three-slicer 0.4.1 → 0.4.2

package/data/ui-tree.json

@@ -137,7 +137,8 @@
       "min_width_top_surface",
       "reduce_crossing_wall",
       "max_travel_detour_distance",
-      "small_area_infill_flow_compensation"
+      "small_area_infill_flow_compensation",
+      "small_area_infill_flow_compensation_model"
      ]
     },
     {
@@ -301,9 +302,21 @@
      "options": [
       "enable_overhang_speed",
       "slowdown_for_curled_perimeters",
-      "<custom-widget line:2887>",
-      "<custom-widget line:2892>"
-     ]
+      "overhang_1_4_speed",
+      "overhang_2_4_speed",
+      "overhang_3_4_speed",
+      "overhang_4_4_speed",
+      "bridge_speed",
+      "internal_bridge_speed"
+     ],
+     "line_titles": {
+      "overhang_1_4_speed": "Overhang speed",
+      "overhang_2_4_speed": "Overhang speed",
+      "overhang_3_4_speed": "Overhang speed",
+      "overhang_4_4_speed": "Overhang speed",
+      "bridge_speed": "Bridge",
+      "internal_bridge_speed": "Bridge"
+     }
     },
     {
      "group": "Travel speed",
@@ -611,35 +624,42 @@
       "gcode_add_line_number",
       "gcode_comments",
       "gcode_label_objects",
-      "exclude_object"
+      "exclude_object",
+      "filename_format"
      ]
     },
     {
      "group": "Change extrusion role G-code",
      "line": 3113,
-     "options": []
+     "options": [
+      "process_change_extrusion_role_gcode"
+     ]
     },
     {
      "group": "Post-processing Scripts",
      "line": 3124,
-     "options": []
+     "options": [
+      "post_process"
+     ]
     },
     {
      "group": "Slicing Pipeline Plugin",
      "line": 3131,
-     "options": []
+     "options": [
+      "slicing_pipeline_plugin"
+     ]
     },
     {
      "group": "Plugin Configuration",
      "line": 3139,
-     "options": [
-      "print_plugin_config_overrides"
-     ]
+     "options": []
     },
     {
      "group": "Notes",
      "line": 3142,
-     "options": []
+     "options": [
+      "notes"
+     ]
     }
    ]
   }
@@ -727,8 +747,13 @@
       "filament_cost",
       "temperature_vitrification",
       "idle_temperature",
-      "<custom-widget line:4302>"
-     ]
+      "nozzle_temperature_range_low",
+      "nozzle_temperature_range_high"
+     ],
+     "line_titles": {
+      "nozzle_temperature_range_low": "Recommended nozzle temperature",
+      "nozzle_temperature_range_high": "Recommended nozzle temperature"
+     }
     },
     {
      "group": "Flow ratio and Pressure Advance",
@@ -740,7 +765,8 @@
       "pressure_advance",
       "adaptive_pressure_advance",
       "adaptive_pressure_advance_overhangs",
-      "adaptive_pressure_advance_bridges"
+      "adaptive_pressure_advance_bridges",
+      "adaptive_pressure_advance_model"
      ]
     },
     {
@@ -748,27 +774,57 @@
      "line": 4343,
      "options": [
       "activate_chamber_temp_control",
-      "<custom-widget line:4353>"
-     ]
+      "chamber_temperature",
+      "chamber_minimal_temperature"
+     ],
+     "line_titles": {
+      "chamber_temperature": "Chamber temperature",
+      "chamber_minimal_temperature": "Chamber temperature"
+     }
     },
     {
      "group": "Print temperature",
      "line": 4369,
      "options": [
-      "<custom-widget line:4374>"
-     ]
+      "nozzle_temperature_initial_layer",
+      "nozzle_temperature"
+     ],
+     "line_titles": {
+      "nozzle_temperature_initial_layer": "Nozzle",
+      "nozzle_temperature": "Nozzle"
+     }
     },
     {
      "group": "Bed temperature",
      "line": 4376,
      "options": [
-      "<custom-widget line:4382>",
-      "<custom-widget line:4389>",
-      "<custom-widget line:4396>",
-      "<custom-widget line:4403>",
-      "<custom-widget line:4410>",
-      "<custom-widget line:4417>"
-     ]
+      "supertack_plate_temp_initial_layer",
+      "supertack_plate_temp",
+      "cool_plate_temp_initial_layer",
+      "cool_plate_temp",
+      "textured_cool_plate_temp_initial_layer",
+      "textured_cool_plate_temp",
+      "eng_plate_temp_initial_layer",
+      "eng_plate_temp",
+      "hot_plate_temp_initial_layer",
+      "hot_plate_temp",
+      "textured_plate_temp_initial_layer",
+      "textured_plate_temp"
+     ],
+     "line_titles": {
+      "supertack_plate_temp_initial_layer": "Cool Plate (SuperTack)",
+      "supertack_plate_temp": "Cool Plate (SuperTack)",
+      "cool_plate_temp_initial_layer": "Cool Plate",
+      "cool_plate_temp": "Cool Plate",
+      "textured_cool_plate_temp_initial_layer": "Textured Cool Plate",
+      "textured_cool_plate_temp": "Textured Cool Plate",
+      "eng_plate_temp_initial_layer": "Engineering Plate",
+      "eng_plate_temp": "Engineering Plate",
+      "hot_plate_temp_initial_layer": "Smooth PEI Plate / High Temp Plate",
+      "hot_plate_temp": "Smooth PEI Plate / High Temp Plate",
+      "textured_plate_temp_initial_layer": "Textured PEI Plate",
+      "textured_plate_temp": "Textured PEI Plate"
+     }
     },
     {
      "group": "Volumetric speed limitation",
@@ -798,8 +854,10 @@
      "group": "Part cooling fan",
      "line": 4472,
      "options": [
-      "<custom-widget line:4477>",
-      "<custom-widget line:4482>",
+      "fan_min_speed",
+      "fan_cooling_layer_time",
+      "fan_max_speed",
+      "slow_down_layer_time",
       "reduce_fan_stop_start_freq",
       "slow_down_for_layer_cooling",
       "dont_slow_down_outer_wall",
@@ -810,7 +868,13 @@
       "internal_bridge_fan_speed",
       "support_material_interface_fan_speed",
       "ironing_fan_speed"
-     ]
+     ],
+     "line_titles": {
+      "fan_min_speed": "Min fan speed threshold",
+      "fan_cooling_layer_time": "Min fan speed threshold",
+      "fan_max_speed": "Max fan speed threshold",
+      "slow_down_layer_time": "Max fan speed threshold"
+     }
     },
     {
      "group": "Auxiliary part cooling fan",
@@ -824,9 +888,17 @@
      "line": 4498,
      "options": [
       "activate_air_filtration",
-      "<custom-widget line:4506>",
-      "<custom-widget line:4513>"
-     ]
+      "activate_air_filtration_during_print",
+      "during_print_exhaust_fan_speed",
+      "activate_air_filtration_on_completion",
+      "complete_print_exhaust_fan_speed"
+     ],
+     "line_titles": {
+      "activate_air_filtration_during_print": "During print",
+      "during_print_exhaust_fan_speed": "During print",
+      "activate_air_filtration_on_completion": "Complete print",
+      "complete_print_exhaust_fan_speed": "Complete print"
+     }
     }
    ]
   },
@@ -838,24 +910,28 @@
     {
      "group": "Filament start G-code",
      "line": 4522,
-     "options": []
+     "options": [
+      "filament_start_gcode"
+     ]
     },
     {
      "group": "Change extrusion role G-code",
      "line": 4533,
-     "options": []
+     "options": [
+      "filament_change_extrusion_role_gcode"
+     ]
     },
     {
      "group": "Filament end G-code",
      "line": 4544,
-     "options": []
+     "options": [
+      "filament_end_gcode"
+     ]
     },
     {
      "group": "Plugin Configuration",
      "line": 4555,
-     "options": [
-      "filament_plugin_config_overrides"
-     ]
+     "options": []
     }
    ]
   },
@@ -919,12 +995,16 @@
     {
      "group": "Compatible printers",
      "line": 4609,
-     "options": []
+     "options": [
+      "compatible_printers_condition"
+     ]
     },
     {
      "group": "Compatible process profiles",
      "line": 4618,
-     "options": []
+     "options": [
+      "compatible_prints_condition"
+     ]
     }
    ]
   },
@@ -936,7 +1016,9 @@
     {
      "group": "Notes",
      "line": 4628,
-     "options": []
+     "options": [
+      "filament_notes"
+     ]
     }
    ]
   }
@@ -952,6 +1034,7 @@
      "line": 4989,
      "options": [
       "parallel_printheads_count",
+      "bed_exclude_area",
       "printable_height",
       "support_multi_bed_types",
       "best_object_pos",
@@ -971,6 +1054,7 @@
       "scan_first_layer",
       "enable_power_loss_recovery",
       "disable_m73",
+      "thumbnails",
       "use_relative_e_distances",
       "use_firmware_retraction",
       "time_cost"
@@ -979,18 +1063,21 @@
     {
      "group": "Plugin Configuration",
      "line": 5064,
-     "options": [
-      "printer_plugin_config_overrides"
-     ]
+     "options": []
     },
     {
      "group": "Cooling Fan",
      "line": 5067,
      "options": [
-      "<custom-widget line:5072>",
+      "fan_speedup_time",
+      "fan_speedup_overhangs",
       "fan_kickstart",
       "part_cooling_fan_min_pwm"
-     ]
+     ],
+     "line_titles": {
+      "fan_speedup_time": "Fan speed-up time",
+      "fan_speedup_overhangs": "Fan speed-up time"
+     }
     },
     {
      "group": "Extruder Clearance",
@@ -1034,62 +1121,86 @@
     {
      "group": "File header G-code",
      "line": 5102,
-     "options": []
+     "options": [
+      "file_start_gcode"
+     ]
     },
     {
      "group": "Machine start G-code",
      "line": 5113,
-     "options": []
+     "options": [
+      "machine_start_gcode"
+     ]
     },
     {
      "group": "Machine end G-code",
      "line": 5124,
-     "options": []
+     "options": [
+      "machine_end_gcode"
+     ]
     },
     {
      "group": "Printing by object G-code",
      "line": 5135,
-     "options": []
+     "options": [
+      "printing_by_object_gcode"
+     ]
     },
     {
      "group": "Before layer change G-code",
      "line": 5147,
-     "options": []
+     "options": [
+      "before_layer_change_gcode"
+     ]
     },
     {
      "group": "Layer change G-code",
      "line": 5158,
-     "options": []
+     "options": [
+      "layer_change_gcode"
+     ]
     },
     {
      "group": "Timelapse G-code",
      "line": 5169,
-     "options": []
+     "options": [
+      "time_lapse_gcode"
+     ]
     },
     {
      "group": "Clumping Detection G-code",
      "line": 5180,
-     "options": []
+     "options": [
+      "wrapping_detection_gcode"
+     ]
     },
     {
      "group": "Change filament G-code",
      "line": 5191,
-     "options": []
+     "options": [
+      "change_filament_gcode"
+     ]
     },
     {
      "group": "Change extrusion role G-code",
      "line": 5202,
-     "options": []
+     "options": [
+      "change_extrusion_role_gcode"
+     ]
     },
     {
      "group": "Pause G-code",
      "line": 5213,
-     "options": []
+     "options": [
+      "machine_pause_gcode"
+     ]
     },
     {
      "group": "Template Custom G-code",
      "line": 5223,
-     "options": []
+     "options": [
+      "template_custom_gcode"
+     ]
     }
    ]
   },
@@ -1101,7 +1212,9 @@
     {
      "group": "Notes",
      "line": 5234,
-     "options": []
+     "options": [
+      "printer_notes"
+     ]
     }
    ]
   }
@@ -1124,11 +1237,14 @@
      "line": 5378,
      "options": [
       "resonance_avoidance",
-      "<custom-widget line:5386>",
+      "min_resonance_avoidance_speed",
+      "max_resonance_avoidance_speed",
       "input_shaping_emit",
       "input_shaping_type",
-      "<custom-widget line:5395>",
-      "<custom-widget line:5402>"
+      "input_shaping_freq_x",
+      "input_shaping_freq_y",
+      "input_shaping_damp_x",
+      "input_shaping_damp_y"
      ]
     },
     {
@@ -1219,7 +1335,8 @@
      "options": [
       "nozzle_diameter",
       "nozzle_volume",
-      "extruder_printable_height"
+      "extruder_printable_height",
+      "extruder_printable_area"
      ]
     },
     {
@@ -1287,9 +1404,7 @@
     {
      "group": "Size and coordinates",
      "line": 3017,
-     "options": [
-      "max_print_height"
-     ]
+     "options": []
     },
     {
      "group": "Display",
@@ -1297,7 +1412,8 @@
      "options": [
       "display_width",
       "display_height",
-      "<custom-widget line:3032>",
+      "display_pixels_x",
+      "display_pixels_y",
       "display_orientation",
       "display_mirror_x",
       "display_mirror_y"
@@ -1307,14 +1423,23 @@
      "group": "Tilt",
      "line": 3039,
      "options": [
-      "<custom-widget line:3044>"
-     ]
+      "fast_tilt_time",
+      "slow_tilt_time",
+      "high_viscosity_tilt_time"
+     ],
+     "line_titles": {
+      "fast_tilt_time": "Tilt time",
+      "slow_tilt_time": "Tilt time",
+      "high_viscosity_tilt_time": "Tilt time"
+     }
     },
     {
      "group": "Corrections",
      "line": 3046,
      "options": [
-      "<custom-widget line:3053>",
+      "relative_correction_x",
+      "relative_correction_y",
+      "relative_correction_z",
       "absolute_correction",
       "elefant_foot_compensation",
       "elefant_foot_min_width",
@@ -1349,7 +1474,9 @@
     {
      "group": "Notes",
      "line": 3075,
-     "options": []
+     "options": [
+      "printer_notes"
+     ]
     }
    ]
   },
@@ -1402,9 +1529,10 @@
      "group": "Corrections",
      "line": 5485,
      "options": [
-      "<custom-widget line:5492>",
-      "zcorrection_layers",
-      "<custom-widget line:5502>"
+      "material_correction_x",
+      "material_correction_y",
+      "material_correction_z",
+      "zcorrection_layers"
      ]
     }
    ]
@@ -1417,7 +1545,9 @@
     {
      "group": "Notes",
      "line": 5507,
-     "options": []
+     "options": [
+      "material_notes"
+     ]
     }
    ]
   },
@@ -1429,7 +1559,10 @@
     {
      "group": "Profile dependencies",
      "line": 5515,
-     "options": []
+     "options": [
+      "compatible_printers_condition",
+      "compatible_prints_condition"
+     ]
     }
    ]
   },
@@ -1456,8 +1589,8 @@
      "group": "Temperature",
      "line": 5543,
      "options": [
-      "<custom-widget line:5560>",
-      "<custom-widget line:5590>"
+      "compatible_prints_condition",
+      "compatible_prints_condition"
      ]
     }
    ]
@@ -1523,8 +1656,7 @@
       "support_base_diameter",
       "support_base_height",
       "support_base_safety_distance",
-      "support_object_elevation",
-      "<custom-widget line:5890>"
+      "support_object_elevation"
      ]
     },
     {
@@ -1615,7 +1747,9 @@
     {
      "group": "Profile dependencies",
      "line": 6121,
-     "options": []
+     "options": [
+      "compatible_printers_condition"
+     ]
     }
    ]
   }

package/engine/PARAMS.md

@@ -8,8 +8,8 @@ cannot drift from what `slice()` actually honours. Regenerate with `node types/g
 
 <!-- KERNEL-PARAMS:BEGIN — generated by types/gen_kernel_params.mjs, do not edit by hand -->
 
-The kernel accepts **238 parameters**. `deriveKernelParams()` produces 209 of them from the
-OrcaSlicer settings map; the remaining 29 have no schema key behind them and can only be set by writing
+The kernel accepts **241 parameters**. `deriveKernelParams()` produces 209 of them from the
+OrcaSlicer settings map; the remaining 32 have no schema key behind them and can only be set by writing
 the params object directly — those rows show `—` in the *From setting* column.
 
 A parameter left out of the object keeps the default listed here, so sending a partial object is normal and is
@@ -105,6 +105,8 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `retract_speed` | `number` | `30.0` | `filament_retraction_speed`, `retraction_speed` | retraction_length/speed[0], z_hop[0] |
 | `retraction_minimum_travel` | `number` | `2.0` | `filament_retraction_minimum_travel`, `retraction_minimum_travel` | retraction_minimum_travel (mm): minimum travel that triggers a retraction |
 | `scarf_length` | `number` | `10.0` | — | length of the scarf z/flow ramp (mm) |
+| `seam_blockers` | `number[]` | `[]` | — |  |
+| `seam_enforcers` | `number[]` | `[]` | — |  |
 | `seam_position` | `string` | `'back'` | `seam_position` | nearest\|aligned\|back\|random |
 | `seam_slope_type` | `string` | `'none'` | `seam_slope_type` | none\|external\|all -> scarf seam (external/all = on) |
 | `z_hop` | `number` | `0.4` | `filament_z_hop`, `z_hop` | retraction_length/speed[0], z_hop[0] |
@@ -298,6 +300,7 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `travel_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode`, `travel_jerk` |  |
 | `use_firmware_retraction` | `boolean` | `false` | `use_firmware_retraction` | G10/G11 instead of E moves (upstream GCodeWriter::_retract) |
 | `use_relative_e_distances` | `boolean` | `true` | `use_relative_e_distances` | false = absolute E (M82, G92 E0 after each retraction), upstream's two modes |
+| `variable_layer_heights` | `number[]` | `[]` | — |  |
 | `wall_direction` | `string` | `'ccw'` | `wall_direction` | wall_direction (ccw \| cw) |
 | `wall_sequence` | `string` | `'inner wall/outer wall'` | `wall_sequence` | wall_sequence (inner wall/outer wall \| outer wall/inner wall \| inner-outer-inner wall) |
 | `z_offset` | `number` | `0.0` | `z_offset` | added to every Z the G-code writes (upstream GCodeWriter, z_offset) |
@@ -314,7 +317,7 @@ in the params object yourself. They are not one kind of thing, and the differenc
   the print. `economy` is the last rung of an out-of-memory retry: it streams G-code and skips the preview
   toolpaths and the time estimate, so a model that cannot finish any other way still finishes.
 - **Values the viewer computes** — `extruder_count`, `mm_group_split`, `mm_group_splits`, `mm_group_tools`,
-  `single_tool`, `auto_center`. These come from the scene (how many extruders are loaded, which triangle ranges belong
+  `single_tool`, `auto_center`, `seam_enforcers`, `seam_blockers`, `variable_layer_heights`. These come from the scene (how many extruders are loaded, which triangle ranges belong
   to which tool, the one filament a plate's objects all print with), so there is nothing for a settings map to hold. `<Viewport/>` fills them in at slice time.
 - **Kernel-only tuning** — `support_density`, `support_auto`, `support_grid_snap`, `support_overhang_min_area`,
   `tree_lite_shrink`, `tree_lite_min_radius`, `scarf_length`, `prime_tower_ring_size`,

package/engine/src/slicer.worker.js

@@ -349,6 +349,13 @@ const handleMessage = async (e) => {
     //  The caller (3mf save) rebases the facet indices back onto per-object numbering; this worker cannot, because
     //  which objects were merged in what order is the viewer's knowledge. A kernel built before the binding existed
     //  reports supported:false rather than throwing — the save then falls back to the paint it imported.
+    // Boolean, Cut and negative parts: two soups in, one soup out, or a typed refusal in `error`.
+    if (d.cmd === 'meshBoolean') {
+      if (!Module.mesh_boolean) { reply({ type: 'meshBoolean', error: 'MESH_BOOLEAN_UNAVAILABLE: this kernel has no mesh boolean' }); return }
+      const result = Module.mesh_boolean(d.first, d.second, d.operation)
+      reply({ type: 'meshBoolean', error: result.error, positions: result.positions })
+      return
+    }
     if (d.cmd === 'exportPaint') {
       let exported = null
       if (Module.selector_export_paint) exported = Module.selector_export_paint()