tirecheck-device-sdk 0.2.67 → 0.2.69

package/dist/index.cjs

@@ -254,7 +254,7 @@ const bridgeTools = {
   },
   convertBarToKpaByte(deviceId, value) {
     if (!value) return 0;
-    const bitValue = this.usesKpaPressure(deviceId) ? 1 : 5.0625;
+    const bitValue = bridgeUsesKpaPressure(deviceId) ? 1 : 5.0625;
     return ___default.round((value + 1) * 100 / bitValue);
   },
   convertSensorIdForBridge(sensorId) {
@@ -277,7 +277,7 @@ const bridgeTools = {
     if (!___default.isNumber(value)) {
       throw new TypeError("Value has to be a number");
     }
-    const bitValue = this.usesKpaPressure(deviceId) ? 1 : 5.0625;
+    const bitValue = bridgeUsesKpaPressure(deviceId) ? 1 : 5.0625;
     const rawBar = value * bitValue / 100;
     return ___default.round(Math.max(rawBar - decrementValue, 0), 1);
   },
@@ -292,7 +292,7 @@ const bridgeTools = {
     return false;
   },
   usesKpaPressure(deviceId) {
-    return this.isVersionGreaterThan(deviceId, "1.1.F");
+    return bridgeUsesKpaPressure(deviceId);
   },
   convertSensorIdFromBridge(sensorId) {
     if (sensorId.startsWith("B")) {
@@ -374,6 +374,9 @@ function getBridgeFromStore(deviceId) {
   if (deviceData.type !== "bridge") throw new Error("Device is not bridge");
   return deviceData;
 }
+function bridgeUsesKpaPressure(deviceId) {
+  return getBridgeFromStore(deviceId).name === "030717";
+}
 function getDefaultTyreLabels() {
   const tyreLabelsStr = "_L;_R;_LO;_LI;_RI;_RO;_";
   const tyreLabelsStrLoc = tyreLabelsStr;
@@ -1274,7 +1277,7 @@ const bridgeCommandStructures = {
     }
   },
   /**
-   * kPa per-axle pressure layout used from FW 1.2.0 onwards (same sub-command 0x30 as `pressuresPerAxle`).
+   * kPa per-axle pressure layout used by the 030717 bridge model (same sub-command 0x30 as `pressuresPerAxle`).
    * Each axle packs the same three values (set; min; max) but every value is a 2-byte little-endian raw kPa
    * uint16 (no 5.0625 bit scaling), so each axle is 6 bytes instead of 3. Selected at runtime via
    * `bridgeTools.usesKpaPressure(deviceId)`.
@@ -1718,6 +1721,48 @@ const bridgeCommandStructures = {
       }
     }
   },
+  errorHistoryCounter: {
+    id: [98, 112],
+    name: "errorHistoryCounter",
+    structure: {
+      hwErrorCounter: {
+        size: 1,
+        description: "HW Error Counter",
+        display: "decimal"
+      },
+      powerUpCounter: {
+        size: 1,
+        description: "Power-up Counter",
+        display: "decimal"
+      },
+      configErrorCounter: {
+        size: 1,
+        description: "Config. Error Counter",
+        display: "decimal"
+      },
+      swErrorCounter: {
+        size: 1,
+        description: "SW Error Counter",
+        display: "decimal"
+      }
+    }
+  },
+  eolStatus: {
+    id: [98, 128],
+    name: "eolStatus",
+    structure: {
+      eolStatus: {
+        size: 1,
+        description: "End of Line status code",
+        display: "decimal"
+      },
+      eolCounter: {
+        size: 1,
+        description: "End of Line counter value",
+        display: "decimal"
+      }
+    }
+  },
   firmwareVersion: {
     id: [98, 144],
     name: "firmwareVersion",
@@ -2239,6 +2284,28 @@ const bridgeCommands = {
       deviceData.advertisingData.fwVersion
     );
   },
+  async getErrorHistoryCounter(deviceId) {
+    const deviceData = bridgeTools.getBridgeFromStore(deviceId);
+    const result = await this.readCommand(deviceData, subCommandIds.errorHistoryCounter, {
+      headerLength: 5,
+      footerLength: 0
+    });
+    return bridgeTools.convertBytesToStructure(
+      bridgeCommandStructures.errorHistoryCounter.structure,
+      result.data,
+      deviceData.advertisingData.fwVersion
+    );
+  },
+  async getEolStatus(deviceId) {
+    const deviceData = bridgeTools.getBridgeFromStore(deviceId);
+    const result = await this.readCommand(deviceData, subCommandIds.eolStatus);
+    const structurized = bridgeTools.convertBytesToStructure(
+      bridgeCommandStructures.eolStatus.structure,
+      result.data,
+      deviceData.advertisingData.fwVersion
+    );
+    return { ...structurized, isFactory: result.isFactory };
+  },
   async getSensorMeasurement(deviceId, positionId) {
     const deviceData = bridgeTools.getBridgeFromStore(deviceId);
     const isSpare = String(positionId).endsWith("0");
@@ -2407,9 +2474,15 @@ async function getConfiguration(deviceId, includeVehicleData = false) {
   const customerImbalanceThresholds = await bridgeCommands.getCustomerImbalanceThresholds(deviceId);
   const pressuresPerAxle = await bridgeCommands.getPressuresPerAxle(deviceId);
   let autolearnSettings;
+  let errorHistoryCounter;
+  let eolStatus;
   if (bridgeTools.isVersionGreaterThan(deviceId, "0.9.7")) {
     autolearnSettings = await bridgeCommands.getAutolearnSettings(deviceId);
   }
+  if (bridgeTools.isVersionGreaterThan(deviceId, "1.1.F")) {
+    errorHistoryCounter = await bridgeCommands.getErrorHistoryCounter(deviceId);
+    eolStatus = await bridgeCommands.getEolStatus(deviceId);
+  }
   const configuration = {
     customerCANSettings,
     workshopCANSettings,
@@ -2417,7 +2490,9 @@ async function getConfiguration(deviceId, includeVehicleData = false) {
     customerTemperatureThresholds,
     customerImbalanceThresholds,
     pressuresPerAxle,
-    autolearnSettings
+    autolearnSettings,
+    errorHistoryCounter,
+    eolStatus
   };
   if (includeVehicleData) {
     configuration.vehicleLayout = await bridgeCommands.getVehicleLayout(deviceId);

package/dist/index.d.cts

@@ -420,7 +420,7 @@ declare const _default: {
         };
     };
     /**
-     * kPa per-axle pressure layout used from FW 1.2.0 onwards (same sub-command 0x30 as `pressuresPerAxle`).
+     * kPa per-axle pressure layout used by the 030717 bridge model (same sub-command 0x30 as `pressuresPerAxle`).
      * Each axle packs the same three values (set; min; max) but every value is a 2-byte little-endian raw kPa
      * uint16 (no 5.0625 bit scaling), so each axle is 6 bytes instead of 3. Selected at runtime via
      * `bridgeTools.usesKpaPressure(deviceId)`.
@@ -863,6 +863,48 @@ declare const _default: {
             };
         };
     };
+    errorHistoryCounter: {
+        id: number[];
+        name: string;
+        structure: {
+            hwErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            powerUpCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            configErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            swErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+        };
+    };
+    eolStatus: {
+        id: number[];
+        name: string;
+        structure: {
+            eolStatus: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            eolCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+        };
+    };
     firmwareVersion: {
         id: number[];
         name: string;
@@ -970,6 +1012,10 @@ interface BridgeConfiguration {
     customerTemperatureThresholds: BridgeCommandStructurized<typeof _default.axleTemperatureThresholds.structure>;
     customerImbalanceThresholds: BridgeCommandStructurized<typeof _default.axleImbalanceThresholds.structure>;
     pressuresPerAxle: BridgeCommandStructurized<typeof _default.pressuresPerAxle.structure>;
+    /** only available after 1.1.F fw */
+    errorHistoryCounter?: BridgeCommandStructurized<typeof _default.errorHistoryCounter.structure>;
+    /** only available after 1.1.F fw */
+    eolStatus?: BridgeCommandStructurized<typeof _default.eolStatus.structure>;
     /** only available after 0.9.8 fw */
     autolearnSettings?: BridgeCommandStructurized<typeof _default.autolearnSettings.structure>;
     vehicleLayout?: BridgeCommandStructurized<typeof _default.vehicleLayout.structure>;

package/dist/index.d.mts

@@ -420,7 +420,7 @@ declare const _default: {
         };
     };
     /**
-     * kPa per-axle pressure layout used from FW 1.2.0 onwards (same sub-command 0x30 as `pressuresPerAxle`).
+     * kPa per-axle pressure layout used by the 030717 bridge model (same sub-command 0x30 as `pressuresPerAxle`).
      * Each axle packs the same three values (set; min; max) but every value is a 2-byte little-endian raw kPa
      * uint16 (no 5.0625 bit scaling), so each axle is 6 bytes instead of 3. Selected at runtime via
      * `bridgeTools.usesKpaPressure(deviceId)`.
@@ -863,6 +863,48 @@ declare const _default: {
             };
         };
     };
+    errorHistoryCounter: {
+        id: number[];
+        name: string;
+        structure: {
+            hwErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            powerUpCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            configErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            swErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+        };
+    };
+    eolStatus: {
+        id: number[];
+        name: string;
+        structure: {
+            eolStatus: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            eolCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+        };
+    };
     firmwareVersion: {
         id: number[];
         name: string;
@@ -970,6 +1012,10 @@ interface BridgeConfiguration {
     customerTemperatureThresholds: BridgeCommandStructurized<typeof _default.axleTemperatureThresholds.structure>;
     customerImbalanceThresholds: BridgeCommandStructurized<typeof _default.axleImbalanceThresholds.structure>;
     pressuresPerAxle: BridgeCommandStructurized<typeof _default.pressuresPerAxle.structure>;
+    /** only available after 1.1.F fw */
+    errorHistoryCounter?: BridgeCommandStructurized<typeof _default.errorHistoryCounter.structure>;
+    /** only available after 1.1.F fw */
+    eolStatus?: BridgeCommandStructurized<typeof _default.eolStatus.structure>;
     /** only available after 0.9.8 fw */
     autolearnSettings?: BridgeCommandStructurized<typeof _default.autolearnSettings.structure>;
     vehicleLayout?: BridgeCommandStructurized<typeof _default.vehicleLayout.structure>;

package/dist/index.d.ts

@@ -420,7 +420,7 @@ declare const _default: {
         };
     };
     /**
-     * kPa per-axle pressure layout used from FW 1.2.0 onwards (same sub-command 0x30 as `pressuresPerAxle`).
+     * kPa per-axle pressure layout used by the 030717 bridge model (same sub-command 0x30 as `pressuresPerAxle`).
      * Each axle packs the same three values (set; min; max) but every value is a 2-byte little-endian raw kPa
      * uint16 (no 5.0625 bit scaling), so each axle is 6 bytes instead of 3. Selected at runtime via
      * `bridgeTools.usesKpaPressure(deviceId)`.
@@ -863,6 +863,48 @@ declare const _default: {
             };
         };
     };
+    errorHistoryCounter: {
+        id: number[];
+        name: string;
+        structure: {
+            hwErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            powerUpCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            configErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            swErrorCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+        };
+    };
+    eolStatus: {
+        id: number[];
+        name: string;
+        structure: {
+            eolStatus: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+            eolCounter: {
+                size: number;
+                description: string;
+                display: "decimal";
+            };
+        };
+    };
     firmwareVersion: {
         id: number[];
         name: string;
@@ -970,6 +1012,10 @@ interface BridgeConfiguration {
     customerTemperatureThresholds: BridgeCommandStructurized<typeof _default.axleTemperatureThresholds.structure>;
     customerImbalanceThresholds: BridgeCommandStructurized<typeof _default.axleImbalanceThresholds.structure>;
     pressuresPerAxle: BridgeCommandStructurized<typeof _default.pressuresPerAxle.structure>;
+    /** only available after 1.1.F fw */
+    errorHistoryCounter?: BridgeCommandStructurized<typeof _default.errorHistoryCounter.structure>;
+    /** only available after 1.1.F fw */
+    eolStatus?: BridgeCommandStructurized<typeof _default.eolStatus.structure>;
     /** only available after 0.9.8 fw */
     autolearnSettings?: BridgeCommandStructurized<typeof _default.autolearnSettings.structure>;
     vehicleLayout?: BridgeCommandStructurized<typeof _default.vehicleLayout.structure>;

package/dist/index.mjs

@@ -247,7 +247,7 @@ const bridgeTools = {
   },
   convertBarToKpaByte(deviceId, value) {
     if (!value) return 0;
-    const bitValue = this.usesKpaPressure(deviceId) ? 1 : 5.0625;
+    const bitValue = bridgeUsesKpaPressure(deviceId) ? 1 : 5.0625;
     return _.round((value + 1) * 100 / bitValue);
   },
   convertSensorIdForBridge(sensorId) {
@@ -270,7 +270,7 @@ const bridgeTools = {
     if (!_.isNumber(value)) {
       throw new TypeError("Value has to be a number");
     }
-    const bitValue = this.usesKpaPressure(deviceId) ? 1 : 5.0625;
+    const bitValue = bridgeUsesKpaPressure(deviceId) ? 1 : 5.0625;
     const rawBar = value * bitValue / 100;
     return _.round(Math.max(rawBar - decrementValue, 0), 1);
   },
@@ -285,7 +285,7 @@ const bridgeTools = {
     return false;
   },
   usesKpaPressure(deviceId) {
-    return this.isVersionGreaterThan(deviceId, "1.1.F");
+    return bridgeUsesKpaPressure(deviceId);
   },
   convertSensorIdFromBridge(sensorId) {
     if (sensorId.startsWith("B")) {
@@ -367,6 +367,9 @@ function getBridgeFromStore(deviceId) {
   if (deviceData.type !== "bridge") throw new Error("Device is not bridge");
   return deviceData;
 }
+function bridgeUsesKpaPressure(deviceId) {
+  return getBridgeFromStore(deviceId).name === "030717";
+}
 function getDefaultTyreLabels() {
   const tyreLabelsStr = "_L;_R;_LO;_LI;_RI;_RO;_";
   const tyreLabelsStrLoc = tyreLabelsStr;
@@ -1267,7 +1270,7 @@ const bridgeCommandStructures = {
     }
   },
   /**
-   * kPa per-axle pressure layout used from FW 1.2.0 onwards (same sub-command 0x30 as `pressuresPerAxle`).
+   * kPa per-axle pressure layout used by the 030717 bridge model (same sub-command 0x30 as `pressuresPerAxle`).
    * Each axle packs the same three values (set; min; max) but every value is a 2-byte little-endian raw kPa
    * uint16 (no 5.0625 bit scaling), so each axle is 6 bytes instead of 3. Selected at runtime via
    * `bridgeTools.usesKpaPressure(deviceId)`.
@@ -1711,6 +1714,48 @@ const bridgeCommandStructures = {
       }
     }
   },
+  errorHistoryCounter: {
+    id: [98, 112],
+    name: "errorHistoryCounter",
+    structure: {
+      hwErrorCounter: {
+        size: 1,
+        description: "HW Error Counter",
+        display: "decimal"
+      },
+      powerUpCounter: {
+        size: 1,
+        description: "Power-up Counter",
+        display: "decimal"
+      },
+      configErrorCounter: {
+        size: 1,
+        description: "Config. Error Counter",
+        display: "decimal"
+      },
+      swErrorCounter: {
+        size: 1,
+        description: "SW Error Counter",
+        display: "decimal"
+      }
+    }
+  },
+  eolStatus: {
+    id: [98, 128],
+    name: "eolStatus",
+    structure: {
+      eolStatus: {
+        size: 1,
+        description: "End of Line status code",
+        display: "decimal"
+      },
+      eolCounter: {
+        size: 1,
+        description: "End of Line counter value",
+        display: "decimal"
+      }
+    }
+  },
   firmwareVersion: {
     id: [98, 144],
     name: "firmwareVersion",
@@ -2232,6 +2277,28 @@ const bridgeCommands = {
       deviceData.advertisingData.fwVersion
     );
   },
+  async getErrorHistoryCounter(deviceId) {
+    const deviceData = bridgeTools.getBridgeFromStore(deviceId);
+    const result = await this.readCommand(deviceData, subCommandIds.errorHistoryCounter, {
+      headerLength: 5,
+      footerLength: 0
+    });
+    return bridgeTools.convertBytesToStructure(
+      bridgeCommandStructures.errorHistoryCounter.structure,
+      result.data,
+      deviceData.advertisingData.fwVersion
+    );
+  },
+  async getEolStatus(deviceId) {
+    const deviceData = bridgeTools.getBridgeFromStore(deviceId);
+    const result = await this.readCommand(deviceData, subCommandIds.eolStatus);
+    const structurized = bridgeTools.convertBytesToStructure(
+      bridgeCommandStructures.eolStatus.structure,
+      result.data,
+      deviceData.advertisingData.fwVersion
+    );
+    return { ...structurized, isFactory: result.isFactory };
+  },
   async getSensorMeasurement(deviceId, positionId) {
     const deviceData = bridgeTools.getBridgeFromStore(deviceId);
     const isSpare = String(positionId).endsWith("0");
@@ -2400,9 +2467,15 @@ async function getConfiguration(deviceId, includeVehicleData = false) {
   const customerImbalanceThresholds = await bridgeCommands.getCustomerImbalanceThresholds(deviceId);
   const pressuresPerAxle = await bridgeCommands.getPressuresPerAxle(deviceId);
   let autolearnSettings;
+  let errorHistoryCounter;
+  let eolStatus;
   if (bridgeTools.isVersionGreaterThan(deviceId, "0.9.7")) {
     autolearnSettings = await bridgeCommands.getAutolearnSettings(deviceId);
   }
+  if (bridgeTools.isVersionGreaterThan(deviceId, "1.1.F")) {
+    errorHistoryCounter = await bridgeCommands.getErrorHistoryCounter(deviceId);
+    eolStatus = await bridgeCommands.getEolStatus(deviceId);
+  }
   const configuration = {
     customerCANSettings,
     workshopCANSettings,
@@ -2410,7 +2483,9 @@ async function getConfiguration(deviceId, includeVehicleData = false) {
     customerTemperatureThresholds,
     customerImbalanceThresholds,
     pressuresPerAxle,
-    autolearnSettings
+    autolearnSettings,
+    errorHistoryCounter,
+    eolStatus
   };
   if (includeVehicleData) {
     configuration.vehicleLayout = await bridgeCommands.getVehicleLayout(deviceId);

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "tirecheck-device-sdk",
-  "version": "0.2.67",
+  "version": "0.2.69",
   "description": "SDK for working with various devices produced by Tirecheck via Bluetooth (CAN Bridge, Routers, Sensors, FlexiGauge, PressureStick, etc)",
   "author": "Leonid Buneev <leonid.buneev@tirecheck.com>",
   "license": "ISC",