three-slicer-viewer 0.3.2 → 0.3.3

package/src/core/paint_tools.js

@@ -0,0 +1,8 @@
+// The painting tools that act on one click instead of a drag (upstream's Smart fill, Bucket fill and the single-facet
+//  POINTER). Read by the brush input, both brush panels and the slicer worker (`three-slicer-viewer/paint`), so a
+//  tool added here is one the whole paint path treats as a fill.
+export const FILL_TOOLS = new Set(['smart', 'bucket', 'triangle'])
+
+// The fills that spread across neighbouring facets and so take a fill angle. Triangle is bucket fill with the
+//  propagation off (the worker passes -1 as its angle), so it has no angle to set.
+export const ANGLE_FILL_TOOLS = new Set(['smart', 'bucket'])

package/src/settings/kernel_setting_keys.js

@@ -1,14 +1,19 @@
 // AUTO-GENERATED by types/gen_kernel_params.mjs — DO NOT EDIT.
 // The schema keys deriveKernelParams consumes (the distinct "From setting" column of engine/PARAMS.md).
 export const KERNEL_SETTING_KEYS = [
+  "alternate_extra_wall",
   "bottom_shell_layers",
+  "bottom_solid_infill_flow_ratio",
   "bottom_surface_filament_id",
+  "bridge_flow",
   "bridge_no_support",
   "bridge_speed",
+  "brim_flow_ratio",
   "brim_object_gap",
   "brim_width",
   "close_fan_the_first_x_layers",
   "default_acceleration",
+  "detect_thin_wall",
   "enable_arc_fitting",
   "enable_pressure_advance",
   "enable_prime_tower",
@@ -17,27 +22,36 @@ export const KERNEL_SETTING_KEYS = [
   "filament_cost",
   "filament_density",
   "filament_diameter",
+  "filament_end_gcode",
   "filament_flow_ratio",
   "filament_map",
+  "filament_max_volumetric_speed",
   "filament_retraction_length",
   "filament_retraction_minimum_travel",
   "filament_retraction_speed",
   "filament_settings_id",
   "filament_type",
   "filament_z_hop",
+  "filter_out_gap_fill",
+  "first_layer_flow_ratio",
   "flush_into_infill",
   "flush_multiplier",
   "flush_volumes_matrix",
   "full_fan_speed_layer",
+  "gap_fill_flow_ratio",
+  "gap_infill_speed",
   "hot_plate_temp",
   "independent_support_layer_height",
   "infill_direction",
+  "infill_wall_overlap",
   "initial_layer_line_width",
   "initial_layer_print_height",
   "initial_layer_speed",
   "inner_wall_filament_id",
+  "inner_wall_flow_ratio",
   "inner_wall_line_width",
   "internal_solid_filament_id",
+  "internal_solid_infill_flow_ratio",
   "internal_solid_infill_line_width",
   "ironing_flow",
   "ironing_spacing",
@@ -60,12 +74,16 @@ export const KERNEL_SETTING_KEYS = [
   "max_volumetric_extrusion_rate_slope",
   "nozzle_diameter",
   "nozzle_temperature",
+  "only_one_wall_first_layer",
   "outer_wall_filament_id",
+  "outer_wall_flow_ratio",
   "outer_wall_line_width",
   "outer_wall_speed",
+  "precise_outer_wall",
   "pressure_advance",
   "prime_tower_width",
   "prime_volume",
+  "print_flow_ratio",
   "printable_area",
   "printable_height",
   "raft_contact_distance",
@@ -76,14 +94,17 @@ export const KERNEL_SETTING_KEYS = [
   "retraction_length",
   "retraction_minimum_travel",
   "retraction_speed",
+  "scarf_joint_flow_ratio",
   "seam_position",
   "seam_slope_type",
+  "set_other_flow_ratios",
   "skirt_distance",
   "skirt_height",
   "skirt_loops",
   "slow_down_layer_time",
   "sparse_infill_density",
   "sparse_infill_filament_id",
+  "sparse_infill_flow_ratio",
   "sparse_infill_line_width",
   "sparse_infill_pattern",
   "spiral_mode",
@@ -93,8 +114,10 @@ export const KERNEL_SETTING_KEYS = [
   "support_bottom_z_distance",
   "support_expansion",
   "support_filament",
+  "support_flow_ratio",
   "support_interface_bottom_layers",
   "support_interface_filament",
+  "support_interface_flow_ratio",
   "support_interface_pattern",
   "support_interface_spacing",
   "support_interface_top_layers",
@@ -108,7 +131,10 @@ export const KERNEL_SETTING_KEYS = [
   "support_threshold_overlap",
   "support_top_z_distance",
   "support_type",
+  "thick_bridges",
+  "top_bottom_infill_wall_overlap",
   "top_shell_layers",
+  "top_solid_infill_flow_ratio",
   "top_surface_filament_id",
   "top_surface_line_width",
   "travel_acceleration",
@@ -124,8 +150,10 @@ export const KERNEL_SETTING_KEYS = [
   "tree_support_tip_diameter",
   "tree_support_top_rate",
   "tree_support_wall_count",
+  "wall_direction",
   "wall_generator",
   "wall_loops",
+  "wall_sequence",
   "wipe_tower_x",
   "wipe_tower_y",
   "z_hop",

package/src/settings/settings_core.js

@@ -59,12 +59,29 @@ const PASSTHROUGH_NUM = [
   //  rather than silently dropping them.
   'outer_wall_filament_id', 'inner_wall_filament_id', 'sparse_infill_filament_id',
   'top_surface_filament_id', 'bottom_surface_filament_id', 'internal_solid_filament_id',
+  // Read by the kernel's classic wall generator (wall_generator = classic).
+  'filter_out_gap_fill',
+  // Upstream's flow multipliers (GCode.cpp:7343-7390): the print-wide one and each role's own (emit.cpp role_flow_ratio).
+  'print_flow_ratio', 'top_solid_infill_flow_ratio', 'bottom_solid_infill_flow_ratio', 'bridge_flow', 'brim_flow_ratio',
+  'scarf_joint_flow_ratio', 'outer_wall_flow_ratio', 'inner_wall_flow_ratio', 'sparse_infill_flow_ratio',
+  'internal_solid_infill_flow_ratio', 'gap_fill_flow_ratio', 'support_flow_ratio', 'support_interface_flow_ratio',
+  'first_layer_flow_ratio',
 ]
-const PASSTHROUGH_BOOL = ['independent_support_layer_height']
+const PASSTHROUGH_BOOL = ['independent_support_layer_height',
+  'detect_thin_wall', 'precise_outer_wall', 'only_one_wall_first_layer', 'alternate_extra_wall',
+  // thick_bridges picks upstream's round bridge thread; set_other_flow_ratios turns the per-role ratios on.
+  'thick_bridges', 'set_other_flow_ratios']
+// coPercent options. A 3mf import delivers "15%" while the schema default is the bare 15, so the sign is stripped and
+//  the kernel gets the number of percent either way.
+const PASSTHROUGH_PERCENT = ['infill_wall_overlap', 'top_bottom_infill_wall_overlap']
+// coEnum options the kernel reads by their upstream spelling.
+const PASSTHROUGH_STR = ['wall_sequence', 'wall_direction']
 // Per-filament vectors, one entry per filament, passed positionally like every other per-extruder array.
 //  filament_map is which physical extruder each filament sits in; density and cost turn extruded millimetres into
-//  the grams and currency the G-code footer reports.
-const PASSTHROUGH_NUM_VECTOR = ['filament_map', 'filament_density', 'filament_cost']
+//  the grams and currency the G-code footer reports. gap_infill_speed is per extruder rather than per filament; the
+//  kernel reads its first entry, the wall filament's on the single-material path. filament_max_volumetric_speed caps
+//  every extrusion's speed as upstream does (GCode.cpp:7492).
+const PASSTHROUGH_NUM_VECTOR = ['filament_map', 'filament_density', 'filament_cost', 'gap_infill_speed', 'filament_max_volumetric_speed']
 // Material identity. The kernel needs the type for the two decisions upstream makes by material name (PETG's
 //  extra unretract, TPU on the first layer) and the settings id for the footer.
 const PASSTHROUGH_STR_VECTOR = ['filament_type', 'filament_settings_id']
@@ -192,6 +209,22 @@ export function serializeProjectSettings(settings) {
 }
 
 
+// Issue 63: the custom G-code the kernel expands with upstream's PlaceholderParser (custom_gcode.cpp). The kernel
+//  gets the flattened settings it expands them against only when one of these holds text, which keeps every caller
+//  without a template on the raw path, byte-identical to before. The settings go in the form a 3mf's
+//  project_settings.config stores (serializeProjectSettings), as one JSON string: the kernel's flat key search
+//  never looks inside a string value, so no key in it can be taken for a kernel parameter the map omits.
+//  The kernel names the same templates in custom_gcode.cpp; test_custom_gcode.mjs checks each key here is expanded there.
+export const CUSTOM_GCODE_KEYS = ['machine_start_gcode', 'machine_end_gcode', 'filament_end_gcode']
+
+function placeholderConfig(settings, plate) {
+  const hasText = key => [settings?.[key]].flat().some(value => String(value ?? '').trim() !== '')
+  if (!CUSTOM_GCODE_KEYS.some(hasText)) return {}
+  // upstream's Print::get_plate_number_formatted: the 1-based plate, zero-padded to two digits
+  const plateNumber = String(plate + 1).padStart(2, '0')
+  return { placeholder_config: JSON.stringify({ ...serializeProjectSettings(settings), $plate_number: plateNumber }) }
+}
+
 // Right-panel settings values -> kernel parameters (derived from schema keys)
 //  opts.plate: which plate's entry to take from per-plate array options (wipe_tower_x/y — upstream coFloats,
 //  one entry per plate). Defaults to 0, so every existing caller reads exactly what it always did.
@@ -228,8 +261,13 @@ export function deriveKernelParams(settings, opts) {
   //  the default style silently sliced grid. An explicit non-tree style keeps winning over the type.
   const styleRaw = str('support_style')
   const typeRaw = str('support_type')
-  const support_style =
-    /tree|organic/i.test(styleRaw) || (/tree/i.test(typeRaw) && styleRaw === 'default') ? 'tree' : 'grid'
+  let support_style = 'grid'
+  if (/tree|organic/i.test(styleRaw) || (/tree/i.test(typeRaw) && styleRaw === 'default')) support_style = 'tree'
+  // Which tree. Upstream's slim / strong / hybrid run TreeSupport and organic runs TreeSupport3D
+  //  (SupportParameters.hpp:190-204), and a tree type left on 'default' resolves to organic there. The kernel defaults to
+  //  organic too, so only the three others are sent: an organic slice keeps exactly the parameters it had. Before this the
+  //  style never reached the kernel and every tree style sliced organic.
+  const tree_style = { tree_slim: 'slim', tree_strong: 'strong', tree_hybrid: 'hybrid' }[styleRaw]
 
   // Bed: bounding box of the first rectangle in printable_area
   const pa = settingRaw(settings, 'printable_area')
@@ -309,6 +347,12 @@ export function deriveKernelParams(settings, opts) {
       if (Number.isFinite(value)) passthrough[key] = value
     }
     for (const key of PASSTHROUGH_BOOL) if (present(key)) passthrough[key] = bool(key, false)
+    for (const key of PASSTHROUGH_PERCENT) {
+      if (!present(key)) continue
+      const value = Number(String(S(key)).replace('%', ''))
+      if (Number.isFinite(value)) passthrough[key] = value
+    }
+    for (const key of PASSTHROUGH_STR) if (present(key)) passthrough[key] = String(S(key))
     for (const key of PASSTHROUGH_NUM_VECTOR) {
       if (!present(key)) continue
       const raw = settings[key]
@@ -330,6 +374,10 @@ export function deriveKernelParams(settings, opts) {
     }
   }
 
+  // Sent only for the three non-organic styles (see tree_style above), so an empty map still derives the same keys.
+  const treeStyle = {}
+  if (tree_style) treeStyle.tree_style = tree_style
+
   const perExtruder = {}
   for (const [param, key, scalar] of [
     ['extruder_nozzle_temp', 'nozzle_temperature', num('nozzle_temperature')],
@@ -352,6 +400,7 @@ export function deriveKernelParams(settings, opts) {
     ...widths,
     ...machine,
     ...passthrough,     // present only for keys the settings map actually holds (see PASSTHROUGH_* above)
+    ...treeStyle,
     layer_height: num('layer_height'),
     first_layer_height: num('initial_layer_print_height'),
     line_width,
@@ -392,6 +441,7 @@ export function deriveKernelParams(settings, opts) {
     //  to it would rewrite the emitted G-code for every caller. The kernel keeps its own preamble when these are empty.
     machine_start_gcode: String(settings?.machine_start_gcode ?? ''),
     machine_end_gcode: String(settings?.machine_end_gcode ?? ''),
+    ...placeholderConfig(settings, plate),
     enable_support: bool('enable_support'),
     support_threshold_angle: num('support_threshold_angle'),
     support_top_z_distance: num('support_top_z_distance'),

package/types/paint.d.ts

@@ -0,0 +1,7 @@
+// three-slicer-viewer/paint — the painting tool names the viewer and the slicer worker share.
+
+/** The tools that fill on one click rather than paint along a drag: 'smart', 'bucket', 'triangle'. */
+export const FILL_TOOLS: ReadonlySet<string>
+
+/** The fills that spread across neighbouring facets and take a fill angle: 'smart', 'bucket'. */
+export const ANGLE_FILL_TOOLS: ReadonlySet<string>

package/types/viewer.d.ts

@@ -169,7 +169,7 @@ export interface ViewportProps {
  *   way: OrbitControls preventDefaults `contextmenu` itself.
  * - `logs` — console diagnostics, from the component and from the slice worker.
  */
-export type ViewportFeature = 'shortcuts' | 'warmup' | 'drop' | 'filePicker' | 'contextMenu' | 'logs'
+export type ViewportFeature = 'shortcuts' | 'warmup' | 'drop' | 'filePicker' | 'contextMenu' | 'logs' | 'versionBadge'
 
 /**
  * The panels that accept `'readonly'` as well as `true`/`false` — the right column and the cards in it. Everything

package/dist/parse_3mf-BZISF3eW.js

@@ -1,327 +0,0 @@
-import { unzip as Y, unzipSync as H } from "three/examples/jsm/libs/fflate.module.js";
-import { S as W } from "./viewer_defaults-B7UUZ582.js";
-function q(t) {
-  return new Promise((o) => {
-    let s = !1;
-    const e = (r) => {
-      s || (s = !0, o(r));
-    };
-    try {
-      Y(t, (r, i) => e(r ? H(t) : i));
-    } catch {
-      e(H(t));
-    }
-  });
-}
-const L = [1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0];
-function K(t, o) {
-  const s = new Array(12);
-  for (let e = 0; e < 4; e++)
-    for (let r = 0; r < 3; r++)
-      s[e * 3 + r] = t[e * 3] * o[r] + t[e * 3 + 1] * o[3 + r] + t[e * 3 + 2] * o[6 + r] + (e === 3 ? o[9 + r] : 0);
-  return s;
-}
-function U(t) {
-  if (!t) return L;
-  const o = t.trim().split(/\s+/).map(Number);
-  return o.length === 12 && o.every(Number.isFinite) ? o : L;
-}
-const x = {};
-function f(t, o) {
-  const e = (x[o] || (x[o] = new RegExp(`\\b${o}\\s*=\\s*"([^"]*)"`))).exec(t);
-  return e ? e[1] : null;
-}
-const B = /<vertex\s+x="([^"]*)"\s+y="([^"]*)"\s+z="([^"]*)"/g, D = /<triangle\s+v1="([^"]*)"\s+v2="([^"]*)"\s+v3="([^"]*)"([^>]*)/g, C = [
-  ["paint_color", "color"],
-  // multi-material: state 1..16 == Extruder1..16
-  ["paint_supports", "supports"],
-  // support enforcer/blocker: states 1 and 2
-  ["paint_seam", "seam"],
-  // unsupported by the kernel — collected for the warning only
-  ["paint_fuzzy_skin", "fuzzy"]
-  // ditto
-];
-function G() {
-  return { color: /* @__PURE__ */ new Map(), supports: /* @__PURE__ */ new Map(), seam: /* @__PURE__ */ new Map(), fuzzy: /* @__PURE__ */ new Map() };
-}
-function Q(t) {
-  return !t || C.every(([, o]) => t[o].size === 0);
-}
-function J(t, o, s) {
-  for (const [e, r] of C) {
-    if (!t.includes(e)) continue;
-    const i = f(t, e);
-    i && s[r].set(o, i);
-  }
-}
-function Z(t) {
-  const o = [];
-  B.lastIndex = 0;
-  let s;
-  for (; s = B.exec(t); ) o.push(+s[1], +s[2], +s[3]);
-  if (!o.length)
-    for (const i of t.match(/<vertex\b[^>]*>/g) || []) o.push(+f(i, "x"), +f(i, "y"), +f(i, "z"));
-  if (o.length < 9) return null;
-  const e = [], r = G();
-  for (D.lastIndex = 0; s = D.exec(t); ) {
-    const i = e.length / 3;
-    e.push(+s[1], +s[2], +s[3]), s[4].length > 2 && J(s[4], i, r);
-  }
-  if (!e.length)
-    for (const i of t.match(/<triangle\b[^>]*>/g) || []) {
-      const p = e.length / 3;
-      e.push(+f(i, "v1"), +f(i, "v2"), +f(i, "v3")), J(i, p, r);
-    }
-  return e.length ? { verts: o, tris: e, paint: r } : null;
-}
-function tt(t) {
-  const o = /* @__PURE__ */ new Map(), s = /<object\b([^>]*)>([\s\S]*?)<\/object>/g;
-  let e;
-  for (; e = s.exec(t); ) {
-    const p = f(e[1], "id");
-    if (!p) continue;
-    const u = e[2], n = [];
-    for (const a of u.match(/<component\b[^>]*>/g) || []) {
-      const c = f(a, "objectid");
-      c && n.push({ objectid: c, path: f(a, "p:path") || f(a, "path"), transform: U(f(a, "transform")) });
-    }
-    o.set(p, n.length ? { components: n } : { mesh: Z(u) });
-  }
-  const r = [], i = /<build\b[^>]*>([\s\S]*?)<\/build>/.exec(t);
-  if (i)
-    for (const p of i[1].match(/<item\b[^>]*>/g) || []) {
-      const u = f(p, "objectid");
-      u && r.push({ objectid: u, path: f(p, "p:path") || f(p, "path"), transform: U(f(p, "transform")) });
-    }
-  return { objects: o, items: r };
-}
-function k(t) {
-  const o = String(t).replace(/^\/+/, "");
-  return o.includes("%") ? decodeURIComponent(o) : o;
-}
-function R(t) {
-  const o = {};
-  for (const s of t.match(/<metadata\b[^>]*>/g) || []) {
-    const e = f(s, "key");
-    e && (o[e] = f(s, "value") ?? "");
-  }
-  return o;
-}
-function et(t) {
-  const o = /* @__PURE__ */ new Map(), s = /* @__PURE__ */ new Map(), e = /<object\b([^>]*)>([\s\S]*?)<\/object>/g;
-  let r;
-  for (; r = e.exec(t); ) {
-    const u = f(r[1], "id");
-    if (u) {
-      const n = r[2];
-      o.set(u, R(n.replace(/<(?:part|volume)\b[\s\S]*?<\/(?:part|volume)>/g, "")));
-      const a = [];
-      for (const c of n.match(/<volume\b[\s\S]*?<\/volume>/g) || []) {
-        const d = R(c).volume_type, y = d === "SupportBlocker" ? "blocker" : d === "SupportEnforcer" ? "enforcer" : null, _ = Number(f(c, "firstid")), S = Number(f(c, "lastid"));
-        y && Number.isInteger(_) && Number.isInteger(S) && _ >= 0 && S >= _ && a.push({ firstTriangle: _, lastTriangle: S, kind: y });
-      }
-      a.length && s.set(u, a);
-    }
-  }
-  const i = [], p = /<plate\b[^>]*>([\s\S]*?)<\/plate>/g;
-  for (; r = p.exec(t); ) {
-    const u = r[1], n = R(u.replace(/<model_instance\b[\s\S]*?<\/model_instance>/g, "")), a = [];
-    for (const c of u.match(/<model_instance\b[\s\S]*?<\/model_instance>/g) || []) {
-      const d = R(c).object_id;
-      d && a.push(d);
-    }
-    i.push({ index: Math.max(0, (Number(n.plater_id) || i.length + 1) - 1), objectIds: a, gcodeFile: n.gcode_file || null });
-  }
-  return { objects: o, plates: i, volumes: s };
-}
-const nt = Object.freeze({
-  manualSupportPoints: "prepared-roundtrip",
-  drainHoles: "preserved-unsupported",
-  modifierVolumes: "prepared-mask-filtering",
-  uiEditing: "unavailable"
-});
-function V(t, o, s, e, r) {
-  const i = /* @__PURE__ */ new Map();
-  if (!t?.trim()) return i;
-  const p = t.trim().split(/\r?\n/), u = new RegExp(`^${o}_format_version=(\\d+)$`).exec(p[0]), n = u ? Number(u[1]) : 0;
-  for (const a of p.slice(u ? 1 : 0)) {
-    const c = /^object_id=(\d+)\|(.*)$/.exec(a);
-    if (!c || i.has(Number(c?.[1]))) continue;
-    const d = Number(c[1]), y = c[2].trim() ? c[2].trim().split(/\s+/).map(Number) : [], _ = s(n);
-    if (!_ || y.length % _ !== 0 || y.some((l) => !Number.isFinite(l))) {
-      e.push({ code: o === "support_points" ? "SLA_SUPPORT_POINT_COUNT" : "SLA_DRAIN_HOLE_COUNT", object: d }), i.set(d, []);
-      continue;
-    }
-    const S = [];
-    for (let l = 0; l < y.length; l += _) S.push(r(y.slice(l, l + _), n));
-    i.set(d, S);
-  }
-  return i;
-}
-function X(t, o) {
-  const [s, e, r] = o;
-  return [s * t[0] + e * t[3] + r * t[6] + t[9], s * t[1] + e * t[4] + r * t[7] + t[10], s * t[2] + e * t[5] + r * t[8] + t[11]];
-}
-function ot(t, o) {
-  const [s, e, r] = o, i = [s * t[0] + e * t[3] + r * t[6], s * t[1] + e * t[4] + r * t[7], s * t[2] + e * t[5] + r * t[8]], p = Math.hypot(...i);
-  return p ? i.map((u) => u / p) : i;
-}
-function st(t, o) {
-  const s = (n) => {
-    const a = t.get(n);
-    return a ? o.decode(a) : null;
-  }, e = {
-    settings: null,
-    // Metadata/project_settings.config — the flattened preset (raw upstream strings)
-    objectMeta: /* @__PURE__ */ new Map(),
-    // 3mf object id -> per-object metadata (name, extruder, per-object overrides)
-    plates: [],
-    // [{index, objectIds}]
-    hasLayerHeightProfile: !1,
-    hasCustomGcodePerLayer: !1,
-    volumeMeta: /* @__PURE__ */ new Map(),
-    sla: { capabilities: { ...nt }, issues: [], supportPoints: /* @__PURE__ */ new Map(), drainHoles: /* @__PURE__ */ new Map() },
-    viewerSettings: null,
-    // Metadata/three_slicer_settings.json — this package's own member (write_3mf.js)
-    plateSettings: null,
-    //  ...its two halves: global viewer knobs, and per-plate overrides keyed by plate index
-    plateCount: null,
-    //  ...and the plate count it was saved with (empty plates hold no <plate> record)
-    gcodePlates: null
-    // a .gcode.3mf's sliced plates: [{index, gcode}] (write_3mf.js writeGcode3MF), else null
-  }, r = s("Metadata/project_settings.config");
-  if (r)
-    try {
-      e.settings = JSON.parse(r);
-    } catch {
-      e.settings = null;
-    }
-  const i = s("Metadata/three_slicer_settings.json");
-  if (i) {
-    let n = null;
-    try {
-      n = JSON.parse(i);
-    } catch {
-      n = null;
-    }
-    const a = (c) => c && typeof c == "object" && !Array.isArray(c);
-    if (a(n)) {
-      a(n.viewer) && Object.keys(n.viewer).length && (e.viewerSettings = n.viewer);
-      let c = [];
-      a(n.plates) && (c = Object.entries(n.plates));
-      const d = c.filter(([y, _]) => /^\d+$/.test(y) && a(_) && Object.keys(_).length);
-      d.length && (e.plateSettings = Object.fromEntries(d.map(([y, _]) => [Number(y), _]))), Number.isInteger(n.plateCount) && n.plateCount >= 1 && (e.plateCount = n.plateCount);
-    }
-  }
-  const p = s("Metadata/model_settings.config");
-  if (p) {
-    const n = et(p);
-    e.objectMeta = n.objects, e.plates = n.plates, e.volumeMeta = n.volumes;
-  }
-  const u = e.plates.map((n) => ({ index: n.index, gcode: n.gcodeFile && s(k(n.gcodeFile)) })).filter((n) => n.gcode);
-  return u.length && (e.gcodePlates = u), e.sla.supportPoints = V(
-    s("Metadata/Slic3r_PE_sla_support_points.txt"),
-    "support_points",
-    (n) => n === 0 ? 3 : n === 1 ? 5 : 0,
-    e.sla.issues,
-    (n, a) => ({
-      position: n.slice(0, 3),
-      radius: a === 0 ? W : n[3],
-      type: a === 0 || n[4] === 2 ? "manual" : n[4] === 1 ? "island" : "slope"
-    })
-  ), e.sla.drainHoles = V(
-    s("Metadata/Slic3r_PE_sla_drain_holes.txt"),
-    "drain_holes",
-    (n) => n === 1 ? 8 : 0,
-    e.sla.issues,
-    (n) => {
-      const a = Math.hypot(n[3], n[4], n[5]), c = a ? n.slice(3, 6).map((d) => d / a) : n.slice(3, 6);
-      return { position: n.slice(0, 3).map((d, y) => d + c[y]), normal: c, radius: n[6], height: n[7] - 1 };
-    }
-  ), e.hasLayerHeightProfile = !!s("Metadata/layer_heights_profile.txt")?.trim(), e.hasCustomGcodePerLayer = !!s("Metadata/custom_gcode_per_layer.xml")?.trim(), e;
-}
-async function ct(t, o = "model") {
-  const s = ArrayBuffer.isView(t) ? new Uint8Array(t.buffer, t.byteOffset, t.byteLength) : new Uint8Array(t), e = await q(s), r = /* @__PURE__ */ new Map();
-  for (const l of Object.keys(e)) r.set(k(l), e[l]);
-  const i = new TextDecoder(), p = /* @__PURE__ */ new Map(), u = (l) => {
-    const w = k(l);
-    if (p.has(w)) return p.get(w);
-    const m = r.get(w), M = m ? tt(i.decode(m)) : null;
-    return p.set(w, M), M;
-  };
-  let n = "3D/3dmodel.model";
-  const a = r.get("_rels/.rels");
-  if (a) {
-    for (const l of i.decode(a).match(/<Relationship\b[^>]*>/g) || [])
-      if ((f(l, "Type") || "").endsWith("/3dmodel")) {
-        n = k(f(l, "Target"));
-        break;
-      }
-  }
-  const c = st(r, i), d = u(n);
-  if (!d && c.gcodePlates) return { objects: [], project: c };
-  if (!d) throw new Error(`3MF root model not found: ${n}`);
-  const y = [], _ = (l, w, m, M, P, N) => {
-    if (N > 16) return;
-    const T = u(w)?.objects.get(l);
-    if (!T) return;
-    if (T.components) {
-      for (const j of T.components) _(j.objectid, j.path || w, K(j.transform, m), M, P, N + 1);
-      return;
-    }
-    if (!T.mesh) return;
-    const { verts: E, tris: I, paint: v } = T.mesh, z = M.length / 9;
-    for (let j = 0; j < I.length; j++) {
-      const h = I[j] * 3, b = E[h], g = E[h + 1], A = E[h + 2];
-      M.push(
-        b * m[0] + g * m[3] + A * m[6] + m[9],
-        b * m[1] + g * m[4] + A * m[7] + m[10],
-        b * m[2] + g * m[5] + A * m[8] + m[11]
-      );
-    }
-    if (v) for (const [, j] of C)
-      for (const [h, b] of v[j]) P[j].set(z + h, b);
-  }, S = d.items.length ? d.items : [...d.objects.keys()].filter((l) => d.objects.get(l).mesh).map((l) => ({ objectid: l, path: n, transform: L }));
-  return S.forEach((l, w) => {
-    const m = [], M = G();
-    if (_(l.objectid, l.path || n, l.transform, m, M, 0), m.length < 9) return;
-    let P = new Float32Array(m);
-    const N = [], O = c.volumeMeta.get(l.objectid) || [];
-    if (O.length) {
-      const h = /* @__PURE__ */ new Set();
-      for (let b = 0; b < O.length; b++) {
-        const g = O[b], A = g.firstTriangle * 9, $ = Math.min(m.length, (g.lastTriangle + 1) * 9);
-        if (!(A >= $)) {
-          for (let F = g.firstTriangle; F <= g.lastTriangle; F++) h.add(F);
-          N.push({ id: `${l.objectid}:modifier:${b}`, kind: g.kind, tris: new Float32Array(m.slice(A, $)) });
-        }
-      }
-      if (h.size) {
-        const b = [];
-        for (let g = 0; g < m.length / 9; g++) h.has(g) || b.push(...m.slice(g * 9, g * 9 + 9));
-        P = new Float32Array(b);
-      }
-    }
-    const T = (c.sla.supportPoints.get(w + 1) || []).map((h) => ({ ...h, position: X(l.transform, h.position) })), E = (c.sla.drainHoles.get(w + 1) || []).map((h) => ({
-      ...h,
-      position: X(l.transform, h.position),
-      normal: ot(l.transform, h.normal)
-    }));
-    let I = 1 / 0, v = 1 / 0, z = -1 / 0, j = -1 / 0;
-    for (let h = 0; h < P.length; h += 3) {
-      const b = P[h], g = P[h + 1];
-      b < I && (I = b), b > z && (z = b), g < v && (v = g), g > j && (j = g);
-    }
-    y.push({
-      name: S.length > 1 ? `${o}#${w + 1}` : o,
-      tris: P,
-      objectid: l.objectid,
-      paint: Q(M) ? null : M,
-      sla: { supportPoints: T, drainHoles: E, modifierVolumes: N },
-      bbox: { minX: I, minY: v, maxX: z, maxY: j }
-    });
-  }), { objects: y, project: c };
-}
-export {
-  ct as p
-};