tencentcloud-sdk-nodejs 4.0.656 → 4.0.657

package/tencentcloud/services/cdn/v20180606/cdn_models.d.ts

@@ -4505,7 +4505,7 @@ export interface ListTopDataResponse {
     /**
      * 各个资源的Top 访问数据详情。
      */
-    Data: Array<TopData>;
+    Data?: Array<TopData>;
     /**
      * 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
      */
@@ -5197,16 +5197,14 @@ export interface DescribePayTypeResponse {
  */
 export interface ListTopDataRequest {
     /**
-     * 查询起始日期：yyyy-MM-dd HH:mm:ss
-  仅支持按天粒度的数据查询，取入参中的天信息作为起始日期
-  返回大于等于起始日期当天 00:00:00 点产生的数据，如 StartTime为2018-09-04 10:40:00，返回数据的起始时间为2018-09-04 00:00:00
+     * 查询起始时间：yyyy-MM-dd HH:mm:ss
+  仅支持按分钟粒度的数据查询，按入参抹去秒位作为起始时间，如 StartTime为2018-09-04 10:40:23，返回数据的起始时间为2018-09-04 10:40:00
   仅支持 90 天内数据查询
      */
     StartTime: string;
     /**
-     * 查询结束日期：yyyy-MM-dd HH:mm:ss
-  仅支持按天粒度的数据查询，取入参中的天信息作为结束日期
-  返回小于等于结束日期当天 23:59:59 产生的数据，如EndTime为2018-09-05 22:40:00，返回数据的结束时间为2018-09-05 23:59:59
+     * 查询结束时间：yyyy-MM-dd HH:mm:ss
+  仅支持按天粒度的数据查询，取入参中的天信息作为结束日期 返回小于等于结束日期当天 23:59:59 产生的数据，如EndTime为2018-09-05 22:40:00，返回数据的结束时间为2018-09-05 23:59:59
   EndTime 需要大于等于 StartTime
      */
     EndTime: string;

package/tencentcloud/services/clb/v20180317/clb_models.d.ts

@@ -186,7 +186,7 @@ export interface CreateLoadBalancerRequest {
     Number?: number;
     /**
      * 仅适用于公网负载均衡。设置跨可用区容灾时的主可用区ID，例如 100001 或 ap-guangzhou-1
-  注：主可用区是需要承载流量的可用区，备可用区默认不承载流量，主可用区不可用时才使用备可用区，平台将为您自动选择最佳备可用区。可通过 [DescribeResources](https://cloud.tencent.com/document/api/214/70213) 接口查询一个地域的主可用区的列表。
+  注：主可用区是需要承载流量的可用区，备可用区默认不承载流量，主可用区不可用时才使用备可用区。目前仅广州、上海、南京、北京、中国香港、首尔地域的 IPv4 版本的 CLB 支持主备可用区。可通过 [DescribeResources](https://cloud.tencent.com/document/api/214/70213) 接口查询一个地域的主可用区的列表。
      */
     MasterZoneId?: string;
     /**
@@ -348,7 +348,7 @@ export interface CloneLoadBalancerRequest {
      */
     InternetAccessible?: InternetAccessible;
     /**
-     * 仅适用于公网负载均衡。CMCC | CTCC | CUCC，分别对应 移动 | 电信 | 联通，如果不指定本参数，则默认使用BGP。可通过 [DescribeResources](https://cloud.tencent.com/document/api/214/70213)  接口查询一个地域所支持的Isp。如果指定运营商，则网络计费式只能使用按带宽包计费(BANDWIDTH_PACKAGE)。
+     * 仅适用于公网负载均衡。CMCC | CTCC | CUCC，分别对应 移动 | 电信 | 联通，如果不指定本参数，则默认使用BGP。可通过 [DescribeResources](https://cloud.tencent.com/document/api/214/70213)  接口查询一个地域所支持的Isp。如果指定运营商，则网络计费模式只能使用按带宽包计费(BANDWIDTH_PACKAGE)。
      */
     VipIsp?: string;
     /**
@@ -2030,7 +2030,7 @@ export interface HealthCheck {
      */
     HttpCheckPath?: string;
     /**
-     * 健康检查域名（仅适用于HTTP/HTTPS监听器和TCP监听器的HTTP健康检查方式。针对TCP监听器，当使用HTTP健康检查方式时，建议该参数配置为必填项）。
+     * 健康检查域名（仅适用于HTTP/HTTPS监听器和TCP监听器的HTTP健康检查方式。针对TCP监听器，当使用HTTP健康检查方式时，该参数为必填项）。
   注意：此字段可能返回 null，表示取不到有效值。
      */
     HttpCheckDomain?: string;
@@ -4671,7 +4671,7 @@ export interface RewriteLocationMap {
      */
     SourceLocationId: string;
     /**
-     * 重定向至的目标转发规则ID
+     * 重定向目标转发规则的ID
      */
     TargetLocationId: string;
     /**

package/tencentcloud/services/ess/v20201111/ess_models.d.ts

@@ -2134,7 +2134,7 @@ export interface FlowGroupInfo {
      */
     Unordered?: boolean;
     /**
-     * 合同（流程）发起方的填写控件，用户
+     * 合同（流程）发起方的填写控件, 由发起方进行在发起时进行填充
      */
     Components?: Array<Component>;
     /**

package/tencentcloud/services/index.d.ts

@@ -120,6 +120,7 @@ export { iottid } from "./iottid";
 export { iotvideo } from "./iotvideo";
 export { iotvideoindustry } from "./iotvideoindustry";
 export { irp } from "./irp";
+export { iss } from "./iss";
 export { ivld } from "./ivld";
 export { keewidb } from "./keewidb";
 export { kms } from "./kms";

package/tencentcloud/services/index.js

@@ -244,6 +244,8 @@ var iotvideoindustry_1 = require("./iotvideoindustry");
 Object.defineProperty(exports, "iotvideoindustry", { enumerable: true, get: function () { return iotvideoindustry_1.iotvideoindustry; } });
 var irp_1 = require("./irp");
 Object.defineProperty(exports, "irp", { enumerable: true, get: function () { return irp_1.irp; } });
+var iss_1 = require("./iss");
+Object.defineProperty(exports, "iss", { enumerable: true, get: function () { return iss_1.iss; } });
 var ivld_1 = require("./ivld");
 Object.defineProperty(exports, "ivld", { enumerable: true, get: function () { return ivld_1.ivld; } });
 var keewidb_1 = require("./keewidb");

package/tencentcloud/services/iss/index.d.ts

@@ -0,0 +1,6 @@
+export declare const iss: {
+    v20230517: {
+        Client: typeof import("./v20230517/iss_client").Client;
+        Models: typeof import("./v20230517/iss_models");
+    };
+};

package/tencentcloud/services/iss/index.js

@@ -0,0 +1,7 @@
+"use strict";
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.iss = void 0;
+const v20230517_1 = require("./v20230517");
+exports.iss = {
+    v20230517: v20230517_1.v20230517,
+};

package/tencentcloud/services/iss/v20230517/index.d.ts

@@ -0,0 +1,6 @@
+import * as Models from "./iss_models";
+import { Client } from "./iss_client";
+export declare const v20230517: {
+    Client: typeof Client;
+    Models: typeof Models;
+};

package/tencentcloud/services/iss/v20230517/index.js

@@ -0,0 +1,9 @@
+"use strict";
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.v20230517 = void 0;
+const Models = require("./iss_models");
+const iss_client_1 = require("./iss_client");
+exports.v20230517 = {
+    Client: iss_client_1.Client,
+    Models: Models
+};

package/tencentcloud/services/iss/v20230517/iss_client.d.ts

@@ -0,0 +1,313 @@
+import { AbstractClient } from "../../../common/abstract_client";
+import { ClientConfig } from "../../../common/interface";
+import { UpdateDeviceStatusRequest, ListDevicesRequest, DeleteRecordBackupPlanResponse, ListOrganizationChannelsRequest, AddRecordBackupPlanResponse, DescribeCNAMERequest, ControlRecordTimelineRequest, DeleteOrganizationRequest, CheckDomainResponse, DescribeCNAMEResponse, UpdateOrganizationResponse, ListAITasksResponse, UpdateDeviceOrganizationRequest, UpdateDeviceOrganizationResponse, AddOrganizationResponse, DescribeDeviceRegionResponse, DescribeDomainResponse, DescribeRecordBackupTemplateRequest, ControlDeviceStreamResponse, DeleteRecordRetrieveTaskResponse, DescribeUserDeviceResponse, DeleteRecordPlanResponse, DescribeOrganizationResponse, UpdateUserDeviceRequest, DescribeDeviceChannelResponse, AddRecordBackupTemplateRequest, DeleteAITaskRequest, UpdateGatewayResponse, DescribeRecordRetrieveTaskRequest, DescribeAITaskRequest, RefreshDeviceChannelResponse, DeleteOrganizationResponse, DescribeRecordTemplateRequest, DeleteRecordTemplateRequest, DescribeGatewayResponse, DescribeGatewayRequest, DeleteUserDeviceRequest, AddRecordPlanResponse, ListOrganizationChannelNumbersRequest, UpdateAITaskRequest, UpgradeGatewayResponse, DeleteDomainRequest, ListRecordRetrieveTasksRequest, DeleteRecordPlanRequest, AddRecordTemplateResponse, ListRecordPlansRequest, DescribeAITaskResultRequest, ListAITasksRequest, UpdateRecordPlanRequest, DescribeOrganizationRequest, UpdateAITaskStatusResponse, ControlRecordResponse, AddRecordPlanRequest, ListRecordTemplatesRequest, DescribeVideoDownloadUrlResponse, DescribeRecordPlanResponse, AddRecordRetrieveTaskRequest, DescribeRecordPlanRequest, ControlDevicePresetResponse, ListRecordBackupPlansResponse, DescribeDomainRequest, AddStreamAuthResponse, ListDevicesResponse, DescribeGatewayMonitorRequest, DeleteGatewayRequest, UpdateOrganizationRequest, ListOrganizationChannelNumbersResponse, ListRecordBackupTemplatesResponse, DescribeRecordPlaybackUrlRequest, ListRecordPlansResponse, DescribeRecordTemplateResponse, DescribeAITaskResultResponse, DescribeDevicePresetResponse, UpdateRecordBackupPlanRequest, ControlRecordRequest, ControlDevicePTZResponse, AddUserDeviceRequest, ListRecordBackupPlanDevicesResponse, ControlDevicePTZRequest, DescribeRecordBackupPlanRequest, DescribeRecordBackupPlanResponse, DescribeDeviceChannelRequest, UpdateUserDeviceResponse, DescribeDevicePresetRequest, ListGatewaysResponse, ListRecordPlanDevicesRequest, DescribeGatewayProtocolResponse, DescribeDomainRegionRequest, AddRecordTemplateRequest, DescribeGatewayProtocolRequest, AddAITaskRequest, DescribeVideoDownloadUrlRequest, DescribeGatewayVersionResponse, ListGatewaysRequest, DescribeGatewayVersionRequest, DescribeUserDeviceRequest, DescribeDeviceRegionRequest, RefreshDeviceChannelRequest, DescribeRecordFileRequest, AddStreamAuthRequest, PlayRecordRequest, CheckDomainRequest, UpgradeGatewayRequest, DescribeRecordFileResponse, ControlDevicePresetRequest, ControlDeviceStreamRequest, ListRecordRetrieveTasksResponse, ListRecordBackupPlanDevicesRequest, DeleteDomainResponse, AddRecordRetrieveTaskResponse, DeleteRecordTemplateResponse, ListRecordPlanDevicesResponse, ListRecordTemplatesResponse, DescribeAITaskResponse, UpdateRecordBackupTemplateResponse, ControlRecordTimelineResponse, DeleteRecordRetrieveTaskRequest, UpdateRecordPlanResponse, DeleteRecordBackupPlanRequest, ListRecordBackupTemplatesRequest, AddAITaskResponse, UpdateRecordTemplateRequest, DeleteRecordBackupTemplateRequest, DeleteAITaskResponse, AddRecordBackupTemplateResponse, PlayRecordResponse, DescribeGatewayMonitorResponse, DescribeRecordBackupTemplateResponse, AddUserDeviceResponse, DeleteGatewayResponse, DescribeRecordPlaybackUrlResponse, ListRecordPlanChannelsRequest, ListOrganizationChannelsResponse, UpdateAITaskStatusRequest, UpdateGatewayRequest, UpdateAITaskResponse, DescribeDomainRegionResponse, ListRecordPlanChannelsResponse, AddRecordBackupPlanRequest, ListRecordBackupPlansRequest, UpdateRecordBackupTemplateRequest, UpdateDeviceStatusResponse, DeleteUserDeviceResponse, UpdateRecordBackupPlanResponse, AddOrganizationRequest, DescribeStreamAuthResponse, DeleteRecordBackupTemplateResponse, UpdateRecordTemplateResponse, DescribeRecordRetrieveTaskResponse, DescribeStreamAuthRequest } from "./iss_models";
+/**
+ * iss client
+ * @class
+ */
+export declare class Client extends AbstractClient {
+    constructor(clientConfig: ClientConfig);
+    /**
+     * 用于删除实时上云模板
+     */
+    DeleteRecordTemplate(req: DeleteRecordTemplateRequest, cb?: (error: string, rep: DeleteRecordTemplateResponse) => void): Promise<DeleteRecordTemplateResponse>;
+    /**
+     * 用于启用/禁用设备，禁用后拒绝设备注册。
+     */
+    UpdateDeviceStatus(req: UpdateDeviceStatusRequest, cb?: (error: string, rep: UpdateDeviceStatusResponse) => void): Promise<UpdateDeviceStatusResponse>;
+    /**
+     * 用于修改网关信息（支持对网关名称和描述的修改）。
+     */
+    UpdateGateway(req: UpdateGatewayRequest, cb?: (error: string, rep: UpdateGatewayResponse) => void): Promise<UpdateGatewayResponse>;
+    /**
+     * 用于查询取回任务列表
+     */
+    ListRecordRetrieveTasks(req?: ListRecordRetrieveTasksRequest, cb?: (error: string, rep: ListRecordRetrieveTasksResponse) => void): Promise<ListRecordRetrieveTasksResponse>;
+    /**
+     * 用于删除已添加的设备。
+     */
+    DeleteUserDevice(req: DeleteUserDeviceRequest, cb?: (error: string, rep: DeleteUserDeviceResponse) => void): Promise<DeleteUserDeviceResponse>;
+    /**
+     * 用于查询设备的通道。
+     */
+    DescribeDeviceChannel(req: DescribeDeviceChannelRequest, cb?: (error: string, rep: DescribeDeviceChannelResponse) => void): Promise<DescribeDeviceChannelResponse>;
+    /**
+     * 用于删除录像上云模板。
+     */
+    DeleteRecordBackupTemplate(req: DeleteRecordBackupTemplateRequest, cb?: (error: string, rep: DeleteRecordBackupTemplateResponse) => void): Promise<DeleteRecordBackupTemplateResponse>;
+    /**
+     * 用于用户添加域名时，查询可以绑定的服务节点，结果为平台支持的所有服务节点。（注意：每个服务节点只能绑定一个域名）
+     */
+    DescribeDomainRegion(req?: DescribeDomainRegionRequest, cb?: (error: string, rep: DescribeDomainRegionResponse) => void): Promise<DescribeDomainRegionResponse>;
+    /**
+     * 用于查询组织目录下的通道列表
+     */
+    ListOrganizationChannels(req: ListOrganizationChannelsRequest, cb?: (error: string, rep: ListOrganizationChannelsResponse) => void): Promise<ListOrganizationChannelsResponse>;
+    /**
+     * 用于查询网关接入协议。
+     */
+    DescribeGatewayProtocol(req?: DescribeGatewayProtocolRequest, cb?: (error: string, rep: DescribeGatewayProtocolResponse) => void): Promise<DescribeGatewayProtocolResponse>;
+    /**
+     * 用于获取云端录像回放url地址
+     */
+    DescribeRecordPlaybackUrl(req: DescribeRecordPlaybackUrlRequest, cb?: (error: string, rep: DescribeRecordPlaybackUrlResponse) => void): Promise<DescribeRecordPlaybackUrlResponse>;
+    /**
+     * 用于查询录像上云模板详情。
+     */
+    DescribeRecordBackupTemplate(req: DescribeRecordBackupTemplateRequest, cb?: (error: string, rep: DescribeRecordBackupTemplateResponse) => void): Promise<DescribeRecordBackupTemplateResponse>;
+    /**
+     * 用于获取网关的数据及流量监控信息。
+     */
+    DescribeGatewayMonitor(req: DescribeGatewayMonitorRequest, cb?: (error: string, rep: DescribeGatewayMonitorResponse) => void): Promise<DescribeGatewayMonitorResponse>;
+    /**
+     * 用于查询录像上云计划列表。
+     */
+    ListRecordBackupPlans(req?: ListRecordBackupPlansRequest, cb?: (error: string, rep: ListRecordBackupPlansResponse) => void): Promise<ListRecordBackupPlansResponse>;
+    /**
+     * 查询网关服务版本
+     */
+    DescribeGatewayVersion(req: DescribeGatewayVersionRequest, cb?: (error: string, rep: DescribeGatewayVersionResponse) => void): Promise<DescribeGatewayVersionResponse>;
+    /**
+     * 更新AI任务
+     */
+    UpdateAITask(req: UpdateAITaskRequest, cb?: (error: string, rep: UpdateAITaskResponse) => void): Promise<UpdateAITaskResponse>;
+    /**
+     * 用于查询用户下所有实时上云计划中的通道列表
+     */
+    ListRecordPlanChannels(req?: ListRecordPlanChannelsRequest, cb?: (error: string, rep: ListRecordPlanChannelsResponse) => void): Promise<ListRecordPlanChannelsResponse>;
+    /**
+     * 用于添加设备时，查询设备可以使用的服务节点，查询结果为已经绑定了域名的服务节点。
+     */
+    DescribeDeviceRegion(req?: DescribeDeviceRegionRequest, cb?: (error: string, rep: DescribeDeviceRegionResponse) => void): Promise<DescribeDeviceRegionResponse>;
+    /**
+     * 用于新增组织。
+     */
+    AddOrganization(req: AddOrganizationRequest, cb?: (error: string, rep: AddOrganizationResponse) => void): Promise<AddOrganizationResponse>;
+    /**
+     * 用于查询设备通道预置位信息。
+     */
+    DescribeDevicePreset(req: DescribeDevicePresetRequest, cb?: (error: string, rep: DescribeDevicePresetResponse) => void): Promise<DescribeDevicePresetResponse>;
+    /**
+     * 用于查询实时上云计划列表
+     */
+    ListRecordPlans(req?: ListRecordPlansRequest, cb?: (error: string, rep: ListRecordPlansResponse) => void): Promise<ListRecordPlansResponse>;
+    /**
+     * 用于查询录像上云计划详情。
+     */
+    DescribeRecordBackupPlan(req: DescribeRecordBackupPlanRequest, cb?: (error: string, rep: DescribeRecordBackupPlanResponse) => void): Promise<DescribeRecordBackupPlanResponse>;
+    /**
+     * 用于查询设备云端录像时间轴信息（即为视频上云后设置录像计划后云存储的录像）
+     */
+    DescribeRecordFile(req: DescribeRecordFileRequest, cb?: (error: string, rep: DescribeRecordFileResponse) => void): Promise<DescribeRecordFileResponse>;
+    /**
+     * 用于查询云录像取回任务详情
+     */
+    DescribeRecordRetrieveTask(req: DescribeRecordRetrieveTaskRequest, cb?: (error: string, rep: DescribeRecordRetrieveTaskResponse) => void): Promise<DescribeRecordRetrieveTaskResponse>;
+    /**
+     * 用于查询设备的详细信息。
+     */
+    DescribeUserDevice(req: DescribeUserDeviceRequest, cb?: (error: string, rep: DescribeUserDeviceResponse) => void): Promise<DescribeUserDeviceResponse>;
+    /**
+     * 获取AI任务识别结果
+     */
+    DescribeAITaskResult(req: DescribeAITaskResultRequest, cb?: (error: string, rep: DescribeAITaskResultResponse) => void): Promise<DescribeAITaskResultResponse>;
+    /**
+     * 用于查询实时上云模板详情
+     */
+    DescribeRecordTemplate(req: DescribeRecordTemplateRequest, cb?: (error: string, rep: DescribeRecordTemplateResponse) => void): Promise<DescribeRecordTemplateResponse>;
+    /**
+     * 用于新建取回任务
+     */
+    AddRecordRetrieveTask(req: AddRecordRetrieveTaskRequest, cb?: (error: string, rep: AddRecordRetrieveTaskResponse) => void): Promise<AddRecordRetrieveTaskResponse>;
+    /**
+     * 用于根据服务节点获取 CNAME 值。
+     */
+    DescribeCNAME(req: DescribeCNAMERequest, cb?: (error: string, rep: DescribeCNAMEResponse) => void): Promise<DescribeCNAMEResponse>;
+    /**
+     * 用于新增单个设备。添加设备之后，可根据返回结果到设备上进行配置，配置后等待设备注册/推流。
+     */
+    AddUserDevice(req: AddUserDeviceRequest, cb?: (error: string, rep: AddUserDeviceResponse) => void): Promise<AddUserDeviceResponse>;
+    /**
+     * 添加AI任务
+     */
+    AddAITask(req: AddAITaskRequest, cb?: (error: string, rep: AddAITaskResponse) => void): Promise<AddAITaskResponse>;
+    /**
+     * 用于删除组织。
+     */
+    DeleteOrganization(req: DeleteOrganizationRequest, cb?: (error: string, rep: DeleteOrganizationResponse) => void): Promise<DeleteOrganizationResponse>;
+    /**
+     * 用于检测域名是否备案。
+     */
+    CheckDomain(req: CheckDomainRequest, cb?: (error: string, rep: CheckDomainResponse) => void): Promise<CheckDomainResponse>;
+    /**
+     * 用于批量更改设备的组织。
+     */
+    UpdateDeviceOrganization(req: UpdateDeviceOrganizationRequest, cb?: (error: string, rep: UpdateDeviceOrganizationResponse) => void): Promise<UpdateDeviceOrganizationResponse>;
+    /**
+     * 用于查询添加的域名列表。
+     */
+    DescribeDomain(req?: DescribeDomainRequest, cb?: (error: string, rep: DescribeDomainResponse) => void): Promise<DescribeDomainResponse>;
+    /**
+     * 用于获取设备的实时开流地址。
+     */
+    ControlDeviceStream(req: ControlDeviceStreamRequest, cb?: (error: string, rep: ControlDeviceStreamResponse) => void): Promise<ControlDeviceStreamResponse>;
+    /**
+     * 用于获取云录像下载 url
+     */
+    DescribeVideoDownloadUrl(req: DescribeVideoDownloadUrlRequest, cb?: (error: string, rep: DescribeVideoDownloadUrlResponse) => void): Promise<DescribeVideoDownloadUrlResponse>;
+    /**
+     * 用于刷新国标设备的通道（接口调用后，触发向设备请求通道列表，新增的通道入库，设备上已删除的通道需自行删除、后台不自动删除）。
+     */
+    RefreshDeviceChannel(req: RefreshDeviceChannelRequest, cb?: (error: string, rep: RefreshDeviceChannelResponse) => void): Promise<RefreshDeviceChannelResponse>;
+    /**
+     * 用于操作设备预置位，包括设置、删除、调用。
+     */
+    ControlDevicePreset(req: ControlDevicePresetRequest, cb?: (error: string, rep: ControlDevicePresetResponse) => void): Promise<ControlDevicePresetResponse>;
+    /**
+     * 用于修改组织。
+     */
+    UpdateOrganization(req: UpdateOrganizationRequest, cb?: (error: string, rep: UpdateOrganizationResponse) => void): Promise<UpdateOrganizationResponse>;
+    /**
+     * 用于查询实时上云计划详情
+     */
+    DescribeRecordPlan(req: DescribeRecordPlanRequest, cb?: (error: string, rep: DescribeRecordPlanResponse) => void): Promise<DescribeRecordPlanResponse>;
+    /**
+     * 用于修改实时上云计划
+     */
+    UpdateRecordPlan(req: UpdateRecordPlanRequest, cb?: (error: string, rep: UpdateRecordPlanResponse) => void): Promise<UpdateRecordPlanResponse>;
+    /**
+     * 用于获取网关详情。
+     */
+    DescribeGateway(req: DescribeGatewayRequest, cb?: (error: string, rep: DescribeGatewayResponse) => void): Promise<DescribeGatewayResponse>;
+    /**
+     * 用于网关升级（支持对所有待更新的服务一键升级）。
+     */
+    UpgradeGateway(req: UpgradeGatewayRequest, cb?: (error: string, rep: UpgradeGatewayResponse) => void): Promise<UpgradeGatewayResponse>;
+    /**
+     * 用于修改设备的配置信息。
+     */
+    UpdateUserDevice(req: UpdateUserDeviceRequest, cb?: (error: string, rep: UpdateUserDeviceResponse) => void): Promise<UpdateUserDeviceResponse>;
+    /**
+     * 用于删除实时上云计划
+     */
+    DeleteRecordPlan(req: DeleteRecordPlanRequest, cb?: (error: string, rep: DeleteRecordPlanResponse) => void): Promise<DeleteRecordPlanResponse>;
+    /**
+     * 用于新增实时上云模板
+     */
+    AddRecordTemplate(req: AddRecordTemplateRequest, cb?: (error: string, rep: AddRecordTemplateResponse) => void): Promise<AddRecordTemplateResponse>;
+    /**
+     * 用于新增实时上云计划
+     */
+    AddRecordPlan(req: AddRecordPlanRequest, cb?: (error: string, rep: AddRecordPlanResponse) => void): Promise<AddRecordPlanResponse>;
+    /**
+     * 用于查询组织目录下的未添加到实时上云计划中的通道数量
+     */
+    ListOrganizationChannelNumbers(req: ListOrganizationChannelNumbersRequest, cb?: (error: string, rep: ListOrganizationChannelNumbersResponse) => void): Promise<ListOrganizationChannelNumbersResponse>;
+    /**
+     * 用于修改录像上云计划。
+     */
+    UpdateRecordBackupPlan(req: UpdateRecordBackupPlanRequest, cb?: (error: string, rep: UpdateRecordBackupPlanResponse) => void): Promise<UpdateRecordBackupPlanResponse>;
+    /**
+     * 用于获取网关列表。
+     */
+    ListGateways(req: ListGatewaysRequest, cb?: (error: string, rep: ListGatewaysResponse) => void): Promise<ListGatewaysResponse>;
+    /**
+     * 用于查询组织。
+     */
+    DescribeOrganization(req?: DescribeOrganizationRequest, cb?: (error: string, rep: DescribeOrganizationResponse) => void): Promise<DescribeOrganizationResponse>;
+    /**
+     * 用于录像回放过程中的倍速、跳转、播放/暂停/停止等控制。
+     */
+    ControlRecord(req: ControlRecordRequest, cb?: (error: string, rep: ControlRecordResponse) => void): Promise<ControlRecordResponse>;
+    /**
+     * 用于获取对应组织下的设备列表。
+     */
+    ListDevices(req: ListDevicesRequest, cb?: (error: string, rep: ListDevicesResponse) => void): Promise<ListDevicesResponse>;
+    /**
+     * 用于查询录像上云模板列表。
+     */
+    ListRecordBackupTemplates(req?: ListRecordBackupTemplatesRequest, cb?: (error: string, rep: ListRecordBackupTemplatesResponse) => void): Promise<ListRecordBackupTemplatesResponse>;
+    /**
+     * 用于设备通道云台控制，包括转动、变倍、变焦、光圈等。
+     */
+    ControlDevicePTZ(req: ControlDevicePTZRequest, cb?: (error: string, rep: ControlDevicePTZResponse) => void): Promise<ControlDevicePTZResponse>;
+    /**
+     * 更新 AI 任务状态
+     */
+    UpdateAITaskStatus(req: UpdateAITaskStatusRequest, cb?: (error: string, rep: UpdateAITaskStatusResponse) => void): Promise<UpdateAITaskStatusResponse>;
+    /**
+     * 用于查询录像上云计划下的设备通道列表。
+     */
+    ListRecordBackupPlanDevices(req: ListRecordBackupPlanDevicesRequest, cb?: (error: string, rep: ListRecordBackupPlanDevicesResponse) => void): Promise<ListRecordBackupPlanDevicesResponse>;
+    /**
+     * 获取AI任务列表
+     */
+    ListAITasks(req: ListAITasksRequest, cb?: (error: string, rep: ListAITasksResponse) => void): Promise<ListAITasksResponse>;
+    /**
+     * 用于查询实时上云模板列表
+     */
+    ListRecordTemplates(req?: ListRecordTemplatesRequest, cb?: (error: string, rep: ListRecordTemplatesResponse) => void): Promise<ListRecordTemplatesResponse>;
+    /**
+     * 用于查询实时上云计划下的设备通道列表
+     */
+    ListRecordPlanDevices(req: ListRecordPlanDevicesRequest, cb?: (error: string, rep: ListRecordPlanDevicesResponse) => void): Promise<ListRecordPlanDevicesResponse>;
+    /**
+     * 删除AI任务
+     */
+    DeleteAITask(req: DeleteAITaskRequest, cb?: (error: string, rep: DeleteAITaskResponse) => void): Promise<DeleteAITaskResponse>;
+    /**
+     * 用于设置推拉流鉴权配置。
+     */
+    AddStreamAuth(req: AddStreamAuthRequest, cb?: (error: string, rep: AddStreamAuthResponse) => void): Promise<AddStreamAuthResponse>;
+    /**
+     * 用于修改实时上云模板
+     */
+    UpdateRecordTemplate(req: UpdateRecordTemplateRequest, cb?: (error: string, rep: UpdateRecordTemplateResponse) => void): Promise<UpdateRecordTemplateResponse>;
+    /**
+     * 用于删除取回任务
+     */
+    DeleteRecordRetrieveTask(req: DeleteRecordRetrieveTaskRequest, cb?: (error: string, rep: DeleteRecordRetrieveTaskResponse) => void): Promise<DeleteRecordRetrieveTaskResponse>;
+    /**
+     * 用于新增录像上云计划 （当前仅适用于通过GB28181协议和网关接入的设备/视频通道）
+     */
+    AddRecordBackupPlan(req: AddRecordBackupPlanRequest, cb?: (error: string, rep: AddRecordBackupPlanResponse) => void): Promise<AddRecordBackupPlanResponse>;
+    /**
+     * 用于查询推拉流鉴权配置。
+     */
+    DescribeStreamAuth(req?: DescribeStreamAuthRequest, cb?: (error: string, rep: DescribeStreamAuthResponse) => void): Promise<DescribeStreamAuthResponse>;
+    /**
+     * 用于查询设备本地录像时间轴信息，为NVR/IPC本地存储的录像。
+     */
+    ControlRecordTimeline(req: ControlRecordTimelineRequest, cb?: (error: string, rep: ControlRecordTimelineResponse) => void): Promise<ControlRecordTimelineResponse>;
+    /**
+     * 获取AI任务详情
+     */
+    DescribeAITask(req: DescribeAITaskRequest, cb?: (error: string, rep: DescribeAITaskResponse) => void): Promise<DescribeAITaskResponse>;
+    /**
+     * 用于删除录像上云模板。
+     */
+    DeleteRecordBackupPlan(req: DeleteRecordBackupPlanRequest, cb?: (error: string, rep: DeleteRecordBackupPlanResponse) => void): Promise<DeleteRecordBackupPlanResponse>;
+    /**
+     * 用于删除网关。
+     */
+    DeleteGateway(req: DeleteGatewayRequest, cb?: (error: string, rep: DeleteGatewayResponse) => void): Promise<DeleteGatewayResponse>;
+    /**
+     * 用于获取设备本地录像 URL 地址。
+     */
+    PlayRecord(req: PlayRecordRequest, cb?: (error: string, rep: PlayRecordResponse) => void): Promise<PlayRecordResponse>;
+    /**
+     * 用于删除域名。
+     */
+    DeleteDomain(req: DeleteDomainRequest, cb?: (error: string, rep: DeleteDomainResponse) => void): Promise<DeleteDomainResponse>;
+    /**
+     * 用于修改录像上云模板。
+     */
+    UpdateRecordBackupTemplate(req: UpdateRecordBackupTemplateRequest, cb?: (error: string, rep: UpdateRecordBackupTemplateResponse) => void): Promise<UpdateRecordBackupTemplateResponse>;
+    /**
+     * 用于新增录像上云模板。
+> 该功能本质是拉取设备本地录像数据上云（即存在 IPC 摄像头存储卡或 NVR 硬盘中的录像），操作时需先设定录像时间段（即想要上云的设备本地录像），再设定上云时间段和上云倍速，平台将于上云时间段倍速拉取设备对应前一天的录像时间段数据。
+
+> 设定需至少满足（上云时间段=前一天的录像时间段/上云倍速），建议上云时间段可多设定10%左右的时间，避免因网络波动导致数据拉取不完整。
+     */
+    AddRecordBackupTemplate(req: AddRecordBackupTemplateRequest, cb?: (error: string, rep: AddRecordBackupTemplateResponse) => void): Promise<AddRecordBackupTemplateResponse>;
+}