FileSystem.createHardLink}.
- *
- * @public
- */
-export declare interface IFileSystemCreateLinkOptions {
-    /**
-     * The newly created symbolic link will point to `linkTargetPath` as its target.
-     */
-    linkTargetPath: string;
-    /**
-     * The newly created symbolic link will have this path.
-     */
-    newLinkPath: string;
-    /**
-     * Specifies what to do if the path to create already exists.
-     * The default is `AlreadyExistsBehavior.Error`.
-     */
-    alreadyExistsBehavior?: AlreadyExistsBehavior;
-}
-
-/**
- * The options for {@link FileSystem.deleteFile}
- * @public
- */
-export declare interface IFileSystemDeleteFileOptions {
-    /**
-     * If true, will throw an exception if the file did not exist before `deleteFile()` was called.
-     * @defaultValue false
-     */
-    throwIfNotExists?: boolean;
-}
-
-/**
- * The options for {@link FileSystem.move}
- * @public
- */
-export declare interface IFileSystemMoveOptions {
-    /**
-     * The path of the existing object to be moved.
-     * The path may be absolute or relative.
-     */
-    sourcePath: string;
-    /**
-     * The new path for the object.
-     * The path may be absolute or relative.
-     */
-    destinationPath: string;
-    /**
-     * If true, will overwrite the file if it already exists.
-     * @defaultValue true
-     */
-    overwrite?: boolean;
-    /**
-     * If true, will ensure the folder is created before writing the file.
-     * @defaultValue false
-     */
-    ensureFolderExists?: boolean;
-}
-
-/**
- * The options for {@link FileSystem.readFile}
- * @public
- */
-export declare interface IFileSystemReadFileOptions {
-    /**
-     * If specified, will change the encoding of the file that will be written.
-     * @defaultValue Encoding.Utf8
-     */
-    encoding?: Encoding;
-    /**
-     * If specified, will normalize line endings to the specified style of newline.
-     * @defaultValue `undefined` which means no conversion will be performed
-     */
-    convertLineEndings?: NewlineKind;
-}
-
-/**
- * The options for {@link FileSystem.readFolder}
- * @public
- */
-export declare interface IFileSystemReadFolderOptions {
-    /**
-     * If true, returns the absolute paths of the files in the folder.
-     * @defaultValue false
-     */
-    absolutePaths?: boolean;
-}
-
-/**
- * The options for {@link FileSystem.updateTimes}
- * Both times must be specified.
- * @public
- */
-export declare interface IFileSystemUpdateTimeParameters {
-    /**
-     * The POSIX epoch time or Date when this was last accessed.
-     */
-    accessedTime: number | Date;
-    /**
-     * The POSIX epoch time or Date when this was last modified
-     */
-    modifiedTime: number | Date;
-}
-
-/**
- * The options for {@link FileSystem.writeFile}
- * @public
- */
-export declare interface IFileSystemWriteFileOptions {
-    /**
-     * If true, will ensure the folder is created before writing the file.
-     * @defaultValue false
-     */
-    ensureFolderExists?: boolean;
-    /**
-     * If specified, will normalize line endings to the specified style of newline.
-     * @defaultValue `undefined` which means no conversion will be performed
-     */
-    convertLineEndings?: NewlineKind;
-    /**
-     * If specified, will change the encoding of the file that will be written.
-     * @defaultValue "utf8"
-     */
-    encoding?: Encoding;
-}
-
-/**
- * Interface which represents the flags about which mode the file should be opened in.
- * @public
- */
-export declare interface IFileWriterFlags {
-    /**
-     * Open file for appending.
-     */
-    append?: boolean;
-    /**
-     * Fails if path exists. The exclusive flag ensures that path is newly created.
-     *
-     * @remarks
-     * On POSIX-like operating systems, path is considered to exist even if it is a symlink to a
-     * non-existent file.  The exclusive flag may or may not work with network file systems.
-     *
-     * POSIX is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc.
-     */
-    exclusive?: boolean;
-}
-
-/**
- * Options for {@link Import.resolveModule}
- * @public
- */
-export declare interface IImportResolveModuleOptions extends IImportResolveOptions {
-    /**
-     * The module identifier to resolve. For example "\@rushstack/node-core-library" or
-     * "\@rushstack/node-core-library/lib/index.js"
-     */
-    modulePath: string;
-}
-
-/**
- * Common options shared by {@link IImportResolveModuleOptions} and {@link IImportResolvePackageOptions}
- * @public
- */
-export declare interface IImportResolveOptions {
-    /**
-     * The path from which {@link IImportResolveModuleOptions.modulePath} or
-     * {@link IImportResolvePackageOptions.packageName} should be resolved.
-     */
-    baseFolderPath: string;
-    /**
-     * If true, if the package name matches a Node.js system module, then the return
-     * value will be the package name without any path.
-     *
-     * @remarks
-     * This will take precedence over an installed NPM package of the same name.
-     *
-     * Example:
-     * ```ts
-     * // Returns the string "fs" indicating the Node.js system module
-     * Import.resolveModulePath({
-     *   resolvePath: "fs",
-     *   basePath: process.cwd()
-     * })
-     * ```
-     */
-    includeSystemModules?: boolean;
-    /**
-     * If true, then resolvePath is allowed to refer to the package.json of the active project.
-     *
-     * @remarks
-     * This will take precedence over any installed dependency with the same name.
-     * Note that this requires an additional PackageJsonLookup calculation.
-     *
-     * Example:
-     * ```ts
-     * // Returns an absolute path to the current package
-     * Import.resolveModulePath({
-     *   resolvePath: "current-project",
-     *   basePath: process.cwd(),
-     *   allowSelfReference: true
-     * })
-     * ```
-     */
-    allowSelfReference?: boolean;
-}
-
-/**
- * Options for {@link Import.resolvePackage}
- * @public
- */
-export declare interface IImportResolvePackageOptions extends IImportResolveOptions {
-    /**
-     * The package name to resolve. For example "\@rushstack/node-core-library"
-     */
-    packageName: string;
-}
-
-/**
- * Options for {@link JsonFile.loadAndValidate} and {@link JsonFile.loadAndValidateAsync}
- *
- * @public
- */
-export declare interface IJsonFileLoadAndValidateOptions extends IJsonFileParseOptions, IJsonSchemaValidateOptions {
-}
-
-/**
- * Options for {@link JsonFile.parseString}, {@link JsonFile.load}, and {@link JsonFile.loadAsync}.
- *
- * @public
- */
-export declare interface IJsonFileParseOptions {
-    /**
-     * Specifies the variant of JSON syntax to be used.
-     *
-     * @defaultValue
-     * `JsonSyntax.Json5`
-     *
-     * NOTE: This default will be changed to `JsonSyntax.JsonWithComments` in a future release.
-     */
-    jsonSyntax?: JsonSyntax;
-}
-
-/**
- * Options for {@link JsonFile.save} and {@link JsonFile.saveAsync}.
- *
- * @public
- */
-export declare interface IJsonFileSaveOptions extends IJsonFileStringifyOptions {
-    /**
-     * If there is an existing file, and the contents have not changed, then
-     * don't write anything; this preserves the old timestamp.
-     */
-    onlyIfChanged?: boolean;
-    /**
-     * Creates the folder recursively using FileSystem.ensureFolder()
-     * Defaults to false.
-     */
-    ensureFolderExists?: boolean;
-    /**
-     * If true, use the "jju" library to preserve the existing JSON formatting:  The file will be loaded
-     * from the target filename, the new content will be merged in (preserving whitespace and comments),
-     * and then the file will be overwritten with the merged contents.  If the target file does not exist,
-     * then the file is saved normally.
-     */
-    updateExistingFile?: boolean;
-}
-
-/**
- * Options for {@link JsonFile.stringify}
- *
- * @public
- */
-export declare interface IJsonFileStringifyOptions {
-    /**
-     * If provided, the specified newline type will be used instead of the default `\r\n`.
-     */
-    newlineConversion?: NewlineKind;
-    /**
-     * By default, `JsonFile.stringify()` validates that the object does not contain any
-     * keys whose value is `undefined`.  To disable this validation, set `ignoreUndefinedValues=true`
-     * which causes such keys to be silently discarded, consistent with the system `JSON.stringify()`.
-     *
-     * @remarks
-     *
-     * The JSON file format can represent `null` values ({@link JsonNull}) but not `undefined` values.
-     * In ECMAScript code however, we generally avoid `null` and always represent empty states
-     * as `undefined`, because it is the default value of missing/uninitialized variables.
-     * (In practice, distinguishing "null" versus "uninitialized" has more drawbacks than benefits.)
-     * This poses a problem when serializing ECMAScript objects that contain `undefined` members.
-     * As a safeguard, `JsonFile` will report an error if any `undefined` values are encountered
-     * during serialization.  Set `ignoreUndefinedValues=true` to disable this safeguard.
-     */
-    ignoreUndefinedValues?: boolean;
-    /**
-     * If true, then the "jju" library will be used to improve the text formatting.
-     * Note that this is slightly slower than the native JSON.stringify() implementation.
-     */
-    prettyFormatting?: boolean;
-    /**
-     * If specified, this header will be prepended to the start of the file.  The header must consist
-     * of lines prefixed by "//" characters.
-     * @remarks
-     * When used with {@link IJsonFileSaveOptions.updateExistingFile}
-     * or {@link JsonFile.updateString}, the header will ONLY be added for a newly created file.
-     */
-    headerComment?: string;
-}
-
-/**
- * Callback function arguments for JsonSchema.validateObjectWithCallback();
- * @public
- */
-export declare interface IJsonSchemaErrorInfo {
-    /**
-     * The z-schema error tree, formatted as an indented text string.
-     */
-    details: string;
-}
-
-/**
- * Options for JsonSchema.fromFile()
- * @public
- */
-export declare interface IJsonSchemaFromFileOptions {
-    /**
-     * Other schemas that this schema references, e.g. via the "$ref" directive.
-     * @remarks
-     * The tree of dependent schemas may reference the same schema more than once.
-     * However, if the same schema "id" is used by two different JsonSchema instances,
-     * an error will be reported.  This means you cannot load the same filename twice
-     * and use them both together, and you cannot have diamond dependencies on different
-     * versions of the same schema.  Although technically this would be possible to support,
-     * it normally indicates an error or design problem.
-     *
-     * JsonSchema also does not allow circular references between schema dependencies.
-     */
-    dependentSchemas?: JsonSchema[];
-}
-
-/**
- * Options for JsonSchema.validateObject()
- * @public
- */
-export declare interface IJsonSchemaValidateOptions {
-    /**
-     * A custom header that will be used to report schema errors.
-     * @remarks
-     * If omitted, the default header is "JSON validation failed:".  The error message starts with
-     * the header, followed by the full input filename, followed by the z-schema error tree.
-     * If you wish to customize all aspects of the error message, use JsonFile.loadAndValidateWithCallback()
-     * or JsonSchema.validateObjectWithCallback().
-     */
-    customErrorHeader?: string;
-}
-
-/**
- * Helpers for resolving and importing Node.js modules.
- * @public
- */
-export declare class Import {
-    private static __builtInModules;
-    private static get _builtInModules();
-    /**
-     * Provides a way to improve process startup times by lazy-loading imported modules.
-     *
-     * @remarks
-     * This is a more structured wrapper for the {@link https://www.npmjs.com/package/import-lazy|import-lazy}
-     * package.  It enables you to replace an import like this:
-     *
-     * ```ts
-     * import * as example from 'example'; // <-- 100ms load time
-     *
-     * if (condition) {
-     *   example.doSomething();
-     * }
-     * ```
-     *
-     * ...with a pattern like this:
-     *
-     * ```ts
-     * const example: typeof import('example') = Import.lazy('example', require);
-     *
-     * if (condition) {
-     *   example.doSomething(); // <-- 100ms load time occurs here, only if needed
-     * }
-     * ```
-     *
-     * The implementation relies on JavaScript's `Proxy` feature to intercept access to object members.  Thus
-     * it will only work correctly with certain types of module exports.  If a particular export isn't well behaved,
-     * you may need to find (or introduce) some other module in your dependency graph to apply the optimization to.
-     *
-     * Usage guidelines:
-     *
-     * - Always specify types using `typeof` as shown above.
-     *
-     * - Never apply lazy-loading in a way that would convert the module's type to `any`. Losing type safety
-     *   seriously impacts the maintainability of the code base.
-     *
-     * - In cases where the non-runtime types are needed, import them separately using the `Types` suffix:
-     *
-     * ```ts
-     * const example: typeof import('example') = Import.lazy('example', require);
-     * import type * as exampleTypes from 'example';
-     * ```
-     *
-     * - If the imported module confusingly has the same name as its export, then use the Module suffix:
-     *
-     * ```ts
-     * const exampleModule: typeof import('../../logic/Example') = Import.lazy(
-     *   '../../logic/Example', require);
-     * import type * as exampleTypes from '../../logic/Example';
-     * ```
-     *
-     * - If the exports cause a lot of awkwardness (e.g. too many expressions need to have `exampleModule.` inserted
-     *   into them), or if some exports cannot be proxied (e.g. `Import.lazy('example', require)` returns a function
-     *   signature), then do not lazy-load that module.  Instead, apply lazy-loading to some other module which is
-     *   better behaved.
-     *
-     * - It's recommended to sort imports in a standard ordering:
-     *
-     * ```ts
-     * // 1. external imports
-     * import * as path from 'path';
-     * import { Import, JsonFile, JsonObject } from '@rushstack/node-core-library';
-     *
-     * // 2. local imports
-     * import { LocalFile } from './path/LocalFile';
-     *
-     * // 3. lazy-imports (which are technically variables, not imports)
-     * const semver: typeof import('semver') = Import.lazy('semver', require);
-     * ```
-     */
-    static lazy(moduleName: string, require: (id: string) => unknown): any;
-    /**
-     * This resolves a module path using similar logic as the Node.js `require.resolve()` API,
-     * but supporting extra features such as specifying the base folder.
-     *
-     * @remarks
-     * A module path is a text string that might appear in a statement such as
-     * `import { X } from "____";` or `const x = require("___");`.  The implementation is based
-     * on the popular `resolve` NPM package.
-     *
-     * Suppose `example` is an NPM package whose entry point is `lib/index.js`:
-     * ```ts
-     * // Returns "/path/to/project/node_modules/example/lib/index.js"
-     * Import.resolveModule({ modulePath: 'example' });
-     *
-     * // Returns "/path/to/project/node_modules/example/lib/other.js"
-     * Import.resolveModule({ modulePath: 'example/lib/other' });
-     * ```
-     * If you need to determine the containing package folder
-     * (`/path/to/project/node_modules/example`), use {@link Import.resolvePackage} instead.
-     *
-     * @returns the absolute path of the resolved module.
-     * If {@link IImportResolveOptions.includeSystemModules} is specified
-     * and a system module is found, then its name is returned without any file path.
-     */
-    static resolveModule(options: IImportResolveModuleOptions): string;
-    /**
-     * Performs module resolution to determine the folder where a package is installed.
-     *
-     * @remarks
-     * Suppose `example` is an NPM package whose entry point is `lib/index.js`:
-     * ```ts
-     * // Returns "/path/to/project/node_modules/example"
-     * Import.resolvePackage({ packageName: 'example' });
-     * ```
-     *
-     * If you need to resolve a module path, use {@link Import.resolveModule} instead:
-     * ```ts
-     * // Returns "/path/to/project/node_modules/example/lib/index.js"
-     * Import.resolveModule({ modulePath: 'example' });
-     * ```
-     *
-     * @returns the absolute path of the package folder.
-     * If {@link IImportResolveOptions.includeSystemModules} is specified
-     * and a system module is found, then its name is returned without any file path.
-     */
-    static resolvePackage(options: IImportResolvePackageOptions): string;
-    private static _getPackageName;
-}
-
-/**
- * An interface for accessing common fields from a package.json file whose version field may be missing.
- *
- * @remarks
- * This interface is the same as {@link IPackageJson}, except that the `version` field is optional.
- * According to the {@link https://docs.npmjs.com/files/package.json | NPM documentation}
- * and {@link http://wiki.commonjs.org/wiki/Packages/1.0 | CommonJS Packages specification}, the `version` field
- * is normally a required field for package.json files.
- *
- * However, NodeJS relaxes this requirement for its `require()` API.  The
- * {@link https://nodejs.org/dist/latest-v10.x/docs/api/modules.html#modules_folders_as_modules
- * | "Folders as Modules" section} from the NodeJS documentation gives an example of a package.json file
- * that has only the `name` and `main` fields.  NodeJS does not consider the `version` field during resolution,
- * so it can be omitted.  Some libraries do this.
- *
- * Use the `INodePackageJson` interface when loading such files.  Use `IPackageJson` for package.json files
- * that are installed from an NPM registry, or are otherwise known to have a `version` field.
- *
- * @public
- */
-export declare interface INodePackageJson {
-    /**
-     * The name of the package.
-     */
-    name: string;
-    /**
-     * A version number conforming to the Semantic Versioning (SemVer) standard.
-     */
-    version?: string;
-    /**
-     * Indicates whether this package is allowed to be published or not.
-     */
-    private?: boolean;
-    /**
-     * A brief description of the package.
-     */
-    description?: string;
-    /**
-     * The URL of the project's repository.
-     */
-    repository?: string | IPackageJsonRepository;
-    /**
-     * The URL to the project's web page.
-     */
-    homepage?: string;
-    /**
-     * The name of the license.
-     */
-    license?: string;
-    /**
-     * The path to the module file that will act as the main entry point.
-     */
-    main?: string;
-    /**
-     * The path to the TypeScript *.d.ts file describing the module file
-     * that will act as the main entry point.
-     */
-    types?: string;
-    /**
-     * Alias for `types`
-     */
-    typings?: string;
-    /**
-     * The path to the TSDoc metadata file.
-     * This is still being standardized: https://github.com/microsoft/tsdoc/issues/7#issuecomment-442271815
-     * @beta
-     */
-    tsdocMetadata?: string;
-    /**
-     * The main entry point for the package.
-     */
-    bin?: string;
-    /**
-     * An array of dependencies that must always be installed for this package.
-     */
-    dependencies?: IPackageJsonDependencyTable;
-    /**
-     * An array of optional dependencies that may be installed for this package.
-     */
-    optionalDependencies?: IPackageJsonDependencyTable;
-    /**
-     * An array of dependencies that must only be installed for developers who will
-     * build this package.
-     */
-    devDependencies?: IPackageJsonDependencyTable;
-    /**
-     * An array of dependencies that must be installed by a consumer of this package,
-     * but which will not be automatically installed by this package.
-     */
-    peerDependencies?: IPackageJsonDependencyTable;
-    /**
-     * A table of script hooks that a package manager or build tool may invoke.
-     */
-    scripts?: IPackageJsonScriptTable;
-    /**
-     * A table of package version resolutions. This feature is only implemented by the Yarn package manager.
-     *
-     * @remarks
-     * See the {@link https://github.com/yarnpkg/rfcs/blob/master/implemented/0000-selective-versions-resolutions.md
-     * | 0000-selective-versions-resolutions.md RFC} for details.
-     */
-    resolutions?: Record<string, string>;
-}
-
-/**
- * An `Error` subclass that should be thrown to report an unexpected state that may indicate a software defect.
- * An application may handle this error by instructing the end user to report an issue to the application maintainers.
- *
- * @remarks
- * Do not use this class unless you intend to solicit bug reports from end users.
- *
- * @public
- */
-export declare class InternalError extends Error {
-    /**
-     * If true, a JavScript `debugger;` statement will be invoked whenever the `InternalError` constructor is called.
-     *
-     * @remarks
-     * Generally applications should not be catching and ignoring an `InternalError`.  Instead, the error should
-     * be reported and typically the application will terminate.  Thus, if `InternalError` is constructed, it's
-     * almost always something we want to examine in a debugger.
-     */
-    static breakInDebugger: boolean;
-    /**
-     * The underlying error message, without the additional boilerplate for an `InternalError`.
-     */
-    readonly unformattedMessage: string;
-    /**
-     * Constructs a new instance of the {@link InternalError} class.
-     *
-     * @param message - A message describing the error.  This will be assigned to
-     * {@link InternalError.unformattedMessage}.  The `Error.message` field will have additional boilerplate
-     * explaining that the user has encountered a software defect.
-     */
-    constructor(message: string);
-    private static _formatMessage;
-    /** @override */
-    toString(): string;
-}
-
-/**
- * An interface for accessing common fields from a package.json file.
- *
- * @remarks
- * This interface describes a package.json file format whose `name` and `version` field are required.
- * In some situations, the `version` field is optional; in that case, use the {@link INodePackageJson}
- * interface instead.
- *
- * More fields may be added to this interface in the future.  For documentation about the package.json file format,
- * see the {@link http://wiki.commonjs.org/wiki/Packages/1.0 | CommonJS Packages specification}
- * and the {@link https://docs.npmjs.com/files/package.json | NPM manual page}.
- *
- * @public
- */
-export declare interface IPackageJson extends INodePackageJson {
-    /** {@inheritDoc INodePackageJson.version} */
-    version: string;
-}
-
-/**
- * This interface is part of the IPackageJson file format.  It is used for the
- * "dependencies", "optionalDependencies", and "devDependencies" fields.
- * @public
- */
-export declare interface IPackageJsonDependencyTable {
-    /**
-     * The key is the name of a dependency.  The value is a Semantic Versioning (SemVer)
-     * range specifier.
-     */
-    [dependencyName: string]: string;
-}
-
-/**
- * Constructor parameters for {@link PackageJsonLookup}
- *
- * @public
- */
-export declare interface IPackageJsonLookupParameters {
-    /**
-     * Certain package.json fields such as "contributors" can be very large, and may
-     * significantly increase the memory footprint for the PackageJsonLookup cache.
-     * By default, PackageJsonLookup only loads a subset of standard commonly used
-     * fields names.  Set loadExtraFields=true to always return all fields.
-     */
-    loadExtraFields?: boolean;
-}
-
-/**
- * This interface is part of the IPackageJson file format.  It is used for the
- * "repository" field.
- * @public
- */
-export declare interface IPackageJsonRepository {
-    /**
-     * The source control type for the repository that hosts the project. This is typically "git".
-     */
-    type: string;
-    /**
-     * The URL of the repository that hosts the project.
-     */
-    url: string;
-    /**
-     * If the project does not exist at the root of the repository, its path is specified here.
-     */
-    directory?: string;
-}
-
-/**
- * This interface is part of the IPackageJson file format.  It is used for the
- * "scripts" field.
- * @public
- */
-export declare interface IPackageJsonScriptTable {
-    /**
-     * The key is the name of the script hook.  The value is the script body which may
-     * be a file path or shell script command.
-     */
-    [scriptName: string]: string;
-}
-
-/**
- * Options that configure the validation rules used by a {@link PackageNameParser} instance.
- *
- * @remarks
- * The default validation is based on the npmjs.com registry's policy for published packages, and includes these
- * restrictions:
- *
- * - The package name cannot be longer than 214 characters.
- *
- * - The package name must not be empty.
- *
- * - Other than the `@` and `/` delimiters used for scopes, the only allowed characters
- *   are letters, numbers, `-`, `_`, and `.`.
- *
- * - The name must not start with a `.` or `_`.
- *
- * @public
- */
-export declare interface IPackageNameParserOptions {
-    /**
-     * If true, allows upper-case letters in package names.
-     * This improves compatibility with some legacy private registries that still allow that.
-     */
-    allowUpperCase?: boolean;
-}
-
-/**
- * A package name that has been separated into its scope and unscoped name.
- *
- * @public
- */
-export declare interface IParsedPackageName {
-    /**
-     * The parsed NPM scope, or an empty string if there was no scope.  The scope value will
-     * always include the at-sign.
-     * @remarks
-     * For example, if the parsed input was "\@scope/example", then scope would be "\@scope".
-     */
-    scope: string;
-    /**
-     * The parsed NPM package name without the scope.
-     * @remarks
-     * For example, if the parsed input was "\@scope/example", then the name would be "example".
-     */
-    unscopedName: string;
-}
-
-/**
- * Result object returned by {@link PackageName.tryParse}
- *
- * @public
- */
-export declare interface IParsedPackageNameOrError extends IParsedPackageName {
-    /**
-     * If the input string could not be parsed, then this string will contain a nonempty
-     * error message.  Otherwise it will be an empty string.
-     */
-    error: string;
-}
-
-/**
- * Options for {@link Path.formatConcisely}.
- * @public
- */
-export declare interface IPathFormatConciselyOptions {
-    /**
-     * The path to be converted.
-     */
-    pathToConvert: string;
-    /**
-     * The base path to use when converting `pathToConvert` to a relative path.
-     */
-    baseFolder: string;
-    /**
-     * If set to true, don't include the leading `./` if the path is under the base folder.
-     */
-    trimLeadingDotSlash?: boolean;
-}
-
-/**
- * Options for {@link Path.formatFileLocation}.
- * @public
- */
-export declare interface IPathFormatFileLocationOptions {
-    /**
-     * The base path to use when converting `pathToFormat` to a relative path. If not specified,
-     * `pathToFormat` will be used as-is.
-     */
-    baseFolder?: string;
-    /**
-     * The path that will be used to specify the file location.
-     */
-    pathToFormat: string;
-    /**
-     * The message related to the file location.
-     */
-    message: string;
-    /**
-     * The style of file location formatting to use.
-     */
-    format: FileLocationStyle;
-    /**
-     * The optional line number. If not specified, the line number will not be included
-     * in the formatted string.
-     */
-    line?: number;
-    /**
-     * The optional column number. If not specified, the column number will not be included
-     * in the formatted string.
-     */
-    column?: number;
-}
-
-/**
- * Constructor parameters for {@link ProtectableMap}
- *
- * @public
- */
-export declare interface IProtectableMapParameters<K, V> {
-    /**
-     * An optional hook that will be invoked before Map.clear() is performed.
-     */
-    onClear?: (source: ProtectableMap<K, V>) => void;
-    /**
-     * An optional hook that will be invoked before Map.delete() is performed.
-     */
-    onDelete?: (source: ProtectableMap<K, V>, key: K) => void;
-    /**
-     * An optional hook that will be invoked before Map.set() is performed.
-     * @remarks
-     * If this hook is provided, the function MUST return the `value` parameter.
-     * This provides the opportunity to modify the value before it is added
-     * to the map.
-     */
-    onSet?: (source: ProtectableMap<K, V>, key: K, value: V) => V;
-}
-
-/**
- * @remarks
- * Used with {@link Async.runWithRetriesAsync}.
- *
- * @beta
- */
-export declare interface IRunWithRetriesOptions<TResult> {
-    action: () => Promise<TResult> | TResult;
-    maxRetries: number;
-    retryDelayMs?: number;
-}
-
-/**
- * @beta
- */
-export declare interface IStringBufferOutputOptions {
-    /**
-     * If set to true, special characters like \\n, \\r, and the \\u001b character
-     * in color control tokens will get normalized to [-n-], [-r-], and [-x-] respectively
-     *
-     * This option defaults to `true`
-     */
-    normalizeSpecialCharacters: boolean;
-}
-
-/**
- * An interface for a builder object that allows a large text string to be constructed incrementally by appending
- * small chunks.
- *
- * @remarks
- *
- * {@link StringBuilder} is the default implementation of this contract.
- *
- * @public
- */
-export declare interface IStringBuilder {
-    /**
-     * Append the specified text to the buffer.
-     */
-    append(text: string): void;
-    /**
-     * Returns a single string containing all the text that was appended to the buffer so far.
-     *
-     * @remarks
-     *
-     * This is a potentially expensive operation.
-     */
-    toString(): string;
-}
-
-/**
- * Details about how the `child_process.ChildProcess` was created.
- *
- * @beta
- */
-export declare interface ISubprocessOptions {
-    /**
-     * Whether or not the child process was started in detached mode.
-     *
-     * @remarks
-     * On POSIX systems, detached=true is required for killing the subtree. Attempting to kill the
-     * subtree on POSIX systems with detached=false will throw an error. On Windows, detached=true
-     * creates a separate console window and is not required for killing the subtree. In general,
-     * it is recommended to use SubprocessTerminator.RECOMMENDED_OPTIONS when forking or spawning
-     * a child process.
-     */
-    detached: boolean;
-}
-
-/**
- * @beta
- */
-export declare interface ITerminal {
-    /**
-     * Subscribe a new terminal provider.
-     */
-    registerProvider(provider: ITerminalProvider): void;
-    /**
-     * Unsubscribe a terminal provider. If the provider isn't subscribed, this function does nothing.
-     */
-    unregisterProvider(provider: ITerminalProvider): void;
-    /**
-     * Write a generic message to the terminal
-     */
-    write(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a generic message to the terminal, followed by a newline
-     */
-    writeLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a warning message to the console with yellow text.
-     *
-     * @remarks
-     * The yellow color takes precedence over any other foreground colors set.
-     */
-    writeWarning(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a warning message to the console with yellow text, followed by a newline.
-     *
-     * @remarks
-     * The yellow color takes precedence over any other foreground colors set.
-     */
-    writeWarningLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write an error message to the console with red text.
-     *
-     * @remarks
-     * The red color takes precedence over any other foreground colors set.
-     */
-    writeError(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write an error message to the console with red text, followed by a newline.
-     *
-     * @remarks
-     * The red color takes precedence over any other foreground colors set.
-     */
-    writeErrorLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a verbose-level message.
-     */
-    writeVerbose(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a verbose-level message followed by a newline.
-     */
-    writeVerboseLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a debug-level message.
-     */
-    writeDebug(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * Write a debug-level message followed by a newline.
-     */
-    writeDebugLine(...messageParts: (string | IColorableSequence)[]): void;
-}
-
-/**
- * Implement the interface to create a terminal provider. Terminal providers
- * can be registered to a {@link Terminal} instance to receive messages.
- *
- * @beta
- */
-export declare interface ITerminalProvider {
-    /**
-     * This property should return true only if the terminal provider supports
-     * rendering console colors.
-     */
-    supportsColor: boolean;
-    /**
-     * This property should return the newline character the terminal provider
-     * expects.
-     */
-    eolCharacter: string;
-    /**
-     * This function gets called on every terminal provider upon every
-     * message function call on the terminal instance.
-     *
-     * @param data - The terminal message.
-     * @param severity - The message severity. Terminal providers can
-     * route different kinds of messages to different streams and may choose
-     * to ignore verbose or debug messages.
-     */
-    write(data: string, severity: TerminalProviderSeverity): void;
-}
-
-/**
- * Utilities for reading/writing JSON files.
- * @public
- */
-export declare class JsonFile {
-    /**
-     * @internal
-     */
-    static _formatPathForError: (path: string) => string;
-    /**
-     * Loads a JSON file.
-     */
-    static load(jsonFilename: string, options?: IJsonFileParseOptions): JsonObject;
-    /**
-     * An async version of {@link JsonFile.load}.
-     */
-    static loadAsync(jsonFilename: string, options?: IJsonFileParseOptions): Promise<JsonObject>;
-    /**
-     * Parses a JSON file's contents.
-     */
-    static parseString(jsonContents: string, options?: IJsonFileParseOptions): JsonObject;
-    /**
-     * Loads a JSON file and validate its schema.
-     */
-    static loadAndValidate(jsonFilename: string, jsonSchema: JsonSchema, options?: IJsonFileLoadAndValidateOptions): JsonObject;
-    /**
-     * An async version of {@link JsonFile.loadAndValidate}.
-     */
-    static loadAndValidateAsync(jsonFilename: string, jsonSchema: JsonSchema, options?: IJsonFileLoadAndValidateOptions): Promise<JsonObject>;
-    /**
-     * Loads a JSON file and validate its schema, reporting errors using a callback
-     * @remarks
-     * See JsonSchema.validateObjectWithCallback() for more info.
-     */
-    static loadAndValidateWithCallback(jsonFilename: string, jsonSchema: JsonSchema, errorCallback: (errorInfo: IJsonSchemaErrorInfo) => void, options?: IJsonFileLoadAndValidateOptions): JsonObject;
-    /**
-     * An async version of {@link JsonFile.loadAndValidateWithCallback}.
-     */
-    static loadAndValidateWithCallbackAsync(jsonFilename: string, jsonSchema: JsonSchema, errorCallback: (errorInfo: IJsonSchemaErrorInfo) => void, options?: IJsonFileLoadAndValidateOptions): Promise<JsonObject>;
-    /**
-     * Serializes the specified JSON object to a string buffer.
-     * @param jsonObject - the object to be serialized
-     * @param options - other settings that control serialization
-     * @returns a JSON string, with newlines, and indented with two spaces
-     */
-    static stringify(jsonObject: JsonObject, options?: IJsonFileStringifyOptions): string;
-    /**
-     * Serializes the specified JSON object to a string buffer.
-     * @param jsonObject - the object to be serialized
-     * @param options - other settings that control serialization
-     * @returns a JSON string, with newlines, and indented with two spaces
-     */
-    static updateString(previousJson: string, newJsonObject: JsonObject, options?: IJsonFileStringifyOptions): string;
-    /**
-     * Saves the file to disk.  Returns false if nothing was written due to options.onlyIfChanged.
-     * @param jsonObject - the object to be saved
-     * @param jsonFilename - the file path to write
-     * @param options - other settings that control how the file is saved
-     * @returns false if ISaveJsonFileOptions.onlyIfChanged didn't save anything; true otherwise
-     */
-    static save(jsonObject: JsonObject, jsonFilename: string, options?: IJsonFileSaveOptions): boolean;
-    /**
-     * An async version of {@link JsonFile.save}.
-     */
-    static saveAsync(jsonObject: JsonObject, jsonFilename: string, options?: IJsonFileSaveOptions): Promise<boolean>;
-    /**
-     * Used to validate a data structure before writing.  Reports an error if there
-     * are any undefined members.
-     */
-    static validateNoUndefinedMembers(jsonObject: JsonObject): void;
-    private static _validateNoUndefinedMembers;
-    private static _formatKeyPath;
-    private static _formatJsonHeaderComment;
-    private static _buildJjuParseOptions;
-}
-
-/**
- * The Rush Stack lint rules discourage usage of `null`.  However, JSON parsers always return JavaScript's
- * `null` to keep the two syntaxes consistent.  When creating interfaces that describe JSON structures,
- * use `JsonNull` to avoid triggering the lint rule.  Do not use `JsonNull` for any other purpose.
- *
- * @remarks
- * If you are designing a new JSON file format, it's a good idea to avoid `null` entirely.  In most cases
- * there are better representations that convey more information about an item that is unknown, omitted, or disabled.
- *
- * To understand why `null` is deprecated, please see the `@rushstack/eslint-plugin` documentation here:
- *
- * {@link https://www.npmjs.com/package/@rushstack/eslint-plugin#rushstackno-null}
- *
- * @public
- */
-export declare type JsonNull = null;
-
-/**
- * Represents a JSON-serializable object whose type has not been determined yet.
- *
- * @remarks
- *
- * This type is similar to `any`, except that it communicates that the object is serializable JSON.
- *
- * @public
- */
-export declare type JsonObject = any;
-
-/**
- * Represents a JSON schema that can be used to validate JSON data files loaded by the JsonFile class.
- * @remarks
- * The schema itself is normally loaded and compiled later, only if it is actually required to validate
- * an input.  To avoid schema errors at runtime, it's recommended to create a unit test that calls
- * JsonSchema.ensureCompiled() for each of your schema objects.
- *
- * @public
- */
-export declare class JsonSchema {
-    private _dependentSchemas;
-    private _filename;
-    private _validator;
-    private _schemaObject;
-    private constructor();
-    /**
-     * Registers a JsonSchema that will be loaded from a file on disk.
-     * @remarks
-     * NOTE: An error occurs if the file does not exist; however, the file itself is not loaded or validated
-     * until it the schema is actually used.
-     */
-    static fromFile(filename: string, options?: IJsonSchemaFromFileOptions): JsonSchema;
-    /**
-     * Registers a JsonSchema that will be loaded from a file on disk.
-     * @remarks
-     * NOTE: An error occurs if the file does not exist; however, the file itself is not loaded or validated
-     * until it the schema is actually used.
-     */
-    static fromLoadedObject(schemaObject: JsonObject): JsonSchema;
-    private static _collectDependentSchemas;
-    /**
-     * Used to nicely format the ZSchema error tree.
-     */
-    private static _formatErrorDetails;
-    /**
-     * Used by _formatErrorDetails.
-     */
-    private static _formatErrorDetailsHelper;
-    /**
-     * Returns a short name for this schema, for use in error messages.
-     * @remarks
-     * If the schema was loaded from a file, then the base filename is used.  Otherwise, the "id"
-     * field is used if available.
-     */
-    get shortName(): string;
-    /**
-     * If not already done, this loads the schema from disk and compiles it.
-     * @remarks
-     * Any dependencies will be compiled as well.
-     */
-    ensureCompiled(): void;
-    /**
-     * Validates the specified JSON object against this JSON schema.  If the validation fails,
-     * an exception will be thrown.
-     * @param jsonObject - The JSON data to be validated
-     * @param filenameForErrors - The filename that the JSON data was available, or an empty string
-     *    if not applicable
-     * @param options - Other options that control the validation
-     */
-    validateObject(jsonObject: JsonObject, filenameForErrors: string, options?: IJsonSchemaValidateOptions): void;
-    /**
-     * Validates the specified JSON object against this JSON schema.  If the validation fails,
-     * a callback is called for each validation error.
-     */
-    validateObjectWithCallback(jsonObject: JsonObject, errorCallback: (errorInfo: IJsonSchemaErrorInfo) => void): void;
-    private _ensureLoaded;
-}
-
-/**
- * Specifies the variant of JSON syntax to be used.
- *
- * @public
- */
-export declare enum JsonSyntax {
-    /**
-     * Specifies the exact RFC 8259 format as implemented by the `JSON.parse()` system API.
-     * This format was designed for machine generated inputs such as an HTTP payload.
-     * It is not a recommend choice for human-authored files, because it does not support
-     * code comments.
-     *
-     * @remarks
-     *
-     * A well-known quote from Douglas Crockford, the inventor of JSON:
-     *
-     * "I removed comments from JSON because I saw people were using them to hold parsing directives,
-     * a practice which would have destroyed interoperability.  I know that the lack of comments makes
-     * some people sad, but it shouldn't.  Suppose you are using JSON to keep configuration files,
-     * which you would like to annotate.  Go ahead and insert all the comments you like.
-     * Then pipe it through JSMin before handing it to your JSON parser."
-     *
-     * @see {@link https://datatracker.ietf.org/doc/html/rfc8259 | RFC 8259}
-     */
-    Strict = "strict",
-    /**
-     * `JsonSyntax.JsonWithComments` is the recommended format for human-authored config files.
-     * It is a minimal extension to `JsonSyntax.Strict` adding support for code comments
-     * using `//` and `/*`.
-     *
-     * @remarks
-     *
-     * VS Code calls this format `jsonc`, but it should not be confused with unrelated file formats
-     * and libraries that also use the name "JSONC".
-     *
-     * To fix VS Code syntax highlighting, add this setting:
-     * `"files.associations": { "*.json": "jsonc" }`
-     *
-     * To fix GitHub syntax highlighting, add this to your `.gitattributes`:
-     * `*.json linguist-language=JSON-with-Comments`
-     */
-    JsonWithComments = "jsonWithComments",
-    /**
-     * JSON5 is a project that proposes a JSON-like format supplemented with ECMAScript 5.1
-     * notations for objects, numbers, comments, and more.
-     *
-     * @remarks
-     * Files using this format should use the `.json5` file extension instead of `.json`.
-     *
-     * JSON5 has substantial differences from JSON: object keys may be unquoted, trailing commas
-     * are allowed, and strings may span multiple lines.  Whereas `JsonSyntax.JsonWithComments` can
-     * be cheaply converted to standard JSON by stripping comments, parsing JSON5 requires a
-     * nontrivial algorithm that may not be easily available in some contexts or programming languages.
-     *
-     * @see {@link https://json5.org/ | JSON5 project website}
-     */
-    Json5 = "json5"
-}
-
-/**
- * Helper functions used when interacting with APIs that do not follow modern coding practices.
- * @public
- */
-export declare class LegacyAdapters {
-    /**
-     * This function wraps a function with a callback in a promise.
-     */
-    static convertCallbackToPromise<TResult, TError>(fn: (cb: LegacyCallback<TResult, TError>) => void): Promise<TResult>;
-    static convertCallbackToPromise<TResult, TError, TArg1>(fn: (arg1: TArg1, cb: LegacyCallback<TResult, TError>) => void, arg1: TArg1): Promise<TResult>;
-    static convertCallbackToPromise<TResult, TError, TArg1, TArg2>(fn: (arg1: TArg1, arg2: TArg2, cb: LegacyCallback<TResult, TError>) => void, arg1: TArg1, arg2: TArg2): Promise<TResult>;
-    static convertCallbackToPromise<TResult, TError, TArg1, TArg2, TArg3>(fn: (arg1: TArg1, arg2: TArg2, arg3: TArg3, cb: LegacyCallback<TResult, TError>) => void, arg1: TArg1, arg2: TArg2, arg3: TArg3): Promise<TResult>;
-    static convertCallbackToPromise<TResult, TError, TArg1, TArg2, TArg3, TArg4>(fn: (arg1: TArg1, arg2: TArg2, arg3: TArg3, arg4: TArg4, cb: LegacyCallback<TResult, TError>) => void, arg1: TArg1, arg2: TArg2, arg3: TArg3, arg4: TArg4): Promise<TResult>;
-    /**
-     * Normalizes an object into an `Error` object.
-     */
-    static scrubError(error: Error | string | any): Error;
-    /**
-     * Prior to Node 11.x, the `Array.sort()` algorithm is not guaranteed to be stable.
-     * If you need a stable sort, you can use `sortStable()` as a workaround.
-     *
-     * @deprecated
-     * Use native Array.sort(), since Node &lt; 14 is no longer supported
-     * @remarks
-     * On NodeJS 11.x and later, this method simply calls the native `Array.sort()`.
-     */
-    static sortStable<T>(array: T[], compare?: (a: T, b: T) => number): void;
-}
-
-/**
- * Callback used by {@link LegacyAdapters}.
- * @public
- */
-export declare type LegacyCallback<TResult, TError> = (error: TError | null | undefined, result: TResult) => void;
-
-/**
- * The `LockFile` implements a file-based mutex for synchronizing access to a shared resource
- * between multiple Node.js processes.  It is not recommended for synchronization solely within
- * a single Node.js process.
- * @remarks
- * The implementation works on Windows, Mac, and Linux without requiring any native helpers.
- * On non-Windows systems, the algorithm requires access to the `ps` shell command.  On Linux,
- * it requires access the `/proc/${pidString}/stat` filesystem.
- * @public
- */
-export declare class LockFile {
-    private static _getStartTime;
-    private _fileWriter;
-    private _filePath;
-    private _dirtyWhenAcquired;
-    private constructor();
-    /**
-     * Returns the path of the lockfile that will be created when a lock is successfully acquired.
-     * @param resourceFolder - The folder where the lock file will be created
-     * @param resourceName - An alphanumeric name that describes the resource being locked.  This will become
-     *   the filename of the temporary file created to manage the lock.
-     * @param pid - The PID for the current Node.js process (`process.pid`), which is used by the locking algorithm.
-     */
-    static getLockFilePath(resourceFolder: string, resourceName: string, pid?: number): string;
-    /**
-     * Attempts to create a lockfile with the given filePath.
-     * @param resourceFolder - The folder where the lock file will be created
-     * @param resourceName - An alphanumeric name that describes the resource being locked.  This will become
-     *   the filename of the temporary file created to manage the lock.
-     * @returns If successful, returns a `LockFile` instance.  If unable to get a lock, returns `undefined`.
-     */
-    static tryAcquire(resourceFolder: string, resourceName: string): LockFile | undefined;
-    /**
-     * Attempts to create the lockfile.  Will continue to loop at every 100ms until the lock becomes available
-     * or the maxWaitMs is surpassed.
-     *
-     * @remarks
-     * This function is subject to starvation, whereby it does not ensure that the process that has been
-     * waiting the longest to acquire the lock will get it first. This means that a process could theoretically
-     * wait for the lock forever, while other processes skipped it in line and acquired the lock first.
-     *
-     * @param resourceFolder - The folder where the lock file will be created
-     * @param resourceName - An alphanumeric name that describes the resource being locked.  This will become
-     *   the filename of the temporary file created to manage the lock.
-     * @param maxWaitMs - The maximum number of milliseconds to wait for the lock before reporting an error
-     */
-    static acquire(resourceFolder: string, resourceName: string, maxWaitMs?: number): Promise<LockFile>;
-    /**
-     * Attempts to acquire the lock on a Linux or OSX machine
-     */
-    private static _tryAcquireMacOrLinux;
-    /**
-     * Attempts to acquire the lock using Windows
-     * This algorithm is much simpler since we can rely on the operating system
-     */
-    private static _tryAcquireWindows;
-    /**
-     * Unlocks a file and optionally removes it from disk.
-     * This can only be called once.
-     *
-     * @param deleteFile - Whether to delete the lockfile from disk. Defaults to true.
-     */
-    release(deleteFile?: boolean): void;
-    /**
-     * Returns the initial state of the lock.
-     * This can be used to detect if the previous process was terminated before releasing the resource.
-     */
-    get dirtyWhenAcquired(): boolean;
-    /**
-     * Returns the absolute path to the lockfile
-     */
-    get filePath(): string;
-    /**
-     * Returns true if this lock is currently being held.
-     */
-    get isReleased(): boolean;
-}
-
-/**
- * Helper functions for working with the `Map<K, V>` data type.
- *
- * @public
- */
-export declare class MapExtensions {
-    /**
-     * Adds all the (key, value) pairs from the source map into the target map.
-     * @remarks
-     * This function modifies targetMap.  Any existing keys will be overwritten.
-     * @param targetMap - The map that entries will be added to
-     * @param sourceMap - The map containing the entries to be added
-     */
-    static mergeFromMap<K, V>(targetMap: Map<K, V>, sourceMap: ReadonlyMap<K, V>): void;
-    /**
-     * Converts a string-keyed map to an object.
-     * @remarks
-     * This function has the same effect as Object.fromEntries(map.entries())
-     * in supported versions of Node (\>= 12.0.0).
-     * @param map - The map that the object properties will be sourced from
-     */
-    static toObject<TValue>(map: Map<string, TValue>): {
-        [key: string]: TValue;
-    };
-}
-
-/**
- * Enumeration controlling conversion of newline characters.
- * @public
- */
-export declare enum NewlineKind {
-    /**
-     * Windows-style newlines
-     */
-    CrLf = "\r\n",
-    /**
-     * POSIX-style newlines
-     *
-     * @remarks
-     * POSIX is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc.
-     */
-    Lf = "\n",
-    /**
-     * Default newline type for this operating system (`os.EOL`).
-     */
-    OsDefault = "os"
-}
-
-/**
- * This class provides methods for finding the nearest "package.json" for a folder
- * and retrieving the name of the package.  The results are cached.
- *
- * @public
- */
-export declare class PackageJsonLookup {
-    private static _instance;
-    /**
-     * A singleton instance of `PackageJsonLookup`, which is useful for short-lived processes
-     * that can reasonably assume that the file system will not be modified after the cache
-     * is populated.
-     *
-     * @remarks
-     * For long-running processes that need to clear the cache at appropriate times,
-     * it is recommended to create your own instance of `PackageJsonLookup` instead
-     * of relying on this instance.
-     */
-    static get instance(): PackageJsonLookup;
-    private _loadExtraFields;
-    private _packageFolderCache;
-    private _packageJsonCache;
-    constructor(parameters?: IPackageJsonLookupParameters);
-    /**
-     * A helper for loading the caller's own package.json file.
-     *
-     * @remarks
-     *
-     * This function provides a concise and efficient way for an NPM package to report metadata about itself.
-     * For example, a tool might want to report its version.
-     *
-     * The `loadOwnPackageJson()` probes upwards from the caller's folder, expecting to find a package.json file,
-     * which is assumed to be the caller's package.  The result is cached, under the assumption that a tool's
-     * own package.json (and intermediary folders) will never change during the lifetime of the process.
-     *
-     * @example
-     * ```ts
-     * // Report the version of our NPM package
-     * const myPackageVersion: string = PackageJsonLookup.loadOwnPackageJson(__dirname).version;
-     * console.log(`Cool Tool - Version ${myPackageVersion}`);
-     * ```
-     *
-     * @param dirnameOfCaller - The NodeJS `__dirname` macro for the caller.
-     * @returns This function always returns a valid `IPackageJson` object.  If any problems are encountered during
-     * loading, an exception will be thrown instead.
-     */
-    static loadOwnPackageJson(dirnameOfCaller: string): IPackageJson;
-    /**
-     * Clears the internal file cache.
-     * @remarks
-     * Call this method if changes have been made to the package.json files on disk.
-     */
-    clearCache(): void;
-    /**
-     * Returns the absolute path of a folder containing a package.json file, by looking
-     * upwards from the specified fileOrFolderPath.  If no package.json can be found,
-     * undefined is returned.
-     *
-     * @remarks
-     * The fileOrFolderPath is not required to actually exist on disk.
-     * The fileOrFolderPath itself can be the return value, if it is a folder containing
-     * a package.json file.
-     * Both positive and negative lookup results are cached.
-     *
-     * @param fileOrFolderPath - a relative or absolute path to a source file or folder
-     * that may be part of a package
-     * @returns an absolute path to a folder containing a package.json file
-     */
-    tryGetPackageFolderFor(fileOrFolderPath: string): string | undefined;
-    /**
-     * If the specified file or folder is part of a package, this returns the absolute path
-     * to the associated package.json file.
-     *
-     * @remarks
-     * The package folder is determined using the same algorithm
-     * as {@link PackageJsonLookup.tryGetPackageFolderFor}.
-     *
-     * @param fileOrFolderPath - a relative or absolute path to a source file or folder
-     * that may be part of a package
-     * @returns an absolute path to * package.json file
-     */
-    tryGetPackageJsonFilePathFor(fileOrFolderPath: string): string | undefined;
-    /**
-     * If the specified file or folder is part of a package, this loads and returns the
-     * associated package.json file.
-     *
-     * @remarks
-     * The package folder is determined using the same algorithm
-     * as {@link PackageJsonLookup.tryGetPackageFolderFor}.
-     *
-     * @param fileOrFolderPath - a relative or absolute path to a source file or folder
-     * that may be part of a package
-     * @returns an IPackageJson object, or undefined if the fileOrFolderPath does not
-     * belong to a package
-     */
-    tryLoadPackageJsonFor(fileOrFolderPath: string): IPackageJson | undefined;
-    /**
-     * This function is similar to {@link PackageJsonLookup.tryLoadPackageJsonFor}, except that it does not report
-     * an error if the `version` field is missing from the package.json file.
-     */
-    tryLoadNodePackageJsonFor(fileOrFolderPath: string): INodePackageJson | undefined;
-    /**
-     * Loads the specified package.json file, if it is not already present in the cache.
-     *
-     * @remarks
-     * Unless {@link IPackageJsonLookupParameters.loadExtraFields} was specified,
-     * the returned IPackageJson object will contain a subset of essential fields.
-     * The returned object should be considered to be immutable; the caller must never
-     * modify it.
-     *
-     * @param jsonFilename - a relative or absolute path to a package.json file
-     */
-    loadPackageJson(jsonFilename: string): IPackageJson;
-    /**
-     * This function is similar to {@link PackageJsonLookup.loadPackageJson}, except that it does not report an error
-     * if the `version` field is missing from the package.json file.
-     */
-    loadNodePackageJson(jsonFilename: string): INodePackageJson;
-    private _loadPackageJsonInner;
-    /**
-     * Try to load a package.json file as an INodePackageJson,
-     * returning undefined if the found file does not contain a `name` field.
-     */
-    private _tryLoadNodePackageJsonInner;
-    private _tryGetPackageFolderFor;
-}
-
-/**
- * Provides basic operations for validating and manipulating NPM package names such as `my-package`
- * or `@scope/my-package`.
- *
- * @remarks
- * This is the default implementation of {@link PackageNameParser}, exposed as a convenient static class.
- * If you need to configure the parsing rules, use `PackageNameParser` instead.
- *
- * @public
- */
-export declare class PackageName {
-    private static readonly _parser;
-    /** {@inheritDoc PackageNameParser.tryParse} */
-    static tryParse(packageName: string): IParsedPackageNameOrError;
-    /** {@inheritDoc PackageNameParser.parse} */
-    static parse(packageName: string): IParsedPackageName;
-    /** {@inheritDoc PackageNameParser.getScope} */
-    static getScope(packageName: string): string;
-    /** {@inheritDoc PackageNameParser.getUnscopedName} */
-    static getUnscopedName(packageName: string): string;
-    /** {@inheritDoc PackageNameParser.isValidName} */
-    static isValidName(packageName: string): boolean;
-    /** {@inheritDoc PackageNameParser.validate} */
-    static validate(packageName: string): void;
-    /** {@inheritDoc PackageNameParser.combineParts} */
-    static combineParts(scope: string, unscopedName: string): string;
-}
-
-/**
- * A configurable parser for validating and manipulating NPM package names such as `my-package` or `@scope/my-package`.
- *
- * @remarks
- * If you do not need to customize the parser configuration, it is recommended to use {@link PackageName}
- * which exposes these operations as a simple static class.
- *
- * @public
- */
-export declare class PackageNameParser {
-    private static readonly _invalidNameCharactersRegExp;
-    private readonly _options;
-    constructor(options?: IPackageNameParserOptions);
-    /**
-     * This attempts to parse a package name that may include a scope component.
-     * The packageName must not be an empty string.
-     * @remarks
-     * This function will not throw an exception.
-     *
-     * @returns an {@link IParsedPackageNameOrError} structure whose `error` property will be
-     * nonempty if the string could not be parsed.
-     */
-    tryParse(packageName: string): IParsedPackageNameOrError;
-    /**
-     * Same as {@link PackageName.tryParse}, except this throws an exception if the input
-     * cannot be parsed.
-     * @remarks
-     * The packageName must not be an empty string.
-     */
-    parse(packageName: string): IParsedPackageName;
-    /**
-     * {@inheritDoc IParsedPackageName.scope}
-     */
-    getScope(packageName: string): string;
-    /**
-     * {@inheritDoc IParsedPackageName.unscopedName}
-     */
-    getUnscopedName(packageName: string): string;
-    /**
-     * Returns true if the specified package name is valid, or false otherwise.
-     * @remarks
-     * This function will not throw an exception.
-     */
-    isValidName(packageName: string): boolean;
-    /**
-     * Throws an exception if the specified name is not a valid package name.
-     * The packageName must not be an empty string.
-     */
-    validate(packageName: string): void;
-    /**
-     * Combines an optional package scope with an unscoped root name.
-     * @param scope - Must be either an empty string, or a scope name such as "\@example"
-     * @param unscopedName - Must be a nonempty package name that does not contain a scope
-     * @returns A full package name such as "\@example/some-library".
-     */
-    combineParts(scope: string, unscopedName: string): string;
-}
-
-/**
- * Common operations for manipulating file and directory paths.
- * @remarks
- * This API is intended to eventually be a complete replacement for the NodeJS "path" API.
- * @public
- */
-export declare class Path {
-    private static _relativePathRegex;
-    private static _upwardPathSegmentRegex;
-    /**
-     * Returns true if "childPath" is located inside the "parentFolderPath" folder
-     * or one of its child folders.  Note that "parentFolderPath" is not considered to be
-     * under itself.  The "childPath" can refer to any type of file system object.
-     *
-     * @remarks
-     * The indicated file/folder objects are not required to actually exist on disk.
-     * For example, "parentFolderPath" is interpreted as a folder name even if it refers to a file.
-     * If the paths are relative, they will first be resolved using path.resolve().
-     */
-    static isUnder(childPath: string, parentFolderPath: string): boolean;
-    /**
-     * Returns true if "childPath" is equal to "parentFolderPath", or if it is inside that folder
-     * or one of its children.  The "childPath" can refer to any type of file system object.
-     *
-     * @remarks
-     * The indicated file/folder objects are not required to actually exist on disk.
-     * For example, "parentFolderPath" is interpreted as a folder name even if it refers to a file.
-     * If the paths are relative, they will first be resolved using path.resolve().
-     */
-    static isUnderOrEqual(childPath: string, parentFolderPath: string): boolean;
-    /**
-     * Returns true if `path1` and `path2` refer to the same underlying path.
-     *
-     * @remarks
-     *
-     * The comparison is performed using `path.relative()`.
-     */
-    static isEqual(path1: string, path2: string): boolean;
-    /**
-     * Formats a path to look nice for reporting purposes.
-     * @remarks
-     * If `pathToConvert` is under the `baseFolder`, then it will be converted to a relative with the `./` prefix
-     * unless the {@link IPathFormatConciselyOptions.trimLeadingDotSlash} option is set to `true`.
-     * Otherwise, it will be converted to an absolute path.
-     *
-     * Backslashes will be converted to slashes, unless the path starts with an OS-specific string like `C:\`.
-     */
-    static formatConcisely(options: IPathFormatConciselyOptions): string;
-    /**
-     * Formats a file location to look nice for reporting purposes.
-     * @remarks
-     * If `pathToFormat` is under the `baseFolder`, then it will be converted to a relative with the `./` prefix.
-     * Otherwise, it will be converted to an absolute path.
-     *
-     * Backslashes will be converted to slashes, unless the path starts with an OS-specific string like `C:\`.
-     */
-    static formatFileLocation(options: IPathFormatFileLocationOptions): string;
-    /**
-     * Replaces Windows-style backslashes with POSIX-style slashes.
-     *
-     * @remarks
-     * POSIX is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc.
-     */
-    static convertToSlashes(inputPath: string): string;
-    /**
-     * Replaces POSIX-style slashes with Windows-style backslashes
-     *
-     * @remarks
-     * POSIX is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc.
-     */
-    static convertToBackslashes(inputPath: string): string;
-    /**
-     * Replaces slashes or backslashes with the appropriate slash for the current operating system.
-     */
-    static convertToPlatformDefault(inputPath: string): string;
-    /**
-     * Returns true if the specified path is a relative path and does not use `..` to walk upwards.
-     *
-     * @example
-     * ```ts
-     * // These evaluate to true
-     * isDownwardRelative('folder');
-     * isDownwardRelative('file');
-     * isDownwardRelative('folder/');
-     * isDownwardRelative('./folder/');
-     * isDownwardRelative('./folder/file');
-     *
-     * // These evaluate to false
-     * isDownwardRelative('../folder');
-     * isDownwardRelative('folder/../file');
-     * isDownwardRelative('/folder/file');
-     * ```
-     */
-    static isDownwardRelative(inputPath: string): boolean;
-}
-
-/**
- * An integer value used to specify file permissions for POSIX-like operating systems.
- *
- * @remarks
- *
- * This bitfield corresponds to the "mode_t" structure described in this document:
- * http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_stat.h.html
- *
- * It is used with NodeJS APIs such as fs.Stat.mode and fs.chmodSync().  These values
- * represent a set of permissions and can be combined using bitwise arithmetic.
- *
- * POSIX is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc.
- *
- * @public
- */
-export declare enum PosixModeBits {
-    /**
-     * Indicates that the item's owner can read the item.
-     */
-    UserRead = 256,
-    /**
-     * Indicates that the item's owner can modify the item.
-     */
-    UserWrite = 128,
-    /**
-     * Indicates that the item's owner can execute the item (if it is a file)
-     * or search the item (if it is a directory).
-     */
-    UserExecute = 64,
-    /**
-     * Indicates that users belonging to the item's group can read the item.
-     */
-    GroupRead = 32,
-    /**
-     * Indicates that users belonging to the item's group can modify the item.
-     */
-    GroupWrite = 16,
-    /**
-     * Indicates that users belonging to the item's group can execute the item (if it is a file)
-     * or search the item (if it is a directory).
-     */
-    GroupExecute = 8,
-    /**
-     * Indicates that other users (besides the item's owner user or group) can read the item.
-     */
-    OthersRead = 4,
-    /**
-     * Indicates that other users (besides the item's owner user or group) can modify the item.
-     */
-    OthersWrite = 2,
-    /**
-     * Indicates that other users (besides the item's owner user or group) can execute the item (if it is a file)
-     * or search the item (if it is a directory).
-     */
-    OthersExecute = 1,
-    /**
-     * A zero value where no permissions bits are set.
-     */
-    None = 0,
-    /**
-     * An alias combining OthersRead, GroupRead, and UserRead permission bits.
-     */
-    AllRead = 292,
-    /**
-     * An alias combining OthersWrite, GroupWrite, and UserWrite permission bits.
-     */
-    AllWrite = 146,
-    /**
-     * An alias combining OthersExecute, GroupExecute, and UserExecute permission bits.
-     */
-    AllExecute = 73
-}
-
-/**
- * The ProtectableMap provides an easy way for an API to expose a `Map<K, V>` property
- * while intercepting and validating any write operations that are performed by
- * consumers of the API.
- *
- * @remarks
- * The ProtectableMap itself is intended to be a private object that only its owner
- * can access directly.  Any operations performed directly on the ProtectableMap will
- * bypass the hooks and any validation they perform.  The public property that is exposed
- * to API consumers should return {@link ProtectableMap.protectedView} instead.
- *
- * For example, suppose you want to share your `Map<string, number>` data structure,
- * but you want to enforce that the key must always be an upper case string:
- * You could use the onSet() hook to validate the keys and throw an exception
- * if the key is not uppercase.
- *
- * @public
- */
-export declare class ProtectableMap<K, V> {
-    private readonly _protectedView;
-    constructor(parameters: IProtectableMapParameters<K, V>);
-    /**
-     * The owner of the protectable map should return this object via its public API.
-     */
-    get protectedView(): Map<K, V>;
-    /**
-     * Removes all entries from the map.
-     * This operation does NOT invoke the ProtectableMap onClear() hook.
-     */
-    clear(): void;
-    /**
-     * Removes the specified key from the map.
-     * This operation does NOT invoke the ProtectableMap onDelete() hook.
-     */
-    delete(key: K): boolean;
-    /**
-     * Sets a value for the specified key.
-     * This operation does NOT invoke the ProtectableMap onSet() hook.
-     */
-    set(key: K, value: V): this;
-    /**
-     * Performs an operation for each (key, value) entries in the map.
-     */
-    forEach(callbackfn: (value: V, key: K, map: Map<K, V>) => void, thisArg?: any): void;
-    /**
-     * Retrieves the value for the specified key.
-     * @returns undefined if the value is undefined OR if the key is missing;
-     * otherwise returns the value associated with the key.
-     */
-    get(key: K): V | undefined;
-    /**
-     * Returns true if the specified key belongs to the map.
-     */
-    has(key: K): boolean;
-    /**
-     * Returns the number of (key, value) entries in the map.
-     */
-    get size(): number;
-}
-
-/**
- * Operations for sorting collections.
- *
- * @public
- */
-export declare class Sort {
-    /**
-     * Compares `x` and `y` using the JavaScript `>` and `<` operators.  This function is suitable for usage as
-     * the callback for `array.sort()`.
-     *
-     * @remarks
-     *
-     * The JavaScript ordering is generalized so that `undefined` \< `null` \< all other values.
-     *
-     * @returns -1 if `x` is smaller than `y`, 1 if `x` is greater than `y`, or 0 if the values are equal.
-     *
-     * @example
-     *
-     * ```ts
-     * let array: number[] = [3, 6, 2];
-     * array.sort(Sort.compareByValue);  // [2, 3, 6]
-     * ```
-     */
-    static compareByValue(x: any, y: any): number;
-    /**
-     * Sorts the array according to a key which is obtained from the array elements.
-     * The result is guaranteed to be a stable sort.
-     *
-     * @example
-     *
-     * ```ts
-     * let array: string[] = [ 'aaa', 'bb', 'c' ];
-     * Sort.sortBy(array, x => x.length);  // [ 'c', 'bb', 'aaa' ]
-     * ```
-     */
-    static sortBy<T>(array: T[], keySelector: (element: T) => any, comparer?: (x: any, y: any) => number): void;
-    /**
-     * Returns true if the collection is already sorted.
-     */
-    static isSorted<T>(collection: Iterable<T>, comparer?: (x: any, y: any) => number): boolean;
-    /**
-     * Returns true if the collection is already sorted by the specified key.
-     *
-     * @example
-     *
-     * ```ts
-     * let array: string[] = [ 'a', 'bb', 'ccc' ];
-     * Sort.isSortedBy(array, x => x.length); // true
-     * ```
-     */
-    static isSortedBy<T>(collection: Iterable<T>, keySelector: (element: T) => any, comparer?: (x: any, y: any) => number): boolean;
-    /**
-     * Sorts the entries in a Map object according to the map keys.
-     * The result is guaranteed to be a stable sort.
-     *
-     * @example
-     *
-     * ```ts
-     * let map: Map<string, number> = new Map<string, number>();
-     * map.set('zebra', 1);
-     * map.set('goose', 2);
-     * map.set('aardvark', 3);
-     * Sort.sortMapKeys(map);
-     * console.log(JSON.stringify(Array.from(map.keys()))); // ["aardvark","goose","zebra"]
-     * ```
-     */
-    static sortMapKeys<K, V>(map: Map<K, V>, keyComparer?: (x: K, y: K) => number): void;
-    /**
-     * Sorts the entries in a Set object according to the specified keys.
-     * The result is guaranteed to be a stable sort.
-     *
-     * @example
-     *
-     * ```ts
-     * let set: Set<string> = new Set<string>();
-     * set.add('aaa');
-     * set.add('bb');
-     * set.add('c');
-     * Sort.sortSetBy(set, x => x.length);
-     * console.log(Array.from(set)); // ['c', 'bb', 'aaa']
-     * ```
-     */
-    static sortSetBy<T>(set: Set<T>, keySelector: (element: T) => any, keyComparer?: (x: T, y: T) => number): void;
-    /**
-     * Sorts the entries in a Set object.  The result is guaranteed to be a stable sort.
-     *
-     * @example
-     *
-     * ```ts
-     * let set: Set<string> = new Set<string>();
-     * set.add('zebra');
-     * set.add('goose');
-     * set.add('aardvark');
-     * Sort.sortSet(set);
-     * console.log(Array.from(set)); // ['aardvark', 'goose', 'zebra']
-     * ```
-     */
-    static sortSet<T>(set: Set<T>, comparer?: (x: T, y: T) => number): void;
-}
-
-/**
- * Terminal provider that stores written data in buffers separated by severity.
- * This terminal provider is designed to be used when code that prints to a terminal
- * is being unit tested.
- *
- * @beta
- */
-export declare class StringBufferTerminalProvider implements ITerminalProvider {
-    private _standardBuffer;
-    private _verboseBuffer;
-    private _debugBuffer;
-    private _warningBuffer;
-    private _errorBuffer;
-    private _supportsColor;
-    constructor(supportsColor?: boolean);
-    /**
-     * {@inheritDoc ITerminalProvider.write}
-     */
-    write(data: string, severity: TerminalProviderSeverity): void;
-    /**
-     * {@inheritDoc ITerminalProvider.eolCharacter}
-     */
-    get eolCharacter(): string;
-    /**
-     * {@inheritDoc ITerminalProvider.supportsColor}
-     */
-    get supportsColor(): boolean;
-    /**
-     * Get everything that has been written at log-level severity.
-     */
-    getOutput(options?: IStringBufferOutputOptions): string;
-    /**
-     * Get everything that has been written at verbose-level severity.
-     */
-    getVerbose(options?: IStringBufferOutputOptions): string;
-    /**
-     * Get everything that has been written at debug-level severity.
-     */
-    getDebugOutput(options?: IStringBufferOutputOptions): string;
-    /**
-     * Get everything that has been written at error-level severity.
-     */
-    getErrorOutput(options?: IStringBufferOutputOptions): string;
-    /**
-     * Get everything that has been written at warning-level severity.
-     */
-    getWarningOutput(options?: IStringBufferOutputOptions): string;
-    private _normalizeOutput;
-}
-
-/**
- * This class allows a large text string to be constructed incrementally by appending small chunks.  The final
- * string can be obtained by calling StringBuilder.toString().
- *
- * @remarks
- * A naive approach might use the `+=` operator to append strings:  This would have the downside of copying
- * the entire string each time a chunk is appended, resulting in `O(n^2)` bytes of memory being allocated
- * (and later freed by the garbage  collector), and many of the allocations could be very large objects.
- * StringBuilder avoids this overhead by accumulating the chunks in an array, and efficiently joining them
- * when `getText()` is finally called.
- *
- * @public
- */
-export declare class StringBuilder implements IStringBuilder {
-    private _chunks;
-    constructor();
-    /** {@inheritDoc IStringBuilder.append} */
-    append(text: string): void;
-    /** {@inheritDoc IStringBuilder.toString} */
-    toString(): string;
-}
-
-/**
- * When a child process is created, registering it with the SubprocessTerminator will ensure
- * that the child gets terminated when the current process terminates.
- *
- * @remarks
- * This works by hooking the current process's events for SIGTERM/SIGINT/exit, and ensuring the
- * child process gets terminated in those cases.
- *
- * SubprocessTerminator doesn't do anything on Windows, since by default Windows automatically
- * terminates child processes when their parent is terminated.
- *
- * @beta
- */
-export declare class SubprocessTerminator {
-    /**
-     * Whether the hooks are installed
-     */
-    private static _initialized;
-    /**
-     * The list of registered child processes.  Processes are removed from this set if they
-     * terminate on their own.
-     */
-    private static _subprocessesByPid;
-    private static readonly _isWindows;
-    /**
-     * The recommended options when creating a child process.
-     */
-    static readonly RECOMMENDED_OPTIONS: ISubprocessOptions;
-    /**
-     * Registers a child process so that it will be terminated automatically if the current process
-     * is terminated.
-     */
-    static killProcessTreeOnExit(subprocess: child_process.ChildProcess, subprocessOptions: ISubprocessOptions): void;
-    /**
-     * Terminate the child process and all of its children.
-     */
-    static killProcessTree(subprocess: child_process.ChildProcess, subprocessOptions: ISubprocessOptions): void;
-    private static _ensureInitialized;
-    private static _cleanupChildProcesses;
-    private static _validateSubprocessOptions;
-    private static _onExit;
-    private static _onTerminateSignal;
-    private static _logDebug;
-}
-
-/**
- * This class facilitates writing to a console.
- *
- * @beta
- */
-export declare class Terminal implements ITerminal {
-    private _providers;
-    constructor(provider: ITerminalProvider);
-    /**
-     * {@inheritdoc ITerminal.registerProvider}
-     */
-    registerProvider(provider: ITerminalProvider): void;
-    /**
-     * {@inheritdoc ITerminal.unregisterProvider}
-     */
-    unregisterProvider(provider: ITerminalProvider): void;
-    /**
-     * {@inheritdoc ITerminal.write}
-     */
-    write(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeLine}
-     */
-    writeLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeWarning}
-     */
-    writeWarning(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeWarningLine}
-     */
-    writeWarningLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeError}
-     */
-    writeError(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeErrorLine}
-     */
-    writeErrorLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeVerbose}
-     */
-    writeVerbose(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeVerboseLine}
-     */
-    writeVerboseLine(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeDebug}
-     */
-    writeDebug(...messageParts: (string | IColorableSequence)[]): void;
-    /**
-     * {@inheritdoc ITerminal.writeDebugLine}
-     */
-    writeDebugLine(...messageParts: (string | IColorableSequence)[]): void;
-    private _writeSegmentsToProviders;
-    private _serializeFormattableTextSegments;
-}
-
-/**
- * Similar to many popular logging packages, terminal providers support a range of message
- * severities. These severities have built-in formatting defaults in the Terminal object
- * (warnings are yellow, errors are red, etc.).
- *
- * Terminal providers may choose to suppress certain messages based on their severity,
- * or to route some messages to other providers or not based on severity.
- *
- *   Severity  | Purpose
- *   --------- | -------
- *   error     | Build errors and fatal issues
- *   warning   | Not necessarily fatal, but indicate a problem the user should fix
- *   log       | Informational messages
- *   verbose   | Additional information that may not always be necessary
- *   debug     | Highest detail level, best used for troubleshooting information
- *
- * @beta
- */
-export declare enum TerminalProviderSeverity {
-    log = 0,
-    warning = 1,
-    error = 2,
-    verbose = 3,
-    debug = 4
-}
-
-/**
- * Operations for working with strings that contain text.
- *
- * @remarks
- * The utilities provided by this class are intended to be simple, small, and very
- * broadly applicable.
- *
- * @public
- */
-export declare class Text {
-    private static readonly _newLineRegEx;
-    private static readonly _newLineAtEndRegEx;
-    /**
-     * Returns the same thing as targetString.replace(searchValue, replaceValue), except that
-     * all matches are replaced, rather than just the first match.
-     * @param input         - The string to be modified
-     * @param searchValue   - The value to search for
-     * @param replaceValue  - The replacement text
-     */
-    static replaceAll(input: string, searchValue: string, replaceValue: string): string;
-    /**
-     * Converts all newlines in the provided string to use Windows-style CRLF end of line characters.
-     */
-    static convertToCrLf(input: string): string;
-    /**
-     * Converts all newlines in the provided string to use POSIX-style LF end of line characters.
-     *
-     * POSIX is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc.
-     */
-    static convertToLf(input: string): string;
-    /**
-     * Converts all newlines in the provided string to use the specified newline type.
-     */
-    static convertTo(input: string, newlineKind: NewlineKind): string;
-    /**
-     * Returns the newline character sequence for the specified `NewlineKind`.
-     */
-    static getNewline(newlineKind: NewlineKind): string;
-    /**
-     * Append characters to the end of a string to ensure the result has a minimum length.
-     * @remarks
-     * If the string length already exceeds the minimum length, then the string is unchanged.
-     * The string is not truncated.
-     */
-    static padEnd(s: string, minimumLength: number, paddingCharacter?: string): string;
-    /**
-     * Append characters to the start of a string to ensure the result has a minimum length.
-     * @remarks
-     * If the string length already exceeds the minimum length, then the string is unchanged.
-     * The string is not truncated.
-     */
-    static padStart(s: string, minimumLength: number, paddingCharacter?: string): string;
-    /**
-     * If the string is longer than maximumLength characters, truncate it to that length
-     * using "..." to indicate the truncation.
-     *
-     * @remarks
-     * For example truncateWithEllipsis('1234578', 5) would produce '12...'.
-     */
-    static truncateWithEllipsis(s: string, maximumLength: number): string;
-    /**
-     * Returns the input string with a trailing `\n` character appended, if not already present.
-     */
-    static ensureTrailingNewline(s: string, newlineKind?: NewlineKind): string;
-}
-
-/**
- * Text styles used with {@link IColorableSequence}.
- * @beta
- */
-export declare enum TextAttribute {
-    Bold = 0,
-    Dim = 1,
-    Underline = 2,
-    Blink = 3,
-    InvertColor = 4,
-    Hidden = 5
-}
-
-/**
- * Provides a version-independent implementation of the JavaScript `instanceof` operator.
- *
- * @remarks
- * The JavaScript `instanceof` operator normally only identifies objects from a particular library instance.
- * For example, suppose the NPM package `example-lib` has two published versions 1.2.0 and 1.3.0, and
- * it exports a class called `A`.  Suppose some code consumes version `1.3.0` of the library, but it receives
- * an object that was constructed using version `1.2.0`.  In this situation `a instanceof A` will return `false`,
- * even though `a` is an instance of `A`.  The reason is that there are two prototypes for `A`; one for each
- * version.
- *
- * The `TypeUuid` facility provides a way to make `a instanceof A` return true for both prototypes of `A`,
- * by instead using a universally unique identifier (UUID) to detect object instances.
- *
- * You can use `Symbol.hasInstance` to enable the system `instanceof` operator to recognize type UUID equivalence:
- * ```ts
- * const uuidWidget: string = '9c340ef0-d29f-4e2e-a09f-42bacc59024b';
- * class Widget {
- *   public static [Symbol.hasInstance](instance: object): boolean {
- *     return TypeUuid.isInstanceOf(instance, uuidWidget);
- *   }
- * }
- * ```
- * // Example usage:
- * ```ts
- * import { Widget as Widget1 } from 'v1-of-library';
- * import { Widget as Widget2 } from 'v2-of-library';
- * const widget = new Widget2();
- * console.log(widget instanceof Widget1); // prints true
- * ```
- *
- * @public
- */
-export declare class TypeUuid {
-    private static _uuidRegExp;
-    /**
-     * Registers a JavaScript class as having a type identified by the specified UUID.
-     * @privateRemarks
-     * We cannot use a construct signature for `targetClass` because it may be an abstract class.
-     */
-    static registerClass(targetClass: any, typeUuid: string): void;
-    /**
-     * Returns true if the `targetObject` is an instance of a JavaScript class that was previously
-     * registered using the specified `typeUuid`.  Base classes are also considered.
-     */
-    static isInstanceOf(targetObject: unknown, typeUuid: string): boolean;
-}
-
-export { }