tencentcloud-sdk-nodejs 4.1.323 → 4.1.325

package/tencentcloud/services/ess/v20201111/ess_models.d.ts

@@ -9321,14 +9321,14 @@ export interface CreatePrepareFlowRequest {
      * <p>执行本接口操作的员工信息。使用此接口时，必须填写userId。<br>支持填入集团子公司经办人 userId 代发合同。</p><p>注: <code>在调用此接口时，请确保指定的员工已获得所需的接口调用权限，并具备接口传入的相应资源的数据权限。</code></p>
      */
     Operator: UserInfo;
-    /**
-     * <p>资源id，与ResourceType相对应，取值范围：</p><ul><li>文件Id（通过UploadFiles获取文件资源Id）</li><li>模板Id（通过控制台创建模板后获取模板Id）</li><li>草稿Id（通过嵌入页面保存草稿后获取草稿Id）</li></ul>注意：需要同时设置 ResourceType 参数指定资源类型
-     */
-    ResourceId: string;
     /**
      * <p>自定义的合同流程的名称，长度不能超过200个字符，只能由中文汉字、中文标点、英文字母、阿拉伯数字、空格、小括号、中括号、中划线、下划线以及（,）、（;）、（.）、(&amp;)、（+）组成。</p><p>该名称还将用于合同签署完成后文件下载的默认文件名称。</p>
      */
     FlowName: string;
+    /**
+     * <p>资源id，与ResourceType相对应，取值范围：</p><ul><li>文件Id（通过UploadFiles获取文件资源Id）</li><li>模板Id（通过控制台创建模板后获取模板Id）</li><li>草稿Id（通过嵌入页面保存草稿后获取草稿Id）</li></ul>注意：需要同时设置 ResourceType 参数指定资源类型
+     */
+    ResourceId?: string;
     /**
      * <p>资源类型，取值有：</p><ul><li> **1**：模板</li><li> **2**：文件（默认值）</li><li> **3**：草稿</li></ul>
      */

package/tencentcloud/services/essbasic/v20210526/essbasic_models.d.ts

@@ -3206,7 +3206,7 @@ export interface CreateConsoleLoginUrlRequest {
      */
     Agent: Agent;
     /**
-     * <p>第三方平台子客的企业名称，请确认该企业名称与企业营业执照中注册的名称完全一致。<br><font color="red"><br>在测试环境联调的过程中，企业名称请统一加上“测试”二字，如：典子谦示例企业测试，否则将无法审核通过。<br>企业名称请使用以下名称, 以下名称可以不用走收录。<br><strong>子客测试专用企业1 - 子客测试专用企业9</strong></font></p><p>注:<br> <code>1. 如果名称中包含英文括号()，请使用中文括号（）代替。</code><br> <code>2、该名称需要与Agent.ProxyOrganizationOpenId相匹配,  企业激活后Agent.ProxyOrganizationOpenId会跟此企业名称一一绑定; 如果您的企业已经在认证授权中或者激活完成，这里修改子客企业名字将不会生效。</code></p>
+     * <p>第三方平台子客的企业名称，请确认该企业名称与企业营业执照中注册的名称完全一致。<br><font color="red"><br>在测试环境联调的过程中，企业名称请再最后统一加上“测试”二字，如：典子谦示例企业测试，否则将无法审核通过。<br></font></p><p>注:<br> <code>1. 如果名称中包含英文括号()，请使用中文括号（）代替。</code><br> <code>2、该名称需要与Agent.ProxyOrganizationOpenId相匹配,  企业激活后Agent.ProxyOrganizationOpenId会跟此企业名称一一绑定; 如果您的企业已经在认证授权中或者激活完成，这里修改子客企业名字将不会生效。</code></p>
      */
     ProxyOrganizationName: string;
     /**

package/tencentcloud/services/goosefs/v20220519/goosefs_client.d.ts

@@ -1,6 +1,6 @@
 import { AbstractClient } from "../../../common/abstract_client";
 import { ClientConfig } from "../../../common/interface";
-import { UpdateFilesetGeneralConfigResponse, CreateDataRepositoryTaskResponse, DeleteFileSystemRequest, DeleteFilesetResponse, ListLoadTasksResponse, UpdateLoadTaskPriorityResponse, DescribeFilesetGeneralConfigRequest, UpdateLoadTaskPriorityRequest, DescribeFilesetsResponse, ExpandCapacityRequest, CancelLoadTaskRequest, BatchDeleteClientNodesRequest, UpdateFilesetResponse, DescribeFileSystemsRequest, AttachFileSystemBucketRequest, MountMultipleStorageFileSystemResponse, CreateDataRepositoryTaskRequest, CreateFilesetRequest, DescribeClusterRoleTokenRequest, MountMultipleStorageFileSystemRequest, DescribeLoadTaskRequest, DescribeFileSystemBucketsRequest, DescribeDataRepositoryTaskStatusResponse, CreateFileSystemRequest, DescribeLoadTaskResponse, DetachFileSystemBucketRequest, ModifyDataRepositoryBandwidthRequest, UpdateFilesetRequest, DescribeCustomerClusterRequest, DescribeFilesetGeneralConfigResponse, CreateFilesetResponse, QueryCrossVpcSubnetSupportForClientNodeResponse, DeleteCrossVpcSubnetSupportForClientNodeResponse, BatchAddClientNodesRequest, BuildClientNodeMountCommandResponse, CreateLoadTaskRequest, ModifyDataRepositoryBandwidthResponse, ModifyDataRepositoryTaskStatusResponse, ExpandCapacityResponse, DeleteFilesetRequest, AddCrossVpcSubnetSupportForClientNodeResponse, QueryClientNodeMountCommandRequest, DescribeClusterRoleTokenResponse, CancelLoadTaskResponse, BatchAddClientNodesResponse, QueryClientNodeMountCommandResponse, DeleteFileSystemResponse, QueryDataRepositoryBandwidthResponse, QueryDataRepositoryBandwidthRequest, DescribeClientNodesResponse, DescribeDataRepositoryTaskStatusRequest, DescribeCustomerClusterResponse, DetachFileSystemBucketResponse, DescribeFileSystemBucketsResponse, DescribeClientNodesRequest, DescribeClusterClientTokenRequest, ListLoadTasksRequest, DescribeClusterClientTokenResponse, CreateFileSystemResponse, DescribeFilesetsRequest, CreateLoadTaskResponse, DescribeFileSystemsResponse, BatchDeleteClientNodesResponse, QueryCrossVpcSubnetSupportForClientNodeRequest, DeleteCrossVpcSubnetSupportForClientNodeRequest, AttachFileSystemBucketResponse, BuildClientNodeMountCommandRequest, BuildCustomerClusterRequest, UpdateFilesetGeneralConfigRequest, BuildCustomerClusterResponse, DeleteCustomerClusterResponse, AddCrossVpcSubnetSupportForClientNodeRequest, ModifyDataRepositoryTaskStatusRequest, DeleteCustomerClusterRequest } from "./goosefs_models";
+import { EnablePolicyRuleResponse, EnablePolicyRuleRequest, CreatePolicyRuleRequest, UpdateFilesetGeneralConfigResponse, AttachFileSystemBucketRequest, DeleteFileSystemRequest, DeleteFilesetResponse, ListLoadTasksResponse, UpdateLoadTaskPriorityResponse, DescribeFilesetGeneralConfigRequest, UpdateLoadTaskPriorityRequest, DescribeFilesetsResponse, ExpandCapacityRequest, CancelLoadTaskRequest, BatchDeleteClientNodesRequest, DescribePolicyRuleExecuteRecordResponse, UpdateFilesetResponse, DeletePolicyRuleRequest, DescribeFileSystemsRequest, CreateDataRepositoryTaskResponse, UpdateFilesetRequest, ModifyDataRepositoryBandwidthRequest, CreateDataRepositoryTaskRequest, CreateFilesetRequest, DescribeClusterRoleTokenRequest, MountMultipleStorageFileSystemRequest, DescribeLoadTaskRequest, DescribeFileSystemBucketsRequest, CreatePolicyRuleResponse, DescribePolicyRuleRequest, CreateFileSystemRequest, DescribeLoadTaskResponse, DisablePolicyRuleRequest, DetachFileSystemBucketRequest, MountMultipleStorageFileSystemResponse, DescribeCustomerClusterRequest, DescribeFilesetGeneralConfigResponse, CreateFilesetResponse, QueryCrossVpcSubnetSupportForClientNodeResponse, DeleteCrossVpcSubnetSupportForClientNodeResponse, BatchAddClientNodesRequest, BuildClientNodeMountCommandResponse, CreateLoadTaskRequest, CancelPolicyRuleExecuteRecordRequest, ModifyDataRepositoryBandwidthResponse, ModifyDataRepositoryTaskStatusResponse, ExpandCapacityResponse, DeleteFilesetRequest, AddCrossVpcSubnetSupportForClientNodeResponse, QueryClientNodeMountCommandRequest, DescribeClusterRoleTokenResponse, AddCrossVpcSubnetSupportForClientNodeRequest, CancelPolicyRuleExecuteRecordResponse, CancelLoadTaskResponse, BatchAddClientNodesResponse, QueryClientNodeMountCommandResponse, DeleteFileSystemResponse, QueryDataRepositoryBandwidthResponse, QueryDataRepositoryBandwidthRequest, DescribeClientNodesResponse, DescribeDataRepositoryTaskStatusRequest, DescribeCustomerClusterResponse, DetachFileSystemBucketResponse, DescribeFileSystemBucketsResponse, DescribeClientNodesRequest, DescribeClusterClientTokenRequest, ListLoadTasksRequest, DescribeClusterClientTokenResponse, CreateFileSystemResponse, DescribeFilesetsRequest, CreateLoadTaskResponse, DisablePolicyRuleResponse, DescribeFileSystemsResponse, BatchDeleteClientNodesResponse, QueryCrossVpcSubnetSupportForClientNodeRequest, DeleteCrossVpcSubnetSupportForClientNodeRequest, DeletePolicyRuleResponse, AttachFileSystemBucketResponse, BuildClientNodeMountCommandRequest, BuildCustomerClusterRequest, DescribePolicyRuleResponse, DescribePolicyRuleExecuteRecordRequest, UpdateFilesetGeneralConfigRequest, BuildCustomerClusterResponse, DeleteCustomerClusterResponse, DescribeDataRepositoryTaskStatusResponse, ModifyDataRepositoryTaskStatusRequest, DeleteCustomerClusterRequest } from "./goosefs_models";
 /**
  * goosefs client
  * @class
@@ -15,6 +15,10 @@ export declare class Client extends AbstractClient {
      * 扩展文件系统容量
      */
     ExpandCapacity(req: ExpandCapacityRequest, cb?: (error: string, rep: ExpandCapacityResponse) => void): Promise<ExpandCapacityResponse>;
+    /**
+     * 取消正在执行的扫描任务，正在扫描的任务取消后没有结果
+     */
+    CancelPolicyRuleExecuteRecord(req: CancelPolicyRuleExecuteRecordRequest, cb?: (error: string, rep: CancelPolicyRuleExecuteRecordResponse) => void): Promise<CancelPolicyRuleExecuteRecordResponse>;
     /**
      * 删除客户端集群
      */
@@ -47,14 +51,26 @@ export declare class Client extends AbstractClient {
      * 修改数据流动任务状态，目前支持任务暂停/恢复
      */
     ModifyDataRepositoryTaskStatus(req: ModifyDataRepositoryTaskStatusRequest, cb?: (error: string, rep: ModifyDataRepositoryTaskStatusResponse) => void): Promise<ModifyDataRepositoryTaskStatusResponse>;
+    /**
+     * 禁用扫描任务
+     */
+    DisablePolicyRule(req: DisablePolicyRuleRequest, cb?: (error: string, rep: DisablePolicyRuleResponse) => void): Promise<DisablePolicyRuleResponse>;
     /**
      * 批量删除客户端节点
      */
     BatchDeleteClientNodes(req: BatchDeleteClientNodesRequest, cb?: (error: string, rep: BatchDeleteClientNodesResponse) => void): Promise<BatchDeleteClientNodesResponse>;
+    /**
+     * 列出指定扫描规则的执行记录
+     */
+    DescribePolicyRuleExecuteRecord(req: DescribePolicyRuleExecuteRecordRequest, cb?: (error: string, rep: DescribePolicyRuleExecuteRecordResponse) => void): Promise<DescribePolicyRuleExecuteRecordResponse>;
     /**
      * 查询Fileset通用配置
      */
     DescribeFilesetGeneralConfig(req: DescribeFilesetGeneralConfigRequest, cb?: (error: string, rep: DescribeFilesetGeneralConfigResponse) => void): Promise<DescribeFilesetGeneralConfigResponse>;
+    /**
+     * 列出所有的扫描规则
+     */
+    DescribePolicyRule(req: DescribePolicyRuleRequest, cb?: (error: string, rep: DescribePolicyRuleResponse) => void): Promise<DescribePolicyRuleResponse>;
     /**
      * 列出该集群下所有预热任务。注意，该接口需要 GooseFS 集群版本 ≥ 1.5.1。
      */
@@ -103,10 +119,18 @@ export declare class Client extends AbstractClient {
      * 查询Fileset列表
      */
     DescribeFilesets(req: DescribeFilesetsRequest, cb?: (error: string, rep: DescribeFilesetsResponse) => void): Promise<DescribeFilesetsResponse>;
+    /**
+     * 删除扫描规则
+     */
+    DeletePolicyRule(req: DeletePolicyRuleRequest, cb?: (error: string, rep: DeletePolicyRuleResponse) => void): Promise<DeletePolicyRuleResponse>;
     /**
      * 构建客户端集群
      */
     BuildCustomerCluster(req: BuildCustomerClusterRequest, cb?: (error: string, rep: BuildCustomerClusterResponse) => void): Promise<BuildCustomerClusterResponse>;
+    /**
+     * 启用扫描任务
+     */
+    EnablePolicyRule(req: EnablePolicyRuleRequest, cb?: (error: string, rep: EnablePolicyRuleResponse) => void): Promise<EnablePolicyRuleResponse>;
     /**
      * 查询GooseFS集群角色凭证
      */
@@ -147,6 +171,10 @@ export declare class Client extends AbstractClient {
      * 查询数据流动带宽
      */
     QueryDataRepositoryBandwidth(req: QueryDataRepositoryBandwidthRequest, cb?: (error: string, rep: QueryDataRepositoryBandwidthResponse) => void): Promise<QueryDataRepositoryBandwidthResponse>;
+    /**
+     * 创建数据洞察任务
+     */
+    CreatePolicyRule(req: CreatePolicyRuleRequest, cb?: (error: string, rep: CreatePolicyRuleResponse) => void): Promise<CreatePolicyRuleResponse>;
     /**
      * 创建文件系统
      */

package/tencentcloud/services/goosefs/v20220519/goosefs_client.js

@@ -39,6 +39,12 @@ class Client extends abstract_client_1.AbstractClient {
     async ExpandCapacity(req, cb) {
         return this.request("ExpandCapacity", req, cb);
     }
+    /**
+     * 取消正在执行的扫描任务，正在扫描的任务取消后没有结果
+     */
+    async CancelPolicyRuleExecuteRecord(req, cb) {
+        return this.request("CancelPolicyRuleExecuteRecord", req, cb);
+    }
     /**
      * 删除客户端集群
      */
@@ -87,18 +93,36 @@ class Client extends abstract_client_1.AbstractClient {
     async ModifyDataRepositoryTaskStatus(req, cb) {
         return this.request("ModifyDataRepositoryTaskStatus", req, cb);
     }
+    /**
+     * 禁用扫描任务
+     */
+    async DisablePolicyRule(req, cb) {
+        return this.request("DisablePolicyRule", req, cb);
+    }
     /**
      * 批量删除客户端节点
      */
     async BatchDeleteClientNodes(req, cb) {
         return this.request("BatchDeleteClientNodes", req, cb);
     }
+    /**
+     * 列出指定扫描规则的执行记录
+     */
+    async DescribePolicyRuleExecuteRecord(req, cb) {
+        return this.request("DescribePolicyRuleExecuteRecord", req, cb);
+    }
     /**
      * 查询Fileset通用配置
      */
     async DescribeFilesetGeneralConfig(req, cb) {
         return this.request("DescribeFilesetGeneralConfig", req, cb);
     }
+    /**
+     * 列出所有的扫描规则
+     */
+    async DescribePolicyRule(req, cb) {
+        return this.request("DescribePolicyRule", req, cb);
+    }
     /**
      * 列出该集群下所有预热任务。注意，该接口需要 GooseFS 集群版本 ≥ 1.5.1。
      */
@@ -171,12 +195,24 @@ class Client extends abstract_client_1.AbstractClient {
     async DescribeFilesets(req, cb) {
         return this.request("DescribeFilesets", req, cb);
     }
+    /**
+     * 删除扫描规则
+     */
+    async DeletePolicyRule(req, cb) {
+        return this.request("DeletePolicyRule", req, cb);
+    }
     /**
      * 构建客户端集群
      */
     async BuildCustomerCluster(req, cb) {
         return this.request("BuildCustomerCluster", req, cb);
     }
+    /**
+     * 启用扫描任务
+     */
+    async EnablePolicyRule(req, cb) {
+        return this.request("EnablePolicyRule", req, cb);
+    }
     /**
      * 查询GooseFS集群角色凭证
      */
@@ -237,6 +273,12 @@ class Client extends abstract_client_1.AbstractClient {
     async QueryDataRepositoryBandwidth(req, cb) {
         return this.request("QueryDataRepositoryBandwidth", req, cb);
     }
+    /**
+     * 创建数据洞察任务
+     */
+    async CreatePolicyRule(req, cb) {
+        return this.request("CreatePolicyRule", req, cb);
+    }
     /**
      * 创建文件系统
      */