tencentcloud-sdk-nodejs 3.0.269 → 3.0.270

package/tencentcloud/bm/v20180423/bm_client.js

@@ -642,12 +642,14 @@ TaskStatus（任务状态ID）与状态中文名的对应关系如下：<br>
 AuthorizeRepair（授权维修）<br>
 Ignore（暂不提醒）<br>
 ConfirmRecovered（维修完成后，确认故障恢复）<br>
-ConfirmUnRecovered（维修完成后，确认故障未恢复）<br>
+ConfirmUnRecovered（维修完成后，确认故障未恢复，该操作已不推荐用）<br>
+NeedRepairAgain（维修完成后，故障未恢复，需要重新维修，推荐用此操作打回）<br>
+入参OperateRemark仅在Operate为NeedRepairAgain时有效，表示打回重修原因，建议给出打回的具体原因。<br>
 <br>
 操作约束（当前任务状态(TaskStatus)->对应可执行的操作）：<br>
 未授权(1)->授权维修；暂不处理<br>
 暂不处理(4)->授权维修<br>
-待确认(3)->确认故障恢复；确认故障未恢复<br>
+待确认(3)->确认故障恢复；确认故障未恢复；需要重新维修<br>
 未恢复(6)->确认故障恢复<br>
 <br>
 对于Ping不可达故障的任务，还允许：<br>

package/tencentcloud/bm/v20180423/models.js

@@ -6470,7 +6470,7 @@ class DescribeDevicesRequest extends  AbstractModel {
         this.Offset = null;
 
         /**
-         * 返回数量
+         * 返回数量，默认为20，最大值为100。
          * @type {number || null}
          */
         this.Limit = null;
@@ -6571,6 +6571,12 @@ class DescribeDevicesRequest extends  AbstractModel {
          */
         this.Order = null;
 
+        /**
+         * 按照维保方式过滤。可取值为 Maintain: 在保;  WillExpire: 即将过保; Expire: 已过保
+         * @type {string || null}
+         */
+        this.MaintainStatus = null;
+
     }
 
     /**
@@ -6606,6 +6612,7 @@ class DescribeDevicesRequest extends  AbstractModel {
         this.IsLuckyDevice = 'IsLuckyDevice' in params ? params.IsLuckyDevice : null;
         this.OrderField = 'OrderField' in params ? params.OrderField : null;
         this.Order = 'Order' in params ? params.Order : null;
+        this.MaintainStatus = 'MaintainStatus' in params ? params.MaintainStatus : null;
 
     }
 }
@@ -6851,6 +6858,12 @@ class RepairTaskControlRequest extends  AbstractModel {
          */
         this.Operate = null;
 
+        /**
+         * 需要重新维修操作的备注信息，可提供返场维修原因，以便驻场快速针对问题定位解决。
+         * @type {string || null}
+         */
+        this.OperateRemark = null;
+
     }
 
     /**
@@ -6862,6 +6875,7 @@ class RepairTaskControlRequest extends  AbstractModel {
         }
         this.TaskId = 'TaskId' in params ? params.TaskId : null;
         this.Operate = 'Operate' in params ? params.Operate : null;
+        this.OperateRemark = 'OperateRemark' in params ? params.OperateRemark : null;
 
     }
 }
@@ -6998,7 +7012,7 @@ class DeviceInfo extends  AbstractModel {
 
         /**
          * 设备操作状态ID，取值：
-<li>1：运行中</li><li>2：正在关机</li><li>3：已关机</li><li>5：正在开机</li><li>7：重启中</li><li>9：重装中</li><li>12：绑定EIP</li><li>13：解绑EIP</li><li>14：绑定LB</li><li>15：解绑LB</li><li>19：更换IP中</li><li>20：制作镜像中</li><li>21：制作镜像失败</li><li>23：故障待重装</li>
+<li>1：运行中</li><li>2：正在关机</li><li>3：已关机</li><li>5：正在开机</li><li>7：重启中</li><li>9：重装中</li><li>12：绑定EIP</li><li>13：解绑EIP</li><li>14：绑定LB</li><li>15：解绑LB</li><li>19：更换IP中</li><li>20：制作镜像中</li><li>21：制作镜像失败</li><li>23：故障待重装</li><li>24：无备件待退回</li>
          * @type {number || null}
          */
         this.OperateStatus = null;
@@ -7117,6 +7131,20 @@ class DeviceInfo extends  AbstractModel {
          */
         this.IsLuckyDevice = null;
 
+        /**
+         * 标识机器维保状态。Maintain: 在保;  WillExpire: 即将过保; Expire: 已过保
+注意：此字段可能返回 null，表示取不到有效值。
+         * @type {string || null}
+         */
+        this.MaintainStatus = null;
+
+        /**
+         * 维保信息描述
+注意：此字段可能返回 null，表示取不到有效值。
+         * @type {string || null}
+         */
+        this.MaintainMessage = null;
+
     }
 
     /**
@@ -7158,6 +7186,8 @@ class DeviceInfo extends  AbstractModel {
         this.VpcCidrBlock = 'VpcCidrBlock' in params ? params.VpcCidrBlock : null;
         this.SubnetCidrBlock = 'SubnetCidrBlock' in params ? params.SubnetCidrBlock : null;
         this.IsLuckyDevice = 'IsLuckyDevice' in params ? params.IsLuckyDevice : null;
+        this.MaintainStatus = 'MaintainStatus' in params ? params.MaintainStatus : null;
+        this.MaintainMessage = 'MaintainMessage' in params ? params.MaintainMessage : null;
 
     }
 }

package/tencentcloud/bsca/index.js

@@ -0,0 +1,3 @@
+module.exports = {
+    v20210811: require("./v20210811"),
+};

package/tencentcloud/bsca/v20210811/bsca_client.js

@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2018 THL A29 Limited, a Tencent company. All Rights Reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+const models = require("./models");
+const AbstractClient = require('../../common/abstract_client')
+const DescribeKBComponentVulnerabilityRequest = models.DescribeKBComponentVulnerabilityRequest;
+const ComponentVulnerabilityUnion = models.ComponentVulnerabilityUnion;
+const LicenseUnion = models.LicenseUnion;
+const DescribeKBComponentVulnerabilityResponse = models.DescribeKBComponentVulnerabilityResponse;
+const LicenseSummary = models.LicenseSummary;
+const Qualifier = models.Qualifier;
+const CVSSV3Info = models.CVSSV3Info;
+const Component = models.Component;
+const DescribeKBVulnerabilityResponse = models.DescribeKBVulnerabilityResponse;
+const DescribeKBLicenseResponse = models.DescribeKBLicenseResponse;
+const VulnerabilityUnion = models.VulnerabilityUnion;
+const LicenseDetail = models.LicenseDetail;
+const DescribeKBVulnerabilityRequest = models.DescribeKBVulnerabilityRequest;
+const VulnerabilityDetail = models.VulnerabilityDetail;
+const DescribeKBComponentResponse = models.DescribeKBComponentResponse;
+const VulnerabilitySummary = models.VulnerabilitySummary;
+const DescribeKBLicenseRequest = models.DescribeKBLicenseRequest;
+const CVSSV2Info = models.CVSSV2Info;
+const DescribeKBComponentRequest = models.DescribeKBComponentRequest;
+const LicenseRestriction = models.LicenseRestriction;
+const ComponentVulnerabilitySummary = models.ComponentVulnerabilitySummary;
+const PURL = models.PURL;
+
+
+/**
+ * bsca client
+ * @class
+ */
+class BscaClient extends AbstractClient {
+
+    constructor(credential, region, profile) {
+        super("bsca.tencentcloudapi.com", "2021-08-11", credential, region, profile);
+    }
+    
+    /**
+     * 本接口(DescribeKBComponentVulnerability)用于在知识库中查询开源组件的漏洞信息。
+     * @param {DescribeKBComponentVulnerabilityRequest} req
+     * @param {function(string, DescribeKBComponentVulnerabilityResponse):void} cb
+     * @public
+     */
+    DescribeKBComponentVulnerability(req, cb) {
+        let resp = new DescribeKBComponentVulnerabilityResponse();
+        this.request("DescribeKBComponentVulnerability", req, resp, cb);
+    }
+
+    /**
+     * 本接口(DescribeKBComponent)用于在知识库中查询开源组件信息。本接口根据用户输入的PURL在知识库中寻找对应的开源组件，其中Name为必填字段。
+     * @param {DescribeKBComponentRequest} req
+     * @param {function(string, DescribeKBComponentResponse):void} cb
+     * @public
+     */
+    DescribeKBComponent(req, cb) {
+        let resp = new DescribeKBComponentResponse();
+        this.request("DescribeKBComponent", req, resp, cb);
+    }
+
+    /**
+     * 本接口(DescribeKBLicense)用于在知识库中查询许可证信息。
+     * @param {DescribeKBLicenseRequest} req
+     * @param {function(string, DescribeKBLicenseResponse):void} cb
+     * @public
+     */
+    DescribeKBLicense(req, cb) {
+        let resp = new DescribeKBLicenseResponse();
+        this.request("DescribeKBLicense", req, resp, cb);
+    }
+
+    /**
+     * 本接口(DescribeKBVulnerability)用于在知识库中查询漏洞详细信息，支持根据CVE ID查询或者根据Vul ID查询。
+     * @param {DescribeKBVulnerabilityRequest} req
+     * @param {function(string, DescribeKBVulnerabilityResponse):void} cb
+     * @public
+     */
+    DescribeKBVulnerability(req, cb) {
+        let resp = new DescribeKBVulnerabilityResponse();
+        this.request("DescribeKBVulnerability", req, resp, cb);
+    }
+
+
+}
+module.exports = BscaClient;

package/tencentcloud/bsca/v20210811/index.js

@@ -0,0 +1,4 @@
+module.exports = {
+    Client: require("./bsca_client"),
+    Models: require("./models"),
+};