three-slicer 0.3.2 → 0.3.4

package/engine/PARAMS.md

@@ -8,7 +8,7 @@ cannot drift from what `slice()` actually honours. Regenerate with `node types/g
 
 <!-- KERNEL-PARAMS:BEGIN — generated by types/gen_kernel_params.mjs, do not edit by hand -->
 
-The kernel accepts **160 parameters**. `deriveKernelParams()` produces 131 of them from the
+The kernel accepts **238 parameters**. `deriveKernelParams()` produces 209 of them from the
 OrcaSlicer settings map; the remaining 29 have no schema key behind them and can only be set by writing
 the params object directly — those rows show `—` in the *From setting* column.
 
@@ -46,19 +46,24 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `bottom_shell_layers` | `number` | `3` | `bottom_shell_layers` | top_shell_layers/bottom_shell_layers |
 | `infill_angle` | `number` | `45.0` | `infill_direction` | infill_direction |
 | `infill_density` | `number` | `0.15` | `sparse_infill_density` |  |
+| `infill_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `infill_jerk`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `infill_wall_overlap` | `number` | `15.0` | `infill_wall_overlap` | infill_wall_overlap (percent) |
 | `ironing_flow` | `number` | `10.0` | `ironing_flow` | ironing flow (%) |
 | `ironing_spacing` | `number` | `0.1` | `ironing_spacing` | ironing line spacing (mm) |
 | `ironing_speed` | `number` | `30.0` | `ironing_speed` | ironing speed (mm/s) |
 | `ironing_type` | `string` | `'none'` | `ironing_type` | none\|top\|topmost\|solid (the top family = on) |
+| `sparse_infill_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `sparse_infill_acceleration`, `time_lapse_gcode` |  |
 | `sparse_infill_filament_id` | `number` | `0` | `sparse_infill_filament_id` |  |
+| `sparse_infill_flow_ratio` | `number` | `1.0` | `sparse_infill_flow_ratio` |  |
 | `sparse_infill_pattern` | `string` | `'rectilinear'` | `sparse_infill_pattern` | rectilinear\|grid\|triangles\|zigzag\|gyroid |
+| `sparse_infill_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `sparse_infill_speed`, `time_lapse_gcode` |  |
 | `top_shell_layers` | `number` | `4` | `top_shell_layers` | top_shell_layers/bottom_shell_layers |
 
 ### Speeds, flow and temperature
 
 | Kernel param | Type | Default | From setting | Notes |
 | --- | --- | --- | --- | --- |
-| `bed_temp` | `number` | `60` | `hot_plate_temp` |  |
+| `bed_temp` | `number` | `60` | `curr_bed_type`, `hot_plate_temp` |  |
 | `bridge_speed` | `number` | `25.0` | `bridge_speed` | bridge_speed[0] (slowdown for unsupported bottoms) |
 | `close_fan_the_first_x_layers` | `number` | `1` | `close_fan_the_first_x_layers` | close_fan_the_first_x_layers |
 | `enable_pressure_advance` | `boolean` | `false` | `enable_pressure_advance` | enable_pressure_advance[0] |
@@ -76,6 +81,10 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `machine_max_accel_e` | `number` | `5000` | `machine_max_acceleration_e` | mm/s² (machine_max_acceleration_*) — per-axis ceiling, distinct from the accel_* feedrates above |
 | `machine_max_accel_xy` | `number` | `5000` | `machine_max_acceleration_x` | mm/s² (machine_max_acceleration_*) — per-axis ceiling, distinct from the accel_* feedrates above |
 | `machine_max_accel_z` | `number` | `500` | `machine_max_acceleration_z` | mm/s² (machine_max_acceleration_*) — per-axis ceiling, distinct from the accel_* feedrates above |
+| `machine_max_acceleration_extruding` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_max_acceleration_extruding`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `machine_max_acceleration_travel` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_max_acceleration_travel`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `machine_max_acceleration_y` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_max_acceleration_y`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `machine_max_jerk_y` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_max_jerk_y`, `machine_start_gcode`, `time_lapse_gcode` |  |
 | `machine_max_speed_e` | `number` | `30` | `machine_max_speed_e` | mm/s |
 | `machine_max_speed_xy` | `number` | `500` | `machine_max_speed_x` | mm/s |
 | `machine_max_speed_z` | `number` | `12` | `machine_max_speed_z` | mm/s |
@@ -85,6 +94,7 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `pressure_advance` | `number` | `0.02` | `pressure_advance` | pressure_advance[0] |
 | `print_speed` | `number` | `60` | `outer_wall_speed` |  |
 | `slow_down_layer_time` | `number` | `8.0` | `slow_down_layer_time` | slow_down_layer_time (s) |
+| `slow_down_layers` | `number` | `0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `slow_down_layers`, `time_lapse_gcode` | layers over which the first layer's speed ramps up to the print's |
 | `travel_speed` | `number` | `150` | `travel_speed` |  |
 
 ### Retraction and seams
@@ -103,6 +113,7 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 
 | Kernel param | Type | Default | From setting | Notes |
 | --- | --- | --- | --- | --- |
+| `brim_flow_ratio` | `?` | — | `brim_flow_ratio` | undefined |
 | `brim_object_gap` | `number` | `0.0` | `brim_object_gap` | brim_object_gap (mm): gap between brim and object |
 | `brim_width` | `number` | `0.0` | `brim_width` | skirt_distance / brim_width |
 | `raft_contact_distance` | `number` | `0.1` | `raft_contact_distance` | raft_contact_distance (mm) |
@@ -112,6 +123,7 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `skirt_distance` | `number` | `2.0` | `skirt_distance` | skirt_distance / brim_width |
 | `skirt_height` | `number` | `1` | `skirt_height` | skirt_height: how many layers the skirt is drawn on |
 | `skirt_loops` | `number` | `1` | `skirt_loops` | skirt_loops |
+| `skirt_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `skirt_speed`, `time_lapse_gcode` | 0 = follow the role's speed |
 
 ### Support
 
@@ -127,16 +139,20 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `support_density` | `number` | `0.15` | — | density of the support body |
 | `support_expansion` | `number` | `0.0` | `support_expansion` | support_expansion (mm): expands the overhang region |
 | `support_filament` | `number` | `0` | `support_filament` | filament for the support base (and, upstream, the raft) |
+| `support_flow_ratio` | `?` | — | `support_flow_ratio` | undefined |
 | `support_grid_snap` | `boolean` | `true` | — | equivalent of the upstream SupportGridPattern (default behavior of the grid style) |
 | `support_interface_bottom_layers` | `number` | `0` | `support_interface_bottom_layers` | support_interface_bottom_layers (0 = none) |
 | `support_interface_filament` | `number` | `0` | `support_interface_filament` | filament for the support interface |
+| `support_interface_flow_ratio` | `?` | — | `support_interface_flow_ratio` | undefined |
 | `support_interface_pattern` | `string` | `'auto'` | `support_interface_pattern` | support_interface_pattern: auto\|rectilinear\|concentric\|rectilinear_interlaced\|grid |
 | `support_interface_spacing` | `number` | `0.5` | `support_interface_spacing` | support_interface_spacing (mm, 0=solid). Upstream default 0.5 |
+| `support_interface_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `support_interface_speed`, `time_lapse_gcode` |  |
 | `support_interface_top_layers` | `number` | `2` | `support_interface_top_layers` | support_interface_top_layers |
 | `support_object_first_layer_gap` | `number` | `0.2` | `support_object_first_layer_gap` | support_object_first_layer_gap (mm) |
 | `support_on_build_plate_only` | `boolean` | `false` | `support_on_build_plate_only` | support_on_build_plate_only: only support reaching the bed |
 | `support_overhang_min_area` | `number` | `0.0` | — | minimum overhang area (mm², 0 = auto w²). Replaces the morphological opening filter |
 | `support_remove_small_overhang` | `boolean` | `true` | `support_remove_small_overhang` | support_remove_small_overhang (upstream default true) |
+| `support_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `support_speed`, `time_lapse_gcode` |  |
 | `support_style` | `string` | `'grid'` | `support_style`, `support_type` | grid\|tree_lite |
 | `support_threshold_angle` | `number` | `30.0` | `support_threshold_angle` | support_threshold_angle |
 | `support_threshold_overlap` | `number` | `0.5` | `support_threshold_overlap` | support_threshold_overlap: the overlap criterion when θ=0 (as a fraction of extrusion width) |
@@ -144,7 +160,7 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 | `support_xy_distance` | `number` | `0.35` | `support_object_xy_distance` | support_object_xy_distance |
 | `tree_lite_min_radius` | `number` | `1.5` | — | tree_lite taper constants (our own approximation — no matching upstream key) |
 | `tree_lite_shrink` | `number` | `0.5` | — | tree_lite taper constants (our own approximation — no matching upstream key) |
-| `tree_style` | `string` | `'organic'` | — | organic\|slim\|strong\|hybrid (upstream support_style smsTree*) |
+| `tree_style` | `string` | `'organic'` | `support_style` | organic\|slim\|strong\|hybrid (upstream support_style smsTree*) |
 | `tree_support_angle_slow` | `number` | `25.0` | `tree_support_angle_slow` | tree_support_angle_slow (deg) |
 | `tree_support_branch_angle` | `number` | `40.0` | `tree_support_branch_angle` | fallback spelling — `tree_support_branch_angle_organic` wins when both are sent |
 | `tree_support_branch_angle_organic` | `number` | `40.0` | `tree_support_branch_angle_organic` | tree_support_branch_angle_organic (deg) |
@@ -178,9 +194,11 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 
 | Kernel param | Type | Default | From setting | Notes |
 | --- | --- | --- | --- | --- |
-| `bed_depth` | `number` | `256.0` | `printable_area` | bed size (offset = bed/2) |
+| `bed_depth` | `number` | `256.0` | `printable_area` | bed size |
 | `bed_height` | `number` | `0.0` | `printable_height` | printable_height (mm). 0 = no ceiling (backwards compatible) |
-| `bed_width` | `number` | `256.0` | `printable_area` | bed size (offset = bed/2) |
+| `bed_origin_x` | `number` | `0.0` | `printable_area` |  |
+| `bed_origin_y` | `number` | `0.0` | `printable_area` |  |
+| `bed_width` | `number` | `256.0` | `printable_area` | bed size |
 | `enable_arc_fitting` | `boolean` | `false` | `enable_arc_fitting` | enable_arc_fitting |
 | `machine_end_gcode` | `string` | — | `machine_end_gcode` | printer profile custom G-code. Empty = the mini-kernel's own preamble/footer only |
 | `machine_start_gcode` | `string` | — | `machine_start_gcode` | printer profile custom G-code. Empty = the mini-kernel's own preamble/footer only |
@@ -190,39 +208,99 @@ same unit — `first_layer_height` comes from `initial_layer_print_height`, and
 
 | Kernel param | Type | Default | From setting | Notes |
 | --- | --- | --- | --- | --- |
+| `accel_to_decel_enable` | `boolean` | `false` | `accel_to_decel_enable`, `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `accel_to_decel_factor` | `number` | `50.0` | `accel_to_decel_factor`, `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` | percent |
+| `alternate_extra_wall` | `boolean` | `false` | `alternate_extra_wall` | alternate_extra_wall |
 | `arachne_dump` | `boolean` | `false` | — | temporary diagnostic: dump the PASS1 arachne input polygons to stderr |
+| `bottom_solid_infill_flow_ratio` | `number` | `1.0` | `bottom_solid_infill_flow_ratio` |  |
+| `bridge_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `bridge_acceleration`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `bridge_flow` | `number` | `1.0` | `bridge_flow` |  |
+| `default_acceleration` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `default_acceleration`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `default_jerk` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `default_jerk`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `detect_thin_wall` | `boolean` | `false` | `detect_thin_wall` | detect_thin_wall: medial-axis thin walls where one loop does not fit |
+| `disable_m73` | `boolean` | `true` | `before_layer_change_gcode`, `change_filament_gcode`, `disable_m73`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
 | `economy` | `boolean` | `false` | — |  |
 | `emit_pe_tags` | `boolean` | `false` | — | emit PE tags on extrusion runs (enabled automatically when the real PE is used). Default false (backwards compatible) |
 | `extruder_count` | `number` | `1` | — | multi-material: how many extruders are used (1\|2) |
 | `extruder_filament_diameter` | `number[]` | `[]` | `filament_diameter` |  |
+| `extruder_first_layer_temp` | `number[]` | `[]` | `nozzle_temperature_initial_layer` | nozzle_temperature_initial_layer per extruder (the first layer's own) |
 | `extruder_flow_ratio` | `number[]` | `[]` | `filament_flow_ratio` |  |
 | `extruder_nozzle_temp` | `number[]` | `[]` | `nozzle_temperature` |  |
 | `extruder_retract_length` | `?` | `[]` | `filament_retraction_length` | undefined |
 | `extruder_retract_speed` | `?` | `[]` | `filament_retraction_speed` | undefined |
 | `extruder_z_hop` | `?` | `[]` | `filament_z_hop` | undefined |
 | `extrusion_rate_slope_segment_length` | `number` | `1.0` | — | segment split length for the real PE (mm) |
+| `filament_max_volumetric_speed` | `number[]` | `[]` | `filament_max_volumetric_speed` | mm³/s, per filament; empty = no cap (GW::capped_feed) |
+| `filter_out_gap_fill` | `number` | `0.0` | `filter_out_gap_fill` | filter_out_gap_fill (mm): gap fill shorter than this is dropped |
+| `first_layer_bed_temp` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `hot_plate_temp_initial_layer`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` | the plate type's _initial_layer bed option (<0 = none sent) |
+| `first_layer_flow_ratio` | `?` | — | `first_layer_flow_ratio` | undefined |
+| `first_layer_nozzle_temp` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `nozzle_temperature_initial_layer`, `time_lapse_gcode` | nozzle_temperature_initial_layer (<0 = none sent) |
 | `flush_into_infill` | `boolean` | `false` | `flush_into_infill` |  |
 | `flush_multiplier` | `number` | `1.0` | `flush_multiplier` | upstream scales the whole table by this |
 | `flush_volumes_matrix` | `number[]` | `[]` | `flush_volumes_matrix` |  |
+| `gap_fill_flow_ratio` | `?` | — | `gap_fill_flow_ratio` | undefined |
+| `gap_infill_speed` | `number[]` | `[]` | `gap_infill_speed` | gap_infill_speed (mm/s, per extruder): a first entry of 0 turns gap fill off (upstream has_gap_fill); empty = the schema's 30 |
 | `gcode_config_block` | `boolean` | `false` | — | ; CONFIG_BLOCK_START … the parameters this slice ran with … END |
+| `gcode_flavor` | `string` | — | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `gcode_flavor`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
 | `gcode_role_tags` | `boolean` | `false` | — | ;TYPE:<role> on every role change (upstream GCodeProcessor tag) |
 | `gcode_stats_block` | `boolean` | `false` | — | ; filament used [mm]/[cm3]/[g], cost, total filament change |
 | `independent_support_layer_height` | `boolean` | `false` | `independent_support_layer_height` | false by default because of the kernel z grid constraint (gap quantized to layers) |
+| `initial_layer_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `initial_layer_acceleration`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `initial_layer_infill_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `initial_layer_infill_speed`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `initial_layer_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `initial_layer_jerk`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `initial_layer_travel_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `initial_layer_travel_acceleration`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `initial_layer_travel_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `initial_layer_travel_jerk`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `initial_layer_travel_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `initial_layer_travel_speed`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` | the first layer's travel speed |
+| `inner_wall_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `inner_wall_acceleration`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `inner_wall_flow_ratio` | `number` | `1.0` | `inner_wall_flow_ratio` |  |
+| `inner_wall_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `inner_wall_jerk`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `inner_wall_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `inner_wall_speed`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `internal_solid_infill_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `internal_solid_infill_acceleration`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `internal_solid_infill_flow_ratio` | `?` | — | `internal_solid_infill_flow_ratio` | undefined |
+| `internal_solid_infill_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `internal_solid_infill_speed`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
 | `keep_stages` | `boolean` | `false` | — | keep the stages cached after slicing (skips the early release — a memory trade-off) |
+| `machine_envelope` | `number[]` | `[]` | `before_layer_change_gcode`, `change_filament_gcode`, `emit_machine_limits_to_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
 | `mm_group_split` | `number` | `0` | — | triangle group boundary index ([0,split)=T0, [split,N)=T1) |
 | `mm_group_splits` | `number[]` | `[]` | — |  |
 | `mm_group_tools` | `number[]` | `[]` | — |  |
+| `only_one_wall_first_layer` | `boolean` | `false` | `only_one_wall_first_layer` | only_one_wall_first_layer |
+| `outer_wall_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `outer_wall_acceleration`, `time_lapse_gcode` |  |
+| `outer_wall_flow_ratio` | `number` | `1.0` | `outer_wall_flow_ratio` |  |
+| `outer_wall_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `outer_wall_jerk`, `time_lapse_gcode` |  |
 | `pe_external_perimeter_only` | `boolean` | `false` | — | real PE: smooth outer walls only |
 | `pe_lite` | `boolean` | `true` | — | true = the effective PE-lite (default), false = the ported real PE (tagged g-code) |
 | `pe_strip_tags` | `boolean` | `true` | — | strip the tags from the final output after real PE post-processing |
+| `placeholder_config` | `string` | — | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode` |  |
+| `precise_outer_wall` | `boolean` | `true` | `precise_outer_wall` | precise_outer_wall |
 | `prime_tower_ring_size` | `number` | `15.0` | — | side length of the fallback square ring (mm) |
 | `prime_tower_width` | `number` | `30.0` | `prime_tower_width` | width of the real WipeTower (mm). Separate from the square ring width (15). |
 | `prime_tower_x` | `number` | `10.0` | `wipe_tower_x` |  |
 | `prime_tower_y` | `number` | `10.0` | `wipe_tower_y` |  |
 | `prime_volume` | `number` | `0.0` | `prime_volume` | extra volume primed on every change, on top of the pair's |
+| `print_flow_ratio` | `number` | `1.0` | `print_flow_ratio` |  |
 | `reduce_crossing_wall` | `boolean` | `false` | `reduce_crossing_wall` | wall-avoiding travel |
+| `reduce_infill_retraction` | `boolean` | `false` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `reduce_infill_retraction`, `time_lapse_gcode` | no retraction for a travel inside the infill (GCode::needs_retraction); off = the kernel's own rule |
 | `reuse_stages` | `number` | `0` | — |  |
+| `scarf_joint_flow_ratio` | `?` | — | `scarf_joint_flow_ratio` | undefined |
+| `set_other_flow_ratios` | `boolean` | `false` | `set_other_flow_ratios` |  |
+| `single_extruder_multi_material` | `boolean` | `true` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `single_extruder_multi_material`, `time_lapse_gcode` | one nozzle carries every filament: the switch names no tool |
+| `single_tool` | `number` | `0` | — |  |
+| `small_perimeter_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `small_perimeter_speed`, `time_lapse_gcode` | mm/s for a wall loop within small_perimeter_threshold; 0 = half the outer wall's |
+| `small_perimeter_threshold` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `small_perimeter_threshold`, `time_lapse_gcode` | a RADIUS (mm): loops up to 2*pi*threshold long are small (0 = off) |
+| `thick_bridges` | `boolean` | `false` | `thick_bridges` |  |
 | `time_engine` | `string` | `'full'` | — |  |
+| `top_bottom_infill_wall_overlap` | `number` | `25.0` | `top_bottom_infill_wall_overlap` | top_bottom_infill_wall_overlap (percent, first and topmost layer) |
+| `top_solid_infill_flow_ratio` | `number` | `1.0` | `top_solid_infill_flow_ratio` |  |
+| `top_surface_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode`, `top_surface_acceleration` |  |
+| `top_surface_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode`, `top_surface_jerk` |  |
+| `top_surface_speed` | `number` | `-1.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode`, `top_surface_speed` |  |
+| `travel_acceleration` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode`, `travel_acceleration` |  |
+| `travel_jerk` | `number` | `0.0` | `before_layer_change_gcode`, `change_filament_gcode`, `filament_end_gcode`, `filament_start_gcode`, `file_start_gcode`, `layer_change_gcode`, `machine_end_gcode`, `machine_start_gcode`, `time_lapse_gcode`, `travel_jerk` |  |
+| `use_firmware_retraction` | `boolean` | `false` | `use_firmware_retraction` | G10/G11 instead of E moves (upstream GCodeWriter::_retract) |
+| `use_relative_e_distances` | `boolean` | `true` | `use_relative_e_distances` | false = absolute E (M82, G92 E0 after each retraction), upstream's two modes |
+| `wall_direction` | `string` | `'ccw'` | `wall_direction` | wall_direction (ccw \| cw) |
+| `wall_sequence` | `string` | `'inner wall/outer wall'` | `wall_sequence` | wall_sequence (inner wall/outer wall \| outer wall/inner wall \| inner-outer-inner wall) |
+| `z_offset` | `number` | `0.0` | `z_offset` | added to every Z the G-code writes (upstream GCodeWriter, z_offset) |
 
 <!-- KERNEL-PARAMS:END -->
 
@@ -236,10 +314,10 @@ in the params object yourself. They are not one kind of thing, and the differenc
   the print. `economy` is the last rung of an out-of-memory retry: it streams G-code and skips the preview
   toolpaths and the time estimate, so a model that cannot finish any other way still finishes.
 - **Values the viewer computes** — `extruder_count`, `mm_group_split`, `mm_group_splits`, `mm_group_tools`,
-  `auto_center`. These come from the scene (how many extruders are loaded, which triangle ranges belong to which
-  tool), so there is nothing for a settings map to hold. `<Viewport/>` fills them in at slice time.
+  `single_tool`, `auto_center`. These come from the scene (how many extruders are loaded, which triangle ranges belong
+  to which tool, the one filament a plate's objects all print with), so there is nothing for a settings map to hold. `<Viewport/>` fills them in at slice time.
 - **Kernel-only tuning** — `support_density`, `support_auto`, `support_grid_snap`, `support_overhang_min_area`,
-  `tree_style`, `tree_lite_shrink`, `tree_lite_min_radius`, `scarf_length`, `prime_tower_ring_size`,
+  `tree_lite_shrink`, `tree_lite_min_radius`, `scarf_length`, `prime_tower_ring_size`,
   `raft_first_layer_height`, `extrusion_rate_slope_segment_length`. Real knobs with no upstream option of the same
   name — some are this kernel's own approximations (the `tree_lite_*` taper), others are upstream behaviour that
   upstream never exposed as a setting.

package/engine/src/contour_front_gpu.js

@@ -0,0 +1,291 @@
+// The front of PASS1 on the GPU: the seated triangles and the layer planes in (the kernel's MESH phase,
+//  wasm-core/contour_phase.h), contour_gpu.js's union input out, in GPU buffers, so the contours never leave the GPU
+//  between the cut and the union.
+//
+// What runs here (WGSL: contour_front_shaders.js), every layer at once:
+//   cut      per triangle, the layers it spans (exact z compares), each crossing in double-float, oriented as tri_plane
+//   cancel   segments coinciding exactly in opposite directions removed in pairs (cancel_coincident), by a hash on place
+//   chain    each end continues into the smallest unused segment starting at its 1e-3 mm key (chain_polys' greedy rule)
+//   loops    pointer jumping for each loop's head and each segment's rank; tails that lead into a cycle stay out
+//   layout   loops sorted by (layer, head), laid out as chain_polys' n + 1 points, write_polygon's duplicates dropped
+//   tables   layer origins and grids, polygon ranges, the cell-list size
+//
+// Measured (design report gpu-full-port-trial-2026-10-01.md section 3): 3.0M triangles, 420 layers in 30 ms (the kernel's
+//  own capture: 410 ms st, 71 ms mt); 0.24 % of the edges differ from the kernel's by its double rounding a shared
+//  mesh-edge crossing to 1e-6 mm two ways, which the 48-bit double-float does not reproduce.
+//
+// A layer with a chain that does not close is marked (openLayers): the kernel cuts, chains and unions that layer itself
+//  from the mesh it handed over (contour_phase::assemble), so the slice never depends on the GPU closing every loop.
+import {
+  CUT_SHADER, CANCEL_SHADER, CHAIN_SHADER, JUMP_SHADER, CYCLES_SHADER, LOOPS_SHADER, OUTPUT_SHADER, WRITE_SHADER,
+  TABLES_SHADER, ENTRIES_SHADER, OPEN_LAYERS_SHADER,
+} from './contour_front_shaders.js'
+import { SCAN_SHADER } from './contour_gpu_shaders.js'
+
+// Numeric WebGPU constants: the named globals exist in a browser worker but not on a bare node globalThis.
+const BUFFER = { MAP_READ: 0x1, COPY_SRC: 0x4, COPY_DST: 0x8, UNIFORM: 0x40, STORAGE: 0x80 }
+const SHADER_STAGE_COMPUTE = 0x4
+const MAP_MODE_READ = 0x1
+const WORKGROUP_SIZE = 256
+const MAX_WORKGROUPS_PER_DIMENSION = 65535
+const CELL_SIZE = 2_000_000   // the union's grid cell in kernel units; contour_gpu.js and contour_phase.cpp use the same
+const INT32_MAX = 0x7fffffff
+const INT32_MIN = -0x80000000
+
+const smallestPowerOfTwo = (count) => 2 ** Math.ceil(Math.log2(Math.max(2, count)))
+
+/**
+ * @param {GPUDevice} device the device contour_gpu.js runs on (its buffers feed the union directly)
+ * @returns {Promise<{ cut(triangles: Float32Array, planes: Float64Array): Promise<object>, dispose(): void }>}
+ */
+export async function makeContourFront(device) {
+  const BINDING_TYPE = { u: 'uniform', r: 'read-only-storage', w: 'storage' }
+  const layouts = new Map(), modules = new Map(), pipelines = new Map(), buffers = new Map()
+  let encoder = null, transient = []
+
+  const layoutOf = (kinds) => {
+    if (!layouts.has(kinds)) layouts.set(kinds, device.createBindGroupLayout({ entries: [...kinds].map((kind, binding) => (
+      { binding, visibility: SHADER_STAGE_COMPUTE, buffer: { type: BINDING_TYPE[kind] } })) }))
+    return layouts.get(kinds)
+  }
+  const pipelineOf = (code, entryPoint, kinds) => {
+    const key = `${entryPoint}\u0000${kinds}\u0000${code}`
+    if (!pipelines.has(key)) {
+      if (!modules.has(code)) modules.set(code, device.createShaderModule({ code }))
+      pipelines.set(key, device.createComputePipeline({ layout: device.createPipelineLayout({ bindGroupLayouts: [layoutOf(kinds)] }),
+        compute: { module: modules.get(code), entryPoint } }))
+    }
+    return pipelines.get(key)
+  }
+  // compile every shader up front, so a WGSL error surfaces as a refusal instead of an empty result
+  for (const code of [CUT_SHADER, CANCEL_SHADER, CHAIN_SHADER, JUMP_SHADER, CYCLES_SHADER, LOOPS_SHADER, OUTPUT_SHADER, WRITE_SHADER, TABLES_SHADER, ENTRIES_SHADER, OPEN_LAYERS_SHADER, SCAN_SHADER]) {
+    const module = device.createShaderModule({ code })
+    modules.set(code, module)
+    const failure = (await module.getCompilationInfo()).messages.find(message => message.type === 'error')
+    if (failure) throw new Error(`contour front shader: line ${failure.lineNum}: ${failure.message}`)
+  }
+
+  // a storage buffer kept across slices by name; a regrown one is destroyed after the submit that last used it
+  const buffer = (name, bytes) => {
+    const size = Math.max(16, Math.ceil(bytes / 16) * 16)
+    const kept = buffers.get(name)
+    if (kept && kept.size >= size) return kept
+    if (kept) transient.push(kept)
+    const made = device.createBuffer({ size, usage: BUFFER.STORAGE | BUFFER.COPY_SRC | BUFFER.COPY_DST })
+    buffers.set(name, made)
+    return made
+  }
+  const encoderOf = () => { if (!encoder) encoder = device.createCommandEncoder(); return encoder }
+  const uniform = (values) => {
+    const made = device.createBuffer({ size: Math.max(16, values.length * 4), usage: BUFFER.UNIFORM | BUFFER.COPY_DST })
+    device.queue.writeBuffer(made, 0, new Uint32Array(values))
+    transient.push(made)
+    return made
+  }
+  const zero = device.createBuffer({ size: 16, usage: BUFFER.UNIFORM | BUFFER.COPY_DST })   // the double-float's `dfZero`
+  device.queue.writeBuffer(zero, 0, new Uint32Array(4))
+  const run = (code, entryPoint, kinds, bound, invocations) => {
+    if (invocations <= 0) return
+    let groupsX = Math.ceil(invocations / WORKGROUP_SIZE), groupsY = 1
+    if (groupsX > MAX_WORKGROUPS_PER_DIMENSION) { groupsY = Math.ceil(groupsX / MAX_WORKGROUPS_PER_DIMENSION); groupsX = MAX_WORKGROUPS_PER_DIMENSION }
+    const group = device.createBindGroup({ layout: layoutOf(kinds), entries: bound.map((target, binding) => ({ binding, resource: { buffer: target } })) })
+    const pass = encoderOf().beginComputePass()
+    pass.setPipeline(pipelineOf(code, entryPoint, kinds)); pass.setBindGroup(0, group); pass.dispatchWorkgroups(groupsX, groupsY); pass.end()
+  }
+  const clear = (target, bytes) => encoderOf().clearBuffer(target, 0, Math.ceil(bytes / 4) * 4)
+  const copy = (source, sourceOffset, target, targetOffset, bytes) => encoderOf().copyBufferToBuffer(source, sourceOffset, target, targetOffset, bytes)
+  const submit = async () => {
+    if (encoder) { device.queue.submit([encoder.finish()]); encoder = null }
+    await device.queue.onSubmittedWorkDone()
+    for (const item of transient) item.destroy()
+    transient = []
+  }
+  // `wordCount` 32-bit words from `offsetWords` on, copied out of the staging buffer
+  const readWords = async (source, wordCount, offsetWords = 0, Type = Uint32Array) => {
+    const bytes = Math.max(4, wordCount * 4)
+    const staging = device.createBuffer({ size: Math.ceil(bytes / 16) * 16, usage: BUFFER.MAP_READ | BUFFER.COPY_DST })
+    encoderOf().copyBufferToBuffer(source, offsetWords * 4, staging, 0, Math.ceil(bytes / 4) * 4)
+    await submit()
+    await staging.mapAsync(MAP_MODE_READ)
+    const words = new Type(staging.getMappedRange(0, wordCount * 4).slice(0))
+    staging.unmap(); staging.destroy()
+    return words
+  }
+  // in-place exclusive scan of `count` u32 (contour_gpu_shaders.js' scan)
+  const scan = (data, count, depth = 0) => {
+    const blocks = Math.ceil(count / WORKGROUP_SIZE)
+    const sums = buffer(`scan.${depth}`, (blocks + 1) * 4)
+    const parameters = uniform([count, 0, 0, 0])
+    run(SCAN_SHADER, 'scanBlock', 'uww', [parameters, data, sums], count)
+    if (blocks === 1) return
+    scan(sums, blocks, depth + 1)
+    run(SCAN_SHADER, 'addOff', 'uww', [parameters, data, sums], count)
+  }
+
+  // layers, triangles -> segments (with their chain keys), cancelled pairs, successors
+  async function segmentsOf(triangles, planes) {
+    const triangleCount = triangles.length / 9, layerCount = planes.length
+    const planePairs = new Float32Array(layerCount * 2)   // each plane's z as hi + lo, for exact compares with f32 vertices
+    for (let layer = 0; layer < layerCount; layer++) {
+      const high = Math.fround(planes[layer])
+      planePairs[layer * 2] = high; planePairs[layer * 2 + 1] = Math.fround(planes[layer] - high)
+    }
+    const triangleBuffer = buffer('triangles', triangles.byteLength), planeBuffer = buffer('planes', planePairs.byteLength)
+    device.queue.writeBuffer(triangleBuffer, 0, triangles); device.queue.writeBuffer(planeBuffer, 0, planePairs)
+    const counts = buffer('counts', (triangleCount + 1) * 4)
+    clear(counts, (triangleCount + 1) * 4)
+    const unused = [1, 2, 3].map(index => buffer(`unused${index}`, 16))
+    run(CUT_SHADER, 'main', 'urrwwwwu', [uniform([triangleCount, layerCount, 0, 0]), triangleBuffer, planeBuffer, counts, ...unused, zero], triangleCount)
+    scan(counts, triangleCount + 1)
+    const [segmentCount] = await readWords(counts, 1, triangleCount)   // the segment count sizes everything after
+    const segmentPoints = buffer('segmentPoints', segmentCount * 16), segmentKeys = buffer('segmentKeys', segmentCount * 16)
+    const segmentLayer = buffer('segmentLayer', segmentCount * 4)
+    run(CUT_SHADER, 'main', 'urrwwwwu', [uniform([triangleCount, layerCount, 1, 0]), triangleBuffer, planeBuffer, counts, segmentPoints, segmentKeys, segmentLayer, zero], triangleCount)
+
+    const tableSize = smallestPowerOfTwo(segmentCount * 2), mask = tableSize - 1
+    const dead = buffer('dead', segmentCount * 4)
+    const owner = buffer('owner', tableSize * 4), headA = buffer('headA', tableSize * 4), headB = buffer('headB', tableSize * 4)
+    const nextA = buffer('nextA', segmentCount * 4), nextB = buffer('nextB', segmentCount * 4)
+    clear(dead, segmentCount * 4); clear(owner, tableSize * 4); clear(headA, tableSize * 4); clear(headB, tableSize * 4)
+    const cancelBound = [uniform([segmentCount, mask, 0, 0]), segmentPoints, segmentLayer, owner, headA, headB, nextA, dead]
+    run(CANCEL_SHADER, 'insert', 'urrwwwww', cancelBound, segmentCount)
+    run(CANCEL_SHADER, 'pair', 'urrwwwww', cancelBound, tableSize)
+    clear(owner, tableSize * 4); clear(headA, tableSize * 4); clear(headB, tableSize * 4)
+    const successor = buffer('successor', (segmentCount + 2) * 4)
+    clear(successor, (segmentCount + 2) * 4)
+    const chainBound = [uniform([segmentCount, mask, 0, 0]), segmentKeys, segmentLayer, dead, owner, headA, headB, nextA, nextB, successor]
+    run(CHAIN_SHADER, 'insertStarts', 'urrrwwwwww', chainBound, segmentCount)
+    run(CHAIN_SHADER, 'insertEnds', 'urrrwwwwww', chainBound, segmentCount)
+    run(CHAIN_SHADER, 'pairEnds', 'urrrwwwwww', chainBound, tableSize)
+    return { layerCount, segmentCount, segmentPoints, segmentLayer, successor, dead }
+  }
+
+  // segments with successors -> the union's input (contour_gpu.js' layout), still on the GPU
+  async function loopsOf(segments) {
+    const { layerCount, segmentCount, segmentPoints, segmentLayer, successor, dead } = segments
+    // labels (each segment's loop head), then ranks (its distance to the loop's last segment); ping-pong buffers
+    const rounds = Math.ceil(Math.log2(Math.max(2, segmentCount))) + 1
+    const valueA = buffer('valueA', segmentCount * 4), nextOfA = buffer('nextOfA', segmentCount * 4)
+    const valueB = buffer('valueB', segmentCount * 4), nextOfB = buffer('nextOfB', segmentCount * 4)
+    const label = buffer('label', segmentCount * 4), rank = buffer('rank', segmentCount * 4), reach = buffer('reach', segmentCount * 4)
+    const jump = (mode, input, output) => run(JUMP_SHADER, 'main', 'urrwwwwrr',
+      [uniform([segmentCount, mode, 0, 0]), successor, dead, input[0], input[1], output[0], output[1], label, reach], segmentCount)
+    const jumpRounds = (mode, finalValue, finalNext) => {
+      let from = [valueA, nextOfA], to = [valueB, nextOfB]
+      for (let round = 0; round < rounds; round++) { jump(mode, from, to); [from, to] = [to, from] }
+      copy(from[0], 0, finalValue, 0, segmentCount * 4)
+      if (finalNext) copy(from[1], 0, finalNext, 0, segmentCount * 4)
+    }
+    jump(0, [valueB, nextOfB], [valueA, nextOfA]); jumpRounds(1, label, reach)
+    const hit = buffer('hit', segmentCount * 4)
+    clear(hit, segmentCount * 4)
+    run(CYCLES_SHADER, 'main', 'uww', [uniform([segmentCount, 0, 0, 0]), reach, hit], segmentCount)
+    run(CYCLES_SHADER, 'main', 'uww', [uniform([segmentCount, 1, 0, 0]), reach, hit], segmentCount)
+    const openLayer = buffer('openLayer', layerCount * 4)
+    clear(openLayer, layerCount * 4)
+    run(OPEN_LAYERS_SHADER, 'main', 'urrrw', [uniform([segmentCount, 0, 0, 0]), dead, reach, segmentLayer, openLayer], segmentCount)
+    jump(2, [valueB, nextOfB], [valueA, nextOfA]); jumpRounds(3, rank)
+
+    // heads, sorted by (layer, head) with a bitonic sort
+    const headFlag = buffer('headFlag', (segmentCount + 1) * 4)
+    clear(headFlag, (segmentCount + 1) * 4)
+    const loopBound = (parameters, heads, polygonOf, loopStart, order) => [parameters, successor, label, rank, segmentLayer, headFlag, heads, polygonOf, loopStart, order, reach]
+    const unused = [4, 5, 6, 7].map(index => buffer(`unused${index}`, 16))
+    run(LOOPS_SHADER, 'flagHeads', 'urrrrwwwwwr', loopBound(uniform([segmentCount, 0, layerCount, 0]), ...unused), segmentCount)
+    scan(headFlag, segmentCount + 1)
+    const [headCount] = await readWords(headFlag, 1, segmentCount)    // the loop count sizes the sort
+    const padded = smallestPowerOfTwo(headCount)
+    const heads = buffer('heads', padded * 8), polygonOf = buffer('polygonOf', segmentCount * 4)
+    const loopStart = buffer('loopStart', (headCount + 1) * 4), order = buffer('order', (segmentCount + headCount) * 4)
+    const bound = (parameters) => loopBound(parameters, heads, polygonOf, loopStart, order)
+    run(LOOPS_SHADER, 'gatherHeads', 'urrrrwwwwwr', bound(uniform([segmentCount, padded, layerCount, 0])), segmentCount)
+    run(LOOPS_SHADER, 'padHeads', 'urrrrwwwwwr', bound(uniform([segmentCount, padded, layerCount, headCount])), padded - headCount)
+    for (let block = 2; block <= padded; block *= 2) for (let distance = block / 2; distance >= 1; distance /= 2)
+      run(LOOPS_SHADER, 'bitonic', 'urrrrwwwwwr', bound(uniform([segmentCount, padded, distance, block])), padded)
+    clear(loopStart, (headCount + 1) * 4)
+    run(LOOPS_SHADER, 'lengths', 'urrrrwwwwwr', bound(uniform([segmentCount, padded, layerCount, headCount])), headCount)
+    scan(loopStart, headCount + 1)
+    const [slotCount] = await readWords(loopStart, 1, headCount)      // points of the closed loops, chain_polys' n + 1 each
+    run(LOOPS_SHADER, 'place', 'urrrrwwwwwr', bound(uniform([segmentCount, padded, layerCount, headCount])), segmentCount)
+
+    // the points write_polygon keeps, the polygons chain_polys keeps, the layer boxes
+    const kept = buffer('kept', (slotCount + 1) * 4), polygonKept = buffer('polygonKept', (headCount + 1) * 4)
+    const layerBox = buffer('layerBox', layerCount * 32), slotPolygon = buffer('slotPolygon', slotCount * 4)
+    const boxStart = new Int32Array(layerCount * 8)
+    for (let layer = 0; layer < layerCount; layer++) boxStart.set([INT32_MAX, INT32_MAX, INT32_MIN, INT32_MIN], layer * 8)
+    device.queue.writeBuffer(layerBox, 0, boxStart)
+    clear(kept, (slotCount + 1) * 4)
+    const outputBound = [uniform([slotCount, headCount, layerCount, 0]), order, segmentPoints, segmentLayer, successor, loopStart, kept, polygonKept, layerBox, slotPolygon]
+    run(OUTPUT_SHADER, 'slotPolygons', 'urrrrrwwww', outputBound, headCount)
+    run(OUTPUT_SHADER, 'keep', 'urrrrrwwww', outputBound, slotCount)
+    run(OUTPUT_SHADER, 'polygonCounts', 'urrrrrwwww', outputBound, headCount)
+    run(OUTPUT_SHADER, 'keepValid', 'urrrrrwwww', outputBound, slotCount)
+    const polygonValidAt = buffer('polygonValidAt', (headCount + 1) * 4)
+    clear(polygonValidAt, (headCount + 1) * 4)
+    copy(polygonKept, 0, polygonValidAt, 0, headCount * 4)
+    scan(polygonValidAt, headCount + 1)
+    const keptAt = buffer('keptAt', (slotCount + 1) * 4)
+    clear(keptAt, (slotCount + 1) * 4)
+    copy(kept, 0, keptAt, 0, slotCount * 4)
+    scan(keptAt, slotCount + 1)
+    const [pointCount] = await readWords(keptAt, 1, slotCount)
+    const [polygonCount] = await readWords(polygonValidAt, 1, headCount)
+    const points = buffer('points', pointCount * 8), layerStart = buffer('layerStart', (layerCount + 1) * 4)
+    clear(layerStart, (layerCount + 1) * 4)
+    run(WRITE_SHADER, 'main', 'urrrrrrww', [uniform([slotCount, headCount, layerCount, 0]), order, segmentPoints, segmentLayer, kept, keptAt, layerBox, points, layerStart], slotCount)
+    scan(layerStart, layerCount + 1)
+    const layerInfo = buffer('layerInfo', (layerCount + 1) * 16), polygonInfo = buffer('polygonInfo', polygonCount * 20 + 16)
+    const tableBound = [uniform([slotCount, headCount, layerCount, CELL_SIZE]), layerBox, layerStart, layerInfo, polygonValidAt, loopStart, keptAt, order, segmentLayer, polygonInfo]
+    run(TABLES_SHADER, 'cells', 'urwwrrrrrw', tableBound, 1)
+    run(TABLES_SHADER, 'polygons', 'urwwrrrrrw', tableBound, headCount)
+    const entries = buffer('entries', 16)
+    clear(entries, 16)
+    run(ENTRIES_SHADER, 'main', 'urrw', [uniform([polygonCount, CELL_SIZE, 0, 0]), polygonInfo, points, entries], polygonCount)
+    const [cellCount] = await readWords(layerInfo, 1, layerCount * 4)
+    const [cellEntryCount] = await readWords(entries, 1)
+    const boxes = await readWords(layerBox, layerCount * 8, 0, Int32Array)
+    const openLayers = await readWords(openLayer, layerCount)
+    // the origin the kernel adds back to every piece; a layer with no loop has none, and the kernel's own is 0 there
+    const origins = new Int32Array(layerCount * 2)
+    for (let layer = 0; layer < layerCount; layer++) {
+      if (boxes[layer * 8 + 2] < boxes[layer * 8]) continue
+      origins[layer * 2] = boxes[layer * 8]; origins[layer * 2 + 1] = boxes[layer * 8 + 1]
+    }
+    return { layerCount, segmentCount: pointCount, polygonCount, cellCount, cellEntryCount, headCount, slotCount, origins, openLayers,
+      points, layerInfo, polygonInfo }
+  }
+
+  /**
+   * The union input of every layer of a mesh.
+   * @param {Float32Array} triangles 9 floats per triangle, seated (the kernel's contour_mesh().tris)
+   * @param {Float64Array} planes the z of every layer plane (contour_mesh().planes)
+   * @returns {Promise<object>} counts, `origins` (min x, min y per layer, kernel units), `openLayers` (1 per layer with a
+   *   segment left out of every closed loop: that layer's input is incomplete and the kernel rebuilds it), `openSegments`
+   *   and `input`, contour_gpu.js' union input with its arrays as GPU buffers
+   */
+  const cut = async (triangles, planes) => {
+    const started = performance.now()
+    const segments = await segmentsOf(triangles, planes)
+    const [matcherOverflow] = await readWords(segments.successor, 1, segments.segmentCount)
+    const deadFlags = await readWords(segments.dead, segments.segmentCount)
+    let cancelled = 0
+    for (const flag of deadFlags) cancelled += flag
+    const laid = await loopsOf(segments)
+    const loopSegments = laid.slotCount - laid.headCount
+    return {
+      ms: performance.now() - started, triangleCount: triangles.length / 9, rawSegments: segments.segmentCount, cancelled,
+      openSegments: segments.segmentCount - cancelled - loopSegments, matcherOverflow, origins: laid.origins, openLayers: laid.openLayers,
+      input: { layerCount: laid.layerCount, segmentCount: laid.segmentCount, polygonCount: laid.polygonCount, cellCount: laid.cellCount,
+        cellEntryCount: laid.cellEntryCount, points: { gpuBuffer: laid.points }, layerInfo: { gpuBuffer: laid.layerInfo },
+        polyInfo: { gpuBuffer: laid.polygonInfo }, polyLayer: { gpuBuffer: laid.polygonInfo, offset: laid.polygonCount * 16 } },
+    }
+  }
+  const dispose = () => {
+    for (const kept of buffers.values()) kept.destroy()
+    buffers.clear()
+    for (const item of transient) item.destroy()
+    transient = []
+    zero.destroy()
+  }
+  return { cut, dispose }
+}